mower conditioner...9. 093366 important - store manual here 10. 093367 warning - owner’s...

2175Mower

Conditioner

SERVICE PARTS MANUAL

Form No.906693

IntroductionWhen ordering service parts, specify the correct partnumber, full description, quantity required, the unitmodel number and serial number.

The Mower Conditioner model and serial number is ona plate located on the left side of the Swing Frame at theSteering Post Pivot. ”Right” and ”left” are determinedfrom a position standing behind the Mower Condition-er. From this position, the Drawbar and Positioner areon the ”left” side.

GEHL Company reserves the right to make changesor improvements in the design or construction of anypart of the unit without incurring the obligation to installsuch changes on any previously delivered units.

NOTE: On original tire replacement, companypolicy prohibits the sale of replacement tires for allGEHL machinery. Replacement Wheel Sets areavailable and tire size information is called out withthe Wheel Sets to facilitate replacement tire selec-tion. ALL REPLACEMENT TIRES MUST BEPURCHASED LOCALLY.

Refer to the abbreviations table located on this page forthe various fastener descriptions. Standard attachinghardware torque values are also provided on the insideback cover.

In the exploded view parts list, Reference Numbers mayhave additional information following the ReferenceNumber. A number in parentheses such as (4), willindicate a quantity of how many times that ReferenceNumber is used in that location. A Tear Drop symbolwill indicate an application of a “wet” product such asoil, and the number inside the Tear Drop will correspondto the description in the Parts List. Also, a numberinside of a hexagon will be the torque value required, infoot pounds, on the associated Reference Number.Items shown in the parts list that do not have ReferenceNumbers are shown for reference purposes only and areNOT available for purchase.

Unless otherwise specified, all Cap Screws or Bolts areGrade 5, cadmium or zinc plated; Hexagon Nuts forGrade 5 Screws or Bolts are Grade B; Hexagon Nuts forother Screws or Bolts are Grade A.

NOTE: The following abbreviations may usedherein:ASSD – AssembledASSY – AssemblyCB – Carriage BoltCCW – CounterclockwiseCP – Cotter PinCS – Cap Screw (Hexagon Head)CTR – CenterCW – ClockwiseDEG – DegreeDIA – DiameterFCS – Flanged Cap ScrewFHMS – Flat Head Machine ScrewFL – FlangedFLN – Flanged Lock Nut (Hexagon)FLS – Flanged Lock Screw (Hexagon)FW – Flat WasherGA – GaugeGR – GradeHD – Hard or HeadHN – Hex NutINCL – IncludesJT – JointLG – LargeLH – Left HandLW – Lock WasherLN – Lock NutLW – Lock WasherM – MetricMM/mm – MillimeterNF – National FinePB – Plow BoltPTO – Power Take OffRH – Right HandRPM – Revolutions Per MinuteRT – RightSERR – SerratedSHCS – Socket Head Cap ScrewSN – Serial Number or Slotted NutSQ – SquareT – Tooth or TeethTFS – Thread Forming ScrewTHMS – Truss Head Machine ScrewTHRD – ThreadWLDMT – Weldment# – Number() – (Quantity Used Here)

– Torque Required in foot pounds

– Indicates a Fluid Application

Printed in U.S.A. 1 906693/AP993

TABLE OF CONTENTSIntroduction Inside Front Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table of Contents 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Decal Locations 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tongue 4–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trailer Frame, Leg & Pusharm 6–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pusharm & Hydraulics 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wheel Assembly 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Forming Chamber 10–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Header Frame & Conditioner Rollers 12–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conditioner (Left Side) 14–15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conditioner (Right Side) 16–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pitman & Wobble Arm Drive 18–19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reel Variable Drive 20–21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reel 22–23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sickle & Guards 24–25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Components 26–29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tower–to–Gearbox PTO 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tower–to–Tractor PTO 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hitchjack 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gear Box 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Options & Accessories 30–32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Tongue Positioner 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical Tongue Positioner 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transport Light Kit 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cutterbar Wearplate Kit 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tall Crop Divider Kit 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Center Skid Shoe Kit 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Tow Chain (10 Ton) 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Numerical Index 34–36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Hardware Torque specifications Inside Back Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching Hardware Table Inside Back Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

906693/AP993 2 Printed in U.S.A.

DECAL LOCATIONSGENERAL INFORMATIONDecal Locations information is provided to assist in theproper selection and application of new decals, in theevent the original decal(s) become(s) damaged or themachine is repainted. Refer to the listing for theillustration reference number, part number, descriptionand quantity of each decal provided in the Kit. Referto the appropriate illustration(s) for replacementlocation(s).

NOTE: Refer to the SAFETY Chapter of theOperator’s Manual for the specific informationprovided on all of the various Safety Decalsfurnished in the Decal Kit(s).To insure proper selection for correct replacementdecal(s), compare all of the various close-up locationphotographs to your machine BEFORE starting torefinish the unit. Then, circle each pictured decal(applicable to your machine) while checking-off its partnumber in the listing. After you have verified all thedecals needed for replacement, set aside unneededdecals for disposal.

NEW DECAL APPLICATIONSurfaces MUST be free from dirt, dust, grease and otherforeign material before applying the new decal. Toapply a solid-formed decal, remove the smaller portionof the decal backing paper and apply this part of theexposed adhesive backing to the clean surface whilemaintaining proper position and alignment. Slowly peeloff the other portion of the backing paper while applyinghand pressure to smooth-out the decal surface.

CAUTIONALWAYS observe Safety Rules shown onDecals. If Decals become damaged, or if theunit is repainted, replace the Decals. Ifrepainting, BE SURE that ALL Decals from theKit(s) which apply to your machine, areaffixed to your unit.

PAINT NOTICEUse this list to order paint for refinishing:906315 One Gal. AG Red906324 One Qt. Light Grey906316 6 (12 oz. Spray Cans) AG Red906325 6 (12 oz. Spray Cans) Light Grey

The Decal Set Number for the MC2175 is 126970. TheSet includes the following:Ref. PartNo. Number Description & Quantity

1. 060510 Jack Storage Position2. 060511 Jack Lift Position3. 067493 Red Reflector Stripe (2 Places)4. 075749 Drive Line Dimensions5. 082666 Do NOT Lift on Pushbar6. 091444 DANGER – Rotating Component

(2 Places)7. 093020 Lubrication Symbol8. 093365 WARNING – Close or Replace Guard

(2 Places)9. 093366 IMPORTANT - Store Manual Here

10. 093367 WARNING - Owner’s Responsibility & Read Manual

11. 093373 WARNING - General Safety12. 093381 WARNING - Use Drawbar Transport Lock13. 093466 WARNING – 540 RPM Operation ONLY14. 093643 DANGER – Stay Clear of Header

(3 Places)15. 093653 WARNING – Rotating Drive Line16. 094913 GEHL 3-1/4” (3 Places)17. 094914 GEHL 5”18. 112389 2175 (2 Places)19. 112390 Decal – Colorbar (2 Places)20. 115974 WARNING – Install Transport Locks

(2 Places)

NOTE: Order Part Number 126757 for 10 ft rollof replacement Striping


Front Master

2 10

7

6

191811

l7

161

4

5

6

14

13

15

6

2

411

15

1819

1

16

6

5

l7 8

14

20

14

12

3

16

14 14

20 20

1619

18 8

9

3

10

13

13


�

�

�

�

�

�

�

�

�

�

��

��

��

��

MC2175 – TONGUE


Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.

01 330–33269 GUARD/TIRE 1. . . . . . . . . . . . . . . . . . . . . . .

076589 FLS 3/8X1 2. . . . . . . . . . . . . . . . . . . . . . . . .

070856 NUT/HEX FLANGE SERR LOCK 3/8 2. .

076590 FLS 1/2X1 2. . . . . . . . . . . . . . . . . . . . . . . . .

081374 NUT/HEX FLANGE SERR LOCK 1/2 2. .

02 097775 DRAWBAR/ASSY 1. . . . . . . . . . . . . . . . . . . .

03 220–32514 PIN/WLDMT 1. . . . . . . . . . . . . . . . . . . . . . . . .

650650 CS 1/2X3–1/2 (LN) 1. . . . . . . . . . . . . . . . . .

04 097859 CLAMP 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

072330 SCREW/SELF TAPPING 7. . . . . . . . . . . . .

05 125421 HOSE/ASSY (230″) 1. . . . . . . . . . . . . . . . . .

06 088841a JACK/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . . .

07 087756 PLATE/HITCH ASSY LOWER 1. . . . . . . . . .

08 087758 PLATE/HITCH TOP 1. . . . . . . . . . . . . . . . . .

650710 CS 5/8X2–1/4 (L) 4. . . . . . . . . . . . . . . . . . .

09 059743 HUB/JACK (WELD–ON) 2. . . . . . . . . . . . . .

10 126375 SHIELD/DRIVELINE (INCL 11) 1. . . . . . . . .

061685 CB 3/8X1–3/4 (N,L,LN,2P) 3. . . . . . . . . . .

11 126342 FLAP 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 124484 FLANGETTE 2. . . . . . . . . . . . . . . . . . . . . . . .

650704 CB 3/8X1 (N,L) 3. . . . . . . . . . . . . . . . . . . . .

13 520092 BEARING/BALL 1. . . . . . . . . . . . . . . . . . . . .

14 520093 LOCK/COLLAR 1. . . . . . . . . . . . . . . . . . . . . .

15 803098b CHAIN/SAFETY (OPTIONAL) 1. . . . . . . . . .

a) For breakdown, see Components page titled Hitchjack.b) For breakdown, see Options and Accessories pages.

MC2175 – TONGUE


MC2175 – TRAILER FRAME, LEG & PUSHARM



01 220–32516 PIN/PUSH ARM PIVOT 1. . . . . . . . . . . . . . .

650495 CS 1/2X1–1/4 (N,L) 1. . . . . . . . . . . . . . . . .

02 097772 FRAME/TRAILER ASSY 1. . . . . . . . . . . . . .

03 030–17662 CS 3/4X10 (N,2P) 2. . . . . . . . . . . . . . . . . . . .

04 360–32500 SPACER 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

05 045–31407 BUSHING 2. . . . . . . . . . . . . . . . . . . . . . . . . .

06 360–32499 SPACER 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

07 330–33279 DEFLECTOR/THIRD LINK 1. . . . . . . . . . . .

650533 CS 3/8X1–1/2 (N,L,P) 2. . . . . . . . . . . . . . . .

08 200–32506 LINK/THIRD 1. . . . . . . . . . . . . . . . . . . . . . . . .

570021 FITTING/GREASE 2. . . . . . . . . . . . . . . . . .

650709 CS 3/4X4 (N,L,P) 2. . . . . . . . . . . . . . . . . . .

09 250–32506 YOKE/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . .

10 380–32350 SPRING/FLOTATION ASSY 2. . . . . . . . . . .

11 200–32507 PIVOT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 030–31904 U–BOLT 3/4 (2N) 1. . . . . . . . . . . . . . . . . . . .

13 081377 FLS 3/8X1–1/4 1. . . . . . . . . . . . . . . . . . . . . . .

14 220–32517 PIN\SPRING PIVOT 1. . . . . . . . . . . . . . . . . .

570014 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

18 240–32043 ARM/PUSH ASSY LT 1. . . . . . . . . . . . . . . . .

570014 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

19 070856 NUT/HEX LG FL SERR LOCK 3/8 1. . . .

20 045–31406 BUSHING 2. . . . . . . . . . . . . . . . . . . . . . . . . .

21 117085b CYLINDER/HYDRAULIC ASSY 1. . . . . . . .

22 082620a LEG/ASSY RT 1. . . . . . . . . . . . . . . . . . . . . . .

082623 LEG/ASSY LT 1. . . . . . . . . . . . . . . . . . . . . . .

23 220–32520 PIN/LOWER 2. . . . . . . . . . . . . . . . . . . . . . . .

650577 CS 5/16X1–1/2 (LN) 4. . . . . . . . . . . . . . . . .

24 200–32504 LINK/TRANSPORT 2. . . . . . . . . . . . . . . . . . .

651123 CS 5/8X1 (L) 2. . . . . . . . . . . . . . . . . . . . . . .

25 400–21904 WASHER/SPECIAL AR. . . . . . . . . . . . . . . . .

26 480–27676 WASHER/SPECIAL 2. . . . . . . . . . . . . . . . . .

27 200–32505 CONNECTOR 2. . . . . . . . . . . . . . . . . . . . . . .

28 380–32342 SPRING/DOUBLE TORSION 2. . . . . . . . . .

29 040–33325 LIFT/FLEXIBLE ASSY 2. . . . . . . . . . . . . . . .

30 220–32515 PIN/WHEEL ASSY 2. . . . . . . . . . . . . . . . . . .

650491 CS 3/8X1–1/4 (LN,P) 2. . . . . . . . . . . . . . . .

570002 FITTING/GREASE 2. . . . . . . . . . . . . . . . . .

31 220–32519 PIN/UPPER 2. . . . . . . . . . . . . . . . . . . . . . . . .

650577 CS 5/16X1–1/2 (LN) 2. . . . . . . . . . . . . . . . .

32 082621 SPINDLE (WELD–IN) 2. . . . . . . . . . . . . . . . .

33 385–27865 PLUG/SPRING 2. . . . . . . . . . . . . . . . . . . . . .

34 480–42349 PIN/PIVOT LH 1. . . . . . . . . . . . . . . . . . . . . . .

35 049038 LATCH 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36 111377 DOOR/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . .

061872 SCREW/HEX WASHER HD 2. . . . . . . . . .

37 125882 SPACER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

38 125883 SCREW/SPECIAL 1. . . . . . . . . . . . . . . . . . .

570014 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

39 124667 MOUNT/SMV BRACKET 1. . . . . . . . . . . . . .

650545 CS 5/16X1–1/4 (N,L,6P) 2. . . . . . . . . . . . .

40 047269 SOCKET/SIGN MOUNTING 1. . . . . . . . . . .

650969 CS 5/16X5/8 (LN) 2. . . . . . . . . . . . . . . . . . .

a) Not illustrated.b) For Seal Kit, order 093110.

MC2175 – TRAILER FRAME, LEG & PUSHARM



01 030–17662 CS 3/4X10 (N,2P) 1. . . . . . . . . . . . . . . . . . . .

02 117086a CYLINDER/HYDRAULIC ASSY 1. . . . . . . .

03 380–32351b SPRING/FLOTATION ASSY RT 1. . . . . . . .

04 117927 ARM/PUSH ASSY RT 1. . . . . . . . . . . . . . . .

570019 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

(AFTER SN25199)

240–32029 ARM/PUSH ASSY RT 1. . . . . . . . . . . . . . . .

570019 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

(BEFORE SN25200)

06 480–27676 WASHER/SPECIAL 2. . . . . . . . . . . . . . . . . .

07 310–32513 SCREW/SPECIAL (5/8 L) 2. . . . . . . . . . . . .

570014 FITTING/GREASE 2. . . . . . . . . . . . . . . . . .

08 220–32518 PIN/PIVOT RT 1. . . . . . . . . . . . . . . . . . . . . . .

655018 PIN/COTTER 3/16X1–1/4 2. . . . . . . . . . . .


10 097859 CLAMP 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

072330 SCREW/SELF TAPPING 3. . . . . . . . . . . . .

11 124128 HOSE/ASSY (137″) 1. . . . . . . . . . . . . . . . . .

12 420–33066 GROMMET 2. . . . . . . . . . . . . . . . . . . . . . . . .

13 117085a CYLINDER/HYDRAULIC ASSY 1. . . . . . . .

14 125421 HOSE/ASSY (230″) 1. . . . . . . . . . . . . . . . . .

a) For Seal Kit order 093110.b) For replacement parts order 385–27865 Top Plug, 380–32350

Spring & 385–27867 Bottom Plug.

MC2175 – PUSHARM & HYDRAULICS


��

�

�

��

�

�

�

�

��

��

�

��

��

��

��

�


01 082623 LEG/ASSY LT (SHOWN) 1. . . . . . . . . . . . . .

082620 LEG/ASSY RT (NOT SHOWN) 1. . . . . . . . .

02 079716 SEAL/GREASE 2. . . . . . . . . . . . . . . . . . . . . .

03 042163 CONE/WHEEL BEARING 2. . . . . . . . . . . . .

04 091870 HUB/WHEEL ASSEMBLY (INCL 11–14) 2.

05 520201 CONE/BEARING 2. . . . . . . . . . . . . . . . . . . .

06 066717 WASHER/SPINDLE 2. . . . . . . . . . . . . . . . . .

07 653102 NUT/SLOTTED 7/8 NF 2. . . . . . . . . . . . . . . .

08 655010 PIN/COTTER 1/8X1-1/2 2. . . . . . . . . . . . . . .

09 076586 CAP/GREASE 2. . . . . . . . . . . . . . . . . . . . . . .

10 GREASE/GUN 242 LITHIUM AR. . . . . . . . .

11 042162 CUP/WHEEL BEARING 2. . . . . . . . . . . . . . .

12 046000 BOLT/WHEEL 12. . . . . . . . . . . . . . . . . . . . . .

13 046001 NUT/WHEEL 12. . . . . . . . . . . . . . . . . . . . . . .

14 520054 CUP/BEARING 2. . . . . . . . . . . . . . . . . . . . . .

15 126739 WHEEL/RIM (14 X 8KB DC) 2. . . . . . . . . . .

16 045582 VALVE/TIRE 2. . . . . . . . . . . . . . . . . . . . . . . .

17 082621 SPINDLE (WELD–IN) 2. . . . . . . . . . . . . . . . .

MC2175 – WHEEL ASSEMBLY


�

��

��

�

��

� �

�

��

��

��

��

��

��

�

�

��

��

MC2175 – FORMING CHAMBER



01 330–33262 FLUFFER/ASSY 1. . . . . . . . . . . . . . . . . . . . .

655018 PIN/COTTER 3/16X1–1/4 1. . . . . . . . . . . .

02 290–32461 CONTROL/FLUFFER ASSY 1. . . . . . . . . . .

655018 PIN/COTTER 3/16X1–1/4 1. . . . . . . . . . . .

400–32443 WASHER/SPECIAL 1. . . . . . . . . . . . . . . . .

03 290–32462 ROD/CONNECTING 3. . . . . . . . . . . . . . . . .

650553 PIN/COTTER 1/8X3/4 (3/8 P) 6. . . . . . . . .

04 420–30377 GROMMET/RUBBER 3. . . . . . . . . . . . . . . . .

05 390–32643 RETAINER 2. . . . . . . . . . . . . . . . . . . . . . . . . .

076588 FLS 3/8X3/4 (FLN) 4. . . . . . . . . . . . . . . . . .

070856 NUT/HEX LG FL SERR LOCK 3/8 4. . . . .

06 220–32513 PIN/ASSY (3/8 P) 1. . . . . . . . . . . . . . . . . . . .

07 380–32348 SPRING/COMPRESSION 1. . . . . . . . . . . . .

08 400–18916 WASHER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

09 220–18200 PIN/ROLL 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

10 090–32297 HANDLE/ASSY 1. . . . . . . . . . . . . . . . . . . . . .

11 076958 PIN/SPRING PLAIN 1. . . . . . . . . . . . . . . . . .

12 097598 PLATE/SIDE BACKING 2. . . . . . . . . . . . . . .

13 097599 PLATE/CENTER BACKING 1. . . . . . . . . . . .

072330 SCREW/SELF TAPPING 12. . . . . . . . . . . .

14 330–33259 COVER/ASSY 1. . . . . . . . . . . . . . . . . . . . . . .

15 092208 DIRECTOR/LEFT 1. . . . . . . . . . . . . . . . . . . .

650437 CB 5/16X5/8 (NILN,P) 2. . . . . . . . . . . . . . .

092207a DIRECTOR/RIGHT 1. . . . . . . . . . . . . . . . . . .

650437 CB 5/16X5/8 (NILN,P) 2. . . . . . . . . . . . . . .

16 092406 EDGING/DIRECTOR 2. . . . . . . . . . . . . . . . .

17 092204 SUPPORT/ASSY LT 1. . . . . . . . . . . . . . . . . .

650437 CB 5/16X5/8 4. . . . . . . . . . . . . . . . . . . . . . .

070856 NUT/HEX LG FL SERR LOCK 5/16 4. . . .

092201a SUPPORT/ASSY RT 1. . . . . . . . . . . . . . . . .

650437 CB 5/16X5/8 4. . . . . . . . . . . . . . . . . . . . . . .


18 097335 WINDROWER/LT 1. . . . . . . . . . . . . . . . . . . .

650437 CB 5/16X5/8 3. . . . . . . . . . . . . . . . . . . . . . .

651096 CB 5/16X1/2 6. . . . . . . . . . . . . . . . . . . . . . .


097334a WINDROWER/RT 1. . . . . . . . . . . . . . . . . . . .

650437 CB 5/16X5/8 3. . . . . . . . . . . . . . . . . . . . . . .

651096 CB 5/16X1/2 6. . . . . . . . . . . . . . . . . . . . . . .


19 390–32696 STIFFENER/VEIN 2. . . . . . . . . . . . . . . . . . . .

650949 THMS 5/16X3/4 (N,L,P) 6. . . . . . . . . . . . . .

20 045–31404 BUSHING OILITE 2. . . . . . . . . . . . . . . . . . . .

21 420–33903 EDGING 3. . . . . . . . . . . . . . . . . . . . . . . . . . . .

22 097772 FRAME/TRAILER 1. . . . . . . . . . . . . . . . . . . .

a) NOT Illustrated.

MC2175 – FORMING CHAMBER


�

�

�

�

�

��

��

��

��

��

��

��

��

��

��

�

�

��

�

��

��

�

��

��

�

�

MC2175 – HEADER FRAME & CONDITIONER ROLLERS



01 112905 SHIELD/ASSY RT 1. . . . . . . . . . . . . . . . . . . .

650687 CB 5/16X3/4 (N,L,P) 5. . . . . . . . . . . . . . . . .

02 290–32471 ROD/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . . .

03 420–30377 GROMMET/RUBBER (5/16 P) 1. . . . . . . . .

04 220–16199 PIN 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

05 112909 TOOL/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . .

06 330–33283 DEFLECTOR/ASSY 2. . . . . . . . . . . . . . . . . .

076588 FLS 3/8X3/4 (FLN) 4. . . . . . . . . . . . . . . . . .

07 126961 ROLL UPPER/LH SPIRAL 1. . . . . . . . . . . . .

08 126960 ROLL LOWER/RH SPIRAL 1. . . . . . . . . . . .

09 127158 SHIELD/TRANSMISSION ASSY 1. . . . . . .

650953 THMS 3/8X3/4 (N,L) 4. . . . . . . . . . . . . . . . .

10 610748 CATCH/KEEPER 2. . . . . . . . . . . . . . . . . . . .

11 078580 POUCH/MANUAL 1. . . . . . . . . . . . . . . . . . . .

12 068642 WASHER/SPECIAL 4. . . . . . . . . . . . . . . . . .

13 079923 RIVET/BLIND 4. . . . . . . . . . . . . . . . . . . . . . .

14 330–33297 SHIELD/BELT 1. . . . . . . . . . . . . . . . . . . . . . .

076588 FLS 3/8X3/4 5. . . . . . . . . . . . . . . . . . . . . . .


15 097827 SHOE/ROCK LT 1. . . . . . . . . . . . . . . . . . . . .

650834 CB 1/2X1–1/2 (N,L,1P) 3. . . . . . . . . . . . . .

16 420–34436 PLUG/HOLE 2. . . . . . . . . . . . . . . . . . . . . . . .

17 126958 PUSH BAR/ASSY 1. . . . . . . . . . . . . . . . . . . .

650453 CS 1/2X1–1/2 (N,L) 4. . . . . . . . . . . . . . . . .

18 390–32658 LATCH (P 5/16) 2. . . . . . . . . . . . . . . . . . . . . .

19 380–32348 SPRING/COMPRESSION (LN 5/16) 2. . . .

20 083397 SHIELD/END SICKLE 1. . . . . . . . . . . . . . . .

650490 CS 3/8X1 (NILN,P) 1. . . . . . . . . . . . . . . . . .

21 126922 HEADER/FRAME ASSY 1. . . . . . . . . . . . . .

22 420–34437 PAD/END PANEL 2. . . . . . . . . . . . . . . . . . . .

23 420–34447 EDGING 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

24 420–34438 PAD/TRANSMISSION 1. . . . . . . . . . . . . . . .

25 126957 PLATE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

650453 CS 1/2X1–1/2 (N,L) 4. . . . . . . . . . . . . . . . .

MC2175 – HEADER FRAME & CONDITIONER ROLLERS


��

��

�

�

�

�

�

�

�

�

�

�

�

��

MC2175 – CONDITIONER (LEFT SIDE)



01 089867 COLLAR/BEARING 1. . . . . . . . . . . . . . . . . .

02 010–32322 FLANGETTE 2. . . . . . . . . . . . . . . . . . . . . . . .

650495 CS 1/2X1–1/4 (L) 4. . . . . . . . . . . . . . . . . . .

03 089871 BEARING/BALL 1. . . . . . . . . . . . . . . . . . . . .

04 056640 RING/RETAINING 1. . . . . . . . . . . . . . . . . . .

05 044090 SPACER (.135) AR. . . . . . . . . . . . . . . . . . . . .

400–27079 WASHER (.090) AR. . . . . . . . . . . . . . . . . . . .

06 077601 RETAINER/BEARING 85MM 2. . . . . . . . . . .

650527 CB 1/2X1–1/4 (LN) 4. . . . . . . . . . . . . . . . . .

07 089872 BEARING/BALL 1. . . . . . . . . . . . . . . . . . . . .

08 520195 COLLAR/BEARING 1. . . . . . . . . . . . . . . . . .

09 480–27676 WASHER/SPECIAL 1. . . . . . . . . . . . . . . . . .

651104 CB 5/8X3–1/4 (LN,L) 1. . . . . . . . . . . . . . . .

10 112705 BUSHING 1. . . . . . . . . . . . . . . . . . . . . . . . . .

11 653029 NUT/HEX 3/4 2. . . . . . . . . . . . . . . . . . . . . . . .

12 126936 CS 3/4X5–1/2 GR8 1. . . . . . . . . . . . . . . . . . .

13 125766 ARM/ROLL ASSY LT 1. . . . . . . . . . . . . . . . .

14 380–32354 SPRING/ROLL ASSY (INCL 15) 1. . . . . . . .

15 385–27865 PLUG/SPRING 1. . . . . . . . . . . . . . . . . . . . . .

310–32513 CS 3/4X6 (N,P) 1. . . . . . . . . . . . . . . . . . . . .

MC2175 – CONDITIONER (LEFT SIDE)


��

�

�

�

��

�

��

��

�

��

�

�

��

�

�

�

�

�

�

�

�

�

��

��

��

�

��

��

��

��

��

��

��

��

��

�

��

��

MC2175 – CONDITIONER (RIGHT SIDE)



01 126939 SHIELD 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

650488 CS 3/8X3/4 (LN) 5. . . . . . . . . . . . . . . . . . . .

650790 CB 3/8X3/4 (LN) 1. . . . . . . . . . . . . . . . . . . .

650495 CS 1/2X1–1/4 (LN) 2. . . . . . . . . . . . . . . . . .

02 520195 COLLAR/LOCK 2. . . . . . . . . . . . . . . . . . . . . .

03 077601 RETAINER/BEARING 85MM 2. . . . . . . . . . .

650494 CS 1/2X1 (LN) 2. . . . . . . . . . . . . . . . . . . . . .

04 089872 BEARING/BALL 1. . . . . . . . . . . . . . . . . . . . .

05 126948 SPKT/80A17T 1. . . . . . . . . . . . . . . . . . . . . . .

06 115727a ELEMENT/LOCKING 1–3/4 SHAFT 1. . . . .

07 126951 CHAIN/ROLLER #80X62 1. . . . . . . . . . . . . .

08 126949 SPKT/80A17T 1. . . . . . . . . . . . . . . . . . . . . . .

09 057557 WASHER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

10 651277 CS 1/2X1–1/2 GR8 (L) 1. . . . . . . . . . . . . . . .

11 112705 BUSHING 1. . . . . . . . . . . . . . . . . . . . . . . . . .

12 480–27676 WASHER/SPECIAL 1. . . . . . . . . . . . . . . . . .

651104 CB 5/8X3–1/4 (LN,L) 1. . . . . . . . . . . . . . . .

13 380–32354 SPRING/ROLL ASSY (INCL 14) 1. . . . . . . .

14 385–27865 PLUG/SPRING 1. . . . . . . . . . . . . . . . . . . . . .

15 310–32515 CS 3/4X6 (N,P) 1. . . . . . . . . . . . . . . . . . . . . .

16 077601 RETAINER/BEARING 2. . . . . . . . . . . . . . . .

17 089872 BEARING/BALL 1. . . . . . . . . . . . . . . . . . . . .

18 125894 ARM/ROLL ASSY RT 1. . . . . . . . . . . . . . . . .

650527 CB 1/2X1–1/2 (LN) 4. . . . . . . . . . . . . . . . . .

19 6H154 WASHER/SHIM AR. . . . . . . . . . . . . . . . . . . . .

20 091918 SPROCKET/IDLER#80X12T 2. . . . . . . . . . .

21 650163 CS 3/4X1–3/4 (L) 2. . . . . . . . . . . . . . . . . . . . .

22 125899 ARM/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . . .

23 480–27676 WASHER/SPECIAL 1. . . . . . . . . . . . . . . . . .

24 310–32515 SCREW/SPECIAL (L 5/8) 1. . . . . . . . . . . . .

570014 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

25 076313 YOKE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26 655006 CP 1/8X1 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

27 126940 SPACER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

28 H786B SPRING 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

29 H6208 WASHER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

30 061937 CS 1/2X5–1/2 (N) 1. . . . . . . . . . . . . . . . . . . .

31 126936 CS 3/4X5–1/2 GR8 (2N) 1. . . . . . . . . . . . . . .

a) See inset for proper torquing sequence.

MC2175 – CONDITIONER (RIGHT SIDE)


��

�

�

�

�

�

�

��

��

��

��

�

�

�

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

�

�

��

MC2175 – PITMAN & WOBBLE ARM DRIVE



01 020–32214 V–BELT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

02 260–32252 PULLEY 3 GROOVE 7–3/4 OD 1. . . . . . . .

03 045–31395 SPLIT TAPER BUSHING 1. . . . . . . . . . . . . .

(INCLUDES SCREWS)

117936 CS 5/16X2 FULL THREAD (L) 3. . . . . . . .

650198 SHSS–SL 1/4X3/8 1. . . . . . . . . . . . . . . . . .

04 180–10909 KEY/SQ.HARD 1/4X2 1. . . . . . . . . . . . . . . . .

05 360–21711 SHIM AR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

06 090086a GEARBOX/ASSEMBLED 1. . . . . . . . . . . . .

650494 CS 1/2X1 (L) 4. . . . . . . . . . . . . . . . . . . . . . .

07 045–31417 BUSHING/PIVOT 1. . . . . . . . . . . . . . . . . . . .

651119 CS 3/4X10 (N,L,2P) 1. . . . . . . . . . . . . . . . .

6H 154 WASHER/SHIM AR. . . . . . . . . . . . . . . . . . .

08 240–32034 ARM/IDLER ASSY 1. . . . . . . . . . . . . . . . . . .

570014 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

09 220–21516 PIN 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

655006 PIN/COTTER 1/8X1 1. . . . . . . . . . . . . . . . .

10 250–19364 YOKE/ADJUSTING 1. . . . . . . . . . . . . . . . . .

11 290–32468 ROD/ADJUSTING (1/2N) 1. . . . . . . . . . . . . .

12 040–33350 ANCHOR/ASSY 1. . . . . . . . . . . . . . . . . . . . .

650494 CS 1/2X1 (L,P) 2. . . . . . . . . . . . . . . . . . . . .

13 360–32512 SPACER (2 1/2N,1P) 1. . . . . . . . . . . . . . . . .

14 380–25728 SPRING/COMPRESSION 1. . . . . . . . . . . . .

15 126341 SHIELD/DRIVELINE (INCL 20) 1. . . . . . . . .

656093 CS M8X16 (P) 4. . . . . . . . . . . . . . . . . . . . . .

16 126342 FLAP 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17 260–32253 PULLEY/PITMAN 1. . . . . . . . . . . . . . . . . . . .

18 260–25753 IDLER/FLAT BELT 1. . . . . . . . . . . . . . . . . . .

650886 CS 1/2X6–1/2 (N,L,P) 1. . . . . . . . . . . . . . . .

19 045–31396b ELEMENT/LOCKING SET 2. . . . . . . . . . . . .

20 360–32507 SPACER/LONG 1. . . . . . . . . . . . . . . . . . . . .

21 124472c FLANGE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

650491 CS 3/8X1–1/4 6. . . . . . . . . . . . . . . . . . . . . .

22 350–32475c RING/LOCKING 1. . . . . . . . . . . . . . . . . . . . .

23 126297 BEARING/ASSY 1. . . . . . . . . . . . . . . . . . . . .

24 520093 COLLAR 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

25 098235 ARM/PITMAN ASSY 1. . . . . . . . . . . . . . . . . .

26 390–16339 CLAMP/PITMAN 1. . . . . . . . . . . . . . . . . . . . .

651113 CS 7/16X1–3/4 (N) 1. . . . . . . . . . . . . . . . . .

27 200–32366 SOCKET/ASSY (LONG) 1. . . . . . . . . . . . . .

651239 CS 1/2X2–1/2 GR8 (P) 2. . . . . . . . . . . . . . .

210–19530 NUT/LOCK FLANGE 2. . . . . . . . . . . . . . . .

570014 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

28 122892 WASHER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

650490 CS 3/8X1 (L) 1. . . . . . . . . . . . . . . . . . . . . . .

29 126938 RETAINER 1. . . . . . . . . . . . . . . . . . . . . . . . . .

650533 CS 3/8X1–1/2 (L) 3. . . . . . . . . . . . . . . . . . .

30 240–32035 ARM/WOBBLE ASSY 1. . . . . . . . . . . . . . . . .

31 520205 BEARING/CUP 1. . . . . . . . . . . . . . . . . . . . . .

32 520206 BEARING/CONE 2. . . . . . . . . . . . . . . . . . . .

33 360–14855 WASHER/SPECIAL 3. . . . . . . . . . . . . . . . . .

34 360–32510 SHIM AR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

081377 FLS 3/8X1–1/4 (FLN) 2. . . . . . . . . . . . . . . .


35 126943 BUSHING/STEEL (PRESS IN FRAME) 2. .

36 126942 ANGLE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37 030–31908 WOBBLE ARM PIVOT BOLT 1. . . . . . . . . .

650933 NUT/SLOTTED 1” 1. . . . . . . . . . . . . . . . . .

655024 PIN/COTTER 3/16X2 1. . . . . . . . . . . . . . . .

38 360–32511 SHIM 1/16” AR. . . . . . . . . . . . . . . . . . . . . . . . .

360–32520 SHIM 1/32” AR. . . . . . . . . . . . . . . . . . . . . . . . .

39 200–32448 SOCKET/ASSY (SHORT) 1. . . . . . . . . . . . .

651240 CS 1/2X3 GR8 2. . . . . . . . . . . . . . . . . . . . .

210–19530 NUT/LOCK FLANGE 2. . . . . . . . . . . . . . . .

076002 FITTING/GREASE 1. . . . . . . . . . . . . . . . . .

a) For breakdown, see Components page titled Gearbox.b) For proper assembly procedure, see the Service chapter of

the Operator’s Manual.c) For proper torquing sequence, see the Service chapter of the

Operator’s Manual.

MC2175 – PITMAN & WOBBLE ARM DRIVE


�

�

��

�

�

�

�

�

�

� �

�

�

�

��

��

�

��

��

MC2175 – REEL VARIABLE DRIVE



01 027003 FLANGETTE 4. . . . . . . . . . . . . . . . . . . . . . . .

650704 CB 3/8X1 (N,L) 6. . . . . . . . . . . . . . . . . . . . .

02 520065 BEARING 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

03 520085 COLLAR/LOCK 2. . . . . . . . . . . . . . . . . . . . . .

04 320–32578 JACKSHAFT 1. . . . . . . . . . . . . . . . . . . . . . . .

05 220–19812 PIN 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

650553 PIN/COTTER 1/8X3/4 (P 5/16) 1. . . . . . . .

06 370–32113 SPROCKET/ASSY 50T 1. . . . . . . . . . . . . . .

07 098032 PULLEY/HALF 2. . . . . . . . . . . . . . . . . . . . . .

064422 FLS 3/8X1–1/2 4. . . . . . . . . . . . . . . . . . . . .

08 360–32505 SHIM 7/64″ 5. . . . . . . . . . . . . . . . . . . . . . . . .

09 010–32392 FLANGE/BEARING 1. . . . . . . . . . . . . . . . . .

650786 CB 3/8X1–1/4 (N,L,P) 3. . . . . . . . . . . . . . . .

10 520159 COLLAR/BEARING 1. . . . . . . . . . . . . . . . . .

11 370–32142 SPROCKET/11T 1. . . . . . . . . . . . . . . . . . . . .

650338 SHSS 1/4–20 2. . . . . . . . . . . . . . . . . . . . . .

12 500076 CHAIN/ROLLER #50X58 LINKS 1. . . . . . . .

13 004942 KEY 1/4X1 1. . . . . . . . . . . . . . . . . . . . . . . . . .

14 360–32506 SPACER/IDLER 1. . . . . . . . . . . . . . . . . . . . .

15 370–18061 SPROCKET/IDLER 1. . . . . . . . . . . . . . . . . .

651104 CB 5/8X3–1/4 (N,L 5/8, 2P 7/8) 1. . . . . . . .

MC2175 – REEL VARIABLE DRIVE


MC2175 – REEL



01 120–32773 REEL/WLDMT 1. . . . . . . . . . . . . . . . . . . . . . .

02 520085 COLLAR/LOCK 2. . . . . . . . . . . . . . . . . . . . . .

03 027003 FLANGETTE 4. . . . . . . . . . . . . . . . . . . . . . . .

650704 CB 3/8X1 (N,L) 3. . . . . . . . . . . . . . . . . . . . .

04 520065 BEARING 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

05 040–33351 MOUNT/BEARING RIGHT 1. . . . . . . . . . . .

650527 CB 1/2X1–1/4 (N,L,P) 3. . . . . . . . . . . . . . . .

06 390–32657 STRAP/ADJUSTING 1. . . . . . . . . . . . . . . . .

061930 CS 1/2X4 (N,L) 1. . . . . . . . . . . . . . . . . . . . .

07 260–32251 PULLEY 20″ DIA 1–1/4 BORE 1. . . . . . . . .

650243 SQHSS 1/2X1–1/4 (JN) 2. . . . . . . . . . . . . .

08 180–10909 KEY/1/4X1 1. . . . . . . . . . . . . . . . . . . . . . . . . .

09 020–32215 V–BELT (HC90) 1. . . . . . . . . . . . . . . . . . . . . .

10 380–14677 SPRING/EXTENSION 1. . . . . . . . . . . . . . . .

11 030–31888 BOLT/EYE (1) 3/8 P,2N 1. . . . . . . . . . . . . . .

12 048182 IDLER/FLAT BELT 1. . . . . . . . . . . . . . . . . . .

13 360–32513 SPACER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

14 240–32036 ARM/IDLER WLDMT 1. . . . . . . . . . . . . . . . .

650644 CS 1/2X3 (N,L) 1. . . . . . . . . . . . . . . . . . . . .

650821 CS 5/8X1 (L,P) 1. . . . . . . . . . . . . . . . . . . . .

15 200–32509 PIVOT/WLDMT 1. . . . . . . . . . . . . . . . . . . . . .

16 030–13498 ROD/END (2 3/8 L,P, 1 3/8 N–NF) 1. . . . . .

17 120–32774 CAM/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . . .

650527 CB 1/2X1–1/4 (N,L,P) 3. . . . . . . . . . . . . . . .

650786 CB 3/8X1–1/4 (N,L,P) 2. . . . . . . . . . . . . . . .

650860 CB 3/8X1–3/4 (N,L,2P) 1. . . . . . . . . . . . . .

18 126937 STRAP 12. . . . . . . . . . . . . . . . . . . . . . . . . . . .

19 650704 CB 3/8X1 (P) 24. . . . . . . . . . . . . . . . . . . . . . .

20 210–19533 FLN 3/8 24. . . . . . . . . . . . . . . . . . . . . . . . . .

21 110–32416 BAT/REEL 4. . . . . . . . . . . . . . . . . . . . . . . . . .

22 310–16296 CS 5/8X2–1/4 (N,L) 4. . . . . . . . . . . . . . . . . . .

23 076159 BEARING 4. . . . . . . . . . . . . . . . . . . . . . . . . . .


25 090796 BAR/TINE ASSY LONG 2. . . . . . . . . . . . . . .

651162 PIN/COTTER 5/16X2 4. . . . . . . . . . . . . . . .

090770 BAR/TINE ASSY SHORT 2. . . . . . . . . . . . .

650486 CS 5/16X3/4 (FLN,L,12P) 24. . . . . . . . . . .

26 125751 HOUSING/TINE BAR 12. . . . . . . . . . . . . . . .

27 010–32388 BEARING/PLASTIC 12. . . . . . . . . . . . . . . . .

28 650977 CS 5/16X2–1/4 GR8 (P) 48. . . . . . . . . . . . . .

29 054031 CLIP/TINE 48. . . . . . . . . . . . . . . . . . . . . . . . .

30 210–31017 NUT/SPECIAL 48. . . . . . . . . . . . . . . . . . . . . .

31 110–32354 TINE/DOUBLE 48. . . . . . . . . . . . . . . . . . . . .

32 220–32566 PIN/TINE BEARING 12. . . . . . . . . . . . . . . . .

MC2175 – REEL


��

�

�

�

�

�

�

�

�

�

��

�

��

��

��

� ��

��

��

��

��

��

��

��

Use onDrive End ONLY

MC2175 – SICKLE & GUARDS



01 110–32342 GUARD/SICKLE HVY DUTY 18. . . . . . . . . .

650495 CS 1/2X1–1/4 (LN) 2. . . . . . . . . . . . . . . . . .

650527 CS 1/2X1–1/4 (LN) 15. . . . . . . . . . . . . . . . .

650791 CS 1/2X1–3/4 (LN) 3. . . . . . . . . . . . . . . . . .

650834 CS 1/2X1–1/2 (LN) 18. . . . . . . . . . . . . . . . .

02 110–10655 SHIM 1/32 AR. . . . . . . . . . . . . . . . . . . . . . . . .

03 126320 CLIP/HOLDDOWN 8. . . . . . . . . . . . . . . . . . .

04 110–32323 CLIP/HOLDDOWN HIGH ARCH 1. . . . . . .

(OVER SICKLE HEAD)

05 360–32359 SHIM 1/8 AR. . . . . . . . . . . . . . . . . . . . . . . . . .

06 110–32405 GUARD/SPECIAL DRIVE END 1. . . . . . . .

07 097997 CLIP/SKID SHOE 6. . . . . . . . . . . . . . . . . . . .

08 110–32410 GUARD/SICKLE SPECIAL RH 1. . . . . . . . .

09 110–32330 GUARD/STUB 17. . . . . . . . . . . . . . . . . . . . . .

650453 CS 1/2X1–1/2 (LN) 2. . . . . . . . . . . . . . . . . .

650791 CB 1/2X1–3/4 (LN) 3. . . . . . . . . . . . . . . . . .

650834 CB 1/2X1–1/2 (LN) 1. . . . . . . . . . . . . . . . . .

030–31887 CB 1/2X2–1/2 (2LN) 29. . . . . . . . . . . . . . . .

097995 CB 1/2X2–3/4 (2LN) 3. . . . . . . . . . . . . . . . .

10 110–32409 GUARD/SICKLE SPECIAL LH 1. . . . . . . . .

11 110–32334 HOLDDOWN CLIP STUB GUARD 16. . . . .

12 110–32341 CLIP HOLDDOWN HIGH ARCH 2. . . . . . .

13 360–32404 SHIM 3/16 17. . . . . . . . . . . . . . . . . . . . . . . . .

14 110–32349 CLIP/ADJUSTMENT 32. . . . . . . . . . . . . . . .

15 110–32316 HEAD/SICKLE 1. . . . . . . . . . . . . . . . . . . . . . .

16 390–16339 CLAMP 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

651113 CS 7/16X1–3/4 (N) 1. . . . . . . . . . . . . . . . . .

17 091387 WASHER/HEX 1. . . . . . . . . . . . . . . . . . . . . .

18 091571a SECTION/END LT 1. . . . . . . . . . . . . . . . . . .

(TOP SERRATED)

091383b SECTION/END LT 1. . . . . . . . . . . . . . . . . . .

(UNDER SERRATED)

19 124737c SECTION/TOP SERRATED 35. . . . . . . . . .

H7547Ad SECTION/UNDER SERRATED 35. . . . . . .

050056e SECTION/OVER SERRATED 35. . . . . . . . .

(CHROMED)

060635f SECTION/UNDER SERRATED 35. . . . . . .

(CHROMED)

20 091572g SECTION/END RT 1. . . . . . . . . . . . . . . . . . .

(TOP SERRATED)

091382h SECTION/END RT 1. . . . . . . . . . . . . . . . . . .

(UNDER SERRATED)

091384i BOLT/#12–24X7/8 GR8 11. . . . . . . . . . . . . .

091385j BOLT/#12–24X5/8 GR8 65. . . . . . . . . . . . .

091386 NUT/LOCK #12–24 GR8 76. . . . . . . . . . . .

21 090692 SICKLE W/O HEAD (BOLT ON) 1. . . . . . . .

(TOP SERRATED)

090620 SICKLE W/O HEAD (BOLT ON) 1. . . . . . . .

(UNDER SERRATED)

CONVERSION KITS:

For Conversion Kit to install Regular Guards on 2175, order 088743.

For Conversion Kit to install Stub Guards on 2175, order 190–32585.

a) For box of (10) Left Half Sections, order 091125.b) For box of (10) Left Half Sections, order 091569.c) For box of (25) Top Serrated Sections, order 126300.d) For box of (25) Under Serrated Sections, order 083486.e) For box of (25) Chrome Over Serrated Sections, order 600190.f) For box of (25) Chrome Under Serrated Sections, order

060737.g) For box of (10) Right Half Sections, order 091126.h) For box of (10) Right Half Sections, order 091570.i) For box of (25) Screws W/Nuts, order 090052.j) For box of (50) Screws W/Nuts, order 090095.

MC2175 – SICKLE & GUARDS


�

�

�

��

��

��

�

�

��

�

�

�

�


01 094154 DRIVE/UNIVESAL ASSMD 1. . . . . . . . . . . .

02 091374 SHIELD/OUTER 1. . . . . . . . . . . . . . . . . . . . .


04 510223 BEARING/NYLON 1. . . . . . . . . . . . . . . . . . .

05 091373 YOKE & SHAFT 1. . . . . . . . . . . . . . . . . . . . .

06 510114 KIT/CENTER CROSS 2. . . . . . . . . . . . . . . .

07 091377 HOUSING/CENTER ASSY 1. . . . . . . . . . . .

08 094134 JOINT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

651240 CS 1/2X3 GR8 (N,L) 2. . . . . . . . . . . . . . . . .

09 092015 BEARING/NYLON 1. . . . . . . . . . . . . . . . . . .

10 091376 SHIELD/TUBE END 1. . . . . . . . . . . . . . . . . .

11 084242 BEARING/CENTRALIZER 1. . . . . . . . . . . . .

12 094155 STUB PLUG W/TUBE 1. . . . . . . . . . . . . . . .

MC2175 – COMPONENTS (TOWER–TO–GEARBOX PTO)


11

14

11

3

1

2

15

4

65

17

5

7

10

9

8

655

3

13121618

1413

1216

18

TowerEnd

TractorEnd


01 094157 JOINT/UNIV W/TUBE 1. . . . . . . . . . . . . . . .

02 094142 YOKE/SPRING LOCK ASSY 1. . . . . . . . . .

03 510114 KIT/CENTER CROSS 2. . . . . . . . . . . . . . . .

04 320–32615 YOKE/TUBE ASSY 1. . . . . . . . . . . . . . . . . . .


06 510023 BEARING/NYLON 2. . . . . . . . . . . . . . . . . . .

07 089207 GUARD/INNER ASSY 1. . . . . . . . . . . . . . . .

08 089960 GUARD/OUTER 1. . . . . . . . . . . . . . . . . . . . .

09 320–32616 YOKE/SHAFT ASSY 1. . . . . . . . . . . . . . . . .

10 089205 YOKE/QUIK–LOCK ASSY 1. . . . . . . . . . . . .

11 086928 BALL/STAINLESS 3/8 5. . . . . . . . . . . . . . . .

12 086927 SPRING 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

13 086926 COLLAR ASSY 2. . . . . . . . . . . . . . . . . . . . . .

14 350–32485 RING/RETAINING 2. . . . . . . . . . . . . . . . . . .

15 089286 DRIVE/MALE HALF ASSY 1. . . . . . . . . . . .

16 086931 WASHER 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

17 084242 CENTRALIZER 1. . . . . . . . . . . . . . . . . . . . . .

18 086930 COVER 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

MC2175 – COMPONENTS (TOWER–TO–TRACTOR PTO)


�

�

�

�

�

��

�

�

�


088841 HITCHJACK - WESBAR 1. . . . . . . . . . . . . .

CONSISTS OF:

01 061276 PIN & CHAIN 1. . . . . . . . . . . . . . . . . . . . . . . .

02 081462 TUBE/INNER ASSY 1. . . . . . . . . . . . . . . . . .

03 092021 TUBE/OUTER 1. . . . . . . . . . . . . . . . . . . . . . .

04 126735 HANDLE (LATER STYLE) 1. . . . . . . . . . . . .

081463a HANDLE & NUT (EARLY STYLE) 1. . . . . .

05 077838 CAP/TOP 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

06 094283 KIT/INTERNAL PARTS 1. . . . . . . . . . . . . . .

07 077836 KIT/GEAR 1. . . . . . . . . . . . . . . . . . . . . . . . . .

08 077839a SHAFT/CROSS 1. . . . . . . . . . . . . . . . . . . . . .

a) Replaced by 126735 later style Handle.

MC2175 – COMPONENTS (HITCHJACK)



090086 GEARBOX/ASSY 1. . . . . . . . . . . . . . . . . . . .

CONSISTS OF:

01 090087 HOUSING/GEARBOX 1. . . . . . . . . . . . . . . .

02 090088 BEARING 4. . . . . . . . . . . . . . . . . . . . . . . . . . .

03 089133 RING/SNAP 3. . . . . . . . . . . . . . . . . . . . . . . . .

04 090089 SPACER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

05 090090 SEAL/OIL 2. . . . . . . . . . . . . . . . . . . . . . . . . . .

06 084595 SHIM 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

07 090091 SHAFT/INPUT 1. . . . . . . . . . . . . . . . . . . . . . .

08 090092 RING/RETAINING 1. . . . . . . . . . . . . . . . . . .

09 090093 LOCKNUT 1. . . . . . . . . . . . . . . . . . . . . . . . . .

10 090094 SHAFT/OUTPUT 1. . . . . . . . . . . . . . . . . . . .

12 090096 PINION 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13 090097 PLUG 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14 090098 DIPSTICK/OIL 1. . . . . . . . . . . . . . . . . . . . . . .

15 090099 GASKET/GEARBOX COVER 1. . . . . . . . . .

16 090493 COVER/GEARBOX 1. . . . . . . . . . . . . . . . . .

17 090494 BOLT 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18 089131 CAP 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19 090495 WASHER/SPRING 1. . . . . . . . . . . . . . . . . . .

20 090496 GEAR 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21 089134 SHIM 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MC2175 – COMPONENTS (GEARBOX)


804861 Hydraulic Tongue Positioner

7

2

3

71

4

9

8

5

6


01 097597 HOSE/ASSY 1. . . . . . . . . . . . . . . . . . . . . . . .

02 580116 ELBOW/HYD FITTING 90 DEG 1. . . . . . . .

03 058757 ELBOW/HYD FITTING 90 DEG 1. . . . . . . .

(WITH .06 ORIFICE)

04 083357a CYLINDER/HYDRAULIC 1. . . . . . . . . . . . . .

05 040–33352 LOCK/CYLINDER 1. . . . . . . . . . . . . . . . . . . .

06 066452 PIN/LOCK 1. . . . . . . . . . . . . . . . . . . . . . . . . .

07 097860 CLAMP 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

08 097918 PIN/COTTER 2. . . . . . . . . . . . . . . . . . . . . . . .

09 076099 COTTER/HAIR PIN 2. . . . . . . . . . . . . . . . . .

a) For replacement Seal Kit order 084159.

803564 Mechanical Tongue Positioner

�

�

�

�

�

�


803564 CONROLT/MECHANICAL HITCH 1. . . . . .

CONSISTS OF:

01 125235 POSITIONER/OUTSIDE 1. . . . . . . . . . . . . .

02 220–32529 PIN/CYLINDER 2. . . . . . . . . . . . . . . . . . . . . .

076099 COTTER/HAIR PIN 2. . . . . . . . . . . . . . . . .

03 380–10448 SPRING/EXTENSION 1. . . . . . . . . . . . . . . .

04 090–32306 HANDLE 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

650491 CS 3/8X1-1/4 1. . . . . . . . . . . . . . . . . . . . . . .

650533 CS 3/8X1-1/2 1. . . . . . . . . . . . . . . . . . . . . . .

05 068209 CORD/CONTROL 1. . . . . . . . . . . . . . . . . . . .

06 480–42010 CLEVIS WLDMNT, INSIDE 1. . . . . . . . . . . .

MC2175 – OPTIONS & ACCESSORIES


806188 Transport Light Kit

��

��

��

��

�

��

��

�

�

Ref. Part Qty.No. No. Description Req.

806188 LIGHTS/DC MC TRANSPORT 1. . . . . . . . .

CONSISTS OF:

01 112884 LIGHT/TRANSPORT LT 1. . . . . . . . . . . . . . .

02 112885 LIGHT/TRANSPORT RT 1. . . . . . . . . . . . . .

03 112886 HOLDER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

04 125946 BASE/MOUNTING 8. . . . . . . . . . . . . . . . . . .

05 055648 TIE/WIRE 8. . . . . . . . . . . . . . . . . . . . . . . . . . .

06 650426 CS 1/4X1–1/4 8. . . . . . . . . . . . . . . . . . . . . . .

07 071401 NUT/NYLON INSERT LOCK 1/4 8. . . . . . . .

08 112706 SUPPORT/LIGHT 2. . . . . . . . . . . . . . . . . . . .

09 112893 HARNESS/“Y” 1. . . . . . . . . . . . . . . . . . . . . . .

10 112898 HARNESS/PRIMARY 1. . . . . . . . . . . . . . . . .

804891 Cutterbar Wear Plate

�


804891 GUARD/MC2175 ROCK 1. . . . . . . . . . . . . .

CONSISTS OF:

01 089767 PLATE/WEAR ASSY 2. . . . . . . . . . . . . . . . .

650791 CB 1/2X1–3/4 8. . . . . . . . . . . . . . . . . . . . . .

803584 Tall Crop Divider

1


01 290–32472 DIVIDER/TALL CROP 1. . . . . . . . . . . . . . . .

650731 CS 3/8X3–1/2 (N,L) 2. . . . . . . . . . . . . . . . .



804681 Center Skid Shoe

�

�

�

�


804681 CENTER SKID SHOE KIT 1. . . . . . . . . . . . .

CONSISTS OF:

01 076099 COTTER/HAIR PIN 1. . . . . . . . . . . . . . . . . .

02 220–32528 PIN 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

03 330–33296a SHOE/SKID ASSY 1. . . . . . . . . . . . . . . . . . .

04 097997 CLIP/SKID SHOE 3. . . . . . . . . . . . . . . . . . . .

a) Unit is equipped with (2) Skid Shoes as standard equipment

803098 Safety Tow Chain 10 Ton

��

�

�

�

�


803098 CHAIN/SAFETY TOW 10 TON 1. . . . . . . . .

CONSISTS OF:

01 043912 WASHER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

02 069076 WASHER 1. . . . . . . . . . . . . . . . . . . . . . . . . . .

03 080894 CLEVIS 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .

04 650172 CS 3/4X3–1/4 (N,L) 1. . . . . . . . . . . . . . . . . . .

05 650695 CS 5/8X3–1/2 (N,L) 1. . . . . . . . . . . . . . . . . . .

06 654014 WASHER/PLAIN WIDE 3/4 1. . . . . . . . . . . .



Notes

MC2175 - NUMERICAL INDEX

Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.


6H154 17 19

H786B 17 28

H6208 17 29

H7547A 25 19

004942 21 13

027003 21 01

027003 23 03

042162 09 11

042163 09 03

043912 32 01

044090 15 05

045582 09 16

046000 09 12

046001 09 13

047269 07 40

048182 23 12

049038 07 35

050056 25 19

054031 23 29

055648 31 05

056640 15 04

057557 17 09

058757 30 03

059743 04 09

060635 25 19

061276 28 01

061937 17 30

066452 30 06

066717 09 06

068209 30 05

068642 13 12

069076 32 02

070856 07 19

071401 31 07

076099 32 01

076099 30 09

076159 23 23

076313 17 25

076586 09 09

076958 11 11

077601 17 03

077601 15 06

077601 17 16

077836 28 07

077838 28 05

077839 28 08

078580 13 11

079716 09 02

079923 13 13

080894 32 03

081377 07 13

081462 28 02

081463 28 04

082620 09 01

082620 07 22

082621 09 17

082621 07 32

082623 09 01

082623 07 22

083357 30 04

083397 13 20

084242 26 11

084242 27 17

084595 29 06

086926 27 13

086927 27 12

086928 27 11

086930 27 18

086931 27 16

087756 04 07

087758 04 08

088841 28

088841 04 06

089131 29 18

089133 29 03

089134 29 21

089205 27 10

089207 27 07

089286 27 15

089767 31 01

089867 15 01

089871 15 03

089872 17 04

089872 15 07

089872 17 17

089960 27 08

090086 29

090086 19 06

090087 29 01

090088 29 02

090089 29 04

090090 29 05

090091 29 07

090092 29 08

090093 29 09

090094 29 10

090096 29 12

090097 29 13

090098 29 14

090099 29 15

090493 29 16

090494 29 17

090495 29 19

090496 29 20

090620 25 21

090692 25 21

090770 23 25

090796 23 25

091373 26 05

091374 26 02

091376 26 10

091377 26 07

091382 25 20

091383 25 18

091384 25 20

091385 25 20

091386 25 20

091387 25 17

091571 25 18

091572 25 20

091870 09 04

091918 17 20

092015 26 09

092021 28 03

092201 11 17

092204 11 17

092207 11 15

092208 11 15

092406 11 16

094134 26 08

094142 27 02

094154 26 01

094155 26 12

094157 27 01

094283 28 06

097334 11 18

097335 11 18

097597 30 01

097598 11 12

097599 11 13

097772 07 02

097772 11 22

097775 04 02

097827 13 15

097859 04 04

097859 08 10

097860 30 07

097918 30 08

097997 32 04

097997 25 07

098032 21 07

098235 19 25

111377 07 36

112705 15 10

112705 17 11

112706 31 08

112884 31 01

112885 31 02

112886 31 03

112893 31 09

112898 31 10

112905 13 01

112909 13 05

115727 17 06

117085 08 13

117085 07 21

117086 08 02

117927 08 04

122892 19 28

124128 08 11

124472 19 21

124484 04 12

124667 07 39

124737 25 19

125235 30 01

125421 04 05

125421 08 14

125751 23 26

125766 15 13

125882 07 37

125883 07 38

125894 17 18

125899 17 22

125946 31 04

126297 19 23




126320 25 03

126341 19 15

126342 04 11

126342 19 16

126375 04 10

126735 28 04

126739 09 15

126922 13 21

126936 15 12

126936 17 31

126937 23 18

126938 19 29

126939 17 01

126940 17 27

126942 19 36

126943 19 35

126948 17 05

126949 17 08

126951 17 07

126957 13 25

126958 13 17

126960 13 08

126961 13 07

127158 13 09

500076 21 12

510023 27 06

510100 26 03

510100 27 05

510114 27 03

510114 26 06

510223 26 04

520054 09 14

520065 21 02

520065 23 04

520085 23 02

520085 21 03

520092 04 13

520093 04 14

520093 19 24

520159 21 10

520195 17 02

520195 15 08

520201 09 05

520205 19 31

520206 19 32

580116 30 02

610748 13 10

650163 17 21

650172 32 04

650426 31 06

650695 32 05

650704 23 19

650977 23 28

651277 17 10

653029 15 11

653102 09 07

654014 32 06

655006 17 26

655010 09 08

803098 32

803098 04 15

803564 30

803584 31

804681 32

804861 30

804891 31

806188 31

010–32322 15 02

010–32388 23 27

010–32392 21 09

020–32214 19 01

020–32215 23 09

030–13498 23 16

030–17662 08 01

030–17662 07 03

030–31888 23 11

030–31904 07 12

030–31908 19 37

040–33325 07 29

040–33350 19 12

040–33351 23 05

040–33352 30 05

045–31395 19 03

045–31396 19 19

045–31404 11 20

045–31406 07 20

045–31407 07 05

045–31417 19 07

090–32297 11 10

090–32306 30 04

110–10655 25 02

110–32316 25 15

110–32323 25 04

110–32330 25 09

110–32334 25 11

110–32341 25 12

110–32342 25 01

110–32349 25 14

110–32354 23 31

110–32405 25 06

110–32409 25 10

110–32410 25 08

110–32416 23 21

120–32773 23 01

120–32774 23 17

180–10909 19 04

180–10909 23 08

200–32366 19 27

200–32448 19 39

200–32504 07 24

200–32505 07 27

200–32506 07 08

200–32507 07 11

200–32509 23 15

210–19533 23 20

210–31017 23 30

220–16199 13 04

220–18200 11 09

220–19812 21 05

220–21516 19 09

220–32513 11 06

220–32514 04 03

220–32515 07 30

220–32516 07 01

220–32517 07 14

220–32518 08 08

220–32519 07 31

220–32520 07 23

220–32528 32 02

220–32529 30 02

220–32566 23 32

240–32029 08 04

240–32034 19 08

240–32035 19 30

240–32036 23 14

240–32043 07 18

250–19364 19 10

250–32506 07 09

260–25753 19 18

260–32251 23 07

260–32252 19 02

260–32253 19 17

290–32461 11 02

290–32462 11 03

290–32468 19 11

290–32471 13 02

290–32472 31 01

310–16296 23 22

310–32513 08 07

310–32515 17 15

310–32515 17 24

320–32578 21 04

320–32615 27 04

320–32616 27 09

330–33259 11 14

330–33262 11 01

330–33269 04 01

330–33279 07 07

330–33283 13 06

330–33296 32 03

330–33297 13 14

350–32475 19 22

350–32485 27 14

360–14855 19 33

360–21711 19 05

360–32359 25 05

360–32404 25 13

360–32499 07 06

360–32500 07 04

360–32505 21 08

360–32506 21 14

360–32507 19 20

360–32510 19 34

360–32511 19 38

360–32512 19 13

360–32513 23 13

360–32520 19 38

370–18061 21 15

370–32113 21 06

370–32142 21 11

380–10448 30 03

380–14677 23 10

380–25728 19 14

380–32342 07 28

380–32348 11 07




380–32348 13 19

380–32350 07 10

380–32351 08 03

380–32354 17 13

380–32354 15 14

385–27865 17 14

385–27865 15 15

385–27865 07 33

390–16339 25 16

390–16339 19 26

390–32643 11 05

390–32657 23 06

390–32658 13 18

390–32696 11 19

400–10627 23 24

400–18916 11 08

400–21904 07 25

400–27079 15 05

400–32443 08 09

420–30377 13 03

420–30377 11 04

420–33066 08 12

420–33903 11 21

420–34436 13 16

420–34437 13 22

420–34438 13 24

420–34447 13 23

480–27676 08 06

480–27676 15 09

480–27676 17 12

480–27676 17 23

480–27676 07 26

480–42010 30 06

480–42349 07 34

TORQUE SPECIFICATIONSNOTE: Use these torque values when tightening GEHL hardware (excluding: Locknuts and Self–tap-ping, Thread Forming and Sheet Metal Screws) unless specified otherwise.

All torque values are in Lb-Ft except those marked with an * which are Lb-In(For metric torque value Nm, multiply Lb-Ft value by 1.355 or Lb-In value by 0.113)

UnifiedNational Thread

Grade 2 Grade 5 Grade 8UnifiedNational Thread Dry Lubed Dry Lubed Dry Lubed

8-328-36

19*20*

14*15*

30*31*

22*23*

41*43*

31* 32*

8-328-36

19*20*

14*15*

30*31*

22*23*

41*43*

31* 32*

10-2410-32

27*31*

21*23*

43*49*

32*36*

60*68*

45* 51*

10-2410-32

27*31*

21*23*

43*49*

32*36*

60*68*

45* 51*

1/4-201/4-28

66*76*

50*56*

910

75*86*

1214

9 10

1/4-201/4-28

66*76*

50*56*

910

75*86*

1214

9 10

5/16-185/16-24

1112 9

1719

1314 25

18 20

5/16-185/16-24

1112 9

1719

1314 25

18 20

3/8-163/8-24

2023

1517

3035

2325

4550 35

3/8-163/8-24

2023

1517

3035

2325

4550 35

7/16-147/16-20

3236

2427

5055

3540

7080

55 60

7/16-147/16-20

3236

2427

5055

3540

7080

55 60

1/2-131/2-20

5055

3540

7590

5565

110120

80 90

1/2-131/2-20

5055

3540

7590

5565

110120

80 90

9/16-129/16-18

7080

5560

110120

8090

150170

110 130

9/16-129/16-18

7080

5560

110120

8090

150170

110 130

5/8-115/8-18

100110

7585

150180

110130

220240

170 180

5/8-115/8-18

100110

7585

150180

110130

220240

170 180

3/4-103/4-16

175200

130150

260300

200220

380420

280 320

3/4-103/4-16

175200

130150

260300

200220

380420

280 320

7/8-97/8-14

170180

125140

430470

320360

600660

460 500

7/8-97/8-14

170180

125140

430470

320360

600660

460 500

1-81-14

250270

190210

640710

480530

9001000

680 740

1-81-14

250270

190210

640710

480530

9001000

680 740

Attaching Hardware

Size &Description

PartNumber

Size &Description

PartNumber

Size &Description

PartNumber

Size &Description

PartNumber

#6 L 654044 1/4 LN 071700 3/8 L 654026 1/2 P 654009

#6–32 N 650658 1/4 N 653005 3/8 LN 071703 5/8 L 654032

#6 P 654848 1/4 P 654002 3/8 N 653010 5/8 LN 071709

#10 L 650549 5/16 FLN 070648 3/8 NILN 067847 5/8 N 653021

#10–24 N 650550 5/16 JN 653034 3/8 P 654006 5/8 P 654012

#10–32 N 650648 5/16 L 654024 3/8 WN 653098 3/4 L 654034

#10 P 650584 5/16 LN 071701 1/2 JN 071706 3/4 LN 064331

#12 L 650813 5/16 N 653007 1/2 L 654030 3/4 N 653026

#12–24 N 650627 5/16 P 654004 1/2 LN 071706 3/4 P 654014

1/4 L 654022 3/8 JN 653038 1/2 N 653018 7/8 NF–SN 653102

906693/AP993 GEHL Company 1993 Printed in U.S.A.

Gehl Company 143 Water Street, P.O. Box 179, West Bend, WI 53095-0179

mower conditioner...9. 093366 important - store manual here 10. 093367 warning - owner’s...

Documents