mud cat™ 225d dredge - mud cat dredges · slurry pump hydraulic driven ... mud cat invented the...
TRANSCRIPT
Mud Cat™ 225D DredgeGENERAL
Length (O.A.): 34 ft-5 in (10.5 m)
Width (O.A.): 8 ft-5 in (2.6 m)
Height (O.A.): 9 ft-4 in (2.8 m)
Weight: 22,500 lbs. (10,205 kg)
Draft: 27 in (0.7 m)
Fuel Capacity: 180 gallons (681 liters)
FLOATATION
Pontoons: Two 30 in W x 37 in D x 30 ft (0.8 m x 0.9 m x 9.1 m) 10 gauge (3.4 mm) steel with internal bulkheads and
stiffeners; formed for rigidity. Polyurethane foam filled.
CUTTER ASSEMBLY - MODEL 815 OPTION
Shroud: Hydraulically adjustable Mud Shield
Drive System: Single low-speed, high-torque motor/gearbox
Auger Diameter: 13.6 in (346 mm) without cutter knives
17.6 in (447 mm) with cutter knives
Auger Pitch: 11 in (279 mm)
Auger Flighting: 3/8 in (9.5 mm)
Speed: Variable to 100 RPM
Cutter Knives: Detachable heat-treated blades
Auger Torque: 16,500 in-lbs. (46 kg-m)
CUTTER ASSEMBLY - MODEL 727 OPTION
Shroud: Semi-open anti turbidity shroud with forward / backward angle adjustment
Drive System: Two (2) low-speed, high-torque motors
Auger Diameter: 10 in (254 mm) without cutter knives
15-1/4 in (387 mm) with cutter knives
Auger Pitch: 9 in (228 mm)
Auger Flighting: 3/8 in (9.5 mm)
Speed: Variable to 70 RPM
Cutter Knives: Detachable heat-treated blades
Auger Torque: 6,000 in-lbs. (670 N-m)
WORKING CAPACITY
Cut: 8 ft-6 in (2.6 m) wide
Operating Depth: 15 ft (4.6 m) maximum
ENGINE
John Deere Diesel 225 HP (167.7 kW) at 2400 RPM with drop pan under engine skid
FUEL USAGE
10.7 gallons (40.5 liters) per hour at full HP rating
SLURRY PUMP
Hydraulic driven submersible slurry pump with high chrome 600 Brinell volute and impeller. (Other material options available.)
Centrifugal Vortex Impeller: Max solids diameter 6 in (152 mm)
Impeller Diameter: 18 in (457 mm)
Suction Diameter: 6 in (152 mm)
Discharge Diameter: 6 in (152 mm)
Nominal Pump Performance: 2000 GPM (453 m3/hr) against 120 ft (36.6 m) head
Up to 124 yds3/hr (95 m3/hr) of production at 30% solids content
Results may vary.
PROPULSION
Triple sheave hydraulic-driven winch 12 in (304 mm)
Traverse Speed: 0 - 60 FPM (18.3 m/min) maximum forward & reverse
Average Cutting Speed: 8 - 12 FPM (2.4 - 3.7 m/min)
Wire Rope Diameter: 3/8 in (9.5 mm)
HYDRAULIC SYSTEM
Dual pumps
Reservoir: 60 gallons (178 liters) at full mark
Circuit One: Slurry pump drive - hydrostatic transmission
Circuit Two: Auger, Traverse, Mud Shield, and Ladder
Pressure Compensating Load Sense Pump
Proportional Valve System
CONTROL SYSTEM
On-Board Operator
• Engine - Start / Stop / Speed
• Slurry Pump - On / Speed
• Auger - Forward / Off / Reverse
• Travel - Forward / Off / Reverse / Speed
• Hoist - Up / Off / Down
ELECTRICAL SYSTEM
Voltage: 12VDC
Alternator Output: 65 Ampere
Batteries: (2) 12VDC, 205 Ampere Hour, Parallel Wired
Circuits: 2 wire system, full ground
NOTE: Specifications subject to change without notice.
Mud Cat™ 225D Dredge
A Mud Cat 225D cleans out a mine tailings pond in the US.
OPTIONAL EQUIPMENT:Rotating cutterhead for handling sloped wallsFlow meterDensity meterLiner protection wheelsBroadcaster Discharge Attachment for spray dredgingGPS System (w/sub-meter accuracy)Slurry thickness tattle tailStainless steel components and / or hullPipe, hose, floatsSpotlightClosed loop video monitor for dischargeRemote control option for hazardous environmentsPartial and full automation packages
Easy to use switch controls for all dredge functions.
HYDRAULIC SYSTEM• Closed-circuit hydrostatic
transmission system• Electronically controlled
proportional valves with adjustable flow sections
• Off-the-shelf, top of the line hydraulic components
• Biodegradable oil available
ENGINE• 225 HP Turbo-charged
after cooled John Deere diesel engine
• Full enclosed power unit for weather protection
OPERATOR’S STATION• Easy to use basic dredge controls• A/C and heating systems• Analog gauges• Ergonomic air-ride chair
TRAVERSE DRIVE PROPULSION• Hydraulically driven treble
sheave winch • Electronic speed control • Up to 60 ft. per minute travel• Forward and reverse
CUTTERHEAD (815 MODEL OPTION)• Hydraulically adjustable
mud shield• Hi-torque motor for
heavier materials
CUTTERHEAD (727 MODEL OPTION)• Hydraulically adjustable
forward / backward angle control
• High shroud design for maximum solids intake
LADDER• Downforce hydraulic
ram cylinders for superior excavation power
• Replaceable discharge pipe independent from ladder structure
HULL• 10 gauge steel construction
with internal bulkheads and stiffeners
• Compartmentalized design• Polyurethane foam filled
SLURRY PUMP• Ladder-mounted
submersible hydraulic driven pump
• High chrome construction for abrasive slurries
• 6 in. spherical solids passage
DISCHARGE• 8 in. discharge
with flange connection
FEATURES BENEFITS
Two Cutterhead Options 727 Model for bio-solids materials & 815 Model for heavier, harder to cut materials
Adjustable Cutterhead Allows operator to adjust the cutterhead for optimal performance
Down Force Ladder Cylinder Allows operator to keep positive down-force into material so cutter will not walk on top of it
Electrical Over Hydraulic Allows operator easy control of all dredge functions and simplifies hydraulic
Two Pump Hydraulic System Reduced maintenance and higher efficiency
Traverse Cable Drive System Allows for high torque pulling into materials; cable system can be removed without detaching from anchors
Ladder Pump Ladder mounted pump for higher solids pumping than hull mounted pumps
Pump Defender (patent pending)
Optional patent pending Pump Defender allows for cleaning of the pump inlet after every revolution of the cutterhead to greatly reduce down time in debris rich environments.
Made by Mud Cat Mud Cat invented the auger dredge and continually leads the industry for innovation and quality. Mud Cat dredges are built from the highest quality parts and therefore last longer than the competition.
Ph: 913-642-5100 or 866-467-4010 (USA Only) Fax: 913-642-5119
E-mail: [email protected]
1750 Madison Avenue New Richmond, Wisconsin U.S.A. 54017
Website: www.mudcatdredge.comMud Cat, A Division of