multi meters

NAME OF THE COMPANY

PRODUCT NAME

SPECIFICATION

RISHAB INSTRUMENTS

RISH Multi 11

Basic Accuracy 0.25 %

• Protective Rubber Holster for rough duty

• Analog scale (Bar Graph)

• Auto Ranging/Manual Mode

• DC Voltage measurement 30.00mV to 1000V

• AC Voltage measurement 3.000V to 1000V

• Resistance measurement 30.00W to 30.00MW

• Diode continuity

• Temperature measurement with Pt 100/Pt 1000

• Min/Max Value Storage

• Indication of Negative Values on Analog scale

• Overload warning

• Power Economizing circuit

RISH Multi 12S


• Automatic Blocking System (ABS)



• Auto Ranging/Manual Mode

• Optional: Computer connectivity with attachable interface adaptor using RISHCOM 100 software



• DC Current measurement 3.000 mA to 300.0mA

• AC current measurement 30.00 mA to 300.0mA

• Direct Display with clip on transformer 1000:1 (Range 30.00A to 300.0A)




RISH Multi 13S

• Basic Accuracy 0.25 %




• Auto Ranging/ Manual Mode

• Optional: Computer connectivity with attachable interface adapter using RISHCOM 100 software



• DC Current measurement 3.000 mA to 16A

• AC current measurement 30.00 mA to 10A




RISH Multi 14S









• DC Current measurement 300.0mA to 10A

• AC Current measurement 300.0mA to 10A




RISH Multi 15S









• DC Current measurement 300.0mA to 10A

• AC current measurement 300.0mA to 10A


• Diode continuity, % Duty Cycle

• Capacitance measurement 30.00nF to 30.00mF

• Frequency measurement 300.0Hz to 100.0kHz


RISH Multi 16S

Basic Accuracy 0.1% • Automatic Blocking System (ABS) • Protective Rubber Holster for rough duty • Analog scale (Bar Graph) • Auto Ranging/ Manual Mode • Optional: Computer connectivity with attachable interface adaptor using RISHCOM 100 software • DC Voltage measurement 30.00mV to 1000V • AC Voltage measurement 3.000V to 1000V TRMS measurement • DC Current measurement 300.0mA to 10A • AC current measurement 3.000mA to 10A • Resistance measurement 30.00W to 30.00MW • Diode continuity, % Duty Cycle • Capacitance measurement 30.00nF to 30.00mF • Frequency measurement 300.0Hz to 100.0 kHz • Temperature measurement with Pt 100/Pt 1000

RISH Multi 18S

Basic Accuracy 0.05%






• DC Voltage measurement 300.00mV to 1000.0V

• AC Voltage measurement 300.00mV to 1000.0V

• DC Current measurement 300.00mA to 10.000A

• AC current measurement 300.00mA to 10.000A


• Diode Continuity

• Event Counter, Stop-Watch, dB measurement

• Wide range capacitance measurement 3.000nF to 10000mF



Rish Multi 20 CAT IV

Basic Accuracy- 0.02 % of reading.

• Triple Display: Simultaneous measurement of voltage and frequency or voltage and min, max values is possible.

• High Resolution and Precision: 5 ¾ places (309,999digits) for DC measured quantities and 4 ¾ places (30,999 digits) for AC measured quantities.

• TRMS measurement with distorted waveform.

• Automatic Terminal Blocking System.

• Auto & Manual Ranging.

• Protective Rubber Holster for rough duty applications.

• Min / Max value storage, Data hold.

• Power Economizing Circuit & Overload Warning.

• Backlit LCD display, Analog scale (Bar Graph).

Rish MIT 30

Insulation resistance measurement up to 3GΩ. • Test Voltages selection: 50 V, 100V, 250V, 500V and 1000V. • True RMS Measurement • AC Current measurement with clip-on sensor upto 300A AC. • Display with Backlit. • Auto Power Off. • Interface and software RISH com 100. • Analog Scale that updates at the rate 20 times/sec to observe fluctuations in input. • AUTO and MANUAL ranging modes. • DATA Hold Function. • Longer Battery life.

RISH Max 10

Basic DC Volts Accuracy 0.5%


• AC Voltage measurement 400.0mV to 1000V




• Diode continuity, % Duty Cycle

• Capacitance measurement 5.000nF to 200.0mF


• Temperature measurement with K type thermocouple

• Relative measurement (REL)

• Energy Saving circuit


• Hold Function facility

• Protective cover for rough operating conditions

• Automatic/manual measuring range selection

RISH Max 14

Basic DC Volts Accuracy 0.5%


• AC Voltage measurement 400.0mV to 600V




• Diode and Continuity Testing

• Capacitance measurement 4.000nF to 40.00µF


• Selection of input resistance for voltage measurement


• Hold Function facility

• Protective cover for rough operating conditions

• Automatic/manual measuring range selection

• Power Economizing circuit

KUSAM MECO

PROFESSIONAL GRADE DIGITAL MULTIMETERS

KM857

NEW 5 4/5 Digits HAND HELD DIGITAL MULTIMETER 50000/500,000 countsMODEL KM859CF

DISPLAY : 4-4/5 digits 50,000 counts. Selectable stable mode 5-4/5 digits 500,000 counts for DC Voltage, & 6 digits 999,999 counts for frequency.

POLARITY : Automatic

UPDATE RATE : 4-4/5digits fast mode : 5 per second nominal; 5-4/5 digits stable mode : 1.25 per second nominal; 42 Segments Bar Graph : 60 per second max

LOW BATTERY : Below approx. 7V

OPERATING TEMPERATURE : 0°C to 45°C humidity 80% for temperature upto 30°C decreasing linearly to 50%R.H. at 45°C.

STORAGE TEMPERATURE : -20°C to 60°C, 80% R.H. (With battery removed)

SENSING : AC, AC+DC True RMS

POWER SUPPLY : Single alkaline 9V battery.

POWER CONSUMPTION : 5 mA typical

APO TIMING : Idle for 4.5 minutes

APO CONSUMPTION : 20 A

DIMENSION : 186(L)mm X 87(W)mm X 35.5(H)mm; 198(L)mm X 97(W)mm X 55(H)mm with holster

WEIGHT : 390 gm; 500 gm with holster Approx.

STANDARD ACCESSORIES : Test leads (pair), holster, battery installed, user's manual, banana plug K type Thermocouple x1(KM859CF only), Tilt stand.

OPTIONAL ACCESSORIES : PC interface Kit (RS232 optical adapter cable + RS232 Software CD)

KM515

MOBILE-LOGGER (43000 points) DIGITAL MULTIMETERMODEL- KM511

DISPLAY : 3-5/6 digits 5000 counts LCD display

UPDATE RATE : Digital Data : 5 per second nominal; 52 Segments Bar graph : 60 per second nominal

LOW BATTERY : Below approx. 7V

OPERATING TEMPERATURE : 0°C to 35°C, 0-80% R.H.; 35°C to 50°C, 0-70% R.H.

STORAGE TEMPERATURE : -20°C to 60°C, 80% R.H. (With battery removed)

POWER SUPPLY : Single alkaline 9V battery

SENSING : True RMS for KM511 & KM515

APO TIMING : Idle for 17 minutes

POWER CONSUMPTION : 2.7 mA typical

DIMENSION : (L) 186mm X (W) 87mm X (H) 35.5mm; (L) 198mm X (W) 97mm X (H) 55mm with holster

WEIGHT : 340 gm; 430 gm with holster Approx.

SPECIAL FEATURES : Data Hold; Back lighted display; On screen data logging 5400 points for KM511 & 43000 points for KM515 with selectable sampling interval 0.05, 1,20, 40, 60, 120, 240, & 480 seconds

ACCESSORIES : Test leads (pair), holster, battery installed, user's manual, banana plug K type thermocouple, Tilt stand.

OPTIONAL ACCESSORIES : PC interface Kit (RS232 optical adapter cable + software cd)

KM 655

DIGITAL MULTIMETER WITH EF-DETECTIONMODEL

1. 3-5/6 Digits 6000 Counts Large Easy to read LCD display 2. Transient protection up to 8KV 1.2/50S lightning surge.3. Fully Auto-Ranging 4. Max/Min Recording Mode 5. Low Battery Indication 6. Non-Contact EF-Detection (NCV)

7. Probe-Contact EF-Detection for more precise Indication of live.8. ACV 0.1mV to 1000V

9. DCV 0.1mV to 1000V10. ACA 0.001A to 10A 11. DCA 0.001A to 10A 12. Ohm 0.1 to 60 M 13. Capacitance 60nF to 2000F 14. Diode Tester Line level Frequency 40Hz to 60 KHz 15. Rugged Fire retarded double injected casing.

16. 600V (Input protection in all Ranges).17. 0.5% Basic DCV Accuracy18. Fast Measurements, 5/Sec19. Intelligent Auto Power Off20. Data HOLD21. Beep-Jack Input warning against improper A-terminal plug in22. Fast Audible continuity < 100S23. Battery access door with probe holders 24. LVD meets EN61010-1 CAT III 1KV & CAT IV 600V25. Transient Protection : 8 KV lightning surge (1.2/50s). 26. EMC EN61326 (97,98/A1) / EN 61000-4-2 (95) / EN61000-4-3(96)

405

4½ DIGIT 19999 COUNTS TRUE RMS DIGITAL MULTIMETER MODEL

1. Display : 4½ digit LCD display (19999 Counts)2. Digit Size : 17mm(H)

3. CE approved4. IEC - 1010 Overload Category II5. DATA HOLD facility6. Power Consumption : 14mW Typical7. Auto Power Off : Meter automatically shuts down after approx. 45 min. of the last reading8. Polarity : Automatic (-) negative polarity indication9. Operating Temperature : 0°C to 50°C, < 70% R.H.10. Storage Temperature : -20°C to 60°C, < 80% R.H. With battery removed from meter

11. Dimension : 189mm(L) x 87mm(W) x 37mm(H)

12. Resistance, Diode test & Audible Continuity, Logic Test, Frequency, & Duty Cycle Function.13. Accessories : Test Leads, Carrying Case, User Manual, Battery, Tilt Stand, Protective Holster

5040

3-5/6 DIGIT 5000 COUNTS PROFESSIONAL GRADE DIGITAL MULTIMETER WITH ANALOG BAR GRAPH & RS-232 COMPUTER INTERFACE. MODEL

1. Display : 3-5/6 digit LCD display (5000 Counts)2. Digit Size : 18mm(H)

3. Professional Grade Digital Multimeter with optically Isolated RS 232 PC interface capability4. Data Hold facility5. Fully Auto-Ranging6. Back-lighted large LCD Display.7. Analog 52 segment BAR GRAPH Display8. EN61010-1 approval. CAT II. 1KV AC/DC & CAT III 600V AC/DC.9. Fire retardant case with protective Holster.10. Fast measurement 5 times/Sec. 600V Input protection.11. Low Battery : Below approx. 7V.12. Sensing : Average sensing.13. Transient protection upto 8KV/1.2/50S Light Surge.14. Operating Temperature : 0°C to 40°C, 0-80% R.H (with battery removed).15. Storage Temperature : -20°C to 60°C, 0-80% R.H. (With Battery Removed )16. Power Consumption : 2.6mA Typical.17. Auto Power Off timing : Idle for 17 minutes18. Dimension : 186mm(L) x 87mm(W) x 35.5mm(H)19. Weight : Approx. 430g. With holster.

20. Accessories : Test Leads, Holster, Carrying Case, User Manual, Battery. Optional PC interface kit (RS

232 optical adapter cable + RS232 Software floppies / CD), Tilt stand.

INDUSTRIAL GRADE DIGITAL MULTIMETERS

KM 6050

POWER SUPPLY 9V BATTERY.

LCD SIZE 65 X 35mm

METER WEIGHT 780g

SIZE 205 X 100 X 60mm

STANDARD ACCESSORIES TEST LEAD, BATTERY, MANUAL, HOLSTER, CARRYING CASE.

DC VOLTAGE 200mV/2V/20V/200V/1000V Ã‚Â± (0.05% rdg+5dgts)

AC VOLTAGE 2V/20V/200V/700V Ã‚Â± (0.8% rdg+3dgts)

DC CURRENT 2mA/20mA/200mA/20A Ã‚Â± (0.8% rdg+3dgts)

AC CURRENT 2mA/20mA/200mA/20A Ã‚Â± (0.8% rdg+3dgts)

RESISTANCE 200/2K/20K/200K/2M/20M/200M Ã‚Â± (0.8% rdg+1dgts)

CAPACITANCE 2nF / 20nF / 200nF / 2F / 200F Ã‚Â± (2.5% rdg+3dgts) FREQUENCY (Hz)

20KHz

Ã‚Â±

(2.0% rdg+5dgt)

multi meters

Documents