mounting towerchron qe1 / qe2 - amazon web … qe2...page 1 remove the main unit from the backplate....
TRANSCRIPT
Page 1
Remove the main unit from the backplate. 1, Follow steps 3, 4, & 5. 2, Mount the backplate securely to a surface using at least two of the fixing
holes provided. 3, Ensure the power is isolated and connect wiring to the relevant terminals
(See user instructions). 4, Locate the top mounting lugs (image 7/B) into the top mount locations on
the QE1/QE2 (image 7/A). 5, Lower the base of the QE1/QE2 until the fixing screw is fully located in the
mounting slot (image 8). 6, Tighten the fixing screw fully (image 9). 7, Turn on power and setup the QE1/QE2 according to requirement.
Page 1
Mounting Towerchron QE1 / QE2
Page 2
1
3
2
4
5
Loosen Fixing Screw
Lift away from backplate
Page 3
6 7
8
9
Tighten Fixing Screw