muhammad imran malik · dr. muhammad imran malik permanent postal address : near janaza-gah. ward #...
TRANSCRIPT
Dr. MUHAMMAD IMRAN MALIK
Permanent Postal Address : Near Janaza-gah.
Ward # 2 Muftian, Dina,
Distt. Jhelum, Pakistan
Present Postal Address : Lab # 316, H.E.J. Research Institute of Chemistry,
International Center for Chemical and Biological
Sciences (ICCBS), University of Karachi, Karachi
75270, Pakistan
Phone Nrs. : +92-21-111-222-292 Ext. 139; +92-332-5691061;
+92-21-99261735; +92-544-634449
Fax Nr. : +92-21-34819018-9
E-mail : [email protected]; [email protected]
Google Scholar : http://scholar.google.com.pk/citations?user=h3P0NRQAAAAJ&hl=en
PERSONAL INFORMATION
Father’s Name : Muhammad Usman Akhtar
Date of Birth : 25-04-1976
Domicile : Jhelum (Punjab)
N.I.C. Nr. : 37301-5035077-5
Marital Status : Married
Religion : Islam
Blood Group : B +ive
Hobbies & Extra
Curricular Activities : Travelling & Photography
Coin Collecting
Playing & Watching Cricket
CONTACT INFORMATION
2
PROFESSIONAL JOB AND RESEARCH EXPERIENCE
Position : Assistant Professor
Institute : H.E.J. Research Institute of Chemistry,
International Center for Chemical and Biological Sciences
(ICCBS)
University : University of Karachi
Duration : 16-01-2012 TO Date
Area of Research : Analytical Polymer Science
POST-DOCTORAL RESEARCH EXPERIENCE
A)
Research Topic : “Comprehensive Polymer Characterization”
Research advisor : Prof. Dr. Taihyun Chang
Division of Advanced Materials Science and Department
of Chemistry, Pohang University of Science and
technology (POSTECH), Pohang, Korea
Duration : 01-01-2015 to 31-12- 2015
---------------------------------------------------------------------------------------------------------------------
B)
Research Topic : “Multidimensional Characterization of block copolymers”
Research advisor : Prof. Dr. Harald Pasch
SASOL Chair of Analytical Polymer Science,
Department of Chemistry and Polymer Science,
University of Stellenbosch, South Africa
Duration : 01-01-2010 to 31-12- 2011
3
ACADEMIC QUALIFICATIONS
Ph. D.
Subject: Polymer Chemistry Session: 2005-2009
Thesis title: “Microwave-assisted synthesis and characterization
of polyoxyalkylene block copolymers”
Web-Link: http://unipub.uni-graz.at/obvugrhs/content/titleinfo/207423
Academic Supervisor: Prof. Dr. Bernd Trathnigg
Advisors : Prof. Dr. Christian Oliver Kappe (MW-assisted Synthesis)
Prof. Dr. Otto Glatter (Physical Characterization)
Prof. Dr. Robert Saf (Spectroscopy)
University : Karl-Franzens-Universitäte Graz , Austria
P.G.D.
Subject: Chemical Technology Session: 2000-2001
University: University of the Punjab, Lahore, Pakistan
M. Sc.
Subject: Chemistry Session: 1997-1999
University: University of the Punjab, Lahore, Pakistan
B. Sc.
Subjects: Botany, Zoology and Chemistry. Session: 1994-1996
University: University of the Punjab, Lahore, Pakistan
F. Sc.
Subjects: Premedical Session: 1992-1994
Board: Board of Intermediate and secondary education, Rawalpindi, Pakistan
S.S.C.
Subjects: Science Session: 1990-1991
Board: Board of Intermediate and secondary education, Rawalpindi, Pakistan
4
PRE-DOCTORAL PROFESSIONAL JOB EXPERIENCE
1) Sandal Dyestuff Industries Pvt. Ltd. 01-11-04 to 30-10-05
Position held: Consultant
2) Albaqi Chemicals 01-01-03 to 30-10-04
Position held: Technical Manager
3) Polyco. Intl. Pvt. Ltd. 01-06-02 to 31-10-02
Position held: Technical Research Officer
4) MB Dyes, Chemical & Silk Ind. Pvt. Ltd. 01-03-00 to 31-05-02
Position held: Research Chemist
DISTINCTIONS
a) Cumulative Impact Factor (CIF) is more than 250, exceeding 625 citations, h-index
of 16, and i10 index of 21
b) At position number ‘27’ in the List of “Research Productivity Awardees 2017-
Chemistry”, released by Pakistan Council of Science and Technology
c) At position number ‘36’ in the List of “Research Productivity Awardees 2015”, released
by Pakistan Council of Science and Technology
d) Received certificate of appreciation from Chemical Society of Pakistan for
publishing “Highest Impact Factor Scientific Article-Chemistry” from Pakistan in
year 2016
e) At position ‘61’ in the directory of “Productive Scientists of Pakistan” in category
“Chemistry”, by Pakistan Council of Science and Technology
f) Associate Editor-in-Chief of “Journal of Analytical, Bioanalytical and Separation
Techniques”
g) Ambassador of Asian Council of Science Editors (ACSE)
h) "Nishan-e-Zafar" from University of Karachi for Meritorious Services for Education
and Research at University of Karachi
i) Selected to represent Pakistan in TWAS Young Scientists Meeting 2014
j) Have been awarded Claude Leon Foundation postdoctoral fellowship for postdoctoral
research in South Africa
5
h ) Featured in HEC monthly “NEWS AND VIEWS" (December 2007) under heading
“HEC scholar honoured in Austria”
i) First publication is selected as a cover page of well renowned journal of polymer science
“Macromolecular Chemistry and Physics” (Vol.208, Issue 23, 2007)
j) Got HEC overseas scholarship for Ph.D. in selected fields in 2005
RESEARCH INTERESTS
a) HPLC of polymers
b) Novel multidimensional techniques for polymer characterization
c) Multidimensional liquid chromatography
d) Coupling of liquid chromatography and spectroscopy (FTIR, MS, NMR)
e) Microwave-assisted polymerizations
f) Synthesis of different architectures of polymers
g) Development of structure-property correlations
h) Drug delivery
i) Polymer stabilized metallic nanoparticles and their applications
j) Chemo-sensors
k) Molecularly imprinted polymers and their applications
l) Stimuli-responsive polymers
m) Organic solar cell
RESEARCH PROJECTS
4- Title: “Optimization of Donor and Acceptors Materials for Fabrication of Efficient
Organic Solar Cell”
Funding Agency: Pakistan Science Foundation under Pak-Sri Lanka Joint Projects (PSF-
NSF/Eng/S-HEJ - 03)
Duration: 24 Months
Award Amount: Rs. 2.1 million (Total amount for both sides is 40,000 US dollars)
Status: Running
6
3- Title: “Novel epoxy-terminated macro-monomers and their polymerizations for synthesis
of different amphiphilic architectures”
Funding Agency: Higher Education Commission
Project Code: NRPU-5735
Project Duration: 36 months
Award Amount: Rs 5.67 million
Status: Running
2- Title: “Synthesis, meticulous molecular characterization and self-assembly behavior of
Biodegradable Linear and Star-shaped Block Copolymers”
Funding Agency: Higher Education Commission
Project Code: NRPU-5754
Project Duration: 24 months
Award Amount: Rs 2.88 million
Status: Running
1- Title: “Development of facile methods for separation and characterization of polymer
blends and block copolymers of polymethyl methacrylate and polyvinyl pyridine”
Funding agency: Higher Education Commission
Project duration: 9 months
Award Amount: Rs 0.5 million
Status: Completed
Thesis Supervised / Co-Supervised
11. Sidra Safdar Durrani, M. Phil. 2019, “Ring opening polymerization of cyclic carbonates and
comparison of thermal properties of synthesized polymers” as Supervisor
10. Tehseen Ahmed, M. Phil. 2019, “One-step synthesis of block copolymers by simultaneous
ring-opening and atom transfer radical polymerization techniques using a dual functional initiator”
as Supervisor
7
9. Muhammad Saad Hussain, M. Phil. 2019, “Determination of Heavy Metal Ions by Modified
Chitosan” as Supervisor
8. Rubina Abdul-Karim, Ph.D. 2018, “Synthesis & Characterization of Biodegradable
Amphiphilic Block Copolymers Containing Polycarbonates” as Supervisor
7. Sana Rahim, Ph.D. 2018, “Synthesis and Characterization of Homo and Amphiphilic
Block Copolymers of Poly(2-vinylpyridine) Stabilized Metallic Nanoparticles” as Supervisor
6. Faheem Kareem, M. Phil. 2018, “Block copolymer based micelles for enhanced
bioavailability of low bioavailable drugs” as Co-Supervisor
5- Tahreem Saba, M. Phil. 2018, “Functionalized magnetic iron nanoparticles for the removal
of selected pollutants from aqueous system” as Co-Supervisor
4- Muhammad Khurram Tuffail, M. Phil. 2017, “Synthesis and meticulous molecular
characterization of amphiphilic block copolymer constituting poly(ethylene oxide) and
poly(methyl methacrylate)” as Supervisor
3- Adnan Murad Bhayo, M. Phil. 2017, “Synthesis and characterization of arms star-shaped
amphiphilic block copolymers consisting of poly(ethylene oxide) and poly(ε caprolactone)” as
Supervisor
2- Muhammad Azhar, M. Phil. 2017, “Efficient p-doped donor regioregular poly(3-
hexylthiophene); synthesis and characterization in context of Organic Solar Cell” as Co-
Supervisor
1- Javeria Khatoon, M.Sc. 2016, “Synthesis and Characterization of functionalized magnetic
nanoparticles for environmental applications” as Co-supervisor
8
SCIENTIFIC CONFERENCES AND MEETINGS
29- 14th International Symposium on Natural Product Chemistry (ISNPC-14), 4-6 November
2018, Karachi, Pakistan
28- 2nd International Symposium on Natural Products for the Future (ISNPF-2), 6-8 November
2018, Karachi, Pakistan.
27- Pittsburg Conference on Analytical Chemistry & Applied Spectroscopy (Pittcon-2018),
February 26-March 1, 2018, Orlando, Florida, USA
26- 2nd International Conference on Advanced Materials and Process Engineering, 12-13
December, 2017, Karachi, Pakistan
25- 26th National & 16th International Conference “Global Challenges and Chemistry”, 20-22
November, 2017, Karachi Pakistan
24- 6th International Symposium-cum-Training course on Molecular Medicine and Drug
Research (MMDR6), November 6-9, 2017, Karachi, Pakistan
23- “14th EURASIA Conference on Chemical Sciences (EuAsC2S-14)”,
December 15-18, 2016, Karachi, Pakistan
22- “11th International Symposium on Analytical and Environmental Chemistry (ISAEC-2016)”,
March 7-8, 2016, Jamshoro, Sindh, Pakistan
21- “PACIFICHEM 2015, The international chemical congress of PACIFIC BASIN Societies”,
December 15-20, 2015, Honolulu, Hawaii, USA
20- “45th IUPAC World Chemistry Congress”, August 9-14, 2015, BEXCO, Busan, Korea
19- “National Workshop on Chemical and Biological Laboratory Safety”, September 23-24,
2014 , Karachi, Pakistan
9
18- “National Science Conference”, May 01-02, 2014, Karachi, Pakistan
17- “One Day International Seminar “Science & Environment”, April 1, 2014, MUST, Mirpur,
Azad Kashmir
16- “TWAS Regional Conference of Young Scientists on the topic Recent Trends in Physical
& Biological Sciences", March 7-8, 2014, Bangalore, India
15- “Symposium on Modern Trends in Organic Synthesis”, February 26, 2014, FUUAST,
Karachi, Pakistan
14- “14th Asian Symposium on Medicinal Plants, Spices and Other Natural Products (ASOMPS-
XIV)”, December 9-12, 2013, Karachi, Pakistan
13- “12th International & 24th National Chemistry Conference”, October 28-30, 2013, Multan,
Pakistan
12- “13th International Symposium on Natural Product Chemistry”, September 22-25, 2012,
Karachi, Pakistan
11- “PAK-US workshop on applications of Nanotechnology (WANT-2012)”, May 29-30, 2012,
International Center for Chemical and Biological Sciences (ICCBS), Karachi, Pakistan
10- “European polymer congress”, 26 June-01 July, 2011, Granada, Spain
9- “11th UNESCO/IUPAC Conference Workshop and Conference on Functional Polymeric
Materials & Composites”, April 26-29, 2011, Stellenbosch, South Africa
8- “ Analitika 2010, International conference on analytical sciences”,
December 5-9, 2010, Stellenbosch, South Africa
7- “Postdoctoral research day of University of Stellenbosch”,
October 28, 2010, STIAS, Stellenbosch, South Africa
10
6- “16th International Symposium on Separation Science”, September 6-10, 2010, Rome, Italy
5- “European Polymer Congress”, July 12-17, 2009, Graz, Austria
4- “NAWI-Graz Workshop”, June 26, 2009, Graz, Austria
3- “Ist Doc-Days of Universities of Graz”, June 24-25, 2009, Graz, Austria
2- “1st Joint Austrian & Slovenian Polymer Meeting ASPM2008 and
9th Austrian Polymer Meeting”, March 26–28, 2008, Graz, Austria
1- “9th Symposium on instrumental analysis”, June 29- July 02, 2008, Pécs, Hungary
3- “Publishing your Research”
Muhammad Imran Malik
A week-long series of ACS Workshops “Global chemists’ code of ethics (GCCE)” in
Khyber Pakhtunkhwa, March 12 to 16, 2018
A- Abbottabad University of Science and Technology. Abbottabad
B- The University of Haripur, Haripur
C- Khyber Medical University, Peshawar
D- Kohat University of Science and Technology, Kohat
E- University of Science and Technology, Bannu
2- “Scientific Writing”
Muhammad Imran Malik
ACS Workshop “Global chemists’ code of ethics (GCCE)” as a part of “26th National
& 16th International Conference “Global Challenges and Chemistry”
November 22, 2017, Karachi, Pakistan
WORKSHOPS CONDUCTED
11
1- “General and Chemical Laboratory Safety”
Muhammad Imran Malik
National Workshop on Chemical and Biological Laboratory Safety, September 23-24,
2014, Karachi, Pakistan
1- “Advanced Separation Techniques for Polyolefins”
Harald Pasch, Muhammad Imran Malik
ISSN: 0945-6074 ISSN: 2196-1174 (electronic)
ISBN: 978-3-319-08631-6 ISBN: 978-3-319-08632-3 (eBook)
DOI: 10.1007/978-3-319-08632-3
Web-link : https://www.springer.com/gp/book/9783319086316
Publisher: Springer, Cham Heidelberg New York Dordrecht London
2- “pH-Sensitive Drug Delivery Systems” Abdul Ghaffar, Basit Yameen, Muhammad Latif,
Muhammad Imran Malik in “Metal Nanoparticles for Drug Delivery and Diagnostic
Applications” Muhammad Raza Shah, Muhammad Imran, Shafi Ullah (Eds.), Elsevier
1- “Biomedical Applications of Magnetic Nanoparticles” Sana Rahim, Faiza Jan Iftikhar,
Muhammad Imran Malik In “Metal Nanoparticles for Drug Delivery and Diagnostic
Applications” Muhammad Raza Shah, Muhammad Imran, Shafi Ullah (Eds.), Elsevier
SCIENTIFIC PUBLICATIONS
A) BOOKS
B) CHAPTERS IN BOOKS
12
1. “Nanosensor for the determination of Insecticide”
Muhammad Imran Malik, Muhammad Raza Shah, Sana Rahim, Sadia Khalid,
Muhammad Iqbal Bhanger, Muhammad Ismail Vohra
US Patent Filed on 29th May, 2018, Application Serial Number: 15991800
D) SCIENTIFIC JOURNAL PUBLICATIONS
56- “Characterization of Polystyrene-block-Poly(2-vinyl pyridine) Copolymers and Blends
of their Homopolymers by Liquid Chromatography at Critical Conditions”
Rabia Khatoon, Sana Rahim, Rubina Abdul-Karim, Syed Ghulam Musharraf,
Muhammad Imran Malik
Macromolecules, 2019, 50 (20), 7688-7695. (I.F. = 5.997)
DOI: http://dx.doi.org/10.1021/acs.macromol.9b01779
Web-link: https://pubs.acs.org/doi/10.1021/acs.macromol.9b01779
55- “Salicylaldehyde Derivative of Nano-Chitosan as an Efficient Adsorbent for Lead(II),
Copper(II), and Cadmium(II) ions”
Muhammad Saad Hussain, Syed Ghulam Musharraf, Muhammad Iqbal Bhanger,
Muhammad Imran Malik
International Journal of Biological Macromolecules, 2019, In Revision (I.F. = 4.784)
54- “Critical Parameters of Liquid Chromatography at Critical Conditions of Polymers:
Pore Diameter, Mobile Phase Composition, Temperature and Gradients”
Muhammad Imran Malik
Journal of Chromatography A, 2019, In Press (I.F. = 3.858)
DOI: https://doi.org/10.1016/j.chroma.2019.460440
53- “A Novel and Efficient Colorimetric Assay for Quantitative Determination of
Amlodipine in Environmental, Biological and Pharmaceutical samples”
Sana Yaqoob, Sana Rahim, Adnan Murad Bhayo, Muhammad Raza Shah,
C) PATENTS
13
Abdul Hameed, Muhammad Imran Malik
ChemistrySelect, 2019, 4 (34), 10046-10053 (I.F. = 1.716)
DOI: https://doi.org/10.1002/slct.201902334
Web-link: https://onlinelibrary.wiley.com/doi/abs/10.1002/slct.201902334
52- “Acridine-Thiosemicarbazones Stabilized Silver Nanoparticles as Selective Sensor
for Cu+2 ion detection in Tap water”
Imdad Ali, Ibanga Okon Isaac, Farid Ahmed, Fariha Aslam, Shujaat Ali, Muhammad
Imran, Rima D. Alharthy, Muhammad Raza Shah, Muhammad Imran Malik, Abdul
Hameed
ChemistrySelect, 2019, 4 (30), 8757-8763 (I.F. = 1.716)
DOI: 10.1002/slct.201901381
Web-link: https://onlinelibrary.wiley.com/doi/abs/10.1002/slct.201901381
51- “Star-shaped Poly(ethylene oxide)-block-poly(caprolactone) Conjugated Silver
Nanoparticles: A Colorimetric Probe for Cephalexin in Environmental, Biological and
Pharmaceutical Samples”
Sana Rahim, Adnan Murad Bhayo, Muhammad Raza Shah, Muhammad Imran
Malik
Microchemical Journal, 2019, 149, 104048 (I.F. = 3.206)
DOI: https://doi.org/10.1016/j.microc.2019.104048
Web-link:https://www.sciencedirect.com/science/article/pii/S0026265X19307350?dgcid=author
50- “Detection of lard contamination in vegetable oils by FT-IR spectroscopy and
chemometrics”
Fazeelah Munir, Syed Ghulam Musharraf, Syed Tufail Hussain Sherazi, Muhammad
Imran Malik and Muhammad Iqbal Bhanger
Turkish Journal of Chemistry, 2019, 43, 1089-1108 (I.F. = 1.377)
DOI: 10.3906/kim-1902-17
Web-link: http://journals.tubitak.gov.tr/chem/issues/kim-19-43-4/kim-43-4-10-1902-17.pdf
49- “The Selectivity of Poly(2-vinylpyridine-block-methyl methacrylate) Copolymer Films:
An AFM study”
14
Sana Rahim, Ghayas Uddin Siddiqui, Aneela Maalik, Najma Memon, Muhammad
Raza Shah, Muhammad Imran Malik
RSC Advances, 2019, 9 (29), 16455-16466 (I.F. = 3.257)
DOI: 10.1039/C9RA00831D
Web-link: https://pubs.rsc.org/en/content/articlelanding/2019/ra/c9ra00831d#!divAbstract
48- “Calixarene Coated Gold Nanoparticles as a Novel Therapeutic Agent”
Sadia Khalid, Samina Parveen, Sana Rahim, Muhammad Raza Shah, Shakil Ahmed,
Muhammad Imran Malik
Arabian Journal of Chemistry, 2019, In Press (I.F. = 4.039)
47- “Synthesis, antimicrobial, antioxidant, cytotoxic, antiurease and molecular docking
studies of N-(3-trifluoromethyl)benzoyl-N’-aryl thiourea derivatives”
Aneela Maalik, Ayaz Ahmed, Lubna Rasheed, Hina Rahim, Muhammad Saleem,
Nighat Fatima, Abdur Rauf, Abdul Wadood, Muhammad Riaz, Muhammad Imran
Malik, Hummera Rafique, Muhammad Naveed Zafar, Amara Mumtaz
Bioorganic Chemistry, 2019, 88, 102946, (I.F. = 3.929)
DOI: https://doi.org/10.1016/j.bioorg.2019.102946
Web-link: https://www.sciencedirect.com/science/article/pii/S0045206819301129
46- “Enhanced Therapeutic Efficacy of Clotrimazole by Delivery Through Poly(ethylene
oxide)-block-poly(ε-caprolactone) Copolymer-based Micelles”
Faheem Kareem, Adnan Murad Bhayo, Muhammad Imran, Muhammad Raza Shah,
Khalid Mohammed Khan, Muhammad Imran Malik
Journal of Applied Polymer Science, 2019, 136(28), 47769 (I.F. = 2.188)
DOI: 10.1080/03639045.2018.1550091
Web-link: https://onlinelibrary.wiley.com/doi/full/10.1002/app.47769
45- “Poly(propylene ether carbonate)-Based Di- and Tri-Block Copolymers: Synthesis
and Chromatographic Characterization”
Rubina Abdul-Karim, Syed Ghulam Musharraf, Muhammad Imran Malik
Macromolecular Research, 2019, 27 (9), 911-918 (I.F. = 1.767)
DOI: 10.1007/s13233-019-7128-y
15
Web-link:https://link.springer.com/article/10.1007/s13233-019-7128-y?wt_mc=alerts.TOCjournals&utm_source=toc&utm_medium=email&utm_campaign=toc_13233_27_9
44- “Design and synthesis of polymer based micellar system for enhanced anticancer
efficacy of Paclitaxel in breast cancer through its co-delivery with Naringin”
Tooba Jabri, Muhammad Imran, Aisha Aziz, Komal Rao, Muhammad irfan, Muhammad
Imran Malik, Shabana Usman Simjee, Muhammad Arfan, Muhammad Raza Shah
Drug Development and Industrial Pharmacy, 2019, 45 (5), 703-414 (I.F. = 2.367)
DOI: 10.1080/03639045.2018.1550091
Web-link:
https://www.tandfonline.com/doi/abs/10.1080/03639045.2018.1550091?journalCode=iddi20
43- “Recent Applications of Molecularly Imprinted Polymers in Analytical Chemistry”
Muhammad Imran Malik, Huma Ishaque Shaikh , Ghulam Mustafa, Muhammad.Iqbal
Bhanger
Separation and Purification Reviews, 2019; 48(3), 179-219 (I.F. = 6.059)
DOI: https://doi.org/10.1080/15422119.2018.1457541
Web-link: https://www.tandfonline.com/doi/full/10.1080/15422119.2018.1457541
42- “Convenient pH-Responsive Removal of Acid Black 1 by Green L-Histidine/Iron Oxide
Magnetic Nanoadsorbent from Water: Performance and Mechanistic Studies”
Qurrat-ul-Ain, Jaweria Khatoon, Muhammad Raza Shah, Muhammad Imran Malik,
Iffat Abdul Tawab Khan, Sumaira Khurshid, Raheela Naz
RSC Advances, 2019, 9 (6), 2978-2996 (I.F. = 3.257)
DOI: 10.1039/C8RA09279F
Web-link:
https://pubs.rsc.org/en/content/articlelanding/2019/ra/c8ra09279f#!divAbstract
41- “Green synthesis of methyl gallate conjugated silver nanoparticles: a colorimetric
probe for gentamicin”
Noor ul Ain, Zara Aslam, Mohammad Yousuf, Itrat Anis, Farid Ahmed, Muhammad
Imran Malik, Shaheen Faizi, Muhammad Raza Shah
New Journal of Chemistry, 2019, 43(4), 1972-1979 (I.F. = 3.201)
DOI: 10.1039/C8NJ04565H
16
Web-link:
https://pubs.rsc.org/en/content/articlelanding/2019/nj/c8nj04565h/unauth#!divAbstract
40- “Recent Trends in Fast Liquid Chromatography for Pharmaceutical Analysis”
Najma Memon, Tahira Qureshi, Muhammad Iqbal Bhanger and Muhammad Imran
Malik
Current Analytical Chemistry, 2019, 15 (4), 349-372 (I.F. = 1.306)
DOI: 10.2174/1573411014666180912125155
Web-link: http://www.eurekaselect.com/165361/article?trendmd-shared=3
39- “Synthesis and Characterization of 4-Arms Star-Shaped Amphiphilic Block
Copolymers Consisting of Poly(ethylene oxide) and Poly(ε-caprolactone)”
Adnan Murad Bhayo, Rubina Abdul-Karim, Syed Ghulam Musharraf, Muhammad
Imran Malik
RSC Advances, 2018, 8 (50), 28569-28580 (I.F. = 3.257)
DOI: 10.1039/C8RA05000G
Web-link:
http://pubs.rsc.org/en/Content/ArticleLanding/2018/RA/C8RA05000G#!divAbstract
38- “Chromatographic Characterization of Amphiphilic Di- and Tri- block Copolymers of
Poly(ethylene oxide) and Poly(ε-caprolactone)”
Muhammad Irfan, Adnan Murad Bhayo, Syed Ghulam Musharraf, Muhammad Imran
Malik
Journal of Separation Science, 2018, 41(17), 3352-3359. (I.F. = 2.516)
DOI:10.1002/jssc.201800465
Web-link: https://onlinelibrary.wiley.com/doi/abs/10.1002/jssc.201800465
37- “Enhanced Electrochemical Response of Modified Glassy Carbon Electrode by
Poly(2-vinlypyridine-b-methyl methacrylate) Conjugated Gold Nanoparticles for
Detection of Nicotine”
Sana Rahim, Asma Rauf, Saba Rauf, Muhammad Raza Shah, Muhammad Imran
Malik
RSC Advances, 2018, 8(62), 35776-35786. (I.F. = 3.257)
17
DOI: 10.1039/C8RA06857G
Web-link: https://pubs.rsc.org/en/content/articlehtml/2018/ra/c8ra06857g
36- “Ring-Opening Polymerization of Propylene Carbonate: Microstructural Analysis of
the Polymer and Selectivity of Polymerization by 2D-NMR Techniques”
Rubina Abdul-Karim, Abdul Hameed, Muhammad Imran Malik
European Polymer Journal, 2018, 105, 95-106 (I.F. = 3.899)
DOI: https://doi.org/10.1016/j.eurpolymj.2018.05.028
Web-link: https://www.sciencedirect.com/science/article/pii/S0014305718304580
35- “Polystyrene-block-poly(2-vinylpyridine)-conjugated silver nanoparticles as
colorimetric sensor for quantitative determination of Cartap in aqueous media and
blood plasma”
Sana Rahim, Sadia Khalid, Muhammad Iqbal Bhanger, Muhammad Raza Shah,
Muhammad Imran Malik
Sensors and Actuators, B: Chemical, 2018, 259, 878-887 (I.F. = 6.393)
DOI: https://doi.org/10.1016/j.snb.2017.12.138
Web-link: https://www.sciencedirect.com/science/article/pii/S0925400517324711
34- “Synthesis and characterization of poly(3-hexylthiophene): improvement of
regioregularity and energy band gap”
Muhammad Azhar Ansari, Shaikh Mohiuddin, Fatma Kandemirli, Muhammad Imran
Malik
RSC Advances, 2018, 8 (15), 8319-8328 (I.F. = 3.257)
DOI: 10.1039/C8RA00555A
Web-link: http://pubs.rsc.org/en/content/articlehtml/2018/RA/C8RA00555A
33- “Efficient Removal of Reactive Orange 107 Dye from Aqueous Media by Shrimp
Shell Derived Chitosan Functionalized Magnetic Nanoparticles”
Tehreem Saba, Fozia Minhas, Muhammad Imran Malik, Abdul Jabbar, Farah Naz Talpur,
Muhammad Iqbal Bhanger
American Journal of Analytical Chemistry, 2018, 9 (12), 633-653 (I.F. = 1.57)
DOI: 10.4236/ajac.2018.912046
18
Web-link: https://www.scirp.org/Journal/PaperInformation.aspx?PaperID=89566
32- “Analysis of individual block length of amphiphilic di- & tri-block copolymers
containing poly(ethylene oxide) and poly(methyl methacrylate)”
Muhammad Khurram Tufail, Rubina Abdul-Karim, Sana Rahim, Syed Ghulam Musharraf,
Muhammad Imran Malik
RSC Advances, 2017, 7 (66), 41693-41704. (I.F. = 3.257)
DOI: 10.1039/C7RA08804C
Web-link: http://pubs.rsc.org/en/content/articlehtml/2017/RA/C7RA08804C
31- “Evaluation of morphology, aggregation pattern and size dependent drug loading
efficiency of gold nanoparticles stabilized with poly (2-vinyl pyridine)”
Sana Rahim, Syed Abid Ali, Farid Ahmed, Muhammad Imran, Muhammad Raza Shah,
Muhammad Imran Malik
Journal of Nanoparticle Research, 2017, 19 (7), 259 (I.F. = 2.333)
DOI: 10.1007/s11051-017-3933-4
Web-link: https://link.springer.com/article/10.1007/s11051-017-3933-4
30- “N-Alkylated 1,4-diazabicyclo[2.2.2]octane (DABCO)‒‒Polyethylene glycol (PEG)
Melt as Deep Eutectic Solvent for Synthesis of Fisher Indoles and 1H-Tetrazoles”
Sarfaraz Ali, Rima D. Alharthy, Mariya al-Rashida, Shakil Ahmed, Muhammad Imran
Malik, and Abdul Hameed
ACS Omega, 2017, 2 (6): 2891-2900 (I.F. = 2.584)
DOI: 10.1021/acsomega.7b00618
Web-link: http://pubs.acs.org/doi/abs/10.1021/acsomega.7b00618
29- “Synthesis and characterization of novel biodegradable di- & tri-block
copolymers based on ethylene carbonate polymer as hydrophobic segment”
Rubina Abdul-Karim, Syed Ghulam Musharraf, Muhammad Imran Malik
Journal of Polymer Science, Part A: Polymer Chemistry, 2017, 55 (11):1887-1893
DOI: 10.1002/pola.28559 (I.F. = 3.114)
Web-link: http://onlinelibrary.wiley.com/doi/10.1002/pola.28559/abstract?campaign=woletoc
19
28- “Ring-opening polymerization of ethylene carbonate: comprehensive structural
elucidation by advanced 1D & 2D-NMR techniques, and selectivity analysis”
Rubina Abdul-Karim, Abdul Hameed, Muhammad Imran Malik
RSC Advances, 2017, 7, 19 : 11786-11795 (I.F. = 3.257)
DOI: 10.1039/c7ra01113j
Web-link: http://pubs.rsc.org/en/Content/ArticleLanding/2017/RA/C7RA01113J#!divAbstract
27- “Synthesis and meticulous molecular, morphological and thermal characterization of
linear and star-shaped polycaprolactones”
Muhammad Irfan , Joongsuk Oh , Syed Ghulam Musharraf, Muhammad Raza Shah,
Shakil Ahmed, Muhammad Imran Malik
RSC Advances, 2016, 6, 100: 98117-98127 (I.F. = 3.257)
DOI: 10.1039/C6RA23890D
Web-link: http://pubs.rsc.org/en/content/articlelanding/2016/ra/c6ra23890d#!divAbstract
26- “Analytical Polymer Science”
Muhammad Imran Malik
Journal of Analytical, Bioanalytical and Separation Techniques, 2016, 1(1), 1-4
Web-link : http://www.ommegaonline.org/article-details/Analytical-Polymer- Science/1005
25- “Alkylene Oxide Poylmerizations: Identification of Side Reactions and By-products”
Muhammad Imran Malik, Muhammad Irfan, Akbar Khan, Sana Rahim, Rubina Abdul-
karim, Jamshed Hashim
Journal of Polymer Research, 2016, 23 (12), 258 (I.F. = 1.956)
DOI: 10.1007/s10965-016-1141-z.
Web-link: http://link.springer.com/article/10.1007/s10965-016-1141-z
24- “Field Flow Fractionation: New and Exciting Perspectives in Polymer Analysis”
Muhammad Imran Malik, Harald Pasch
Progress in Polymer Science, 2016 ; 63, 42-85 (I.F. = 34.000)
DOI: http://dx.doi.org/doi:10.1016/j.progpolymsci.2016.03.004
Web-link: http://www.sciencedirect.com/science/article/pii/S007967001630003X
20
23- “Comprehensive two-dimensional liquid chromatographic analysis of poloxamers”
Muhammad Imran Malik, Sanghoon Lee , Taihyun Chang
Journal of Chromatography A, 2016, 1442:33-41. (I.F. = 4.612)
DOI: 10.1016/j.chroma.2016.03.008
Web-link: http://www.sciencedirect.com/science/article/pii/S0021967316302588
22- “Solvent-Free Chemistry for Tetrazole synthesis from 1,8-diazabicyclo[5.4.0]
undec-7-ene (DBU)-based Fluorinated Ionic Liquids, their Micellization,
and Density Functional Theory Studies”
Abdul Hameed, Syed Abid Ali, Ali Anus Khan , Syed Tarique Moin , Khalid Mohammed
Khan , Jamshed Hashim , Fatima Zahra Basha , Muhammad Imran Malik
RSC Advances, 2014, 4 (109), 64128-64137 (I.F. = 3.907)
DOI: 10.1039/C4RA13393E
Web-link:http://pubs.rsc.org/en/Content/ArticleLanding/2014/RA/c4ra13393e#!divAbstract
21- “Characterization of Poly(2-vinylpyridine)-block-poly(methyl methacrylate)
Copolymers and Blends of Their Homopolymers by Liquid Chromatography at
Critical Conditions”
Muhammad Imran Malik, Tooba Mahboob, Shakil Ahmed
Analytical and Bioanalytical Chemistry; 2014, 406 (25):6311-6317 (I.F. = 3.841)
DOI: 10.1007/s00216-014-8075-2
Web-link: http://link.springer.com/article/10.1007%2Fs00216-014-8075-2
20- “Novel Developments in the Multidimensional Characterization of Segmented
Copolymers”
Muhammad Imran Malik, Harald Pasch
Progress in Polymer Science, 2014, 39, 87-123 (I.F. = 34.000)
DOI: 10.1016/j.progpolymsci.2013.10.005
Web-link: http://www.sciencedirect.com/science/article/pii/S0079670013001263
19- “A Rapid and Efficient CsF Catalyzed tandem Knoevenagel-Michael reaction”
Khalid Mohammed Khan, Imran Khan, Shahnaz Perveen, Muhammad Imran Malik
Journal of Fluorine Chemistry, 2014, 158, 1-5 (I.F. = 2.284)
21
DOI: 10.1016/j.jfluchem.2013.11.010
Web-link: http://www.sciencedirect.com/science/article/pii/S0022113913003643
18- "Separation of telechelic oligomers according to architecture by liquid
chromatography"
Muhammad Imran Malik, Hasnat Ahmed, Bernd Trathnigg
Journal of Chromatography A, 2013, 1314, 180-187 (I.F. = 4.612)
DOI: 10.1016/j.chroma.2013.09.023
Web-link: http://www.sciencedirect.com/science/article/pii/S0021967313014337
17- “Recent Advances in High-Temperature Fractionation of Polyolefins”
Harald Pasch, Muhammad Imran Malik, Tibor Macko
Advances in Polymer Science; 2013, 251, 77-140 (I.F. = 4.925)
DOI: 10.1007/12_2012_167
Web-link: http://link.springer.com/chapter/10.1007%2F12_2012_167
16- “Two-dimensional liquid chromatography of Polystyrene-Polyethylene oxide
block copolymers”
Muhammad Imran Malik, Gareth W. Harding, Monika Elvira Grabowsky, Harald Pasch
Journal of Chromatography A, 2012, 1244, 77-87 (I.F. = 4.612)
DOI: 10.1016/j.chroma.2012.04.045
Web-link: http://www.sciencedirect.com/science/article/pii/S002196731200622X
15- “Characterization of Polystyrene-block-Polyethylene Oxide Diblock Copolymers
and Blends of Homopolymers by Liquid Chromatography at Critical Conditions”
Pritish Sinha, Monika Grabowsky, Muhammad Imran Malik, Gareth William Harding,
Harald Pasch
Macromolecular Symposia; 2012, 313-314, 1, 162-169 (I.F. = 0.913)
DOI: 10.1002/masy.201250318
Web-link: http://onlinelibrary.wiley.com/doi/10.1002/masy.201250318/abstract
14- “Two-dimensional liquid chromatography of PDMS-PS block Copolymers”
Muhammad Imran Malik, Gareth W. Harding, Harald Pasch
22
Analytical and Bioanalytical Chemistry; 2012, 403, 2, 601-611 (I.F. = 3.841)
DOI: 10.1007/s00216-012-5838-5
Web-link: http://link.springer.com/article/10.1007%2Fs00216-012-5838-5
13- “Characterization of polydimethylsiloxane-block-polystyrene (PDMS-b-PS)
copolymers by liquid chromatography at critical conditions”
Muhammad Imran Malik, Pritish Sinha, Gareth M. Bayley, Peter E. Mallon, Harald Pasch
Macromolecular Chemistry and Physics; 2011, 212, 12, 1221–1228 (I.F. = 2.622)
DOI: 10.1002/macp.201000711
Web-link:
http://onlinelibrary.wiley.com/doi/10.1002/macp.201000711/abstract;jsessionid=3C605468
95A8D0E88F639D7788602D7E.f01t02
12- “Liquid chromatography at critical conditions in ternary mobile phases: Gradient
elution along the critical line”
Bernd Trathnigg, Muhammad Imran Malik, Nicole Pircher, Stephan Hayden
Journal of Separation Science; 2010, 33, 14, 2052–2059 (I.F. = 2.741)
DOI: 10.1002/jssc.201000181
Web-link: http://onlinelibrary.wiley.com/doi/10.1002/jssc.201000181/full
11- “Self-assembly and structural analysis of multiblock polyoxyalkylene
copolymers”
Martin Dulle, Muhammad Imran Malik, Bernd Trathnigg and Otto Glatter
Macromolecules, 2010, 43, 18, 7868–7871 (I.F. = 5.997)
DOI: 10.1021/ma101384r
Web-link: http://pubs.acs.org/doi/abs/10.1021/ma101384r
10- “Characterization of polyoxyalkylene block copolymers by combination of
different chromatographic techniques and MALDI-TOF-MS”
Muhammad Imran Malik, Bernd Trathnigg and Robert Saf
Analytica Chimca ACTA. 2010, 658, 2, 217-224 (I.F. = 5.256)
DOI: 10.1016/j.aca.2009.11.017
Web-link: http://www.sciencedirect.com/science/article/pii/S0003267009015025
23
9- “Characterization of ethylene oxide – propylene oxide block copolymers by
combination of different chromatographic techniques and matrix-assisted laser
desorption ionization time-of-flight mass spectroscopy”
Muhammad Imran Malik, Bernd Trathnigg and Robert Saf
Journal of Chromatography A; 2009, 1216, 38, 6627-6635 (I.F. = 4.612)
DOI: 10.1016/j.chroma.2009.07.067
Web-link: http://www.sciencedirect.com/science/article/pii/S0021967309011534
8- “Full separation of oligomers in block copolymers of ethylene oxide and propylene
oxide”
Muhammad Imran Malik, Bernd Trathnigg
Journal of Separation Science; 2009, 32, 11, 1771-1781 (I.F. = 2.741)
DOI: 10.1002/jssc.200900043
Web-link: http://onlinelibrary.wiley.com/doi/10.1002/jssc.200900043/abstract
7- “Liquid chromatography under critical conditions (LCCC) : Practical applications in
the analysis of amphiphilic block copolymers”
Muhammad Imran Malik, Hasnat Ahmed and Bernd Trathnigg
Analytical and Bioanalytical Chemistry; 2009,393, 6-7, 1797-1804 (I.F. = 3.841)
DOI: 10.1007/s00216-008-2590-y
Web-link: http://link.springer.com/article/10.1007%2Fs00216-008-2590-y
6- “Amphiphilic polymers based on higher alkylene oxides: Synthesis and
characterization by different chromatographic techniques”
Muhammad Imran Malik, Bernd Trathnigg, and C. Oliver Kappe
Journal of Chromatography A; 2009, 1216, 7, 1167-1173 (I.F. = 4.612)
DOI: 10.1016/j.chroma.2008.12.067
Web-link: http://www.sciencedirect.com/science/article/pii/S0021967308022486
5- “Microwave-assisted polymerization of higher alkylene oxides”
Muhammad Imran Malik, Bernd Trathnigg, and C. Oliver Kappe
European Polymer Journal; 2009, 45, 3, 899-910 (I.F. = 3.899)
DOI: 10.1016/j.eurpolymj.2008.11.035
24
Web-link: http://www.sciencedirect.com/science/article/pii/S0014305708006617
4- “Monofunctional polymers in liquid adsorption chromatography:Determination of the
interaction parameter in the range of weak interaction”
Bernd Trathnigg, Muhammad Imran Malik, Nguyen Viet Cuong, Alexander M. Skvortsov
Journal of Chromatography A; 2008, 1207, 1-2, 122-129 (I.F. = 4.612)
DOI: 10.1016/j.chroma.2008.08.040
Web-link: http://www.sciencedirect.com/science/article/pii/S0021967308013976
3- “Microwave assisted Synthesis and characterization of end functionalized
poly(propylene oxides) as model compounds”
Muhammad Imran Malik, Bernd Trathnigg, C. Oliver Kappe
European Polymer Journal; 2008, 44, 1, 144-154 (I.F. = 3.899)
DOI: 10.1016/j.eurpolymj.2007.10.025
Web-link: http://www.sciencedirect.com/science/article/pii/S0014305707005721
2- “A database for polymer chromatography: dependence of interaction parameter on
mobile phase composition”
Bernd Trathnigg, Muhammad Imran Malik, Otto Jamelnik, Nguyen Viet Cuong
Analytica Chimca ACTA; 2007, 604, 1, 39-44 (I.F. = 5.256)
DOI: 10.1016/j.aca.2007.06.043
Web-link: http://www.sciencedirect.com/science/article/pii/S0003267007010859
1- “Selectivity of PEO-block-PPO diblock copolymers in the microwave-accelerated
anionic ring-opening polymerization of propylene oxide with PEG as initiator”
Muhammad Imran Malik, Bernd Trathnigg, C. Oliver Kappe
Macromolecular Chemistry and Physics; 2007, 208 , 23, 2569-2577 (I.F.= 2.622)
*Selected as cover Page of the Issue
DOI: 10.1002/macp.200700320
Web-link: http://onlinelibrary.wiley.com/doi/10.1002/macp.200700320/abstract
25
E) SCIENTIFIC CONFERENCE CONTRIBUTIONS (ORAL)
22- “Novel Sensors based on Metallic Nanoparticles Stabilized by Poly(2-vinyl pyridine)(P2VP)
containing Block Copolymers”
Muhammad Imran Malik, Sana Rahim, Asma Rauf, Muhammad Iqbal Bhanger, Muhammad
Raza Shah; Pittsburg Conference on Analytical Chemistry & Applied Spectroscopy (Pittcon-
2018), February 26-March 1, 2018, Orlando, Florida, USA
21- “Synthesis and meticulous molecular characterization of amphiphilic block copolymer
constituting polyethylene oxide and poly(methyl methacrylate)”
Muhammad Imran Malik *, Muhammad Khurram Tufail, Sana Rahim, Rubina Abdul Karim,
Syed Ghulam Musharraf; 2nd International Conference on Advanced Materials and Process
Engineering, 12-13 December, 2017, Karachi, Pakistan
20- “Regioselective synthesis under external electric field and electrochemical band
broadening of Poly(3-hexylthiophene”
Muhammad Azhar Ansari, Shaikh Mohiuddin, FatmaKandemirli, Muhammad Imran Malik
2nd International Conference on Advanced Materials and Process Engineering, 12-13
December, 2017, Karachi, Pakistan
19- “Ethylene carbonate: polymerization, and meticulous characterization by advanced
multi-dimensional NMR and chromatographic techniques”
Muhammad Imran Malik, Rubina Abdul Karim, Abdul Hameed, Syed Ghulam Musharraf;
26th National & 16th International Conference “Global Challenges and Chemistry”, 20-22
November, 2017, Karachi Pakistan
18- “Star-shaped Polycaprolactones: Synthesis and Meticulous Molecular,
Morphological and Thermal Characterization”
Muhammad Imran Malik, Muhammad Irfan, Joongsuk Oh, Muhammad Raza Shah, Shakil
Ahmed, and Taihyun Chang; “14th EURASIA Conference on Chemical Sciences
(EuAsC2S-14)”, December 15-18, 2016, Karachi, Pakistan
26
17- “Comprehensive two-dimensional liquid chromatographic analysis of poloxamers”
Muhammad Imran Malik, Sanghoon Lee, Taihyun Chang
“11th International Symposium on Analytical and Environmental Chemistry (ISAEC-2016),
March 7-8, 2016, Jamshoro, Sindh, Pakistan
16- “Comprehensive 2D analysis of poloxames”
Muhammad Imran Malik, Sanghoon Lee, Taihyun Chang
“PACIFICHEM 2015, The international chemical congress of PACIFIC BASIN Societies”,
December 15-20, 2015, Honolulu, Hawaii, USA
15- “General and Chemical Laboratory Safety”
Muhammad Imran Malik
National Workshop on Chemical and Biological Laboratory Safety, September 23-24,
2014, Karachi, Pakistan
14- “Analytical Polymer Science-State of Art & Future Perspectives”
Muhammad Imran Malik
One Day International Seminar “Science & Environment”, April 1, 2014, MUST, Mirpur,
Azad Kashmir
13- “Hyphenated Techniques for Characterization of Complex Polymers”
Muhammad Imran Malik
Symposium on Modern Trends in Organic Synthesis, February 26, 2014, FUUAST,
Karachi, Pakistan
12- “Discrimination of block structure in liquid chromatography of polymers”
Muhammad Imran Malik
14th Asian Symposium on Medicinal Plants, Spices and Other Natural Products (ASOMPS-
XIV), December 9-12, 2013, Karachi, Pakistan
11- “Multidimensional characterization of complex polymers”
Muhammad Imran Malik
12th International & 24th National Chemistry Conference, October 28-30, 2013, Multan,
27
Pakistan
10- “Two-dimensional liquid chromatography of complex polymers:
PDMS-PS block copolymers”
Muhammad Imran Malik, Pritish Sinha, Gareth W. Harding, Harald Pasch
European polymer congress, 26 June- 01 July 2011, Granada, Spain
9- “Multi-dimensional liquid chromatography of complex polymers"
Muhammad Imran Malik, Pritish Sinha, Gareth. W. Harding, Harald Pasch
11th UNESCO/IUPAC Conference Workshop and Conference on Functional Polymeric
Materials & Composites, April 26-29, 2011, Stellenbosch, South Africa
8- “Novel multidimensional separation methods for complex block copolymers”
Harald Pasch, Muhammad Imran Malik, Pritish Sinha
Polychar 19, March 20 – 24, 2011, Kathmandu, Nepal
7- “Characterization of poly(dimethyl siloxane)-block-poly(styrene) copolymers by
liquid chromatography at critical conditions (LCCC)”
Pritish Sinha, Muhammad Imran Malik, Gareth Bayley, Peter Mallon, Harald Pasch
5 th International symposium on the separation and characterization of natural and
synthetic macromolecules (SCM-5) ; January 26-28, 2011, Amsterdam,
The Netherlands
6- “Two dimensional liquid chromatography of complex polymers:
PS-PDMS block copolymers”
Muhammad Imran Malik, Pritish Sinha, Gareth. W. Harding, Harald Pasch
Analitika 2010, International conference on analytical sciences,
December 5-9, 2010, Stellenbosch, South Africa
5- “HPLC Characterization of PDMS-b-PS Copolymers”
Muhammad Imran Malik, P. Sinha, Gareth M. Bayley, Peter E. Mallon, Harald Pasch
16th International Symposium on Separation Science, September 6-10, 2010, Rome, Italy
28
4- “Characterization of EO-PO block copolymers by combination of different
chromatographic techniques and MALDI-TOF-MS” (OC6-13)
Muhammad Imran Malik, Bernd Trathnigg, Robert Saf
European polymer congress (EPF-09), July 12-17, 2009, Graz, Austria
3- “Semi-preparative 2-dimensional liquid chromatography (2D-LC) in combination
with MALDI-TOF-MS for analysis of EO-PO block copolymers”
Muhammad Imran Malik, Bernd Trathnigg, Robert Saf
Ist Doc-Day of Universities of Graz 2009; June 24-25, 2009, Graz, Austria
2- “Prediction of retention in liquid chromatography of polymers with isocratic and
gradient elution”
Bernd Trathnigg, Muhammad Imran Malik, Otto Jamelnik, Nguyen Viet Cuong
European polymer congress 2007; July 01 – 06, 2007, Protoroz, Slovenia
1- “A database for polymer chromatography”
Bernd Trathnigg, Muhammad Imran Malik, Otto Jamelnik, Nguyen Viet Cuong
3rd International symposium on the separation and characterization of natural and
synthetic macromolecules (SCM-3) ; January 31st - February 2nd, 2007, Amsterdam,
The Netherlands
F) SCIENTIFIC POSTERS
29- “Ring Opening Polymerization of Cyclic Carbonates and comparison of Thermal
Properties of Synthesized Polymers”
Sidra Safdar Durrani*, Rubina Abdul-Karim, Rafiq Ahmed , Shakil Ahmed, and
Muhammad Imran Malik
14th International Symposium on Natural Product Chemistry (ISNPC-14), 4-6 November
2018, Karachi, Pakistan.
28- “Star-shaped poly(ethylene oxide)-block-poly(ε-caprolactone)-conjugated silver
nanoparticles as colorimetric sensor for quantitative determination of cephalexin in
aqueous media and pharmaceutical tablets”
29
Adnan Murad Bhayo, Sana Rahim, Muhammad Raza Shah, Muhammad Imran Malik
14th International Symposium on Natural Product Chemistry (ISNPC-14), 4-6 November
20185, Karachi, Pakistan.
27- “Enhanced Electrochemical Response of Modified Glassy Carbon Electrode by
Poly(2-vinlypyridine-b-methyl methacrylate) Conjugated Gold Nanoparticles for
Detection of Nicotine”
Sana Rahim*, Asma Rauf, Saba Rauf, Muhammad Raza Shah, Muhammad Imran Malik
14th International Symposium on Natural Product Chemistry (ISNPC-14), 4-6 November
20185, Karachi, Pakistan.
26- “Determination of Heavy Metal Ions by Modified Chitosan”
Muhammad Saad Hussain*, Muhammad Iqbal Bhanger, Syed Ghulam Musharraf,
Muhammad Imran Malik
2nd International Symposium on Natural Products for the Future (ISNPF-2), 6-8 November
2018, Karachi, Pakistan.
25- “Micellization of Poly (ethylene oxide)-block-poly(ε-caprolactone) Copolymers:
Encapsulation and Release of Candesartan and Clotrimazole”
Faheem Kareem, Adnan Murad Bhayo, Khalid Muhammad Khan, Muhammad Raza Shah,
Muhammad Imran Malik
2nd International Symposium on Natural Products for the Future (ISNPF-2), 6-8 November
2018, Karachi, Pakistan.
24– “Engineering of Poly (3-hexylthiophene ) in Context of Organic Solar Cell”
Muhammad Azhar Ansari, Muhammad Imran Malik, Shaikh Mohiuddin; “14th
EURASIA Conference on Chemical Sciences (EuAsC2S-14)”, December 15-18, 2016,
Karachi, Pakistan
23- “Ethylene Carbonate: Polymerization and Meticulous Characterization by Multi
dimensional NMR and Chromatographic Techniques”
Rubina Abdul Karim, Muhammad Irfan, Abdul Hameed, Syed Ghulam Musharraf and
Muhammad Imran Malik; 14th EURASIA Conference on Chemical Sciences
(EuAsC2S-14)”, December 15-18, 2016, Karachi, Pakistan
30
22- “Evaluation of Size, Morphology and Aggregation of Gold Nanoparticles Stabilized
with Poly (2-Vinyl Pyridine)”
Sana Rahim, Muhammad Raza Shah, Farid Ahmed and Muhammad Imran Malik;
14thEURASIA Conference on Chemical Sciences (EuAsC2S-14)”, December 15-18,
2016, Karachi, Pakistan
21- “Synthesis and Meticulous Molecular Characterization of Amphiphilic Block
Copolymer Constituting Poly (ethylene oxide) and Poly(methyl methacrylate)”
Muhammad Khurram Tufail, Sana Rahim, Rubina Abdul Karim, Syed Ghulam Musharraf and
Muhammad Imran Malik; 14th EURASIA Conference on Chemical Sciences (EuAsC2S-
14)”, December 15-18, 2016, Karachi, Pakistan
20- “Fast Adsorption and Recovery of Toxic Organic Dyes from Aqueous Solution by
Magnetic Nanoparticles”
Jaweria Khatoon, Qurrat ul Ain, Muhammad Raza Shah and Muhammad Imran Malik;
14th EURASIA Conference on Chemical Sciences (EuAsC2S-14)”, December 15-18, 2016,
Karachi, Pakistan
19- “Synthesis and Characterization of Amphiphilic Star-shaped Block Copolymers of
Poly(ethylene oxide) and Poly(caprolactone)”
Adnan Murad Bhayo, Rubina Abdul Kareem, Muhammad Irfan, Syed Ghulam Musharraf
and Muhammad Imran Malik; 14th EURASIA Conference on Chemical Sciences
(EuAsC2S-14)”, December 15-18, 2016, Karachi, Pakistan
18- “Separation of star-shaped polymers with regard to number of arms”
Muhammad Imran Malik, Muhammad Irfan, Jinhwi Park, Taihyun Chang
“PACIFICHEM 2015, The international chemical congress of PACIFIC BASIN Societies”,
December 15-20, 2015, Honolulu, Hawaii, USA
17- "Oligomeric separation of Poloxamers"
Muhammad Imran Malik, Taihyun Chang
"45th IUPAC World Chemistry Congress", August 9-14, 2015, BEXCO, Busan, Korea
31
16- “Analysis of poly(2-vinyl pyridine)-b- poly(methyl methacrylate) copolymers by
interaction chromatography”
Muhammad Imran Malik, Tooba Mahboob, Shakil Ahmed
TWAS Regional Conference of Young Scientists on the topic “Recent Trends in Physical
& Biological Sciences", March 7-8, 2014, Bangalore, India
15- “Characterization of poly(2-vinyl pyridine)-b- poly(methyl methacryalte) copolymers
and blends of their homopolymers by liquid chromatography at critical conditions”
Tooba Mahboob, Hira Fatima Abbas, Shakil Ahmed, Muhammad Imran Malik
International Conference on Physical & Environmental Chemistry (ICPEC-2013),
September 9-11, 2013, Baragali, Pakistan
14- “Chromatographic characterization of PS-block-PEO”
Monika Grabowsky, Muhammad Imran Malik, Pritish Sinha, Harald Pasch
European polymer congress, 26 June-01 July 2011, Granada, Spain
13- “Nanoparticle Characterization by Field-Flow Fractionation”
Werner van Aswegen, Muhammad Imran Malik, Tino Otte, Harald Pasch
European polymer congress, 26 June-01 July 2011, Granada, Spain
12- “Two dimensional liquid chromatography of complex polymers:
PS-PDMS block copolymers”
Muhammad Imran Malik, Pritish Sinha, Gareth. W. Harding, Harald Pasch
11th UNESCO/IUPAC Conference Workshop and Conference on Functional Polymeric
Materials & Composites, April 26-29, 2011, Stellenbosch, South Africa
11- “Microstructural Separation and Analysis of Polyisoprene and Polyethylene Oxide
by Using Liquid Chromatography”
Pritish Sinha, Muhammad Imran Malik, Harald Pasch
11th UNESCO/IUPAC Conference Workshop and Conference on Functional Polymeric
Materials & Composites, April 26-29, 2011, Stellenbosch, South Africa
32
10- “Hyphenation of lccc with spectroscopy: PDMS-b-PS copolymers”
Muhammad Imran Malik, Pritish Sinha, Gareth. W. Harding, Harald Pasch
5 th International symposium on the separation and characterization of natural and
synthetic macromolecules (SCM-5) ; January 26 -28 , 2011, Amsterdam, The Netherlands
9- “Characterization of poly(styrene)-block-poly(ethylene oxide) copolymers by liquid
chromatography at critical conditions (LCCC)”
Pritish Sinha, Muhammad Imran Malik, Monika Grabowsky, Harald Pasch
Analitika 2010, International conference on analytical sciences, December 5-9, 2010,
Stellenbosch, South Africa
8- “Separation Of Block Copolymers Of Ethylene Oxide and Butene Oxide According
to Symmetry” (P-17)
Muhammad Imran Malik, Bernd Trathnigg and Robert Saf
5th conference by Nordic separation science society, August 26-29, 2009, Tallinn, Estonia
7- “Dependence of interaction parameters of higher epoxides on mobile phase
composition” (PC1-189)
Nguyen Viet Cuong , Muhammad Imran Malik, Bernd Trathnigg
European polymer congress (EPF-09), July 12-17, 2009, Graz, Austria
6- “Characterization of polyoxyalkylene block copolymers by combination of different
chromatographic techniques and MALDI-TOF-MS” (PC2-195)
Muhammad Imran Malik, Bernd Trathnigg and Robert Saf
European polymer congress (EPF-09), July 12-17, 2009, Graz, Austria
5 - “Synthesis of new polyoxyalkylene di- and multi-block copolymers and structural
analysis of their self-assembly” (PC3-88)
Muhammad Imran Malik, Martin Dulle, Bernd Trathnigg and Otto Glatter
European polymer congress (EPF-09), July 12-17, 2009, Graz, Austria
4 - “Microwave-assisted synthesis of different amphiphilic block copolymer
architectures” (PC1-26)
33
Muhammad Imran Malik, Hasnat Ahmed, Bernd Trathnigg, C. Oliver Kappe
European polymer congress (EPF-09), July 12-17, 2009, Graz, Austria
3- “Liquid chromatography under critical conditions (LCCC): Practical Applications”
Muhammad Imran Malik, Nguyen Viet Cuong, Bernd Trathnigg
9th Symposium on instrumental analysis; June 29- July 02, 2008, Pécs, Hungary
2- “Microwave-assisted synthesis and characterization of amphiphilic block
copolymer brushes and cones”
Muhammad Imran Malik, Bernd Trathnigg, Christian Oliver Kappe
1st Joint Austrian & Slovenian Polymer Meeting ASPM2008 and
9th Austrian Polymer Meeting; March 26–28, 2008, Graz, Austria
1- “Microwave-assisted synthesis and chracterization of amphiphilic block copolymers
based on different epoxides” (P1.4.62.)
Bernd Trathnigg, Christian Oliver Kappe, Muhammad Imran Malik, Hasnat Ahmed
European polymer congress 2007; July 01–06, 2007, Protoroz, Slovenia
REFRENCES
Will be furnished on demand