motor cycle sprocket perfactly deburred
TRANSCRIPT
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 1/8
8-A, Vaibhav Industrial Estate, Baji Pasalkar Marg, Mumbai - 400 072, INDIA.Tel. +91-22-28570339 / 67488999,
E-mail’s: [email protected] & [email protected] Web site: www.imexsu.com & www.de-burring.com
These photos and notes are copyright protected property of IMEXSU. Copying and distribution without permission is prohibited. Get in touch with yourProblems of DeBurring & Surface Preparation. We offer complete Solutions.
Pioneer in Soft Abrasives since 1983 in INDIA offer Consultancy, Products, Consumable and Machines in Business since 1976
Motorcycle SprocketMotorcycle SprocketMotorcycle SprocketMotorcycle Sprocket
The above photo shows top sprocket - Punched and Machined wherethe teeth are sharp.The bottom photo – is after results of DeBurring process with ourDeBurring system where, one can easily observe the Radius generatedand sharp edges removed from every tooth.
This helps to:• Reduce wear & tear on chain (means longer life),
• Noise level reduced,
• Horse power requirement reduced,
• Torque reduced,
• Down-time for maintenance reduced,
• You can call it fit for Race / Pro,
• If you have chain grease /oil bath no loose particle initial,
And all this just you can do with minimal cost and adjustment in existingpresent system easily. End Result – Quality Product, Reduction in cycletime and cutting down production cost per piece…
Before and After photo speaks thousand words about the changes.. .
IMEXSU
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 2/8
See the difference in punching opening at 4 places of sprocket, though itis not playing any importance other then the weight reduction, but theloose particles and sharp edges comes free in production, particularlyafter facing both the sides,
Here you can see the right window before and left after, same time youare going to get the benefit of tooth DeBurring,
Below is the photo of whole sprocket, after DeBurr, Note on top left cavity,
the sharp edge which is a part of Metal – not Burr, portion remains there
IMEXSU
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 3/8
IMEXSU
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 4/8
IMEXSU
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 5/8
IMEXSU
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 6/8
IMEXSU
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 7/8
IMEXSU
8/14/2019 Motor Cycle Sprocket Perfactly DeBurred
http://slidepdf.com/reader/full/motor-cycle-sprocket-perfactly-deburred 8/8
8-A, Vaibhav Industrial Estate, Baji Pasalkar Marg, Mumbai - 400 072, INDIA.Tel. +91-22-28570339 / 67488999,
E-mail’s: [email protected] & [email protected] Web site: www.imexsu.com & www.de-burring.com
These photos and notes are copyright protected property of IMEXSU. Copying and distribution without permission is prohibited. Get in touch with yourProblems of DeBurring & Surface Preparation. We offer complete Solutions.
IMEXSU