www.weg.net

Motors | Energy | Automation | Coatings

Solutions for Agriculture

Motors | Automation | Energy | Transmission & Distribution | Coatings

www.weg.net

2 Solutions for Agriculture

Motor Applications:

Single Phase TEFC Farm Duty Motor g High starting torque and moderate starting current applications.g Product Highlights: V-ring slinger in both drive and opposite drive ends, reversible shaft rotation and start capacitors provide versatility for indoor and outdoor use. The manual overload protection available in all frames protects against extreme overloads, offering maximum operator safety.g 1/3 to 10HPg 230V or 115/230Vg 1.15 Service Factor

Single Phase TEAO Poultry Fan Motor g For agricultural fan applications. g Product Highlights: Mounted within the airstream for proper cooling, the totally enclosed design ensures long life in poultry house and barn exhaust fan applications.g 1/3 to 1HPg 115/208-230Vg 1.15 to 1.25 Service Factorg Available in rigid or resilient base

Single Phase TEFC Auger Drive Motorg For Feed-drive units requiring a reliable and efficient motor. g Product Highlights: Mechanical protection of centrifugal switch (to prevent damage to the motor in case of overspeed,) manual thermal overload protection and two bolts mounting NEMA “N” flange.g 1/3 to 1.5HPg 115/230Vg 1.15 Service Factor

WEG’s line of Farm Duty motors are perfect for harsh outdoor environments characterized by water, dirt, and humidity. Motor applications include auger drives, crop drying, hay bale conveyors, irrigation, ventilation, and more. WEG motors can be mounted at any angle and are available with C-face and D-flanges from stock.

Motors

Need a 3-phase motor but only have single phase input?WEG CFW09/CFW10 variable frequency drives can perform the necessary

power conversion. See our “Automation” section for additional details.

g Irrigation Pumpsg Well Pumpsg Grain Dryers and elevatorsg Conveyorsg Augers

g Poultry House Fansg Blowersg Pelletizersg Centrifugesg Kilns

Solutions for Agriculture

www.weg.net

3

Motor

Irrigation Generatorg Power: up to 2500kVA g Low voltage: 110 to 690 V g Frequency: 50 and 60 Hzg Degree of Protection: IPW23 (IP44W, IP55W upon request) g Insulation class: H (low voltage)g Number of poles: 4

Energy

3-Phase General Purpose Rolled Steel Motorsg Lighter weight and more affordable alternative to cast iron motors.g ¼ to 20HPg 208-230/460Vg 1.15 Service Factor

3-Phase Severe Duty Cast Iron Motorsg Perfect for severe duty conditions.g 1 to 700HPg 208-230/460V; 460V; 575Vg 1.25 Service Factor up to 100HP; 1.15 on 125HP and up

WEG motors can be mounted at any angle and are available with C-face and D-flanges from stock

www.weg.net

4 Solutions for Agriculture

Variable Frequency Drives Our WEG CFW10 and CFW09 variable frequency drives convert single phase 115 or 230 volt input power to three phase 230 volts without the need for a transformer. They are Capable of operating in ambient temperatures up to 122°F (50°C) without derating.

CFW10 Single Phase / 3-Phase ConverterThis small, easily mounted drive controls 3-phase AC motors with a single phase AC input.

g Single Phase 110-127V input voltage up to 1 HPg Single Phase 200–240V input voltage up to 3 HPg IP20 finger safe enclosureg Non-configurable drive

CFW9 Single Phase / 3-Phase ConverterCFW09 VFD has been applied successfully on single-phase ap-plications driving up to 125HP motor in a custom built WEG VFD cabinet with bus capacitors.

g Single or 3-Phase 230V input voltage up to 3HPg 3-Phase 230V input voltage up to 75HPg 3-Phase 460V input voltage up to 500HPg NEMA 1 enclosureg Configurable driveg Robust DC Bus - Custom applications are created in reduced lead times with WEG’s in house VFD panel engineering and manufacturing in Duluth, GA.

AutomationWEG’s line of Farm Duty automation products are perfect for harsh outdoor environments characterized by water, dirt, and humidity. Automation applications include variable frequency drives to convert single to 3-phase power,irrigation pump panels, controls, and enclosed starters perfect for auger drives, crop drying, hay bale conveyors, irrigation, ventilation, and more.

Solutions for Agriculture

www.weg.net

5

Irrigation Pump Panels

g Made in the USA, WEG’s custom VFD panel solutions operate as speed set point controlled or with feedback from pressure or flow sensor, stand-alone or PID systems depending on analog input of pressure and flow requirements.g Multi-Pump VFD panels control more than one pump with a single VFD and on-board PLC.g Custom Soft Starter panel solutions with AC1 or AC3 bypass contactor as specified by you.g Multiple drives and soft starters can be mounted in a common enclosure for more convenient installation.g Contact your WEG Sales Representative today for a quote.

Enclosed Starters

g PESW - non metallic enclosure, NEMA 4Xg ESWA – combination with fusible disconnectg ESWC – combination with circuit breakerg Part Winding Starter

g Branch Disconnect: Rotary through-the-door handleg Short-Circuit Protection: Type J Fuses or Circuit Breakerg Motor Control: Magnetic Contactorg Overload Protection: Thermal Overload Relayg Control Devices: Hand-Off-Auto switch, Start-Stop andg Reset pushbutton

g Wye Delta Starters g Combination and Non-Combination magnetic startersg ESWX – Explosion Proof non combination startersg Magnetic motor starters in stock ‘or built to order. Contact your WEG Sales Representative for specific availability.

Automation

www.weg.net

6 Solutions for Agriculture

Controls

g Mini - Contactors: up to 15 hp @ 460 v or 25 amps - highest rating in industryg Contactors: up to 600 hp @ 460v or 800 ampsg Thermal Overload Relays: class 10, phase loss, current unbalanceg Manual Motor Protectors: motor circuit protection, manual disconnectg Smart Relay: low voltage motor management systemg Pushbuttons & Pilot Lights: 22 mm & 30 mm available - LED pilot lights one of brightest in industryg Timing & Motor Protection Relays: (8) timing functions, phase loss, phase sequence, over & under voltage, motor temperatureg Enclosed Starters: combination & non-combination, metal & non-metal housingsg Terminal Blocks: screw terminal & spring connection availableg Molded Case Circuit Breakers: up to 800Amps, thermal & magnetic adjusted, 35kA & 65kA SCCR

Automation

Solutions for Agriculture 7

www.weg.net

Whatever your agriculture needs, WEG can provide the complete quality solution that can stand up to harsh outdoor environments at a fair price.

Solutions for Agriculture

Contact 1-800-ASK-4WEG to learn more about WEG’s Solutions for Agriculture

www.weg.net

WEG ELECTRIC CORP.6655 Sugarloaf ParkwayDuluth, GA 30097Phone: 1-800-ASK-4WEGFax: 1-770-338-1632info-us@weg.netwww.weg.net/us

US

A59

1

Please contact your authorized distributor:

WEG Electric Corp. offers the following products, and more! With a full range of IEC/NEMA Global Certifications and a full line of products, WEG can supply the right solution for your needs anywhere in the world. To learn more about WEG’s products and solutions or to locate a Distributor near you, please call 1-800-ASK-4WEG or visit www.weg.net/us.

Low Voltage Motors,

Single and 3-Phase, 1/8 – 700HP

General Purpose Motors

Explosion Proof Motors

Crusher Duty Motors

IEC Tru-Metric Motors

Pump Motors including JP/JM

P-Base Pump Motors

Oil Well Pumping Motors

Pool & Spa Motors

Brake Motors

Compressor Duty Motors

Farm Duty Motors

Poultry Fan Motors

Auger Drive Motors

IEEE 841 Motors

Stainless Steel Wash Down Motors

Saw Arbor Motors

Cooling Tower Motors

Commercial HVAC Motors

Pad Mounted Motors

Vector Duty Motors

Large Electric Motors

Low Voltage 3-phase motors up to 2,500HP

Motors up to 70,000HP and 13,200V

Wound Rotor Systems (including starters) up to 70,000HP and 13,200V

Synchronous Motors up to 70,000HP and 13,200V

Explosion proof motors (Ex-d) up to 1,500kW and 11kV

Ex-n, Ex-e, Ex-p motors

Variable Frequency Drives

Low Voltage 1/4 to 2500HP, 230V – 480V

Medium Voltage 500-8000HP

Multi-pump systems

NEMA 4X

Dynamic braking resistors

Line and load reactors

Plug and play technology

Network communications: Profibus-DP, DeviceNet, Modbus-RTU

PLC functions integrated

Complete line of options and accessories

Soft Starters

3-1500HP

Oriented start-up

Built-in bypass contactor

Universal source voltage (230-575V, 50/60Hz)

Network communications: Profibus-DP, DeviceNet, Modbus-RTU

Complete Line of options and accessories

MV Soft-starter 3.3kV, 4.16kV: up to

3500HP, Withdrawable Power Stacks, & 8x PT100 Temperature monitoring

Controls

Mini – Contactors

IEC Contactors

Thermal Overload Relays

Manual Motor Protectors

Molded Case Circuit Breakers

Smart Relays

Enclosed Starters: combination & non-combination,

Pushbuttons & Pilot Lights

Timing & Motor Protection Relays

Terminal Blocks

Custom Panels

Custom configured to your specification.

NEMA 1, 12, 3R, 4 and 4X cabinets

Quick delivery of preconfigured drives

and soft starters

UL 508 certified

Low Voltage (230-460)

Made in the U.S.A.

Generators

Brushless Synchronous Generators for diesel gen-sets up to 4,200kVA

Hydro-generators up to 25,000kVA

Turbo-generators up to 62,500kVA

Power Transformers

Built and engineered in North America

Voltages < 500kV

Ratings 5-300MVA

Station class, oil filled, round core, copper windings

Special configurations and designs available!

Ask your WEG Sales Representative for details.

Designed, built, and engineered to ANSI standards.

Custom Solution Package Sales

WEG can package any of its products for ease of sale! Enjoy a single point of contact for the entire package of products and

assistance from quote through after-sales support. Ask your WEG Sales Representative for details.