Uncocked position Pull Plunger back to cock Insert Adapter into Plunger Shaft

ADAPTER(installed)

PLUNGER PLUNGER KNOB

CLASPRETAINER

TRIGGER

EARRINGHEAD

POST

CLASP

STUDS CLASPS

BLISTER PACK PLASTIC MOUNT

Make sure Adapter is fully seated Return in uncocked position

CAFLON Instrument

Loading the Adapter

Ear piercing Stud and Instrument

After piercing care is themost important factorin keeping pierced earshealthy.

Place the ear betweenthe clasp retainer andthe stud. Align the pointof the stud with the markon the ear. Slowly squeezethe trigger until the ear isheld securely by theinstrument.

Keeping al ignmentto the mark, continueto squeeze the triggeruntil it releases theplunger.The ear will be piercedand the clasp will beautomatically installedon the stud’s postwith proper spacing.

Carefully release the triggerand pull the instrumentstraight down from the ear.

Repeate procedure for additional ear piercings.

Position plastic mountwith stud on the bottomand the clasp at the top.

Give to the customer the signed after-piercing careinstructions to take home with them.

Insert one stud head intostud adapter then pull themount straight up to releasethe stud from the mount.

Keep the instrument in theupright position, slide thecorresponding clasp into theclasp retainer at the end ofthe instrument.

Caflon ear piercing instrumentwith installed stud and clasp

Loading the Instrument with stud and clasp

Ear Piercing with CAFLON Instrument