move order process
TRANSCRIPT
-
7/29/2019 Move Order Process
1/7
Defining Employees
Jennifer has performed some setups in the Vision instance to create her demo. She has identified
two material planners from the Office Smart Naperville plant OSN. They are Steven Hall andSimon Buckner. She defines these two individuals as employees using the Human Resources
responsibility.
Defining Steven Hall and Simon Buckner as users
This is more of a system administration task but Jennifer needs to carry it out because it is amandatory step in her demo. Jennifer defines these two individuals as users in her Visioninstance and assigns their respective employee names in the Employee field. She then assigns the
Inventory responsibility to each of them.
Defining Item Planners
Jennifer then decides to add Simon Buckner as an item planner using the Inventory
Responsibility. It is not necessary to associate the name of an item planner with an employee
defined in HR. However, the advantage of doing so is distinct in that the employee can receivenotifications through Oracle Workflow whenever there is a Move Order (or any other document
that has an approval workflow) awaiting his review/approval. This is the approach that Jenniferintends to demonstrate.
-
7/29/2019 Move Order Process
2/7
Jennifer has defined an item called the Linear Hub in the Vision org M1. She then proceeds to
assigning Simon Buckner as the planner for this item.
Time to request a material transfer
Steven Hall is in need of the item LH101. He knows that he has to raise a move order to request
this material from its planner. So, he logs into apps as shown below.
When creating the Move Order he has to select the Transaction Type as Move Order
Transfer. The Move Order Type defaults as Requisition as shown below.
-
7/29/2019 Move Order Process
3/7
At the move order line level, there are four tabs:
Item
Project and Task
Source
Destination Control
Since Office Smart Naperville is not a project enabled organization therefore, the Projects andTasks tab is of no relevance to Steve.
In the Item tab, he specifies the item code, quantity needed to be transferred, the unit of measure
and the required date. Steve wants 20 units of LH101.
In the Source tab Steve needs to specify the source subinventory from which the material will be
drawn. However, he is not sure as to which subinventory has adequate on-hand balance of the
item LH101. So he uses the On Hand button to call the Material Workbench. He finds thatStores is the only subinventory in the M1 organization that has the item LH101.
There is a stock of 100 units of LH101. Steve needs 20. So he selects the Stores subinventory as
the source subinventory.
In the Destination tab, Steve selects the Floorstocksubinventory as the final location where the
material needs to be transferred.
Initiating the Move Order Approval Process
Finally, Steve clicks on the Approve button to launch the approval process. The Move Ordergoes into Pending Approval status as seen below.
-
7/29/2019 Move Order Process
4/7
At this point Steven Hall logs out and waits for further action on his move order.
Now, Simon Buckner logs in.
Upon logging in, Simon is greeted with a notification from Steven Hall that says Line 1 of MoveOrder 2060426, requires your Approval.
-
7/29/2019 Move Order Process
5/7
Simon clicks on the Subject line link to open the notification.
The notification essentially contains a summary of the move order with the following fouroptions for action:
Approve
Reject
Reassign
Request Information
Simon clicks on the Approve button to signal his consent for the transaction. Upon doing so, the
notification disappears from Simons Worklist.
In the real world, at this point Simon may choose to call Steve and communicate to him theapproval of the move order. However, this is optional as Steve will come to know of this the
moment he logs in.
Transacting the Move Order
-
7/29/2019 Move Order Process
6/7
Steven Hall logs in again. He finds that Simon has approved his Move Order.
A Point to Ponder
Why do two lines of notifications appear for the same move order?
It is because a move order may comprise multiple lines with varyingitem, required date, source and destination subinventory combinations.
If the lines have items that are assigned to different material plannersthen material planner A may get a notification to approve Line 1 while
material planner B would get a notification to approve Line 2, and so on.
Similarly the creator of the Move Order would get a notification for each line that gets actioned,such as an approval for Line 1 and rejection for Line 2.
If Steve queries the Move Order at this point, he will find that the status has changed to
Approved.
So, Steve can move onto the Transact Move Orders form. In this form, Steve chooses to
allocate or reserve his 20 units of LH101. To do so, he clicks on the Allocate button. Having
done so, he may decide that he needs only 18 units, instead of the need for 20 units that he had
anticipated earlier. He uses the View/Update Allocations feature to change the Quantity from20 to 18. Accordingly, the system adjusts the Allocated Qty to 18. The Requested Quantity
however retains the original figure of 20.
-
7/29/2019 Move Order Process
7/7
To enable his material handlers to physically move the material, Steve has to give them someinstructions. So, he launches the Move Order Pick Slip program by selecting the Print Pickslip
option from the Tools menu.
For a larger screenshot, clickhere.
Steves pick slip shows that 18 units of item LH101 are pending movement from the Stores
subinventory to Floorstock subinventory. This information tells the material handler he needs tophysically move these parts. The pick slip also shows that 2 units of LH101 remain Unallocated.
Steve clicks on the Transact button to transact the move order.
This results in 20 units of LH101 being deducted from the on-hand balance in the Stores
subinventory and the same quantity added to the Floorstock subinventory.
The Material Workbench will prove that this material transfer has indeed taken place.
This completes Jennifers demo.
http://beta.d.thelinkup.com/default.aspx?fldr=2008070116&fl=Requisition+Move+Ord.bmp&vfl=Requisition+Move+Ord.bmp&disposition=attachmenthttp://beta.d.thelinkup.com/default.aspx?fldr=2008070116&fl=Requisition+Move+Ord.bmp&vfl=Requisition+Move+Ord.bmp&disposition=attachmenthttp://beta.d.thelinkup.com/default.aspx?fldr=2008070116&fl=Requisition+Move+Ord.bmp&vfl=Requisition+Move+Ord.bmp&disposition=attachmenthttp://beta.d.thelinkup.com/default.aspx?fldr=2008070116&fl=Requisition+Move+Ord.bmp&vfl=Requisition+Move+Ord.bmp&disposition=attachment