msl2pm astm level 2
TRANSCRIPT
MSL2PMASTM LEVEL 2PROCEDURE MASK
UV STERILAZATION
* Made in Ontario* ASTM F2100-19 Compliant* Health Canada Approved* ISO 13485 Compliant Facility* UV Sterilized
1-888-240-1110
FEATURES
INOVATIVE SOURCING
MediGuard Systems of Canada 53 Churchill Dr. Suite 4Barrie, OntarioL4N-8Z5
12000695 CANADA INC. o/a Mediguard Systems of Canada
COMPLIANT PERFORMANCE *Bacterial Filtration Efficiency >99%*Differential Pressure <4.0 mm H2O/CM2Sub-Micron PFE @ 0.1 micron >98%*Synthetic Blood Penetration Resistance 120 mm/Hg*Flame Spread CLASS 1
(ASTM 2100-19)
The Mediguard Systems “Innovative Sourcing” policy allows us to provide fully compliant PPE products utilizing a combination of 50% domestically and 50% Internationally sourced raw materials in order to provide our customers with cost effective solutions to critical PPE while continuing to support Canadian raw material suppliers, and mitigating supply chain interruptions.
Every single surgical mask manufactured at our Barrie Ontario production facility undergoes a through UV light sterilization process in order to provide the highest quality surgical masks, above industry standards.
MADE IN ONTARIO FOR PROFESSIONALS
Mediguard Systems ASTM Level 2 procedure masks are 100% Canadian made in our ISO-8 Clean Room facility located in Barrie Ontariofor Ontario’s Health Care Professionals. Constructed with 25gsm three beam spunbond polypropylene, A Meltblown Polypropylene core with a BFE & PFE above 98%, 3mm Nylon ear loops (also available in spandex), and a 3 mm Aluminum single core nose bridge.