www.intertec.info

MULTIBOX 25

KD121-10e MULTIBOX 25 Page 1/1

}}

Made of hot-pressed glassfibre reinforced polyester(GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel

Colour: light grey, RAL 7032 UV-resistant Protection class IP65 EPDM seal Weight approx. 6kg

For further technical details see data sheet KD015

Heat transition Coefficient K

without window with window

Standard 2,5 W/K 2,9 W/K

arctic….. 0,9 W/K 1,3 W/K

Designs (Locking-type see data sheet KD152) SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,

with angle for optional padlock

Lid Propstay (only design SE) DF in galvanized steel 1 pcs.

DFVA in stainless steel 2 pcs.

Window (see data sheet KD153 and KD154) FA acrylic glass window

mounted in

TE TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation PU-foam, not stackable

arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining

Explosion Protection GO antistatic to avoid electrostatic charges

according to DIN EN IEC 60079-0 Ex p preparation for pressurization according

to DIN EN IEC 60079-2

Protection Class IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

Dimensions Height Width Depth in mm (approx.) 485 x 385 x 240

TU female 130mm

TE male

110mmin TE or TU

TU TE

Ordering example.: MULTIBOX 25 SE DFVA FS TU arctic-PP GO

www.intertec.info

MULTIBOX 48

KD122-10e MULTIBOX 48 Page 1/1

}

}

Made of hot-pressed glassfibre reinforced polyester(GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel

Colour: light grey, RAL 7032 UV-resistant Protection class IP65 EPDM seal Weight approx. 7kg

For further technical details see data sheet KD015

Designs (locking-type see data see KD152) SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,

with angle for optional padlock

Lid Propstay (only design SE)

DF in galvanized steel 1 pcs.

DFVA in stainless steel 2 pcs.

Window (see data sheet KD153 and KD154) FA acrylic glass window mounted in

TE TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation PU-foam, not stackable

arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining

Explosion Protection GO antistatic to avoid electrostatic charges

according to DIN EN IEC 60079-0 Ex p preparation for pressurization according

to DIN EN IEC 60079-2

Protection Class IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

Dimensions Height Width Depth in mm (approx.) 485 x 385 x 380

Heat transition Coefficient K

without window with window

Standard 4,4 W/K 4,9 W/K

arctic….. 1,2 W/K 1,6 W/K

TU TE

Ordering example: MULTIBOX 48 SE DFVA FS TU arctic-PP GO

TU female 130mm

TE male

250 mm

in TE or TU

www.intertec.info

MULTIBOX 60

KD123-10e MULTIBOX 60 Page 1/1

}

}

Made of hot-pressed glassfibre reinforced polyester (GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel

Colour: light grey, RAL 7032 UV- resistant

Protection class IP65 EPDM seal

Weight approx. 8kg

For further technical details see data sheet KD015

Heat transition coefficient K

without window with window

Standard 4,5 W/K 5,1 W/K

arctic….. 1,3 W/K 1,9 W/K

Designs (Locking-type see data sheet KD152)

SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,

with angle for optional padlock

Lid Propstay (only design SE)

DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.

Window (see data sheet KD153 and KD154)

FA acrylic glass window

mounted in

TE

TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation

PU-foam, not stackable

arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining

Explosion Protection

GO antistatic to avoid electrostatic charges

according to DIN EN IEC 60079-0 Ex p preparation for pressurization according

to DIN EN IEC 60079-2

Protection Class

IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

Dimensions Height Width Depth in mm (approx.) 640 x 440 x 250

TU female 100mm

TE male

150mm

in TE or TU

Ordering example: MULTIBOX 60 SE DFVA FS TU arctic-PP GO

www.intertec.info

MULTIBOX 70

KD124-10e MULTIBOX 70 Page 1/1

}

}

Made of hot-pressed glassfibre reinforced polyester (GRP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel

Colour: light grey, RAL 7032 UV- resistant

EPDM seal Protection class IP65

Weight approx. 8,5kg

For further technical details see data sheet KD015

Designs (Locking-type see data sheet KD152)

SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,

with angle for optional padlock

Lid Propstay (only design SE)

DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.

Window (see data sheet KD153 and KD154)

FA acrylic glass window

mounted in

TE TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation

PU-foam, not stackable arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining

Explosion Protection

GO antistatic to avoid electrostatic charges

according to DIN EN IEC 60079-0 Ex p preparation for pressurization according

to DIN EN IEC 60079-2

Protection Class

IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

Dimensions Height Width Depth in mm (approx.) 640 x 440 x 340

Heat transition coefficient K

without window with window

Standard 5,4 W/K 6,0 W/K

arctic….. 1,7 W/K 2,3 W/K

TE male

150mm TU

female 190mm

in TE or TU

Ordering example: MULTIBOX 70 SE DFVA FS TU arctic-PP GO

INTERTEC Inst rumentat ion - Sarn ia , Ontar io - Houston, Texas - Phone: 1-888-875-8756

www.intertec.info

MULTIBOX 80

KD126-9c MULTIBOX 80 Page 1/1

} }

Made of hot-pressed glassfibre reinforced polyester (GRP) Two-part construction, so that equipment can be installed in either the shallow or the deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in 316 stainless steel

Color: light gray, RAL 7032 UV-resistant

Protection class IP65 EPDM seal

Weight approx 20.9lbs, 9,5kg

For further technical details see data sheet KD015

Dimensions Height Width Depth

in inch (approx.) 29.5“ x 20.5“ x 9.8“

in mm (approx.) 750 x 520 x 250

Designs (Locking-type see data sheet KD152)

SV 4 latches in 316 stainless steel SE 2 hinges and 2 latches in 316 stainless steel,

with angle for optional padlock

Lid Propstay (only design SE)

LP in plated steel 1 pcs. LPSS in stainless steel LPGF gas compression spring 2 pcs.

Window (see data sheet KD153 and KD154)

FA acrylic glass window

mounted in

TE

TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation

PU foam, not stackable arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining

Explosion protection

GO antistatic to avoid electrostatic charges according to DIN EN IEC 60079-0

Ex p preparation for pressurization according to DIN EN IEC 60079-2

Protection Class

IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

Heat transition coefficient K without window with window

Standard 6.8 W/K 7.2 W/K

arctic….. 1.8 W/K 2.5 W/K

27

.6/

70

0

5.5/ 140

4.3/ 110

9.8/ 250 15.8/ 400

20.5/ 520

24

.8/

63

0

29

.5/

75

0

Window 21.3x12.2/ 540x310

in TE or TU

0.6/ 15

0.1/ 3.5

18

.5/

47

0

Mounting element

Tapped hole M10x0.5“/ M10x13 mm deep

Washer

M1

0

0.2/ 5

0.6 /15

0.4 /9

1.7/ 42

TU female

5.5/ 140

TE male

4.3/110

Ordering Example: MULTIBOX 80 SE LPSS FS TU arctic-PP GO DimdddddDimensions in inches/ mm

www.intertec.info

MULTIBOX 100

KD125-10e MULTIBOX 100 Page 1/1

}

}

Made of hot-pressed glassfibre reinforced polyester (GfP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel

Colour: light grey, RAL 7032 UV- resistant

Protection class IP65 EPDM seal

Weight approx. 9,5kg

For further technical details see data sheet KD015

Designs (Locking-type see data sheet KD152)

SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,

with angle for optional padlock

Lid Propstay (only design SE)

DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.

Window (see data sheet KD153 and KD154)

FA acrylic glass window

mounted in

TE

TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation

PU-foam, not stackable arctic-PP Polypropylene-lining

arctic-Alu Alu-foil-lining

Explosion Proof

GO antistatic to avoid electrostatic charges

according to DIN EN IEC 60079-0 Ex p preparation for pressurization according

to DIN EN IEC 60079-2

Protection Class

IP66 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

Dimensions Height Width Depth in mm (approx.) 640 x 440 x 430

Heat transition coefficient K

without window with window

Standard 6,8 W/K 7,4 W/K

arctic….. 1,9 W/K 2,5 W/K

TE male

150 mm

TU female

280 mm

in TE or TU

Ordering example: MULTIBOX 100 SE DFVA FS TU arctic-PP GO

www.intertec.info

MULTIBOX 150

KD127-9e MULTIBOX 150 Page 1/1

}

}

Made of hot-pressed glassfibre reinforced polyester (GfP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel

Colour: light grey, RAL 7032 UV- resistant

Protection class IP65 EPDM seal

Weight approx. 12kg

For further technical details see data sheet KD015

Dimensions Heigth Width Depth in mm (approx.) 750 x 520 x 430

Heat transition coefficient K

without window with window

Standard 8,5 W/K 9,2 W/K

arctic….. 2,3 W/K 3,0 W/K

Designs (Locking-type see data sheet KD152)

SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,

with angle for optional padlock

Lid Propstay (only design SE)

DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.

Window (see data sheet KD153 and KD154)

FA acrylic glass window

mounted in

TE

TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation

PU-foam, not stackable

arctic-PP Polypropylene-lining arctic-Alu PU-foam, Alu-foil-lining

Explosion Protection

GO antistatic to avoid electrostatic charges according to DIN EN IEC 60079-0

Ex p preparation for pressurization according to DIN EN IEC 60079-2

Protection Class

IP66 IP67 IP68 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

TU Female 140mm

TE Male

290mm

in TE or TU

Ordering example: MULTIBOX 150 SE DFVA FS TU arctic-PP GO

www.intertec.info

MULTIBOX 170

KD128-9e MULTIBOX 170 Page 1/1

}

}

Made of hot-pressed glassfibre reinforced polyester (GfP) Two-part construction, equipment can be installed in either the shallow or deep part. Stackable design for space saving storage and transport Low flammability and self-extinguishing 4 mounting elements in stainless steel

Colour: light grey, RAL 7032 UV- resistant

Protection class IP65 EPDM seal

Weight approx. 12,5kg

For further technical details see data sheet KD015

Dimensions Height Width Depth in mm (appprox.) 750 x 520 x 480

Heat transition coefficient K

without window with window

Standard 9,1 W/K 9,8 W/K

arctic….. 2,4 W/K 3,1 W/K

Designs (Locking-type see data sheet KD152)

SV 4 clasps in stainless steel SE 2 hinges and 2 clasps in stainless steel,

with angle for optional padlock

Lid Propstay (only design SE)

DF in galvanized steel 1 pcs. DFVA in stainless steel DFGF gas compression spring 2 pcs.

Window (see data sheet KD153 and KD154)

FA acrylic glass window

mounted in

TE

TU

FS safety glass window STA hinged door of acrylic glass

arctic additional Insulation

PU-foam, not stackable

arctic-PP Polypropylene-lining arctic-Alu Alu-foil-lining

Explosion Protection

GO antistatic to avoid electrostatic charges

according to DIN EN IEC 60079-0 Ex p preparation for pressurization according

to DIN EN IEC 60079-2

Protection Class

IP66 IP67 IP 68 CSA Enclosure Type 4X (NEMA 4X)

Vents and Drains (see data sheet KD184)

Ordering example: MULTIBOX 170 SE DFVA FS TU arctic-PP GO

TU Female 140mm

TE

Male 340mm

in TE or TU