MUD MIXING & STORAGE TANKSRENTAL / SALES

Modular Mud Storage & Mixing Tank 500 BBLS

T +603 7722 4113 F +603 7722 4115 E enquiries@petrozchem.com W www.petrozchem.com

40’ ISO Shipping Dimension

Modular Mud Storage & Mixing Tank 500 BBLS

AgreementsCertificates & Standards

Salient Features:

Dimension

Tank Capacity Length Width Height Max Gross wtTare WeightMax Pay Load

: 500 Barrels: 12,192 mm: 2,438 mm: 2,895 mm: 160 Tons: 14 Tons: 174 Tons

Rentals for both short-term and long-term periods. Daily, monthly and annual rentals with flexible rental terms.Fast mobilization and demobilization services. Services to our clients’ facilities located across Southeast Asia region.

Our rental programs offer includes :

MUD MIXING & STORAGE TANKSRENTAL / SALES

T +603 7722 4113 F +603 7722 4115 E enquiries@petrozchem.com W www.petrozchem.com

Mud Type : WBM, SBMMotor Power : 2.2 kwSpeed : 60 rpmImpellor Dia : 610 mmShaft Dia : 57 mmMotor Mounting : Horizontal / Vertical

Petrozchem Mud Tanks are available for storage and mixing of oil and water based drilling mud, it comes with epoxy linings and handrail. Each Tank is provided with 8” suction line and 6” filling line. Each Tank is provided with isola-tion valves for provision against leaks and contaminations. Corner Fittings are Standard Casted Container Corner Fittings for sea / land transportation.

Brine Density 2.2 SGSuction Manifold Line8” SCH 40 API Pipe with FlangesFilling Line6” SCH 40 API PipeVent 4” SCH 40 Gooseneck typeValves Butterfly Valves ASTM A126

Mud Type : WBM, SBMLength : 254 mmDischarge dia : 88.9 mmInlet Dia : 47.6 mmInlet Jet Dia : 12.7 mmSpiral Jetting Nozzles

Agitators Mud Guns

1173

1083

784

2260**

FRONT VIEWSCALE 1:60

2438

12192

13659TYP)

725(TYP) 666 (TYP)

3390

2260**

19.20°

DR

PLAN

CH

DETAIL CHSCALE 1 : 75

2

3

4

1 5

7

DETAIL DRSCALE 1 : 30

AGITATOR MOUNTING PLATE (2X)REFER TO DWG NO : S27329089-10-01

ALL DRILLED HOLE FOR AGITATOR MOUNTING TO BE MEASURED AT SITE BY FABRICATOR.

2895

11989**

EA

EB

ECSIDE VIEW

10mmOFFSET FROM OUTER SURFACETYPICAL ALL FLANGES

397

DETAIL EASCALE 1 : 15

3

275

DETAIL EBSCALE 1 : 15

2

5

5typ

20

527

DETAIL ECSCALE 1 : 15

4

40FT MUD CONTAINER

GENERAL ASSEMBLY

094.01-DWG-101 094.01 1 OF 1 0

1:100 (UNO)AC/UR/SC

mm

10.0 TONNES EGL

A3

GENERAL NOTES:

1. ALL DIMENSION ARE IN MILLIMETERS UNLESS NOTED OTEHRWISE.

(**) CORNER CASTING SLOT DIMENSION.

DO NOT SCALE, ASK IF IN DOUBT.

2. ALL MATERIAL TO BE MILD STEEL A36, UNLESS NOTED OTHERWISE.

3. ALL WELDING TO BE FULL PENETRATION WELD, UNLESS NOTED OTHERWISE, SATISFYING ABS APPROVED WELDING PROCEDURE, SUBMITTED BY FABRICATOR TO MASCON PRIOR TO START OF FABRICATION.

ALL STIFFENERS ANGLE BAR AND T-BEAM WELDING TO BE FILLET WITH LEG LENGTH 5mm, UNLESS NOTED OTHERWISE.

PREPARTION EDGES FOR WELDING AS PER STANDARD UNLESS NOTED OTHERWISE.

4. MPI INSPECTION: ALL WELDS TO HAVE 100% MPI PER AWS D1.1. VISUAL INSPECTION:ALL WELDS TO HAVE 100% VISUAL INSPECTION PER AWS D1.1.

ACCEPTANCE CRITERIA: UT INSPECTION, MPI INSPECTION & VISUAL INSPECTION TO BE ACCORDANCE WITH ADS D1.1.

5. ALL FLANGES SPECIFICATION TO BE ASME B16.5 CLASS 150.

ALL PIPE TO BE SCH. 40, ASTM 106 GR. B, UNLESS NOTED OTHERWISE.

BOLTS AND NUT SPECS SIZE, LENGTH AND QUANTITY AS PER FLANGES REQUIREMENTS, MATERIAL TO BE EN8.8 OR EQUIVALENT, ZYLAN COATING, PROVIDED BY FABRICATOR.

6. PAINTING AND SURFACE PREPARATION:

SAND BLASTING - PRIOR TO PAINTING THE ITEMS SHALL BE SAND BLASTED TO GRADE SA 21/2 AS DEFINED IN THE SWEDISH CODE OF PRACTICE SIS 055900/1967.

STANDARD MINIMUM MAXIMUM SA 21/2 40MICROMETERS 100 MICROMETERS

(WATER BASE MUD & STEEL BRINE TANKS ONLY) COATS - INTERNAL LINING PRIMER - CEILCOTE 380 PRIMER ( 2-5 MILS ) WET INTERMEDIATE - 2 COATS CEILCOTE 242HT (APPLY 20-32MILS WFT)

COATS - PAINT FOR TANK EXTERIOR PRIMER -INTERZINC 52 @ 2-3 MILS (50-75 MICRONS) DFT INTERMEDIAT - INERGARD 475HS MIO @ 5-7 MILS (125-150 MICRONS) DFT FINISH - INTERTHANE 990 @ 2-3 MILS (50-75 MICRONS) DFT

7. TESTING:

THE SHELL AND ANCILLARY COMPONENTS OF TANK CONTAINERS MUST BE INSPECTED AND TESTED AT FIVE-YEAR INTERVALS WITH AN INTERMEDIATE 2.5 YEAR INSPECTION.

THE 2.5-YEAR TEST INCLUDES AN INTERNAL INSPECTION OF THE TANK CONTAINER VESSEL, AN EXTERNAL INSPECTION OF THE ISO FRAME, A LEAKAGE TEST OF THE SHELL AND ALL SERVICE EQUIPMENT INCLUDING ALL VALVES AND FITTINGS.

THE 5-YEAR TEST INCLUDES A HYDROSTATIC PRESSURE TEST, AN INTERNAL AND EXTERNAL VISUAL INSPECTION, A LEAKAGE TEST AND A TEST OF THE SATISFACTORY OPERATION OF ALL SERVICE EQUIPMENT INCLUDING ALL VALVES AND FITTINGS.

8. LIFTING PADEYES 4X = WLL 8.5 TONNES EACH, TO SUIT CROSBY SHACKLE WLL=8.5TONNES, G-2130CT, STOCK NO. 1260586 OR EQUIVALENT. (PROVIDED BY FABRICATOR)

ITEM NO. DESCRIPTION QTY. Material Weight (grams) REMARKS

1 CONTAINER FRAME WITH LADDER & PANEL'S ASSEMBLY 1 see part list 9216556.40

2 4" WELD NECK FLANGE, ASME B16.5 CLASS 150 with PIPE FITTING 4 - 9562.68 SEE SEPARATE DWG FOR PIPE FITTING DETAIL

3 6" WELD NECK FLANGE, ASME B16.5 CLASS 150 with PIPE FITTING 4 18640.25 SEE SEPARATE DWG FOR PIPE FITTING DETAIL

4 8" WELD NECK FLANGE, ASME B16.5 CLASS 150 with PIPE FITTING 2 - 41740.68 SEE SEPARATE DWG FOR PIPE FITTING DETAIL

5 BAIER FLUSH HATCH 2 Cast Aluminum Steel (Galvanized) - MODEL NO: BFHSQ24X24A/S

7 2" PIPE TREADED (VENTILATION PIPE) 2 ASTM A36 Steel 1450.67

REVISIONSZONE REV. DESCRIPTION DATE APPROVED

A ISSUED FOR FABRICATION 30-JAN-15

PROJECT:

TITLE:

ENGINEER: SCALE:TOTAL WEIGHT: DRAWN:

UNIT:

ALL INFORMATION AND DATA ON THIS DRAWING ARE THE PROPERTY OF PETROZCHEM IT IS NOT TO BE COPIED, DISCLOSED, DUPLICATED NOR SHOWN TO A THIRD PARTY WITHOUT PRIOR CONSENT

SHT SIZE:REV.SHT NO:DWG NO: PROJ NO:

PETROZCHEM OILFIELD SERVICES SDN BHD

87654321

F

E

D

C

B

A

F

E

D

C

B

87654321

A