mount kit reference book archive book mount kits€¦ · check all tractor information and all...

An Alamo Group Company© 2002 Alamo Group Inc.

TRIUMPHHYDRO-CLIPPER

Mount Kit PartsListing

ALAMO INDUSTRIAL1502 E. WalnutSeguin, Texas 78155830-372-3551

ARCHIVE BOOK

Mount KitsAssembly / Part Number Reference Book

2002 Edition

Archive BookPart No.

02979558

Mount Kit Reference Book

Note: Front Cover is Page 1 & 2

© 2002 Alamo Group Inc. Parts Section -3

INTRODUCTION

HYDRO CLIPPER SICKLE BARMOUNT KIT

ARCHIVE BOOK

Sub- Frame Kit Section

1. Kit Number, This is the Kit used to mount Mower heads to Tractor. It includes Hardware (Hardware NOT listed in this Section) and main Components as listed to Right of KitNumber.

2. These Sub-frame Kits are listed as a reference ONLY and are no longer used in production asthis model has been discontinued.

3. DO NOT ORDER Sub-Frame Kits as Parts as they may contain more Parts than you want,For Parts & Hardware components that are in kit but is not listed here contact AlamoIndustrial Customer Service Dept.

Hydraulic Kit Section

1. Kit Number, This is the Kit used to mount Hydraulic to the Tractor for Mower head operation.It includes Hardware (Hardware NOT listed in this Section) and main Components as listedBelow Kit Number.

2. These Hydraulic Kits are listed as a reference ONLY and are no longer used in production as this model has been discontinued.

3. DO NOT ORDER Hydraulic Kits as Parts as they may contain more Parts than you want,For Parts & Hardware components that are in kit but is not listed here contact Alamo IndustrialCustomer Service Dept. (Nuts, Bolts, Fitting, Hose Adapters & other components in Kit areNOT Listed in this Listing.)

4. There have been some changes in the components of these kits, Mainly the Pumps have been replaced with a different type Pump, Check all NOTES that are liste dwith these Hydraulic Kits.

5. Also listed w/ Hyd Kits is a Completeing Kit Listed, This was used to complete the HydraulicKit and Head could not be completed without it. Check Tractor Models to see if a CompletingKit

Tractor Model / Tractor Components Listing

1. This Section List the Different Models of Tractors and how they were Equipped, FindTractor Model, Match to components, Options, Tire Size, and Options or anyother information lested for Tractors. This information MUST be Known befor ordering anyParts.

2. Check all Tractor information and all information listed in Tractor Model Section, Match to allOptions in Sub-Frame or Hydraulic Kit sections.

3. Thes Tractors were mounted with, 2500, 3500, 8500 & other Cutters, See Parts Archive Book fot other Cutter Heads, Single or Dual Heads Mounted.


INDEX - Hydro ClipperMount Kit Reference No.

TRACTOR BRAND / MODEL PAGE NO.

ALLIS CHALMERS MODELS5040, 5050........................................................................................... 106140 2WD & 4 WD.............................................................. 10714B, 710C Loader / Back Hoe....................................................... 10I-400, I-600, 615 w/ Loader.................................................................... 11D14 w/ Henry L 600 Loader.................................................. 11

BOMBADIER MODELSBM 50 .................................................................................. 12

CASE - IH MODELS140 .................................................................................. 13200, 300, 400 S/N 8191147 & Below.................................................. 132400 .................................................................................. 142400A, 2400B .................................................................................. 152400, 2400B w/ 2050 or 3050 Loader................................................ 142424, 2444 Standard & Lo-Boy Models........................................... 142500 .................................................................................. 142500A, 2500B .................................................................................. 152500, 2500B w/ 2050 or 3050 loader................................................. 142544 .................................................................................. 233230 2 WD Rops, Cab......................................................... 15380B GP, 380B IND............................................................................... 17380CK GP, 380LL................................................................................. 16380CK LCG .................................................................................. 16380LL w/ Davis Loader............................................................ 16385,395,485,495 w/ Front Aux Mounted Pump......................................... 17385,395,485,495 w/ Internal Tractor Hyd.................................................. 17424 Standard & Lo-Boy Models........................................... 18430,440 S/N 8191146 & Below.................................................. 18430,440,470 S/N 8191147 & UP...................................................... 19430CK S/N 8210946 & Up....................................................... 20430CK w/ 23 Loader............................................................... 19430LCK .................................................................................. 20454,464 .................................................................................. 21480,480B .................................................................................. 20480B w/ 26 Loader............................................................... 19480B CK w/Loader..................................................................... 22480CK,480D CK,480LL w/Loader, Modular Hitch or Back Hoe................... 20484 .................................................................................. 21500,530,540 S/N 8191146 & Below.................................................. 18530,540,550 S/N 8191147 & Up....................................................... 19530CK w/ 32 Loader............................................................... 22530LCK .................................................................................. 20530CK,580CK S/N 8210946 & Up....................................................... 20544 .................................................................................. 23574 .................................................................................. 21580,580B .................................................................................. 20530B w/ 32 or 34 Loader...................................................... 22580CK w/Loader, Modular Hitch or Back Hoe............................ 20580B CK w/Loader..................................................................... 22Continued Next Page




CASE - IH MODELS (Continued From Previous Page)580CK w/Loader, Modular Hitch or Back Hoe............................ 20584 .................................................................................. 21585,595 w/ Internal Tractor Hyd................................................. 23585,595 w/ Aux front Mounted Pump.......................................... 24685,695 w/ Internal Tractor Hyd................................................. 23685,695 w/ Aux front Mounted Pump.......................................... 24685 w/ Factory Mounted Cab.............................................. 24885,895 w/ Internal Tractor Hyd................................................. 231190 GP, 1194 .................................................................................. 251290 GP, 1294 .................................................................................. 25

DAVID BROWN MODELS770,780,885 Diesel, 3800 Gas Engine.............................................. 26880 Diesel, 4600 Gas Engine.............................................. 261284,1285 w/ Freeman Loader...................................................... 27990, 995 Standard & Orchard Models.......................................... 27

DEUTZ ALLIS MODELS6240,6250,6260 Aux. PTO Mounted Pump, 2 WD & 4 WD...................... 286240,6250,6260 Aux. Front Mounted Pump, 2 WD & 4 WD..................... 28

FORD - NH MODELS1900, 1910 2 WD & 4 WD............................................................. 292000 .................................................................................. 302100,2600 .................................................................................. 312110 LCG .................................................................................. 332120 4 WD......................................................................... 33230A LCG w/ Aux Front Pump...................................................... 34230A LCG w/ Internal Tractor Hydraulics........................................ 342310,2610 2 WD & 4 WD............................................................. 312311 LCG .................................................................................. 33250C,260C .................................................................................. 36260 w/ Loader.................................................................... 322810 2 WD & 4 WD............................................................. 322910 LCG w/ Aux Front Pump...................................................... 342910 LCG w/ Aux Front Pump & Factory Installed Cab................... 352910 LCG w/ Internal Tractor Hydraulics........................................ 343000,3100 .................................................................................. 363230,3430 .................................................................................. 36335,340 .................................................................................. 36340A,340B .................................................................................. 363430 .................................................................................. 34340 .................................................................................. 363430 .................................................................................. 363600 .................................................................................. 363610 w/ Aux Front Mounted Pump.......................................... 373610 w/ Internal Tractor Hydraulics........................................ 373910 w/ Aux Front Mounted Pump.......................................... 37




FORD - NH MODELS3910 w/ Aux Front Mounted Pum & Factory Mounted Cab....... 383910 w/ Internal Tractor Hydraulics........................................ 373930 w/ Aux Front Mounted Pump.......................................... 363930 w/ Internal Tractor Hydraulics........................................ 373930 w/ Rear PTO Mounted Pump........................................ 384000 w/ Aux Front Mounted Pum(Prior to 1965)...................... 394000SU,4100SU w/ Aux Front Mounted Pump.......................................... 394110 LCG .................................................................................. 33445 .................................................................................. 364600SU w/ Aux Front Mounted Pump........................................ 394610 w/ Rops & Aux, Front Mounted Pump............................. 414610 w/ Factory Cab & Aux, Front Mounted Pump................. 424610SU w/ Rops & Aux Front Mounted Pump............................. 404610SU w/ Rops & Internal Tractor Hydraulics............................ 404610SU w/ Factory Cab & Aux Front Mounted Pump.................. 414630 w/ Rops & Aux, Front Mounted Pump............................. 414630 w/ Factory Cab & Aux, Front Mounted Pump................. 424910 LCG w/ Aux Front Pump...................................................... 344910 LCG w/ Internal Tractor Hydraulics........................................ 345030 w/ Cab & Front Mounted Pump..................................... 425100 w/ Aux Front Mounted Pump......................................... 43530 LCG .................................................................................. 34530A LCG w/ Aux Front Pump...................................................... 34530A LCG w/ Internal Tractor Hydraulics........................................ 34531 LCG .................................................................................. 33540A,545 .................................................................................. 365600 w/ Aux Front Mounted Pump......................................... 435610 w/ Internal Tractor Hydraulics........................................ 445610 w/ Aux Front Mounted Pump.......................................... 445635 w/ Aux Front Mounted Pump......................................... 43600 w/ Aux Front Mounted Pump.......................................... 456600 w/ Aux Front Mounted Pump......................................... 436610 w/ Internal Tractor Hydraulics........................................ 446610 w/ Aux Front Mounted Pump........................................ 446640 w/ Cab & Aux Front Mounted Pump, 2 WD.................... 45745 w/ Loader ( 2500 lbs to 2800 lbs)................................... 46745 w/ Loader ( 3300 lbs to 4500 lbs)................................... 467600 w/ Aux Front Mounted Pump......................................... 437610 w/ Internal Tractor Hydraulics........................................ 447610 w/ Aux Front Mounted Pump.......................................... 44800 w/ Aux Front Mopunted Pump........................................ 47

HESSTON MODELS466,466DT .................................................................................. 48566,566DT .................................................................................. 48

HOLDER MODELS500 .................................................................................. 48




JACOBSEN MODELSG-20 .................................................................................. 49

JOHN DEERE MODELS950 2 WD S/N 10859 & Below ............................................ 50950 2 WD S/N 10860 & Up................................................. 50970 2 WD & 4 WD, Rear PTO Mounted Pump...................... 51970 2 WD, Mid-Mounted PTO Mounted Pump...................... 511020 Rear PTO Mounted Pump............................................. 521050 2 WD Only, Rear PTO Mounted Pump............................ 521070 2 WD & 4 WD, Rear PTO Mounted Pump....................... 531250 2 WD & 4 WD, Internal Tractor Hyd, Utility or Turf............ 531250 2 WD & 4 WD, Rear PTO Mounted Pump, Utility or Turf... 542020 Rear PTO Mounted Pump.............................................. 542040 S/N 266750 & Up , Utility & Turf.................................... 552150,2155,2240 Utility & Turf, 2 WD...................................................... 552150 4 WD w/ Loader........................................................... 552350,2355 2 WD & 4 WD w/ Tractor Hydraulics.............................. 562350,2355 2 WD & 4 WD w/ Aux Front Pump................................ 562350,2355 2 WD & 4 WD w/ Rear PTO Mounted Pump................... 572440 Utility & Turf, w/ Rear PTO Mounted Pump.................... 572550,2555 2 WD & 4 WD w/ Tractor Hydraulics.............................. 562550,2555 2 WD & 4 WD w/ Aux front Pump................................. 562550,2555 2 WD & 4 WD w/ Rear PTO Mounted Pump................... 572640 Utility & Turf, w/ Rear PTO Mounted Pump.................... 572640A (2648) Utility & Turf, w/ Rear PTO Mounted Pump.................... 582750,2755 w/ Internal Tractor Hydraulics........................................ 58300 w/ Utility & Turf, w/ Internal Tractor Hydraulics................ 59300,300B w/ Loader, Loader / Tractor Hydraulics........................... 59301 w/ 7310 Loader, w/ Loader / Tractor Hydraulics............... 60301,301A w/ Utility & Turf, w/ Internal Tractor Hydraulics................ 59301,301A w/ Utility Loader, w/ Loader / Tractor Hydraulics............. 60302 w/ Utility & Turf, w/ Internal Tractor Hydraulics................ 59302 w/ Utility Loader, w/ Internal Tractor Hydraulics............... 60302A w/ Loader, w/ Loader / Tractor Hydraulics....................... 59400 w/ Loader, w/ Loader Hydraulics (12/70 & Down)............ 59400 w/ Loader, w/ Loader Hydraulics (01/71 & Up)................ 61401 w/ 7310 Loader, w/ Loader Hydraulics............................ 62401,401B w/ Utility Loader, w/ Loader Hydraulics............................ 62401,401B,401D w/ Utility & Turf, w/ Rear PTO Mounted Pump................ 61401A,401C,401D w/ Loader, w/ Loader Hydraulics (401A =12/70 & Down).. 59401A w/ Loader, w/ Loader Hydraulics (01/71 & Up)................ 61410 w/ Loader, w/ Internal Tractor Hydraulics........................ 635200,5300,5400 2 WD & 4 WD, w/ Loader, w/ Internal Tractor Hydraulics.. 63

KABOTA MODELSL2850 2 WD & 4 WD............................................................. 65L3350 4 WD......................................................................... 65L345,L345DT .................................................................................. 64L3750 2 WD & 4 WD............................................................. 66




KABOTA MODELS (Continued From Previuos Page)L4150 2 WD & 4 WD............................................................. 66L5450 .................................................................................. 66M4030SU .................................................................................. 67M4050,M4050DT .................................................................................. 64M7500,M4500DT .................................................................................. 64

MASSEY FERGUSON MODELS100 Loader on 32/34 Model w/ Loader / Tractor Hyd......................... 73135 Red w/ Front Mounted aux Pump......................................... 74165 w/ Front Mounted Aux Pump........................................ 6820 w/ Front Mounted Aux Pump........................................ 6820C w/ Front Mounted Aux Pump........................................ 68200 Loader on 32/34 Model w/ Loader / Tractor Hyd......................... 73230 STD w/ Front Mounted Aux Pump........................................ 69230 STD w/ Rear PTO Mounted Aux Pump.................................. 69240 w/ Front Mounted Aux Pump........................................ 69240 w/ Rear PTO Mounted Aux Pump.................................. 69245 STD w/ Front Mounted Aux Pump........................................ 69245 ORC w/ Front Mounted Aux Pump........................................ 70245 STD w/ Rear PTO Mounted Aux Pump.................................. 69250 w/ Front Mounted Aux Pump........................................ 69250 w/ Rear PTO Mounted Aux Pump.................................. 69253 Utility & Lo-Profile, w/ Front Mounted Aux Pump............ 70253 Utility & Lo-Profile, w/ Rear PTO Mounted Aux Pump...... 71255 w/ Front Mounted Aux Pump........................................ 71265 w/ Front Mounted Aux Pump........................................ 71270 w/ Front Mounted Aux Pump........................................ 72275 w/ Front Mounted Aux Pump........................................ 71283 w/ Front Mounted Aux Pump........................................ 72290 w/ Front Mounted Aux Pump........................................ 7230 w/ Front Mounted Aux Pump........................................ 7230B w/ Front Mounted Aux Pump........................................ 7331 w/ Front Mounted Aux Pump........................................ 723165 w/ Front Mounted Aux Pump........................................ 7232 100 / 200 Loaders w/ Loader / Tractor Hyd..................... 7332A w/Loaders w/ Cessna Valve w/ Loader / Tractor Hyd....... 7434 100 / 200 Loaders w/ Loader / Tractor Hyd..................... 7334A w/Loaders w/ Cessna Valve w/ Loader / Tractor Hyd....... 7435 Red w/ Front Mounted aux Pump......................................... 74375 Twin w/ Front Mounted aux Pump......................................... 75383 w/ Front Mounted aux Pump......................................... 75390 w/ Front Mounted aux Pump......................................... 7540 w/ Front Mounted aux Pump......................................... 7640B w/ Front Mounted aux Pump......................................... 7650E w/ Front Mounted aux Pump......................................... 77

SUB-FRAME KITSSub-Frame Kit Component Part Numbers............................................. 78-79-80-81



HYDRAULIC KITSKit No. Page No.

02974981..................... 8402974983..................... 8402974984..................... 8502975250..................... 85KIT1418....................... 85-86KIT2193....................... 86KIT2380....................... 86-87KIT2835....................... 87KIT2864....................... 87-88KIT2872....................... 88KIT3021....................... 88KIT3245....................... 89KIT3337....................... 89KIT3620....................... 89KIT4084....................... 90KIT4159....................... 90KIT4246....................... 90-91KIT4291....................... 91KIT4326....................... 91KIT4408....................... 91KIT4589....................... 92KIT4797....................... 92KIT4858....................... 93KIT4990....................... 93KIT5423....................... 93KIT5458....................... 94KIT5464....................... 94KIT5609....................... 94KIT5661....................... 95KIT5677....................... 95KIT5682....................... 95KIT5724....................... 96KIT5812....................... 96KIT5817....................... 96KIT5833....................... 97KIT5886....................... 97KIT5891....................... 97-98KIT5893....................... 98KIT5943....................... 98KIT6109....................... 99KIT6131....................... 99KIT6154....................... 100KIT6165....................... 100KIT6170....................... 100KIT6180....................... 101KIT6214....................... 101KIT6304....................... 101-102KIT6398....................... 102

HYDRAULIC KITSKit No. Page No.

KIT6402....................... 102-103KIT6407....................... 103KIT6434....................... 103KIT6459....................... 103-104KIT6463....................... 104KIT6496....................... 104KIT6511....................... 105KIT6526....................... 105KIT6538....................... 105KIT6542....................... 106KIT6580....................... 106KIT6589....................... 106-107KIT6598....................... 107KIT6607....................... 108KIT6608....................... 108KIT6610....................... 108KIT6620....................... 109KIT6636....................... 109KIT6690....................... 109KIT6693....................... 110KIT6726....................... 110KIT6732....................... 111KIT6742....................... 111KIT6751....................... 112KIT6802....................... 112KIT6809....................... 112-113KIT6831....................... 113KIT6847....................... 114KIT6867....................... 114KIT6870....................... 114KIT6875....................... 115KIT6906....................... 115KIT6913....................... 115-116KIT6944....................... 116KIT6972....................... 116KIT7004....................... 116-117KIT7034....................... 117KIT7052....................... 117KIT7061....................... 118KIT7092....................... 118KIT7117....................... 118KIT7134....................... 119KIT7226....................... 119KIT7237....................... 120KIT7442....................... 120KIT7514....................... 121KIT7521....................... 121

Triumph Sickle Bar (Archive Book) 10/02© 2002 Alamo Group Inc. Parts Section -10

MOUNT KITSALLIS CHALMERS

ALLIS CHALMERS - 5040, 5050Tires: Rear : 14.9 - 29 Max tire Size

Front: 6.00 - 16 Max Tire SizePump: Front Mounted Aux. PumpMounting: 42" Mounting = 17" Trunnion HeightSpecial: 1. Tractor Must be equipped w/ Long rear Mounted Pump Kit # 755987

2. For Front Mounted Long Pump Kit # 779939 Use TMC Hyd Kit # KIT63143. NO 8500 Models for this Tractor Application, 2500 Model Only.

2500 Mod. (File Mod. Ref. # 2513 DEF)Item Part No. Part No. Qty Description

New # Old #1. KIT5981 5981 1 Sub-Frame Kit2. KIT5682 5682 1 Hydraulic Kit

ALLIS CHALMERS - 6140, (2 WD & 4 WD)Tires: Rear : 14.9 - 28 Max tire Size

Front: 7.50 - 16 Max Tire SizePump: Front Mounted Aux. PumpMounting: ___" Mounting = ___" Trunnion Height (No Listings)Special: None

2500 Mod. (File Mod. Ref. # 2571 GHI)Item Part No. Part No. Qty Description


ALLIS CHALMERS - 714B, 710C Loader / Back HoeTires: Rear : 18.4 - 24 Max tire Size

Front: 11L - 16 Max Tire SizePump: Use Loader / Tractor Hydraulic SystemMounting: ___" Mounting = ___" Trunnion Height (No Listing)Special: 1. Loader / Back Hoe Dealer must furnish AC Valve kit # 1096330

2. Battery Box must be moved, Use TMC Kit # 0640800 (Extra Charge Item)3. Dealer must provide 60" Long Positive Battery Cable for Battery relocation.4. No Listing for 8500 fot this tractor Application.



© 2002 Alamo Group Inc. Parts Section -11Triumph Sickle Bar (Archive Book) 10/02

MOUNT KITSALLIS CHALMERS

ALLIS CHALMERS - I-400, I-600, 615 w/ LoaderTires: Rear : No Listing

Front: No ListingPump: Use Loader / Tractor Hydraulic SystemMounting: ___" Mounting = ___" Trunnion Height (No Listing)Special: 1. Dealer must Supply Power Beyond Sleeve AC # 2017714

2. NO 8500 Models for this Tractor Application, 2500 Model Only.


New # Old #1. KIT4105 4105 1 Sub-Frame Kit2. --N/A-- --N/A-- 1 Hydraulic Kit

ALLIS CHALMERS - D-14 w/ Henry L600 LoaderTires: Rear : No Listing

Front: No ListingPump: Use Loader / Tractor Hydraulic SystemMounting: ___" Mounting = ___" Trunnion Height (No Listing)Special: None

2500 Mod. (File Mod. Ref. # 2515 ABC)Item Part No. Part No. Qty Description



MOUNT KITS

BOMBARDIER - BM50Tires: Rear : No Listing

Front: No ListingPump: Internal Tractor HydraulicsMounting: ____" Mounting = ____" Trunnion Height (No Listings)Special: 1. Tractor must be equipped with Front Lift Arms

2. Valve for mower Operation is supplied by Bombardier Co.

2500 Mod. (File Mod. Ref. # 2548 ABC)8500 Mod. (File Mod. Ref. # 8548 ABC)

Item Part No. Part No. Qty DescriptionNew # Old #

1. KIT7109 7109 1 Sub-Frame Kit2. None None 1 Hydraulic Kit (Supplied by Bombardier)

BOMBARDIER


MOUNT KITS

CASE-IH - 140Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Mounted Aux PumpMounting: ____" Mounting = _____" Trunnion Height (No Listings)Special:

2500 Mod. (File Mod. Ref. # 2542 ABC)8500 Mod. (File Mod. Ref. # 8542 ABC)Item Part No. Part No. Qty Description


CASE-IH - 2424, 2444Standard & Lo-Boy Models

Tires: Rear : 13.6- 28 Max Tire SizeFront: 7.50 - 16 Max Tire Size

Pump: Front Mounted Aux PumpMounting: 47-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Minimum Front Tread Setting required f/ this mounting.

1. No 8500 models mounted on this Tractor, they will not fit.



CASE - IH

CASE-IH - 200, 300, 400S/N 8191147 & Below

Tires: Rear : No Tire ListingsFront: No Tire Listings

Pump: Front Mounted Aux PumpMounting: ___" Mounting = ____" Trunnion Height (Not Listed)Special: 1. For Models w/ Case-O-Matic transmision See File Mod. Ref # 2557 ABC


2500 Mod. (File Mod. Ref. # 2550 ABC)


1. KIT2690 2690 1 Sub-Frame Kit2. KIT2864 2864 1 Hydraulic Kit


MOUNT KITSCASE - IH

CASE-IH - 2400Tires: Rear : NO Listings

Front: NO ListingsPump: Internal Tractor Hydraulics usedMounting: 39" Mounting = ____" Trunnion Height (Not Listed)Special: 1. For Use w/ 12.5 GPM or 15 GPM Internal tractor Pumps.

2. When Tractor is equipped w/ IH # 3224 ( Single Aux. Hyd. Valve & RearManifold), TMC Parts # 0475900 (Valve Cover), # 002400 (Elbow) &# 0022500 (Elbow) are required to be used.

3. Foot rest must be modified so Cutter will Clear it.4. NO 8500 Models mounted for this Application. 2500 Only

2500 Mod. (File Mod. Ref. # 2570 GHI)



CASE-IH - 2400, 2400B, 2500, 2500B w/ 2050 or 3050 Loader

Tires: Rear : NO ListingsFront: NO Listings

Pump: Internal Tractor Hydraulics usedMounting: 50" Mounting = ____" Trunnion Height (Not Listed)Special: 1. For Use w/ 12.5 GPM or 15 GPM Internal tractor Pumps.

2. When Tractor is equipped w/ IH # 3224 ( Single Aux. Hyd. Valve & RearManifold), TMC Parts # 0475900 (Valve Cover), # 002400 (Elbow) &# 0022500 (Elbow) are required to be used.

3. Mower CAN NOT be mounted w/ Back Hoe or Back Hoe Frame.4. NO 8500 Models mounted for this Application. 2500 Only





MOUNT KITS

CASE - 3230, 2 WD CAB & ROPSTires: No Tire Listings

No Tire ListingsPump: Front Mounted Aux PumpMounting: 38" Mounting = 18-1/2" Trunnion HeightSpecial: 1. Cab Model With A/C

2. Row Crop Axles

2500 Mod. (File Mod. Ref. # N/A)8500 Mod. (File Mod. Ref. # N/A)


1. ---N/A--- --N/A-- 1 Sub-Frame Kit (Contact Factory For Kit)2. KIT7514 7514 1 Hydraulic Kit (for ROPS Tractor)

KIT7521 7521 1 Hydraulic Kit (for Cab Tractor)

CASE-IH - 2400A, 2400B, 2500A, 2500BTires: Rear : 14.9 - 28

Front: 7.50 - 16 Max Tire Size,Except Model 454 & 464 Max Tire is 6.00 - 16Pump: Internal Tractor Hydraulics usedMounting: ____" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Tractor must be equipped w/ Optional 15.4 GPM Pump Conversion &

Draft Control.2. When Tractor is equipped w/ IH # 3224 ( Single Aux. Hyd. Valve & Rear

Manifold), TMC Parts # 0475900 (Valve Cover), # 002400 (Elbow) &# 0022500 (Elbow) are required to be used.

3. When Tractor is Equipped w/ 4 Bolt Mounting Aux. valve(s) PowerBeyond Kit # KIT6135 is required.

4. 484 Model Tractor Must be Equipped w/ Straight Front Axle.

2500 Mod. (File Mod. Ref. # 2570 OPQ)8500 Mod. (File Mod. Ref. # 8570 OPQ)



CASE - IH


MOUNT KITSCASE - IH

CASE - 380CK LCG (w Aux Mounted Pump)Tires: Rear : 18.4- 16.1 Max Tire Size

Front: 7.50 - 16 Max Tire SizePump: Front Mounted Aux PumpMounting: ___" Mounting = ___" Trunnion Height (No Listings)Special: 1. No 8500 Model f/ this tractor Application, 2500 Model Only




CASE - 380LL w/ Davis Loader (Loader / Tractor Hydraulics)

Tires: Rear : 13.6- 12/28 = Max Tire SizeFront: 7.50 - 16 = Max Tire Size

Pump: Front End Loader Hydraulic System UsedMounting: 44-1/2" MountingSpecial: 1. Maximum Tire Sizes & No 8500 Mounted 2500 Only

2500 Mod. (File Mod. Ref. # 2555 DEF)



CASE - 380CK GP, 380LL (w Aux Mounted Pump)Tires: Rear : 13.6- 12/28 Max Tire Size

Front: 7.50 - 16 Max Tire SizePump: Front Mounted Aux PumpMounting: 38" Mounting = 18-1/2" Trunnion HeightSpecial:2500 Mod. (File Mod. Ref. # 2555 ABC)8500 Mod. (File Mod. Ref. # 8555 ABC)




MOUNT KITS

CASE - 385, 485, 380B GP, 380B IND, 395, 495Tires: Rear : 14.9 X 24 Min. Tire Size & 14.9 X 28 Max Tire Size

Front: 9.00 X 10 Min. Tire Size & 7.50 X 16 Max Tire SizePump: Internal Tractor Hydraulics UsedMounting: 40" Mounting = 17-1/4" Trunnion HeightSpecial: 1. Tractor beginning w/ Serial Number 18,000 & Up.

2. Tractor must be equipped w/ Case-IH Optional 18 GPM conversion, Aux.Control Valve(s) & w/ or w/o Draft Control.

3. Tractors must be equipped w/ Utility Straight Front Axle. Except 380BIndustrial Model

4. 385 Mechanical Front Wheel Drive will accept Tire Sizes.Front: 8.3 X 24R3 Rear: 14.9 X 28

2500 Mod. (File Mod. Ref. # 2526 DEF)8500 Mod. (File Mod. Ref. # 8526 DEF)



CASE - IH

CASE - 385, 395, 485, 495 (w/ Aux Mounted Pump)Tires: Rear : 14.9 - 28 Max Tire Size

Front: 7.50 - 16 Max Tire SizePump: Front Mounted Aux PumpMounting:Special: 1. Tractor must be equipped w/ Case - IH Hollow Axle Pivot Pin.

2. Step must be removed to clead Cutter.3. Tractors must be equipped w/ Utility Straight Front Axle.4. 385 Mechanical Front Wheel Drive will accept Tire Sizes.

Front: 8.3 X 24R3 Rear: 14.9 X 285. The 385 & 395 use different Hydraulic Kits than 485 & 495

2500 Mod. (File Mod. Ref. # 2556 ABC) w/ Aux Pump8500 Mod. (File Mod. Ref. # 8556 ABC)


1. KIT6653 6653 1 Sub-Frame Kit (02974987)2. KIT6620 6620 1 Hydraulic Kit (02974988) w/ 485 & 495

KIT6847 6847 1 Hydraulic Kit (02975250) w/ 385 & 395


MOUNT KITS

CASE-IH - 424Standard & Lo-Boy Models

Tires: Rear : 13.6- 28 Max Tire SizeFront: 7.50 - 16 Max Tire Size

Pump: Front Mounted Aux PumpMounting: 47-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Minimum Front Tread Setting required f/ this mounting.




CASE - IH

CASE-IH - 430, 440, 500, 530, 540S/N 8191146 & Below


Pump: Front Mounted Aux PumpMounting: ___" Mounting = ____" Trunnion Height (Not Listed)Special: 1. For Models w/ Case-O-Matic transmision See File Mod. Ref # 2557 ABC






MOUNT KITS

CASE - 430, 440, 470, 530, 540, 550 (S/N 8191147 & Up)Tires: Rear : 14.9 X 24 Max Tire Size

Rear: 12.4 X 24 Max Tire SizePump: Front Mounted Aux PumpMounting: 38" Mounting = 18" Trunion Height w/ 14.9 X 24 Tire Size

38" Mounting = 16-3/8" Trunnion Height w/12.4 X 24 Tire SizeSpecial: 1. Can be mounted on tractors with or without Torque Amplifier.

2. No 8500 Models mounted 2500 Mod Only.




CASE - 3230, 2 WD, ROPS & CAB (Dual Wings)Tires: Rear : No Tire Listings

Rear: No Tire ListingsPump: Front Mounted Aux PumpMounting: ___" Mounting = ___" Trunion Height (Not Listed)Special: 1. Dual Wing Cutters LH & RH

2. Row Crop Front Axle3. Cab with A/C

2500 Mod. (File Mod. Ref. # N/A)Item Part No. Part No. Qty Description

New # Old #1. ---N/A--- ------ 1 Sub-Frame Kit2. KIT7514 7514 1 Hydraulic Kit (ROPS Tractor)

KIT7521 7521 1 Hydraulic Kit (Cab Tractor)

CASE - IH


MOUNT KITSCASE - IH

CASE - 430CK, 530CK, 580CK (S/N 8210946 & Up)480, 480B, 580 & 580B

Tires: Rear : 14.9 X 24 Max Tire SizeRear: 12.4 X 24 Max Tire Size

Pump: Front Mounted Aux PumpMounting: 38" Mounting = 18" Trunion Height w/ 14.9 X 24 Tire Size

38" Mounting = 16-3/8" Trunnion Height w/12.4 X 24 Tire SizeSpecial: 1. No 8500 Models mounted 2500 Only.



CASE - 430LCK, 530LCKTires: Rear : No Tire Listing

Rear: No Tire ListingPump: Front Mounted Aux PumpMounting: ___" Mounting = ___" Trunion Height (No Listing)Special: 1. No 8500 Models mounted 2500 Only.



CASE - 430CK w/ 23 Loader,480B w/ 26 Loader

Tires: Rear : No Tire ListingsRear: No Tire Listings

Pump: Loader / Tractor Hydraulics usedMounting: ___" Mounting = ___" Trunion Height (Not Listed)Special: 1. If Tractor equipped w/ Modular Hitch Sub Hyd Kit # KIT5666 ILO # KIT3245.

2. Dealer to Supply Case # D48085 Sleeve, # D48086 Gasket, #D53169 Ring& Case High Pressure Carryover Fitting.

3. WILL NOT Mount to Tractors with G148B Engines2. No 8500 Models mounted 2500 Mod Only.


New # Old #1. KIT2863 2863 1 Sub-Frame Kit2. KIT3245 3245 1 Hydraulic Kit (w/o Modular Hitch Tractor)

KIT5666 5666 1 Hydraulic Kit (w/ Modular Hitch Tractor)


MOUNT KITS

CASE - 480CK, 480D CK, 580CK, 480LL Front EndLoader, Models w/ Modular Hitch or Backhoe

Tires: Rear : 14.9 X 24 Max Tire SizeRear: 12.4 X 24 Max Tire Size

Pump: Front End Loader Hyd. System usedMounting: 46" Mounting = 18" Trunnion Height w/ 14.9 X 24 Tire Size

46" Mounting = 16-3/8" Trunion Height w/12.4 X 24 Tire SizeSpecial: 1. Can be mount w/ Cab, But will require clearence hole f/ Hoses to be

cut in Loader Valve mounting Deck

2500 Mod. (File Mod. Ref. # 2556 RST)8500 Mod. (File Mod. Ref. # 8556 RST)



CASE - IH

CASE-IH - 454, 464, 484, 574, 584, HYDRO 84Tires: Rear : 14.9 - 28

Front: 7.50 - 16 Max Tire Size,Except Model 454 & 464 Max Tire is 6.00 - 16Pump: Internal Tractor Hydraulics usedMounting: ____" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Tractor must be equipped w/ Optional 15.4 GPM Pump Conversion &

Draft Control.2. When Tractor is equipped w/ IH # 3224 ( Single Aux. Hyd. Valve & Rear

Manifold), TMC Parts # 0475900 (Valve Cover), # 002400 (Elbow) &# 0022500 (Elbow) are required to be used.

3. When Tractor is Equipped w/ 4 Bolt Mounting Aux. valve(s) PowerBeyond Kit # KIT6135 is required.

4. 484 Model Tractor Must be Equipped w/ Straight Front Axle.





MOUNT KITS

CASE - 480B CK, 580B CK w/ Front End LoaderTires: Rear : No Listings

Front: No ListingsPump: Loader / Tractor Hydraulics System UsedMounting: ___" Mounting = ___" Trunnion Height (No Listings)Special: 1. This is for Tractors made after 1973 w/ ROPS Loader Frame.

2. Dealer may have to supply Special Hyd Fitting from Case.3. 480B CK w/ Back Hoe or Modular Hitch use Hyd Kit # KIT5668 ILO KIT56614. 580B CK w/ Back Hoe or Modular Hitch use Hyd Kit # KIT5662 ILO KIT56615. No 8500 Models mounted 2500 Only.

2500 Mod. (File Mod. Ref. # 2556 OPQ)



CASE - IH

CASE - 530CK, 580CK w/ 32 Front End Loader580B w/ 32 or 34 Front End Loader

Tires: Rear : 14.9 - 24 = 18" Trunion HeightFront: 12.4 - 24 = 16-3/8" Trunion Height

Pump: Front End Loader Hydraulics System UsedMounting: = 18" Trunion Height w/ 14.9 X 24 Tire Size

= 16-3/8" Trunnion Height w/12.4 X 24 Tire SizeSpecial: 1. Parker VD922 Valve on this model. use with Tractor with Modular Hitch

2. No 8500 Models mounted 2500 Only.



1. KIT2863 2863 1 Sub-Frame Kit2. KIT3337 3337 1 Hydraulic Kit (w/o Modular Hitch Tractor)

KIT5464 5464 1 Hydraulic Kit (w/ Modular Hitch Tractor)


MOUNT KITSCASE - IH

CASE-IH - 544, 2544Tires: Rear : 14.9 - 28 Max Tire Size

Front: 7.50 - 16 Max Tire SizePump: Internal Tractor Hydraulics usedMounting: 43" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Tractor must have Single or Double Remote Valve w/ Internal 17 GPM

Pump2. NO 8500 Models mounted this application 2500 Model Only.



CASE - 585, 595, 685, 695, 885, 895 (Tractor Hydraulics)Tires: Rear : 16.9 X 28 Min Tire Size & 16.9 X 34 Max Tire Size

Front: 7.50 X 16 Min Tire Size & 10.00 X 16 Max Tire SizePump: Internal Tractor Hydraulic System UsedMounting: 40" Mounting = 17-1/4" Trunnion HeightSpecial: 1. Tractors starting with Serial Number 18,000 & Up.

2. Tractors must be equpped w/ Utility Straight Front Axle.3. Tractor must be equipped w/ Case-IH Optional 18 GPM conversion, Aux.

Control Valve(s) & w/ or w/o Draft Control.

2500 Mod. (File Mod. Ref. # 2526 GHI)8500 Mod. (File Mod. Ref. # 8526 GHI)




MOUNT KITS

CASE - 685 (w/ Factory Mounted Cab Only)Tires: Rear : 16.9 X 30 Max Tire Size

Front: 9.5 X 24 Max Tire SizePump: Aux Front Mounted PumpMounting: 49" MountingSpecial: 1. 2 Wheel Drive or 4 Wheel Drive Models

2. Cab / Rops Specification: For 85 Series AG Tractor3. Tractor must be equipped w/ Case-IH Optional 18 GPM conversion, Aux.

Control Valve(s) & w/ or w/o Draft Control.4. Rear RH Wheel & Fuel Tank must be removed f/ this mounting, Refer to

Kits f/ additional modifications required.




CASE - IH

CASE - 585, 595, 685, 695 (Aux Pump Hydraulics)Tires: Rear : 16.9 X 28 Min Tire Size & 16.9 X 34 Max Tire Size

Front: 7.50 X 16 Min Tire Size & 10.00 X 16 Max Tire SizePump: Aux Front Mounted PumpMounting: 40" Mounting = 17" Trunnion HeightSpecial: 1. Starting with Tractor Serial Number 18,000 & Up.

2. Tractor must be equipped w/ Utility Straight Front Axle.3. Tractor must be equipped w/ Case-IH Hollow Axle Pivot Pin.4. Tractor must be equipped w/ Case-IH Optional 18 GPM conversion, Aux.

Control Valve(s) & w/ or w/o Draft Control.



1. KIT6651 6651 1 Sub-Frame Kit (02975996)2. KIT6690 6690 1 Hydraulic Kit (02975997)


MOUNT KITS

CASE - 1290GP, 1294Tires: Rear : 16.9 - 30 Max Tire Size

Front: 7.50 - 16 Max Tire SizePump: Front Mounted Aux PumpMounting: 45-3/4" Mounting = 18" Trunnion HeightSpecial: 1. Tractor Must be equipped w/ Pulley w/ Front Drive Fitting Case # 944348

2. Suitable f/ 2500 & 8500 Mower Mounting w/ following Tread restrictionsbased on Max. Tire Size Listed w/ 90 deg. Break-A-WayFront 64" Max. & Rear 72" Max w/ 2500 Mod.Front 80" Max & Rear 56" Max w/ 8500 Mod.

3. Two Post Rops Model Tractors Only.




CASE - IH

CASE - 1190GP, 1194Tires: Rear : 14.9 - 28 Max Tire Size

Front: 7.50 - 16 Max Tire SizePump: Front Mounted Aux PumpMounting: 45-3/4" Mounting = 18" Trunnion HeightSpecial: 1. Suitable f/ 2500 & 8500 Mower Mounting w/ following Tread restrictions

based on Max. Tire Size Listed w/ 90 deg. Break-A-Way2. Front 56" Max. & Rear 76" Max w/ 2500 Mod.

Front 72" Max & Rear 56" Max w/ 8500 Mod.3. Two Post Rops Model Tractors Only Only.4. 1194 Must raise Battery Tray up 2 inches.





MOUNT KITS

DAVID BROWN -880 Diesel, 4600 Gas

Tires: Rear : 13.6 - 28 Max Tire SizeFront: 6.00 - 16 Max Tire Size

Pump: Front Mounted Aux. PumpMounting: ___" Mounting = ___" Trunnion Height (No Listings)Special: 1. Dealer must relocate Battery & Foot Throttle must be removed.

2. NO 8500 Models for this tractor Application, 2500 Models Only.



1. KIT4532 4532 1 * Sub-Frame Kit (Obsolete)2. KIT4533 4533 1 * Hydraulic Kit (Obsolete)

* NOTE: These Kits are No Longer Available, Listed above as reference Only. Forparts for this Tractor mounting contact Factory for availability of any parts.

DAVID BROWN

DAVID BROWN -770, 780, 885 Diesel, 3800 Gas(Front Mounted Aux. Pump)

Tires: Rear : 12.4 - 28 Max tire SizeFront: 5.50 - 16 Max Tire Size

Pump: Front Mounted Aux. PumpMounting: ___" Mounting = ___" Trunnion Height (No Listing)Special: 1. Dealer must relocate Battery.

2. NO 8500 Models for this tractor Application, 2500 Models Only.





MOUNT KITS

DAVID BROWN -1284, 1285 w/ Freeman Loader


Pump: Tractor Loader HydraulicsMounting: ___" Mounting = ___" Trunnion Height (No Listings)Special: 1. NO 8500 Models for this tractor Application, 2500 Models Only.



1. KIT4530 4530 1 * Sub-Frame Kit (Obsolete)2. KIT4531 4531 1 * Hydraulic Kit (Obsolete)

* NOTE: These Kits are No Longer Available, Listed above as reference Only. Forparts for this Tractor mounting contact Factory for availability of any parts.

DAVID BROWN

DAVID BROWN -990, 995 (Standard & Orchard Model)


Pump: Tractor Loader HydraulicsMounting: ___" Mounting = ___" Trunnion Height (No Listings)Special: 1. Dealer must relocate Battery.

2. Dealer may need to supply Case # 971801 Front Drive Fitting.2. NO 8500 Models for this tractor Application, 2500 Models Only.





MOUNT KITS

DEUTZ ALLIS - 6240, 6250, 6260 (2 Wd & 4 WD)(Rear PTO Mounted Aux. Pump

Tires: Rear : 16.9 - 30 Max tire SizeFront: 7.50 - 16 (2500 f/ 2 WD) or 10.00 - 16 (2500 f/ 4 WD) Max Tire Size

10.00 - 16 (8500 f/ 2 WD) or 11.2 - 24 (8500 f/ 4 WD) Max Tire SizePump: Rear PTO Mounted Aux. PumpMounting: 40-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Max Tread Settings: Rear w/ 16.9 - 30 Tires = 68", Front tire Selection

& Mower type will Limit Tread Settings, Contact Factory.2. Front Wheel Fender on 4 WD can not be used w/ Mower3. 4 WD Drive Train Guard must be trimmed to clear mower frame.




DEUTZ ALLIS

DEUTZ ALLIS - 6240, 6250, 6260 (2 Wd & 4 WD)(Front Mounted Aux. Pump

Tires: Rear : 16.9 - 30 Max tire SizeFront: 7.50 - 16 (2500 f/ 2 WD) or 10.00 - 16 (2500 f/ 4 WD) Max Tire Size

10.00 - 16 (8500 f/ 2 WD) or 11.2 - 24 (8500 f/ 4 WD) Max Tire SizePump: Front Mounted Aux. PumpMounting: 40-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Max Tread Settings: Rear w/ 16.9 - 30 Tires = 68", Front tire Selection

& Mower type will Limit Tread Settings, Contact Factory.2. Front Wheel Fender on 4 WD can not be used w/ Mower3. 4 WD Drive Train Guard must be trimmed to clear mower frame.





MOUNT KITSFORD - NH

FORD - 1900 (2 WD or 4 WD)Tires: Rear : 12.4 X 24 Max Tire Size

Front: 5.00 - 15 (2WD) & 6.00 - 16 (4 WD) Max Tire SizePump: Front Aux. Mounted PumpMounting: 42" Mounting = 17" Trunnion HeightSpecial: 1. Tractor should have liquid in LH rear Tire and/or Wheel Weight.

2. Only 8500 Model available for this application & NO 7 ft Models

8500 Mod. (File Mod. Ref. # 8584 DE*)



* No 7 ft Cutterbars used on these Applications, 5 ft. & 6 ft ONLY.

FORD - 1910 (2 WD or 4 WD)Tires: Rear : 12.4 X 24 Max Tire Size

Front: 5.50 - 15 (2WD) & 6.00 - 16 (4 WD) Max Tire SizePump: Front Aux. Mounted PumpMounting: 44-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Tractor should have liquid in LH rear Tire and/or Wheel Weight.

2. Only 8500 Model available for this application & NO 7 ft Models

8500 Mod. (File Mod. Ref. # 8584 GH*)



* No 7 ft Cutterbars used on these Applications, 5 ft. & 6 ft ONLY.


MOUNT KITS

FORD - 2000 (Prior to 1964)Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Dealer must Furnish Ford Jackshaft # 195454

2. Tractor have 4 - Cyl. Gas or Diesel Engines3. NO 8500 Models Mounted



FORD - NH

FORD - 2000(1964 up model w/ 3 Cyl, Gas or Diesel Engine)


Pump: Front Aux. Mounted PumpMounting: 39-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Must use Completing Kit Listed Below, it contains Jackshaft.



1. KIT5682 5682 1 Sub-Frame Kit (02978063) (2500 Model)KIT5978 5978 1 Sub-Frame Kit (8500 Model)

2. KIT4246 4246 1 Hydraulic Kit (02974984)3. KIT4291 4291 1 Completing Kit (use w/ Hyd Kit)


MOUNT KITSFORD - NH

FORD - 2100, 2600Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 39-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Max. Front Tread Setting, 52" Swept Back Axle

2. Max Rear Tread Setting, 56"3. Must use Completing Kit Listed Below, it contains Jackshaft.





FORD - 2310, 2610 (2WD or 4WD)Tires: Rear : 14.9 - 28 (2500 Model) or 14.9 - 30 (8500 Model)

Front: 7.50 - 16Pump: Front Aux. Mounted PumpMounting: 40-1/2" Mounting = ___" Trunnion Height (Trunnion Height Not Listed)Special: 1. Relocate Light f/ after Dark Driving when needed, Dealer to Provide Lights.

Ford # 310068 & Ford Adapter # EONN13A097AA f/ Side Hood Mounting.2. 4 WD Tractors Sub Hyd Kit # KIT4246 & Completing Kit # KIT42913. Must use Completing Kit Listed Below, it contains Jackshaft.






MOUNT KITS

FORD - 260 (w/ Loader)Tires: Rear : 16.9 - 24R1

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: _____ Mounting = _____" Trunnion Height (No Listings)Special: 1. Tractor Loader hs two lever Loader Valve.

2. Loaders 730 = 2500 lbs, 735 = 3500 llbs. Note; 744 Loader is the same as a730 Loader with a different Bucket.



FORD - NH

FORD - 2810 (2WD or 4WD)Tires: Rear : 14.9 - 28 (2500 Model) or 14.9 - 30 (8500 Model)

Front: 7.50 - 16Pump: Front Aux. Mounted PumpMounting: 40-1/2" Mounting = ___" Trunnion Height (Trunnion Height Not Listed)Special: 1. Relocate Light f/ after Dark Driving when needed, Dealer to Provide Lights.







MOUNT KITSFORD - NH

FORD - 2110 LCG, 4110 LCG, 2311 LCG, 531 LCGTires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 42-1/2" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Max. Front Tread Setting, 56"

2. Must use Completing Kit Listed Below, it contains Jackshaft.3. NO 8500 Models Mounted


New # Old #1. KIT3394 3394 1 Sub-Frame Kit2. KIT6744 6744 1 Hydraulic Kit3. KIT4291 4291 1 Completing Kit (use w/ Hyd Kit)

FORD - 2120 (4 WD)(Front Mounted Aux. Pump)

Tires: Rear : 18.4 - 26 (Turf) Max Tire SizeFront: 27 X 8.5 - 15 (Turf) Max Tire Size

Pump: Front Aux. Mounted PumpMounting: 40-1/2" Mounting = 17" Trunnion HeightSpecial: 1. For RH and/or LH Mowers Use Numbers Listed Below.

2. Not offered w/ 7 ft Cutter Bar, 5 ft & 6 ft. models only.

2500 Mod. (File Mod. Ref. # 2578 OP*)8500 Mod. (File Mod. Ref. # 8578 OP*)


1. KIT6968 6968 1 Sub-Frame Kit, RH MowerKIT7175 7175 1 Sub-Frame Kit, LH Mower

2. KIT6972 6972 1 Hydraulic Kit, RH MowerKIT7177 7177 1 Hydraulic Kit, LH Mower


MOUNT KITS

FORD - 230A LCG, 530A LCG, 2910 LCG, 4910 LCG(Front Mounted Aux. Pump)

Tires: Rear : 18.4 - 16 (2500) & 8.3 - 24 Dual Rear (8500) Max Tire SizeFront: 8.0 - 16 (2500) & 7.0 - 16 (8500)

Pump: Front Aux. Mounted PumpMounting: 40-1/2" (2500) & 49-1/2" (8500) Mounting = ____" Trunnion Height (Not Listed)Special: 1. Max Tread Settings Rear: 68" (2500) & 80" (8500)

Front: 80" (2500) & 80" (8500)



1. KIT6473 6473 1 Sub-Frame Kit2. KIT4246 4246 1 Hydraulic Kit (02974984)3. KIT4291 4291 1 Completing Kit (use w/ Hyd Kit)

FORD - NH

FORD - 230A LCG, 530A LCG, 2910 LCG, 4910 LCG(Internal Tractor Hydraulics)

Tires: Rear : 18.4 - 16 (2500) & 8.3 - 24 Dual Rear (8500) Max Tire SizeFront: 8.0 - 16 (2500) & 7.0 - 16 (8500)

Pump: Internal Tractor Hydraulis UsedMounting: 40-1/2" (2500) & 49-1/2" (8500) Mounting = ____" Trunnion Height (Not Listed)Special: 1. Max Tread Settings Rear: 68" (2500) & 80" (8500)

Front: 80" (2500) & 80" (8500)2. This Model Operates f/ the Ford Closed center Hyd. System w/ Aux Pump &

Deluxe remote Control valve.2. For Closed Center Hyd. System w/ Aux Pump w/o Deluxe Remote Control

Use Hyd. Kit # KIT67783. See File Mod. Ref. # 2579 OPQ f/TMC Open Center System, Pump & Tank.

2500 Mod. (File Mod. Ref. # 2579R OPQ)8500 Mod. (File Mod. Ref. # 8579R OPQ)




MOUNT KITS

FORD - 2910, w/ Factory Mounted Cab(2 WD & 4 WD)

Tires: Rear : 14.9 - 30 Max Tire SizeFront: 7.50 - 16 (2 WD) or 9.5 - 24 (4 WD)

Pump: Front Aux. Mounted PumpMounting: 44" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. RH Step Must be removed to mount Cutter.

2. Relocate Lights for after Dark Operating wheen needed. Dealer toProvide Lights Ford # 310068 & Adapters Ford #EONN13A97AA f/SideHood Mounting as required.

3. For Cab Mounting w/ Front Pump Use Hydraulic Kit # KIT6898 &# KIT4290 Completing Kit.

4. Mounting Suitable for Ford Cab Models Mark SK82 Type SEK397 &Mark S90 Type SEK580.




FORD - NH

FORD - 3430Tires: Rear : 14.9 - 28 (2500) & 14.9 - 30 (8500) Max Tire Size

Front: 7.50 - 16Pump: Internal Tractor Hydraulic SystemMounting: 40-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. This Model Operates f/ the Ford Closed center Hyd. System w/ Aux Pump &



2500 Mod. (File Mod. Ref. # 2576R GHI)8500 Mod. (File Mod. Ref. # 8576R GHI)



2. KIT5817 5817 1 Hydraulic Kit


MOUNT KITS

FORD - 335, 340, 3100, 3000, 3400, 3600Tires: Rear : No Tire Listings







FORD - NH

FORD - 340A, 340B, 445, 540A, 545, 3930, 3430, 3230,250C, 260CTires: Rear : 14.9 - 28 (2500) & 14.9 - 30 (8500) Max Tire Size

Front: 7.50 - 16Pump: Front Aux. Mounted PumpMounting: 40-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Relocate Light f/ after Dark Driving when needed, Dealer to Provide Lights.

Ford # 310068 & Ford Adapter # EONN13A097AA f/ Side Hood Mounting.2. May be required to modifiy or removal of Step Plates.3. Must use Completing Kit Listed Below, it contains Jackshaft.4. 3930 Model Tractor f/ 4 WD sub Hyd KIT6711 f/ both KIT4246 & KIT4290






MOUNT KITS

FORD - 3610, 3910 (2WD or 4WD)(Front Mounted Aux. Pump)

Tires: Rear : 14.9 - 28 (2500 Model) or 14.9 - 30 (8500 Model)Front: 7.50 - 16

Pump: Front Aux. Mounted PumpMounting: 40-1/2" Mounting = ___" Trunnion Height (Trunnion Height Not Listed)Special: 1. Relocate Light f/ after Dark Driving when needed, Dealer to Provide Lights.






FORD - NH

FORD - 3610, 3910, 3930(Internal Tractor Hydraulics)

Tires: Rear : 14.9 - 28 (2500) & 14.9 - 30 (8500) Max Tire SizeFront: 7.50 - 16

Pump: Internal Tractor Hydraulic SystemMounting: 40-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. This Model Operates f/ the Ford Closed center Hyd. System w/ Aux Pump &








MOUNT KITS

FORD - 3910, w/ Factory Mounted Cab (2 WD & 4 WD)(Front Mounted Aux. Pump)









FORD - NH

FORD - 3930, (2 WD)(Rear PTO Mounted Pump)


Pump: Rear PTO Mounted Aux. PumpMounting: 40-1/2" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. This Model uses reae PTO mounted Pump. No other Equipment can be

operated on PTO unless Pump is removed.2. This Model has rear Mounted Tank & is equipped w/ Standard remote Control

valve. Tank will not clear deluxe removed control valve.

2500 Mod. (File Mod. Ref. # 2577 UVW)8500 Mod. (File Mod. Ref. # 8577 UVW)




MOUNT KITS

FORD - 4000SU, 4100SU, 4600SU, 540Tires: Rear : No Tire Listings







FORD - 4000 (Prior to 1965)Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Dealer must Furnish Ford Jackshaft # 195454

2. Tractor have 4 - Cyl. Gas or Diesel Engines3. NO 8500 Models Mounted




FORD - NH


MOUNT KITSFORD - NH

FORD - 4610SU (2WD or 4WD) w/ROPS(Front Mounted Aux. Pump)

Tires: Rear : 14.9 - 28 (2500 Model) or 14.9 - 30 (8500 Model)Front: 7.50 - 16

Pump: Front Aux. Mounted PumpMounting: 40-1/2" Mounting = ___" Trunnion Height (Trunnion Height Not Listed)Special: 1. Relocate Light f/ after Dark Driving when needed, Dealer to Provide Lights.






FORD - 4610SU w/ ROPS(Internal Tractor Hydraulic System)

Tires: Rear : 14.9 - 28 (2500) & 14.9 - 30 (8500) Max Tire SizeFront: 7.50 - 16

Pump: Internal Tractor Hydraulic SystemMounting: 40-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. This Model Operates f/ the Ford Closed center Hyd. System w/ Aux Pump &








MOUNT KITS

FORD - 4610, 4630 (2 WD & 4 WD) ROPSTires: Rear : 16.9 - 30 Max Tire Size

Front: 7.50 - 18 (2 WD) or 9.5 - 24 (4 WD 2500) 11.2 - 24 (4 WD 8500)Pump: Front Aux. Mounted PumpMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Must use Completing Kit Listed Below, it contains Jackshaft.

2. Relocate Lights for after Dark Operating wheen needed. Dealer to ProvideLights Ford # 310068 & Adapters Ford #EONN13A97AA f/Side HoodMounting as required.

3. For Cab Mounting w/ Front Pump Use Hydraulic Kit # KIT6898 & # KIT4290Complting Kit as listed below.



1. KIT6560 6560 1 Sub-Frame Kit (02977319)2. KIT4246 4246 1 Hydraulic Kit (02974983)3 KIT4290 4290 1 Completing Kit

FORD - 4610SU, w/ Factory Mounted Cab(2 WD & 4 WD)









FORD - NH


MOUNT KITSFORD - NH

FORD - 4610, 4630 w/ Factory Mounted Cab(2 WD & 4 WD)

Tires: Rear : 16.9 - 30 Max Tire SizeFront: 7.50 - 18 (2 WD) or 11.2 - 24 (4 WD 8500)

Pump: Front Aux. Mounted PumpMounting: 44" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Relocate Lights for after Dark Operating wheen needed. Dealer to Provide

Lights Ford # 310068 & Adapters Ford #EONN13A97AA f/Side HoodMounting as required.

3. For Cab Mounting w/ Front Pump Use Hydraulic Kit # KIT6898 & # KIT4290Completing Kit as listed below.



1. KIT6730 6730 1 Sub-Frame Kit2. KIT6732 6732 1 Hydraulic Kit3 KIT4290 4290 1 Completing Kit

FORD - 5030, 2WD w/ CabTires: Rear : 16.9 - 30 Max Tire Size

Front: 7.50 - 16 Max tire SizePump: Front Aux. Mounted PumpMounting: 45" Mounting = 17" Trunnion HeightSpecial: 1. RH Step must be removed fro clearence to run Cutter.

2. Cab modification is required.





MOUNT KITS

FORD - 5100, 5600, 6600, 7600Tires: Rear : 16.9 - 30 Max Tire Size

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Must use Completing Kit Listed Below, it contains Jackshaft.



1. KIT3632 3632 1 Sub-Frame Kit2. KIT4326 4326 1 Hydraulic Kit3. KIT4290 4290 1 Completing Kit (use w/ Hyd Kit)

FORD - NH

FORD - 5635Tires: Rear : 16.9 - 30 Max Tire Size

Front: 10 - 16 Max tire SizePump: Front Aux. Mounted PumpMounting: 47" Mounting = 17" Trunnion HeightSpecial:



1. KIT7441 7441 1 Sub-Frame Kit2. KIT7442 7442 1 Hydraulic Kit (02974981)


MOUNT KITS

FORD - 5610, 6610, 7610(Internal Tractor Hydraulics)


Pump: Internal Tractor Hydraulics UsedMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Operates f/ the Ford Closed center Hydraulics System w/ Aux. Pump &

Deluxe Remote Control Valves.2. See File Mod. Ref. # 2589 for TMC Open Center System Pump & Tank.3. For Closed Center Hyd. System w/ Aux. Pump w/o Deluxe remote Control

use Hyd Kit # KIT6778

2500 Mod. (File Mod. Ref. # 2589R DEF)8500 Mod. (File Mod. Ref. # 8589R DEF)



FORD - 5610, 6610, 7610(Aux. front Mounted Pump)

Tires: Rear : 16.9 - 30 Max Tire SizeFront: No Tire Listings

Pump: Front Aux. Mounted PumpMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. Must use Completing Kit Listed Below, it contains Jackshaft.



1. KIT3632 3632 1 Sub-Frame Kit2. KIT4326 4326 1 Hydraulic Kit3. KIT4290 4290 1 Completing Kit (use w/ Hyd Kit)

FORD - NH


MOUNT KITS

FORD - NHFORD - 600Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. No 8500 Models available for this application




FORD - 6640, 2WD w/ CabTires: Rear : 18.4 - 16 Approved Tire Size

Front: 7.50 - 16 Approved Tire SizePump: Front Aux. Mounted PumpMounting: 40" Mounting = 17" Trunnion HeightSpecial: 1. RH Step must be removed to make room for Cutter mounting.

2. Battery Box must be relocated.3. Cab Modifications will be required.





MOUNT KITS

FORD - 745 Loader (2500 lbs. to 2800 lbs.)Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 47" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. No 8500 Models available for this applicatio.

2. This Model has Single Lever Loader Valve3. CAN be operated with Back Hoe.




FORD - 745 Loader (3300 lbs. to 4500 lbs.)Tires: Rear : 16.9 - 24 R4

Front: 7.50 - 16 1LPump: Front Aux. Mounted PumpMounting: 49-1/4" Mounting = 17" Trunnion HeightSpecial: 1. This Model has Single Lever Loader Valve

2. CAN NOT be operated with Back Hoe.




FORD - NH


MOUNT KITS

FORD - 800Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Aux. Mounted PumpMounting: 38" Mounting = _____" Trunnion Height (No Listing f/ Trunnion Height)Special: 1. No 8500 Models available for this application




FORD - NH


MOUNT KITSHESSTON

HESSTON - 466, 466DT, 566, 566DTTires: Rear : 16.9 - 28 Max tire Size

Front: 9.5 - 24 Max Tire SizePump: Front Mounted Aux. PumpMounting: 43-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Tread Setiings; Max Rear = 72" (2500) & 60" (8500)

Max Front= 63" (2500) & No Restrictions (8500 f/ 2WD)




HOLDER

HOLDER - 500Tires: Rear : 31 x 15.5 X 15 Tires used, can also use 10.5 - 18 optional tires.

Front: 31 x 15.5 X 15 Tires used, can also use 10.5 - 18 optional tires.Pump: Rear PTO Mounted Aux. PumpMounting: ____" Mounting = ____" Trunnion Height (No Listings)Special: 1. RH Door must be removed for Valve Mounting Bracket.

2. Tractor must be equipped with PTO Extension Shaft & Bearing Kit.3 Mower Operates form TMC 540 RPM PTO Pump.4. If 8500 Model used Dealer should add Wheel Weights to LH Front Wheel




Special Note: This was a Proto Type Mounted in April 1985


MOUNT KITSJACOBSEN

JACOBSEN - G-20Tires: Rear : 14.9 - 24 or 21.5L X 16.1 Max tire Size

Front: No ListingPump: Front Mounted Aux. PumpMounting: 43-1/2" Mounting = ____" Trunnion Height (No Listings)Special: 2. Tractor must be equipped with Massey Ferguson Crankshaft Adapter Part

# 704-812-M93 with Fasteners.3 This will also fit MF 20C Turf.4. NO 8500 Model used for this Tractor Application 2500 Models Only





MOUNT KITS

JOHN DEERE - 950, 2 Whl Drv (S/N 10859 & Down)S/N Change in Kits in 1985

Tires: Rear : 12.4 X 28 Max tire SizeFront: 5.50 X 16 Max Tire Size

Pump: Use Internal Tractor Hydraulic SupplyMounting: 47-3/4" Mounting = 17-1/2" Trunnion HeightSpecial: 1. Max Front Wheel Tread 53"

2. Tractor should have Liquid in LH rear Tire & Wheel Weights3. This Mounting is Only f/ Tractors w/o Radiator Sealing Kits.

2500 Mod. (File Mod. Ref. # 2506 GHI) S/N 10859 & Down8500 Mod. (File Mod. Ref. # 8506 GHI) S/N 10859 & Down



JOHN DEERE - 950, 2 Whl Drv (S/N 10860 & Up)S/N Change in Kits in 1985

Tires: Rear : 12.4 X 28 Max Tire SizeFront: 5.50 X 16 Max Tire Size

Pump: Aux. Rear PTO Mounted PumpMounting: 42" Mounting = 17" Trunnion HeightSpecial: 1. Maximum Front Wheel Tread 53"

2. With Rear Mounted PTO Pump no other Equipment can be run off PTOunless Aux Rear Pump is removed.

3. Tractor should have Liquid in LH rear Tire & Wheel Weights

2500 Mod. (File Mod. Ref. # 2506 RST) S/N 10860 & Up8500 Mod. (File Mod. Ref. # 8506 RST) S/N 10860 & Up



JOHN DEERE


MOUNT KITS

JOHN DEERE - 970 (2 WD & 4 WD)Tires: Rear : 13.6 X 24 Min Tire Size & 13.6 X 28 Max Tire Size

Front: 5.50 X 16 Min Tire Size & 8-16 Max Tire SizePump: Rear PTO Mounted Aux PumpMounting: 43-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Tire Selection may Limit Tread Settings.

2. Use Rear Mounted PTO Pump, Other Equipment cannot be operated unlessPTO Pump is removed.

3. Tractor should have Liquid in LH rear Tire & Wheel Weights.4. 8500 Model Only available there were NO 2500 Models.5. There were NO 7 ft Cutter Bar used, Only 5 & 6 ft used.

8500 Mod. (File Mod. Ref. # 8506 UV*)Item Part No. Part No. Qty Description

New # Old #1. KIT6865 6865 1 Sub-Frame Kit2. KIT6867 6867 1 Hydraulic Kit (8500 Model Only)

* No 7 ft. Models available for this application.

JOHN DEERE

JOHN DEERE - 970 (2 WD )Tires: Rear : 13.6 X 24 Min Tire Size & 13.6 X 28 Max Tire Size

Front: 5.50 X 16 Min Tire Size & 8-16 Max Tire SizePump: Mid-Mounted PTO Mounted Aux PumpMounting: 43-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Tire Selection may Limit Tread Settings.

2. Tractor must be Equipped w/ Mid Mounted PTO.3. Tractor should have Liquid in LH rear Tire & Wheel Weights.4. RH Step Platform modification required.5. 8500 Model Only available there were NO 2500 Models.6. There were NO 7 ft Cutter Bar used, Only 5 & 6 ft used.

8500 Mod. (File Mod. Ref. # 8506 XY*)Item Part No. Part No. Qty Description


* No 7 ft. Models available for this application.


MOUNT KITSJOHN DEERE

JOHN DEERE - 1020Tires: Rear : 14.9 X 28 Max Tire Size

Front: 6.00 X 16 Max Tire SizePump: Aux. Rear PTO Mounted PumpMounting: 44" Mounting = 17" Trunnion HeightSpecial: 1. With Rear Mounted PTO Pump no other Equipment can be run off PTO

unless Aux Rear Pump is removed.



1. KIT6576 6576 1 Sub-Frame Kit (2500 Model Only)KIT6766 6766 1 Sub-Frame Kit (8500 Model Only)

2. KIT4084 4084 1 Hydraulic Kit (2500 or 8500 Model)

JOHN DEERE - 1050, 2 Wheel Drive OnlyS/N Change in Kit in 1985

Tires: Rear : 12.4 X 28 Max Tire SizeFront: 5.50 X 16 Max Tire Size

Pump: Aux. Rear PTO Mounted PumpMounting: 42" Mounting = 17" Trunnion HeightSpecial: 1. Maximum Front Wheel Tread 53"

2. With Rear Mounted PTO Pump no other Equipment can be run off PTOunless Aux Rear Pump is removed.

3. Tractor should have Liquid in LH rear Tire & Wheel Weights

2500 Mod. (File Mod. Ref. # 2506 OPQ) S/N 020000 & Down2500 Mod. (File Mod. Ref. # 2506 RST) S/N 020001 & Up8500 Mod. (File Mod. Ref. # 8506 OPQ) S/N 020000 & Down8500 Mod. (File Mod. Ref. # 8506 RST) S/N 020001 & Up


1. KIT6164 6164 1 Sub-Frame Kit2. KIT6434 6434 1 Hydraulic Kit (S/N 020000 & Down)

KIT6542 6542 1 Hydraulic Kit (S/N 020000 & Up)


MOUNT KITS

JOHN DEERE - 1070 (2 WD & 4 WD)Tires: Rear : 13.6 X 24 Min Tire Size & 13.6 X 28 Max Tire Size

Front: 5.50 X 16 Min Tire Size & 8-6 Max Tire SizePump: Rear PTO Mounted Aux PumpMounting: 43-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Tire Selection may Limit Tread Settings.

2. Use Rear Mounted PTO Pump, Oter Equipment cannot be operated unlessPTO Pump is removed.

3. Tractor should have Loquid in LH rear Tire & Wheel Weights.4. 8500 Model Only available there were NO 2500 Models.5. There were NO 7 ft Cutter Bar used, Only 5 & 6 ft used.

8500 Mod. (File Mod. Ref. # 8506 UV)Item Part No. Part No. Qty Description


JOHN DEERE

JOHN DEERE - 1250, 2 WD & 4 WD Utility or TurfTires: Rear : 14.9 X 28 (Utility) & 18.4-16-1 (Turf) Max Tire Size

Front: 7.50 X 16 (2 WD Utility) or 9.50 X 24 (4 WD Utility) & 27 X 9.50-15(Turf) Max Tire Size

Pump: Tractor Internal Hydraulic SystemMounting: 43-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Tire Selection may Limit Tread Settings.

2. Three Quarts of JD Trans. Oil will be needed to top off System.3. If Selective Control valve Option is used to operate Mower, Longer hoses

will have to be used, These are furnished by Dealer or Customer






JOHN DEERE - 1250, 2 WD & 4 WD Utility or TurfTires: Rear : 14.9 X 28 (Utility) & 18.4-16-1 (Turf) Max Tire Size

Front: 7.50 X 16 (2 WD Utility) or 27 X 9.50 X 24 (4 WD Turf) Max Tire SizePump: Aux. Rear Mounted PTO PumpMounting: 43-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Tire Selection may Limit Tread Settings.

2. This Model used Rear PTO Mounted Aux Pump, No Other Equipment canbe operated from PTO unless Pump is removed.




JOHN DEERE - 2020Tires: Rear : 14.9 X 28 Max Tire Size

Front: 6.00 X 16 Max Tire SizePump: Aux. Rear PTO Mounted PumpMounting: 38" Mounting = 17" Trunnion HeightSpecial: 1. With Rear Mounted PTO Pump no other Equipment can be run off PTO

unless Aux Rear Pump is removed.2. When Mounting 8500 Mod substitute later Sub-Frame Kit.






JOHN DEERE - 2040 (S/N 266750 & Up), 2150, 2155,2240 (Utility or Turf)

Tires: Rear : 16.9 X 28 (Utility) & 18.4-16-1 (Turf) Max Tire SizeFront: 6.50 - 8.00 X 16 (Utility) & 27 X 9.50-15 (Turf) Max Tire Size

Pump: Use Internal Tractor Hydraulic SupplyMounting: 45-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Swept Back Front Axles, Tractor Selection may Limit thread settings.

2. Tractor Equipped w/ Manual Steering requires TMC Cross fitting #0466600.3. JD RH Side frame Equip mounting Plate cannot be used w/ Mower Mounting.4. Tractor must be equipped: w/ 13 GPM (49 Liter/Min) Hyraulic System,

w/ Heavy Duty Oil Cooler, w/ Power Steering, w/ Pressure Control Valve,w/Transmission Oil Filter & Cover with Return Port.

5. For 2040 priot to 1978 use File Mod. ref # 2504 OPO6. 2240 Model built After Jan 1991 use Sub-Frame Kit # KIT6891


New # Old #1. KIT6430 6430 1 Sub-Frame Kit (2500 Model Only)

KIT6431 6431 1 Sub-Frame Kit (8500 Model Only)2. KIT6434 6434 1 Hydraulic Kit (2500 Model Only)

KIT6434P 6434P 1 Hydraulic Kit (8500 Model Only)

JOHN DEERE - 2150 4 Whl Drv w/ LoaderTires: Rear : 16.9 X 28 Max Tire Size

Front: 9.5 X 24 Max Tire SizePump: Rear Aux PTO Mounted PumpMounting: 42" Mounting = 18" Trunnion HeightSpecial: 1. Operates w/ Tractors Closed Center Hyd. System. Will Operate w/ TSS, HI-LO,

Reverser or Collar Shift Transmission. Tractor must be equipped. w/ 13 GPM(49 Liter/Min) Hyraulic System, w/ Heavy Duty Oil Cooler, w/ Power Steering,w/ Pressure Control Valve, w/Transmission Oil Filter Cover w/ Return Port.

2. Tractors w/ 28 GPM Closed Center Hyd. Sys. must be converted to PTO PumpOC sys. Equipment cannot be operated by PTO unless Pump it removed.

3. NO 8500 Models mounted on this Tractor.

2500 Mod. (File Mod. Ref. # 2501 UVW)


1. KIT6609 6609 1 Sub-Frame Kit (2500 Model Only)2. KIT6610 6610 1 Hydraulic Kit (2500 Model Only)


MOUNT KITS

JOHN DEERE - 2350, 2355, 2550, 2555 (2 WD & 4 WD)(Tractor Hydraulics)

Tires: Rear : 14.9 X 28 Min Tire Size & 16.9 X 30 Max Tire SizeFront: 7.50 X 16 Min Tire Size & 11.2 X 24 Max Tire Size

Pump: Use Internal Tractor Hydraulic SupplyMounting: 42" Mounting = 17" Trunnion HeightSpecial: 1. Tractors w/ Manual Steering Requires TMC Cross Fitting # 0466600.

2. JD RH Side Frame Eqip Mounting Plates are required f/ Mower Mounting.3. Tractor must be equipped: w/ 13 GPM (49 Liter/Min) Hyraulic System,


4. Tire Selections may limit Tread Setting.5. Tractor must have Vertical Exhaust

2500 Mod. (File Mod. Ref. # 2509 DEF)8500 Mod. (File Mod. Ref. # 8509 DEF)Item Part No. Part No. Qty Description



JOHN DEERE

JOHN DEERE - 2350, 2355, 2550, 2555 (2 WD & 4 WD)(Aux Front Mounted Pump)


Pump: Aux Front Mounted PumpMounting: 42" Mounting = 17" Trunnion HeightSpecial: 1. A Front mounted Pump driven thru a JD Hyd Pump w/ 17 Splines X 28 mm

Shaft (must have been specified when order original unit).2. JD RH Side Frame Eqip Mounting Plates are required f/ Mower Mounting.3. Tire Selections may limit Tread Setting.4. Tractor must have Vertical Exhaust.5. Tractors w/Optional Hyd Pump w/14 Spline X 32 mm Shaft sub.Hyd KIT6705

2500 Mod. (File Mod. Ref. # 2509 OPQ)8500 Mod. (File Mod. Ref. # 8509 OPQ)Item Part No. Part No. Qty Description



MOUNT KITS

JOHN DEERE - 2350, 2355, 2550, 2555 (2 WD & 4 WD)(Aux Rear Mounted Pump)


Pump: Aux Rear Mounted PumpMounting: 42" Mounting = 17" Trunnion HeightSpecial: 1. Tractors w/ Manual Steering Requires TMC Cross Fitting # 0466600.

2. With Rear Mounted PTO Pump mounted no other Equipment can beoperated by PTO unless Pump is removed.

3. JD RH Side Frame Eqip Mounting Plates are required f/ Mower Mounting.4. Tire Selections may limit Tread Setting.5. Tractor must have Vertical Exhaust

2500 Mod. (File Mod. Ref. # 2509 UVW)8500 Mod. (File Mod. Ref. # 8509 UVW)Item Part No. Part No. Qty Description


JOHN DEERE

JOHN DEERE - 2440, 2640Tires: Rear : 16.9 X 28 (Utility) & 18.4-16-1 (Turf) Max Tire Size

Front: 7.50 X 16 (Utility) & 27 X 9.50-16 (Turf) Max Tire SizePump: Rear PTO Mounted Aux PumpMounting: 45-1/2" Mounting = 17" Trunnion HeightSpecial: 1 2440 & 2640 require Modification of RH Step Platform.



5. Tire Selection may Limit thread Settings.






MOUNT KITS

JOHN DEERE - 2750, 2755Tires: Rear : 18.4 X 34 Max Tire Size

Front: 7.50 X 16 Max Tire SizePump: Internal Tractor Hydraulic SystemMounting: 43-1/2" Mounting = 18" Trunnion HeightSpecial: 1. Tractor Equipped w/ Manual Steering requires TMC Cross fitting #0466600.

2. JD RH Side frame Equip mounting Plate cannot be used w/ Mower Mounting.3. These Mowers Operate f/ Tractors Closed Center Hyd System & will Operate

w/ TSS, HI-LO, Reverser or Collar Shift transmission.4. Tractor must be equipped: w/ 13 GPM (49 Liter/Min) Hydraulic System,


5. Tire Selection may Limit thread Settings.6. Tractors w/ 28 GPM Pump must be converted to rear mounted PTO Pump

Open center system. Must remove PTO w/ this Pump to operate other Equip.

2500 Mod. (File Mod. Ref. # 2509 GHI)8500 Mod. (File Mod. Ref. # 8509 GHI)Item Part No. Part No. Qty Description



JOHN DEEREJOHN DEERE - 2640A (2648)Tires: Rear : 16.9 X 28 (Utility) & 18.4-16-1 (Turf) Max Tire Size

Front: 7.50 X 16 (Utility) & 27 X 9.50-16 (Turf) Max Tire SizePump: Rear PTO Mounted Aux PumpMounting: 45-1/2" Mounting = 17-1/4" Trunnion HeightSpecial: 1 Will require Modification of RH Step Platform.

2. Tractor Equipped w/ Manual Steering requires TMC Cross fitting #0466600.3. JD RH Side frame Equip mounting Plate are required w/ Mower Mounting.4. This Model uses rear Mounted Pump on PTO, No other Equipment can

be driven from PTO unless Pump is removed.5. Tire Selection may Limit thread Settings.

2500 Mod. (File Mod. Ref. # 2509 RST)8500 Mod. (File Mod. Ref. # 8509 RST)Item Part No. Part No. Qty Description



MOUNT KITS

JOHN DEERE - 300, 300B, 302A, 400, 401A, 401C, 401D w/ Loader (Manufactured after 01/01/71)


Pump: Use Loader / Tractor Hydraulic SupplyMounting: 48" Mounting = 17-1/2" Trunnion HeightSpecial: 1. This mounting will fit Tractors w/ or w/o Selector Valve

2. Mowers Operate w/ Tractors Closed Center Hydraulic System.3. Will Operate w/ TSS, HI-LO, Reverser or Collar Shift Transmission.4. Tractor must be equipped: w/ 13 GPM (49 Liter/Min) Hyraulic System,




1. KIT4797 4797 1 Sub-Frame & Hyd Kit (2500 Model Only)KIT4797P 4797P 1 Sub-Frame & Hyd Kit (8500 Model Only)

2. ---------- ------- 1 Hydraulic Kit (included in Sub-Frame Kit)

JOHN DEERE - 300, 301, 301A, 302 (Utility or Turf)Tires: Rear : 16.9 X 28 (Utility) & 18.4-16-1 (Turf) Max Tire Size

Front: 6.50 - 8.00 X 16 (Utility) & 27 X 9.50-15 (Turf) Max Tire SizePump: Use Internal Tractor Hydraulic SupplyMounting: 45-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Swept Back Front Axles, Tractor Selection may Limit thread settings.







JOHN DEERE


MOUNT KITSJOHN DEEREJOHN DEERE - 301, 301A, 302 w/ Utility LoaderTires: Rear : 14.9 X 24 Max Tire Size

Front: 7.50 - 8.00 X 16 Max Tire SizePump: Use Loader Hydraulic SupplyMounting: 47-3/4" Mounting = 17-1/2" Trunnion heightSpecial: 1. Mowers Operatrate w/ Tractors Closed Center Hydraulic System.

2. Will Operate w/ TSS, HI-LO, Reverser or Collar Shift Transmission.3. Tractor must be equipped: w/ 13 GPM (49 Liter/Min) Hyraulic System,

w/ Heavy Duty Oil Cooler, w/ Power Steering, w/ Pressure Control Valve,w/Transmission Oil Filter Cover with Return Port.



1. KIT5654 5654 1 Sub-Frame Kit (2500 Model Only)KIT7225 7225 1 Sub-Frame Kit (8500 Model Only)

2. KIT4858 4858 1 Hydraulic Kit (2500 Model Only)KIT7226 7226 1 Hydraulic Kit (8500 Model Only)

JOHN DEERE - 301 w/ 7310 LoaderTires: Rear : 14.9 X 24 Max Tire Size

Front: 7.50 - 8.00 X 16 Max Tire SizePump: Use Loader Hydraulic SupplyMounting: 47-3/4" MountingSpecial: 1. Can be operated w/ Loader removed from Tractor.





1. KIT4996 4996 1 Sub-Frame Kit2. KIT4858 4858 1 Hydraulic Kit (2500 Model Only)




JOHN DEERE - 400, 401A w/ LoaderManufactured after 01/01/71


Pump: Use Loader Hydraulic SupplyMounting: 48" Mounting = 17-1/2" Trunnion HeightSpecial: 1. This mounting will fit Tractors w/ or w/o Selector Valve





1. KIT4797 4797 1 Sub-Frame & Hyd Kit (2500 Model Only)KIT4797P 4797P 1 Sub-Frame & Hyd Kit (8500 Model Only)

2. --------- -------- 1 Hydraulic Kit (included in Sub-frame Kit)

JOHN DEERE - 401, 401B, 401D (Utilty or Turf)Tires: Rear : 16.9 X 28 (Utility) & 18.4-16-1 (Turf) Max Tire Size

Front: 7.50 X 16 (Utility) & 27 X 9.50-15 (Turf) Max Tire SizePump: Rear PTO Mounted Aux PumpMounting: 45-1/2" Mounting = 17" Trunnion HeightSpecial: 1. Tractor Equipped w/ Manual Steering requires TMC Cross fitting #0466600.

2. JD RH Side frame Equip mounting Plate cannot be used w/ Mower Mounting.3. Tractor must be equipped: w/ 13 GPM (49 Liter/Min) Hyraulic System,


4. Tire Selection may Limit thread Settings.5. Tractors w/ 28 GPM Closed Center System must be converted to PTO Pump

2500 Mod. (File Mod. Ref. # 2509 ABC)2500 Mod. (File Mod. Ref. # 2509 RST) (Tractors w/ 28 GPM Pumps)8500 Mod. (File Mod. Ref. # 8509 ABC)Item Part No. Part No. Qty Description





MOUNT KITS

JOHN DEERE - 401 w/ 7310 LoaderTires: Rear: No Tire Listings Front: No Tire ListingsPump: Use Loader Hydraulic SupplyMounting: 42-1/2" MountingSpecial: 1. Can be operated w/ Loader removed from Tractor.

2. Mowers Operate w/ Tractors Closed Center Hydraulic System.3. Will Operate w/ TSS, HI-LO, Reverser or Collar Shift Transmission.4. Tractor must be equipped: w/ 13 GPM (49 Liter/Min) Hyraulic System, w/

Heavy Duty Oil Cooler, w/ Power Steering, w/ Pressure Control Valve, w/Transmission Oil Filter Cover with Return Port.





JOHN DEERE

JOHN DEERE - 401, 401B w/ Utility LoaderTires: Rear : 14.9 X 24 Max Tire Size

Front: No Tire LstingsPump: Use Tractor Internal Hydraulic SupplyMounting: 47-3/4" Mounting = 17-1/2" Trunnion HeightSpecial: 1. Mowers Operate w/ Tractors Closed Center Hydraulic System.








MOUNT KITSJOHN DEEREJOHN DEERE - 410D w/ LoaderTires: Rear : 14.9 X 24 Max Tire Size Front: No Tire LstingsPump: Use Tractor Internal Hydraulic SupplyMounting: 51-1/2" Mounting = 17-1/2" Trunnion HeightSpecial: 1. Mowers Operate w/ Tractors Closed Center Hydraulic System.



4. Tractors w/ or w/o Selector Valve.5. Tractors with 28 GPM Closed Center Hydraulic System must be converted

to rear PTO Pump open Center system. No other Equipment canbe oper-ated by PTO unless Pump it removed.





JOHN DEERE - 5200, 5300, 5400 (2 WD or 4 WD)Tires: Rear : 16.9 - 30 Max Tire Size Front: 7.50 -16 Max Tie SizePump: Front Mounted Aux PumpMounting: 41-3/4" Mounting = 16 " Trunnion Height (2 WD) or 18" Trunion Height (4 WD)Special: 1. RH Step Platform modification required.

2. Tire Selection may limit Tread Settings.3. Requires use of # 0745500 Pulley Plate Adapter



1. KIT6907 6907 1 Sub-Frame Kit (02975240)2. KIT6906 6906 1 Hydraulic Kit (02974822)


MOUNT KITSKABOTA

KABOTA - M4050, M4050DT, M4500F, M4500DTTires: Rear : No Tire Listings

Front: No Tire ListingsPump: Front Mounted Aux PumpMounting: 43" (2500) & 50" (8500) Mounting = _____" Trunnion Height (No Listings)Special: 1. Front Bumper Weights CAN NOT be used with this Mounting.




KABOTA - L345, L345DTTires: Rear : No Tire Listing

Front: No Tire ListingPump: Front Mounted Aux PumpMounting: 37-1/2" (2500) & 44-1/2" (8500) Mounting = ____" Trunnion Height (Not Listed)Special: 1. Front Bumper Weights CAN NOT be used with this Mounting.

2. Dealer to Add 450 lbs. Weight to LH rear Wheel, Calcium / Waterand/or Wheel Weights

3. Max. rear Tread Setting 67".

2500 Mod. (File Mod. Ref. # 2567 ABC)8500 Mod. (File Mod. Ref. # 8517 DEF)




MOUNT KITS

KABOTA - L2850 (2 WD & 4 WD)Tires: Rear : 12.4 - 24 Max Tire Size

Front: 7.00 - 16 Max Tire SizePump: Front Mounted Aux. PumpMounting: 40-3/4" (2500) & 47-3/4 (8500) Mounting = ____" Trunnion Height (Not Listed)Special: 1. Front Bumper Weights CAN NOT be used with this Mounting.

2. Dealer to Add 450 lbs. Weight to LH rear Wheel, Calcium / Waterand/or Wheel Weights




KABOTA

KABOTA - L3350 (4 WD)Tires: Rear : 12.4 - 24 Min Tire Size & 14.9 - 24 Max Tire Size

Front: 7.00 - 16 Min Tire Size & 9.5 - 16 Max Tire SizePump: Front Mounted Aux. PumpMounting: 43-1/2" (2500) & 50-1/2 (8500) Mounting = ____" Trunnion Height (Not Listed)Special: 1. Front Bumper Weights CAN NOT be used with this Mounting.

2. RH Step must be removed to mount Sub-Frame3. No Tread restrictions on this mounting.





MOUNT KITSKABOTA

KABOTA - L5450Tires: Rear : No Tire Listings

Front: No Tire ListingsPump: Internal Tractor Hydraulic SystemMounting: 43-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. This Model uses Tractors Open Center Hydraulics.




KABOTA - L3750, L4150 (2 WD & 4 WD)Tires: Rear : 14.9 - 24 Min Tire Size & 13.6 - 28 Max Tire Size

Front: 6.00 - 16 Min Tire Size & 8.3 - 20 Max Tire SizePump: Rear PTO Mounted Aux. PumpMounting: 43-1/2" (2500) & 50-1/2 (8500) Mounting = ____" Trunnion Height (Not Listed)Special: 1. This Model Uses Rear Mounted PTO Pump. No other Equipment can be

operated by PTO unless Pump is removed.2. RH Step must be removed to mount Sub-Frame3. Tread Restrictions on Rear 60" w/ 13.6 - 28 Tires, None on Front.





MOUNT KITSKABOTA

KABOTA - M4030SUTires: Rear : R3 21.51 -16.1 Approved Tire Size

Front: 28 X 12.5 - 15 Approved Tire SizePump: Front Mounted Aux. PumpMounting: 41-1/2" Mounting = 17" Trunnion HeightSpecial:





MOUNT KITS

MF - 20Tires: Rear : 14.9 - 24 Max Tire Size

Front: No Tire ListingPump: Front Mounted Aux. PumpMounting: 40" Mounting = 15-1/2" Trunnion HeightSpecial: None




MASSEY FERGUSONMF - 165Tires: Rear : No Tire Listing

Front: No Tire ListingPump: Front Mounted Aux PumpMounting: 38" Mounting = ____" Trunnion Height (Not Listed)Special: 1. No 8500 Models Mounts for this Tractor Application. 2500 Model Only




MF - 20CTires: Rear : 14.9 - 24 or 21.5L X 16.1 Max Tire Size

Front: No Tire ListingPump: Front Mounted Aux. PumpMounting: 43-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Tractor must be equipped w/ Crankshaft Adapter #704-812-M93

w/Fasteners2. No 8500 Models mounted for this Tractor application.




MOUNT KITSMASSEY FERGUSON

MF - 230 Std, 245 Std, 240, 250(Front Mounted Aux. Pump)

Tires: Rear : 12.4 - 24 Min Tire Size & 13.6 - 28 Max Tire Size (MF230 Listings)Front: 6.00 - 16 Max tire Size (MF230 Listings)

Pump: Front Mounted Aux. PumpMounting: 43" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Tractors Must be equipped w/ MF Adapter # 704-812-2M1. (Engine

Mounted Pump Model Only)2. MF 250 Must be equipped w/ Hollow Front Axle Pin # 105-892-2M1.

(Engine Mounted Pump Only)



1. KIT5894 5894 1 Sub-Frame Kit (2500 Model)KIT5974 5974 1 Sub-Frame Kit (8500 Model)


MF - 230 Std, 245 Std, 240, 250(Rear PTO Mounted Pump)

Tires: Rear : 12.4 - 24 Min Tire Size & 13.6 - 28 Max Tire Size (MF230 Listings)Front: 6.00 - 16 Max tire Size (MF230 Listings)

Pump: Rear PTO Mounted Aux. PumpMounting: 43" Mounting = ____" Trunnion Height (Not Listed)Special: None






MOUNT KITS

MF - 253 Utility & 253 Lo-Profile(Front Mounted Pump)

Tires: Rear : 14.9 X 28 (Utility) & 18.4 - 16.1 (Lo-Profile) Max tire SizeFront: 6.50 X 16 (Utility) & 11.0 - 15 (Lo-Profile) Max tire Size

Pump: Front Mounted Aux PumpMounting: 45-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Tractors Must be equipped w/ MF Adapter # 704-812-M93 w/ Fasteners.

2. Tractors Must be equipped w/ Hollow Front Axle Pin # 105-892-2M2.3. Max Tread Settings: Regulated by Tire Sizes.4. No 8500 Models for this Tractor Application, 2500 Models Only.




MF - 245 OrchardTires: Rear : 18.4 - 16.1 Max Tire Size

Front: 9.00 - 10 Max tire SizePump: Front Mounted Aux. PumpMounting: 43-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. No 8500 Models Mounted for this application only 2500 Models.




MASSEY FERGUSON



MF - 253 Utility & 253 Lo-Profile(Rear PTO Mounted Pump)

Tires: Rear : 14.9 X 28 (Utility) & 18.4 - 16.1 (Lo-Profile) Max tire SizeFront: 6.50 X 16 (Utility) & 11.0 - 15 (Lo-Profile) Max tire Size

Pump: Rear PTO Mounted Aux PumpMounting: 45-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: 1. This Model Uses rear PTO Mounted Pump, No other equipment can be

run from PTO unless Pump is removed.2. Max Tread Settings: Regulated by Tire Sizes.3. No 8500 Models Mounts for this Tractor Application. 2500 Model Only.




MF - 255, 265, 275Tires: Rear : 18.4 X 26 Max tire Size

Front: No ListingPump: Front Mounted Aux PumpMounting: 38" Mounting = ____" Trunnion Height (Not Listed)Special: 1. Max Tread Setting, 64" Rear





MOUNT KITS

MF - 30, 31, 3165Tires: Rear : No Tire Listing

Front: No Tire ListingPump: Front Mounted Aux PumpMounting: 38" Mounting = ____" Trunnion Height (Not Listed)Special: 1. No 8500 Models Mounts for this Tractor Application. 2500 Model Only




MASSEY FERGUSON

MF - 270, 283, 290Tires: Rear : 16.9 X 30 Max tire Size

Front: 9.5L X 15 Max tire SizePump: Front Mounted Aux PumpMounting: 43-1/2" Mounting = ____" Trunnion Height (Not Listed)Special: None





MOUNT KITS

MF - 30BTires: Rear : No Tire Listing

Front: No Tire ListingPump: Front Mounted Aux PumpMounting: 42" Mounting = ____" Trunnion Height (Not Listed)Special: None





MASSEY FERGUSON

MF - 32, 34, 100, 200, LoadersTires: Rear : No Tire Listings

Front: No Tire ListingsPump: Used Loader Hydraulic SystemMounting: 46" Mounting = ____" Trunnion Height (Not Listed)Special: 1. MF Power Beyond Fitting # 705-372-M9 required f/ 100 & 200 Loaders

to be furnished by Dealer.2. Two MF Filter Gaskets are required, to be furnished by Dealer.3. No 8500 Models Mounts for this Tractor Application. 2500 Model Only





MOUNT KITS

MF - 35 Red, 135 RedTires: Rear : No Tire Listing

Front: No Tire ListingPump: Front Mounted Aux. PumpMounting: 40" Mounting = 15-1/2" Trunnion HeightSpecial: Tractor Must Be Equipped W/ (Massey Ferguson Part Numbers Listed)

1. Hollow Front Axle Pin # 1860-024-M2 (Diesel) or # 183-221-M1 (Gas) .2. Pulley # 734-628-M1 (Diesel) or # 182-7+A116-M1 (Gas).3. Crankshaft Adapter # 704-812-M93 w/ Mounting Fasteners & Shaft

# 708-833-M1




MASSEY FERGUSON

MF - 32A, 34A Loaders w/ Cessna ValveTires: Rear : 16.9 - 24 R1 Max Tire Size

Front: No Tire ListingsPump: Used Loader Hydraulic SystemMounting: 50" Mounting = 18" Trunnion HeightSpecial: 1. Use File Mod. ref # 2535 GHI f/ Loaders w/ Parker Hannifin Valve.

2. Use Hyd Kit # KIT6215 if Loader / Tractor has Back Hoe. or Use Hyd.Kit # KIT6214 if No Back Hoe on Tractor.

3. No 8500 Models Mounts for this Tractor Application. 2500 Model Only



1. KIT6213 6213 1 Sub-Frame Kit2. KIT6214 6214 1 Hydraulic Kit (w/o Back Hoe on Tractor)

KIT6215 6215 1 Hydraulic Kit (w/ Back Hoe on Tractor)



MF - 375 TwinTires: Rear : 14.9 - 28 Max Tire Size

Front: 7.50 - 16 Max Tire SizePump: Front Mounted Aux. PumpMounting: 43" Mounting = 17" Trunnion HeightSpecial: None




MF - 383, 390Tires: Rear : 16.9 - 28 Min Tire Size & 16.9 - 30 Max Tire Size

Front: 7.5L - 15 Min Tire Size & 7.50 - 16 Max Tire SizePump: Front Mounted Aux. PumpMounting: 43" Mounting = ____" Trunnion Height (Not Listed)Special: 1. RH Step & Forward Battery Box Handle Must be removed.

2. Max Tread Settings: Rear 70", Front No Restrictions.

2500 Mod. (File Mod. Ref. # 2530 XYZ)8500 Mod. (File Mod. Ref. # 8530 XYZ)




MOUNT KITS

MF - 40BTires: Rear : No Tire Listing

Front: No Tire ListingPump: Front Mounted Aux. PumpMounting: 37" Mounting = ____" Trunnion Height (Not Listed)Special: None




MASSEY FERGUSON

MF - 40Tires: Rear : 16.9 - 24 Max Tire Size

Front: No Tire ListingPump: Front Mounted Aux. PumpMounting: 40" Mounting = ____" Trunnion Height (Not Listed)Special: None





MOUNT KITS

MF - 50ETires: Rear : 18.4 - 26 Max tire Size

Front: 6.50 - 16 Max tire SizePump: Front Mounted Aux. PumpMounting: 42-1/2" Mounting = _____" Trunnion Height (Not Listed)Special: 1. Max Tread Settings: Rear 68"

2. No 8500 Models f/ This Tractor Application, 2500 Models Only.




MASSEY FERGUSON


SUB-FRAME KITS

Sub- Frame Kit Section

1. Kit Number, This is the Kit used to mount Mower heads to Tractor. It includes Hardware (Hardware NOT listed in this Section) and main Components as listed to Right of Kit Number.

2. These Sub-frame Kits are listed as a reference ONLY and are no longer used in production asthis model has been discontinued.

3. DO NOT ORDER Sub-Frame Kits as Parts as they may contain more Parts than you want, ForParts & Hardware components that are in kit but is not listed here contact Alamo IndustrialCustomer Service Dept.

IMPORTANT NOTE:Hardware IS NOT Listed in this section even though theyare included in KITs, Some Bracing Part ARE NOT Listedhere even though they are included in KITS, For The PartsNOT Listed here Contact Alamo Sales Dept. for assistanceof these Parts.


SUB-FRAME KITSComponents / Parts

Kit No. = Sub-Frame I Sub-Frame II Valve Brkt Spacer -(Mnt to Trac) (Mwr Mnt ) Shims

02974980 = 0742100 0725900 None (19) 074140002974982 = 0647000 (16) None 02974977 036310D02974987 = 0665400 0665500 (8) 02974964 Shims (9)

02975240 = 0690400 0699900 02975253 None02975996 = 0643700 0665200 (8) 02974964 Shims (9)

02977319 = 0656900 (5 &16) 0635200 (1) 02974977 036310D02978063 = 0586100 (16) None 02974977 0486500KIT1417 = 0137200 (26) 0433400 (1) 0674500 0130600 (26)

KIT2378 = 0237600 None 0679800 0574400KIT2863 = 0284800 None 0463000 (2) 028480DKIT3107 = 0310400 (31) None 0725700 NoneKIT3364 = 0336200 None 0675900 NoneKIT3394 = 0565700 (15) None 0666600 0486500KIT3632 = 0363100 None 0667000 0574400KIT4158 = 0415400 None 0676000 NoneKIT4406 = 0458300 (27) None 0666800 0458400KIT4590 = 0614000 (5) 0714300 (1) 0711500 043180CKIT4797 = 0368900 (11) None 0586700 (12) 0649400KIT4797P = 0368900 (11) None 0586700 (12) 0649400KIT4856 = 0497600 None 0497800 NoneKIT4996 = 0499700 None 0499800 NoneKIT5324 = 0532300 None 0666700 Shims (9)

KIT5358 = 0542200 0541700 0666800 0561200KIT5401 = 0539700 None 0666700 NoneKIT5457 = 0542600 None 0542800 NoneKIT5654 = 0565100 None 0565300 NoneKIT5655 = 0565200 None 0565300 NoneKIT5723 = 0571600 0561500 0666800 0561200KIT5811 = 0581000 (4) 0567900 (1) 0680300 (3) NoneKIT5830 = 0583100 (6) 0567900 (1) 0583200 (3) NoneKIT5862 = 0586100 None 0666600 0486500KIT5885 = 0587500 None 0666000 (32) NoneKIT5892 = 0590800 None 0666000 (28) NoneKIT5894 = 0589800 None 0666000 (28) NoneKIT5944 = 0594100 (14) None 0669900 NoneKIT5978 = 0597900 None 0666600 0486500KIT6128 = 0612900 0541700 0666000 (33) NoneKIT6153 = 0614100 None 0670000 (17) NoneKIT6164 = 0616000 0573100 (5) 0666000 NoneKIT6213 = 0593100 None 0621200 NoneKIT6250 = 0626600 (18) None 0666000 NoneKIT6303 = 0630600 (29) 0573100 0666000 NoneKIT6350 = 0635100 0635200 0676300 NoneKIT6397 = 0639600 None 0666000 NoneKIT6401 = 0640400 0640500 (7) 0666000 NoneKIT6430 = 0643500 0643700 (1) 0643900 NoneKIT6431 = 0643600 0643700 (1) 0643900 None


SUB-FRAME KITSComponents / Parts

Kit No. = Sub-Frame I Sub-Frame II Valve Brkt Spacer -(Mnt to Tractor) (Mower Mount ) Shims

KIT6432 = 0643500 (10) 0643700 (1) 0643900 NoneKIT6433 = 0643600 (10) 0643700 (1) 0643900 NoneKIT6464 = 0646500 0643700 (1) 0666900 NoneKIT6469 = 0647000 None 0666600 036310DKIT6471 = 0647200 0363100 0666600 NoneKIT6473 = 0647400 None 0666600 036310DKIT6512 = 0614100 0651300 (1) 0666000 (20) NoneKIT6525 = 0652100 (25) None 0681300 (25)

KIT6530 = 0653100 (13) 0643700 (1) 0643900 NoneKIT6532 = 0653300 (13) None 0643900 NoneKIT6537 = 0653600 None 0586700 NoneKIT6560 = 0656900 (5) 0635200 (1) 0666600 036310DKIT6566 = 0676700 0643700 (1) 0676800 NoneKIT6576 = 0657700 0643700 (1) 0676800 NoneKIT6586 = 0658300 None (30) NoneKIT6597 = 0659500 (35) 0643700 0666900 0430300KIT6606 = 0660500 0635200 0666000 NoneKIT6609 = 0661100 None 0661200 NoneKIT6651 = 0665200 0643700 (1) 0666000 Shims (9)

KIT6653 = 0665400 0665500 (8) 0666000 Shims (9)

KIT6691 = 0669200 0665400 (1) 0686300 NoneKIT6713 = 0657700 (10) 0643700 (1) 0657800 NoneKIT6725 = 0672300 None 0686400 Shims (9)

KIT6730 = 0672900 0665400 (1) 0686300 NoneKIT6750 = 0674700 0635200 0675200 NoneKIT6769 = 0677000 None 0666900 NoneKIT6775 = 0677600 None 0686300 NoneKIT6791 = 0657700 (10) 0643700 (1) 0676800 NoneKIT6793 = 0679400 None 0666000 (33) NoneKIT6832 = 0653100 (13) 0643700 (1) 0676800 NoneKIT6865 = 0686600 None 0666000 NoneKIT6873 = 0655900 (5) 0635200 (1) 0666600 036310DKIT6874 = 0687600 0665400 0666000 (33) NoneKIT6907 = 0690400 0699900 0690300 NoneKIT6945 = 0694600 0643700 (1) 0666900 NoneKIT6968 = 0696300 (21) None 0696700 0695300KIT6987 = 0697400 (22) None 0698300 NoneKIT7025 = 0647000 (23) None 0702200 036310DKIT7051 = 0703600 0643700 (1) 0666000 NoneKIT7060 = 0705700 (34) 0635200 0705900 NoneKIT7088 = 0706400 (36) 0643700 (36) 0708100 (36) NoneKIT7109 = 0710200 (37) (37) NoneKIT7116 = 0711000 None 0710500 NoneKIT7133 = 0672900 (5) 0665400 (1) 0713600 (24) 0671600KIT7179 = 0717800 None 0427900 028480DKIT7225 = 0657700 0643700 (1) 0676800 NoneKIT7441 = 0742100 0725900 None (19) 0741400


SUB-FRAME KITS

( ) NOTES: See Sub-Frame-Kit No. on Previous Pages. These Notes

ONLY Apply to Sub-Frame Kits on Previous Pages.

(All) All Cutters used the # 00114600 Stop Pin (Transport Pin) & # 00112400 Hair Pin retaining Pin.(1) This Mower Mount (Sub-Frame) Bolts to Tractor and/or Loader Mounting Sub-Frame.(2) Valve bracket Mounts to Loader Frame useing Bolts and is not in Sub-Frame Kit BM.(3) Valve bracket Mounts to Loader Frame useing Bolts and is in Sub-Frame Kit BM.(4) Sub-Frame Welds to Loader Frame.(5) Sub-Frame Bolts to Tractor & Mower Sub-frame will Bolt to that Sub-Frame.(6) Sub-Frame Bolts to Loader Frame & Mower Sub-frmae Bolt to it.(7) This is Cross Frame that Holds Sub-Frame.(8) This is Main-Frame.(9) These Are Shims, Qty used a/r # 0685900 & 0686000.(10) Sub-Frame Extension # 0643800 to Mount Sub-Frame to Tractor.(11) Sub-Frame KIT4797 w/ Hyd. Kit Components, Sub-Frame Welds to Loader Frame.(12) This Welds to Loader Frame.(13) Sub-Frame Brace # 0654300, Bolts under Tractor.(14) Plate Assembly # 0594500 for mounting.(15) Sub-Frame Support Brace # 0574100.(16) Sub-Frame Kit includes Installation Drawing, See BM f/ Drawing Number.(17) Diverter Valve Bracket # 0264700 included w/ this Sub-Frame Kit.(18) Support Plate # 0666500 & Bracket # 0626700 included in this Sub-Frame Kit.(19) Not included in Sub-Frame Kit.(20) Valve Support Bracket # 0651400 included in Sub-Frame Kit.(21) Mounting Plate # 0695900 f/ Sub-Frmare & Riser # 0696600 to Mount Valve Stand.(22) Battery Box Support # 0698600 included in Sub-Frame Kit.(23) Tool Box Bracket # 0702600 included in Sub-Frame Kit.(24) Valve Support # 0713000 Included in Sub-Frame Kit, Valve Stand is not included in Kit.(25) Support Brace # 0652200 & Spacers # 0652400 & 0652700 included in Sub-Frame Kit.(26) Plate # 0561800, Spacer # 0561900 , RH # 0142400 & LH # 0142500 Angle Brace in Kit.(27) Brace # 0458200 included in Kit.(28) Valve Support Bracket # 0651900 included in Sub-Frame Kit.(29) Mounting Strap # 0630700 included in Sub-Frame Kit.(30) Valve Plate # 066600A & Valve Plate Angle # 0676100 included in Sub-Frame Kit.(31) Sub-Frame Support Brace # 0310500 & Plates # 0495600 & 0495700 in Sub-Frame Kit.(32) Valve Support Bracket # 0587900 included in Sub-Frame Kit.(33) Valve Support Bracket # 0613000 included in Sub-Frame Kit.(34) Main Frame Extension # 0674800 & Axle Plate # 0674900 included in Sub-Frame Kit.(35) Cross frame # 0659600 included in Sub-Frame Kit.(36) This is Twin Unit RH & LH Wings, Use #0706400 RH & # 0706300 LH Sub-Frame. Use

# 0643700 RH & # 00706500 LH Cutter Mount Sub-Frame, Use # 0708100 RH & 0708200LH Valve Bracket, Use # Also use # 0708000 Belly Plate, Included in Sub-frame Kit.

(37) Sub-Frame KIT7109 w/ Hyd. Kit Components.


SUB-FRAME KITSNOTES


HYDRAULIC KITS

Hydraulic Kit Section

1. Kit Number, This is the Kit used to mount Hydraulic to the Tractor for Mower head operation.It includes Hardware (Hardware NOT listed in this Section) and main Components as listedBelow Kit Number.

2. These Hydraulic Kits are listed as a reference ONLY and are no longer used in production asthis model has been discontinued.

3. DO NOT ORDER Hydraulic Kits as Parts as they may contain more Parts than you want, ForParts & Hardware components that are in kit but is not listed here contact Alamo IndustrialCustomer Service Dept. (Nuts, Bolts, Fitting, Hose Adapters & other components in Kit are NOTListed in this Listing.)

4. There have been some changes in the components of these kits, Mainly the Pumps have been replaced with a different type Pump, Check all NOTES that are liste dwith these Hydraulic Kits.

5. Also listed w/ Hyd Kits is a Completeing Kit Listed, This was used to complete the Hydraulic Kit and Head could not be completed without it. Check Tractor Models to see if a Completing Kit was required.

IMPORTANT NOTE:Hardware IS NOT Listed in this section even though theyare included in KITs, Fittings as well as some other PartsARE NOT Listed here even though they are included inKITS, For The Parts NOT Listed here Contact Alamo SalesDept. for assistance with these Parts.

Triumph Sickle Bar (Archive Book) 10/02

© 2002 Alamo Group Inc.Parts Section -84

HYDRAULIC KITSComponents / Parts

02974983 Hydraulic KitItem Part No. Part No. Qty Description

New # Old #02974983 ------ -- Hydraulic Kit Asy, w/ Following Items

1. 02965454 ------ 1 Hose Asy, 1/2" X 46"2. 001771 ------ 2 Hose Asy, 1/4" X 48"3. 02972980 ------ 2 Hose Asy, 1/2" X 80"4. 02975239 ------ 1 Hose Asy, 3/8" X 96"5. 107559 ------ 1 Hose Asy, 3/8" X 52"6. 0494000 4940 1 Hose, 1" ID (approx 4" Long)7. 02974302 ------ 1 Pump, 1.16 / 0.49 CID8. 0419500 4195 1 Jackshaft8. 0148600 1486 1 Key9. 0336600 3366 1 Pump Bracket10. 0429400 4294 1 Pulley Adapter Asy.11. 02975188 ------ 1 Flex Coupling Asy



1. 02275900 ------ 1 Hose Asy, 3/8" X 35"2. 001977 ------ 1 Hose Asy, 1/4" X 76"3. 001978 ------ 1 Hose Asy, 1/4" X 69"4. 02975454 ------ 1 Hose Asy, 1/2" X 46"5. 02972980 ------ 2 Hose Asy, 1/2" X 80"6. 03200277 ------ 1 Hose Asy, 3/8" X 72"7. 0494000 4940 1 Hose, 1" ID (approx 4" Long)8. 0703200 7032 1 Hose Support9. 02974302 ------ 1 Pump, 1.16 / 0.49 CID10. 0742500 7425 1 Pump Mount Weldment11. 02975188 ------ 1 Flexible Coupling Asy.12. 0742700 7427 1 Pump Shaft13. 0743600 7436 1 Pump Drive Adapter14. 0743700 7437 1 Chain Asy.15. 0757500 7575 1 Sprocket16. 0757800 7578 1 Master Link Chain Connector17. 0148600 1486 1 Key, Square Key18. 000052 ------ 1 Key, Woodruff key18. 02966687 ------ 2 Adjusting Yoke End Hole Dia.20. 02966688 ------ 2 Clevis Pin21. 02968698 ------ 2 Cotter Pin22 02975200 ------ 1 Drawing, Remote Control Asy. Instructions23. 02971202 ------ 2 Cable, Remote Control 72" Long24. 02974296 ------ 1 Switch Mount Weldment25. 02974299 ------ 1 Angle, Remote Control Mount26. 02974323 ------ 2 Angled Single Axis Control Asy.27. 0749900 7499 1 Tube Lever Support Bracket28 0743300 ------ 1 Tank Support Weldment29. 0743800 7438 4 Spacer, Battery Plate


HYDRAULIC KITS



1. 02965454 ------ 1 Hose Asy, 1/2" X 46"2. 001771 ------ 2 Hose Asy, 1/4" X 48"3. 02972980 ------ 2 Hose Asy, 1/2" X 80"4. 02975239 ------ 1 Hose Asy, 3/8" X 96"5. 107559 ------ 1 Hose Asy, 3/8" X 52"6. 0494000 4940 1 Hose, 1" ID (approx 4" Long)7. 02974302 ------ 1 Pump, 1.16 / 0.49 CID8. 0684600 6846 1 Pump Shaft9. 0656500 6565 1 Pump Bracket10. 0684500 6845 1 Adapter Plate11. 02975188 ------ 1 Flex Coupling Asy12. 701485 ------ 1 Front Coupler, Machined13 701573 ------ 1 Front Coupler Asy.14. 0646000 6460 1 Hydraulic Tank Asy.15. 0662100 6621 1 Tank Bracket

Components / Parts02974984 Hydraulic Kit

Item Part No. Part No. Qty DescriptionNew # Old #02974984 ------ -- Hydraulic Kit Asy, w/ Following Items

1. 02965454 ------ 1 Hose Asy, 1/2" X 46"2. 001771 ------ 2 Hose Asy, 1/4" X 48"3. 02972980 ------ 2 Hose Asy, 1/2" X 80"4. 02975239 ------ 1 Hose Asy, 3/8" X 96"5. 107559 ------ 1 Hose Asy, 3/8" X 52"6. 0494000 4940 1 Hose, 1" ID (approx 4" Long)7. 02974302 ------ 1 Pump, 1.16 / 0.49 CID8. 0419500 4195 1 Jackshaft8. 0148600 1486 1 Key9. 0335700 3357 1 Pump Bracket10. 0429400 4294 1 Pulley Adapter Asy.11. 02975188 ------ 1 Flex Coupling Asy

KIT1418 Hydraulic KitItem Part No. Part No. Qty Description

New # Old #

KIT1418 1418 -- Hydraulic Kit Asy, w/ Following Items1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 1148 1 Hose Asy, 1/4" X 36"3. 0496400 4964 1 Hose, 1/2" X 102"4. 0302500 3025 1 Hose Asy, 1/4" X 48"5. 0494000 4940 1 Hose, 1" ID (approx 10" Long)

(Continued Next Page)



HYDRAULIC KITS


New # Old #KIT2193 2193 -- Hydraulic Kit Asy, w/ Following Items

1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2""2. 0114800 1148 2 Hose Asy, 1/4" X 36"3. 0057500 575 1 Hose, 1/2" X 90"4. 0494000 4940 1 Hose, 1" ID (approx 9" Long)5. 0169900 1699 1 *Pump (replaced by New Pump 02973292)

02973292 ------- 1 Pump (1.020 CID)02973295 ------- 1 Drawing, Pump Instructions

6. 0165100 1651 1 Pump Plate7. 0220500 2205 1 Pump Bracket8. 0220600 2206 2 Spacer9 0370600 3706 2 Spacer10. 0652000 6520 1 Jackshaft11. 0218900 2189 1 Pulley Disc12. 0296200 2962 1 Pulley Adapter Asy.13. 0148600 1486 1 Key14. 0646000 6460 1 Hydraulic Tank Asy.15. 0655000 6550 1 *Governor (Not Used with new Pump)

*NOTE: Governor & Old Pump no longer listed in Kit, Only new Pump Listed. Pump # 02973292 israted for 1800 to 2100 RPM, New Pump will NOT use Governor.

Components / Parts

KIT1418 Hydraulic Kit (Continued From Previous Page)Item Part No. Part No. Qty Description

New # Old #6. 0169900 1699 1 *Pump (replaced by New Pump 02973292)


7. 0561700 5617 1 Pump Mounting Bracket8. 0415300 4153 1 Jackshaft9. 0296200 2962 1 Pulley Adapter10. 0218900 2189 1 Pulley Disc11. 0646000 6460 1 Hydraulic Tank Asy.12. 0655000 6555 1 *Governor (Not Used with new Pump)




1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2 0151400 1514 1 Hose Asy, 1/2" X 84"3. 0302400 3024 2 Hose Asy, 1/4" X 42"4. 0494000 4940 1 Hose, 1" ID (approx 8" Long)



HYDRAULIC KITSComponents / PartsKIT2380 Hydraulic Kit (Continued From Previous Page)


5. 0169900 1699 1 *Pump (replaced by New Pump 02973292)02973292 ------- 1 Pump (1.020 CID)02973295 ------- 1 Drawing, Pump Instructions

6. 0165100 1651 1 Pump Plate7. 0132500 1325 1 Bracket8. 0370600 3706 2 Spacer9. 0487700 4877 1 Jackshaft10. 0537800 5378 1 Pulley Adpater Asy.11. 0223500 2235 1 Flexible Coupler Asy.12. 0148600 1486 1 Key13. 0646000 6460 1 Hydraulic Tank Asy.14. 0655000 6550 1 *Governor (Not Used with new Pump)




1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2. 0151400 1514 1 Hose Asy, 1/2" X 84"3. 0302400 3024 2 Hose Asy, 1/4" X 42"4. 0494000 4940 1 Hose, 1" ID (approx 8" Long)5. 0169900 1699 1 *Pump (replaced by New Pump 02973292)


6. 0165100 1651 1 Pump Plate7. 0223500 2235 1 Flexible Coupler8. 0276500 2765 1 Pump Bracket9. 0370600 3706 2 Spacer10. 0646000 6460 1 Hydraulic Tank Asy.11. 0655000 6550 1 *Governor (Not Used with new Pump)



New # Old #

KIT2864 2864 -- Hydraulic Kit Asy, w/ Following Items1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2. 0114800 1148 1 Hose Asy, 1/4" X 36"3. 0318500 3185 1 Hose, 1/2" X 96"4. 0302400 3024 1 Hose Asy, 1/4" X 42"




HYDRAULIC KITS



1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2. 0114800 1148 2 Hose Asy, 1/4" X 36"3. 0291000 2910 1 Hose, 3/4" X 60"4. 0494000 4940 1 Hose, 1" ID (approx 8" Long)5. 0655000 6550 1 Governor


New # Old #5. 0494000 4940 1 Hose, 1" ID (approx 9" Long)6. 0169900 1699 1 *Pump (replaced by New Pump 02973292)


7. 0229000 2290 1 Pump Plate8. 0419500 4195 1 Jackshaft9. 0537800 5379 1 Pulley Adapter Asy.10. 0646000 6460 1 Hydraulic Tank Asy.11. 0655000 6550 1 *Governor (Not Used with new Pump)


Components / Parts





6. 0331700 3317 1 Transition Plate7. 0331800 3318 1 Shaft & Coupling Asy.8. 0646000 6460 1 Hydraulic Tank Asy.9. 0301400 3014 1 Tank Bracket10. 0655000 6550 1 *Governor (Not Used with new Pump)



HYDRAULIC KITSComponents / PartsKIT3245 Hydraulic Kit

Item Part No. Part No. Qty DescriptionNew # Old #KIT3245 3245 -- Hydraulic Kit Asy, w/ Following Items

1. 0180600 1806 2 Hose Asy, 1/2" X 72"2. 0151300 1513 1 Hose Asy, 1/4" X 54"3. 0291100 2911 1 Hose, 3/4" X 30"4. 0343500 3435 1 Hose Asy, 1/4" X 60"5. 0494000 4940 1 Hose, 1" ID (approx 3" Long)6. 0375500 3455 1 Check Valve7. 0655000 6550 1 Governor



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0300700 3007 1 Hose Asy, N/A" X N/A" (Obsolete)3. 0291100 2911 1 Hose Asy, 3/4" X 30"4. 0301000 3010 1 Hose Asy, 1/2" X 41"5. 0343500 3435 1 Hose Asy, 1/4" X 60"6. 0300800 3008 1 Tube Elbow, Long7. 0494000 4940 1 Hose, 1" ID (approx 5" Long)8. 0300600 3006 1 Spacer9. 0375500 3755 1 Check Valve





6 0361900 3619 1 Pump Bracket7. 0418500 4195 1 Jackshaft8. 0148600 1486 1 Key9. 0574300 5743 1 Pulley Adapter Asy.10. 0646000 6460 1 Hydraulic Tank Asy.11. 0655000 6550 1 *Governor (Not Used with new Pump)




HYDRAULIC KITS



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0302400 3024 2 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 3" Long)4. 0169900 1699 1 *Pump (replaced by New Pump 02973292)


5. 0148600 1486 1 Key6. 0223500 2235 1 Flexible Coupling Asy.



1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2. 0180600 1806 1 Hose Asy, 1/2" X 72"3. 0114800 1148 2 Hose Asy, 1/4" X 36"4. 0494000 4940 1 Hose, 1" ID (approx 7" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973291)

02973291 ------- 1 Pump (0.840 CID) (new Pump)02973295 ------- 1 Drawing, Pump Instructions (f/ new Pump)

6. 0415300 4153 1 Jackshaft7. 0415500 4155 1 Pump Bracket8. 0148600 1486 1 Key9. 0415100 4151 1 Pulley Adapter10. 0415600 4156 1 Tank Bracket11. 0646000 6460 1 Hydraulic Tank Asy.12. 0430400 4304 4 Spacer13. 0655000 6550 1 *Governor (Not used w/ New Pump #02973291)

*NOTE: Governor & Old Pump no longer listed in Kit, Only new Pump Listed. Pump # 02973291 israted for 2100 to 2500 RPM, New Pump will NOT use Governor. (New Pump May 1989 & Up)



1. 0180600 1806 2 Hose Asy, 1/2" X 72"2. 0318500 3185 1 Hose Asy, 1/2" X 96"3. 0302500 3025 2 Hose Asy, 1/4" X 48"4. 0494000 4940 1 Hose, 1" ID (approx 13" Long)5. 0679000 6790 1 Pump, PTO Pump6. 0646000 6460 1 Hydraulic Tank Asy.7. 0691200 6912 1 Universal Torque Arm Kit8. 0655000 6550 1 Governor

Components / Parts






7. 0429400 4294 1 Pulley Adapter Asy.8. 0646000 6460 1 Hydraulic Tank Asy.9. 0655000 6550 1 *Governor (Not Used with new Pump)


KIT4291 Hydraulic Completeing KitItem Part No. Part No. Qty Description

New # Old #KIT4291 4291 -- Hydraulic Completing Kit, w/ Following Items

1. 0057500 575 1 Hose Asy, 1/2" X 90"3. 0494000 4940 1 Hose, 1" ID (approx 7" Long)4. 0335700 3357 1 Pump Bracket5. 0419500 4195 1 Jackshaft

NOTE: This is NOT the Hydraulic Kit, it is a Hydraulic Completing Kit and is used with the HydraulicKit to complete required Parts.



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0496400 4964 1 Hose Asy, 1/2" X 102"2. 0302500 3025 2 Hose Asy, 1/4" X 48"3. 0494000 4940 1 Hose, 1" ID (approx 10" Long)4. 0169900 1699 1 *Pump (replaced by New Pump 02973292)


5. 0148600 1486 1 Key6. 0223500 2235 1 Flexible Coupling Asy.7. 0429400 4294 1 Pulley Adapter Asy.8. 0646000 6460 1 Hydraulic Tank Asy.9. 0655000 6550 1 *Governor (Not Used with new Pump)




1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0302400 3024 1 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 8" Long)4. 0299400 2994 1 Spring5. 0441400 4414 1 Spring Bracket6. 0655000 6550 1 Governor



HYDRAULIC KITS

KIT4797 Hydraulic Kit (Hyd. & Sub-Frame Kit)Item Part No. Part No. Qty Description


1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0021700 217 1 Hose Asy, 1/2" X 20"3. 0282900 2829 2 Hose Asy, 1/2" X 48"4. 0020700 207 1 Hose Asy, 3/4" X 78"5. 0302500 3025 1 Hose Asy, 1/4" X 48"6. 0368900 3689 1 Sub-Frame7. 0112400 1124 1 Stop Pin8. 0114600 1146 1 Hair Pin, f/ Stop Pin9. 0469400 4694 1 Spacer10. 0563900 5639 1 Spacer11. 0564000 5640 1 Spacer12. 0564800 5648 1 Spacer13. 0403600 4036 1 Valve, w/ Handle & Linkage14. 0632000 6320 1 Valve, Cessna Valve15. 0460500 4605 2 Bent Lever16. 0461200 4612 2 Connecting Link17. 0186200 1162 1 Valve Lever Pin18. 0586700 5867 1 Valve Bracket



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0110800 1108 1 Hose Asy, 1/2" X 78"3. 0302400 3024 1 Hose Asy, 1/4" X 42"4. 0302500 3025 1 Hose Asy, 1/4" X 48"5. 0494000 4940 1 Hose, 1" ID (approx 7" Long)6. 0169900 1699 1 * Pump (replaced by New Pump 02973291)

02973291 ------- 1 Pump (0.840 CID) (new Pump)02973295 ------- 1 Drawing, Pump Instructions (f/ new Pump)

7. 0415300 4153 1 Jackshaft8. 0415500 4155 1 Pump Bracket9. 0148600 1486 1 Key10. 0429600 4296 1 Pulley Adapter11. 0415600 4156 1 Tank Bracket12. 0646000 6460 1 Hydraulic Tank Asy.13. 0655000 6550 1 *Governor (Not used w/ New Pump #02973291)


Components / Parts


HYDRAULIC KITSComponents / PartsKIT4858 Hydraulic Kit (Hyd. & Sub-Frame Kit)


1. 0022000 220 4 Hose Asy, 1/2" X 66"2. 0021700 217 1 Hose Asy, 1/2" X 20"3. 0099800 998 1 Hose Asy, 1/2" X 14-1/2"4. 0343500 3435 1 Hose Asy, 1/4" X 60"5. 0403600 4036 1 Valve, w/ Handle & Linkage6. 0632000 6320 1 Valve, Cessna Valve7. 0460500 4605 2 Bent Lever8. 0461200 4612 2 Connecting Link9. 0186200 1162 1 Valve Lever Pin



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0302400 3024 2 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 8" Long)4. 0655000 6550 1 Governor





6. 0322900 3229 1 Pump Bracket8. 0537100 5371 1 Pulley Adapter9. 0560500 5605 1 Jackshaft10. 0646000 6460 1 Hydraulic Tank Asy.11. 0561400 5614 1 Stud12. 0655000 6550 1 *Governor (Not Used with new Pump)




HYDRAULIC KITS





6. 0148600 1486 1 Key7. 0165100 1651 1 Pump Plate8. 0194900 1949 1 Pump Bracket9. 0561000 5610 1 Flex Coupling10. 0566900 5969 1 Spacer11. 0646000 6460 1 Hydraulic Tank Asy.12. 0655000 6550 1 *Governor (Not Used with new Pump)


Components / PartsKIT5458 Hydraulic Kit


1. 0288000 2880 1 Hose Asy, 1/2" X 18"2. 0302500 3025 2 Hose Asy, 1/4" X 48"3. 0454400 4544 1 Hose Asy, 1/2" X 42"4. 0494000 4940 1 Hose, 1" ID (approx 8" Long)5. 0655000 6550 1 Governor



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0300700 3435 1 Hose Asy, N/A" X N/A" (Obsolete)3. 0301000 3010 1 Hose Asy. 1/2" X 41"4. 0291100 2911 1 Hose Asy, 3/4" X 30"5. 0343500 3435 1 Hose Asy, 1/4" X 60"6. 0300800 3008 1 Tube Elbow, Long7. 0494000 4940 1 Hose, 1" ID (approx 5" Long)8. 0199200 1992 1 Selector Valve9. 0300600 3006 1 Spacer10. 0436000 4360 1 Valve Bracket11. 0655000 6550 1 Governor





1. 0190600 1806 2 Hose Asy, 1/2" X 72"2. 0343500 3435 1 Hose Asy, 1/4" X 60"3. 0202800 2028 1 Hose Asy, 3/4" X 24"4. 0151300 1513 1 Hose Asy, 1/4" X 54"5. 0494000 4940 1 Hose, 1" ID (approx 5" Long)6. 0655000 6550 1 Governor



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0114800 1148 2 Hose Asy, 1/4" X 36"3. 0494000 4940 1 Hose, 1" ID (approx 7" Long)4. 0180600 1806 1 Hose Asy, 1/2" X 72"5. 0169900 1699 1 *Pump (replaced by New Pump 02973292)


6. 0148600 1486 1 Key7. 0331700 3317 1 Transition Plate8. 0415100 4151 1 Pulley Adapter9. 0415300 4153 1 Jackshaft10. 0646000 6460 1 Hydraulic Tank Asy.11. 0415600 4156 1 Tank Bracket12. 0655000 6550 1 *Governor (Not Used with new Pump)




1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0302400 3024 2 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 12" Long)4. 0631600 6316 1 Hose Asy, 1/2" X 90"5. 0646000 6460 1 Hydraulic Tank Asy.6. 0655000 6550 1 Governor






1. 0180600 1806 2 Hose Asy, 1/2" X 72"2. 0282800 2828 1 Hose Asy, 3/4" X 48"3. 0291000 2910 2 Hose Asy, 3/4" X 60"4. 0202800 2028 1 Hose Asy, 3/4" X 24"5. 0343500 3435 2 Hose Asy, 1/4" X 60"6. 0494000 4940 1 Hose, 1" ID (approx 2" Long)7. 0655000 6550 1 Governor8. 0199200 1992 1 Selector Valve



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0151400 1514 1 Hose Asy, 1/2" X 84"3. 0180600 1806 1 Hose Asy, 1/2" X 72"4. 0302400 3024 2 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 2" Long)6. 0655000 6550 1 Governor7. 0375500 3755 1 Check Valve8. 651312 ------ 2 Coupler Half QD Connectors, Inner Half



1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2. 0110800 1108 1 Hose Asy, 1/2" X 78"3. 0114800 1148 2 Hose Asy, 1/4" X 36"4. 0494000 4940 1 Hose, 1" ID (approx 9" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)

02973292 ------- 1 Pump (1.020 CID) (new Pump)02973295 ------- 1 Drawing, Pump Instructions (for new Pump)

6. 0331700 3317 1 Transition Plate7. 0454300 4543 1 Shaft8. 0487400 4874 1 Pulley Adapter Asy.9. 0646000 6460 1 Hydraulic Tank Asy.10. 0455300 4553 1 Tank Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)



HYDRAULIC KITS



1. 0021700 217 2 Hose Asy, 1/2" X 20"2. 0040400 404 2 Hose Asy, 1/2" X 60"3. 0283000 2830 1 Hose Asy, 1/2" X 36"4. 0302400 3024 2 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 3" Long)6. 0617700 6177 1 Hose Asy, 3/4" X 42"7. 0655000 6550 1 Governor

Components / Parts



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0151400 1514 1 Hose Asy, 1/2" X 84"3. 0302400 3024 2 Hose Asy, 1/4" X 42"4. 0494000 4940 1 Hose, 1" ID (approx 8" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


6. 0331700 3317 1 Transition Plate7. 0589500 5895 1 Pump Driveshaft Asy.8. 0574300 5743 1 Pulley Adapter Asy.9. 0646000 6460 1 Hydraulic Tank Asy.10. 0588900 5889 1 Tank Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)









HYDRAULIC KITS



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0040700 407 1 Hose Asy, 1/2" X 24"3. 0264500 2645 1 Hose Asy, 3/4" X 30"4. 0264600 2646 1 Hose Asy, 3/4" X 45"5. 0302400 3024 2 Hose Asy, 1/4" X 42"6. 0494000 4940 1 Hose, 1" ID (approx 5" Long)7. 0655000 6550 1 Governor8. 0199200 1992 1 Selector Valve





6. 0561000 5610 1 Flexible Coupler7. 0590100 5901 1 Pump Drive Shaft Asy.8. 0148600 1486 1 Key9. 0646000 6460 1 Hydraulic Tank Asy.10. 0590400 5904 1 Tank & Pump Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)



New # Old #6. 0331700 3317 1 Transition Plate7. 0589700 5897 1 Pump Drive Shaft Asy.8. 0487400 4874 1 Pulley Adapter Asy.9. 0646000 6460 1 Hydraulic Tank Asy.10. 0591700 5917 1 Tank Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts






6. 0610300 6103 1 Pump Bracket7. 0610400 6104 1 Pump Driveshaft8. 0611400 6114 1 Coupling Insert9. 0611500 6115 1 Coupling10. 0611600 6116 1 Coupling11. 0148600 1486 1 Key12. 0646000 6460 1 Hydraulic Tank Asy.13. 0610200 6102 1 Tank Bracket14. 0655000 6550 1 * Governor (Not Used w/ New Pump)






6. 0574300 5743 1 Pulley Adapter Asy.7. 0613200 6132 1 Pump Driveshaft8. 0613300 6133 1 Transition Plate9. 061340A 6134A 1 Plate10. 061340B 6134B 2 Spacer11. 0646000 6460 1 Hydraulic Tank Asy.12. 0655000 6550 1 * Governor (Not Used w/ New Pump)




HYDRAULIC KITS



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0040700 407 1 Hose Asy, 1/2" X 24"3. 0264500 2645 2 Hose Asy, 3/4" X 30"4. 0302400 3024 2 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 4" Long)6. 0655000 6550 1 Governor7. 0199200 1992 1 Selector Valve



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0300400 3004 1 Hose Asy, 3/4" X 18"3. 0264600 2646 1 Hose Asy, 3/4" X 45"4. 0302400 3024 1 Hose Asy, 1/4" X 42"5. 0302500 3025 1 Hose Asy, 1/4" X 486 0683500 6835 1 Hose, 1" X 45"7. 0494000 4940 1 Hose, 1" ID (approx 2" Long)8. 0655000 6550 1 Governor9. 0199200 1992 1 Selector Valve





6. 0462300 4623 1 Shaft7. 0462200 4622 1 Jackshaft, 2-3/4" Long8. 0462100 4621 1 Universal Joint9. 0616200 6162 1 Universal Joint Asy.10. 0245100 2451 1 Key, Square (1-3/4" Long)11. 0148600 1486 1 Key, Square (1" Long)12. 0646000 6460 1 Hydraulic Tank Asy.13. 0616100 6161 1 Tank Bracket14. 0655000 6550 1 * Governor (Not Used w/ New Pump)





1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0302400 3024 2 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 8" Long)4. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


5. 0626500 6265 1 Pump Bracket6. 0462300 4623 1 Shaft7. 0462200 4622 1 Jackshaft, 2-3/4" Long8. 0462100 4621 1 Universal Joint9. 0616600 6166 1 Universal Joint Asy.10. 0245100 2451 1 Key, Square (1-3/4" Long)11. 0148600 1486 1 Key, Square (1" Long)12. 0626400 6264 1 Pulley Adapter13. 0646000 6460 1 Hydraulic Tank Asy.14. 0626800 6268 1 Tank Bracket15. 0655000 6550 1 * Governor (Not Used w/ New Pump)




1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0458100 4581 1 Hose Asy, 3/4" X 36"3. 0302400 3024 2 Hose Asy, 1/4" X 42"4. 0494000 4940 1 Hose, 1" ID (approx 6" Long)5. 0655000 6550 1 Governor

KIT6304 Hydraulic Kit


1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0057500 575 1 Hose Asy, 1/2" X 90"3. 0302500 3025 2 Hose Asy, 1/4" X 48"4. 0494000 4940 1 Hose 1" ID (approx 8" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)










7. 0639500 6395 1 Pump Bracket8. 0463200 4632 1 Shaft9. 0462100 4621 1 Universal Joint10. 0616600 6166 1 Universal Joint Asy.11. 000052 ------- 1 Key, Woodruff Key12. 0245100 2451 1 Key, Square Key13. 0639400 6394 1 Pulley Adapter14. 0646000 6460 1 Hydraulic Tank Asy.15. 0415600 4156 1 Tank Bracket16. 0655000 6550 1 * Governor (Not Used w/ New Pump)


KIT6304 Hydraulic Kit (Continued from Previos Page)Item Part No. Part No. Qty Description

New # Old #6. 0627900 6279 1 Pulley Adapter Asy.7. 0148600 1486 1 Key8. 0225300 2253 1 Flexible Coupling9. 0419500 4195 1 Jackshaft10. 0646000 6460 1 Hydraulic Tank Asy.11. 0630500 6305 1 Pump & Tank Mounting Bracket12. 0655000 6550 1 * Governor (Not Used w/ New Pump)




1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0302500 3025 2 Hose Asy, 1/4" X 48"3. 0494000 4940 1 Hose, 1" ID (approx 6" Long)4. 0169900 1699 1 * Pump (replaced by New Pump 02973292)




HYDRAULIC KITS


New # Old #5. 06403 6403 1 Pump Bracket6. 045690A 4569A 1 Pump Shaft7. 0148600 1486 1 Key8. 0429600 4296 1 Pulley Adapter9. 0646000 6460 1 Hydraulic Tank Asy.10. 0643000 6430 1 Tank Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts



1. 0110800 1108 3 Hose Asy, 1/2" X 78"2. 0343500 3435 2 Hose Asy, 1/4" X 60"3. 0300400 3004 1 Hose, 3/4" X 18"4. 0151400 1514 1 Hose Asy, 1/2" X 84"5. 0375500 3755 1 Check Valve6. 0655000 6550 1 Governor



1. 0021700 217 1 Hose Asy, 1/2" X 20"2. 0040400 404 1 Hose Asy, 1/2" X 60"3. 0040700 407 1 Hose Asy, 1/2" X 24"4. 0180600 1806 2 Hose Asy, 1/2" X 72"5. 0282900 2829 1 Hose Asy, 1/2" X 48"6. 0302500 3025 1 Hose Asy, 1/4" X 48"7. 0302400 3024 1 Hose Asy, 1/4" X 42"8. 0403600 4036 1 Valve, w/ Handle & Linkage9. 0632000 6320 1 Valve, Cessna Valve10. 0186200 1862 1 Valve Lever Pin11. 0460500 4605 2 Bent Lever12. 0461200 4612 2 Connecting Link



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0057500 575 1 Hose Asy, 1/2" X 90"3. 0302400 3024 2 Hose Asy, 1/4" X 42"




HYDRAULIC KITS



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0302400 3024 2 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 7" Long)4. 0151400 1514 1 Hose Asy, 1/2" X 84"5. 0646000 6460 1 Hydraulic Tank Asy.6. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


7. 045430A 4543A 1 Pump Shaft8 0148600 1486 1 Key9. 0649000 6490 1 Pulley Adapter10. 0655000 6550 1 * Governor (Not Used w/ New Pump)




1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0282900 2829 1 Hose Asy, 1/2" X 48"3. 0454400 4544 1 Hose Asy, 1/2" X 42"4. 0300400 3004 1 Hose Asy, 3/4" X 18"5. 0302400 3024 2 Hose Asy, 1/4" X 42"6. 0655000 6550 1 Governor

Components / PartsKIT6459 Hydraulic Kit (Continued From Previous Page)


4. 0494000 4940 1 Hose, 1" ID (approx 9" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


6. 0645800 6458 1 Pump Driveshaft Asy.7. 0613300 6133 1 Transition Plate8. 061340A 6134A 1 Plate9. 061340B 6134B 2 Spacer10. 0574300 5743 1 Pulley Adapter Asy.11. 0646000 6460 1 Hydraulic Tank Asy.12. 0655000 6550 1 * Governor (Not Used w/ New Pump)






1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0454400 4544 1 Hose Asy, 1/2" X 42"3. 0114800 1148 2 Hose Asy, 1/4" X 36"4. 0494000 4940 1 Hose, 1" ID (approx 7" Long)5. 0679000 6790 1 Pump, PTO Pump6. 0646000 6460 1 Hydraulic Tank Asy.7. 0652900 6529 1 Torque Arm8. 0655000 6550 1 Governor





6. 0045430A 4543A 1 Pump Shaft7. 0223500 2235 1 Flexible Coupling Asy.8. 0650900 6509 1 Pulley Adapter Asy.9. 0148600 1486 1 Key10. 0646000 6460 1 Hydraulic Tank Asy.11. 0568300 5683 1 Tank Mounting Bracket12. 0651000 6510 1 Tank Bracket13. 0655000 6550 1 * Governor (Not Used w/ New Pump)




1. 0110800 1108 1 Hose Asy, 1/2" X 78"2. 0021700 217 1 Hose Asy, 1/2" X 20"3. 0022000 220 2 Hose Asy, 1/2" X 66"4. 0282900 2829 2 Hose Asy, 1/2" X 48"5. 0302500 3025 2 Hose Asy, 1/4" X 48"6. 0403600 4036 1 Valve w/ Handle & Linkage7. 0460500 4605 2 Bent Lever8. 0186200 1862 1 Valve Lever Pin9. 0461200 4612 2 Connecting Link10. 0632000 6320 1 Valve, Cessna Valve



HYDRAULIC KITS



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0496400 4964 1 hose Asy, 1/2" X 102"3. 0114800 1148 2 Hose Asy, 1/4" X 36"4. 0494000 4940 1 Hose, 1" ID (approx 8" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


6. 0223500 2235 1 Flexible Coupler7. 0658100 6581 1 Pump Shaft8. 0148600 1486 1 Key9. 0646000 6460 1 Hydraulic Tank Asy.10. 0616100 6161 1 Pump & Tank Mounting Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)




1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0151400 1514 1 hose Asy, 1/2" X 84"3. 0302400 3024 2 Hose Asy, 1/4" X 42"4. 0494000 4940 1 Hose, 1" ID (approx 7" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


6. 0223500 2235 1 Flexible Coupler7. 0653900 6539 1 Pulley Adapter Asy.8. 0654000 6540 1 Pump Shaft9. 0654100 6541 1 Pump Support10. 0148600 1486 1 Key11. 0646000 6460 1 Hydraulic Tank Asy.12. 0616100 6161 1 Tank Bracket13. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0302400 3024 2 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 8" Long)



HYDRAULIC KITS


New # Old #4. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


5. 0659000 6590 1 Pump & Battery Support6. 0659100 6591 1 Universal Shaft7. 0659200 6592 1 Tie Bolt8. 0646000 6460 1 Hydraulic Tank Asy.9. 0626800 6268 1 Tank Bracket10. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts





6. 0664200 6642 1 Pump Bracket7. 0664300 6643 1 Shaft Universal8. 0664400 6644 4 Spacer9. 0646000 6460 1 Hydraulic Tank Asy.10. 0659400 6594 1 Tank Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)


KIT6607 Hydraulic Kit


KIT6607 6607 -- Hydraulic Kit Asy, w/ Following Items1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0057500 575 1 Hose Asy, 1/2" X 90"3. 0114800 1148 2 Hose Asy, 1/4" X 36"4. 0494000 4940 1 Hose, 1" ID (approx 7" Long)5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)





HYDRAULIC KITS



1. 0099800 998 1 Hose Asy, 1/2" X 14-1/2"2. 0021700 217 1 Hose Asy, 1/2" X 20"3. 0022000 220 1 Hose Asy, 1/2" X 66"4. 0180600 1806 2 Hose Asy, 1/2" X 72"5. 0343500 3435 2 Hose Asy, 1/4" X 60"6. 0653500 6535 1 Hose Asy, Size N/A (Obsolete)7. 0403600 4036 1 Valve w/ Handle & Linkage8. 0460500 4605 2 Bent Lever9. 0186200 1862 1 Valve Lever Pin10. 0461200 4612 2 Connecting Link11. 0632000 6320 1 Valve, Cessna Valve



1. 0040400 404 2 Hose Asy, 1/2" X 60"2. 0496400 4964 1 Hose Asy, 1/2" X 102"3. 0114800 1148 2 Hose Asy, 1/4" X 36"4. 0494000 4940 1 Hose, 1" ID (approx 16" Long)5. 0679000 6790 1 Pump (PTO Mounted)6. 0660400 6604 1 Torque Arm7. 0646000 6460 1 Hydraulic Tank Asy.8. 0660100 6601 1 Tank Bracket9. 0655000 6550 1 Governor

Components / PartsKIT6607 Hydraulic Kit (Continued From Previous Page)


6. 0660000 6600 1 Pump Bracket6. 0561000 5610 1 Flexible Coupling7. 0660200 6602 1 Pump Driveshaft8. 0148600 1486 1 Key9. 0646000 6460 1 Hydraulic Tank Asy.10. 0660100 6601 1 Tank Bracket11. 0655000 6550 1 * Governor (Not Used w/ New Pump)



HYDRAULIC KITSKIT6620 Hydraulic Kit


1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2. 0114800 1148 2 Hose Asy, 1/4" X 36"3. 0494000 4940 1 Hose, 1" ID (approx 6" Long)4. 0151400 1514 1 Hose Asy, 1/2" X 84"5. 0646000 6460 1 Hydraulic Tank Asy.6 0662100 6621 1 Tank Bracket7. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


8. 0148600 1486 1 Key9. 0662000 6620 1 Pump Shaft10. 0656500 6565 1 Pump Bracket11. 701573 ------- 1 Front Coupler Asy12. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0302400 3024 2 Hose Asy, 1/4" X 42"3. 0494000 4940 1 Hose, 1" ID (approx 7" Long)4. 0655000 6550 1 Governor





6. 0656500 6565 1 Pump Bracket7. 0662000 6620 1 Pump Shaft8. 701573 ------- 1 Front Coupling Asy.9. 0646000 6460 1 Hydraulic Tank Asy.10. 0662100 6621 1 Tank Bracket11. 0149600 1486 1 Key12. 0655000 6550 1 *Governor (Not used w/ New Pump #02973291)




HYDRAULIC KITS



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0040400 404 1 Hose Asy, 1/2" X 60"3. 0151300 1513 2 Hose Asy, 1/4" X 54"4. 0302500 3025 1 Hose Asy, 1/4" X 48"5. 0494000 4940 1 Hose, 1" ID (approx 8" Long)6. 0682100 6821 1 Cable, Push/Pull, Flexible7. 0669400 6694 1 Lever Bracket8. 0672700 6727 1 Lever Bracket Support9. 0669600 6696 3 Terminal, Spool end10. 0669700 6697 3 Terminal, Lever End11. 0669800 6698 3 Pin12. 0105500 1055 3 Cotter Pin13. 0655000 6550 1 Governor



1. 0057500 575 1 Hose Asy, 1/2" X 90"2. 0180600 1806 2 Hose asy, 1/2" X 72"3. 0114800 1148 1 Hose Asy, 1/4" X 36"4. 0302400 3024` 1 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 10" Long)6. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


7. 0429400 4294 1 Pulley Adapter Asy8. 0148600 1486 1 Key9. 0419500 4195 1 Jackshaft10. 0335700 3357 1 Pump Bracket11. 0223500 2235 1 Flexible Coupling Asy12. 0646000 6460 1 Hydraulic Tank Asy.13. 0665000 6650 1 Control Valve, 3 Spool14. 0669400 6694 1 Lever Bracket15. 0671400 6714 1 Support Block16. 0672200 6722 1 Support Lever Bracket17. 0669600 6696 3 Terminal, Spool End18. 0669700 6697 3 Terminal, Lever End19. 0669800 6698 3 Pin20. 0685100 6851 3 Flexible Cable, 56" Long



HYDRAULIC KITS



1. 0180600 1806 1 Hose Asy, 1/2" X 72"2. 0318500 3185 1 Hose asy, 1/2" X 96"3. 0114800 1148 1 Hose Asy, 1/4" X 36"4. 0302400 3024 1 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 11" Long)6. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


7. 0336600 3366 1 Pump Bracket8. 0148600 1486 1 Key9. 0419500 4195 1 Jackshaft10. 0223500 2235 1 Flexible Coupling Asy11. 0429400 4294 1 Pulley Adapter Asy.12. 0665000 6650 1 Control Valve, 3 Spool13. 0669400 6694 1 Lever Bracket14. 0669600 6696 3 Terminal, Spool End15. 0669700 6697 3 Terminal, Lever End16. 0669800 6698 3 Pin17. 06710000 6710 1 Bearing Hanger18. 0671400 6714 1 Support Block19. 0672200 6722 1 Support Lever Bracket20. 0685100 6851 3 Flexible Cable, 59" Long21. 0646000 6460 1 Hydraulic Tank Asy.22. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts



1. 0599600 5996 2 Hose Asy, 1/2" X 54"2. 0114800 1148 2 Hose Asy, 1/4" X 36"3. 0494000 4940 1 Hose, 1" ID (approx 3" Long)4. 0646000 6460 1 Hydraulic Tank Asy.5. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


6. 0148600 1486 1 Key7. 0429400 4294 1 Pulley Adapter Asy.8. 0223500 2235 1 Flexible Coupling Asy.9. 0655000 6550 1 * Governor (Not Used w/ New Pump)








7. 0148600 1486 1 Key8. 0561000 5610 1 Flex Coupling9. 0675500 6755 1 Pump Driveshaft10. 0646000 6460 1 Hydraulic Tank Asy.11. 0675400 6754 1 Pump & Tank Mounting Bracket12. 0655000 6550 1 * Governor (Not Used w/ New Pump)




1. 0022000 220 4 Hose Asy, 1/2" X 66"2. 0151400 1514 1 Hose Asy, 1/2" X 84"3. 0318500 3185 1 Hose Asy, 1/2" X 96"4. 0302400 3024 4 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 14" Long)6. 02973293 ------ 1 Pump, Tandem Gear, 0.930 CID7. 0456100 4561 1 Pulley Adapter8. 0679900 6799 1 Driveshaft9. 0657500 6575 1 Flex Coupling10. 0680100 6801 1 Pump Bracket11. 0668100 6681 1 Bumper12. 0668700 6687 1 Front Brace13. 0668800 6688 1 Rear Brace14. 0656100 6561 1 Hydraulic Tank Asy. Twin Mowers 3.2 Gal



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0180600 1806 4 Hose Asy, 1/2" X 72"3. 0151300 1513 2 Hose Asy, 1/4" X 54"4. 0343500 3435 2 Hose Asy, 1/4" X 60"



HYDRAULIC KITS





7. 0223500 2235 1 Flexible Coupling8. 0683000 6830 1 Pump Shaft9. 02959993 ------ 1 Bushing10. 02959992 ------ 1 Coupling, Splined (17 Spline & 20 Spline)11. 02959991 ------ 1 Bushing12. 0646000 6460 1 Hydraulic Tank Asy13. 0670300 6703 1 Pump & Tank Mounting Bracket14. 0670400 6704 4 Spacer15. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts

KIT6809 Hydraulic Kit (Continued from Previous Page)Item Part No. Part No. Qty Description

New # Old #5. 0494000 4940 1 Hose, 1" ID (approx 14" Long)6. 02973293 ------ 1 Pump, Tandem Gear, 0.930 CID7. 0456100 4561 1 Pulley Adapter8. 0656400 6564 1 Jackshaft, Splined9. 0657500 6575 1 Flex Coupling10. 0148600 1486 1 Key11. 0680100 6801 1 Pump Bracket12. 0669400 6694 2 Lever Bracket13. 0672700 6727 1 Lever Bracket Support, RH14 0679500 6795 1 Lever Bracket Support, LH15. 0669600 6696 6 Terminal, Spool End16. 0669700 6697 6 Terminal, Lever End17. 0669800 6698 6 Pin18. 0682100 6821 6 Cable, Flexible Push/Pull, 50" Long19. 0668100 6681 1 Bumper20. 0668700 6687 1 Front Brace21. 0668800 6688 1 Rear Brace22. 0656100 6561 1 Hydraulic Tank Asy. Twin Mowers 3.2 Gal





1. 0033100 331 2 Hose Asy, 1/2" X 52-1/2"2. 0114800 1148 2 Hose Asy, 1/4" X 36"3. 0494000 4940 1 Hose, 1" ID (approx 6" Long)4. 0151400 1514 1 Hose Asy, 1/2" X 84"5. 0646000 6460 1 Hydraulic Tank Asy.6 0662100 6621 1 Tank Bracket7. 0169900 1699 1 * Pump (replaced by New Pump 02973291)


8. 0148600 1486 1 Key8. 0684600 6846 1 Pump Shaft9. 0656500 6565 1 Pump Bracket11. 0684500 6845 1 Adapter Plate10 701485 ------- 1 Front Coupler Asy12. 0655000 6550 1 * Governor (Not Used w/ New Pump)




1. 0318500 3185 1 Hose Asy, 1/2" X 96"2. 0114800 1148 1 Hose Asy, 1/4" X 36"3. 0302400 3024 1 Hose Asy, 1/4" X 42"4. 0494000 4940 1 Hose, 1" ID (approx 12" Long)5. 0679000 6790 1 Pump, PTO Pump6. 0646000 6460 1 Hydraulic Tank Asy.7 0686800 6868 1 Tank Bracket8. 0679200 6792 1 Torque Arm Kit9. 0655000 6550 1 Governor



1. 0180600 1806 2 Hose Asy, 1/2" X 72"2. 0318500 3185 1 Hose Asy, 1/2" X 96"3. 0302500 3025 1 Hose Asy, 1/4" X 48"4. 0302400 3024 1 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 14" Long)6. 0679000 6790 1 Pump, PTO Pump7. 0646000 6460 1 Hydraulic Tank Asy.8. 0679200 6792 1 Torque Arm Kit


HYDRAULIC KITS



1. 0318500 3185 1 Hose Asy, 1/2" X 96"2. 0180600 1806 2 Hose Asy, 1/2" X 72"3. 0564600 5646 2 Hose Asy, 1/4" X 66"4. 0745300 7453 1 Hose Asy, 1/4" X 81"5. 0494000 4940 1 Hose, 1" ID (approx 9" Long)6. 0691600 6916 1 Hose Support7. 0169900 1699 1 * Pump (replaced by New Pump 02973291)


8. 0690800 6908 1 Pump Shaft9. 0223500 2235 1 Flexible Coupling10. 0429400 4294 1 Pulley Adapter Asy.11. 0745500 7455 1 Plate, Pulley Adapter12. 0148600 1486 1 Key13. 0646000 6460 1 Hydraulic Tank Asy.14. 0670300 6703 1 Pump & Tank Mounting Bracket15. 0655000 6550 1 * Governor (Not Used w/ New Pump)






4. 0574300 5743 1 Pulley Adapter Asy.7. 0613300 6133 1 Transition Plate8 061340A 6134A 1 Plate9. 061340B 6134B 2 Spacer10. 0686200 6862 1 Pump Driveshaft Asy.11. 0646000 6460 1 Hydraulic Tank Asy.

Components / Parts



1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0302500 3025 2 Hose Asy, 1/4" X 48"3. 0494000 4940 1 Hose, 1" ID (approx 14" Long)4. 0646000 6460 1 Hydraulic Tank Asy.5 0659400 6594 1 Tank Bracket







1. 0040400 404 4 Hose Asy, 1/2" X 60"2. 0151400 1514 1 Hose Asy, 1/2" X 84"3. 0302400 3024 2 Hose Asy, 1/4" X 42"4. 0655000 6550 1 Governor


New # Old #6. 0679000 6790 1 Pump (PTO Mounted)7. 0691200 6912 1 Universal Torque Arm Kit8. 0655000 6550 1 Governor





7. 0616600 6166 1 Universal Joint Asy.8. 0697100 6971 1 Pulley Adpater9. 0695000 6950 1 Pump Bracket10. 0695100 6951 2 Battery Support Riser11. 0697300 6973 1 Jackshaft Asy.12. 0646000 6460 1 Hydraulic Tank Asy.13. 0655000 6550 1 * Governor (Not Used w/ New Pump)






6. 0700300 7003 1 Pulley Adapter



HYDRAULIC KITS



1. 0040700 407 1 Hose Asy, 1/2" X 24"2. 0180600 1806 4 Hose Asy, 1/2" X 72"3. 0318500 3185 1 Hose Asy, 1/2" X 96"4. 0114800 1148 1 Hose Asy, 1/4" X 36"5. 0494000 4940 1 Hose, 1" ID (approx 10" Long)6. 0679000 6790 1 Pump (PTO Pump)7. 0646000 6460 1 Hydraulic Tank Asy.8. 0707200 7072 1 Tank Support, LH9. 0707300 7073 1 Tank Support, RH10. 0182600 1826 1 Valve Lever Pin11. 02963166 ------- 1 Cordura Sleeving, 100" Long12. 0304700 3047 1 Motor Valve, w/ Handle & Linkage13. 0460500 4605 2 Bent Lever14. 0461200 4612 2 Connecting Link15. 0655000 6550 1 Governor16. 0655200 6552 1 Relief Valve17. 0655300 6553 1 Lift Valve



1. 0040700 407 1 Hose Asy, 1/2" X 24"2. 0318500 3185 2 Hose Asy, 1/2" X 96"3. 0302400 3024 2 Hose Asy, 1/4" X 42"4. 0655000 6550 1 Governor5. 0672000 6720 1 Control Valve Asy


New # Old #7. 0223500 2235 1 Flexible Coupling Asy.8. 02702900 ------- 1 Hub9. 0699300 6993 1 Pump Shaft Asy.10. 0669600 6696 3 Terminal, Spool End11. 0669700 6697 3 Terminal, Lever End12. 0669800 6698 3 Pin13. 0685100 6851 3 Flexible Cable, 56" Long14 0699100 6991 1 Valve Stand Weldment15. 0699200 6992 1 Lever Bracket Weldment16. 0646000 6460 1 Hydraulic Tank Asy.17. 0700000 7000 1 Tank Mounting Weldment18. 0655000 6550 1 * Governor (Not Used w/ New Pump)


Components / Parts






1. 0040700 407 1 Hose Asy, 1/2" X 24"2. 0057500 575 2 Hose Asy, 1/2" X 90"3. 0496400 3185 1 Hose Asy, 1/2" X 102"4. 0114800 1148 2 Hose Asy, 1/4" X 36"5. 0494000 4940 1 Hose, 1" ID (approx 12" Long)6. 0679000 6790 1 Pump (PTO Pump)7. 0646000 6460 1 Hydraulic Tank Asy.8. 0704800 7048 1 Tank Support Weldment9. 0707500 7075 1 Tank Support Holder10. 0182600 1826 1 Valve Lever Pin11. 02963166 ------- 1 Cordura Sleeving, 100" Long12. 0304700 3047 1 Motor Valve, w/ Handle & Linkage13. 0460500 4605 2 Bent Lever14. 0461200 4612 2 Connecting Link15. 0655000 6550 1 Governor16. 0655200 6552 1 Relief Valve17. 0655300 6553 1 Lift Valve



1. 0180600 1806 4 Hose Asy, 1/2" X 72"2. 0318500 3185 1 Hose Asy, 1/2" X 96"3. 0496400 4964 1 Hose Asy, 1/2" X 102"4. 0494000 4940 1 Hose, 1" ID (approx 17" Long)5. 0709300 7093 2 Hose Support6. 02973293 ------ 1 Pump, Tandem Gear, 0.930 CID7. 0456100 4561 1 Pulley Adapter8. 0709100 7091 1 Pump Shaft9. 02963166 ------ 1 Cordura Sleeving, 100" Long10. 0656100 6561 1 Hydraulic Tank Asy. Twin Mowers 3.2 Gal



1. 0318500 3185 1 Hose Asy, 1/2" X 96"2. 0599600 5996 2 Hose Asy, 1/2" X 54"3. 0114800 1148 1 Hose Asy, 1/4" X 36"4. 0302400 3024 1 Hose Asy, 1/4" X 42"5. 0494000 4940 1 Hose, 1" ID (approx 11" Long)6. 0712400 7124 1 Pump, Reverse Rotation Only7. 0712000 7120 1 Pump Support8. 0712500 7125 1 Coupling Asy.9. 0646000 6460 1 Hydraulic Tank Asy.10. 0709800 7098 1 Tank Support Weldment


HYDRAULIC KITS



1. 0180600 1806 2 Hose Asy, 1/2" X 72"2. 0318500 3185 1 Hose Asy, 1/2" X 96"3. 0302400 3024 1 Hose Asy, 1/4" X 42"4. 0302500 3025 1 Hose Asy, 1/4" X 48"5. 0494000 4940 1 Hose, 1" ID (approx 16" Long)6. 0679000 6790 1 Pump, PTO Mounted7. 0691200 6912 1 Universal Torque Arm Kit8. 0646000 6460 1 Hydraulic Tank Asy.9. 0655000 6550 1 Governor





6. 0713200 7132 1 Pump Mounting7. 0223500 2235 1 Flexible Coupling Asy.8. 0429400 4294 1 Pulley Adapter Asy.9. 0712800 7128 1 Pump Shaft10. 0669600 6696 3 Terminal, Spool End11. 0669700 6697 3 Terminal, Lever End12. 0669800 6698 3 Pin13. 0685100 6851 3 Flexible Cable, 56" Long14. 0148600 1486 1 Key15. 0713600 7136 1 Valve Stand Weldment16. 0713800 7138 1 Lever Bracket Weldment17. 0646000 6460 1 Hydraulic Tank Asy.18. 0702700 7027 1 Tank Bracket19. 0655000 6550 1 * Governor (Not Used w/ New Pump)






1. 0022000 220 2 Hose Asy, 1/2" X 66"2. 0496400 4964 1 Hose Asy, 1/2" X 102"3. 0114800 1148 2 Hose Asy, 1/4" X 36"5. 0494000 4940 1 Hose, 1" ID (approx 12" Long)6. 0679000 6790 1 Pump, PTO Mounted7. 0646000 6460 1 Hydraulic Tank Asy.8. 0704800 7048 1 Tank Support Weldment9. 0707500 7075 1 Tank Support Holder10. 0655000 6550 1 Governor



1. 0022000 220 3 Hose Asy, 1/2" X 66"2. 0180600 1806 1 Hose Asy, 1/2" X 72"3. 0318200 3182 2 Hose Asy, 1/4" X 72"4. 0564600 5646 1 Hose Asy, 1/4" X 66"5. 0494000 4940 1 Hose, 1" ID (approx 7" Long)6. 0703200 7032 1 Hose Support7. 0169900 1699 1 * Pump (replaced by New Pump 02973292)


8. 0742500 7425 1 Pump Mount Weldment9. 0223500 2235 1 Flexible Coupling Asy.10. 0743600 7436 1 Pump Drive Adapter11. 0743700 7437 1 Chain Asy.12. 0757500 7575 1 Sprocket13. 0757800 7578 1 Master Link, Chain14. 0742700 7427 1 Pump Shaft, 27-1/2" Long15. 0669400 6694 1 Lever Bracket16. 0669600 6696 3 Terminal, Spool End17. 0669700 6697 3 Terminal, Lever End18. 0669800 6698 3 Pin19. 0745100 7451 3 Flexible Cable, 74" Long20. 0148600 1486 1 Key, Square Key21. 000052 ------- 1 Key, Woodruff Key22. 0744900 7449 1 Valve Post Weldment, RH23. 0746600 7466 1 Valve bracket Weldment, RH24. 0743800 7438 4 Spacer, Battery Plate25. 0646000 6460 1 Hydraulic Tank Asy.26. 0743300 7433 1 Tank Support weldment27. 0655000 6550 1 * Governor (Not Used w/ New Pump)





1. 0022000 220 4 Hose Asy, 1/2" X 66"2. 0057500 575 1 Hose Asy, 1/2" X 90"3. 0496400 4964 1 Hose Asy, 1/2" X 102"4. 0302500 3025 4 Hose Asy, 1/4" X 48"5. 0745300 7453 2 Hose Asy, 1/4" X 81"6. 0494000 4940 1 Hose, 1" ID (approx 20" Long)7. 0752400 7524 1 Hose Support8. 02973293 ------ 1 Pump, Tandem Gear, 0.930 CID9. 0561200 5612 4 Spacer10. 0749600 7496 1 Pulley Adapter11. 0750300 7503 1 Driveshaft12. 0752500 7525 1 Flex Coupling13. 0668500 6685 1 Pump Bracket14. 0668100 6681 1 Bumper15. 0668700 6687 1 Front Brace16. 0668800 6688 1 Rear Brace17. 0656100 6561 1 Hydraulic Tank Asy. Twin Mowers 3.2 Gal



1. 0022000 220 4 Hose Asy, 1/2" X 66"2. 0180600 1806 2 Hose Asy, 1/2" X 72"3. 0302500 3025 4 Hose Asy, 1/4" X 48"4. 0745300 7453 2 Hose Asy, 1/4" X 81"5. 0494000 4940 1 Hose, 1" ID (approx 17" Long)6. 0752400 7524 1 Hose Support7. 02973293 ------ 1 Pump, Tandem Gear, 0.930 CID8. 0561200 5612 4 Spacer9. 0752200 7522 1 Pulley Adapter10. 0752500 7525 1 Flex Coupling11. 0751700 7517 1 Driveshaft12. 0720500 7205 1 Flexible Cable, 68" Long13. 0668500 6685 1 Pump Bracket14. 0669400 6694 2 Lever Bracket15. 0669600 6696 6 Terminal, Spool End16. 0669700 6697 6 Terminal, Lever End17. 0669800 6698 6 Pin18. 0749700 7497 1 Lever Bracket Weldment, RH19. 0752000 7520 1 Lever Bracket Weldment, LH20. 0668100 6681 1 Bumper21. 0668700 6687 1 Front Brace22. 0668800 6688 1 Rear Brace23. 0656100 6561 1 Hydraulic Tank Asy. Twin Mowers 3.2 Gal

Hydro Clipper Mnt Kit Archive Book 10/02Printed U.S.A.

Mount Kit Reference ArchiveHydro Clipper

Book No. 02979558

2002 Edition

mount kit reference book archive book mount kits€¦ · check all tractor information and all...

Documents