mt01_assembly_01
DESCRIPTION
Broken lines of assembly because coloring becomes more difficult *Take care when using sharp or pointed objects or when may be differences in dimensions, depending on the once parts are assembled. *Occasionally, white spots will be apparent on folds It is recommended that this be done after each stage *Follow the working method and markings carefully. tool to make a light crease along the dotted or solid line. This will make the folds straight. Avoid making under the paper you want to cut. 2TRANSCRIPT
Please glue them by aligning the red and red/blue and blueparts if they are marked on the paper.
2
Note
Basic working method and markingsTo begin
How to assemble
Tools and materials needed
Items of Caution
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen
- pin set - glue - hand towel ( for cleaning your fingers) -
dictionary or other heavy book ( to press the papers flat).
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the
type of printer used.
*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.
One - point Advice
*Before beginning assembly, test adhesive amounts
on extra paper.
*Cut carefully with cutting blade, Exacto-knife or
scissors.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more difficult
once parts are assembled.
*As an adhesive, white wood glue is recommended.
Avoid over application as this may cause the paper to
wrinkle.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
Cut along these lines.Dotted line
Fold along these lines. The printed surface should beon the inside of the folded shape.
Broken lines
Fold along these lines. The printed surface should beon the outside of the folded shape.
Solid lines
Do not fold or cut the partsmarked .
Red dots are the referencepositions for gluing surfaces.
Cut out parts marked with anasterisk(*).
Reference photo
3
Indication of Working Methods
First, assemble each component by following the workingmethod and markings. Then, refer to the illustration andphotos below to glue the parts together.
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Fold or Curve Glue
Engine 1Sheet A, 16 parts in total
Engine 2Sheet A, 6 parts in total
Reference photo
1 Assembling the Engine
A-A-91(92)91(92)
A-A-89(90)89(90)
A-A-75(76)75(76)
A-A-83(82)83(82)
A-A-79(80)79(80)
A-A-81(84)81(84)
A-A-77(78)77(78)
A-A-73(74)73(74)
A-A-71(72)71(72)
A-A-87(88)87(88)
A-A-85(86)85(86)
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side.
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side.
4
Indication of Working Methods
First, assemble each component by following the workingmethod and markings. Then, refer to the illustration andphotos below to glue the parts together.
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Fold or Curve Glue
Engine 3Sheet A, 84 parts in total
1 Assembling the Engine
Reference photo
A-A-103(104)103(104)
A-A-99(100)99(100)
A-A-93(94)93(94)
A-A-105(106)105(106)
A-A-59(60)59(60)
A-A-67(68)67(68)
A-A-15(16)15(16)
A-A-13(14)13(14)
A-A-11(12)11(12)
A-A-9(10)9(10)
A-A-31(32)31(32)
A-A-63(64)63(64)
A-A-55(56)55(56)
A-A-47(48)47(48)
A-A-39(40)39(40)
A-A-51(52)51(52)
A-A-43(44)43(44)A-A-35(36)35(36)
A-A-37(38)37(38)
A-A-45(46)45(46)
A-A-53(54)53(54)
A-A-61(62)61(62)A-A-69(70)69(70)
A-A-101(102)101(102)
A-A-27(28)27(28)
A-A-25(26)25(26)
A-A-23(24)23(24)
A-A-21(22)21(22)
A-A-19(20)19(20)
A-A-17(18)17(18)
A-A-41(42)41(42)
A-A-65(66)65(66)
A-A-57(58)57(58)A-A-49(50)49(50)
A-A-33(34)33(34)
A-A-29(30)29(30)
A-A-95(96)95(96)
A-A-97(98)97(98)
A-A-7(8)7(8)
A-A-5(6)5(6)
A-A-3(4)3(4)
A-A-1(2)1(2)
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side.
5
Indication of Working Methods
First, assemble each component by following the workingmethod and markings. Then, refer to the illustration andphotos below to glue the parts together.
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Fold or Curve Glue
Engine 4Sheet A, 7 parts in total
1 Assembling the Engine
Reference photo
Reference photo
Reference photo
Engine 5Sheet A, 3 parts in total
IntakeSheet A, 7 parts in total
A-A-119119
A-A-121121
A-A-123123
A-A-125125
A-A-110110
A-A-109109
A-A-108108
A-A-111111
A-A-117117A-A-116116
A-A-112112
A-A-114114
A-A-115115
A-A-120120
A-A-122122
A-A-124124
A-A-113113
12
3
1 3Glue in order from to on the graphic.
* At this point, do not glue A-120 and 119 on A-125.
6
Indication of Working Methods
First, assemble each component by following the workingmethod and markings. Then, refer to the illustration andphotos below to glue the parts together.
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Fold or Curve Glue
1 Assembling the Engine
Engine 6Sheet A, 5 parts in total
Engine 7Sheet A, 4 parts in total
Engine 8Sheet A, 2 parts in total
Reference photo
Reference photo
Reference photo
A-A-147147
A-A-146146
A-A-143143
A-A-142142
A-A-140140
A-A-129129
A-A-128128
A-A-130130A-A-132132
A-A-131131
A-A-141141
1
2
1Glue in order from to on the graphic.2
7
Reference photo
Indication of Working Methods
First, assemble each component by following the workingmethod and markings. Then, refer to the illustration andphotos below to glue the parts together.
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Fold or Curve Glue
EngineSheet A, 147 parts in total
1 Assembling the Engine
A-A-118118A-A-107107
A-A-133133
A-A-134134A-A-135135
A-A-136136
A-A-139139
A-A-145145
A-A-127127A-A-126126
A-A-138138
A-A-1441441
34
5
6
7
8
910
11
12
13
14
15
16
1718
19
19
20 20
A-A-137137
2
Connect each of the previously assembled parts in order from - according to the diagram.1 20
Engine1
Engine2
Engine3
Engine4
Engine5
Engine6
Engine7
Engine8
[ The right side of engine ]
[ [ The rThe right side of engine ]ight side of engine ][ The right side of engine ]
8
Indication of Working Methods
First, assemble each component by following the workingmethod and markings. Then, refer to the illustration andphotos below to glue the parts together.
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Fold or Curve Glue
Side Covers 1Sheet B, 1 parts in total
Side Covers 2Sheet B, 6 parts in total
Side Covers 3Sheet B, 2 parts in total
2 Assembling the Side Covers
Reference photo
Reference photo
Reference photo
B-B-9
B-B-2
B-B-3
B-B-4
B-B-5
B-B-7 B-B-6
B-B-1
B-B-8
9
Indication of Working Methods
First, assemble each component by following the workingmethod and markings. Then, refer to the illustration andphotos below to glue the parts together.
Fold each relevant part according to the assembly symbols.Please use the dots on each component as reference when gluing surfaces.
Fold or Curve Glue
Side Covers 4Sheet B, 9 parts in total
2 Assembling the Side Covers
Side Covers 5Sheet B, 2 parts in total
B-B-1414
B-B-1515
B-B-1616
B-B-2020
B-B-1717 B-B-1818 B-B-1919
B-B-1313
B-B-1212
B-B-1111
B-B-1010
Reference photo
Reference photo