moulding selection guide - barrie ontario...moulding selection guide 7 8 moulding selection guide...
TRANSCRIPT
-
www.barrietrim.com
MOULDING SELECTION GUIDE
2011•2012
-
ARCHITRAVES: In cl assical architecture, it described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors.
BASEBOARDS: Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.
BUILD-UPS: Combining two or more moulding profiles to create a new or custom look. Also called stacking, build-ups make it easy to create the look of custom made trimwork without the high cost.
CASING: Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
CROWNS: Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.
FINISH BOARDS: Finish Boards come in either S4S (Surfaced 4 Sides) or S3S (Surfaced 3 Sides) and are used for a multitude of purposes including shelving, window liner, bases, casing, etc.
PANEL MOULDS: Panel Moulds are used to frame wall paneling and add an accent to your walls. Often used in furniture construction.
RAKE MOULD: Rakes are often used as crowns. In fact, they are sometimes called “solid crowns”.
WAINSCOT: Trimwork installed in the area below a chair rail. Numerous options are available including raised panel, shadow box and beaded. Combined with a chair rail and baseboard, Wainscoting creates a dramatic look to any room.
WINDOW STOOL: Also called window sill, a Window Stool is the surface installed below the sash of a window. Trim installed under window stool creates a distinctive look and adds a decorative touch.
1
2
3
4
5
6
7
8
9
10
Table of Contents1 Contents/Glossary
3 MouldingGallery
4 DesignerSeriesMouldings
10 PrimedMDFMouldings
25 FrenchDoors
26 MouldedPanelDoors
28 WoodPanelDoors
29 Safe‘NSoundSolidCoreDoors
30 Raw&PrimedFJPineMouldings
40 MahoganyMouldings
44 S4S&Accessories
47 Combinations
54 GreenBuildingInitiative
CoDe
SPeCIeS
DeSCRIPtIoN
PIeCeSPeRBUNDLe
BUNDLeCoLUMN
PRoFILeDIMeNSIoNS
GLOSSARY OF TERMSBASE SHOES: Base shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the base. However, this versatile profile works great to solve numerous trimming needs.
BATTENS/OPEN TRIM: A Batten/Open Trim is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards.
BEADED CEILING: A popular profile used often as wainscot paneling. Combined with a chair rail or cap mould and a baseboard, beaded ceiling makes a distinctive wainscot package.
BRICKMOULDS: A Brickmould is mainly used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2 and 1-1/4 inch sizes are available. Brickmoulds can also be used in place of a crown, and as a transition under window sills.
BULLNOSE: A term used to describe the eased edges of trim and stops. A single bullnose stop would have one eased edge and a square edge back. A double bull nose stop would have two eased edges.
CHAIR RAILS: Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of chairs as well as adding a beautiful accent to any room.
CORNERS: Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a wide variety of sizes and detailing.
COVES: Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications.
DENTIL: A moulding pattern with a series of closely spaced rectangular blocks and spaces. Used especially in classic architecture.
DOOR STOPS: The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs.
FULL ROUNDS: Full Rounds are used for numerous purposes and projects. Some of the more common uses are closet poles, curtain rods and towel rods.
HALF ROUNDS: A cross section of a Half Round looks like a half circle and is used primarily as decorative trim. It works well as a trim piece for wall paper or to add a decorative pattern to flat panels. This profile can also be used to put a rounded edge on various shelving.
HANDRAILS: Handrails provide safety and support.
QUARTER ROUNDS: Quarter Rounds come in several sizes and serve a variety of functions. They are most often used with baseboards.
RETURN: Term used to indicate the method of carrying a mouldings detail from the front of the moulding back to the wall. Generally a 45 degree cut is made to the front of the long moulding and an opposite 45 is cut on a small piece to carry the detail to the wall.
SCREEN MOULD: A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall paper etc.
3 8
910
4
5
6
7
1
2
M&M# Casing BDL8075 11/16˝ x 2-7/8˝ MDF 5
-
Making Interiors Spectacular
Moulding gallery
making interiors spectacular
Making Interiors Spectacular
Contemporary MDF Mouldings
Designer Series
-
Moulding Selection Guide
5 6
Moulding Selection GuideCasings
Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
ALL SIZES NOMINAL
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Baseboards
M&M# Casing BDL356 1/2˝ x 2-1/4˝ MDF 5
M&M# Casing BDL8037 3/4˝ x 2-3/4˝ MDF 5
M&M# Casing BDL8070 3/4˝ x 2-3/4˝ MDF 5
M&M# Casing BDL8075 11/16˝ x 2-7/8˝ MDF 5
M&M# Casing BDL8857 3/4˝ x 3-1/4˝ MDF 5
M&M# Casing BDL8039 3/4˝ x 3-1/2˝ MDF 5
M&M# Casing BDL8087 1-1/16˝ x 3-1/2˝ MDF 5
M&M# Baseboard BDL8275 9/16˝ x 5-1/4˝ MDF 5
M&M# Baseboard BDL8237 5/8˝ x 5-1/2˝ MDF 5
M&M# Baseboard BDL8270 5/8˝ x 5-1/4˝ MDF 5
-
Moulding Selection Guide
7 8
Moulding Selection Guide
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Baseboards CrownsCrowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
M&M# Baseboard BDL8671 11/16˝ x 7-1/16˝ MDF 5
M&M# Baseboard BDL8287 5/8˝ x 7-1/4˝ MDF 5
M&M# Baseboard BDL8239 5/8˝ x 7-1/4˝ MDF 5
M&M# Crown BDL8558 13/16˝ x 5-5/8˝ MDF 5
M&M# Crown BDL43 1˝ x 6-15/16˝ MDF 5
M&M# Crown BDL8545 11/16˝ x 4-5/8˝ MDF 5
-
PRIMEDMDFMoULDINGS
PRIMEDMDFMoULDINGS• LightWeight
• Installswithease
• SuperiorPaintability
• SuperiorWorkabilty
PRIM
ED M
DF
9
Moulding Selection Guide
Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
Crowns
M&M# Crown BDL8571 1˝ x 7-1/4˝ MDF 5
-
Moulding Selection Guide
11 12
Moulding Selection Guide
M&M# Casing BDL8063 11/16˝ x 3-1/4˝ Primed MDF 6
M&M# Casing BDL411 11/16˝ x 3˝ Primed MDF 6
M&M# Casing BDL535 11/16˝ x 3-1/2˝ Primed MDF 6
M&M# Casing BDL8032 9/16˝ x 2-5/8˝ Primed MDF 6
M&M# Casing BDL8233 9/16˝ x 3-1/4˝ Primed MDF 6
M&M# Casing BDL908 9/16˝ x 3-1/4˝ Primed MDF 7
M&M# Casing BDL8038CB 1˝ x 3˝ Primed MDF 6
M&M# Casing BDL8977 3/4˝ x 3-1/16˝ Primed MDF 5
M&M# Casing BDL2900CB 1˝ x 3˝ Primed MDF 6
CasingsCasings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
ALL SIZES NOMINAL
CasingsCasings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
ALL SIZES NOMINAL
M&M# Casing BDL8900 5/8˝ x 2-3/4˝ Primed MDF 58900B 5/8˝ x 2-3/4˝ Primed MDF 5
-
Moulding Selection Guide
13 14
Moulding Selection Guide
M&M# Casing BDL8062B 3/4˝ x 3-7/8˝ Primed MDF 5
M&M# Casing BDL8954 3/4˝ x 3-1/2˝ Primed MDF 5
M&M# Casing BDL8031 3/4˝ x 3-1/2˝ Primed MDF 5
M&M# Casing BDL8065 3/4˝ x 3-1/2˝ Primed MDF 5
CasingsCasings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
ALL SIZES NOMINAL
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Baseboards
M&M# Baseboard BDL8622B 3/8˝ x 3-1/8˝ Primed MDF 5
M&M# Baseboard BDL8910 3/8˝ x 3-7/8˝ Primed MDF 58706 3/8˝ x 3-7/8˝ Primed MDF 5
M&M# Baseboard BDL8857 3/8˝ x 3-1/4˝ Primed MDF 5
M&M# Baseboard BDL205 1/2˝ x 3-7/8˝ Primed MDF 6
M&M# Baseboard BDL8243 1/2˝ x 4-1/4˝ Primed MDF 5
M&M# Casing BDL8044 1-3/16˝ x 3-1/2˝ Primed MDF 80´
-
Moulding Selection Guide
15 16
Moulding Selection Guide
M&M# Baseboard BDL412 9/16˝ x 4-1/4˝ Primed MDF 6
M&M# Baseboard BDL545 9/16˝ x 5˝ Primed MDF 2
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
BaseboardsM&M# Baseboard BDL8955 5/8˝ x 5-9/16˝ Primed MDF 5
M&M# Baseboard BDL206 9/16˝ x 5-1/4˝ Primed MDF 5
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Baseboards
M&M# Baseboard BDL8095 1/2˝ x 5-1/4˝ Primed MDF 5
M&M# Baseboard BDL2518 3/8˝ x 5-1/2˝ Primed MDF 5
M&M# Baseboard BDL8234 9/16˝ x 5-1/2˝ Primed MDF 5
M&M# Baseboard BDL8334 1/2˝ x 5-1/2˝ Primed MDF
-
Moulding Selection Guide
17 18
Moulding Selection Guide
M&M# Baseboard BDL8915 1/2˝ x 7-1/4˝ Primed MDF 5
M&M# Baseboard BDL8235 5/8˝ x 7-1/4˝ Primed MDF 5
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Baseboards
M&M# Crown BDL8048B 9/16˝ x 4-1/8˝ Primed MDF 5
M&M# Crown BDL8057 9/16˝ x 3-1/16˝ Primed MDF 5
M&M# Crown BDL8058 9/16˝ x 3-5/16˝ Primed MDF 5
CrownsCrowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
M&M# Baseboard BDL8262 11/16˝ x 6-1/2˝ Primed MDF 58263 9/16˝ x 6-1/2˝ Primed MDF 3
-
Moulding Selection Guide
19 20
Moulding Selection Guide
M&M# Crown BDL8882 5/8˝ x 4-1/2˝ Primed MDF 5
M&M# Crown BDL47 5/8˝ x 4-1/4˝ Primed MDF 8
M&M# Crown BDL712 3/4˝ x 4-1/2˝ Primed MDF 4
CrownsCrowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
CrownsCrowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
M&M# Crown BDL60 11/16˝ x 5-1/2˝ Primed MDF 5
M&M# Crown BDL8512 11/16˝ x 5-3/8˝ Primed MDF 5
-
Moulding Selection Guide
21 22
Moulding Selection Guide
M&M# Crown BDL41 1-3/16˝ x 6-5/16˝ Primed MDF 2
M&M# Crown BDL43 1˝ x 6-15/16˝ Primed MDF 5
CrownsCrowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
M&M# Chair Rail BDL8160 1-1/4˝ x 3-3/16˝ Primed MDF 5
M&M# Chair Rail BDL8390 5/8˝ x 2-1/2˝ Primed MDF 5
M&M# Chair Rail BDL8300 9/16˝ x 1-3/4˝ Primed MDF 5
Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of chairs as well as adding a distinctive accent to any room.ALL SIZES NOMINAL
Chair Rails
The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs.ALL SIZES NOMINAL
Door Stops
M&M# Door Stop BDL8303 3/8˝ x 1-5/8˝ Primed MDF 5
M&M# Door Stop BDL8662B 3/8˝ x 1-3/8˝ Primed MDF 5
M&M# Door Stop BDL86642 7/16˝ x 1-1/4˝ Primed MDF LIFT
-
Moulding Selection Guide
23 24
Moulding Selection Guide
M&M# Architrave BDL5020 1-3/16˝ x 5-1/4˝ Primed MDF 1
M&M# Architrave BDL5000 1-1/8˝ x 3-3/4˝ - 16´ Primed MDF 4
M&M# Bed Mould BDL521 11/16˝ x 2-1/2˝ Primed MDF 5
ArchitravesIn classical architecture, an architrave described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors.ALL SIZES NOMINAL
Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
Bed Moulds
M&M# Wainscot BDL850 1-1/8˝ x 1-3/4˝ Primed MDF 4
M&M# Wainscot BDL222 7/16˝ x 5-3/4˝ Primed MDF 4
ALL SIZES NOMINAL
Miscellaneous Profiles
-
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
French Doors
Knotty Pine Cherry Maple
Fir Clear Pine Oak
Primed MDF Knotty Alder Poplar
Hemlock Raw FJ Pine Embossed15 Glass10 Glass
5 Glass
12 Glass
1 Glass 8 Glass 9 Glass4 Glass
Species Selection
All doors available in 80˝. Please call for custom sizes.
Moulded Panel Doors
2 Panel Smooth 2 Panel Arch Top Smooth & Textured
2 Panel Roman Smooth 3 Panel Textured
4 Panel Smooth & Textured
6 PanelSmooth & Textured
All doors available in 80˝. Please call for custom sizes.
1 Panel Shaker 5 Panel Shaker
-
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Glenview SmoothSaddlebrook 5 Panel Riverside Smooth
All doors available in 80˝. Please call for custom sizes.
Palazzo Series
Bellagio Capri
Cheyenne Smooth
Presenting the new Palazzo™ Series Collection...transforming interiors with
exceptional definition and elegance.
• Distinct raised moulding combined with unique, high-definition panel profiles.
• Exceptionally smooth surface, ideal for painting and decorating.
• Provides the weight, feel and richness of stile and rail wood doors by using Masonite’s unique Engineered Component Construction.
• Three architectural designs available as 80˝, 84˝ and 96˝ height; 1-3/8˝ or 1-3/4˝ thickness.
All doors available in 80˝. Please call for custom sizes.
Anniversary Collection
6 Panel Pine
4 Panel Pine
4 Panel Knotty Pine 6 Panel Knotty Pine
Wood Panel Doors
Treviso
2 Panel Chalkboard1 Panel Chalkboard
6 Panel Oak
-
Raw & PRIMED FJ PINEMOULDINGS• economicalwoodmouldingoption
• Smoothattractivefinishwhenpainted
• easilyworkedwithpowerandhandtools
• excellentforamultitudeofapplications
Raw & PRIMED FJ PINEMoULDINGS
PRIM
ED F
J PI
NE
Ra
w F
J PI
NE
• All Moulded Panel and Anniversary Collection designs are available with Safe ’N Sound® and Safe ’N Sound® Emerald Solid-Core construction
• Replicates the weight of a pine stile and rail wood door by utilizing Masonite’s patented DorCor™
• Provides better sound-deadening properties versus conventional,� flush,� hollow core doors
• Solid core yields greater dimensional stability
• Safe ’N Sound® Emerald has all the green attributes of the Safe ’N Sound® with additional features of No Added Urea-Formaldehyde and is FSC (Forest Stewardship Council) certified.
QuietSafe ‘N Sound™ doors significantly reduce sound transmission versus a standard hollow-core flush door. Sound deadening capabilities allow Safe ‘N Sound™ doors to shut out sounds from the other rooms throughout your home.
QualityGet the extra weight and hefty feel of a solid wood door. This variable density wood fibre core gives Masonite Moulded Panel Doors added dimensional stability and provides complete support for multiple panel designs.
Safety Testing has proved that a Safe ‘N Sound™door is more fire resistant than a typical flush or moulded wood fibre hollow-core door. The Safe ‘N Sound™ burn test lasted significantly longer than a hollow-core door.
SATISFY THE NEED FOR BEAUTY, NOISE REDUCTION, AND THE HEFT AND FEEL OF A SOLID WOOD DOOR Safe ’N Sound
-
Moulding Selection Guide
31 32
Moulding Selection Guide
M&M# Casing BDL2900CB 1˝ x 3˝ FJ Pine 6
M&M# Casing BDL2710 5/8˝ x 2-1/2˝ Primed FJ 12
M&M# Casing BDL2900 5/8˝ x 2-3/4˝ FJ Pine 122900 5/8˝ x 2-3/4˝ Primed FJ 12
M&M# Casing BDL2715 11/16˝ x 3-1/8˝ FJ Pine 12
M&M# Casing BDL474 11/16˝ x 3-1/8˝ x 7´ Primed FJ 10
CasingsCasings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
ALL SIZES NOMINAL
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Baseboards
M&M# Baseboard BDL2622 5/16˝ x 3-1/8˝ FJ Pine 12
M&M# Baseboard BDL2130 5/16˝ x 3-1/8˝ FJ Pine 122130 5/16˝ x 3-1/8˝ Primed FJ 12
M&M# Baseboard BDL2151 7/16˝ x 2-1/8˝ FJ Pine 16
M&M# Baseboard BDL2607 5/16˝ x 2-15/16˝ FJ Pine 122607 5/16˝ x 2-15/16˝ Primed FJ 12
M&M# Casing BDL2621 3/8˝ x 2-1/16˝ Primed FJ 20
-
Moulding Selection Guide
33 34
Moulding Selection Guide
M&M# Baseboard BDL2916 3/8˝ x 4˝ FJ Pine 82916 3/8˝ x 4˝ Primed FJ 8
M&M# Baseboard BDL2911 1/2˝ x 4-1/16˝ FJ Pine 8
M&M# Baseboard BDL2518 3/8˝ x 5-1/2˝ FJ Pine 8
M&M# Crown BDL2180 9/16˝ x 4-1/2˝ Primed FJ 6
CrownsCrowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
M&M# Bed Mould BDL2173 3/8˝ x 1-5/8˝ FJ Pine 20
M&M# Bed Mould BDL2174 3/8˝ x 2-1/8˝ Primed FJ 16
Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
Bed Moulds
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Baseboards
-
Moulding Selection Guide
35 36
Moulding Selection Guide
M&M# Chair Rail BDL2690 1˝ x 2-3/8˝ Primed FJ 6
M&M# Chair Rail BDL2689 11/16˝ x 1-3/4˝ FJ Pine 20
M&M# Backband BDL2990BK1 11/16˝ x 1-7/16˝ FJ Pine 12
M&M# Backband BDL2990BK 3/4˝ x 1-1/4˝ Primed FJ 12
M&M# Shingle Mould BDL2188 9/16˝ x 1-1/8˝ FJ Pine 402188 9/16˝ x 1-1/8˝ Primed FJ 402189 9/16˝ x 1-7/16˝ FJ Pine 20
M&M# Door Stop BDL2070 5/16˝ x 1˝ FJ Pine 402070 5/16˝ x 1˝ Primed FJ 40
M&M# Door Stop BDL2273 7/16˝ x 1-3/16˝ FJ Pine 302273 7/16˝ x 1-3/16˝ Primed FJ 30
M&M# Door Stop BDL2691 3/8˝ x 7/8˝ FJ Pine 50
M&M# Door Stop BDL2662 5/16˝ x 1˝ FJ Pine 402662 5/16˝ x 1˝ Primed FJ 40
Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of chairs as well as adding a distinctive accent to any room.ALL SIZES NOMINAL
Chair Rails
Backbands are most commonly used in combination with casings, and are used to elevate and enhance the look of the casing while adding a dramatic impact.ALL SIZES NOMINAL
Backbands
ALL SIZES NOMINAL
Shingles
The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs.ALL SIZES NOMINAL
Door Stops
-
Moulding Selection Guide
37 38
Moulding Selection Guide
Panel Moulds are used to frame wall paneling and add an accent to your walls. Often used in furniture construction.ALL SIZES NOMINAL
M&M# Panel Mould BDL466 11/16˝ x 1-1/2˝ Primed FJ 25
M&M# Panel Mould BDL434D 7/32˝ x 1/2˝ Primed FJ 40
M&M# Panel Mould BDL430D 5/16˝ x 1-11/16˝ Primed FJ 30
M&M# Panel Mould BDL2695 5/16˝ x 3/4˝ FJ Pine 752696 1/2˝ x 1-1/8˝ FJ Pine 30
M&M# Half Round BDL421D 5/16˝ x 5/8˝ Primed FJ 30
M&M# Quarter Round BDL2133 5/8˝ x 5/8˝ FJ Pine 402133 5/8˝ x 5/8˝ Primed FJ 40
M&M# Quarter Round BDL2100 7/16˝ x 7/16˝ FJ Pine 752100 7/16˝ x 7/16˝ Primed FJ 752103 15/16˝ x 15/16˝ FJ Pine 102102 11/16˝ x 11/16˝ Primed FJ 40
M&M# Base Shoe BDL2101 3/8˝ x 11/16˝ FJ Pine 402101 3/8˝ x 11/16˝ Primed FJ 40
Quarter Rounds come in several sizes and serve a variety of functions. They are most often used with baseboards. A cross section of a Half Round looks like a half circle and is used primarily as decorative trim. It works well as a trim piece for wall paper or to add a decorative pattern to flat panels. This profile can also be used to put a rounded edge on various shelving.
Base Shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the base. This versatile profile works great to solve numerous trimming needs.ALL SIZES NOMINAL
M&M# Cove BDL2105 1/2˝ x 1/2˝ FJ Pine 752105 1/2˝ x 1/2˝ Primed FJ 752106 11/16˝ x 11/16˝ Primed FJ 40455 15/16˝ x 15/16˝ Primed FJ 25
M&M# Handrail BDL2196 1-3/16˝ x 2-1/8˝ FJ Pine 62196 1-3/16˝ x 2-1/8˝ Primed FJ 6
Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications.
ALL SIZES NOMINAL
CovesHandrails provide safety and support.ALL SIZES NOMINAL
Handrails
Quarter Rounds, Half Rounds & Base ShoesPanel Moulds
-
MahoGaNyMoULDINGS
Ma
ho
Ga
Ny
MahoGaNy MoULDINGS• Consistant,BeautifulGrain
• WarmColourthatisenhancedwithaLightStain
• AttractiveinBothtraditionalandContempoaryDecor
39
Moulding Selection Guide
Also called window sill, a Window Stool is the surface installed below the sash of a window. Trim installed under window stool creates a distinctive look and adds a decorative touch.ALL SIZES NOMINAL
M&M# Window Stool BDL469 1-1/8˝ x 1-5/8˝ Primed FJ 1
M&M# Brickmould BDL2535 1-1/4˝ x 2˝ FJ Pine 6
M&M# Brickmould BDL558 1-1/8˝ x 1-5/8˝ Primed FJ 1
M&M# Lattice BDL2410 1/4˝ x 1-1/16˝ FJ Pine 202410 1/4˝ x 1-1/16˝ Primed FJ 20446 5/16˝ x 11/16˝ Primed FJ 40
M&M# Batten BDL2166 1/4˝ x 1-3/16˝ FJ Pine 502166 1/4˝ x 1-3/16˝ Primed FJ 502167 1/4˝ x 1-11/16˝ FJ Pine 202167 1/4˝ x 1-11/16˝ Primed FJ 20
M&M# Corner BDL2170 11/16˝ x 11/16˝ Primed FJ 402171 15/16˝ x 15/16˝ FJ Pine 302171 15/16˝ x 15/16˝ Primed FJ 30
Window Stool
A Lattice is a thin strip of flat moulding commonly used to hide seams and trim edges. It is available in a multitude of widths and is useful for a wide variety of projects.ALL SIZES NOMINAL
Lattice
Battens are narrow strips of wood used to cover joints or as decorative vertical members over plywood or wide boards.ALL SIZES NOMINAL
Battens
A Brickmould is used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2
and 1-1/4 inch sizes are available.ALL SIZES NOMINAL
Brickmoulds
Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a
wide variety of sizes and detailing.ALL SIZES NOMINAL
Corners
-
Moulding Selection Guide
41 42
Moulding Selection Guide
M&M# Baseboard BDL1218 9/16˝ x 2-3/16˝ Mahogany 20
M&M# Baseboard BDL1210 5/16˝ x 3-1/8˝ Mahogany 10
M&M# Baseboard BDL1212 3/8˝ x 3˝ Mahogany 10
M&M# Baseboard BDL1215 7/16˝ x 4-1/8˝ Mahogany 10
Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.ALL SIZES NOMINAL
Casings
Baseboards
M&M# Door Stop BDL1223 3/8˝ x 1-1/4˝ Mahogany 30
M&M# Door Stop BDL1221 5/16˝ x 1˝ Mahogany 30
M&M# Bed Mould BDL1246 7/16˝ x 1-9/16˝ Mahogany 20
The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs.ALL SIZES NOMINAL
Door StopsCrowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns
soften the transition from wall to ceiling while adding a distinctive look and charm to your room.
ALL SIZES NOMINAL
Bed Moulds
Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications.
ALL SIZES NOMINAL
Coves
M&M# Cove BDL1241 7/16˝ x 7/16˝ Mahogany 301242 11/16˝ x 11/16˝ Mahogany 30
ALL SIZES NOMINAL
Shingles
M&M# Shingle Mould BDL1251 7/16˝ x 1-1/8˝ Mahogany 301252 9/16˝ x 1-1/2˝ Mahogany 20
M&M# Casing BDL1201 3/8˝ x 2-1/8˝ Mahogany 20
M&M# Casing BDL1205 7/16˝ x 2-1/4˝ Mahogany 20
M&M# Base Shoe BDL1234 3/8˝ x 3/4˝ Mahogany 30
M&M# Half Round BDL1261 5/16˝ x 11/16˝ Mahogany 40
M&M# Quarter Round BDL1231 7/16˝ x 7/16˝ Mahogany 30
Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.ALL SIZES NOMINAL
Quarter Rounds, Half Rounds & Base Shoes
M&M# Casing BDL1207 11/16˝ x 2-1/2˝ Mahogany 121209 9/16˝ x 2-3/4˝ Mahogany 12
-
S4S & aCCESSoRIES• Perfectfor“CraftsmanStyleDecor”
• Smoothattractivefinishwhenpainted
• Plinthblocks,RosettesandCorners
• excellentforamultitudeofapplications
S4S & aCCESSoRIES
S4S
& a
CC
ESSo
RIE
S
43
Moulding Selection Guide
M&M# Handrail BDL1263 15/16˝ x 2-1/2˝ Mahogany 6
M&M# Batten BDL1225 5/16˝ x 1-1/8˝ Mahogany 301226 5/16˝ x 1-1/2˝ Mahogany 20
M&M# Corner BDL1253 3/4˝ x 3/4˝ Mahogany 301254 15/16˝ x 15/16˝ Mahogany 30
M&M# Screen Mould BDL1262 1/4˝ x 3/4˝ Mahogany 30
A very versatile profile; Screen Moulds fit a wide variety of needs and uses. Traditionally
used to hold mesh screening into wood screens, it also works well as edge trim on
various shelving or wood trim for wall finishes.ALL SIZES NOMINAL
Screen Moulds
Handrails provide safety and support.
ALL SIZES NOMINAL
Handrails
Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a
wide variety of sizes and detailing.ALL SIZES NOMINAL
Corners
The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs.ALL SIZES NOMINAL
Door Stops
-
Moulding Selection Guide
45 46
Moulding Selection Guide
Finish Boards come in either S4S (Surfaced 4 Sides) or S3S (Surfaced 3 Sides) and are used for a multitude of purposes including shelving, window liner, bases, casing, etc.
Finish Lumber (S4S)
Accessories
• Primed MDF
M&M# Victorian Rosette BDLFFP300V 3˝ x 3˝ Primed MDF 5FFP314V 3-1/4˝ x 3-1/4˝ Primed MDF 5FFP334V 3-3/4˝ x 3-3/4˝ Primed MDF 5FFP438V 4-3/8˝ x 4-3/8˝ Primed MDF 5
M&M# Rosette BDLFFP238 2-3/8˝ x 2-3/8˝ Primed MDF 5
M&M# Rosette BDLFFP250 2-1/2˝ x 2-1/2˝ Primed MDF 5FFM250 2-1/2˝ x 2-1/2˝ Mahogany 5
M&M# Rosette BDLFFM275 2-3/4˝ x 2-3/4˝ Mahogany 5
M&M# Rosette BDLFFP300 3˝ x 3˝ Primed MDF 5FFM300 3˝ x 3˝ Mahogany 5
M&M# Rosette BDLFFP334 3-3/4˝ x 3-3/4˝ Primed MDF 5
M&M# Inside Corner Block BDLFFPBIC 7/8˝ x 7/8˝ x 9˝ Primed MDF 5
M&M# Victorian Plinth Block BDLFFPPLIN339 1-1/4˝ x 3-3/8˝x 8˝ Primed MDF 5FFPV 1˝ x 4-3/8˝ x 9˝ Primed MDF 5
M&M# Plinth Block BDLFFPLIN3 7/8˝ x 3˝ x 8˝ Primed MDF 5FFPLIN334 1˝ x 3-3/4˝ x 8˝ Primed MDF 5FFPLIN412 1˝ x 4-1/2˝ x 8˝ Primed MDF 5FFPLIN 7/8˝ x 3-5/8˝ x 9˝ Primed MDF 5
M&M# Inside Corner Block BDLFFPBICA 7/8 ̋x 7/8 ̋x 5-11/16˝ Primed MDF 5
M&M# Outside Corner Block BDLFFPBOC 1-1/4˝ x 1-1/4˝ x 9˝ Primed MDF 5
M&M# Inside Corner Block BDLFFPCRIC 1-1/16˝ x 4-1/4˝ x 8˝ Primed MDF 1
M&M# Backband BDLP081 3/4˝ x 1-3/8˝ Solid Pine 20
Solid Pine Backbands
LENGth SPECIES 1x2 1x3 1x4 1x5 1x6 1x8
8´ PRIMeDMDF x x x x x x
12´ PRIMeDMDF x x x x x x
-
CoMbINatIoNS
Co
Mb
INa
tIo
NS
Ceiling trim options pg 51
Mantel trim options pg 52
Door & window trim options pg 49
-
Moulding Selection Guide
49 50
Moulding Selection GuideCase & Base Combinations
Option 1
Casing#8063
Baseboard #8263
Option 2
Casing#411
Baseboard #412
Option 3
Casing#535
Baseboard #545
Option 4
Casing#324
Baseboard #326
Option 5
Casing#908
Baseboard #8262
Option 6
Option 7
Casing#8900
Baseboard #8910
Option 8
Casing#8031Baseboard #8234
Option 9
Option 10
Casing#8062BBaseboard #8262
Option 11 Option 12
Casing#3621
Baseboard #2622
Casing#1205
Baseboard #1212
Casing#1209
Baseboard #1215
Casing#1207
Baseboard #1212
Option 1
Architrave #5000
Option 2
S4S 1x6
Door Stop#2273
Option 3
Chair Rail#8160
S4S1x6
Panel Mould#8390
Option 6
Panel Mould#1252
Chair Rail#1260
Door Jamb#1271
Panel Mould#2189
Option 7
Casing#2900CB
Panel Mould#1252
Door Jamb#1271V
Option 4
S4S 1x3
Cove#2106
S4S1x6
Chair Rail#2689
Option 5
Panel Mould#2189
Casing#2900
S4S 1x6
Door & Window Trim Options
-
Moulding Selection Guide
51 52
Moulding Selection GuideCeiling Trim OptionsCeiling Trim Options
Option 1
Baseboard#8234
Crown#47
Option 2
Baseboard#8263
Crown#712
Option 3
Crown#8512
Baseboard #8234
Option 6
Crown#41
Baseboard #8915
Option 4
Crown#8512
Baseboard #8234
Option 5
Crown#47
Baseboard #8263
Option 7
Baseboard#545
Crown#60
Option 8
Crown#47
S4S 1x6
Panel Mould#2188
Option 9
Crown#47
Baseboard #8095
Option 1
S4S1x8
Architrave#5000
Option 2
Crown#47
Baseboard #545
Option 3
Architrave#5000
S4S1x8
Option 5
S4S1x8
Crown#41
Option 6
S4S1x8
Baseboard #8263
Crown#60
Crown#60
S4S1x8
Option 4
Crown#47
Baseboard #412
S4S 1x8
Crown#41
Crown#179
Baseboard #1215
Option 14 Option 15
Crown#179
Baseboard #1215
Option 16
Crown#8882
Baseboard #1212
Mantel Trim Options
-
Moulding Selection Guide
53
Wall Trim Options
Chair Rail#8160
Option 6
Panel Mould#2189
Option 5
Baseboard #8955
S4S1x3
Option 4
S4S1x3
Architrave#5000
Panel Mould#2188
Option 3
Chair Rail#8390
Baseboard #8857
Option 1
Architrave#5000
Option 2
Panel Mould#2188
Panel Mould#2188
Panel Mould#8300
S4S1x3
S4S1x3
Green InitiativesMOULDING & MILLWORK INC. AND OUR AFFILIATED BUSINESSES ARE
COMMITTED TO SUSTAINABLE BUSINESS PRACTICES.
We are proudly promoting the use of certified, low
emitting, and recycled wood products, including
our new SPERO™ moulding line.
In addition, we are setting up Sustainable Operating
Standards, which includes responsible manufacturing
processes, chain of custody certifications, recycling
programs, energy reduction programs, low carbon
emission vehicle fleets, and memberships to
regional and national “Green” councils.
Moulding & Millwork, through our manufacturing
facilities and affiliates, have the ability to provide
products that may contribute to LEED rating
points in the following areas:
• Materials & Resources, 4.1, 4.2, 5.1, 5.2, 7
• Indoor Environmental Quality, 4.4
www.mouldingandmillwork.com/spero
Contains no urea-formaldehyde
-
52 Saunders Road
Barrie, Ontario L4N 9A8
Telephone (705) 739-2200www.barrietrim.com PRIN
TE
D 1
2/10
Welcome to Barrie Trim and Mouldings. For the past 25 years our goal has been to provide customers with
exceptional service, high quality products and a satisfaction guarantee. We supply and install trim and doors, along
with prehung door units for builders, contractors and home owners. We manufacture our stairs in house and custom
install them along with our railings and spindles. With a large showroom room and experienced staff, we are always
willing to go the extra mile to help you pick out your material with ease. We provide free, on-site quotations and
consultations, to ensure the end result fits your needs and budget. And with the help of our experienced installer’s
right at your finger tips, we’ll help you build the dream home or cottage you have been waiting for.