8/10/2019 mp561e.pdf

1/8

SKF

TMBA G11

TMBA G11H

TMBA G11R

TMBA G11W

Gloves

Instructions for use

8/10/2019 mp561e.pdf

2/8

SKF TMBA G11Heat resistant gloves

DescriptionThe SKF heat resistant gloves TMBA G11 arespecially designed for the handling of heatedbearings. They are made of special fabric to obtainthe following combination of features:

Heat resistant up to 150CCut resistant

Lint freeNon allergenicFits a wide range of hand sizes

Technical dataPerformance level:

Mechanical protection according to EN 388

Level*Abrasion resistance 1

Blade cut resistance 3

Tear resistance 4

Puncture resistance 1

Thermal protection according to EN 407

Level*Burning behaviour X

Contact heat 1

Convective heat X

Radiant heat X

Small drops of molten metal X

Large drops of molten metal X

* Levels range from 1 (lowest) - 4 (highest), forblade cut 1 - 5, X = untested.EC type examination carried out by SGS Yarsley,I.C.S. Limited, SGS House, 217-221 LondonRoad, Camberly, Surrey, GU15 3EY (notifiedbody number: 0120).

Outside material HytexInner lining Cotton

Size 9 (EN 420)

8/10/2019 mp561e.pdf

3/8

Satisfies basic requirements of Personal ProtectiveEquipment Directive 89/686, being innocuous/ freefrom nuisance factors, ergonomic and breathable.

Care InstructionsGloves can be used upto ten years after the date ofmanufacture if stored correctly. Gloves should bestored away from direct sunlight to maintainoptimum properties of the glove.

Washing not recommendedPeel off greaseWipe cleanRinse with waterDrip dry

Warning:

8/10/2019 mp561e.pdf

4/8

SKF TMBA G11HHeat and oil resistant

gloves

DescriptionThe SKF heat and oil resistant gloves TMBA G11Hare specially designed for the handling of hot andoily bearings. They are made of multiple layers ofdifferent kinds of fabric to obtain an importantcombination of features:

Heat resistant up to 250COil and grease resistantSuitable for submerging in liquids of atemperature up to 120C (e.g. hot oil bath)Abrasion, cut, tear and puncture resistantLint freeNon allergenicFits a wide range of hand sizes

Technical dataPerformance level:

Mechanical protection according to EN 388

Level*

Abrasion resistance 4Blade cut resistance 3

Tear resistance 4

Puncture resistance 3

+

Thermal protection according to EN 407

Level*

Burning behaviour 4**Contact heat 2

Convective heat 4

Radiant heat 1

Small drops of molten metal X

Large drops of molten metal X

* Levels range from 1 (lowest) - 4 (highest), forblade cut 1 - 5, X = untested.EC type examination carried out by SGS Yarsley,I.C.S. Limited, SGS House, 217-221 LondonRoad, Camberly, Surrey, GU15 3EY (notifiedbody number: 0120).

8/10/2019 mp561e.pdf

5/8

** Burning behaviour is severely affected whencontaminated with oil(s) and/or grease(s).Avoid naked flames when the gloves arecontaminated with oil(s) and/or grease(s).

Performance in liquids:Gloves can be submerged in hot liquid, max. liquidtemperature 120C.Avoid entrance of hot liquid via the sleeve.Do not use punctured gloves in combination withliquids and hot vapours. Check for leakages by e.g.submerging in water at ambient temperature, priorto use in hot fluids. Ensure gloves are dry beforeusing with hot fluids.

Outside material Polyaramid

Inner glove Nitrile

Inner lining Cotton

Size 10 (EN 420)

Satisfies basic requirements of Personal ProtectiveEquipment Directive 89/686, being innocuous/ freefrom nuisance factors and ergonomic.

Heat resistance is a function of temperature andtime. The lower the temperature, the longer the

glove will resist heat.

Care InstructionsGloves can be used upto ten years after the date ofmanufacture if stored correctly. Gloves should bestored away from direct sunlight to maintainoptimum properties of the glove.

Washing not recommendedPeel off greaseWipe cleanRinse with waterDrip dry in vertical position

Warning:

8/10/2019 mp561e.pdf

6/8

SKF TMBA G11RReusable grease

resistant glove

DescriptionThe SKF reusable grease resistant glove

TMBA G11R is specially designed to protect theskin when working with SKF bearing greases. Theglove is made of a special material to obtain aunique combination of features:

Very flexible and comfortableBreathableGrease resistantLint free

Non allergenicWashableFits a wide range of hand sizes

Technical dataPerformance:

Grease resistance no deterioration of theglove after 24 hoursof exposure to SKFbearing greases

Outside material Polyurethane

Inner glove Nitrile

Inner lining Cotton

Size 10 (EN 420)

PPE classification minimal risks

Satisfies basic requirements of Personal ProtectiveEquipment Directive 89/686, being innocuous/ freefrom nuisance factors, ergonomic and breathable

Care InstructionsGloves can be used upto ten years after the date ofmanufacture if stored correctly. Gloves should bestored away from direct sunlight to maintainoptimum properties of the glove.

Wipe off greaseMachine washDrip dry

Warning:

8/10/2019 mp561e.pdf

7/8

SKF TMBA G11WStandard working glove

DescriptionThe SKF working glove TMBA G11W is speciallydesigned for general purpose industrialmaintenance work. The inside palm of the glove iscoated with non flammable dots providing excellent

grip. Other features are:Flexibility and comfortTear resistantLint freeNon allergenicFits a wide range of hand sizes

Technical dataPerformance level:

Mechanical protection according to EN 388

Level* Level*

Dottedside

Undottedside

Abrasion resistance 1 1

Blade cut resistance 1 2Tear resistance 4 4

Puncture resistance 2 1

* Levels range from 1 (lowest) - 4 (highest), forblade cut 1 - 5, X = untested.EC type examination carried out by SGS Yarsley,I.C.S. Limited, SGS House, 217-221 LondonRoad, Camberly, Surrey, GU15 3EY (notifiedbody number: 0120).

Maximum temperature 70 C

Material Hytex

Size 9 (EN 420)

Satisfies basic requirements of Personal ProtectiveEquipment Directive 89/686, being innocuous/ freefrom nuisance factors, ergonomic and breathable.

8/10/2019 mp561e.pdf

8/8

Care InstructionsGloves can be used upto ten years after the date of

manufacture if stored correctly. Gloves should bestored away from direct sunlight to maintainoptimum properties of the glove.

Washing not recommendedWipe off greaseRinse with waterDrip dry

Warning:

In line with our policy of continuousdevelopment of our products we reservethe right to alter any part of the above

specification without prior notice.

Although care has been taken to ensure theaccuracy of this publication, SKF does notassume any liability for errors or omissions.

SKF Maintenance Products Copyright SKF 2002/05

MP561E

www.mapro.com/skf

www.skf.com/mount