msg-2174 msg-2175 - 計測技術研究所msg-2170/2173 and achieved cost reduction. as for rds...

1
5 6 MSG-2174 MSG-2174 MSG-2175 MSG-2175 FM Multiplex Signal Generator (RDS/RBDS,DARC/RTIC) FM Multiplex Signal Generator (RDS/RBDS,DARC/RTIC) MSG-2174 is an FM multiplex signal generator adopted a multiple module method. Combination of DARC modulator, RDS modulator, and FM stereo modulator can be chosen depending on usage of user. DARC-VICS/RTIC FM multiplex method and RDS/RBDS FM multiplex method are available by this one unit, moreover a stereo modulator can be installed in same casing. By using application software attached to this unit, new data can be created and edited by a PC simply. This unit can output the data by being downloaded. Regarding DARC encoder function, we reduced its size by modifying Basic specifications of MSG-2170/2173 and achieved cost reduction. As for RDS function, usability for production line was prioritized because it is an existing method. MSG-2175 is an FM multiplex signal generator equipped with function for stereo modulating as standard. RDS/RBDS and DARC modulators can be combined by user’s needs. By using application software attached to this unit, new data can be created and edited by a PC simply. This unit can output the data by being downloaded. Basic specifications Basic specifications ■RDS/RBDS, DARC, and Stereo modulator can be combined freely. ■MSG-2175 allows combination which matches user's needs.(RDS/DARC) Composite output signal Output level Max. 3.00Vp-p(0.00 ~ 3.00 0.01V step) S/N ratio 80dB< Output impedance 75Ω External signal mixing input Input frequency range 30Hz ~ 100kHz Input/Output gain 1.0(+0, -0.5dB) Input impedance 10kΩ Pilot input Input level range 1.0Vp-p~3.0Vp-p Input impedance 10kΩ Input data/clock Input level range TTL Input impedance 10kΩ Frequency lange 70MHz to 110MHz Setting resolution 100Hz Frequency accracy +/-5×10⁻⁶ Output level range -20 to 126dBµV(EMF) Output Resolution 0.1dB step Output level accracy +/-1.5dB Output impedance 50Ω VSWR 1.3 or less Spurious Harmonics -30dBc or Lower Spurious Resolution -40dBc or Lower Output level Max. 3.57Vp-p : 3.0p-p=75kHz(100%) Pre-emphasis : OFF Output level setting 0 to 125% (0.5% step) Internal modulation frequency 400Hz,1kHz,6.3kHz,10kHz,15kHz,EXT. Modulation mode L&R,MONO,MAIN,LEFT,RIGHT,SUB,OFF Pre-emphasis OFF,25µs,50µs,75µs Frequency characteristics 30Hz to 15kHz +/-0.2dB Separation 55dB > Distortion 0.02% < (Output 3Vp-p,DEV. 100% ,at MONO) S/N ratio 80dB > Pilot signal 19kHz +/- 1Hz Output level setting 0 to 15% (1% step) Pilot output 1.0Vp-p Output level setting 0 to 125% (0.5% step) Internal modulation frequency 400Hz,1kHz,6.3kHz,10kHz,15kHz Modulation mode OFF,L=R,L&R,L=-R,LEFT,RIGHT,MONO Pre-emphasis OFF,25µs,50µs,75µs Frequency characteristics 30Hz to 15kHz +/-0.2dB Separation 55 d B > S/N ratio 74dB > Pilot signal 19kHz +/- 1Hz Output level setting 0 to 15% (1% step) Serial interface RS-232C: D-sub 9pin (male), USB : Type B Parallel interface GP-IB (Compliant with IEEE Std. 488-1975) Serial interface RS-232C: D-sub 9pin (male), USB : Type B Parallel interface GP-IB (Compliant with IEEE Std. 488-1975) Power requirements AC 90 to 240V50/60Hz Power consumption Max. 20VA (Full-featrued product) Dimensions Approx. 420(W) × 100(H) × 350(D)mm Weight Approx. 5kg Operating temp range 0℃ to +40℃ Performance Guarantee +10℃ to +35℃ Power requirements AC 90 to 240V 50/60Hz Power consumption Max. 20VA (Full-featrued product) Dimensions Approx. 420(W) × 100(H) × 370(D)mm Weight Approx. 5kg Operating temp range 0℃ to +40℃ Performance guarantee range +10℃ to +35℃ RDS Increasing frames Output level Max. 300mVp-p : 3.0Vpp=75kHz(100%) Output level setting 0.0 to 10.0% (0.1% step) Subcarrier frequency 57kHz +/-2Hz Subcarrier distortion 0.1% < (Output 3Vp-p ,DEV. 10%) Data modulation mode DPSK 1.1875 kbps External data/clock input TTL Bit error rate PN9 Records 00 to 10 (00 fixed pattern) Output level setting 0.0 to 10.0% (0.1% step) Subcarrier frequency 57kHz +/-2Hz Data modulation mode DPSK 1.1875 kbps External data/clock input TTL Bit error rate PN9 Records 00 to 10 (00 fixed pattern) Output level Max. 450mVp-p : 3.0Vp-p = 75kHz(100%) L-MSK level control Auto/Manual switching AUTO Upper limit : 10.0% ,Lower limit : 4.0% MANUAL 0.0 to 15.0% (0.1% step) Subcarrier frequency 76kHz +/-2Hz Subcarrier distortion 0.1% < (Output 3Vp-p,DEV. at 10%) Data modulation mode LMSK 16kbps Frequency shift : +/-4kHz External data/clock input TTL Bit error rate PN9 Records 00 to 10 (00 fixed pattern) L-MSK level control Auto/Manual switching AUTO Upper limit : 10.0% ,Lower limit : 4.0% MANUAL 0.0 to 15.0% (0.1% step) Subcarrier frequency 76kHz +/-2Hz Data modulation mode LMSK 16kbps Frequency shift : +/-4kHz External data/clock input TTL Bit error rate PN9 Records 00 to 10 (00 fixed pattern) 1.Main frame 1. RF signal output 4. Stereo Modulator 4. Stereo Modulator 5. Interface 5. Interface 6. General Data 6. General Data 7. Option 2. RDS (RBDS) 2. RDS(RBDS) 3. DARC(RTIC) 3. DARC(RTIC) −Customizable combination− USB USB USB USB RS-232C RS-232C RS-232C RS-232C GP-IB GP-IB GP-IB GP-IB 1. Only DARC modulator 2. Only RDS/RBDS modulator 3. DARC & Stereo modulators 4. RDS/RBDS & Stereo modulators 5. Only Stereo modulator 6. DARC & RDS 1. Only DARC modulator 2. Only RDS/RBDS modulator Example of Bit Error Rate measuring RF RF RF RF GP-IB/RS-232C/USB DATA CLOCK DATA CLOCK PC PC MSG−2175 MSG−2174 MSG−2175 MSG−2174 GP-IB/RS-232C/USB DUT DUT AM/FM Signal Generator AM/FM Signal Generator MAS-8420 / MAS-8400 MAS-8420 / MAS-8400 Configuration example of FM Multiplex signal capture Signal Generators Signal Generators General General Features Features

Upload: others

Post on 12-Feb-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MSG-2174 MSG-2175 - 計測技術研究所MSG-2170/2173 and achieved cost reduction. As for RDS function, usability for production line was prioritized because it is an existing method

5 6

MSG-2174 MSG-2174MSG-2175 MSG-2175FM Multiplex Signal Generator

(RDS/RBDS,DARC/RTIC)FM Multiplex Signal Generator

(RDS/RBDS,DARC/RTIC)

MSG-2174 is an FM multiplex signal generator adopted a multiple module method.Combination of DARC modulator, RDS modulator, and FM stereo modulator can be chosen depending on usage of user.DARC-VICS/RTIC FM multiplex method and RDS/RBDS FM multiplex method are available by this one unit, moreover a stereo modulator can be installed in same casing.By using application software attached to this unit, new data can be created and edited by a PC simply.This unit can output the data by being downloaded.Regarding DARC encoder function, we reduced its size by modifying Basic specifications ofMSG-2170/2173 and achieved cost reduction.As for RDS function, usability for production line was prioritized because it is an existing method.

MSG-2175 is an FM multiplex signal generator equipped with function for stereo modulating as standard.RDS/RBDS and DARC modulators can be combined by user’s needs.By using application software attached to this unit, new data can be created and edited by a PC simply.This unit can output the data by being downloaded.

Basic specifications

Basic specifications

■RDS/RBDS, DARC, and Stereo modulator can be combined freely.

■MSG-2175 allows combination which matches user's needs.(RDS/DARC)

Composite output signalOutput level Max. 3.00Vp-p(0.00 ~ 3.00 0.01V step)S/N ratio 80dB<Output impedance 75Ω

External signal mixing inputInput frequency range 30Hz ~ 100kHzInput/Output gain 1.0(+0, -0.5dB)Input impedance 10kΩ

Pilot inputInput level range 1.0Vp-p~3.0Vp-pInput impedance 10kΩ

Input data/clockInput level range TTLInput impedance 10kΩ

Frequency lange 70MHz to 110MHzSetting resolution 100HzFrequency accracy +/-5×10⁻⁶Output level range -20 to 126dBµV(EMF)Output Resolution 0.1dB stepOutput level accracy +/-1.5dBOutput impedance 50ΩVSWR 1.3 or lessSpurious Harmonics -30dBc or LowerSpurious Resolution -40dBc or Lower

Output level Max. 3.57Vp-p : 3.0p-p=75kHz(100%) Pre-emphasis : OFFOutput level setting 0 to 125% (0.5% step)Internal modulation frequency 400Hz,1kHz,6.3kHz,10kHz,15kHz,EXT.Modulation mode L&R,MONO,MAIN,LEFT,RIGHT,SUB,OFFPre-emphasis OFF,25µs,50µs,75µsFrequency characteristics 30Hz to 15kHz +/-0.2dBSeparation 55dB >Distortion 0.02% < (Output 3Vp-p,DEV. 100% ,at MONO)S/N ratio 80dB >Pilot signal 19kHz +/- 1HzOutput level setting 0 to 15% (1% step)Pilot output 1.0Vp-p

Output level setting 0 to 125% (0.5% step)Internal modulation frequency 400Hz,1kHz,6.3kHz,10kHz,15kHzModulation mode OFF,L=R,L&R,L=-R,LEFT,RIGHT,MONOPre-emphasis OFF,25µs,50µs,75µsFrequency characteristics 30Hz to 15kHz +/-0.2dBSeparation 55 d B >S/N ratio 74dB >Pilot signal 19kHz +/- 1HzOutput level setting 0 to 15% (1% step)

Serial interface RS-232C: D-sub 9pin (male), USB : Type BParallel interface GP-IB (Compliant with IEEE Std. 488-1975)

Serial interface RS-232C: D-sub 9pin (male), USB : Type BParallel interface GP-IB (Compliant with IEEE Std. 488-1975)

Power requirements AC 90 to 240V50/60HzPower consumption Max. 20VA (Full-featrued product)Dimensions Approx. 420(W) × 100(H) × 350(D)mmWeight Approx. 5kgOperating temp range 0℃ to +40℃Performance Guarantee +10℃ to +35℃

Power requirements AC 90 to 240V 50/60HzPower consumption Max. 20VA (Full-featrued product)Dimensions Approx. 420(W) × 100(H) × 370(D)mmWeight Approx. 5kgOperating temp range 0℃ to +40℃Performance guarantee range +10℃ to +35℃

RDS Increasing frames

Output level Max. 300mVp-p : 3.0Vpp=75kHz(100%)Output level setting 0.0 to 10.0% (0.1% step)Subcarrier frequency 57kHz +/-2HzSubcarrier distortion 0.1% < (Output 3Vp-p ,DEV. 10%)Data modulation mode DPSK 1.1875 kbpsExternal data/clock input TTLBit error rate PN9Records 00 to 10 (00 fixed pattern)

Output level setting 0.0 to 10.0% (0.1% step)Subcarrier frequency 57kHz +/-2HzData modulation mode DPSK 1.1875 kbpsExternal data/clock input TTLBit error rate PN9Records 00 to 10 (00 fixed pattern)

Output level Max. 450mVp-p : 3.0Vp-p = 75kHz(100%)L-MSK level control Auto/Manual switchingAUTO Upper limit : 10.0% ,Lower limit : 4.0%MANUAL 0.0 to 15.0% (0.1% step)Subcarrier frequency 76kHz +/-2HzSubcarrier distortion 0.1% < (Output 3Vp-p,DEV. at 10%)Data modulation mode LMSK 16kbps Frequency shift : +/-4kHzExternal data/clock input TTLBit error rate PN9Records 00 to 10 (00 fixed pattern)

L-MSK level control Auto/Manual switchingAUTO Upper limit : 10.0% ,Lower limit : 4.0%MANUAL 0.0 to 15.0% (0.1% step)Subcarrier frequency 76kHz +/-2HzData modulation mode LMSK 16kbps Frequency shift : +/-4kHzExternal data/clock input TTLBit error rate PN9Records 00 to 10 (00 fixed pattern)

1.Main frame

1. RF signal output

4. Stereo Modulator

4. Stereo Modulator

5. Interface

5. Interface

6. General Data

6. General Data

7. Option

2. RDS (RBDS)

2. RDS(RBDS)

3. DARC(RTIC)

3. DARC(RTIC)

−Customizable combination−USBUSB USBUSBRS-232CRS-232C RS-232CRS-232CGP-IBGP-IB GP-IBGP-IB

1. Only DARC modulator2. Only RDS/RBDS modulator3. DARC & Stereo modulators4. RDS/RBDS & Stereo modulators5. Only Stereo modulator6. DARC & RDS

1. Only DARC modulator2. Only RDS/RBDS modulator

Example of Bit Error Rate measuring

RF RF RF RF

GP-IB/RS-232C/USB

DATA CLOCK

DATA CLOCK

PC PC

MSG−2175MSG−2174 MSG−2175 MSG−2174

GP-IB/RS-232C/USB

DUT DUT

AM/FM Signal Generator AM/FM Signal GeneratorMAS-8420 / MAS-8400 MAS-8420 / MAS-8400

Configuration example of FM Multiplex signal capture

Signal Generators Signal Generators

General General

Features

Features