mrf organisation study report
DESCRIPTION
organisation (intership)study report of mrf tyres kottyam plant report on various functional departmentsTRANSCRIPT
ORGANISATION STUDY OF
MRF LTD, VADAVATOOR, KOTTAYAM, KERALA
Submitted in partial fulfillment of the requirements
for the award of the Degree of
MASTER OF BUSINESS ADMINISTRATION
of the Mahatma Gandhi University.
Submitted by;
ARUN K MATHEW
Regn No:
Under the guidance of
Mr. Balakrishnan Menon
JUNE - 2011
DC School of Management and Technology
Pullikkanam, Vagamon, Idukki 685503
Tel: 04869 – 248322,
ORGANISATION STUDY Page 1
DECLARATION
I hereby declare that the organisation study of ‘MRF LTD, VADAVATHOOR, KOTTAYAM, KERALA’
is a bonafied study carried out by myself, in partial fulfillment of the requirement for the award of degree in
Master of Business Administration from Mahatma Gandhi University is a record of the original work done
by me and no part of it has been submitted earlier for any Degree, Post Graduation, title or recognition in any
university or institution.
Place: Pullikkanam Signature:
Date Name:
ORGANISATION STUDY Page 2
CERTIFICATE OF THE INSTITUTION
This is to certify that the organisation study titled ‘ORGANISATION STUDY OF MRF LTD,
VADAVATHOOR, KOTTAYAM, KERALA’ is a bonafide record of the work done by Ms ARUN
KMATHEW, 3rd semester MBA Student of DC School of Management and Technology, submitted in
partial fulfillment of the requirements for the award of the Masters Degree in Business Administration of
Mahatma Gandhi University, Kottayam, Kerala.
Faculty Guide Principal
Date:
Place: Pullikkanam
Examiner I Examiner II
Signature
Name
Date
Signature
Name
Date
ORGANISATION STUDY Page 3
CERTIFICATE FROM THE COMPANY
ORGANISATION STUDY Page 4
ACKNOWLEDGEMENT
If the words are considered as symbols of approval and of gratitude then the following words play the heralding role of expressing gratitude. A great time and much effort have gone into developing this organisation study.
First and Foremost, I wish to express my sincere thanks to the Almighty God for giving me strength
and guidance in completing this project. I also wish to express my sincere thanks and heartfelt gratitude to
Brigadier Ashok Kumar, our esteemed Director,DC School Of Management And Technology for providing
me with such an opportunity.
I am especially thankful to my guide Mr. Balakrishnan Menon Sir, for his esteemed guidance,
expert advice and for inspiring us throughout the phases of this project. His unfailing guidance and
continuous support rendered at every stage of my work has helped me to complete my endeavor
successfully.
I proudly take this opportunity to express my thanks to Ms.Premela.P.Skariah, Assistant Manager,
Welfare, MRF Ltd Kottayam for permitting me to conduct my study.
I express my thanks to Ms.Deepthi Mol K.M, MRF Ltd,Kottayam for her support and help.
I am thankful to all the officials of MRF Ltd, Kottayam for providing a good environment that
helped me to complete this study within the specified time.
Above all, I thank almighty God, my family, friends and others for their support
ARUN K MATHEW
ORGANISATION STUDY Page 5
ORGANISATION STUDY Page 6
CONTENTS
CHAPTER TITLE PAGE NO.
1 INTRODUCTION 8
2 INDUSTRIAL PROFILE 13
3
(a)
(b)
(c)
(d)
COMPANY PROFILE
PRODUCT PROFILE
MRF KOTTAYAM UNIT
ORGANISATIONAL STRUCTURE
DEPARTMENT PROFILE
PRODUCTION DEPARTMENT
PRODUCTION PLANNING DEPARTMENT
QUALITY ASSURANCE DEPARTMENT
TECHNICAL DEPARTMENT
20
30
33
39
40
42
44
44
48
ORGANISATION STUDY Page 7
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)
PLANT PURCHASE DEPARTMENT
RAW MATERIALS STORE DEPARTMENT
SHIPPING DEPARTMENT
ACCOUNTS DEPARTMENT
INDUSTRY ENGINEERING DEPARTMENT
SAFETY DEPARTMENT
SECURITY DEPARTMENT
HUMAN RESOURCE DEPARTMENT
52
52
53
54
55
57
58
60
4 SWOT ANALYSIS 63
ORGANISATION STUDY Page 8
5 FINDINGS AND SUGGESTIONS
CONCLUSION
BIBLIOGRAPHY
67
69
70
ORGANISATION STUDY Page 9
ORGANISATION STUDY Page 10
CHAPTER 1
INTRODUCTION
ORGANISATION STUDY Page 11
INTRODUCTION
About The Tyre Industry,
The tyre industries in India come into existence with establishment of trading outlets by U S based Fire
Stone Tyre and Company in1922 and followed by Dunlop Rubber Company in 1926.The Indian Tyre
industry has witnessed a Cumulative Annual Growth Rate (CAGR) 7.7% over the last decade. Economic
expansion, investments and road developments have all contributed to this
Increase in demand for vehicles. This has helped the growth in the tyre industry. The tyre industry is the
major consumer of the domestic rubber production. The tyre industry is mainly dominated by organized
sector; the unorganized sector holds in bicycle tyres. The major players in the organized sector consist of
MRF, Apollo tyres, ceat, and J K Industries, which account of the 63% of the organized tyre market.
About The Company
MRF Ltd was established in the year 1946. The company name is an acronym for “Madras Rubber
Factory”. It was started by KM Mammen Mappillai at Thiruvottiyur Chennai. In the year 1951, the company
took up the manufacture of trade rubber. MRF Ltd was incorporated towards the end of 1960 and was
converted into Public Limited Company in 1961. Since then it has emerged as the largest tyre manufacturer
in India and 12th largest in the world with turnover of Rs 5800 Cr. with capacity of six million tyres from six
production units in India. With a profit margin of 1.3% in tyre manufacturing sector, MRF hold 24% of
market share. MRF tyres are rolled out of six interdependent facilities, which are built over 450 acres and
with over 15,000 dedicated people. MRF has over 3000 strong dealer network with 180 offices. What this
means is that the company boasts of the largest range of tyres in India - from heavy duty truck tyres to 2-
wheeler tyres, The MRF Pace Foundation is synonymous with training and teaching the world's best fast
bowlers.
ORGANISATION STUDY Page 12
Production units of MRF are located at:
1. Tiruvittiyur ,Tamil Nadu
2. Kottayam, Kerala
3. Medak, Andhra Pradesh
4. Arkonam, Tamil Nadu
5. Pondicherry
6. Ponda, Goa
7. Sri Lanka.
The main objective of the company is ‘to attain global standard through continuous improvement
in the quality products and service in order to maintain market leadership’. The main strategy of the
company in today’s competitive world is ‘cut cost and win the battle’.
ORGANISATION STUDY Page 13
IMPORTANCE OF THE STUDY
The study was conducted at Madras Rubber Factory Limited (MRF), Vadavathoor, Kottayam.
MRF Ltd. is one of the well known, most advanced and leading manufacturers and exporters in tyres. The
organisation study was conducted in order to understand the functioning of the various departments and
activities undertaken by them; organisational structure; roles and functions of different departments; the
vision, mission, and objectives of the company, its product profile, rules and regulations in the company etc.
Organisational study covered all functional aspects of the organisation.
The study gives us some corporate working exposure. It helps to know about the rubber, and
tyre industry which is very important as far as the Indian economy is concerned. It also gives a clear picture
of working of a manufacturing organisation and importance of industry in the economic development of a
country. The study mainly concentrates on the important functions of the organisation. The activities of each
area are carefully studied.
OBJECTIVES OF THE STUDY
To study about the operations performed at various levels of departments.
To know the quality standards of the products.
To know about MRF Ltd as an organisation
To know the functioning of the various departments
To observe the routine activities of the workers in various level
To understand the organisation structure.
ORGANISATION STUDY Page 14
METHODOLOGY
Research cannot be contacted abruptly; the researcher has to plan the research process systematically. The research process includes a number of steps. If all the steps are taken in systematic manner the research conducted become quite effective.
Types of Data
There are two types of data;
Primary data
Secondary data
Primary data
Primary data is those data collected by the researcher for the first time, it is fresh in nature. This data do not
exist in records or publications. Here primary data is collected through departmental study through
interactions with different department heads and staffs.
Secondary data
Secondary data comprises of the data which have already been collected by another researcher for
some other purpose and currently available. The secondary data was collected from the internal records of
the company, library reference and internet.
LIMITATIONS
1. Less time available for an interview or conversation with the workers.
2. Only limited persons could be covered under the study
3. The workers were busy with their work
ORGANISATION STUDY Page 15
4. Sensitive information was not shared by the company.
CHAPTERISATION
The Organisation Study has been presented in the following format:
The first chapter deals with the introduction of the study which includes; introduction about the industry and company, importance of the study, objectives of the study, methodology, limitations and chapterisation.
The second chapter highlights the industry profile
The third chapter deals with company profile. It consists of the study of the company, organisation chart, different operations, products and departments of the company.
The fourth chapter contains the SWOT analysis.
The fifth chapter gives the findings, suggestions and conclusions of the study.
ORGANISATION STUDY Page 16
CHAPTER 2
INDUSTRY PROFILE
ORGANISATION STUDY Page 17
INDUSTRY PROFILE
RUBBER INDUSTRY
Rubber is an organic substance from natural resources or synthesized artificially which has the prescribed properties of extensibility, strechability and toughness. The scientific name of Rubber is “Heaven Brasiliensis”. It acquired this name because of its ability to erase.
Nearly 85% of the plantations are in the hand of small farmers. The industry pays highest wages to its workers more than those who can earn from other plantations. A rubber tree can help tap regularly throughout the tree remains productive for 30 to 40 years. Indians per hector yield of rubber is the highest in the world (about 1500 kg)
The natural rubber from just 25%of the world requirements the rest is made up with synthetic rubber items from petroleum. But natural rubber is still essential for certain products-nearly 50%to60% of auto and track tyres is natural rubber where synthetic rubber is used for production of tubes.
The Indian Tyre Industry
The foreign companies dominated the Indian tyre industry till 1960; however in the latter part of 60’s and early 70’s the Indian industrial, Entrepreneurs’ made a stylish entry into the market alongside collaboration with the automobile sector foundation with in the country. The tyre industry saw the entry of players and with the winds and liberation blowing a midst hue and cry, swept the entire land in 1992 and brought about the role of joint ventures within the industry.
Ever since the first Indian tyre company, Dunlop Rubber Company (Indian) was incorporated in
1926, the type industry has grown rapidly and today it is an Rs.9000 crore industry. The Indian tyre industry
ORGANISATION STUDY Page 18
produce the complete range of tyres required by the Indian automotive industry, except for aero tyres and
some specialized tyres. Domestic manufactures produce for trucks, buses, passenger cars, jeeps, light trucks,
tractors (front, rear, and trailer), animal drawn vehicles, scooters, motorcycle, mopeds, and bicycles and off
the road vehicle and special defense vehicle.
Indian has 2.61 lakh vill ages, connected by 6.23 lakh kms to metal led roads and 9.81 lakhs kms of
unmetalled roads. These villages are linked to small town and cities. There exists a vast potential for the tyre
industry in India. The fortune of the tyre industry depends on the agricultural and industrial performance of
the economy, the transportation needs and the production of vehicles. Hence, this is a very sensitive industry,
which has to adapt itself to a highly volatile environment.
While the tyre industry is mainly dominated by the organized sector, the unorganized sector holds
away in bicycle tyres. The major players in the organized tyre segment consist of MRF Tyres, Apollo Tyres,
Ceat, and Jk Industries, which account for 63 percent of the organized tyre market. The other key players
include Modi Rubber, Kesoram industries, and Goodyear India, with 11 percent, 7 percent and 6 percent
respectively. Dunlop, Falcon, lyre Corporation of India Limited (TCIL), TVS Srichakra, Metro tyres and Bal
Krishna Tyres are some of the other players in the industry.
The Indian tyre industry evolves itself around some silent features like:
Adaptability
Innovation
Export
Technology progression
Wide product range for divers’ usage.
The Original Indian tyre market can be categorized into three. They are;
equipment market
ORGANISATION STUDY Page 19
Replacement market
Export market
MRF, the largest tyre manufacture in the country, has strong brand equity. While it rules supreme in
the industry, other players have created richest markets of their own. The tyre industry is a major consumer
of the domestic rubber production. Natural rubber constitutes 80% of the material content in Indian tyres.
Synthetic rubber constitutes only 20% of the rubber content of the tyre in India. Worldwide, the ratio of
natural rubber to synthetic rubber is 30:70. Apart from natural and synthetic rubber, rubber chemical are also
widely used in tyres. Most of the RSS- 4 grade natural rubber required by the Indian tyre industry is
domestically sourced, with only a marginal amount being imported. This is an advantage for the industry,
since natural rubber constitutes 25% of the total raw material cost of the tyres.
The two types of synthetic rubber used in tyres are Poly Butadiene Rubber (PBR) and styrene
Butadiene Rubber (SBR). The former is used in most of the tyres, while the latter is mainly used in the
radials for passenger cars. Synthetic rubber accounts for 14% of the raw material cost. Unlike in the case of
natural rubber, India imports 60% of its synthetic rubber requirements.
On the export front, the Indian tyre companies need to explore newer markets as the existing market
for bias truck tyre which accounts for about 45% of the total export volume is nearing saturation. This apart,
with rationalization caching up in the foreign markets, the Indian tyre companies need to graduate to radial
tyres so as to protect their share in the export market.
At present, radicalization of tyre is low in India except of the car tyre market where 95% of the tyres
are radicalized while cross ply tyres is preferred in all other categories. Cross ply tyres are preferred owing to
poor road conditions, overloading in trucks, higher cost of radial tyres and poor awareness among the tyre
users in the country.
ORGANISATION STUDY Page 20
The tyres basically produced in India are
Crossply
Radial tyre
Raw materials
The main raw materials for tyre are;
Rubber
Carbon black
Nylon cord
Chemicals.
GLOBAL SCENARIO
Thailand, Indonesia, China, Malaysia, Vietnam are the major producers of rubber in the world.
The global production fluctuates between 6-8 million tons, with the production of
Million tons in 2003, of which Asian countries have produced 6.76 million tons.
On the consumption front, global natural rubber consumption is 7.89 million tons of which 1.9
million ton was consumed in India and China alone. The total synthetic rubber consumption was
1.13 million ton.
ORGANISATION STUDY Page 21
Around 60% of the global rubber production is used by the transportation sector. In this sector,
natural or synthetic rubber cannot be used individually and has to be blended.
MAJOR WORLD MARKETS
Tokyo Commodity Exchange, Singapore Commodity Exchange, Osaka Mercantile Exchange are
the major exchange undertaking futures trading of rubber. Kurla Lampur, London, New York is the major
physical markets.
Government policy (Tyre policy)
Tyre Industry Delicensed since in 1987
All categories of new tyre can be exported freely.
All categories of new tyre can be imported freely.
No wto bound rates for tyres and tubes.
All raw materials required for the manufacture of tyres can be imported freely
Custom duties: Tyres
Normal rates of basic custom duty 10%
Concessional customs duty under trade agreements
Asian Pacific Trade agreement
(Formerly known as Bangkok agreement) 8.60%
Indo Sri Lanka free trade agreement nil duty
SAPTA 5%
India Singapore comprehensive Economic nil duty
ORGANISATION STUDY Page 22
Cooperation Agreement
Excise Duty: Tyres
When imported from Bangladesh, Bhutan, Maldives, Nepal is 10%
Predicted scenario of the industry
Globally, the original Equipment Manufacturer segment constitutes only 30 percent of the tyre market,
exports 10 percent and the balance from the replacement market. In India, the scenario is quite different.
Nearly 85 percent of the total tyre demand in the country is for replacement. This anomaly has placed the
retreaders in a better position than the tyre manufacturers. Retreading is looming over the tyre industry as a
colossal threat. The Coimbatore based Elgi Tyres and tread Ltd., the largest retreader in India, is giving the
tyre barons sleepless nights.
Retreading is replacing the worn-out tread of the old tyre with a new one. The popularity of retreading stems
from the fact that it costs only 20 percent of a new tyre but increases its life by 70 percent to 80 percent.
Most of the transporters in India retread their tyres twice during its lifetime, while a few fleet owners even
retread thrice. In their zealousness to economize costs, they overlook the reality that retreading reduces the
quality of the tyre. It is highly popular in the south unlike in the north where the transporters overload their
trucks and have to ply their vehicles in a rough terrain, an environment in which buying a new tyre is the
best option.
THREATS
The industry, already bogged by over capacity, is facing a severe threat of dumping of cheap tyres by South
Korea. Under the Bangkok agreement, signed between India and South Korea in 1976, import of tyres from
the latter into India would attract a concessional duty of 33 percent as against the normal tariff of 40 percent.
Two years ago, the industry estimated the growth in the passenger car radial demand at 20 percent per
annum. However, the auto recession has hit them badly. But South Korea made a killing by dumping cheap
car radial tyres and walked away with 11 percent of the tyre market.
ORGANISATION STUDY Page 23
Another threat to the industry is the price of its raw materials, most of which are petroleum by-products.
Carbon, synthetic rubber and nylon tyre cord are offshoots of petrochemicals. Thus, the future of the industry
will swing with the supply of crude oil.
The biggest threat, however, is yet to fully materialize. It will be from global majors like Bridgestone and
Michelin, which control 36 percent of the global tyre market. These players have set up their bases in South-
east Asia and the slump of the markets in this region coupled with the vast growth potential of the Indian
market, is beckoning them towards India.
Bridgestone has tied up with ACC for a 100 percent radial tyre unit and Michelin is also marketing its
products through retail outlets. The industry is driven more by volumes than by margins and each of the big
five in the global tyre industry Continental, Michelin, Goodyear India, Pirelli and Bridgestone generate an
annual tyre production equivalent to the total demand of the Indian market.
Major Market Player s and Their Market Share
Last Price Market Cap.(Rs. cr.)
SalesTurnover
Net Profit Total Assets
Apollo Tyres
72.50 3,654.18 5,490.74 198.25 2,859.55
MRF 6,956.00 2,950.14 7,463.74 353.98 2,643.17
Balkrishna Ind
155.50 1,503.04 1,394.30 208.73 1,125.10
JK Tyre & Ind
100.75 413.67 4,831.22 61.32 1,553.60
Ceat 102.05 349.46 3,516.33 22.28 1,058.11
TVS Srichakra
306.00 234.31 706.39 29.82 260.29
ORGANISATION STUDY Page 24
Some of the major players in the Indian tyre industry are MRF, Ceat, JK industries, Apollo tyres,
Bridgestone India, Goodyear India, Falcon Tyres and TVS Srichakra.
Name of the company Market Share
MRF Ltd (Market Leader) 24%
Apollo Tyres Ltd. 21%
JK Tyre & Industries 18%
Ceat Ltd. 13%
Others 24%
The prospectus of tyre exports from India appears healthy; following efforts by Indian companies
to increasing entering into out sourcing agreement with tyre producers in South-east Asia, Eastern Europe
and Latin America. Overall, tyre manufacturers are likely to tap the export market in an effort to boost sales.
The increasing exports of bus and truck tyre from India to developing countries is because of the fact that
developing countries is because of the fact that developing countries are unable to source them from
developed countries as these are no more
produced there. Tyre imports are unlikely to pose a threat to the domestic industry, given that domestic
prices are lower than international tyre prices.
ORGANISATION STUDY Page 25
In the domestic market, tyre manufacturers are expected to increasingly focus on expanding their dealership
networks and explore possibilities of tie-ups among themselves to penetrate the growing customer base.
They are also likely to pursue innovative measure to improve customer awareness.
The consolidation of the Indian tyre industry is likely to continue in the coming years through mergers
among existing players. The industry is likely to expand through a combination of organic and inorganic
growth. While organic growth would come from raising efficiency levels, inorganic growth would be
achieved through alliances and mergers & acquisitions.
CHAPTER - 3
COMPANY PROFILE
ORGANISATION STUDY Page 26
COMPANY PROFILE
Madras Rubber Factory, popularly known as MRF, is a major tyre manufacturing company located in
Chennai, Tamil Nadu, and India. MRF is mainly involved in making vehicle tyres. It is India's largest tyre
manufacturing company.
The company was established in the year 1946. The company name is an acronym for Madras
Rubber Factory. MRF Ltd was started by a young pioneer called K.M.MAMMEN MAPILLAI as small toy
balloon manufacturing unit in a small shed at Thiruvottiyur in Chennai. Since then over this long golden 60
years it has emerged as the largest tyre manufacturer in India. It is also the world’s 13 th largest tyre
manufacturing company. It is one of the largest rubber companies both worldwide and in Indian private
sector. MRF holds more than 20% of the market share. It is the only tyre company to straddle the continent
with giant manufacturing facilities at Chennai, Arakonam, Kottayam, Goa, Medak, and Pondicherry.
The company carters to all vehicle segment from commercial vehicle and passenger cars to 2 -3
wheelers and tractors and has a strong presence in both radial and cross ply segments. It is also involved in a
range of other activities via subsidiaries. Funskool India, a joint venture between Hasbro and MRF LTD. is a
major toy manufacturing company in the country. MRF Pretreads offers world class procured tyre retreading
service, and MRF Muscleflex is involved in making conveyor belts. It is presently under the leadership of
Vinoo Mammen, son of the Late K.M.Mammen Mappillai.
It has a distribution network of more than 2500 outlets in the country, overseas offices in United
Arab Emirates, Bangladesh and Vietnam and export tyres in over 75 countries globally. MRF LTD. enjoys
of manufacturing the largest range of tyres in India and it has the highest brand preference for superior
ORGANISATION STUDY Page 27
quality, appearance and wearability. It manufactures the largest range of tyres in the country and is the
market leader with the largest market share in almost every segment of the tyre industry.
MRF LTD. is the first Indian company to export tyres to the U.S., the very birth place of the tyre
technology. It is also the first company in India to manufacture and market Nylon tyres and passenger tyres
commercially. In 2007, the company’s turnover crossed INR 50 billion mark.
MRF LTD. is the pioneer in motor racing tyres in India. MRF tyres are made to run at speeds exceeding 150
kmph, at which they are exposed to extreme conditions of speed and traction. The molecular stability of the
rubber compounds is tested against severe gravitational stress. MRF’s tyre experts and rubber technologists
are present at every stage to observe, analyze and gather information at the pits and the dirt track, which they
pass on to the R & D department. This is then reviewed and used to safer and better quality tyres, not only
for the formula cars and racing bikes, but also for cars that rough it out on the tough Indian roads every day.
OBJECTIVES OF THE COMPANY
The main objective of the company is ‘to attain global standard through continuous improvement in
the quality products and service in order to maintain market leadership’. The main strategy of the company
in today’s competitive world is ‘cut cost and win the battle’. As the number of accidents in similar factories
is comparatively more, the emphasis of the company is ‘accident free safe production’.
MRF Ltd achieves the objectives by taking the following actions;
Product / process improvement by performance monitoring and prompt service to the
customer.
Upgradation of all the machinery to meet the increasing needs of customer.
Continuous training is given to all employees in order to acquire necessary skills and knowledge and
improve the quality of work life
ORGANISATION STUDY Page 28
MRF MISSION
To continue developing an aggressive, independent national advocate for the advancement of motorcycling
and its associated lifestyle which is financially stable and exceeds the needs of motorcycling enthusiasts.
MRF VISION
MRF will be a significant global player delighting customers worldwide through
Leadership in technology
Excellence in manufacturing
World class systems
Driven by a team of motivated by high performers to achieve profitable growth.
Major brands.
Superlug - country’ largest selling truck tyre.
Shakthi - country’ largest selling tractor tyre.
Zigma - country’ largest selling radial car tyre.
Nylogrip - country’ largest selling two wheeler tyre.
Legend - country’ largest selling conventional car tyre.
The six production units of MRF are located in:-
1.Tiruvottiyur, Tamilnadu. For automobile tyres.
2.Arkonam, Tamilnadu. For bicycle, scooter, auto rickshaw tyres.
3.Goa for automobile tyres and procured tread rubber.
4.Kottayam, Kerala. For automobile tyres, tubes, procured tread rubber.
5.Medak, Andrapradesh. For automobiles.
6.Pondicherry for radial tyres.
ORGANISATION STUDY Page 29
EVOLUTION OF MRF
A race from the birth to success…………
1946
A young entrepreneur, K. M. Mammen Mappillai, opened a small toy balloon manufacturing unit in a shed
at Tiruvottiyur, Madras (now Chennai).
1949
Although the factory was just a small shed without any machines, a variety of products, ranging from
balloons and latex-cast squeaking toys to industrial gloves and contraceptives, were produced.
During this time, MRF established its first office at 334, Thambu Chetty Street, Madras (now Chennai),
Tamil Nadu, India.
1952
MRF ventured into the manufacture of tread rubber. And with that, the first machine, a rubber mill, was
installed at the factory. This step into tread-rubber manufacture was later to catapult MRF into a league that
few had imagined possible.
1956
The quality of the product manufactured was of such a high standard that by the close of 1956, MRF had
become the market leader with a 50% share of the tread-rubber market in India. So effective was MRF's hold
on the market, that the large multinationals had no other option but to gradually withdraw from the tread
rubber business in India.
1961
With the success achieved in tread rubber, MRF entered into the manufacture of tyres. MRF established a
technical collaboration with the Mansfield Tire & Rubber Company of USA. Around the same time, it also
became a public company.
It set up a pilot plant for tyre manufacture at Tiruvottiyur, Madras (now Chennai). The Chief Minister of
Madras Mr. K. Kamaraj released the first tyre from the tyre plant.
ORGANISATION STUDY Page 30
1963
On June 12, 1963, India's first Prime Minister, Late Pandit Jawaharlal Nehru laid the foundation stone for the
Rubber Research Centre at Tiruvottiyur to commemorate the inauguration of the Tiruvottiyur factory.
1964
With the commissioning of the main plant in 1964, MRF also made progress in the export of tyres. An
overseas office at Beirut (Lebanon) was established to develop the export market, and it was amongst India's
very first efforts on tyre exports. This year also marked the birth of the now famous MRF Muscleman.
1967
MRF became the first Indian company to export tyres to USA - the very birthplace of tyre technology.
1970
MRF inaugurates its Kottayam unit
1971
MRF opens its factory in Goa
1972
MRF's Arakkonam plant is inaugurated
1973
MRF scored a major breakthrough by being among the very first in India to manufacture and market Nylon
passenger tyres commercially.
1978
MRF developed the MRF Superlug-78, a sturdy tyre for heavy-duty trucks. The tyre was a significant
improvement over its existing products, and went on to become the country's largest selling truck tyre in
later years.
ORGANISATION STUDY Page 31
1979
MRF's turnover crossed INR one billion.
1980
MRF entered into a technical collaboration with the B.F. Goodrich Tyre Company of USA, which was
involved with the development of tyres for the NASA space-shuttle. With this began a significant exercise in
quality improvement and new product development.
1984
Sales crossed INR two billion. MRF tyres were the first tyres selected for fitment onto the Maruti Suzuki 800
- India's first small, modern car.
1985
MRF Nylogrip tyres for two-wheeler vehicles were launched.
1986
MRF was selected by the National Institution of Quality Assurance for their most prestigious award. Pitted
against 20 tyre companies worldwide, MRF also won 6 Quality Improvement Awards instituted by the B.F.
Goodrich Tyre Company from USA.
1987
MRF crossed the INR three billion mark and also became the No. 1 tyre company in India. MRF Legend, the
premium nylon car tyre was introduced.
1988
The MRF Pace Foundation was set up, with international pace bowler, Dennis Lillee as its Director. Not
long thereafter, pace bowlers trained at the Foundation were selected for the Indian Cricket Team.
1989
1989, MRF was the clear market leader in every tyre segment. Once again, in recognition of excellence,
MRF was awarded the Visvesvaraya Award for the Best Business House in South India.
ORGANISATION STUDY Page 32
MRF collaborated with Hasbro International USA, the world's largest toy makers, and launched Funskool
India. Company also entered into collaborations with Vapocure, Australia to manufacture polyurethane paint
formulations and with Pirelli for MUSCLEFLEX Conveyor & Elevator Belting. MRF opens its MDK unit
MRF launched the MRF ZIGMA CC Radial. Synchronizing with the MRF World Series Cricket
Tournament for the Jawaharlal Nehru Trophy sponsored by the company. MRF also opened the MRF
Tyredrome, India's first tyre company-owned wheel care complex at Madras (now Chennai).
1990
MRF brought the 6th World Cup Boxing Championship to Mumbai - the first of its kind - with 39 countries
participating.
1993
K. M. Mammen Mappillai was awarded the Padmashri Award of National Recognition for his contribution
to industry - the only industrialist from South India to be accorded this honour until that time.
MRF became the first tyre company in India to cross the INR 10 billion mark.
In 1993 and 1995, the company was voted by the Far Eastern Economic Review, as one of the ten leading
Corporate Groups in India and a Leader in Asia. During the same time MRF was selected as one of India's
most admired Marketing Companies by the readers of the A & M magazine.
1995
The company's turnover crossed INR 15 billion. MRF was chosen for fitment on the Daewoo Cielo.
1996
In the Golden Jubilee year, Mr & Mrs. Mammen Mappillai received gold medal for being the first 2
employees of the company. A special factory dedicated entirely to the manufacture of radials was started at
Pondicherry. MRF Tyres were also chosen for fitment on the Ford Escort, Opel Astra and Fiat Uno. Further
proof of its superior quality.
1997
MRF launches its first ever F3 car
1998
ORGANISATION STUDY Page 33
MRF launches its Super Lug tyre for trucks
2000
MRF Launched ZVTS tyres for passenger cars. MRF launched the Smile campaign on Indian roads.
2001
The MRF rally team wins the APRC rally
2002
MRF wins the JD Power award. The MRF Nylogrip Zapper for two-wheelers is launched
2003
MRF wins the JD Power award. MRF registers its second APRC victory.
2004
MRF's turnover crossed INR 30 billion mark
2005
MRF wins its third APRC rally
2006
MRF's turnover crosses the 5000 crore mark
2007
MRF launches ZSLK tyres. MRF launches the Super Lug FS which many users claim to have provided them
fuel savings. MRF launches the Super Lug 505 - A premium mileage, rear fitment truck tyre for national
highway operations on rated roads. MRF wins the JD Power award. Australian PM visits the MRF Pace
Foundation.
2008
MRF wins the JD Power award again for the 6th time
ORGANISATION STUDY Page 34
Present
It is also involved in a range of other activities via subsidiaries. Funskool India, a Joint venture between
Hasbro and MRF, is a major toy manufacturing company in the country. MF Pretreads offers world class
procured tyre retreading service, and MRF Muscleflex is involved in making conveyor belts. It is presently
under the leadership of Vinoo Mammen, son of the late K.M. Mermen Mapp illai
POLICIES OF MRF
1. QUALITY POLICY
The main quality objective of the company is to ‘maintain market leadership through continuous
quality performance”
2. SAFETY POLICY
Safety and health of the employees shall be the first priority of the company. It is the responsibility
of each and every individual in the organisation, regardless of the position he occupies, to ensure that
everyone in the factory returns home without any injury. The company offers ‘ACCIDENT FREE
SAFE PRODUCTION’ not only in letter but also in spirit, for the benefit of one and all through this
policy.
3. ENVIRONMENT POLICY
The environment Policy of MRF LTD. is ‘to manufacture the company’s products in an environmentally
friendly and safe manner’.
This is to maintain our products in an environmentally friendly and safe manner. To achieve this goal, all the
MRF plants, together with corporate office shall
Minimize the impact of our manufacturing activities on the environment especially the air,
water, and soil.
ORGANISATION STUDY Page 35
Comply with all applicable regulatory requirements
Develop environmental performance evaluation procedures for continuous monitoring
Optimizes the consumption of resources (water, energy and raw materials) by minimizing
wastage, recovering and recycling where ever possible.
Up gradation of the machinery and pollution control equipment when required
Train all our employees to perform their activities in an environmentally responsible land
safe manner
At the plant level, the respective Senior General Managers/ General Managers are assigned the
responsibility of carrying out the environmental system by collaborating with corporate functions..
4. TRAINING POLICY
The training policy of MRF LTD. is ‘to provide and develop knowledge, skills and behavior of the
company’s employees to continuously improve their performance’.
MRF plants along the corporate office join hands to accomplish the following.
Competency evaluations conducted each year identify and document the training needs of
the employees.
Design and publish the training calendar and schedule.
Monitor and evaluate training process and out come to asses and to decide the next training
cycle requirement.
Collaboration of the activities along with the activities of human resource department plants.
MANAGEMENT
The success or failure of a company is determined by the performance of its management. It has to play
a major role in functions such as decision making. Management of MRF LTD. is lead by
Mr. K.M.Mammen, son of Mr. Mammen Mappillai who started this company almost 60 years ago.
ORGANISATION STUDY Page 36
BOARD OF DIRECTORS
K.M. Mammen – Chairman & Managing Director
Arun Mammen – Joint Managing Director
K.M. Philip – Whole Time Director
Dr. K.C.Mammen – Director
C.G.Rangabashyam – Director
K.D. Parakh – Director
Ashok Jacob – Director
S. Nandagopal – Director
V. Shridhar – Director
Vijay R. Kiriloskar – Director
N. Kumar – Director
Ranjith I. Jesudasen – Director
D.M. Choksi – Secretary
INDIAN COMPETITORS OF MRF LTD.
1. CEAT
2. APOLLO
3. J K TYRES
4. MODI
5. GOOD YEAR
6. DUNLOP
ORGANISATION STUDY Page 37
7. BRIDGESTONE.
ORGANISATIONAL GOAL
‘To maintain global standards through continuous improvement in the quality of products and services in
order to maintain market leadership’
AWARDS AND ACHIEVEMENTS
TNS
MRF voted the "Most Trusted" Tyre Company in India by TNS 2006 global CSR study.
J D POWER ASIA PACIFIC
MRF won the award for customer satisfaction not once but 6 times in the last 7 years.
CAPEXIL
MRF won the award for exports.
(MRF, 2010)
BRAND AMBASSADORS
Former brand ambassadors
Leading batsmen in world cricket - Sachin Tendulkar, Steve Waugh, and Brian Lara.
Current brand ambassadors
India - Gautam Gambhir, Rohit Sharma
Bangladesh
Ashrafull.
ORGANISATION STUDY Page 38
COMPANY’S PRODUCT PROFILE
Automotive tyres are main products of the company
Truck tyre – Tube tyre and Tubeless tyre
Light Truck tyre
Special tyre for defense
Tyre for industrial application
Agricultural tractor and tiller tyre
Off the road tyres – Solid tyres and earth mover tyres
Passenger tyre – Bias ply and radial
Two/ Three wheeler tyres
Specialized tyre for motor rallies
Non – tyre products
Automotive tubes
Flaps
Conventional tread rubber
Pre- cured tread rubber
Vulcanizing solution
Tyre repair materials
Conveyor belts
Toys
MRF metal coat
MRF wood coat
MRF glass coat
MRF velour
ORGANISATION STUDY Page 39
MRF auto coat
BEYOND TYRES
Paint & Specialty Coatings
MRF LTD. manufactures specialist coatings for a wide range of applications. Major MRF paints and
specialist coatings are:
MRF Metal Coat
MRF Wood Coat
MRF Glass Coat
MRF Vapocure
MRF Brass Coat
MRF auto Coat
FUNSKOOL TOYS
Funskool India Ltd. is a joint venture between MRF LTD. and Hasbro Inc., USA, the world’s largest toy
company. This plant is at Goa. The plant produces various models of toys.
MRF MUSCLE FLEX CONVEYOR BELTING
MRF LTD.’s collaboration with Pirelli came at a time when the Indian conveyor belting industry
was seeking technological momentum. MRF Muscle Flex offers several advantages to buyers of
belting in India. The conveyor belt is made from superior rubber compounds with better ageing
characteristics.
ORGANISATION STUDY Page 40
CORPORATE GOVERNANCE
MRF’s philosophy on corporate governance envisages the attainment of the highest level of
transparency, accountability and equity in all facts of its operations and all its interaction with its
stakeholder. In furtherance to the above company has compiled with the cores.
MRF – KOTTAYAM UNIT
MRF tyres, Kottayam are one of the most modern plants that were established in 1969 at
Vadavathoor about 7 km from Kottayam town in the state of Kerala. About 10 crores of land was purchased
in Vadavathoor village 1968 and the foundation stone for the factory building was made by late Sri.K.M.
Cherian, a factory building with in the area of 34200 sq.ft flat was constructed during the period of 1968 –
69 and Ban- bury of 3A size with a capacity of to mix of 10 meter per day was erected and commissioned on
21st July, 1969, with the strength of seven workmen, but presently it is most advanced technology mixing 10
and a full- fledged manufacturing unit providing work and technologies.
In the view of high productivity and very good performance in general, the mixing capacity was
enhanced by installing a second Ban-bury of 11 A size with a capacity to mix 48 meter per day during March
1970, with the permission of Goa Government A license to manufacture 4 lacks of automotive tube per
annum was transferred and started production of tubes with seven quarrying presses.
To enhance the mixing capacity Ban-bury of 1 ID size with a capacity of 54 meter per day was
established in 1972. The number of tube presses was increased to 45 presses. A fourth Ban-bury of 1 id size
was installed in 1978 to meet the increasing demand for mixing. At present 6000 tones of various
compounds are dispatched to different units. The level of the tube production has been increased technology
and now it has touched a level of 3 lakh number per month.
Another new product introduced in MRF Kottayam unit during 1993 was flap production. The
management also decided to stilt tyre production in Kottayam unit taking amount of the various incentives
on tax and power announced though a new industrial policy by the Kerala Govt. the tyre plant with an initial
ORGANISATION STUDY Page 41
plan to produce 200 numbers of tractors rear to 600 numbers of tractors front tyres per day inaugurated by
Chairman Sri. K.M.Mammen Mappilai on 30th May 1994.
The present turnover of finished goods of kottayam units is Rs. 350 crores per annum. Kottayam
units also started procured tread rubber (PCTR) production in August 1993. Their fourth place started in
1998.
The present lack of production is 450 mt of PCTR per month. Regarding repair materials accrued 70
mt of PCTR cushions ZEG cushions are manufactured and sent all over India. The working capital required
per month by the Kottayam unit constitutes more the Rs. 20 Crores. The company mainly goes for credit
transaction and the payment is made within one month time duration.
TRADE UNION
MRFEU - MRF Employee’s Union(CITU)
MRFEA – MRF Employee’s Association(INTUC)
PLANTS WITHIN KOTTAYAM UNITS.
The kottayam production unit of MRF has got four plants mainly
1. Tube Plant
2. Tyre Plant
3. Mixing Plant
4. PCTR Plant
Products at Kottayam Plant
ORGANISATION STUDY Page 42
Automotive tyres, tubes, conventional tread rubber, pre-cured tread rubber, repair materials, vulcanizing
solution, flap, bladder, envelope, curing bags and solid tyre.
1. AUTOMOTIVE TYRES
This is the basement on which the whole super structure of automobile rests. Here only conventional
or bias tyres of passenger, jeep, truck and farm tyres are manufactured.
2. AUTOMOTIVE INNER TUBE
This component is kept inside the tyre and when inflated, renders strength and impacts profile to the
tyre.
3. RETREADING RUBBER
It is the material used for retreading the tyre when it gets worn out on usage. These are of two types,
conventional and pre-cured tread rubber (PCTR).
4. TYRE REPAIR AND PCTR REPAIR MATERIALS
These include PCTR cushion, tread backing cushion. E.g. cushion used for the repair of tyre and
PCTR.
5. VULCANIZING SOLUTION
This is an aid for vulcanization and is used for retreading of tyres.
6. FLAP
ORGANISATION STUDY Page 43
This is kept in between the tubes and tyres. This serves as a protective sheath for the tube from the
external damages of the tyre and also as isolation medium, which filters the passage of the heat from
the tyre to the tube. This is generally used for bigger tyres.
7. BLADDER
This is an element used for curing of tyres, which carries the internal media and is mainly used for
captive consumption.
8. CURING BAGS / ENVELOPE
It is also used for retreading of tyres. It is spread as a layer over the tyre after application of PCTR
and it retains thermal input processes of manufacturing tubes and tyres.
9. MASTICATION
The Kottayam plant caters the stock requirement of all the other MRF LTD. units. Mastication is one
of the principal activities of the Kottayam unit. The stock generated is also used for captive
consumption. The main ingredients for mastication are polymer (rubber), carbon, chemicals and oils.
The process of making a homogeneous mixture is carried out in banburies and mills.
INTERNATIONAL CERTIFICATIONS
ORGANISATION STUDY Page 44
The Kottayam unit of MRF LTD. has got four different categories of International certifications from the
respected authorities. They are as follows:
1. ISO – 9001-2000 QUALITY MANAGEMENT SYSTEM
This is the quality management system and quality assurance standard brought into force by the
International Standard Organisation (ISO), a certification comprising of the state of the world facility
which aims at the standardization of the quality of the products and services to cater to the complete
satisfaction of the customer.
2. ISO – 14001-1996 ENVIRONMENT MANAGEMENT SYSTEM
This is the quality assurance standard prepared for the automobile and related companies. Through
this certification, MRF LTD. is to manufacture their products in an environment friendly and safe
manner.
3. ISO TS: 16949
Up gradation of ISO – 9000 from 1 July 2000. It is more customers oriented and works in plan-do-
check-act policy. TS – 16949 is awarded for certification of technical standards in this industry.
4. CQC
KOTTAYAM UNIT – FACTS AND FIGURES
ORGANISATION STUDY Page 45
Built-up area Six lakh square feet
Management staff 252
Regular workmen 1115
Casual workmen 399
Total finished goods production 3400 MT/ month
Total turnover of finished goods Rs.42 crores/ month
Mixed stock sent to other units 7000 MT/ month
Tyre production 52000 tyres/ month
Total production of tubes, envelopes and curing
bags
263000/ month
Flap production 82000/ month
Tread Rubber Production (conventional) 160 MT/ month
PCTR production 330 tonnes/ month
Repair materials 83 tonnes/ month
Vulcanizing solution 32500 liters/ month
Work timings
ORGANISATION STUDY Page 46
Work is carried out at the company 24 hours a day. There are three shifts in a day consisting of eight
hours each. Besides those shifts there is also a general shift for the management staff of the company. The
shift timings are as follows:
First shift : 7 am to 3 pm
Second shift : 3 pm to 7 am
Third shift : 11 pm to 7 am
General shift : 8 am to 4.30 pm
MARKETING
Tyre and tyre related products are sold under the brand mane “MRF”, and distributed in domestic
markets through sales offices, dealers, and franchisees. Conveyor Belts are sold under the brand name “MRF
Muscle Flex” to customers directly from Conveyor Belting plant at Arkonam.
The major OEM (Original Equipment Manufactures) customers of MRF tyre and Re Ford India Ltd.,
General Motors India Ltd., Maruti, Hindustan Motors, TATA Motors, Ashok Leyland,
Honda Siel, Hero Honda, Bajaj, LML Ltd, Honda Motors & Scooters India Ltd., Mahindra & Mahindra,
Eicher Motors, New Holland Volvo, etc. The major Conveyor Belting customers are Cement/ Steel /
Fertilizer / Thermal Power plants, mines and ports.
MRF exports tyres and tubes through authorized agents representing countries such as USA, Canada,
Mexico, Brazil, Chile, Australia, Philippines, Bangladesh, Sri Lanka, Korea, Egypt, Nigeria, South Africa,
Ghana, Kenya, Mauritius, UAE, Afghanistan, Pakistan, Iran, Iraq, Bahrain,-Qatar, Oman, Lebanon, Greece,
Turkey, Malta, UK, Uzbekistan etc. MRF conveyor belts are exported to Australia, South Africa, Europe,
Canada, Middle East etc.
ORGANISATION CHART OF MRF KOTTAYAM UNIT
ORGANISATION STUDY Page 47
EMBED Excel.Chart.8 \s
ORGANISATION STUDY Page 48
Electrical Maintenance Civil Engineering Mechanical Maintenance
General
Supervisor Time office
Security Officer
Quality Assurance Officer
Technical Officer
Assistant
Manager
Planning
Assistant
Manager
Accounts
Manager
Plant I
Plant II
Plant III
Plant IV
Guards
Technical Supervisor
Supervisor
Quality Assurance
SupervisorOperatorsStaff
Foreman
SupervisorWorkersOperatorsOperatorsWorkersStaff Supervisor
WorkersWorkers
Plant Engineering Manager
Plant Accounts Manager
Plant HR Manager
Plant Senior Security Officer
Plant Production Manager
Plant Industrial Engineering Manager
Plant Quality Assurance Manager
Plant Technical Manager
General Manager
DEPARTMENTS
DEPARTMENTS
ORGANISATION STUDY Page 49
MRF LTD gives an insight about the functioning of the different departments. Each department is headed by
the general manager who possesses expertise, knowledge in the area under his supervision. There always
exists an ergonomic atmosphere which is often made possible by the close interaction between all members
in each department. The top management moulds the strategies and policies that make sure that the middle
management implements them. Weekly interdepartmental meeting aims at bringing coordination between
the different departments. Open forums are held once in a week in all plants where the employees can raise
their concerns, suggestions etc…
The various departments headed at MRF Ltd Kottayam can be enlisted below;
Production department
Production Planning Department
Quality Assurance Department
Technical Engineering Department
Plant Purchase Department
Raw materials Store Department
Shipping (dispatch) Department
Accounts Department
Industrial Engineering Department
Safety Department
Security Department
Human Resource Department
1. PRODUCTION DEPARTMENT
Production is the primary function of the company and hence all other functions are support functions.
Production is carried out in four plants at kottayam unit.
ORGANISATION STUDY Page 50
They are
Tube plant plant 1
Tyre plant plant 2
Mixing plant plant 3
PCTR plant plant 4
The following are the main functions of production department.
Planning for production process
Every month, a monthly plan is given to the plant by central planning. Based on the monthly plan- planning department will prepare a simulation plan by dividing the month into 3 segments of 10 day each.
Material indent and receipt
The daily requirement of raw material is calculated at each plant after considering the available inventory and the schedule production for the next day raw material indented is made to raw material store.
Processing
Processing is carried out per the technical specification.
Product identification and traceability
Inspection
Structure of Production Department
ORGANISATION STUDY Page 51
SHAPE \* MERGEFORMAT
2. PRODUCTION PLANNING DEPARTMENT
ORGANISATION STUDY Page 52
Production Manager
Asst.Manager
Production Plant - II
Asst.Manager
Production
Plant - III
Asst.Manager
Production Plant - II
Asst.Manager
Production Plant - I
Operatives Operatives Operatives
Supervisor Supervisor Supervisor
Operatives
Supervisor
Production plan for the coming month will be issued form the Central Planning at Corporate office.
Based on this, plant planning in-charge will issue the monthly simulation plan to central planning, plant
production and to shipping. Based on the monthly plan and the inventory norms the monthly requirements of
raw materials and consumables will be prepared by plant planning and is sent to central planning, Corporate
purchase and to Raw material stores. Monthly requirement of raw materials is calculated from software and
it is validated every six months.
Based on the monthly simulation plan for the whole of kottayam unit, each plant make its own
simulation plan and indents required materials from raw materials stores. The simulation plan for 3 segments
of 10 days each is prepared and micro planning is done based on that.
Since the plant sends work-in-process materials to other plants, a simulation plan is also prepared for
work-in-process material production and is send to concerned departments of MRF units to which these in
process materials are sent. In case of any revision in monthly plan, the revised requirements and plan will be
sent to the concerned parties.
Production details report is sent to central planning on a daily basis for the previous day’s production.
Plan Vs Production report is published every 10 days and also on a monthly basis.
3. QUALITY ASSURANCE DEPARTMENT
Quality is considered as the most effective tool to improve productivity, to achieve cost
effectiveness, to improve profitability and market share and to remain competitive in the global market. In
the business environment of today, quality impacts not only the products and services but also many other
relevant entities such as process, systems, people and organisation.
ORGANISATION STUDY Page 53
A low level quality can be caused by the weakness either in the design of the product, or in its
manufacture. It is therefore appropriate to distinguish between quality of design and quality of manufacture.
Two products which have the same use but which are designed in different ways can
be of different quality of design. Quality of design is evident in the specifications to which the product will
be manufactured. A product may confirm in varying degrees to the specification. This varying degree of
confirmation to the specification will lead to varying degree of quality of manufacture.
Functions of Quality Assurance Department
Quality assurance department’s primary aim is customer satisfaction. Hence its prime duty is to
ensure that all customer complaint should be taken seriously and is to be communicated to all
concerned. Problem solving tools are employed to ensure that the problem is solved and error
proofing methods are adopted to ensure that such problems don’t occur again.
Improve the profitability of the company by reducing defects and waste generation. This is done by
initiating projects for waste reduction and forming task forces for close follow up. Specific targets
are fixed in each area for waste reduction and forming task forces for close follow up. Specific
targets are fixed in each area for waste reduction and quality improvement and it is done in co-
ordination with all other connected departments.
The main function of quality assurance department is process audit and final product inspection.
This will include monitoring the inspection status of incoming materials, in-process materials,
process parameters and finished product inspection. Ensuring identification and traceability of all
materials is also the function of QA.
Educating workmen on Quality Standards and the consequences of not following quality norms is
also done.
ORGANISATION STUDY Page 54
Audits on suppliers and outside godowns are conducted periodically to ensure the materials are of the
required quality and also to ensure that they are stored in the proper manner.
Whenever a finished product is returned to the factory due to any defect those products are inspected, the
reasons found out and communicated to everybody concerned. It is then disposed in a suitable manner
and recorded.
Slow moving and non-moving items are tracked at regular intervals to avoid material getting
deteriorated due to prolonged storage and to avoid producing material which is not needed by the
market.
Quality Policy of MRF
The quality policy of MRF is to maintain market leadership through continuous quality
improvement. To achieve this goal, all the MRF plants and the corporate office shall pay particular
attention to the following:
Product process improvement by field or plant performance monitoring and prompt service to the
customer
Upgradation of machinery to meet the increasing needs of the customer.
Continuous training of all employees in order to acquire necessary skills and knowledge.
ORGANISATION STUDY Page 55
Structure of Quality Assurance Department
ORGANISATION STUDY Page 56
Quality Assurance in
Charge Plant I
SupervisorSupervisor
Quality Assurance in Charge Plant IV
Quality Assurance in
Charge Plant II
Operators
Supervisor
Quality Assurance in Charge Plant III
Supervisor
Operators Operators Operators
Manager Quality Assurance
TECHNICAL DEPARTMENT
Technical department at the corporate level carries out R&D activities and the results of those activities
are transferred to the plants. Some of the activities carried out at corporate technical are new moulds,
selection and evaluation of new and alternative sources, selection and evaluation of alternative materials,
finished product testing and analysis, heat engineering and assisting plants in problem solving.
The results of research and developments are translated into practical applications at the plant level. At the
same time, other routine functions like testing of incoming materials, process monitoring and product testing
at each stage is also carried out.
Activities
1, New product development.
2, New compound development.
3, Designing and inspection of new moulds.
4, Selection & Evaluation of new alternative source.
5, Selection and evaluation of alternative.
6, Finishes product listing and analysing.
7, Arresting plants in problem solving.
Raw Material Testing
All raw materials are tested and released if they confirms to the specifications. When the material is
received, raw material stores personnel arrange for collection of samples from the received material as per
ORGANISATION STUDY Page 57
sampling plan. The sample is given to raw material testing lab along with sample transfer note/ visual
inspection report.
Raw materials are tested as per BSP (Basic Standard Practices), standard test procedure and are
compared with the specification issued by corporate technical. If the material does not confirm to
specification, more samples are tested and released if it is OK. If any of the re-tested samples are not OK,
then the samples are sent to corporate lab and the material is accepted or rejected based on corporate advice.
If the material is rejected, then raw material rejection note is prepared and the material is returned to the
supplier by raw material stores.
In-Process Material Testing
In process materials are tested by technical as per the plan to check whether any deviation from the
specification has happened either in the material used or in the process.
Finished Product Testing
Finished product testing is done both in the plant and at corporate technical departments. This is done
to ensure that the product produced confirms to the required standards. In case of tyres, ply adhesion,
mounted tyre dimension, and cut tyre analysis are done in the plant. For PCTR and flap, cured dimensions
and weight are checked.
Process Control
Process control is effected by checks or tests conducted regularly. The data generated during tests and
audits are used to control the process. Changes are made if required in the specifications to achieve process
ability targets, the changes are documented through plant changes letters.
ORGANISATION STUDY Page 58
If there is any problem, the process / product will be analyzed for variations in raw materials, or
process conditions. Any deviation found will be corrected or alternative source of raw material will be tried.
Process will be repeated to check whether it is OK.
New Product Introduction
Whenever a new product is introduced, a TPOR (Technical Programme Opening Report) is received
from corporate technical along with corporate specification, project schedule and new size production plan.
Based on the TPOR, a micro plan will be prepared by Head- plant technical and it will be approved by the
originator of TPOR. This is then given to the concerned technical in-charge who prepares the activity plan.
Plant specification is generated based on the corporate specification.
Analysis of the finished products is done and necessary corrections if any are incorporated into the
specification. The product is released for re-evaluation or for completion of the project schedule. The
product is sent for in-plant testing, corporate testing and performance report is published. The performance
during bulk evaluation is published. Then if it is satisfactory, the product is released for regular production in
consultation with corporate technical, and is documented through a TA (Technical Authorization) or PLC
(Plant Change Letter).
Control Of Non-Conforming Product
It is the responsibility of technical department to dispose of the non-conforming materials in
suitable manner. Non conforming materials are tied with a red tag (non conforming material tag) which
contains all the relevant details like the MRF code of the held material, quantity, reason for holding, date and
shift of production, date and shift of holding etc.
ORGANISATION STUDY Page 59
Technical in-charge reviews the non-conformance and takes a decision on the method of disposal and
this is recorded on the non conforming material tag. The disposal is then followed up by production.
Tool Change
Whenever there is a tool change the concerned specification is given by plant technical department. In
case of a new size tool, it has to be Okayed by technical before being put in production.
Finished Product Re-Classification
Finished products which don’t confirm to first quality norms are kept separately are jointly inspected by
production, technical and quality assurance. Based on joint decision, the material is either sent as seconds,
repaired or scrapped.
ORGANISATION STUDY Page 60
Structure of Technical department
ORGANISATION STUDY Page 61
Manager Plant Technical
Technical in Charge Plant I
SupervisorSupervisor
Technical n Charge Plant IV
Technical In charge Plant II
Workmen
Supervisor
Technical in Charge Plant III
Supervisor
Workmen Workmen Workmen
PLANT PURCHASE DEPARTMENT
The items purchased by the plant can be categorized as follows:
a) Items which come under the head capital expenditure.
b) Items which come under engineering spares(non capital expenditure)
c) Stationery and miscellaneous items (items which don’t come under the preview of raw
materials)
d) Services (Repairing of machinery)
Procedure followed for purchase
Any person who needs a material can make a purchase requision but it has to be authorized by the
department head. This has to be routed through engineering store.
In case of items involving capital expenditure, it should have capital authorization number. In case of
engineering spares of non capital nature, this is not required. Based on the indent, necessary quotations are
invited and purchase orders are released. The copy of purchase order is sent to the supplier, intender,
accounts, stores, corporate office PEM and a file copy for plant purchase.
ORGANISATION STUDY Page 62
RAW MATERIAL STORES DEPARTMENT
Raw material stores will receive a copy of the raw material requirement for the month prepared and
sent by plant planning. This is also sent to central planning and central purchase by plant planning. Based on
the requirement, central purchase arranges for procurement of materials and issues a delivery schedule to the
plant. Delivery schedule is the schedule by which the supplier will release the specified dates to the plant.
Raw materials, consumables, fuel etc are received at the factory gate in line with the delivery schedule
and purchase orders. The documents are verified to ensure that the materials are from approved sources and
the correct quantity as is delivered.
Weighment of the load is done. Goods arrival entry is made and the load is re-directed to the
unloading point through the security department. The unloading point is usually the raw material godown,
but sometimes the materials are unloaded at the plants where it is consumed. In case of fuel, oil etc it is
unloaded at the storage area.
At the unloading point, visual inspection is carried out and then the materials are stored with proper
identification tags showing the primary status of the material (hold/ pending for test).Each material has a
specified storage place and it is placed in that storage area.
Sample transfer / visual inspection report is prepared and samples are collected for testing as per the
documented sampling plan. The sampled bag is identified and the sample is sent to technical department for
testing .GRN (Goods Received Note) is prepared at this point.
After testing the samples, technical department informs the test result through material release /
rejection / hold note printed at the bottom portion of the transfer /visual inspection report. Based on the test
result ,green color sicker captioned “OK” is affixed if the material is OK, Red color sticker captioned
“REJECTED” is affixed if the material is not fit for use and ORANGE color sticker captioned “HOLD” is
affixed if it needs further tests to arrive at a concrete decision.
Materials are issued to production as per the indent raised by production in each plant .Stock
inventory and stock back to the supplier and the cost recovered .Transferring of materials to other plants is
also monitored.
ORGANISATION STUDY Page 63
SHIPPING (DESPATCH) DEPARTMENT
Finished goods will be received from inspection/ packing area size wise, batch wise or lot wise on the
basis of production Transfer Note. Physical verification of goods is done at the time of receipt and receipt
tags are put. Proper storage and identification of finished goods is the responsibility of shipping department.
Finished goods will be stored size wise on pallets with transfer slips showing the size, quantity, date of
receipt etc. Tractor rear tyres .truck tyres and such others will be stacked on floor. Stacking norms for
finished goods, where ever specified will be followed.
Shipping will publish Daily Dispatch Simulation Plan. And copies of it will be sent to plant
planning, central planning and QAD. Daily Dispatch plan is prepared based on simulation plan, allocation
plan and urgency as intimated by central planning /marketing, transportation time required, availability of
truck, shelf life of the product etc. Trucks are checked before loading to ensure that damages will not occur
to goods.
Daily production Receipts and transfer are fed into computer and reports are generated. Daily details
are transmitted to central planning /EDP/Marketing and data are consolidated for report generation and
monitoring .Dispatch report is published for every 10 day period .Non moving /slow moving items report is
published monthly and distributed to central planning ,plant planning ,QA ,plant head, marketing etc.
Shipping coordinates with central planning to get allocation for none moving and slow moving items. Tread
rubber /cushion which exceeds the shelf life of 3 months and damaged products /tyres packed with wrong
tubes will be given to production.
Statutory registers and returns as required are properly maintained and submitted. New defective
tyres are brought for tyres for repairs from outside godowns and inspections by central exercise authorities
are arranged .Statutory registers and returns as required are properly maintained and submitted.
ORGANISATION STUDY Page 64
ACCOUNTS DEPARTMENT
The Functions of accounts department at the plant level have been divided into
1, Financial account
2,Cost account
3, Wages and Salaries
4, Sales tax
Internal source
share capital
Reserves and surplus
External source
Banks.
Application of funds
Fixed asset
Investment
Current asset.
Loans & Advance.
Financial Accounts
This branch deals with all types of cash payments and receipts. This will include payment for
engineering and raw materials purchase, petty cash payments, operation and reconciliation of bank
ORGANISATION STUDY Page 65
accounts ,payment to the government in the form of taxes and levies ,payment of PF ,deduction from salary
and payment of loan outstanding and insurance premium of employees ,fright payments, payment in lieu of
travel allowance ,medical re imbursement etc. Cash receipts in the case of scrap sales and any other cash
receipt will also come under this branch of accounts.
Cost Accounts
This branch deals with forecasting ,budgeting, analyzing and reporting the income and expenditure of the
company .The budget for expenditure is prepared using standard costing principles and it is compared with
the actual expenditure .Any variation from the budget is analyzed to find the exact reason and it is reported
to the top management.
ORGANISATION STUDY Page 66
STRUCTURE OF ACCOUNTS AND FINANCE DEPARTMENT
ORGANISATION STUDY Page 67
Plant Account Manager.
Manager Raw Materials
Asst .Mgr Plant Accounts
Asst. Mgr. Engineering Stores
Officer Shipping
Officer Engineering Purchase
SupervisorsSupervisors Supervisors
Supervisors
Wages Officer
Costing Officer
Auditing Sales tax & Excise
Materials Handling Workmen
Supervisors
Supervisors
Sales Tax
All matters related to sales tax are handled by this section. Monthly returns for sales tax are filed on
behalf of sales depots. VAT (Value Added Tax) system has been introduced and all matters related to this
are also looked after by this branch of accounts. “C” forms for purchases from outside the stare and “F”
forms are issued for receipt of goods from depots.
ENGINEERING DEPARTMENT
Engineering department functions are divided into Mechanical, Electrical, Instrumentation, Civil &
Environmental engineering. The main functions are new machinery lay out preparation ,erection and
commissioning of new machinery ,preventive maintenance, breakdown maintenance, condition monitoring
and over hauling of machinery and other related equipments.
Erection ,commissioning ,operation and maintenance of utility items like generator ,boilers,
compressors, pumps, freezer lines and cooling towers and maintenance of material handling systems like lift,
hoist and gantry are done by engineering. The maintenance of equipments at pump house and training
centers are also done.
MECHANICAL MAINTENANCE
Preventive maintenance schedule for the particular week is taken and the necessary materials ,tools,
manpower and spares are arranged .The scheduled maintenance activities are carried out based on work
instructions and experience.
Based on the number and nature of breakdowns in each machine during the year, the preventive
maintenance schedule is reviewed and a new schedule is prepared for the next year.
ORGANISATION STUDY Page 68
BREAKDOWN MAINTENANCE
The defective machinery is identified either by production or by engineering and a maintenance request
is generated and arranges for the tools, maintenance personnel and spare parts. The machine is then released
for maintenance. The required maintenance jobs are carried out and the machine is thoroughly checked. If
the machine is OK, then it is handed over to production. Otherwise necessary corrections are again done.
Every month, down time analysis is done and permanent corrective actions are initiated in case of
recurring failures. Mean time between failure and mean time to repair are the measures adopted to track the
improvement.
INDUSTRIAL ENGINEERING.
Major Activities
Conducting studies for fixing Standards and Crew Strength in all areas.
Negotiating of disputes by participating.
Participating in discussions for setting labour disputes
Manpower requirement assessment
Planning o Factory Layout
Expansion Project Coordination
Preparation and publication of MIS Reports
Works related to long term agreement.
computation of production bonus
Resource planning – manpower, machinery and equipments
Long term agreement related works
Calculation of chairman’s award
Calculation of production bonus
ORGANISATION STUDY Page 69
Connectivity between factories. head office and others plants, maintenance of network
connectivity in all areas of the plant, administration of local e-mail service, maintenance of
computers, printers other accessories.
ERP Activities – Maintenance of leased line connectivity between factory and head office and other plants,
maintenance of network connectivity in all areas of the plants, maintenance of network connectivity in all
areas of the plant, administration of local e mail service ,maintenance of computers printers and other
accessories.
ERP SYSTEMS in MRF Ltd was replaced by SAP systems in 2009
STRUCTURE OF INDUSTRIAL ENGINEERING DEPARTMENT
ORGANISATION STUDY Page 70
Plant Industrial Engineering Manager
Recourse Panning in Charge
Assistant Manager Industrial Engineer
SAFETY DEPARTMENT
Responsibility of this department is to ensure the working ambience to all the personnel within the
factory and the premises. The safety officer through the mechanism of audits and subsequent reporting –
Feedback, builds in the safety consciousness and the safety culture within the personnel.
MRF has a well defined SAFETY AND HEALTH POLICY which is as follows.
“It is the policy of our company that the SAFETY AND HEALTH of our employees shall be our
FIRST priority”
“It is the responsibility of everyone in this organisation, regardless of the position he occupies, to
ensure that everyone in the factory returns home to his beloved ones without any injury today and every day”
“We shall observe this policy not only in letter but also in spirit and offer “ACCIDENT FREE SAFE
PRODUCTION” for the benefit of one and all.
Safety policy of MRF
It is the policy of the company that the safety and health of all employees shall be given the FIRST
priority.
It is the responsibility of everyone in the organisation, regardless of the position he occupies, to ensure
that everyone in the factory returns home to his beloved ones without any injury today and every day.
They shall observe this policy not only in letter but also in spirit and offer “ACCIDENT FREE SAFE
PRODUCTION” for the benefit of one and all.
ORGANISATION STUDY Page 71
Procedures and guidelines
Necessary procedures, rules and guide lines for the effective implementation of this policy, without
prejudice to the statutory requirements, are formulated by Chief Safety officer and Plant Safety officer. They
will also render necessary advice and assistance to all management staff in the effective implementation of
these policy respective sections, plants departments and the unit as a whole.
SECURITY DEPARTMENT
Industrial safety in the public and private sector can be defined as protection of men, materials,
machines, buildings, classified information, and the company operations and to provide protective services
against fire, theft, damage to the company assets and the installation. Protect the valuables of the company as
well of the employees.
The main functions of security department are:-
Control over accessibility
Check against theft, pile rages
Control over the movement of personnel and materials at the gate
Checking in/out raw materials, empty vehicles, carrying finished goods, vehicles carrying scrap
items etc.
Control and checks on the company hired taxes and security of bills.
Co-ordination of security duties with private security agencies and preparation of bills.
Control and check over the entry of contract works.
In case of an accident in the factory, it is the responsibility of the security department to provide the
victim with first aid. The security department should also take them to the appropriate place by using the
ambulance if necessary. The inflow and outflow of inventory, personnel are regulated and monitored by the
security department.
ORGANISATION STUDY Page 72
Structure of Security Department
ORGANISATION STUDY Page 73
SENIOR SECURITY OFFICER
Officer Security
Watchmen Firemen
HUMAN RESOURCE DEPARTMENT
The Human Resource Department is known as the heart of an organisation. It performs a number of
activities concerned with the employees of their organisation. It interacts with other departments to ensure
effectiveness of the company.
ORGANISATION STRUCTURE OF HR DEPARTMENT
ORGANISATION STUDY Page 74
Plant Human Resource Manager
Deputy Manager –
Human Resources
Officer of Human Resource.
Canteen Supervisor
Welfare Office& Family Welfare Co-ordinate
Time Officer Training officer
The function of the Human Resource Department includes:
Any employee newly recruited will be exposed to the following areas.
Introduction about the company
Evolution of the concept of quality and its relevance to the contemporary industrial production
Safety
External competitive environment and organizational culture
Factory discipline
Basic process flow in the plant in which they are place.
The following are the various activities being undertaken in taken in HR Department
1. Recruitment and Selection of employees
2. Performance Appraisal
3. Welfare activates
4. Training
ORGANISATION STUDY Page 75
5. Industrial relation and labour management
6. Canteen service
7. File management.
Other activities controlled by HR Department are
Medical insurance scheme
Family welfare canteen
Co-operative Society
Recreation club
OFFICE TIME
The office time is also come under the HR Department. The office time carries out the following function.
Attendance detail
Leave details
Wage calculation
Daily reports.
Working hours
First shift : 7am-3pm
Second shift : 3pm-11pm
Third shift : 11pm-7am
General shift : 8am-4.30pm
ORGANISATION STUDY Page 76
CHAPTER 4
SWOT ANALYSIS
ORGANISATION STUDY Page 77
SWOT ANALYSIS
The SWOT Analysis have revealed the strength, weakness, opportunities, and threats of the company. It has
been detailed below:
STRENGTH
Unique Brand Name.
Good infrastructure.
Computerized system.
Locally available raw material.
Environment certification (ISO 14001)
Quality product (ISO 9000 certification)
Highly evolved Research and Development wing
Training to all the employees.
Aggressive marketing Policies.
Latest technology and concepts.
ORGANISATION STUDY Page 78
Experienced work force.
Wide spread recognition.
Quality control.
Harmonious relations between workers.
Largest tyre manufacturers in India.
Strong financial support.
Good and efficient distribution network.
WEAKNESS
Lack of speedy communication.
highly motivated Union problems.
High rate of absenteeism.
Marketing department is only at corporate office.
Lack of individual initiative.
ORGANISATION STUDY Page 79
Less interaction between manufacturing and marketing department.
Lack of commitment.
OPPORTUNITIES
Modernization of tubeless tyres.
World class products.
Joint ventures or tie-up with foreign automobile companies.
More opportunities for diversification.
Global standards and competition.
Improvement in market share both in India and outside.
Availability of latest technology
THREATS
Competitions.
Market Risks.
Cheap import from China.
ORGANISATION STUDY Page 80
rupee depreciation resulting in lower export realization
Changing technology.
Entrance of new players.
Cost of raw materials.
Increasing transportation cost.
ORGANISATION STUDY Page 81
CHAPTER 5
FINDINGS, SUGGESTIONS AND CONCLUTION
ORGANISATION STUDY Page 82
FINDINGS, SUGGESTIONS AND CONCLUSION
FINDINGS
• MRF ltd. Is the no. 1 largest tyre manufacturer in the country and the 12th largest in the world.
• MRF exports its products to more than 75 countries worldwide.
• MRF is the first Indian company to export tyre to the US.
• The company is providing good working environment.
• MRF is the first company in India that manufacture and market Nylon tyres, passenger tyres
commercially.
• Profit is comparatively low because of the rapid variations in the cost of the raw materials.
SUGGESTIONS
The management must take sufficient step to install a grievance settlement machinery with sufficient participation of workers
ORGANISATION STUDY Page 83
Improve employee relation.
Open a show room at factory itself.
The company need to move and update itself according to new technologies in the
market to maximize quality production.
The company should utilize railways to transport its materials which would
reduce the overall logistics cost.
More attractive advertisements in Visual Media would help in Marketing
More investment has to be made in Research and Development.
ORGANISATION STUDY Page 84
CONCLUSION
Madras Rubber Factory mobilized itself as the market leader. The strong performance
of MRF is because of combined efforts of management and employees. MRF provides high quality and
technologically superior products to its customers. The company has the provision to find out which tyre is
manufactured by which worker. The effective management along with successful workers is very dedicated
and is aware of new developments taking place in the industry. There is “no compromise on the quality
policy” makes them King of Kings in tyre industry. If they implement the suggestion put forward, will help
them to improve profit and helpful for the workers. So the company can attain global standard through
continuous improvement in the quality products and service in order to maintain market leadership and can
be the king in tyre industry for many years.
ORGANISATION STUDY Page 85
BIBLIOGRAPHY
1. Kothari C R, Research Methodology, Vishwa Prakashan, New Age International(P)Ltd ,New Delhi,
Second Edition
2. Dr. D D Sharma, Marketing Research, Sultan Chand and Son, Educational Publishers, New Delhi.
3. L M Prasad, Organisational Behavior, Sultan Chand and Sons, Educational Publishers, New Delhi.
Company Website;
HYPERLINK "http://www.mrftyre.com" www.mrftyre.com
www.fadaweb.com/indiantyresindustry.htm
http://www.mrftyres.com/aboutus/awards.html
Company journals and magazines.
ORGANISATION STUDY Page 86
ORGANISATION STUDY Page 87