multilayer ceramic leaded capacitors

Multilayer Ceramic Leaded Capacitors

062821-1

– multilayer ceramic leaded capacitors –

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

IMPORTANT INFORMATION/DISCLAIMER

All product specifications, statements, information and data (collectively, the “Information”) in this datasheet or made available on the website are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KYOCERA AVX’s knowledge of typical operating conditions for such applications, but are not intended to constitute and KYOCERA AVX specifically disclaims any warranty concerning suitability for a specific customer application or use.

ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY.

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KYOCERA AVX with reference to the use of KYOCERA AVX’s products is given without regard, and KYOCERA AVX assumes no obligation or liability for the advice given or results obtained.

Although KYOCERA AVX designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Unless specifically agreed to in writing, KYOCERA AVX has not tested or certified its products, services or deliverables for use in high risk applications including medical life support, medical device, direct physical patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control, flammable environments, or any other potentially life critical uses. Customer understands and agrees that KYOCERA AVX makes no assurances that the products, services or deliverables are suitable for any high-risk uses. Under no circumstances does KYOCERA AVX warrant or guarantee suitability for any customer design or manufacturing process.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.

121119

http://www.avx.com/disclaimer/


The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

NOTICE: Specifications are subject to change without notice. Contact your nearest KYOCERA AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications.

© AVX Corporation

MULTILAYER CERAMIC LEADED CAPACITORSTable of Contents

THE CAPACITOR ................................................................................................................................................................................................................................ 1

DIELECTRICSC0G (NP0) Dielectric “A” ....................................................................................................................................................................................................................... 9X7R Dielectric “C” ................................................................................................................................................................................................................................. 10X5R Dielectric “D” ................................................................................................................................................................................................................................. 11X8R Dielectric “F” ................................................................................................................................................................................................................................. 12Z5U Dielectric “E” ................................................................................................................................................................................................................................. 13

RADIAL LEADSSkyCap®/SR Series .............................................................................................................................................................................................................................. 14SkyCap®/SL Series ............................................................................................................................................................................................................................... 18SkyCap®/AR Series – Automotive ...................................................................................................................................................................................................... 22SkyCap® Configurations ...................................................................................................................................................................................................................... 29Ceralam® ............................................................................................................................................................................................................................................. 31Packaging............................................................................................................................................................................................................................................. 35

TWO PIN DIPDIPGuard® ........................................................................................................................................................................................................................................... 37

AXIAL LEADSSpinGuard®/SA Series ......................................................................................................................................................................................................................... 39SpinGuard® - AA Series ........................................................................................................................................................................................................................ 44Ceralam® ............................................................................................................................................................................................................................................. 47Packaging............................................................................................................................................................................................................................................. 51

MILITARYMIL-PRF-39014

Radial Leads....................................................................................................................................................................................................................................... 52Axial Leads ......................................................................................................................................................................................................................................... 562Pin DIP .............................................................................................................................................................................................................................................. 60

MIL-C-11015Radial Leads....................................................................................................................................................................................................................................... 66Axial Leads ......................................................................................................................................................................................................................................... 68

MIL-PRF-20Radial Leads....................................................................................................................................................................................................................................... 70Axial Leads ......................................................................................................................................................................................................................................... 72Marking .............................................................................................................................................................................................................................................. 75

MIL-PRF-123How to Order / Cross Reference....................................................................................................................................................................................................... 76Radial Leads....................................................................................................................................................................................................................................... 77Axial Leads ......................................................................................................................................................................................................................................... 782 Pin DIP ............................................................................................................................................................................................................................................. 81Marking .............................................................................................................................................................................................................................................. 82

EUROPEAN CECCDetail Specifications ............................................................................................................................................................................................................................ 83



The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 1

GENERAL DESCRIPTIONA capacitor is a component which is capable of storing electrical energy. It consists of two conductive plates (electrodes) separated by insulating material which is called the dielectric. A typical formula for determining capacitance is:

C = capacitance (picofarads) K = dielectric constant (Vacuum = 1) A = area in square inches t = separation between the plates in inches

(thickness of dielectric) .224 = conversion constant

(.0884 for metric system in cm)

Capacitance – The standard unit of capacitance is the farad. A capacitor has a capacitance of 1 farad when 1 coulomb charges it to 1 volt. One farad is a very large unit and most capacitors have values in the micro (10-6), nano (10-9) or pico (10-12) farad level.

Dielectric Constant – In the formula for capacitance given above the dielectric constant of a vacuum is arbitrarily chosen as the number 1. Dielectric constants of other materials are then compared to the dielectric constant of a vacuum.

Dielectric Thickness – Capacitance is indirectly proportional to the separation between electrodes. Lower voltage requirements mean thinner dielectrics and greater capacitance per volume.

Area – Capacitance is directly proportional to the area of the electrodes. Since the other variables in the equation are usually set by the performance desired, area is the easiest parameter to modify to obtain a specific capacitance within a material group.

Energy Stored – The energy which can be stored in a capacitor is given by the formula:

E = energy in joules (watts-sec) V = applied voltage C = capacitance in farads

Potential Change – A capacitor is a reactive component which reacts against a change in potential across it. This is shown by the equation for the linear charge of a capacitor:

where I = Current C = Capacitance dV/dt = Slope of voltage transition across capacitor

Thus an infinite current would be required to instantly change the potential across a capacitor. The amount of current a capacitor can “sink” is determined by the above equation.

Equivalent Circuit – A capacitor, as a practical device, exhibits not only capacitance but also resistance and inductance. A simplified schematic for the equivalent circuit is:

R

L R

C

P

S

C = Capacitance L = InductanceRs = Series Resistance Rp = Parallel Resistance

Reactance – Since the insulation resistance (Rp) is normally very high, the total impedance of a capacitor is:

whereZ = Total ImpedanceRs = Series ResistanceXC = Capacitive Reactance =

XL = Inductive Reactance =

The variation of a capacitor’s impedance with frequency determines its effectiveness in many applications.

Phase Angle – Power Factor and Dissipation Factor are often confused since they are both measures of the loss in a capacitor under AC application and are often almost identical in value. In a “perfect” capacitor the current in the capacitor will lead the voltage by 90°.

THE CAPACITOR

111319



The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.2

I (Ideal)I (Actual)

PhaseAngle

LossAngle

VIR s

φ

In practice the current leads the voltage by some other phase angle due to the series resistance Rs. The complement of this angle is called the loss angle and:

Power Factor (P.F.) = Cos φ or Sine δDissipation Factor (D.F.) = tan δ

for small values of the tan and sine are essentially equal which has led to the common interchangeability of the two terms in the industry.

Equivalent Series Resistance – The term E.S.R. or Equivalent Series Resistance combines all losses both series and parallel in a capacitor at a given frequency so that the equivalent circuit is reduced to a simple R-C series connection.

E.S.R. C

Dissipation Factor

The DF/PF of a capacitor tells what percent of the apparent power input will turn to heat in the capacitor.

The watts loss are:

Watts loss = (2 π fCV2) (D.F.)

Very low values of dissipation factor are expressed as their reciprocal for convenience. These are called the “Q” or Quality factor of capacitors.Insulation Resistance – Insulation Resistance is the resistance

measured across the terminals of a capacitor and consists principally of the parallel resistance RP shown in the equivalent circuit. As capacitance values and hence the area of dielectric increases, the I.R. decreases and hence the product (C x IR or RC) is often specified in ohm farads or more commonly megohm microfarads. Leakage current is determined by dividing the rated voltage by IR (Ohm’s Law).

Dielectric Strength – Dielectric Strength is an expression of the ability of a material to withstand an electrical stress. Although dielectric strength is ordinarily expressed in volts, it is actually dependent on the thickness of the dielectric and thus is also more generically a function of volts/mil.

Dielectric Absorption – A capacitor does not discharge instantaneously upon application of a short circuit, but drains gradually after the capacitance proper has been discharged. It is common practice to measure the dielectric absorption by determining the “reappearing voltage” which appears across a capacitor at some point in time after it has been fully discharged under short circuit conditions.

Corona – Corona is the ionization of air or other vapors which causes them to conduct current. It is especially prevalent in high voltage units but can occur with low voltages as well where high voltage gradients occur. The energy discharged degrades the performance of the capacitor and can in time cause catastrophic failures.

CERAMIC CAPACITORSMultilayer ceramic capacitors are manufactured by mixing the ceramic powder in an organic binder (slurry) and casting it by one technique or another into thin layers typically ranging from about 3 mils in thickness down to 1 mil or thinner.Metal electrodes are deposited onto the green ceramic layers which are then stacked to form a laminated structure. The metal electrodes are arranged so that their terminations alternate from one edge of the capacitor to another. Upon sintering at high temperature the part becomes a monolithic block which can provide extremely high capacitance values in small mechanical volumes. Figure 1 shows a pictorial view of a multilayer ceramic capacitor.Multilayer ceramic capacitors are available in a wide range of characteristics, Electronic Industries Association (EIA) and the military have established categories to help divide the basic characteristics into more easily specified classes. The basic industry specification for ceramic capacitors is EIA specification RS-198 and as noted in the general section it specifies temperature compensating

THE CAPACITOR

111319




capacitors as Class 1 capacitors. These are specified by the military under specification MIL-PRF-20. General purpose capacitors with non-linear temperature coefficients are called Class 2 capacitors by EIA and are specified by the military under MIL-C-11015 and MIL- PRF-39014. The new high reliability military specification, MIL- PRF-123 covers both Class 1 and Class 2 dielectrics.

Class 1 – Class 1 capacitors or temperature compensating capacitors are usually made from mixtures of titanates where barium titanate is normally not a major part of the mix. They have predictable temperature coefficients and in general, do not have an aging characteristic. Thus they are the most stable capacitor available. Normally the T.C.s of Class 1 temperature compensating capacitors are C0G (NP0) (negative-positive 0 ppm/°C). Class 1 extended temperature compensating capacitors are also manufactured in T.C.s from P100 through N2200.

Class 2 – General purpose ceramic capacitors are called Class 2 capacitors and have become extremely popular because of the high capacitance values available in very small size. Class 2 capacitors are “ferro electric” and vary in capacitance value under the influence of the environmental and electrical operating conditions. Class 2 capacitors are affected by temperature, voltage (both AC and DC), frequency and time. Temperature effects for Class 2 ceramic capacitors are exhibited as non-linear capacitance changes with temperature.

Figure 1

EIA Temperature Compensating Ceramic temperature characteristics in accordance with EIA-198.

CERAMICLAYER

ELECTRODE

TERMINATEEDGE

TERMINATEEDGE

ENDTERMINATIONS

ELECTRODES

MARGIN

THE CAPACITOR

111319




Table 2: MIL and EIA Temperature Stable and General Application Codes

MIL CODE

Symbol Temperature Range

ABC

-55°C to +85°C-55°C to +125°C-55°C to +150°C

Symbol Cap. Change Zero Volts

Cap. Change Rated Volts

R

W

X

Y

Z

+15%, -15%

+22%, -56%

+15%, -15%

+30%, -70%

+20%, -20%

+15%, -40%

+22%, -66%

+15%, -25%

+30%, -80%

+20%, -30%

Temperature characteristic is specified by combining range and change symbols, for example BR or AW. Specification slash sheets indicate the characteristic applicable to a given style of capacitor.

In specifying capacitance change with temperature for Class 2 materials, EIA expresses the capacitance change over an operating temperature range by a 3 symbol code. The first symbol represents the cold temperature end of the temperature range, the second represents the upper limit of the operating temperature range and the third symbol represents the capacitance change allowed over the operating temperature range. Table 2 provides a detailed explanation of the EIA system.

Effects of Voltage – Variations in voltage affects only the capacitance and dissipation factor. The application of DC voltage reduces both the capacitance and dissipation factor

while the application of an AC voltage within a reasonable range tends to increase both capacitance and dissipation factor readings. If a high enough AC voltage is applied, eventually it will reduce capacitance just as a DC voltage will. Figure 2 shows the effects of AC voltage.

Capacitor specifications specify the AC voltage at which to measure (normally 0.5 or 1 VAC) and application of the wrong voltage can cause spurious readings. Figure 3 gives the voltage coefficient of dissipation factor for various AC voltages at 1 kilohertz. Applications of different frequencies will affect the percentage changes versus voltages.

EIA CODEPercent Capacity Change Over Temperature Range

RS198 Temperature Range

X7X5Y5Z5

-55°C to +125°C-55°C to +85°C-30°C to +85°C+10°C to +85°C

Code Percent Capacity Change

DEFPRSTUV

±3.3%±4.7%±7.5%±10%±15%±22%

+22%, -33%+22%, - 56%+22%, -82%

EXAMPLE – A capacitor is desired with the capacitance value at 25°C to increase no more than 7.5% or decrease no more than 7.5% from -30°C to +85°C. EIA Code will be Y5F.

50

40

30

20

10

012.5 25 37.5 50

Volts AC at 1.0 KHz

Cap

acita

nce

Cha

nge

Per

cent

Curve 3 - 25 VDC Rated CapacitorCurve 2 - 50 VDC Rated CapacitorCurve 1 - 100 VDC Rated Capacitor Curve 3

Curve 2

Curve 1

.5 1.0 1.5 2.0 2.5AC Measurement Volts at 1.0 KHz

Dis

sip

atio

n Fa

ctor

Per

cent

10.0

8.0

6.0

4.0

2.0

0

Cap. Change vs. A.C. VoltsAVX X7R T.C.

D.F. vs. A.C. Measurement VoltsAVX X7R T.C.

Figure 2 Figure 3

THE CAPACITOR

111319




The effect of the application of DC voltage is shown in Figure 4. The voltage coefficient is more pronounced for higher K dielectrics. These figures are shown for room temperature conditions. The combination characteristic known as voltage temperature limits which shows the effects of rated voltage over the operating temperature range is shown in Figure 5 for the military BX characteristic.

25% 50% 75% 100%

Percent Rated Volts

Cap

acita

nce

Cha

nge

Per

cent 2.5

0

-2.5

-5

-7.5

-10

Cap. Change vs. D.C. VoltsAVX X7R T.C.

0VDC

RVDC

-55 -35 -15 +5 +25 +45 +65 +85 +105 +125

Temperature Degrees Centigrade

Cap

acita

nce

Cha

nge

Per

cent

+20

+10

0

-10

-20

-30

Typical Cap. Change vs. TemperatureAVX X7R T.C.

AVX C0G (NP0) T.C.

AVX X7R T.C.

1 10 100 1 10 100 1KHz KHz KHz MHz MHz MHz GHz

Frequency

Cap

acita

nce

Cha

nge

Per

cent

0

-10

-20

-30

Cap. Change vs. Frequency

Figure 4

Figure 7

Figure 5

Figure 6

AVX C0G (NP0) T.C.

AVX X7R T.C.

1 10 100 1 10 100 1KHz KHz KHz MHz MHz MHz GHz

Frequency

2000

1600

1200

800

400

0

"Q"

Fac

tor

“Q” vs. Frequency

Effects of Frequency – Frequency affects capacitance and dissipation factor as shown in Figures 6 and 7.

Variation of impedance with frequency is an important consideration for decoupling capacitor applications. Lead length, lead configuration and body size all affect the impedance level over more than ceramic formulation variations. (Figure 8)

Effects of Time – Class 2 ceramic capacitors change capacitance and dissipation factor with time as well as temperature, voltage and frequency. This change with time is known as aging. Aging is caused by a gradual re-alignment of the crystalline structure of the ceramic and produces an exponential loss in capacitance and decrease in dissipation factor versus time. A typical curve of aging rate for semistable ceramics is shown in Figure 9 and a table is given showing the aging rates of various dielectrics.

If a ceramic capacitor that has been sitting on the shelf for a period of time, is heated above its curie point, (125°C for 4 hours or 150°C for 1⁄2 hour will suffice) the part will de-age and return to its initial capacitance and dissipation factor readings. Because the capacitance changes rapidly, immediately after deaging, the basic capacitance measurements are normally referred to a time period sometime after the de-aging process. Various manufacturers use different time bases but the most popular one is one day or twenty-four hours after “last heat.” Change in the aging curve can be caused by the application of voltage and other stresses. The possible changes in capacitance due to de-aging by heating the unit explain why capacitance changes are allowed after test, such as temperature cycling, moisture resistance, etc., in MIL specs. The application of high voltages such as dielectric withstanding voltages also tends to de-age capacitors and is why re-reading of capacitance after 12 or 24 hours is allowed in military specifications after dielectric strength tests have been performed.

THE CAPACITOR

111319




Figure 8

.001mF

.01mF

.1mF

.33mF

1 10 100 1000Log Frequency, MHz

Log

Imp

edan

ce, O

hms

10.00

1.00

0.10

0.01

1 10 100 200

Log Frequency, MHz

Log

Imp

edan

ce, O

hms

10.0

1.0

0.1

C0G

(NP0)

.001 F

X7R .01 F

X7R .022 F

X7R .047 F

X7R 0.1 FZ5U

.22 F

1 10 100 1000Log Frequency, MHz

Log

Imp

edan

ce, O

hms

10.0

1.0

0.1

100.0 .500".250".062" 0"

Impedance vs. FrequencyEffect of Dielectric – AVX DIPGuards

Impedance vs. FrequencyEffect of Lead Length – Military CKR05 .01mF

Impedance vs. FrequencyEffect of Capacitance – AVX SpinGuards

1 10 100 1000 10,000 100,000 Hours

Cap

acita

nce

Cha

nge

Per

cent

+1.5

0

-1.5

-3.0

-4.5

-6.0

-7.5

Characteristic Max. Aging Rate %/Decade C0G (NP0)X7RZ5UY5V

None235

Figure 9

Typical Curve of Aging RateX7R Dielectric

Effects of Mechanical Stress – High “K” dielectric ceramic capacitors exhibit some low level piezoelectric reactions under mechanical stress. As a general statement, the piezoelectric output is higher, the higher the dielectric constant of the ceramic. It is desirable to investigate this effect before using high “K” dielectrics as coupling capacitors in extremely low level applications.

Reliability – Historically ceramic capacitors have been one of the most reliable types of capacitors in use today. The approximate formula for the reliability of a ceramic capacitor is:

where

Lo = operating life Tt = test temperature andLt = test life To = operating temperature in °CVt = test voltageVo = operating voltage X,Y = see text

Historically for ceramic capacitors exponent X has been considered as 3. The exponent Y for temperature effects typically tends to run about 8.

THE CAPACITOR

111319




Many KYOCERA AVX ceramic capacitors are purchased in accordance with Military Specifications, MIL-PRF-39014, MIL-C-11015, MIL-PRF-20, MIL-PRF-55681, and MIL-PRF-123 or according to individual customer specification. When ordered to these specifications, the parts will meet the requirements set forth in these documents. The General Electrical and Environmental Specifications listed below detail test conditions which are common to the foregoing and to most ceramic capacitor specifications. If additional information is needed, KYOCERA AVX Application Engineers are ready to assist you.

Capacitance – Capacitance shall be tested in accordance with Method 305 of MIL-STD-202.

Class 1 dielectric to 1000 pF measured at 1 MHz, ± 100 KHz, > 1000 pF measured at 1 KHz ± 100 Hz both at 1.0 ± 0.2 VAC.

Class 2 dielectrics (except High K) to 100 pF shall be measured at 1 MHz ± 100 KHz, > 100 pF measured at 1 KHz ± 100 Hz both at 1.0 ± 0.2 VAC.High K dielectrics measured at 1 KHz ± 100 Hz with less than 1.5 VAC or less applied.

Dissipation Factor – D.F. shall be measured at the same frequency and voltage as specified for capacitance.

Dielectric Strength – The dielectric strength shall be measured in accordance with Method 301 of MIL-STD-202 with a suitable resistor in series with the power supply to limit the charging current to 50 ma. max.

Insulation Resistance – Insulation Resistance shall be measured in accordance with Method 302 of MIL-STD-202 with rated voltage or 200 VDC whichever is less applied. The current shall be limited to 50 ma. max. and the charging time shall be 2.0 minutes maximum.

Burn-In – (Where specified.) 100% of the parts shall be subjected to 5 cycles of Thermal Shock per Method 107 Test Condition A of MIL-STD-202 followed by voltage conditioning at twice rated voltage and maximum rated temperature for 100 hours or as specified. After Burn-In, parts shall meet all initial requirements.

Barometric Pressure – Capacitors shall be tested in accordance with Method 105 of MIL-STD-202 Test Condition D (100,000 ft.) with 100% rated voltage applied for 5 seconds with current limited to 50 ma. No evidence of flashover or damage is permitted.

Solderability – Capacitors shall be tested in accordance with Method 208 of MIL-STD-202 with 95% coverage of new solder.

Vibration – Capacitors shall be tested in accordance with Method 208 Test Condition D of MIL-STD-202 with the bodies rigidly clamped. The specimens shall be tested in 3 mutually perpendicular planes for a total of 8 hours with 125% rated DC voltage applied. No evidence of opens, intermittents or shorts

is permitted.

Shock – Capacitors shall be tested in accordance with Method 213 Condition 1 (100 Gs) of MIL-STD-202 with the bodies rigidly clamped. No evidence of opens, intermittents or shorts is permitted.

Thermal Shock and Immersion – Capacitors shall be tested in accordance with Method 107 Condition A of MIL-STD-202 with high test temperature (maximum rated operating temperature) followed by Method 104 of MIL-STD-202 Test Condition B.

Moisture Resistance – Capacitors shall be tested in accordance with Method 106 of MIL-STD-202 with rated voltage or 100 VDC whichever is less applied for the first 10 cycles.

Resistance to Solder Heat – Capacitors shall be tested in accordance with Method 210 of MIL-STD-202 with immersion to .050 of body. KYOCERA AVX Ceralam capacitors are manufactured with solder which melts at a temperature greater than 450°F.

General Considerations – The application of voltage or temperature usually causes temporary changes in the capacitance of Class 2 ceramic capacitors. These changes are normally in the positive direction and may cause out-of-tolerance capacitance readings. If a capacitance reading is made immediately after a dielectric strength or insulation resistance test and parts are high capacitance, they should be re-read after a minimum wait of 12 hours.

THE CAPACITORGeneral Electrical and Environmental Specifications

111319




BASIC CAPACITOR FORMULASI. Capacitance (farads)

II. Energy stored in capacitors (Joules, watt - sec)E = ½ CV2

III. Linear charge of a capacitor (Amperes)

IV. Total Impedance of a capacitor (ohms)

V. Capacitive Reactance (ohms)

VI. Inductive Reactance (ohms)xL = 2 π fL

VII. Phase Angles:Ideal Capacitors: Current leads voltage 90°Ideal Inductors: Current lags voltage 90°Ideal Resistors: Current in phase with voltage

VIII. Dissipation Factor (%)

IX. Power Factor (%)P.F. = Sine (loss angle) = Cos φ (phase angle)P.F. = (when less than 10%) = DF

X. Quality Factor (dimensionless)Q = Cotan (loss angle) =

XI. Equivalent Series Resistance (ohms)E.S.R. = (D.F.) (Xc) = (D.F.) / (2 π fC)

XII. Power Loss (watts)Power Loss = (2 π fCV2) (D.F.)

XIII. KVA (Kilowatts)KVA = 2 π fCV2 x 10 -3

XIV. Temperature Characteristic (ppm/°C)

XV. Cap Drift (%)

XVI. Reliability of Ceramic Capacitors

XVII. Capacitors in Series (current the same)

XVIII. Capacitors in Parallel (voltage the same)CT = C1 + C2 --- + CN

XIX. Aging RateA.R. = %∆ C/decade of time

XX. Decibels

METRIC PREFIXES - SYMBOLS

Pico X 10-12

Nano X 10-9

Micro X 10-6

Milli X 10-3

Deci X 10-1

Deca X 10+1

Kilo X 10+3

Mega X 10+6

Giga X 10+9

Tera X 10+12

K = Dielectric Constant f = frequency Lt = Test life

A = Area L = Inductance Vt = Test voltage

TD = Dielectric thickness δ = Loss angle Vo = Operating voltage

V = Voltage φ = Phase angle Tt = Test temperature

t = time X & Y = exponent effect of voltage and temp. To = Operating temperature

Rs = Series Resistance Lo = Operating life

THE CAPACITOR

111319




GENERAL SPECIFICATIONSCapacitance Range

See Individual Parts Specifications

Capacitance Test at 25°CMeasured at 1 VRMS max. at 1 KHz(1 MHz for 1,000 pF or less)

Capacitance TolerancesC = ±.25 pF, D = ±.50 pF, E = ±0.5%, F = ±1.0%, G = ±2%, H = ±3%, J = ±5%, K = ±10%, M = ±20% For values less than 10 pF tightest tolerance available is ±.25 pF

Operating Temperature Range-55°C to +125°C

Temperature Characteristic0 ± 30 ppm/°C

Voltage Ratings500, 200, 100 & 50 Vdc

Dissipation Factor.15% max. (+25°C and +125°C) for values greater than 30 pF or Q = 20 x C + 400 for values of 30 pF and below.1.0 VRMS, 1 MHz for values <?> 1,000 pF, and 1 KHz for values > 1,000 pF

Insulation Resistance 25°C (MIL-STD-202-Method 302)100 K megohms or 1000 megohms - μF minimum, whichever is less

Dielectric Strength250% of rated Vdc

Life Test (1,000 hours)200% rated voltage at +125°C

Moisture Resistance (MIL-STD-202-Method 106)

Thermal Shock (MIL-STD-202-Method 107, condition A, at rated elevated temperature)-55°C to +125°C

Immersion Cycling (MIL-STD-202-Method 104, condition B)

For current reliability information, consult factory.

TYPICAL CHARACTERISTICSTemperature Coefficient

Aging Rate

Voltage Coefficient

Insulation Resistance vs. Temp.

Typical Capacitance ChangeEnvelope: 0±30 ppm/°C

+0.5

0

-0.5

%

Cap

acita

nce

-55 -35 -15 +5 +25 +45 +65 +85 +105 +125Temperature °C

+0.1

+0.2

0

-0.1

-0.2

%

Cap

acita

nce

25 50 75 100 125 150 175 200

D. C. Volts Applied

+0.1

+0.2

0

-0.1

-0.2

%

Cap

acita

nce

1 10 100 1,000 10,000Hours

Insu

latio

n R

esis

tanc

e (O

hm-F

arad

s)

0

100

1,000

10,000

+25+20 +40 +60 +80 +100 +150 Temperature °C

C0G (NP0) Dielectric “A”DIELECTRICS

081816




GENERAL SPECIFICATIONSCapacitance Range

See Individual Parts Specifications

Capacitance Test at 25°CMeasured at 1 VRMS max. at 1 KHz

Capacitance TolerancesJ = ±5%, K = ±10%, M = ±20%


Temperature Characteristic± 15% (0 Vdc)

Voltage Ratings500, 200, 100 & 50 Vdc

Dissipation Factor2.5% max. at 1 KHz, 1 VRMS max.








TYPICAL CHARACTERISTICS

Temperature Coefficient

+6

%

Cap

acita

nce

-75 -50 -25 0 +25 +50 +75 +100 +125Temperature °C

+12

0

-6

-12

-18

-24

+10

%

Cap

acita

nce

+20

0

-10

-20

1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 MHzFrequency

%

Cap

acita

nce

+10

0

-10

-20

-30

-40

20 40 60 80 100

D.C. Volts Applied

100 Vdc Rated Parts

50/63 Rated Parts

Insu

latio

n R

esis

tanc

e (O

hm-F

arad

s)

10

100

1,000

10,000

+25+20 +40 +60 +80 +100 +150 Temperature °C

∆ Capacitance vs. Frequency

Voltage Coefficient


X7R Dielectric “C”

081816

DIELECTRICS




GENERAL DESCRIPTION• General Purpose Dielectric for Ceramic Capacitors• EIA Class II Dielectric• Temperature variation of capacitance is within ±15%

from -55ºC to +85ºC• Well suited for decoupling and filtering applications• Available in High Capacitance values (up to 100μF)

TYPICAL ELECTRICAL CHARACTERISTICS

%

Cap

acita

nce

-60 -40 -20 0 +20 +40 +60 +80

Temperature °C

Temperature Coefficient20

15

10

5

0

-5

-10

-15

-20

Insu

latio

n R

esis

tanc

e (O

hm-F

arad

s)

1,000

10,000

100

0

Insulation Resistance vs Temperature

0 20 12040 60 80

Temperature °C100

X5R Dielectric “D”

111319

DIELECTRICS




GENERAL SPECIFICATIONS

Capacitance RangeSee Individual Parts Specifications

Capacitance Test at 25°CMeasured at 1 VRMS max. at 1 KHz

Capacitance TolerancesJ = ±5%, K = ±10%, M = ±20%


Temperature Characteristic± 15% (0 Vdc)

Voltage Ratings50 Vdc

Dissipation Factor2.5% max. at 1 KHz, 1 VRMS max.








TYPICAL CHARACTERISTICS

%

Cap

acita

nce

-60 -40 -20 0 20 40 60 80 100 120 140 180

Temperature °C

X7R included forcomparison only

5.00

0.00

-5.00

-10.00

-15.00

-20.00

-25.00

X8R DielectricAR15, 50V, X8R Typical Temperature Coef�cient

X8R Dielectric “F”

090216

DIELECTRICS




GENERAL SPECIFICATIONS

Capacitance RangeSee Individual Parts Specifications

Capacitance Test at 25°CMeasured at 0.5 VRMS max. at 1 KHz

Capacitance TolerancesM = ±20%, Z = +80%, -20%, P = GMV*

Operating Temperature Range+10°C to +85°C

Temperature Characteristic+22%, -56%

Voltage Ratings100 & 50 Vdc

Dissipation Factor4.0% max. at 1 KHz, .5 VRMS max.

Insulation Resistance 25°C (MIL-STD-202-Method 302)10 K megohms or 100 megohms - μF minimum,whichever is less





For current reliability information, consult factory.*Guaranteed Minimum Value

TYPICAL CHARACTERISTICSTemperature Coefficient

+20

%

Cap

acita

nce

-40 -60 -20 0 +20 +40 +60 +80 +100 +120 +140Temperature °C

+30

0

-20

-40

-60

0

%

Cap

acita

nce

-10

-20

-30

-401 kHz 10 kHz 100 kHz 1 MHz 10 MHz 100 MHz

Frequency

10k

Insu

latio

n R

esis

tanc

e (O

hm-F

arad

s)

-40 -60 -20 0 +20 +40 +60 +80 +100 +120 +140Temperature °C

100k

1000

100

10

0

%

Cap

acita

nce

-20

-40

+20

-60

-80

0 25 50 75 100 125Volts D.C. Applied

Voltage coef�cient forindividual capacitorswithin this envelope must be calculated basedupon WVDC / MIL.

∆ Capacitance vs. Frequency


Voltage Coefficient

Z5U Dielectric “E”

111319

DIELECTRICS




GENERAL INFORMATIONSR Series

Conformally Coated Radial Leaded MLC

Temperature Coefficients: C0G (NP0), X7R, Z5U

200, 100, 50 Volts (300V, 400V & 500V also available)

Case Material: Epoxy

Lead Material: RoHS Compliant, 100% Tin

HOW TO ORDER Drawings are for illustrative purposes only.Actual lead form shape could vary within stated tolerances based on body size.

See Note

See Note

Dimen sions: Millimeter s (Inche s)

Note: Coating clean .784 (0.031) min.above seating plane

Styles SR15, SR20,SR30, SR40, SR50

Style SR21

Styles SR22, SR27

W Max.

W Max.

W Max.

Max. T

Max. T

Max. T

L.S.

L.S.

L.S.

H Max. H Max.

H Max.

LL Min.LL Min.

LL Min.

LD Nom.

LD Nom.

LD Nom.

1.52 (0.060)Max.

SR21 1045 E A R TR1M

StyleSR15SR20SR21SR22SR27SR30SR40SR50

CapacitanceFirst two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10pF use “R” in place of decimal point, e.g., 1R4 = 1.4pF.)

Capacitance Tolerance

TemperatureCoefficientA = C0G (NP0)C = X7RE = Z5U

Failure RateA = Not Applicable

LeadsR = RoHS

PackagingBlank: Bulk Packaging 1.0” minimum

of lead lengthT: Trimmed leads .230” ± .030”

Bulk packagingTR1: Tape and Reel PackagingAP1: Ammopack packaging

See packaging specification pages 33-34

Voltage5 = 50V1 = 100V2 = 200V9 = 300V8 = 400V7 = 500V

C0G (NP0): C = ±.25pF D = ±.5pF F = ±1%

(>50pF only) G = ±2%

(>25pF only) J = ±5% K = ±10%

X7R: J = ±5% K = ±10% M = ±20%

Z5U: M = ±20% Z = +80%

-20%

MARKING PACKAGING REQUIREMENTS

Capacitance CodeTolerance CodeVoltage CodeTemp. Char. Code

3 Digit Date Code

Lot Code

AVX Logo

Quantity per BagSR15, 20, 21, 22, 27, 30 1000 Pieces

SR40, 50 500 PiecesNote: SR15, SR20, SR21, SR30, and SR40 available on tape and reel per EIA

specifications RS-468. See Pages 33 and 34.

RADIAL LEADSSkyCap®/SR Series

081816




SIZE AND CAPACITANCE SPECIFICATIONS

EIA Characteristic Dimensions: Millimeters (Inches)

Style SR15 SR20 SR21 SR22 SR27 SR30 SR40 SR50 “Insertable” SR07 SR29 SR59 N/A N/A SR65 SR75 N/A

Width(W)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.604(.260)

7.62(.300)

10.16(.400)

12.70(.500)

Height(H)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.35(.250)

7.62(.300)

10.16(.400)

12.70(.500)

Thickness(T)

2.54(.100)

3.175(.125)

3.175(.125)

3.175(.125)

4.06(.160)

3.81(.150)

3.81(.150)

5.08(.200)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)

6.35(.250)

7.62(.300)

5.08(.200)

5.08(.200)

10.16(.400)

Lead Diameter (L.D.)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.635(.025)

Cap. in.* pF

Industry Preferred Values in Blue

WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 200 100 50 200 100 50 200 100 50 100 50 100 50 100 50

1.0-9.9 SR151A1R0DAR10 SR151A100KAR15 SR A150KAR22 SR A220KAR33 SR A330KAR39 SR A390KAR47 SR A470KAR68 SR A680KAR

100 SR151A101KAR150 SR A151KAR220 SR A221KAR330 SR A331KAR390 SR A391KAR470 SR A471KAR680 SR A681KAR

1000 SR211A102KAR1500 SR A152KAR2200 SR A222KAR3900 SR A392KAR4700 SR A472KAR

6800 SR A682KAR8200 SR A822KAR

10,000 SR A103KAR15,000 SR A153KAR22,000 SR A223KAR33,000 SR A333KAR39,000 SR A393KAR47,000 SR A473KAR68,000 SR A683KAR

100,000 SR A104KARFor other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory.

*Other capacitance values available upon special request.

= Industry preferred values= SR20 only

Capacitance ranges available for SR12 and SR07 same as SR15 SR62 and SR59 same as SR21 SR64 and SR65 same as SR30 SR75 same as SR40 SR13 same as SR21

NOTE: For others voltages, tolerances, electrical specifications and NPO typical characteristics, see the KYOCERA AVX Multilayer Ceramic Leaded Capacitors Catalog.

RADIAL LEADSC0G (NP0) Dielectric

081816




Style SR15 SR20 SR21 SR22 SR27 SR30 SR40 SR50 “Insertable” SR07 SR29 SR59 N/A N/A SR65 SR75 N/A

Width(W)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.604(.260)

7.62(.300)

10.16(.400)

12.70(.500)

Height(H)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.35(.250)

7.62(.300)

10.16(.400)

12.70(.500)

Thickness(T)

2.54(.100)

3.175(.125)

3.175(.125)

3.175(.125)

4.06(.160)

3.81(.150)

3.81(.150)

5.08(.200)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)

6.35(.250)

7.62(.300)

5.08(.200)

5.08(.200)

10.16(.400)


.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.635(.025)

Cap. in.* pF


WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 200 100 50 200 100 50 200 100 50 200 100 50 200 100 50 200 100 50

470 SR-----C471KAR1000 SR155C102KAR1500 SR-----C152KAR2200 SR-----C222KAR3300 SR-----C332KAR4700 SR-----C472KAR6800 SR-----C682KAR

10,000 SR215C103KAR15,000 SR-----C153KAR22,000 SR-----C223KAR33,000 SR-----C333KAR47,000 SR-----C473KAR68,000 SR-----C683KAR

100,000 SR215C104KAR150,000 SR-----C154KAR220,000 SR215C224KAR330,000 SR-----C334KAR390,000 SR-----C394KAR470,000 SR305C474KAR

1.0 uF SR305C105KAR2.2 uF SR405C225KAR2.7 uF SR505C275KAR4.7 uF SR505C475KAR

10.0 uF SR655C106KAR



For other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory.

= Industry preferred values= Extended range= Extended range with 0.150” thickness maximum

RADIAL LEADSX7R Dielectric

061620





Style SR15 SR20 SR21 SR22 SR27 SR30 SR40 SR50

“Insertable” SR07 SR29 SR59 N/A N/A SR65 SR75 N/A

Width(W)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.604(.260)

7.62(.300)

10.16(.400)

12.70(.500)

Height(H)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.35(.250)

7.62(.300)

10.16(.400)

12.70(.500)

Thickness(T)

2.54(.100)

3.175(.125)

3.175(.125)

3.175(.125)

4.06(.160)

3.81(.150)

3.81(.150)

5.08(.200)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)

6.35(.250)

7.62(.300)

5.08(.200)

5.08(.200)

10.16(.400)


.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.635(.025)

Cap. in.* pF


WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

10,000 SR155E103ZAR47,000 SR-----E473ZAR

100,000 SR215E104ZAR150,000 SR-----E154ZAR220,000 SR215E224ZAR330,000 SR215E334ZAR470,000 SR215E474ZAR680,000 SR-----E684ZAR

1.0 μF SR-----105ZAR1.5 μF SR30E155ZAR2.2 μF SR30E225ZAR3.3 μF SR30E335ZAR4.7 μF SR30E475ZAR


500 VOLT SKYCAPS**



= Industry preferred values= SR20 only

Capacitance ranges available for SR12 and SR07 same as SR15 SR62 and SR59 same as SR21 SR64 and SR65 same as SR30 SR75 same as SR40 SR13 same as SR21

NOTE: For others voltages, tolerances, electrical specifications and NPO typical characteristics, see the KYOCERA AVX Multilayer Ceramic Leaded Capacitors Catalog.

STYLE*MAXIMUM CAPACITANCE VALUE

C0G (NP0) X7RSR29 900 pF .015 μF

SR20 1800 pF .033 μF

SR28 SR59

900 pF .015 μF

SR13 SR21

1800 pF .033 μF

SR30SR61SR65

7200 pF .12 μF

SR40 SR75

.015 μF .27 μF

SR22 1800 pF .033 μF

SR27 1800 pF .033 μF

SR76 .015 μF .27 μF*Consult pages 27 and 28 for style sizes.

**Voltage rating based on DWV of 150% of rated voltage.

RADIAL LEADSZ5U Dielectric

081816




GENERAL INFORMATIONSL Series


Temperature Coefficients: C0G (NP0), X7R, Z5U

200, 100, 50 Volts (300V, 400V & 500V also available)


Lead Material: Solderable Sn/Pb


SL21 1045 E A B TR1M

StyleSL15SL20SL21SL22SL27SL30SL40SL50

CapacitanceFirst two digits are thesignificant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10pF use “R” in place of decimal point, e.g., 1R4 = 1.4pF.)


TemperatureCoefficientA = C0G (NP0)C = X7RE = Z5U


LeadsB = Leads Sn/Pb(Tin lead product)





Voltage5 = 50V1 = 100V2 = 200V9 = 300V8 = 400V7 = 500V

C0G (NP0): C = ±.25pF D = ±.5pF F = ±1%

(>50pF only) G = ±2%

(>25pF only) J = ±5% K = ±10%

X7R: J = ±5% K = ±10% M = ±20%

Z5U: M = ±20% Z = +80%

-20%



3 Digit Date Code

Lot Code

AVX Logo

Quantity per BagSL15, 20, 21, 22, 27, 30 1000 Pieces

SL40, 50 500 PiecesNote: SL15, SL20, SL21, SL30, and SL40 available on tape and reel per EIA

specifications RS-468. See Pages 33 and 34.

Not RoHS Compliant

See Note

See Note

Dimen sions: Millimeter s (Inche s)

Note: Coating clean .784/.031 min.above seating plane

Styles SL15, SL20,SL30, SL40, SL50

Style SL21

Styles SL22, SL27

WMax.

WMax.

WMax.

Max.T

Max.T

Max.T

L.S.L.S.

L.S.

H Max.H Max.

H Max.

LL Min.LL Min.

LL Min.

LDNom.

LDNom.

LDNom.

1.52/.060Max.

RADIAL LEADSSkyCap®/SL Series

081816






Style SL15 SL20 SL21 SL22 SL27 SL30 SL40 SL50 “Insertable” SL07 SL29 SL59 N/A N/A SL65 SL75 N/A

Width(W)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.604(.260)

7.62(.300)

10.16(.400)

12.70(.500)

Height(H)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.35(.250)

7.62(.300)

10.16(.400)

12.70(.500)

Thickness(T)

2.54(.100)

3.175(.125)

3.175(.125)

3.175(.125)

4.06(.160)

3.81(.150)

3.81(.150)

5.08(.200)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)

6.35(.250)

7.62(.300)

5.08(.200)

5.08(.200)

10.16(.400)


.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.635(.025)

Cap. in.* pF


WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 200 100 50 200 100 50 200 100 50 100 50 100 50 100 50

1.0-9.9 SL151A1R0DAB10 SL151A100KAB15 SI-----A150KAB22 SL-----A220KAB33 SL-----A330KAB39 SL-----A390KAB47 SL-----A470KAB68 SL-----A680KAB

100 SL151A101KAB150 SI-----A151KAB220 SI-----A221KAB330 SI-----A331KAB390 SI-----A391KAB470 SI-----A471KAB680 SI-----A681KAB

1000 SL211A102KAB1500 SI-----A152KAB2200 SI-----A222KAB3900 SI-----A392KAB4700 SI-----A472KAB

6800 SI-----A682KAB8200 SI-----A822KAB

10,000 SL305A103KAB15,000 SI-----A153KAB22,000 SI-----A223KAB33,000 SI-----A333KAB39,000 SI-----A393KAB47,000 SI-----A473KAB68,000 SI-----A683KAB

100,000 SI-----A104KABFor other styles, voltages, tolerances and lead lengths see Part No. Codes or contact factory.


= Industry preferred values= SL20 only

NOTE: Capacitance ranges available for SL12 same as SL15 SL62 same as SL21 SL64 same as SL30 SL89 same as SL21


081816





Style SL15 SL20 SL21 SL22 SL27 SL30 SL40 SL50

“Insertable” SL07 SL29 SL59 N/A N/A SL65 SL75 N/A

Width(W)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.604(.260)

7.62(.300)

10.16(.400)

12.70(.500)

Height(H)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.35(.250)

7.62(.300)

10.16(.400)

12.70(.500)

Thickness(T)

2.54(.100)

3.175(.125)

3.175(.125)

3.175(.125)

4.06(.160)

3.81(.150)

3.81(.150)

5.08(.200)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)

6.35(.250)

7.62(.300)

5.08(.200)

5.08(.200)

10.16(.400)


.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.635(.025)

Cap. in.* pF


WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 200 100 50 200 100 200 100 200 100 50 200 100 50 200 100 50

470 SL-----C471KAB1000 SL155C102KAB1500 SL-----C152KAB2200 SL-----C222KAB3300 SL-----C332KAB4700 SL-----C472KAB6800 SL-----C682KAB

10,000 SL215C103KAB15,000 SL-----C153KAB22,000 SL-----C223KAB33,000 SL-----C333KAB47,000 SL-----C473KAB68,000 SL-----C683KAB

100,000 SL215C104KAB150,000 SL-----C154KAB220,000 SL215C224KAB330,000 SL-----C334KAB390,000 SL-----C394KAB470,000 SL305C474KAB

1.0 uF SL305C105KAB2.2 uF SL405C225KAB2.7 uF SL505C275KAB4.7 uF SL505C475KAB

10.0 uF SL655C106KAB



= Industry preferred values= Extended range= Extended range with 0.150” thickness maximum


081816





500 VOLT SKYCAPS**

STYLE*MAXIMUM CAPACITANCE VALUE

C0G (NP0) X7RSL29 900 pF .015 μFSL20 1800 pF .033 μFSL28SL59

900 pF .015 μF

SL13 SL21

1800 pF .033 μF

SL30 SL61 SL65

7200 pF .12 μF

SL40 SL75

.015 μF .27 μF

SL22 1800 pF .033 μFSL27 1800 pF .033 μFSL76 .015 μF .27 μFSL50 .036 μF .59 μF

*Consult pages 27 and 28 for style sizes.

**Voltage rating based on DWV of 150% of rated voltage.


Style SL15 SL20 SL21 SL22 SL27 SL30 SL40 SL50

“Insertable” SL07 SL29 SL59 N/A N/A SL65 SL75 N/A

Width(W)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.604(.260)

7.62(.300)

10.16(.400)

12.70(.500)

Height(H)

3.81(.150)

5.08(.200)

5.08(.200)

5.08(.200)

6.35(.250)

7.62(.300)

10.16(.400)

12.70(.500)

Thickness(T)

2.54(.100)

3.175(.125)

3.175(.125)

3.175(.125)

4.06(.160)

3.81(.150)

3.81(.150)

5.08(.200)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)

6.35(.250)

7.62(.300)

5.08(.200)

5.08(.200)

10.16(.400)


.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

.635(.025)

Cap. in.* pF


WVDC WVDC WVDC WVDC WVDC WVDC WVDC WVDC100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50

10,000 SL155E103ZAB47,000 SI-----E473ZAB

100,000 SL215E104ZAB150,000 SL-----E154ZAB220,000 SL215E224ZAB330,000 SL215E334ZAB470,000 SL215E474ZAB680,000 SL-----E684ZAB

1.0 μF SL-----105ZAB1.5 μF SL30E155ZAB2.2 μF SL30E225ZAB3.3 μF SL30E335ZAB4.7 μF SL30E475ZAB



= Industry preferred values= SL20 only

RADIAL LEADSZ5U Dielectric

081816




GENERAL INFORMATIONAR Series


Temperature Coefficients: C0G (NP0), X7R, X8R

3000, 2000, 1000, 200, 100, 50 Volts


Lead Material: RoHS Compliant, 100% Tin

Qualified: to AEC-Q200, PPAP Available

Temperature Range: up to 150ºC

HOW TO ORDER

Drawings are for illustrative purposes only.Actual lead form shape could vary within stated tolerances based on body size.

AR21 1045 F 4 R TR1M

Style CapacitanceFirst two digits are thesignificant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10pF use “R” in place of decimal point, e.g., 1R4 = 1.4pF.)


TemperatureCoefficientA = C0G (NP0)C = X7RF = X8RL = X8L

Failure Rate4 = AEC-Q200

LeadsR = RoHS





Voltage5 = 50V1 = 100V2 = 200VA = 1000VG = 2000VH = 3000V

C0G (NP0): C = ±.25pF D = ±.5pF F = ±1%

(>50pF only) G = ±2%

(>25pF only) J = ±5% K = ±10%

X7R: J = ±5% K = ±10% M = ±20%

X8R: J = ±5% K = ±10% M = ±20%



3 Digit Date Code

Lot Code

AVX Logo

Quantity per BagAR15, 20, 21, 30 1000 Pieces

AR40 500 Pieces

Note: AR15, AR20, AR21, AR30, and AR40 available on tape and reel per EIA specifications RS-468. See pages 33 and 34.

L.S.

RADIAL LEADSSkyCap®/AR Series – Automotive

022520





Notes:“Insertable” make reference to alternative KYOCERA AVX style using the same range of capacitance available on the matrix.For others Styles, voltages, tolerance and lead lengths see Skycap catalog or contact factory.Others capacitance values available upon special request.Others styles available: AR12, AR14, AR62, AR89.


Style AR15 AR20 AR21

“Insertable” AR07 AR29 AR59Width

(W)3.81

(.150)5.08

(.200)5.08

(.200)Height

(H)3.81

(.150)5.08

(.200)5.08

(.200)Thickness

(T)2.54

(.100)3.175(.125)

3.175(.125)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)


.508(.020)

.508(.020)

.508(.020)

Cap. in. pF


WVDC WVDC WVDC200 100 50 200 100 50 200 100 50

1 AR-----A1R0D4R10 AR-----A100K4R15 AR-----A150K4R22 AR-----A220K4R33 AR-----A330K4R39 AR-----A390K4R47 AR-----A470K4R68 AR-----A680K4R

100 AR-----A101K4R150 AR-----A151K4R220 AR-----A221K4R330 AR-----A331K4R390 AR-----A391K4R470 AR-----A471K4R680 AR-----A681K4R

1,000 AR-----A102K4R1,500 AR-----A152K4R2,200 AR-----A222K4R3,900 AR-----A392K4R4,700 AR-----A472K4R6800 AR-----A682K4R8200 AR-----A822K4R


022520





Notes:“Insertable” make reference to alternative KYOCERA AVX style using the same range of capacitance available on the matrix.For others Styles, voltages, tolerance and lead lengths see Skycap catalog or contact factory.Others capacitance values available upon special request.Others styles available: AR12, AR14, AR62, AR89, AR32, AR38.


Style AR15 AR20 AR21 AR30 AR40 “Insertable” AR07 AR29 AR59 AR65 AR75

Width(W)

3.81(.150)

5.08(.200)

5.08(.200)

7.62(.300)

10.16(.400)

Height(H)

3.81(.150)

5.08(.200)

5.08(.200)

7.62(.300)

10.16(.400)

Thickness(T)

2.54(.100)

3.175(.125)

3.175(.125)

3.81(.150)

3.81(.150)

Lead Spacing (L.S.)

2.54(.100)

2.54(.100)

5.08(.200)

5.08(.200)

5.08(.200)


.508(.020)

.508(.020)

.508(.020)

.508(.020)

.508(.020)

Cap. in. pF


WVDC WVDC WVDC WVDC WVDC100 50 100 50 100 50 100 50 100 50

470 AR-----C471K4R1000 AR-----C102K4R1500 AR-----C152K4R2200 AR-----C222K4R3300 AR-----C332K4R4700 AR-----C472K4R6800 AR-----C682K4R

10,000 AR-----C103K4R15,000 AR-----C153K4R22,000 AR-----C223K4R33,000 AR-----C333K4R47,000 AR-----C473K4R68,000 AR-----C683K4R

100,000 AR-----C104K4R150,000 AR-----C154K4R220,000 AR-----C224K4R330,000 AR-----C334K4R390,000 AR-----C394K4R470,000 AR-----C474K4R680,000 AR-----C684K4R1.0 uF AR-----C105K4R

4,700,000 AR-----C475K4R6,800,000 AR-----C685K4R

10.0 uF AR-----C106K4R

= Extended range with 0.150” thickness maximum


022520




GENERAL INFORMATIONAR Series


Temperature Coefficients: C0G (NP0), X7R, X8R

200, 100, 50 Volts


Lead Material: Solderable

Qualified: to AEC-Q200

Temperature Range: up to 150ºC


AR21 1045 F 4 R TR1M

Style CapacitanceFirst two digits are thesignificant figures ofcapacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104. (For values below 10pF use “R” in place of decimal point, e.g., 1R4 = 1.4pF.)


X8R:J = ±5%

K = ±10%M = ±20%

TemperatureCoefficientF = X8R

Failure Rate4 = AEC-Q200

LeadsR = RoHS





Voltage5 = 50V1 = 100V2 = 200V



3 Digit Date Code

Lot Code

AVX Logo

Quantity per Bag

AR15, 20, 21, 30 1000 Pieces

AR40 500 PiecesNote: AR15, AR20, AR21, AR30, and AR40 available on tape and reel per EIA

specifications RS-468. See pages 33 and 34.

RADIAL LEADSX8R Dielectric “F”

022520





Notes:“Insertable” make reference to alternative KYOCERA AVX style using the same range of capacitance available on the matrix.For others Styles, voltages, tolerance and lead lengths see Skycap catalog or contact factory.Others capacitance values available upon special request.Others styles available: AR14, AR62, AR89.


Style AR20 AR21

“Insertable” AR29 AR59Width

(W)5.08

(.200)5.08

(.200)Height

(H)5.08

(.200)5.08

(.200)Thickness

(T)3.175(.125)

3.175(.125)

Lead Spacing (L.S.)

2.54(.100)

5.08(.200)


.508(.020)

.508(.020)

Cap. in. pF


WVDC WVDC200 100 50 200 100 50

1,000 AR-----F102K4R10,000 AR-----F103K4R

100,000 AR-----F104K4R330,000 AR-----F334K4R


022520




STYLES AND CAPACITANCE SPECIFICATIONS

RADIAL LEADSX8L Dielectric

EIA Chacteristics

Style AR15 AR20 AR21

“Insertable” AR07 AR29 AR59

Cap. in pF Industry Preferred Values

WVDC WVDC WVDC100 50 100 50 100 50

470 AR_____L471K4R1,000 AR_____L102K4R1,500 AR_____L152K4R2,200 AR_____L222K4R3,300 AR_____L332K4R4,700 AR_____L472K4R6,800 AR_____L682K4R

10,000 AR_____L103K4R15,000 AR_____L153K4R22,000 AR_____L223K4R33,000 AR_____L333K4R47,000 AR_____L473K4R68,000 AR_____L683K4R

100,000 AR_____L104K4R150,000 AR_____L154K4R220,000 AR_____L224K4R330,000 AR_____L334K4R390,000 AR_____L394K4R470,000 AR_____L474K4R680,000 AR_____L684K4R

1.0 uF AR_____L105K4R4700,000 AR_____L475K4R6800,000 AR_____L685K4R

10.0 uF AR_____L106K4R

022520





For others Styles, voltages, tolerance and lead lengths see Skycap catalog or contact factory.


Style AR20 AR21 AR22 AR27 AR30 “Insertable” AR29 AR59 N/A N/A AR65

Cap. in. pF


WVDC 1000

WVDC 1000

WVDC 1000

WVDC 1000

WVDC2000 3000

470 AR_____C471K4R1000 AR_____C102K4R1500 AR_____C152K4R2200 AR_____C222K4R3300 AR_____C332K4R4700 AR_____C472K4R6800 AR_____C682K4R

10,000 AR_____C103K4R15,000 AR_____C153K4R22,000 AR_____C223K4R47,000 AR_____C473K4R68,000 AR_____C683K4R

RADIAL LEADSHigh Voltage Automotive Product SkyCap Capacitors - X7R Dielectric

022520




LEAD SPACING .100 ±.030 Dimensions: Inches (Millimeters)

AR07/SR07*(T=.100)

AR14/SR14(T=.100)

AR15/SR15*(T=.100)

AR20/SR20*(T=.125)


AR12/SR12*(T=.100)

SR13*(T=.125)

AR21/SR21*(T=.125)

SR21-85*(T=.125)

SR28*(T=.125)

AR30/SR30*(T=.150)

SR30-LP*(T=.150)

AR32/SR32*(T=.150)

AR40/SR40*(T=.150)

AR59/SR59*(T=.125)

SR61(T=.150)

SR63*(T=.150)

SR64*(T=.150)

SR64-LP*(T=.150)

AR65/SR65*(T=.150)

Leads = #22 AWG Leads = #22 AWG

AR29/SR29*(T=.125)

AR62/SR62*(T=.125)

SR62-LP*(T=.100)

Leads = #22 AWG Leads = #22 AWG

*SL style available in all SR configurations.

RADIAL LEADSSkyCap® Configurations by Lead Spacing

111319




LEAD SPACING .200 ±.030 continued Dimensions: Inches (Millimeters)

SR65-LP*(T=.150)

SR67(T=.125)

AR75/SR75*(T=.150)

Leads = #22 AWG

AR89/SR89*(T=.125)

Leads = #22 AWG

Leads = #22 AWG


SR16(T=.125)

AR22/SR22(T=.125)

SR33(T=.150)

LEAD SPACING .300 ±.030

SR27(T=.150)

SR34(T=.150)


SR50*(T=.200)

SR76*(T=.175)

Leads = #22 AWG


AR38/SR38*(T=.150)

NOTES: 1. All leads are #24 AWG unless otherwise noted. 2. Available in tape and reel packaging(*). 3. Other styles are also available, contact factory. 4. (T = XXX) under type designation is maximum thickness in inches.

*SL style available in all SR configurations.Drawings are for illustrative purposes only.

Actual lead form shape could vary within stated tolerances based on body size.

RADIAL LEADSSkyCap® Configurations by Lead Spacing

111319




GENERAL INFORMATIONMR Series

Molded Radial Leaded MLC

Temperature Coefficients: C0G (NP0), X7R, Z5U 50, 100, 200 Volts

Case Material: Molded Epoxy


HOW TO ORDER

MR05 5611 A A RJ

StyleMR04MR05MR06MR07MR08



DielectricA = C0G (NP0)C = X7RE = Z5U


T = CECC

LeadsA = Standard

Solderable (SnPb)T1 = Trimmed Leads

.230” ± .030”

Voltage5 = 50V1 = 100V2 = 200V

C0G (NP0): D = ±.5pF

(>10pF only) F = ±1%

(>50pF only) G = ±2%

(>25pF only) J = ±5% K = ±10%

X7R: J = ±5% K = ±10% M = ±20%

Z5U: M = ±20% Z = +80%

-20% Not RoHS Compliant

1 Trimmed lead length for the MR05 style will be measured from the bend in the lead (seating plane).

MARKINGMarking is as size permits.(For code identification, see HOW TO ORDER section.)

— KYOCERA AVX— Capacitance Tolerance— Voltage Rating— Temperature Coefficient— Date Code— Lot Code

PACKAGING REQUIREMENTSBulk Packaging: 1000 pcs. per sealed package

except MR07/MR08 (300 pcs.).Tape and Reel: Available on MR04, MR05, and MR06

only (2500 pcs./reel).Ammo Packaging: Available on special request.

RADIAL LEADSCeralam®

111319





Dimensions: Millimeters (Inches)

Style MR04 MR05 MR06 MR07 MR08Length 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")

Width 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")Thickness 2.28 (.090") 2.28 (.090") 2.28 (.090") 3.55 (.140") 6.09 (.240")

Lead Spacing 2.54 (.100") 5.08 (.200") 5.08 (.200") 10.16 (.400") 10.16 (.400")

Lead Diameter .635 (.025") .635 (.025") .635 (.025") .635 (.025") .635 (.025")

Cap.in. pF

Typical Part Nos.

WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 200 100 50 200 100 50 200 100 50

1.0 MR-----5A1R0DAAto

9.1 MR-----5A9R1DAA10 MR-----5A100KAA12 MR-----5A120KAA15 MR-----5A150KAA18 MR-----5A180KAA22 MR-----5A220KAA27 MR-----5A270KAA33 MR-----5A330KAA39 MR-----5A390KAA47 MR-----5A470KAA56 MR-----5A560KAA68 MR-----5A680KAA82 MR-----5A820KAA

100 MR-----5A101KAA120 MR-----5A121KAA150 MR-----5A151KAA180 MR-----5A181KAA220 MR-----5A221KAA270 MR-----5A271KAA330 MR-----5A331KAA390 MR-----5A391KAA470 MR-----5A471KAA560 MR-----5A561KAA680 MR-----5A681KAA820 MR-----5A821KAA

1000 MR-----5A102KAA1200 MR-----5A122KAA1500 MR-----5A152KAA1800 MR-----5A182KAA2200 MR-----5A222KAA2700 MR-----5A272KAA3300 MR-----5A332KAA3900 MR-----5A392KAA4700 MR-----5A472KAA5600 MR-----5A562KAA6800 MR-----5A682KAA8200 MR-----5A822KAA

10,000 MR-----5A103KAA12,000 MR-----5A123KAA15,000 MR-----5A153KAA18,000 MR-----5A183KAA22,000 MR-----5A223KAA27,000 MR-----5A273KAA33,000 MR-----5A333KAA39,000 MR-----5A393KAA47,000 MR-----5A473KAA56,000 MR-----5A563KAA68,000 MR-----5A683KAA82,000 MR-----5A823KAA

100,000 MR-----5A104KAA120,000 MR-----5A124KAA150,000 MR-----5A154KAA

For trimmed leads see “How To Order”.For other tolerances see “How To Order”.For other voltages see “How To Order”.

*Length, width and thickness dimensions are ±.254 mm (±.010”). Lead diameter is ±.05 mm (±.002”). Lead spacing is ±.381 mm (±.015”).

= Industry preferred values

RADIAL LEADSCeralam® - C0G (NP0)

111319






Style MR04 MR05 MR06 MR07 MR08Length 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")

Width 4.83 (.190") 4.83 (.190") 7.36 (.290") 12.44 (.490") 12.44 (.490")Thickness 2.28 (.090") 2.28 (.090") 2.28 (.090") 3.55 (.140") 6.09 (.240")

Lead Spacing 2.54 (.100") 5.08 (.200") 5.08 (.200") 10.16 (.400") 10.16 (.400")

Lead Diameter .635 (.025") .635 (.025") .635 (.025") .635 (.025") .635 (.025")

Cap. in. pF

Typical Part Nos.

WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 200 100 50 200 100 50 200 100 50

100 MR-----5C101KAA120 MR-----5C121KAA150 MR-----5C151KAA180 MR-----5C181KAA220 MR-----5C221KAA270 MR-----5C271KAA330 MR-----5C331KAA390 MR-----5C391KAA470 MR-----5C471KAA560 MR-----5C561KAA680 MR-----5C681KAA820 MR-----5C821KAA

1000 MR-----5C102KAA1200 MR-----5C122KAA1500 MR-----5C152KAA1800 MR-----5C182KAA2200 MR-----5C222KAA2700 MR-----5C272KAA3300 MR-----5C332KAA3900 MR-----5C392KAA4700 MR-----5C472KAA5600 MR-----5C562KAA6800 MR-----5C682KAA8200 MR-----5C822KAA

10,000 MR-----5C103KAA12,000 MR-----5C123KAA15,000 MR-----5C153KAA18,000 MR-----5C183KAA22,000 MR-----5C223KAA27,000 MR-----5C273KAA33,000 MR-----5C333KAA39,000 MR-----5C393KAA47,000 MR-----5C473KAA56,000 MR-----5C563KAA68,000 MR-----5C683KAA82,000 MR-----5C823KAA

100,000 MR-----5C104KAA120,000 MR-----5C124KAA150,000 MR-----5C154KAA180,000 MR-----5C184KAA220,000 MR-----5C224KAA270,000 MR-----5C274KAA330,000 MR-----5C334KAA390,000 MR-----5C394KAA470,000 MR-----5C474KAA560,000 MR-----5C564KAA680,000 MR-----5C684KAA820,000 MR-----5C824KAA

1.0 μF MR-----5C105KAA1.2 pF MR-----5C125KAA1.5 pF MR-----5C155KAA1.8 pF MR-----5C185KAA2.0 pF MR-----5C205KAA2.2 pF MR-----5C225KAA2.7 pF MR-----5C275KAA3.3 pF MR-----5C335KAA3.9 pF MR-----5C395KAA4.7 μF MR-----5C475KAA


*Length, width and thickness dimensions are ±.254 mm (±.010”). Lead diameter is ±.05 mm (±.002”). Lead spacing is ±.381 mm (±.015”).


RADIAL LEADSCeralam® - X7R

111319






Style MR04 MR05 MR06 MR07 MR08

Length* 4.83(.190")

4.83(.190")

7.36(.290")

12.44(.490")

12.44(.490")

Width* 4.83(.190")

4.83(.190")

7.36(.290")

12.44(.490")

12.44(.490")

Thickness* 2.28(.090")

2.28(.090")

2.28(.090")

3.55(.140")

6.09(.240")

Lead* Spacing

2.54(.100")

5.08(.200")

5.08(.200")

10.16(.400")

10.16(.400")

Lead* Diameter

.635(.025")

.635(.025")

.635(.025")

.635(.025")

.635(.025")

Cap. in. pF

Typical Part Nos.

WVDC WVDC WVDC WVDC WVDC100 50 100 50 100 50 100 50 100 50

10,000 MR-----5E103ZAA12,000 MR-----5F1237AA15,000 MR-----5F1537AA18,000 MR-----5F1837AA22,000 MR-----5F2237AA27,000 MR-----5F2737AA33,000 MR-----5F3337AA39,000 MR-----5F3937AA47,000 MR-----5F4737AA56,000 MR-----5F5637AA68,000 MR-----5F6837AA82,000 MR-----5F8237AA

100,000 MR-----5E104ZAA120,000 MR-----5F1247AA150,000 MR-----5F1547AA180,000 MR-----5F1847AA220,000 MR-----5F2247AA270,000 MR-----5F2747AA330,000 MR-----5F3347AA390,000 MR-----5F3947AA470,000 MR-----5E474ZAA560,000 MR-----5F5647AA680,000 MR-----5F6847AA820,000 MR-----5F8247AA

1.0 μF MR-----5E105ZAA1.2 μF MR-----5F1257AA1.5 μF MR-----5F1557AA1.8 μF MR-----5F1857AA2.2 μF MR-----5F2257AA2.7 μF MR-----5F2757AA3.3 μF MR-----5F3357AA3.9 μF MR-----5F3957AA4.7 μF MR-----5E475ZAA5.6 μF MR-----5F5657AA6.8 μF MR-----5F6857AA8.2 μF MR-----5F8257AA

10.0 μF MR-----5E106ZAA


*Length, width and thickness dimensions are ±.254 mm (±.010”). Lead diameter is ±.05 mm (±.002”). Lead spacing is ±.381 mm (±.015).


RADIAL LEADSCeralam® - Z5U

111319




GENERAL INFORMATION1. Standard reel diameter is 355 millimeters (14 inches) maximum.

2. Reeling standard (#1 or #2) should be specified when ordering.

HOW TO ORDERTo specify tape and reel packaging, add TR1, TR2 or TRX to the end of the KYOCERA AVX 12 digit part number.

Examples:

SR215C104KARTR1SR305E105MARTR2SR215C103JARTRX

THE INSERTABLES

32 mm max.

16 0.5 mm

SR07 SR29 SR59 SR65 SR75

32 mm max.

19 mm min. tobase of unit

SR07 SR29 SR59 SR65 SR75

STANDARD 2

STANDARD 1

32 max.

16±.5

SR29 SR28 SR12 SR21 SR13 SR32 MR05

32 max.

16 min.

SR15 MR06 SR30 SR40

20 +1.5 -1.0

SR21 SR32 SR63(TRX) (TRX) (TRX) SR20

Dimensions in Millimeters

32 max.

19 min.

SR29 SR28 SR12 SR21 SR13 SR32 MR05

32 max.

19 min.

SR15 MR06 SR30 SR40SR20

Dimensions in Millimeters

STANDARD 1

STANDARD 2

T

KE

D

BA

L

Q

CW

R

F

S

S

O N M X

DESCRIPTION DIMENSIONS (MM)A. Feed Hole Pitch 12.70 ± .20B. Feed Hole Diameter 3.99 ± .20C. Feed Hole Location 9.02 ± .51

D. Component Lead Spacing 5.00+.79-.20 or 2.54 +.79

-.20E. Component Lead LocationF. Component Lead Protrusion (The lead wire could

end in the edge of carrier tape or before of it, inclusive under adhesive tape)

3.81 ±.51 or 5.00 ±.51 for 2.54 lead spacing

2.00 maximumK. Component Body Location 6.35 ±.41

L. Carrier Tape Width 18.01 +1.02-.51

M. Carrier Tape Assembly Thickness .71 ± .20N. Carrier Tape Spliced Thickness 1.42 maximumO. Carrier Tape Spliced Length 50.80 - 88.90Q. Adhesive Tape Border 3.00 maximum

R. Component Bent Leads (either direction) .79 maximum .99 maximum

S. Component Misalignment 12.70 ±.99T. Component Pitch 5.00 minimumW. Adhesive Tape Width .51 ±.10X. Carrier Tape Thickness 254 ±2.00Y. Cumulative Pitch over 20 Pitches

RADIAL LEADSPackaging - Tape and Reel

041720




REEL DIRECTION QUANTITY PER REEL SR/AR

PART PCS

SR15, 07, 12 3500

SR20, 21, 23, 2813, 29, 59, 62, 89

3000

SR30, 32, 40, 63, 6465, 75

2000

MR05, 06 2500

*SL style available in all SR configurations.

DESCRIPTION DIMENSIONS (MM)

A - Reel Diameter 304.80 - 355

B - Reel Outside Width 50.80 maximum

C - Reel Inside Width 38.10 - 46.02

D - Core Diameter (O.D.) 102.01 maximum

E - Hub Recess Diameter 86.36 maximum

F - Hub Recess Depth 9.50 minimum

G - Arbor Hole Diameter 25.40 - 30.48

CONVERSION TABLE

MM IN MM IN MM IN MM IN MM IN.10 .004 1.52 .060 5.00 .197 9.91 .390 32.00 1.260.20 .007 2.00 .079 5.08 .200 10.03 .395 38.10 1.500.38 .015 2.54 .100 6.22 .245 10.16 .400 46.02 1.812.41 .016 3.00 .118 6.35 .250 11.68 .460 50.80 2.000.51 .020 3.18 .125 6.60 .260 12.50 .492 86.36 3.400.71 .028 3.48 .137 6.99 .275 12.70 .500 88.90 3.500.79 .031 3.81 .150 7.62 .300 16.00 .630 102.01 4.016.99 .039 3.99 .157 8.89 .350 18.01 .709 254.00 10.000

1.02 .040 4.45 .175 9.02 .355 25.40 1.000 304.80 12.0001.42 .056 4.98 .196 9.50 .374 30.48 1.200 355.00 14.000

RADIAL LEADSPackaging

111319




GENERAL INFORMATIONMD SeriesTemperature Coefficients: C0G (NP0), X7R, Z5U, 50, 100 VoltsFor established reliability DIPGuards see MIL-PRF-39014 section on pages 60 to 65.

HOW TO ORDER

MD01 1045 E A BM

StyleMD01CKR22*CKS22**MD02CKR23*CKS23*MD03CKR24*CKS24**

CapacitanceFirst two digits are the significant figures of capacitance. Third digit indicates the additional number of zeros. For example, order 100,000 pF as 104.


Temperature CoefficientA = C0G (NP0)C = X7RE = Z5U


Assembly Method

A = Hand Assembled

B = Automated Assembly

Voltage5 = 50V1 = 100V C0G (NP0):

F = ±1% J = ±5% K = ±10%

X7R: J = ±5% K = ±10% M = ±20%

Not RoHS Compliant

MARKINGPACKAGING REQUIREMENTS

Z5U: M = ±20% Z = +80%

-20%

* Reference pages 58 to 63.** Reference page 79.

Standard Packaging: MD01/MD02: 200 pieces per slide pack. MD03: 200 pieces per vial.Part Number Example

MD015 E 104MAB Top of Unit: A 5 E 104 M

VoltageY, 1, or 5

3 Digit CodeFor Capacitance

Dielectric A = C0G (NP0) C = X7R E = Z5U

ToleranceCodeAVX

Slide Package Dimensions

MD01 MD02 MD03*(HO) Overall Height .400 ref. .430 ref. .545 ref.(HC) Channel Height .141 ± .006 .171 ± .006 .295 ± .010(HI) Inside Height .350 .380 .495(WO) Overall Width .540 ref. .540 ref. .600 ref.(WI) Inside Width .490 .490 .550(WC) Channel Width .210 .210 .170(WT) Top Width .350 .310 .300(L) Length 20.073 ± .06 20.073 ± .06 20.073 ± .06*Optional

L

SEENOTE 1

SEENOTE 2

.012.004

.325.035

.400 max.

TMAX.

MAX.H

MAX.H

.015.148.028

MIN.

.019 .004.0575 .0125

1 2

Note 1 = Leads centered within .010"Note 2 = Angle shall be 95, +10, -5

.019 .004

.010 MAX.

60 TYP.20

TWO PIN DIPDIPGuard®

111319




SIZE SPECIFICATIONS

CAPACITANCE SPECIFICATIONS

MILITARY CROSS REFERENCE GUIDENote: For CKR22/23/24, see MIL-PRF-39014 section in the Military Section pages 58 thru 63.

For CKS22/23/24 see MIL-PRF-123 section in the Military Section page 79.

Style Length (L) Height (H1) Height (H2) Thickness

MD01 6.60(.260 ± .020)

3.43(.135 max.)

4.45(.175 max.)

2.54(.098 max.)

MD02 6.60(.260 ± .020)

4.19(.162 max.)

5.08(.195 max.)

2.54(.098 max.)

MD03 6.60(.260 ± .020)

7.37(.290 max.)

8.13(.320 max.)

2.54(.098 max.)



Style MIL-PRF-39014 MIL-PRF-123 Length (L) Height (H1) Height (H2) Thickness

MD01 CKR22 CKS22 6.60(.260 ± .020)

3.43(.135 max.)

4.45(.175 max.)

2.54(.092 ± .006)

MD02 CKR23 CKS23 6.60(.260 ± .020)

4.19(.162 max.)

5.08(.195 max.)

2.54(.092 ± .006)

MD03 CKR24 CKS24 6.60(.260 ± .020)

7.37(.290 max.)

8.13(.320 max.)

2.54(.092 ± .006)

EIACharacteristic C0G (NP0)

Style MD01Cap.

in. pF .WVDC

100 5010 MD015A100KAB15 MD015A150KAB22 MD015A220KAB33 MD015A330KAB47 MD015A470KAB68 MD015A680KAB

100 MD015A101KAB150 MD015A151KAB220 MD015A221KAB330 MD015A331KAB470 MD015A471KAB680 MD015A681KAB

1000 MD015A102KAB1500 MD015A152KAB2200 MD015A222KAB3300 MD015A332KAB

Style MD02Cap.

in. pFWVDC

100 504700 MD025A472KAB6800 MD025A682KAB

10000 MD025A103KAB

EIACharacteristic X7R

Style MD01Cap.

in. pF .WVDC

100 50220 MD015C221KAB330 MD015C331KAB470 MD015C471KAB680 MD015C681KAB

1000 MD015C102KAB1500 MD015C152KAB2200 MD015C222KAB3300 MD015C332KAB4700 MD015C472KAB6800 MD015C682KAB

10,000 MD011C103KAB15,000 MD015C153KAB22,000 MD015C223KAB33,000 MD015C333KAB47,000 MD015C473KAB68,000 MD015C683KAB

100,000 MD015C104KABStyle MD02

Cap. in. pF

WVDC100 50

150,000 MD025C154KAB220,000 MD025C224KAB

Style MD03Cap.

in. pFWVDC

100 50330,000 MD035C334KAA470,000 MD035C474KAA680,000 MD035C684KAA

1,000,000 MD035C105KAA1,500,000 MD035C155KAA2,000,000 MD035C205KAA

EIACharacteristic X5U

Style MD01Cap.

in. pF .WVDC

100 5010,000 MD015E103ZAB15,000 MD015E153ZAB22,000 MD015E223ZAB33,000 MD015E333ZAB47,000 MD015E473ZAB68,000 MD015E683ZAB

100,000 MD015E104ZAB150,000 MD015E154ZAB220,000 MD015E224ZAB330,000 MD015E334ZAB

Style MD02Cap.

in. pFWVDC

100 50470,000 MD025E474ZAB

Style MD03Cap.

in. pFWVDC

100 50680,000 MD035E684ZAA

1,000,000 MD035E105ZAA

C0G (NP0) X7R Z5U

For other voltages and tolerances see Part No. Codes.

For other voltages and tolerances see Part No. Codes.

For other voltages and tolerances see Part No. Codes.*Other capacitance values available upon special request.


TWO PIN DIPDIPGuard®

111319




GENERAL INFORMATIONSA SeriesConformally Coated Axial Leaded MLCTemperature Coefficients: C0G (NP0), X7R, X5R, Z5U 10, 50, 100, 200 Volts

Case Material: Epoxy (Flame Retardant to UL Bulletin 492, Par. 280)


HOW TO ORDER

SA10 1045 E A RZ

ConformalAxial Size

SA05SA10SA11SA20SA30SA40



DielectricA = C0G (NP0)C = X7RD = X5RE = Z5U


LeadsStandard (Solderable)R = RoHS CompliantA = Standard

Solderable(Also RoHS Compliant)

VoltageZ = 10V5 = 50V1 = 100V2 = 200V

C0G (NP0): C = ±.25pF D = ±.5pF F = ±1% G = ±2% J = ±5% K = ±10%

X7R: J = ±5% K = ±10% M = ±20%

X5R: K = ±10% M = ±20%

Z5U: M = ±20% Z = +80%

-20%MARKING (EXAMPLE)SpinGuard marking includes full date code/lot code identification. A first in the industry, this format provides complete traceability to all manufacturing processes involving the basic chip and final assembly. Total Shipment traceability is also provided.

Please select correct termination style.

PACKAGING REQUIREMENTSA = Standard Reels (see Page 49)B = 1000 piece reels (distributors only, tight tolerance only)C = Ammo Pack (see Page 49)D thru J = See Special Lead Configurations (Page 41)M = 26mm tape and reelN = 26mm ammo packR = RoHS, Standard reels (See page 49)

A 5 E

1 0 4

Z A B

8 1 0

VOLTAGE(5 = 50V) TC

(E = Z5U)AVX

TOLERANCE(Z = +80, -20%)

YEAR (2008) WEEK (10th)

CAP CODEAND MULTIPLIER

ALPHA-ALPHA,LOT CODEAB=LOT #2 IN WEEK

SA105E104ZAALOT CODE/DATE CODE

=810AB

SA10, 11, 20, 30, 40

A Z

1 0 4

8 A B

AVXTOLERANCE

(Z = +80%, -20%)

YEAR (2008)


LOT CODE

SA055E104ZAALOT CODE/DATE CODE

=8AB

SA05

2.30 (.090")Max.

3.00 (.118")Max.

25.4 (1.00")Min.

.445 ± .0127(.0175" ± .0005")

Dimensions: Millimeters(Inches)

AXIAL LEADSSpinGuard®/SA Series

111319






Style SA05 SA10 SA11 SA20 SA30 SA40Length

(L)3.00

(.118")4.32

(.170")4.32

(.170")6.60

(.260")7.37

(.290")10.16(.400")

Diameter(D)

2.30(.090")

2.54(.100")

3.05(.120")

2.54(.100")

3.81(.150")

3.81(.150")

Lead Diameter .445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

Lead Length 25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.

WVDC WVDC WVDC WVDC WVDC WVDC100 50 200 100 50 100 50 100 50 100 50 100 50

1.0* SA102A1R0DAR

9.1* SA102A9R1DAR10 SA102A100JAR12 SA102A120JAR15 SA102A150JAR18 SA102A180JAR22 SA102A220JAR27 SA102A270JAR33 SA102A330JAR39 SA102A390JAR47 SA102A470JAR56 SA102A560JAR68 SA102A680JAR82 SA102A820JAR

100 SA102A101JAR120 SA102A121JAR150 SA101A151JAR180 SA101A181JAR220 SA101A221JAR270 SA101A271JAR330 SA101A331JAR390 SA101A391JAR470 SA101A471JAR560 SA101A561JAR680 SA101A681JAR820 SA101A821JAR

1000 SA105A102JAR1200 SA201A122JAR1500 SA201A152JAR1800 SA205A182JAR2200 SA301A222JAR2700 SA301A272JAR3300 SA301A332JAR3900 SA301A392JAR4700 SA305A472JAR5600 SA401A562JAR6800 SA401A682JAR8200 SA405A822JAR

10,000 SA405A103JAR12,000 SA405A123JAR

For other tolerances see Part No. CodesFor other voltages see Part No. CodesKYOCERA AVX Style

*“C&D” Tolerance Only


AXIAL LEADSSpinGuard® - SA Series - C0G (NP0) Dielectric

111319







(L)3.00

(.118")4.32

(.170")4.32

(.170")6.60

(.260")7.37

(.290")10.16(.400")

Diameter(D)

2.30(.090")

2.54(.100")

3.05(.120")

2.54(.100")

3.81(.150")

3.81(.150")

Lead Diameter

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

Lead Length

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.

WVDC WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 100 50 100 50 100 50 100 50

220 SA102C221KAR270 SA102C271KAR330 SA102C331KAR390 SA102C391KAR470 SA102C471KAR560 SA101C561KAR680 SA101C681KAR820 SA101C821KAR

1000 SA101C102KAR1200 SA101C122KAR1500 SA101C152KAR1800 SA101C182KAR2200 SA101C222KAR2700 SA101C272KAR3300 SA101C332KAR3900 SA101C392KAR4700 SA101C472KAR5600 SA101C562KAR6800 SA101C682KAR8200 SA105C822KAR

10,000 SA105C103KAR12,000 SA105C123KAR15,000 SA105C153KAR18,000 SA105C183KAR22,000 SA105C223KAR27,000 SA105C273KAR33,000 SA105C333KAR39,000 SA105C393KAR47,000 SA105C473KAR56,000 SA115C563KAR68,000 SA115C683KAR82,000 SA115C823KAR

100,000 SA115C104KAR120,000 SA305C124KAR150,000 SA305C154KAR180,000 SA305C184KAR220,000 SA305C224KAR270,000 SA305C274KAR330,000 SA305C334KAR470,000 SA405C474KAR

1,000,000 SA305C105KAR

For other tolerances see Part No. CodesFor other voltages see Part No. CodesStyle


AXIAL LEADS/SpinGuard® - SA Series - X7R Dielectric

111319







(L)3.00

(.118")4.32

(.170")4.32

(.170")6.60

(.260")7.37

(.290")10.16(.400")

Diameter(D)

2.30(.090")

2.54(.100")

3.05(.120")

2.54(.100")

3.81(.150")

3.81(.150")

Lead Diameter

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

.445(.0175")

Lead Length

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.

WVDC WVDC WVDC WVDC WVDC WVDC50 100 50 100 50 100 50 100 50 100 50

10,000 SA105E103ZAR15,000 SA105E153ZAR22,000 SA105E223ZAR33,000 SA105E333ZAR47,000 SA105E473ZAR68,000 SA105E683ZAR

*100,000 SA105E104ZAR150,000 SA105E154ZAR220,000 SA105E224ZAR330,000 SA115E334ZAR470,000 SA305E474ZAR680,000 SA305E684ZAR820,000 SA305E824ZAR

1,000,000 SA305E105ZAR


*Preferred Industry Decoupling Capacitor — Insertable on .300” centers.

SA105E104ZAA


AXIAL LEADS/SPINGUARD®

SpinGuard® - SA Series - Z5U Dielectric

111319






Style SA10Length

(L)4.32

(.170")Diameter

(D)2.54

(.100")Lead

Diameter.445

(.0175")

Lead Length

25.4(1.00")

Cap. in. μF

Typical Part Nos.

WVDC10

1.8 SA10ZD185KAR2.7 SA10ZD275KAR3.3 SA10ZD335KAR4.7 SA10ZD475KAR



AXIAL LEADSSpinGuard® - SA Series - X7R Dielectric

111319




GENERAL INFORMATIONAA Series

Electrical Characteristics: AA101C103K4RCapacitance @ 25ºC, 1kHz, 1Vrms 0.0100μFCapacitance Tolerance ±10 %Dissipation Factor @ 25ºC 2.5% MaxRated Voltage 100VdcDielectric Withstand Voltage 250VdcInsulation Resistance @ 25ºC @ Rated Voltage 100000 MohmsTemperature Characteristics:X7R (-55 to + 125ºC ± 15% @ 0Vdc)Lead Material:RoHS Compliant 100% Tin

HOW TO ORDER

AA10 1031 C 4 R

Component SizeAA10 AA13

Capacitance Code

First two digits are the significant figures of

capacitance. Third digit indicates the additional

number of zeros. For example, order 100,000 pF as 104. (For values below 10pF use “R” in

place of decimal point, e.g., 1R4 = 1.4pF.)

K

CapacitanceTolerance

Code

DielectricA = C0G (NP0) C = X7R

Failure Rate4 = Automotive

RoHS Compliant

R = RoHS Compliant

Voltage RatingZ = 10V 5 = 50V

1 = 100V 2 = 200V

MARKING (EXAMPLE)SpinGuard marking includes full date code/lot code identification. A first in the industry, this format provides complete traceability to all manufacturing processes involving the basic chip and final assembly. Total Shipment traceability is also provided.

PACKAGING REQUIREMENTSTape and Reel Ø 14”: 7500 pieces

2.54 (.100")Max.

4.32 (0.170")Max.

25.4 (1.000")

Min.

.45 ± 0.05(.0177" ± .002")

Dimensions: Millimeters(Inches)

A 1 C

1 0 3

K A B

11 0 7

VOLTAGE(1 = 100V) TEMPERATURE

CHARACTERISTICSAVX

CAPACITANCETOLERANCE

CODE

YEAR (2011) WEEK (7th)


ALPHA-ALPHA,LOT CODEAB=LOT #2 IN WEEK

AA101C103K4RLOT CODE/DATE CODE

=1107AB

AXIAL LEADSSpinGuard® - AA Series - Automotive

081816

C0G (NP0): C = ± .25pF D = ± .5pF F = ±1% G = ±2% J = ±5% K = ±10%

X7R: J = ±5% K = ±10% M = ±20%




PACKAGING REQUIREMENTSTape and Reel Ø 14”: 7500 pieces



Style AA10 AA30Length

(L)4.32

(.170")7.37

(.290")Diameter

(D)2.54

(.100")3.81

(.150")Lead

Diameter.445

(.0175").445

(.0175")

Lead Length

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.

WVDC WVDC200 100 50 100 50

100 AA-----A101K4R120 AA-----A121K4R150 AA-----A151K4R180 AA-----A181K4R220 AA-----A221K4R270 AA-----A271K4R330 AA-----A331K4R390 AA-----A391K4R470 AA-----A471K4R560 AA-----A561K4R680 AA-----A681K4R820 AA-----A821K4R

1,000 AA-----A102K4R1,200 AA-----A122K4R1,500 AA-----A152K4R1,800 AA-----A182K4R2,200 AA-----A222K4R2,700 AA-----A272K4R3,300 AA-----A332K4R3,900 AA-----A392K4R4,700 AA-----A472K4R5,600 AA-----A562K4R6,800 AA-----A682K4R8,200 AA-----A822K4R

10,000 AA-----A103K4R

For other voltage and tolerances contact factory.


AXIAL LEADSSpinGuard® – AA Series – Automotive – C0G (NP0) Dielectric

081819






Style AA10 AA30Length

(L)4.32

(.170")7.37

(.290")Diameter

(D)2.54

(.100")3.81

(.150")Lead

Diameter.445

(.0175").445

(.0175")

Lead Length

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.

WVDC WVDC100 50 100 50

220 AA-----C221K4R270 AA-----C271K4R330 AA-----C331K4R390 AA-----C391K4R470 AA-----C471K4R560 AA-----C561K4R680 AA-----C681K4R820 AA-----C821K4R

1,000 AA-----C102K4R1,200 AA-----C122K4R1,500 AA-----C152K4R1,800 AA-----C182K4R2,200 AA-----C222K4R2,700 AA-----C272K4R3,300 AA-----C332K4R3,900 AA-----C392K4R

,700 AA-----C472K4R5,600 AA-----C562K4R6,800 AA-----C682K4R8,200 AA-----C822K4R

10,000 AA-----C103K4R12,000 AA-----C123K4R15,000 AA-----C153K4R18,000 AA-----C183K4R22,000 AA-----C223K4R27,000 AA-----C273K4R33,000 AA-----C333K4R39,000 AA-----C393K4R47,000 AA-----C473K4R56,000 AA-----C563K4R68,000 AA-----C683K4R82,000 AA-----C823K4R

100,000 AA-----C104K4R

For other voltage and tolerances contact factory.


AXIAL LEADSSpinGuard® – AA Series – Automotive – X7R Dielectric

062019




GENERAL INFORMATIONSA Series

Molded Axial Leaded MLCTemperature Coefficients: C0G (NP0), X7R, Z5U

50V, 100V and 200V

Case Material: Molded EpoxyLead Material: Solderable

HOW TO ORDER

MA10 1045 E A RZ

Molded Axial Size

MA10MA20MA30MA40MA50MA60



DielectricA = C0G (NP0)C = X7RE = Z5U


LeadsA = Standard

Voltage5 = 50V1 = 100V2 = 200V

C0G (NP0): F = ±1% J = ±5% K = ±10% M = ±20% D = ±0.5pF

<10pF only

X7R: J = ±5% K = ±10% M = ±20%

Z5U: M = ±20% Z = +80%

-20%

MARKING (EXAMPLE)Line 1, A (for KYOCERA AVX), 5 = 50 Volts (V is optional),

E = TC Line 2, 104Z = Capacitance Code

Line 3, Tolerance, 2 digit Lot CodeDate Code: 8 = 2008

10 = Week

Four Digit Date Code Optional

Not RoHS Compliant

‡ C tolerance available C0G (NP0) from 1.0 to 9.1 pF only. Minimum tolerance for values 10 pF - 100 pF is D or F whichever is greater.

MILITARY CROSS REFERENCE AND DIMENSIONS GUIDEPer MIL-Spec Case Size

Style MIL-C-11015 MIL-PRF-39014 MIL-PRF-20 Length (L) Diameter (D) Lead

Diameter (LD)MA10 CK12 CKR11 CCR75/CC75 4.07 ± .25

(.160” ± .010”)2.29 ± .25

(.090” ± .010”).48 ± .05

(.019” ± .002”)

MA20 CK13 CKR12 CCR76/CC76 6.35 ± .25(.250” ± .010”)

2.29 ± .25(.090” ± .010”)

.48 ± .05(.019” ± .002”)

MA40 CK14 CKR14 CCR77/CC77 9.91 ± .25(.390” ± .010”)

3.56 ± .25(.140” ± .010”)

.63 ± .05(.025” ± .002”)

MA50 CK15 CKR15 CCR78/CC78 12.7 ± .51(.500” ± .020”)

6.35 ± .38(.250” ± .015”)

.63 ± .05(.025” ± .002”)

MA60 CK16 CKR16 CCR79/CC79 17.53 ± .51(.690” ± .020”)

8.89 ± .51(.350” ± .015”)

.63 ± .05(.025” ± .002”)

For Military/Established Reliability Molded/Axial Lead see MIL-C-11015, MIL-PRF-39014, MIL-PRF-20 Section. Dimensions: Millimeters (Inches)

A5E104ZAA810

AXIAL LEADSCeralam®

111319






Style MA10 MA20 MA30 MA40 MA50 MA60

Length 4.07 ± .25(.160" ± .010")

6.35 ± .25(.250" ± .010")

6.09 ± .25(.240" ± .010")

9.91 ± .25(.390" ± .010")

12.7 ± .51(.500" ± .020")

17.53 ± .51(.690" ± .020")

Diameter 2.29 ± .25(.090" ± .010")

2.29 ± .25(.090" ± .010")

3.30 ± .25(.130" ± .010")

3.56 ± .25(.140" ± .010")

6.35 ± .38(.250" ± .015")

8.89 ± .51(.350" ± .015")

Lead Diameter

.48 ± .05(.019" ± .002")

.48 ± .05(.019" ± .002")

.48 ± .05(.019" ± .002")

.63 ± .05(.025" ± .002")

.63 ± .05(.025" ± .002")

.63 ± .05(.025" ± .002")

Lead Length

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.

WVDC WVDC WVDC WVDC WVDC WVDC200 100 50 200 100 50 200 100 50 200 100 50 200 100 50 200 100 50

1.0 MA-----5A1R0DAAto

9.1 MA-----5A9R1DAA10 MA-----5A100KAA12 MA-----5A120KAA15 MA-----5A150KAA18 MA-----5A180KAA22 MA-----5A220KAA27 MA-----5A270KAA33 MA-----5A330KAA39 MA-----5A390KAA47 MA-----5A470KAA56 MA-----5A560KAA68 MA-----5A680KAA82 MA-----5A820KAA

100 MA-----5A101KAA120 MA-----5A121KAA150 MA-----5A151KAA180 MA-----5A181KAA220 MA-----5A221KAA270 MA-----5A271KAA330 MA-----5A331KAA390 MA-----5A391KAA470 MA-----5A471KAA560 MA-----5A561KAA680 MA-----5A681KAA820 MA-----5A821KAA

1000 MA-----5A102KAA1200 MA-----5A122KAA1500 MA-----5A152KAA1800 MA-----5A182KAA2200 MA-----5A222KAA2700 MA-----5A272KAA3300 MA-----5A332KAA3900 MA-----5A392KAA4700 MA-----5A472KAA5600 MA-----5A562KAA6800 MA-----5A682KAA8200 MA-----5A822KAA

10,000 MA-----5A103KAA12,000 MA-----5A123KAA15,000 MA-----5A153KAA18,000 MA-----5A183KAA22,000 MA-----5A223KAA27,000 MA-----5A273KAA33,000 MA-----5A333KAA39,000 MA-----5A393KAA47,000 MA-----5A473KAA56,000 MA-----5A563KAA68,000 MA-----5A683KAA82,000 MA-----5A823KAA

100,000 MA-----5A104KAA120,000 MA-----5A124KAA150,000 MA-----5A154KAA


AXIAL LEADSCeralam® – C0G (NP0) Dielectric

111319







Length 4.07 ± .25(.160" ± .010")

6.35 ± .25(.250" ± .010")

6.09 ± .25(.240" ± .010")

9.91 ± .25(.390" ± .010")

12.7 ± .51(.500" ± .020")

17.53 ± .51(.690" ± .020")

Diameter 2.29 ± .25(.090" ± .010")

2.29 ± .25(.090" ± .010")

3.30 ± .25(.130" ± .010")

3.56 ± .25(.140" ± .010")

6.35 ± .38(.250" ± .015")

8.89 ± .51(.350" ± .015")

Lead Diameter

.48 ± .05(.019" ± .002")

.48 ± .05(.019" ± .002")

.48 ± .05(.019" ± .002")

.63 ± .05(.025" ± .002")

.63 ± .05(.025" ± .002")

.63 ± .05(.025" ± .002")

Lead Length

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.


220 MA-----5C221KAA270 MA-----5C271KAA330 MA-----5C331KAA390 MA-----5C391KAA470 MA-----5C471KAA560 MA-----5C561KAA680 MA-----5C681KAA820 MA-----5C821KAA

1000 MA-----5C102KAA1200 MA-----5C122KAA1500 MA-----5C152KAA1800 MA-----5C182KAA2200 MA-----5C222KAA2700 MA-----5C272KAA3300 MA-----5C332KAA3900 MA-----5C392KAA4700 MA-----5C472KAA5600 MA-----5C562KAA6800 MA-----5C682KAA8200 MA-----5C822KAA

10,000 MA-----5C103KAA12,000 MA-----5C123KAA15,000 MA-----5C153KAA18,000 MA-----5C183KAA22,000 MA-----5C223KAA27,000 MA-----5C273KAA33,000 MA-----5C333KAA39,000 MA-----5C393KAA47,000 MA-----5C473KAA56,000 MA-----5C563KAA68,000 MA-----5C683KAA82,000 MA-----5C823KAA

100,000 MA-----5C104KAA120,000 MA-----5C124KAA150,000 MA-----5C154KAA180,000 MA-----5C184KAA220,000 MA-----5C224KAA270,000 MA-----5C274KAA330,000 MA-----5C334KAA390,000 MA-----5C394KAA470,000 MA-----5C474KAA560,000 MA-----5C564KAA680,000 MA-----5C684KAA820,000 MA-----5C824KAA

1.0 μF MA-----5C105KAA1.2 μF MA-----5C125KAA1.5 μF MA-----5C155KAA1.8 μF MA-----5C185KAA2.2 μF MA-----5C225KAA2.7 μF MA-----5C275KAA3.3 μF MA-----5C335KAA3.9 μF MA-----5C395KAA


AXIAL LEADSCeralam® - X7R Dielectric

111319







Length 4.07 ± .25(.160" ± .010")

6.35 ± .25(.250" ± .010")

6.09 ± .25(.240" ± .010")

9.91 ± .25(.390" ± .010")

12.7 ± .51(.500" ± .020")

17.53 ± .51(.690" ± .020")

Diameter 2.29 ± .25(.090" ± .010")

2.29 ± .25(.090" ± .010")

3.30 ± .25(.130" ± .010")

3.56 ± .25(.140" ± .010")

6.35 ± .38(.250" ± .015")

8.89 ± .51(.350" ± .015")

Lead Diameter

.48 ± .05(.019" ± .002")

.48 ± .05(.019" ± .002")

.48 ± .05(.019" ± .002")

.63 ± .05(.025" ± .002")

.63 ± .05(.025" ± .002")

.63 ± .05(.025" ± .002")

Lead Length

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

25.4(1.00")

Cap. in. pF

Typical Part Nos.


1000 MA-----5E102ZAA1200 MA-----5E122ZAA1500 MA-----5E152ZAA1800 MA-----5E182ZAA2200 MA-----5E222ZAA2700 MA-----5E272ZAA3300 MA-----5E332ZAA3900 MA-----5E392ZAA4700 MA-----5E472ZAA5600 MA-----5E562ZAA6800 MA-----5E682ZAA8200 MA-----5E822ZAA

10,000 MA-----5E103ZAA12,000 MA-----5E123ZAA15,000 MA-----5E153ZAA18,000 MA-----5E183ZAA22,000 MA-----5E223ZAA27,000 MA-----5E273ZAA33,000 MA-----5E333ZAA39,000 MA-----5E393ZAA47,000 MA-----5E473ZAA56,000 MA-----5E563ZAA68,000 MA-----5E683ZAA82,000 MA-----5E823ZAA

100,000 MA-----5E104ZAA120,000 MA-----5E124ZAA150,000 MA-----5E154ZAA180,000 MA-----5E184ZAA220,000 MA-----5E224ZAA270,000 MA-----5E274ZAA330,000 MA-----5E334ZAA390,000 MA-----5E394ZAA470,000 MA-----5E474ZAA560,000 MA-----5E564ZAA680,000 MA-----5E684ZAA820,000 MA-----5E824ZAA

1.0 μF MA-----5E105ZAA1.2 μF MA-----5E125ZAA1.5 μF MA-----5E155ZAA1.8 μF MA-----5E185ZAA2.2 μF MA-----5E225ZAA2.7 μF MA-----5E275ZAA3.3 μF MA-----5E335ZAA3.9 μF MA-----5E395ZAA4.7 μF MA-----5E475ZAA5.6 μF MA-----5E565ZAA6.8 μF MA-----5E685ZAA8.2 μF MA-----5E825ZAA


AXIAL LEADSCeralam® - Z5U Dielectric

111319




TAPE AND REEL

ADDITIONAL PACKAGING AVAILABLEAMMO PACK

*SpinGuard only

BULK PACK (MOLDED AXIALS ONLY)

CLASS I / RS-296

A.5mm ± 0.5mm (.200” ± 0.020”)

B*.52.4mm ± 1.5mm (2.063” ± 0.059”)

C.6.35mm ± 0.4mm (0.250” ± 0.016”)

D1-D2.1.4mm

(0.055” MAX.)

E.1.2mm

(0.047” MAX.)

F.1.6mm

(0.063” MAX.)

G.356mm (14.00”)

H.76mm

(3.000”)

I.25.4mm (1.000”)

J.84mm

(3.300”)

K.70mm

(2.750”)

Leader Tape: 300mm min. (12”)Splicing: Tape OnlyMissing Parts: 0.25% of component count max.-

No consecutive missing parts

REEL QUANTITIES (MAX.) ‡SA05 7,500 pcs. MA10 5,000 pcs.SA10 7,500 pcs. MA20 5,000 pcs.SA11 5,000 pcs. MA30 3,000 pcs.SA20 5,000 pcs. MA40 3,000 pcs.SA30 5,000 pcs. MA50 950 pcs.SA40 5,000 pcs. MA60 650 pcs.

‡ 1000 pc. reels available for distribution pack only in ±1% and ±2% tolerance.

* Standard Tape Spacing Shown. Also available in 26.0mm + 1.5mm, – 0mm, (1.023 in. + .059 in. -0 in. ) for SpinGuards only. EIA Class I, II and III tape spacings are available for molded axials. Tape spacing for Class II is 63.5mm ± 1.5mm (2.50 in ± .059 in), and for Class III 73mm ± 1.5mm (2.87 in ± .059 in)

MA10 MA20 MA30 MA40

100 pcs. (bag)

MA50 MA60 50 pcs. (bag)

Tape Spacing

SA05, SA10 SA20

SA11 SA30 SA40

BOX SIZES (Nominal)

L W H

52.4mm ± 1.5mm (2.062” ± .059”) 4,000 pcs. 2000 2,000 pcs. 255mm

(10.039”)73mm

(2.874”)93mm

(3.661”)

26.0mm + 1.5mm - 0mm (1.023” + .059” - 0”) 4,000 pcs.* 2000 2,000 pcs.* 255mm

(10.039”)48mm

(1.889”)113mm (4.448”)

AXIAL LEADSPackaging

111319




HOW TO ORDERMilitary Type Designation: Styles CKR04, CKR05, CKR06, CKR08

Dash Number Option: MIL-PRF-39014/01 (Appropriate Dash Number)

CKR05 BX K (V)104 S

Style CK = General purpose,

ceramic dielectric, fixed capacitors

R = Established Reliability Parts

05 = Remaining two numbers identify shape and dimension

Voltage-Temperature Limits

First letter identifies temperature range.

B = -55ºC to +125ºC Second letter identifies

voltage-temperature coefficient.


K = ±10%M = ±20%

Standoff Option

To order standoff option, place “V” at the end of the part

number. Example:

CKR05BX104KSV


Military Failure Rate

M = 1% per 1000 hoursP = 0.1% per 1000 hoursR = 0.01% per 1000 hoursS = 0.001% per 1000 hours

Note:KYOCERA AVX reserves the right to substitutea lower failure rate part per MIL-PRF-39014. Substitutability for failure rate levels shall be as follows:

Not RoHS Compliant

Capacitance Change with Reference to 25°C

Second Letter

No Voltage

Rated Voltage

X +15, -15% +15, -25%Failure Rate Level Will Replace

Failure Rate Level

S (STD) (X-ray) R, P, M, LR (STD) (No X-ray) P, M, L

P M,L

M L

PACKAGING REQUIREMENTSPackaging: 100 Pcs/bag; Radial Tape and Reel Packaging available upon request (2500 pcs./reel).

SIZE SPECIFICATIONS millimeters (Inches)Per Mil Spec Case Size

MIL-PRF-39014 Length (L)

Width (W)

Thickness (T)

Lead Spacing

(L.S.)

Lead Diameter

(L.D.)CKR04(Fig. 2)

4.83±.25(.190±.010)

4.83±.25(.190±.010)

2.29±.25(.090±.010)

2.54±.38(.100±.015)

.64±.05(.025±.002)

CKR05(Fig. 1, 4)

4.83±.25(.190±.010)

4.83±.25(.190±.010)

2.29±.25(.090±.010)

5.08±.38(.200±.015)

.64±.05(.025±.002)

CKR06(Fig. 2, 3)

7.37±.25(.290±.010)

7.37±.25(.290±.010)

2.29±.25(.090±.010)

5.08±.38(.200±.015)

.64±.05(.025±.002)

CKR08(Fig. 2)

7.37±.25(.290±.010)

7.37±.25(.290±.010)

3.68±.38(.145±.015)

5.08±.38(.200±.015)

.64±.05(.025±.002)

MARKING RADIAL LEAD

Front

M39014/011595

J AVX0810

A

M390142-1350

AVX

0810AJ 50V105K

Abb. Military Part NumberMilitary Slash/Dash NumberMfg. I.D. Symbol

Mfg. I.D. SymbolDate CodeLot Code

Abb. Military Part NumberMilitary Slash NumberMilitary Dash Number

Date CodeLot Code

J for JANVoltage Rating

Capacitance Value(3 digit Code)& Cap. Tol.

J for JANBack

CKR04/CKR05

CKR06/CKR08

MILITARYMIL-PRF-39014Radial Leads

062821

Only CKR05 and CKR06 can be offered on T&R




MILITARY DASH NUMBER IDENTIFICATION CKR04 TO MIL-PRF-39014/23(Dash Number From Table)

Military Type

Designation

Failure Rate Level (%/1,000 Hours)Capacitance

(pF)

CapacitanceTolerance±Percent WVDC1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S)

CKR04 (BX)CKR04BX100K_CKR04BX100M_CKR04BX120K_CKR04BX150K_CKR04BX150M_

00010002000300040005

01010102010301040105

02010202020302040205

03010302030303040305

1010121515

1020101020

200200200200200

CKR04BX180K_CKR04BX220K_CKR04BX220M_CKR04BX270K_CKR04BX330K_

00060007000800090010

01060107010801090110

02060207020802090210

03060307030803090310

1822222733

1010201010

200200200200200

CKR04BX330M_CKR04BX390K_CKR04BX470K_CKR04BX470M_CKR04BX560K_

00110012001300140015

01110112011301140115

02110212021302140215

03110312031303140315

3339474756

2010102010

200200200200200

CKR04BX680K_CKR04BX680M_CKR04BX820K_CKR04BX101K_CKR04BX101M_

00160017001800190020

01160117011801190120

02160217021802190220

03160317031803190320

686882

100100

1020101020

200200200200200


00210022002300240025

01210122012301240125

02210222022302240225

03210322032303240325

120150150180220

1010201010

200200200200200


00260027002800290030

01260127012801290130

02260227022802290230

03260327032803290330

220270330330390

2010102010

200200200200200


00310032003300340035

01310132013301340135

02310232023302340235

03310332033303340335

470470560680680

1020101020

200200200200200


00360037003800390040

01360137013801390140

02360237023802390240

03360337033803390340

8201,0001,0001,2001,500

1010201010

200200200100100


00410042004300440045

01410142014301440145

02410242024302440245

03410342034303440345

1,5001,8002,2002,2002,700

2010102010

100100100100100


00460047004800490050

01460147014801490150

02460247024802490250

03460347034803490350

3.3003.3003,9004.7004.700

1020101020

100100100100100


00510052005300540055

01510152015301540155

02510252025302540255

03510352035303540355

5,6006,8006,8008,200

10,000

1010201010

100100100100100


00560057005800590060

01560157015801590160

02560257025802590260

03560357035803590360

10,00012,00015.00015.00018.000

2010102010

10050505050


00610062006300640065

01610162016301640165

02610262026302640265

03610362036303640365

22,00022,00027.00033.00033.000

1020101020

5050505050


00660067006800690070

01660167016801690170

02660267026802690270

03660367036803690370

39.00047.00047.00056.00068.000

1010201010

5050505050

CKR04BX683M_CKR04BX823K_CKR04BX104K_CKR04BX104M_

0071007200730074

0171017201730174

0271027202730274

0371037203730374

68,00082,000

100,000100,000

20101020

50505050

Add appropriate failure rate level letter (M, P, R or S)


111319





Military Type

Designation


(pF)



12011202120312041205

12411242124312441245

12811282128312841285

13211322132313241325

1010121515

1020101020

200200200200200


12061207120812091210

12461247124812491250

12861287128812891290

13261327132813291330

1822222733

1010201010

200200200200200


12111212121312141215

12511252125312541255

12911292129312941295

13311332133313341335

3339474756

2010102010

200200200200200


12161217121812191220

12561257125812591260

12961297129812991300

13361337133813391340

686882

100100

1020101020

200200200200200


12211222122312241225

12611262126312641265

13011302130313041305

13411342134313441345

120150150180220

1010201010

200200200200200


12261227122812291230

12661267126812691270

13061307130813091310

13461347134813491350

220270330330390

2010102010

200200200200200


12311232123312341235

12711272127312741275

13111312131313141315

13511352135313541355

470470560680680

1020101020

200200200200200


12361237123812391240

12761277127812791280

13161317131813191320

13561357135813591360

8201,0001,0001,2001,500

1010201010

200200200100100


14411442144314441445

14811482148314841485

15211522152315241525

15611562156315641565

1,5001,8002,2002,2002,700

2010102010

100100100100100


14461447144814491450

14861487148814891490

15261527152815291530

15661567156815691570

3.3003.3003,9004.7004.700

1020101020

100100100100100


14511452145314541455

14911492149314941495

15311532153315341535

15711572157315741575

5,6006,8006,8008,200

10,000

1010201010

100100100100100


14561457145814591460

14961497149814991500

15361537153815391540

15761577157815791580

10,00012,00015.00015.00018.000

2010102010

10050505050


14611462146314641465

15011502150315041505

15411542154315441545

15811582158315841585

22,00022,00027.00033.00033.000

1020101020

5050505050


14661467146814691470

15061507150815091510

15461547154815491550

15861587158815891590

39.00047.00047.00056.00068.000

1010201010

5050505050

CKR05BX683M_CKR05BX823K_CKR05BX104K_CKR05BX104M

1471147214731474

1511151215131514

1551155215531554

1591159215931594

68,00082,000

100,000100,000

20101020

50505050



111319





Military Type

Designation

Failure Rate Level (%/1,000 Hours) Capacitance(pF)

CapacitanceTolerance±Percent

WVDC1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S)

CKR06 (BX)CKR06BX122K_CKR06BX152K_CKR06BX152M_CKR06BX182K_CKR06BX222K_

1201120212031204 1206

1241124212431244 1246

1281128212831284 1286

1321132213231324 1326

12001500150018002200

1010201010

200200200200200


1207120812091210 1211

12471248124912501251

12871288128912901291

13271328132913301331

22002700330033003900

2010102010

200200200200200


12121213121412151216

12521253125412551256

12921293129412951296

13321333133413351336

47004700560068006800

1020101020

200200200200200


12171218121912311220

12571258125912711260

12971298129913111300

13371338133913511340

820010,00010,00012,00015,000

1010201010

200200200100100

CKR06BX183K_CKR06BX223K_CKR06BX273K_CKR06BX333K_CKR06BX393K_

12211222123212231224

12611262127212631264

13011302131213031304

13411342135213431344

18,00022,00027.00033.00039.000

1010101010

100100100100100


12251226122712291230

12651266126712691270

13051306130713091310

13451346134713491350

47.00056.00068.00082,000

100,000

1010101010

100100100100100


12331234123512361237

12731274127512761277

13131314131513161317

13531354135513561357

120,000150.000180.000220,000270,000

1010101010

5050505050


12381239124014041405

12781279128014081409

13181319132014121413

13581359136014161417

330.000390.000470.000560.000680.000

1010101010

5050505050

CKR06BX824K_CKR06BX105K_

14061407

14101411

14141415

14181419

820,0001,000,000

1010

5050


CKR08 TO MIL-PRF-39014/20 (DASH NUMBER FROM TABLE)

CROSS REFERENCE CHART - MILITARY FOR MOLDED RADIAL LEAD

Add appropriate failure rate level letter (M)

Military Type

Designation

Failure Rate Level (%/1,000 Hours) Capacitance (pF)

Capacitance Tolerance ±Percent

WVDC1.0 (M)

CKR08 (BX)CKR08BX125K_ CKR08BX155K_ CKR08BX205K_

010401050106

1,200,0001,500,0002,000,000

101010

505050


Per Mil-Spec Case Size

Figure Style MIL-C-11015 MIL-PRF-39014 MIL-PRF-20 Length(L) Width (W) Thickness (T) Lead

Spacing (LS)Lead

Diameter (LD)

1 MR05 CK05 CKR05 CCR05/CC05 4.83±.25 (.190±.010) 4.83±.25 (.190±.010) 2.29±.25 (.090±.010) 5.08±.38 (.200±.015) .64±.05 (.025±.002)

2 MR04 — CKR04 CCR09/CC09 4.83±.25 (.190±.010) 4.83±.25 (.190±.010) 2.29±.25 (.090±.010) 2.54±.38 (.100±.015) .64±.05 (.025±.002)

2 MR06 CK06 CKR06 CCR06/CC06 7.37±.25 (.290±.010) 7.37±.25 (.290±.010) 2.29±.25 (.090±.010) 5.08±.38 (.200±.015) .64±.05 (.025±.002)

2 MR68 — CKR08 — 7.37±.25 (.290±.010) 7.37±.25 (.290±.010) 3.68±.38 (.145±.015) 5.08±.38 (.200±.015) .64±.05 (.025±.002)

2 MR07 — — CCR07/CC07 12.19±.51 (.480±.020) 12.19±.51 (.480±.020) 3.56±.25 (.140±.010) 10.16±.51 (.400±.020) .64±.05 (.025±.002)

2 MR08 — — CCR08/CC08 12.19±.51 (.480±.020) 12.19±.51 (.480±.020) 6.1±.25 (.240±.010) 10.16±.51 (.400±.020) .64±.05 (.025±.002)


111319




HOW TO ORDERMilitary Type Designation: Styles CKR11, CKR12, CKR14, CKR15, CKR16

Dash Number Option: MIL-PRF-39014/05 (Add Appropriate Dash Number)

CKR11 BX K103 S

Style CK= General purpose,


R = Established Reliability parts







K = ±10%M = ±20%




Note:KYOCERA AVX reserves the right to substitute a lower failure rate part per MIL-PRF-39014/5E.Substitutability for failure rate levels shall be as follows:

Not RoHS Compliant


Second Letter

No Voltage

Rated Voltage

R +15, -15% +15, -40%

X +15, -15% +15, -25% Failure Rate Level Will Replace Failure Rate Level


P M,L

M L

PACKAGING REQUIREMENTSPackaging: Bulk

CKR11, 12, & 14 100 pcs per bagCKR15 & 16 50 pcs per bagTape & ReelCKR11, 12 5000 pcs per reelCKR14 3000 pcs per reelCKR15 950 pcs per reelCKR16 650 pcs per reel

SIZE SPECIFICATIONS Dimensions: Millimeters (Inches)

Per Mil Spec Case Size

MIL-PRF-39014

Length (L)

Diameter (D)


CKR11 4.07±.25(.160±.010)

2.29±.25(.090±.010)

.48±.05(.019±.002)

CKR12 6.35±.25(.250±.010)

2.29±.25(.090±.010)

.48±.05(.019±.002)

CKR14 9.91±.25(.390±.010)

3.56±.25(.140±.010)

.63±.025(.025±.002)

CKR15 12.7±.51(.500±.020)

6.35±.38(.250±.015)

.63±.05(.025±.002)

CKR16 17.53±.51(.690±.020)

8.89±.51(.350±.020)

.63±.05(.025±.002)

MILITARYMIL-PRF-39014Axial Leads

111319





Military Type

Designation


(pF)



26012602260326042605

28012802280328042805

20012002200320042005

22012202220322042205

1010121515

1020101020

100100100100100


26062607260826092610

28062807280828092810

20062007200820092010

22062207220822092210

1822222733

1010201010

100100100100100


26112612261326142615

28112812281328142815

20112012201320142015

22112212221322142215

3339474756

2010102010

100100100100100


26162617261826192620

28162817281828192820

20162017201820192020

22162217221822192220

686882

100100

1020101020

100100100100100


26212622262326242625

28212822282328242825

20212022202320242025

22212222222322242225

120150150180220

1010201010

100100100100100


26262627262826292630

28262827282828292830

20262027202820292030

22262227222822292230

220270330330390

2010102010

100100100100100


26312632263326342635

28312832283328342835

20312032203320342035

22312232223322342235

470470560680680

1020101020

100100100100100

CKR11BX821K_CKR11BX102K_CKR11BX102M_CKR11BX122K_CKR11BX152K

26362637263826392640

28362837283828392840

20362037203820392040

22362237223822392240

8201000100012001500

1010201010

100100100100100


26412642264326442645

28412842284328442845

20412042204320442045

22412242224322442245

15001800220022002700

2010102010

100100100100100


26462647264826492650

28462847284828492850

20462047204820492050

22462247224822492250

33003300390047004700

1020101020

100100100100100

CKR11BX562K_CKR11BX682K_CKR11BX682M_CKR11BX822K_CKR11BX103K_CKR11BX103M_

265126522653265426552656

285128522853285428552856

205120522053205420552056

225122522253225422552256

5600680068008200

10,00010,000

101020101020

505050505050



111319




MILITARY DASH NUMBER IDENTIFICATION CKR12/14/15 TO MIL-PRF-39014/05(Dash Number From Table)

Military Type

Designation


(pF)



2657265826592660 2661

2857285828592860 2861

2057205820592060 2061

2257225822592260 2261

5600680068008200

10,000

1010201010

100100100100100


26622663266426652666

28622863286428652866

20622063206420652066

22622263226422652266

10,00012,00015.00015.00018.000

2010102010

10050505050


26672668266926702671

28672868286928702871

20672068206920702071

22672268226922702271

22,00022,00027.00033.00033.000

1020101020

5050505050

CKR12BX393K_CKR12BX473K_CKR12BX473M_

267226732674

287228732874

207220732074

227222732274

39.00047.00047.000

101020

505050


26752676267726782679

28752876287728782879

20752076207720782079

22752276227722782279

12,00015.00015.00018.000 22,000

1010201010

100100100100100


26802681268226832684

28802881288228832884

20802081208220832084

22802281228222832284

22,00027.00033.00033.00039.000

2010102010

100100100100100


2685268626872688 2689

2885288628872888 2889

2085208620872088 2089

2285228622872288 2289

47.00047.00056.00068.000 68,000

1020101020

100100505050


269026912692

289028912892

209020912092

229022912292

82,000100,000100,000

101020

505050

CKR14 (BR)CKR14BR563K_CKR14BR683K_CKR14BR683M_CKR14BR823K_CKR14BR104K_

26932694269526962697

28932894289528962897

20932094209520962097

22932294229522962297

56.00068.000 68,000 82,000

100,000

1010201010

100100100100100

CKR14BR104M_CKR14BR124K_CKR14BR154K_CKR14BR154M_CKR14BR184K_

26982699270027012702

28982899290029012902

209820992100 2101 2102

22982299230023012302

100,000120,000150.000150.000180.000

2010102010

10050505050

CKR14BR224K_CKR14BR224M_CKR14BR274K_

270327042705

290329042905

210321042105

230323042305

220,000220,000270,000

102010

505050

CKR15 (BX)CKR15BX563K_CKR15BX683K_CKR15BX683M_CKR15BX823K_CKR15BX104K_CKR15BX104M_

270627072708270927102711

290629072908290929102911

21062107210821092110 2111

230623072308230923102311

56.00068.000 68,000 82,000

100,000100,000

101020101020

100100100100100100



111319




MILITARY DASH NUMBER IDENTIFICATION CKR15/16 TO MIL-PRF-39014/05(Dash Number From Table)

Military Type

Designation


(pF)


CKR15 (BR)CKR15BR124K_CKR15BR154K_CKR15BR154M_CKR15BR184K_CKR15BR224K_

27122713271427152716

29122913291429152916

21122113211421152116

23122313231423152316

120,000150.000150.000180.000 220,000

1010201010

100100100100100

CKR15BR224M_CKR15BR274K_CKR15BR334K_CKR15BR334M_CKR15BR474K_

27172718271927202721

29172918291929202921

2117211821192120 2121

23172318231923202321

220,000270.000330.000330.000470.000

2010102010

10010010010050

CKR15BR474M_CKR15BR684K_CKR15BR684M_CKR15BR105K_CKR15BR105M_

27222723272427252726

29222923292429252926

21222123212421252126

23222323232423252326

470.000680.000 680,000

1,000,0001,000,000

2010201020

5050505050

CKR16 (BR)CKR16BR474K_CKR16BR474M_CKR16BR684K_CKR16BR684M_CKR16BR105K_

27272728272927302731

29272928292929302931

21272128212921302131

23272328232923302331

470.000470.000680.000680,000

1,000,000

1020102010

100100100100100


27322733273427352736

29322933293429352936

21322133213421352136

23322333233423352336

1,000,0002,200,0002,200,0003.300.0003.300.000

2010201020

10050505050


MARKING

J for JAN, A for AVXCapacitance Value (3 digit code)K for Cap. Tol. code (K±10%, M±20%)S for failure rate, 2 digit year2 digit week, 2 digit Lot Code

J A100

KS0810AA

CKR11

CKR122257J

0810AA04222

StyleMilitary Slash/Dash Number "J" or "JA"4 digit Date Code, 2 digit Lot CodeAVX FSCM

CKR12

M390145-2291

AVX0810AA

J50V104K

Abb. Military Part NumberMilitary Slash/Dash NumberMfg. I.D. Symbol4 digit Date Code, 2 digit Lot Code"J" Brand Symbol, VoltageCapacitance Value (3 digit code) and Cap. Tolerance

CKR14, 15, 16

CROSS REFERENCE CHART - MILITARY FOR MOLDED AXIAL LEADPer Mil-Spec Case Size

Style MIL-C-11015 MIL-PRF-39014 MIL-PRF-20 Length (L) Diameter (D) Lead Diameter (L.D.)

MA10 CK12 CKR11 CCR75/CC754.07 ±.25

(.160±.010)2.29±.25

(.090±.010).48±.05

(.019±.002)

MA20 CK13 CKR12 CCR76/CC766.35 ±.25

(.250 ±.010)2.29±.25

(.090±.010).48±.05

(.019±.002)

MA30 — — —6.10 ±.25

(.240±.010)3.30±.25

(.130±.010).48±.05

(.019±.002)

MA40 CK14 CKR14 CCR77/CC779.91±.25

(.390±.010)3.56±.25)

(.140±.010).63±.05

(.025±.002)

MA50 CK15 CKR15 CCR78/CC7812.7±.51

(.500±.020)6.35±.38

(.250±.015).63±.05

(.025±.002)

MA60 CK16 CKR16 CCR79/CC7917.53±.51(.690±.020)

8.89±.51(.350±.015)

.63±.05(.025±.002)



111319




L

SEENOTE 1

SEENOTE 2

.012.004

.325.035

.400 max.

TMAX.

MAX.H2

H1

.015MIN

.019 .004

.058 .012

Note 1 = Leads centered within .005"Note 2 = Angle shall be 95, +10, -5 .019 .004

.010 MAX.

60 TYP.20

SeeNote 3

Note 3 = .140 .020 inch (3.56 0.51mm) for standard lead length; .170 .010 inch (4.32 0.25mm) for optional longer lead length.

HOW TO ORDERMilitary Type Designation: Styles CKR22, CKR23, CKR24

Dash Number Option: MIL-PRF-39014/22 (Add Appropriate Dash Number)

CKR22 BX K104 R



R = Established Reliability parts




B = -55ºC to +125ºC C = -55ºC to +125ºC

Second letter identifies voltage-temperature coefficient.


D = ±.5pFF = ±1%J = ±5%

K = ±10%M = ±20%




Note:KYOCERA AVX reserves the right to substitute a lower failure rate part per MIL-PRF-39014. Substitutability for failure rate levels shall be as follows:

Not RoHS Compliant


Second Letter

No Voltage

Rated Voltage

G +30, -30ppm +30, -30ppm

H +60, -60ppm +60, -60ppm

R +15, -15% +15, -40%

X +15, -15% +15, -25%

Failure Rate Level Will Replace Failure Rate Level


P M,L

M L

PACKAGING REQUIREMENTSPackaging: MD01/MD02: 200 pcs/slide pack. See page 35.

MD03: 200 pcs per vial.200 pcs per slide pack upon request.


MIL-PRF-39014

Length (L)

Height (H1)

Height (H2) Thickness

CKR22 6.60(.260 ±.020)

3.25(.128 ±.007)

4.45 max. (.175)

2.34(.092 ±.006)

CKR23 6.60(.260 ±.020)

3.94(.155 ±.007)

4.95 max. (.195)

2.34(.092 ±.006)

CKR24 6.60(.260 ±.020)

7.19(.283 ±.007)

8.13 max. (.320)

2.34(.092 ±.006)

MILITARYMIL-PRF-390142Pin DIP

111319





Military Type

Designation

Failure Rate Level (%/1,000 Hours)

Capacitance(pF)

Capacitance Tolerance WVDC

Standard Lead Length Optional Longer Lead Length

1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S)

Style CKR22, Voltage-temperature limits of 0 ± 60 ppm/°C.CKR22CH1R0D_CKR22CH1R2D_CKR22CH1R5D_CKR22CH1R8D_CKR22CH2R2D_

00010004000700100013

03010304030703100313

06010604060706100613

09010904090709100913

30013004300730103013

33013304330733103313

36013604360736103613

39013904390739103913

1.01.21.51.82.2

DDDDD

200

200

CKR22CH2R7D_CKR22CH3R3D_CKR22CH3R9D_CKR22CH4R7D_CKR22CH5R6D_

00160019002200250028

03160319032203250328

06160619062206250628

09160919092209250928

30163019302230253028

33163319332233253328

36163619362236253628

39163919392239253928

2.73.33.94.75.6

DDDDD

CKR22CH6R8D_CKR22CH8R2D_CKR22CH100D_CKR22CH100J_CKR22CH100K_

00310034003700380039

03310334033703380339

06310634063706380639

09310934093709380939

30313034303730383039

33313334333733383339

36313634363736383639

39313934393739383939

6.88.2101010

DDDJK

CKR22CH120D_CKR22CH120J_CKR22CH120K_CKR22CH150D_CKR22CH150J

00400041004200430044

03400341034203430344

06400641064206430644

09400941094209430944

30403041304230433044

33403341334233433344

36403641364236433644

39403941394239433944

1212121515

DJKDJ

CKR22CH150K_CKR22CH180D_CKR22CH180J_CKR22CH180K_

0045004600470048

0345034603470348

0645064606470648

0945094609470948

3045304630473048

3345334633473348

3645364636473648

3945394639473948

15181818

KDJK

Style CKR22, Voltage-temperature limits of ±30 ppm/°C,CKR22CG220D_CKR22CG220J_CKR22CG220K_CKR22CG270D_CKR22CG270J

00490050005100520053

03490350035103520353

06490650065106520653

09490950095109520953

30493050305130523053

33493350335133523353

36493650365136523653

39493950395139523953

2222222727

DJKDJ

200

200

CKR22CG270K_CKR22CG330D_CKR22CG330J_CKR22CG330K_CKR22CG390D_

00540055005600570058

03540355035603570358

06540655065606570658

09540955095609570958

30543055305630573058

33543355335633573358

36543655365636573658

39543955395639573958

2733333339

KDJKD

CKR22CG390J_CKR22CG390K_CKR22CG470D_CKR22CG470J_CKR22CG470K_

00590060006100620063

03590360036103620363

06590660066106620663

09590960096109620963

30593060306130623063

33593360336133623363

36593660366136623663

39593960396139623963

3939474747

JKDJK

CKR22CG560D_CKR22CG560J_CKR22CG560K_CKR22CG680F_CKR22CG680J_

00640065006600670068

03640365036603670368

06640665066606670668

09640965096609670968

30643065306630673068

33643365336633673368

36643665366636673668

39643965396639673968

5656566868

DJKFJ

CKR22CG680K_CKR22CG820F_CKR22CG820J_CKR22CG820K_CKR22CG101F

00690070007100720073

03690370037103720373

06690670067106720673

09690970097109720973

30693070307130723073

33693370337133723373

36693670367136723673

39693970397139723973

68828282

100

KFJKF

CKR22CG101J_CKR22CG101K_CKR22CG121F_CKR22CG121J_CKR22CG121K_

00740075007600770078

03740375037603770378

06740675067606770678

09740975097609770978

30743075307630773078

33743375337633773378

36743675367636773678

39743975397639773978

100100120120120

JKFJK

CKR22CG151F_CKR22CG151J_CKR22CG151K_CKR22CG181F_CKR22CG181J

00790080008100820083

03790380038103820383

06790680068106820683

09790980098109820983

30793080308130823083

33793380338133823383

36793680368136823683

39793980398139823983

150150150180180

FJKFJ

CKR22CG181K_CKR22CG221F_CKR22CG221J_CKR22CG221K_CKR22CG271F_

00840085008600870088

03840385038603870388

06840685068606870688

09840985098609870988

30843085308630873088

33843385338633873388

36843685368636873688

39843985398639873988

180220220220270

KFJKF

CKR22CG271J_ 0089 0389 0689 0989 3089 3389 3689 3989 270 J



111319





Military Type

Designation


Capacitance(pF)



1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S)

Style CKR22, Voltage-temperature limits of ±30 ppm/°C, (continued)


00900091009200930094

03900391039203930394

06900691069206930694

09900991099209930994

30903091309230933094

33903391339233933394

36903691369236933694

39903991399239933994

270330330330390

KFJKF

200

200

100

10050

50


00950096009700980099

03950396039703980399

06950696069706980699

09950996099709980999

30953096309730983099

33953396339733983399

36953696369736983699

39953996399739983999

390390470470470

JKFJK

CKR22CG561F_CKR22CG561J_CKR22CG561K_CKR22CG681F_CKR22CG681J_

01000101010201030104

04000401040204030404

07000701070207030704

10001001100210031004

31003101310231033104

34003401340234033404

37003701370237033704

40004001400240034004

560560560680680

FJKFJ


0105010601070108 0109

04050406040704080409

07050706070707080709

1005100610071008 1009

31053106310731083109

34053406340734083409

37053706370737083709

40054006400740084009

680820820820

1000

KFJKF


01100111011201130114

04100411041204130414

07100711071207130714

10101011101210131014

31103111311231133114

34103411341234133414

37103711371237133714

40104011401240134014

10001000120012001200

JKFJK


0115011601170118 0119

04150416041704180419

07150716071707180719

1015101610171018 1019

31153116311731183119

34153416341734183419

37153716371737183719

40154016401740184019

15001500150018001800

FJKFJ


01200121012201230124

04200421042204230424

07200721072207230724

10201021102210231024

31203121312231233124

34203421342234233424

37203721372237233724

40204021402240234024

18002200220022002700

KFJKF


0125012601270128 0129

04250426042704280429

07250726072707280729

1025102610271028 1029

31253126312731283129

34253426342734283429

37253726372737283729

40254026402740284029

27002700330033003300

JKFJK


01300131013201330134

04300431043204330434

07300731073207330734

10301031103210331034

31303131313231333134

34303431343234333434

37303731373237333734

40304031403240334034

39003900390047004700

FJKFJ


01350136013701380139

04350436043704380439

07350736073707380739

10351036103710381039

31353136313731383139

34353436343734383439

37353736373737383739

40354036403740384039

47005600560056006800

KFJKF


01400141014201430144

04400441044204430444

07400741074207430744

10401041104210431044

31403141314231433144

34403441344234433444

37403741374237433744

40404041404240434044

68006800820082008200

JKFJK

CKR22CG103F_CKR22CG103J_CKR22CG103K_

014501460147

044504460447

074507460747

104510461047

314531463147

344534463447

374537463747

404540464047

10,00010,00010,000

FJK



111319





Military Type

Designation


Capacitance(pF)



1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S)

Style CKR22, Voltage-temperature limits of ±15% (+15%, -25% for Rated Voltage)


01480149015001510152

04480449045004510452

07480749075007510752

10481049105010511052

31483149315031513152

34483449345034513452

37483749375037513752

40484049405040514052

270330330390470

KKMKK

200

200

100

100

50

50


01530154015501560157

04530454045504560457

07530754075507560757

10531054105510561057

31533154315531563157

34533454345534563457

37533754375537563757

40534054405540564057

470560680680820

MKKMK

CKR22BX102K_CKR22BX102M_CKR22BX122K_CKR22BX152K_CKR22BX152M

015801590160 0161 0162

04580459046004610462

07580759076007610762

105810591060 1061 1062

31583159316031613162

34583459346034613462

37583759376037613762

40584059406040614062

1,0001,0001,2001.5001.500

KMKKM


0163016401650166 0167

04630464046504660467

07630764076507660767

1063106410651066 1067

31633164316531663167

34633464346534663467

37633764376537663767

40634064406540664067

1,8002,2002,2002,7003,300

KKMKK


01680169017001710172

04680469047004710472

07680769077007710772

10681069107010711072

31683169317031713172

34683469347034713472

37683769377037713772

40684069407040714072

3,3003,9004.7004.700 5,600

MKKMK


01730174017501760177

04730474047504760477

07730774077507760777

10731074107510761077

31733174317531763177

34733474347534763477

37733774377537763777

40734074407540764077

6,8006,8008,200

10,00010,000

KMKKM


017801790180 0181 0182

04780479048004810482

07780779078007810782

107810791080 1081 1082

31783179318031813182

34783479348034813482

37783779378037813782

40784079408040814082

12,00015.00015.00018.000 22,000

KKMKK


0183018401850186 0187

04830484048504860487

07830784078507860787

1083108410851086 1087

31833184318531863187

34833484348534863487

37833784378537863787

40834084408540864087

22,00027.00033.00033.00039.000

MKKMK


01880189019001910192

04880489049004910492

07880789079007910792

10881089109010911092

31883189319031913192

34883489349034913492

37883789379037913792

40884089409040914092

47.00047.00056.00068.000 68,000

KMKKM


019301940195

049304940495

079307940795

109310941095

319331943195

349334943495

379337943795

409340944095

82,000100,000100,000

KKM



111319





Military Type

Designation


Capacitance(pF)



1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S)

Style CKR23, Voltage-temperature limits of 0 ± 60 ppm/°C


02580259026002610262

05580559056005610562

08580859086008610862

11581159116011611162

32583259326032613262

35583559356035613562

38583859386038613862

41584159416041614162

560560560680680

FJKFJ

200

200100

10050

50


02630264026502660267

05630564056505660567

08630864086508660867

11631164116511661167

32633264326532663267

35633564356535663567

38633864386538663867

41634164416541664167

680820820820

1,000

KFJKF


02680269027002710272

05680569057005710572

08680869087008710872

11681169117011711172

32683269327032713272

35683569357035713572

38683869387038713872

41684169417041714172

1,0001,0001,2001,2001,200

JKFJK

CKR23CG272F_CKR23CG272J_CKR23CG272K"_CKR23CG332F_CKR23CG332J_

02730274027502760277

05730574057505760577

08730874087508760877

11731174117511761177

32733274327532763277

35733574357535763577

38733874387538763877

41734174417541764177

2.7002.7002.7003.3003.300

FJKFJ


02780279028002810282

05780579058005810582

08780879088008810882

11781179118011811182

32783279328032813282

35783579358035813582

38783879388038813882

41784179418041814182

3,3004.7004.7004.7005,600

KFJKF


02830284028502860287

05830584058505860587

08830884088508860887

11831184118511861187

32833284328532863287

35833584358535863587

38833884388538863887

41834184418541864187

5.6005.6006,8006,8006,800

JKFJK

CKR23CG822F_CKR23CG822J_CKR23CG822K_CKR23CG103F_CKR23CG103J_CKR23CG103K_

028802890290029102920293

058805890590059105920593

088808890890089108920893

118811891190119111921193

328832893290329132923293

358835893590359135923593

388838893890389138923893

418841894190419141924193

8,2008,2008,200

10,00010,00010,000

FJKFJK

Style CKR23, voltage-temperature limits of ±15% (+15%, -25% for Rated Voltage)CKR23BX102K_CKR23BX102M_CKR23BX122K_CKR23BX152K_

0196019701980199

0496049704980499

0796079707980799

1096109710981099

3196319731983199

3496349734983499

3796379737983799

4096409740984099

1,0001,0001,2001,500

KMKK

200

200100

10050

50


02000201020202030204

05000501050205030504

08000801080208030804

11001101110211031104

32003201320232033204

35003501350235033504

38003801380238033804

41004101410241034104

1,5001,8002,2002,2002,700

MKKMK


02050206020702080209

05050506050705080509

08050806080708080809

11051106110711081109

32053206320732083209

35053506350735083509

38053806380738083809

41054106410741084109

3.3003.3003,9004.7004.700

KMKKM


02100211021202130214

05100511051205130514

08100811081208130814

11101111111211131114

32103211321232133214

35103511351235133514

38103811381238133814

41104111411241134114

5,6006,8006,8008,200

10,000

KKMKK


02150216021702180219

05150516051705180519

08150816081708180819

11151116111711181119

32153216321732183219

35153516351735183519

38153816381738183819

41154116411741184119

10,00012,00015.00015.00018.000

MKKMK


02200221022202230224

05200521052205230524

08200821082208230824

11201121112211231124

32203221322232233224

35203521352235233524

38203821382238233824

41204121412241234124

22,00022,00027.00033.00033.000

KMKKM


02250226022702280229

05250526052705280529

08250826082708280829

11251126112711281129

32253226322732283229

35253526352735283529

38253826382738283829

41254126412741284129

39.00047.00047.00056.00068.000

KKMKK


02300231023202330234

05300531053205330534

08300831083208330834

11301131113211331134

32303231323232333234

35303531353235333534

38303831383238333834

41304131413241334134

68,00082,000

100,000100,000120,000

MKKMK


02350236023702380239

05350536053705380539

08350836083708380839

11351136113711381139

32353236323732383239

35353536353735383539

38353836383738383839

41354136413741384139

150.000150.000180.000220,000220,000

KMKKM



111319





MARKING

Military Type

Designation


Capacitance(pF)



1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S) 1.0 (M) 0.1 (P) 0.01 (R) 0.001 (S)

Style CKR24, Characteristic BX (Voltage-temperature limits of ±15% and +15%, -25%)CKR24BX274K_CKR24BX274K_CKR24BX334K_CKR24BX334M_CKR24BX394K_CKR24BX394M_

029402950296029702980299

059405950596059705980599

089408950896089708980899

119411951196119711981199

329432953296329732983299

359435953596359735983599

389438953896389738983899

419441954196419741984199

270000270000330000330000390000390000

KMKMKM

50

50

CKR24BX474K_CKR24BX474M_CKR24BX564K_CKR24BX564M_CKR24BX684K_CKR24BX684M

030003010302030303040305

060006010602060306040605

090009010902090309040905

120012011202120312041205

330033013302330333043305

360036013602360336043605

390039013902390339043905

420042014202420342044205

470000470000560000560000680000680000

KMKMKM

CKR24BX824K_CKR24BX824M_CKR24BX105K_CKR24BX105M_

0306030703080309

0606060706080609

0906090709080909

1206120712081209

3306330733083309

3606360736083609

3906390739083909

4206420742084209

820000820000

10000001000000

KMKM

Style CKR24, Characteristic BR (Voltage-temperature limits of ±15% and +15%, -40%)

CKR24BR124K_CKR24BR124M_CKR24BR154K_CKR24BR154M_CKR24BR184K

02400310024102420243

05400610054105420543

08400910084108420843

11401210114111421143

32403310324132423243

35403610354135423543

38403910384138423843

41404210414141424143

120000120000150000150000180000

KMKMK

10010010010050


03110244024502460312

06110544054505460612

09110844084508460912

12111144114511461212

33113244324532463312

36113544354535463612

39113844384538463912

42114144414541464212

180000220000220000270000270000

MKMKM

5050505050

CKR24BR334K_CKR24BR334M_CKR24BR394K_CKR24BR394M_CKR24BR474K_

02470248024903130250

05470548054906130550

08470848084909130850

11471148114912131150

32473248324933133250

35473548354936133550

38473848384939133850

41474148414942134150

330000330000390000390000470000

KMKMK

5050505050

CKR24BR474M_CKR24BR564K_CKR24BR684K_CKR24BR684M_CKR24BR824M_

02510252025302540255

05510552055305540555

08510852085308540855

11511152115311541155

32513252325332543255

35513552355335543555

38513852385338543855

41514152415341544155

470000560000680000680000820000

MKKMM

5050505050

CKR24BR105K_CKR24BR105M_

02560257

05560557

08560857

11561157

32563257

35563557

38563857

41564157

10000001000000

KM

5050


0001 A 810

Date Code (year and week)

Trademark

4-Digit Dash Number


111319




HOW TO ORDERMilitary Type Designation: Styles CK05, CK06

For values, tolerances, voltages, sizes, configurations and dielectrics not shown, contact KYOCERA AVX facilities directly for information.

CK05 BX K104









K = ±10%M = ±20%


Not RoHS Compliant


Second Letter

No Voltage

Rated Voltage

X +15, -15% +15, -25%

PACKAGINGCK05 1000 per bagCK06 1000 per bagRadial tape and reel packaging available upon request (2500 pcs./reel).


Case Size Per MIL Spec

MIL-C-11015 CK05 (Fig. 1) CK06 (Fig. 2)

Length (L) 4.83±.25(.190±.010)

7.37±.25(.290±.010)

Width (W) 4.83±.25(.190±.010)

7.37±.25(.290±.010)

Thickness (T) 2.29±.25(.090±.010)

2.29±.25(.090±.010)

LeadSpacing (L.S.)

5.08±.38(.200±.015)

5.08±.38(.200±.015)

LeadDiameter (L.D.)

.64±.05(.025±.002)

.64±.05(.025±.002)

MILITARYMIL-C-11015Radial Leads

111319




MILITARY PART NUMBER IDENTIFICATION CK05 AND CK06Military Type Designation

Capacitance (pF)


WVDC

CK05 (BX)CK05BX100_CK05BX120K_CK05BX150_CK05BX180K_CK05BX220

1012151822

K, MK

K, MK

K, M

200200200200200

CK05BX270K_CK05BX330_CK05BX390K_CK05BX470_CK05BX560K_

2733394756

KK, M

KK, M

K

200200200200200

CK05BX680_CK05BX820K_CK05BX101_CK05BX121K_CK05BX151

6882

100120150

K, MK

K, MK

K, M

200200200200200

CK05BX181K_CK05BX221_CK05BX271K_CK05BX331_CK05BX391K

180220270330390

KK, M

KK, M

K

200200200200200

CK05BX471_CK05BX561K_CK05BX681_CK05BX821K_CK05BX102

470560680820

1,000

K, MK

K, MK

K, M

200200200200200

CK05BX122_CK05BX152_CK05BX182K_CK05BX222_CK05BX272K_

1,2001,5001,8002,2002,700

KK, M

KK, M

K

100100100100100

CK05BX332_CK05BX392K_CK05BX472_CK05BX562K_CK05BX682_

3,3003,9004,7005,6006,800

K, MK

K, MK

K, M

100100100100100

CK05BX822K_CK05BX103CK05BX123KCK05BX153CK05BX183K_

8,20010,00012,00015.00018.000

KK, M

KK, M

K

100100505050

CK05BX223_CK05BX273K_CK05BX333_CK05BX393K_CK05BX473_

22,00027.00033.00039.00047.000

K, MK

K, MK

K, M

5050505050

CK05BX563K_CK05BX683_CK05BX823K_CK05BX104_

56.00068.000 82,000

100,000

KK, M

KK, M

50505050

Military Type Designation

Capacitance (pF)


WVDC

CK06 (BX)CK06BX122KCK06BX152CK06BX182KCK06BX222CK06BX272K_

1,2001,5001,8002,2002,700

KK, M

KK, M

K

200200200200200

CK06BX332CK06BX392KCK06BX472CK06BX562KCK06BX682_

3,3003,9004,7005,6006,800

K, MK

K, MK

K, M

200200200200200

CK06BX822KCK06BX103CK06BX123KCK06BX153CK06BX183K_

8,20010,00012,00015.00018.000

KK, M

KK, M

K

200200100100100

CK06BX223CK06BX273KCK06BX333_CK06BX393K_CK06BX473_

22,00027.00033.00039.00047.000

K, MK

K, MK

K, M

100100100100100

CK06BX563K_CK06BX683_CK06BX823KCK06BX104CK06BX124K_

56.00068.000 82,000

100,000120,000

KK, M

KK, M

K

10010010010050

CK06BX154CK06BX184KCK06BX224_CK06BX274K_CK06BX334_

150.000180.000 220,000270.000330.000

K, MK

K, MK

K, M

5050505050

CK06BX394K_CK06BX474_CK06BX564K_CK06BX684_CK06BX824K_

390.000470.000560.000680.000 820,000

KK, M

KK, M

K

5050505050

CK06BX105_ 1.0 mfd K, M 50

Add Capacitance Tolerance Letter K = ±10% or M = ±20%


MARKING

CK05BX

103K

100VAAAY0810

StyleTemperature CharacteristicCapacitance Value(3 digit code) and Capacitance Tolerance

Voltage RatingA for AVX; Plant I.D. (X); Lot Code (XX)Date Code

Front Back

CK05/CK06

MILITARYMIL-C-11015Radial Leads

111319




HOW TO ORDERMilitary Type Designation: Styles CK12, CK13, CK14, CK15, CK16

CK12 BX K103









K = ±10%M = ±20%


Not RoHS Compliant


Second Letter

No Voltage

Rated Voltage

R +15, -15% +15, -40%

X +15, -15% +15, -25%


Case Size Per MIL Spec

MIL-C-11015 CK12 CK13 CK14 CK15 CK16

Length (L) 4.07±.25(.160±.010)

6.35±.25(.250±.010)

9.91±.25(.390±.010)

12.7±.51(.500±.020)

17.53±.51(.690±.020)

Diameter (D) 2.29±.25(.090±.010)

2.29±.25(.090±.010)

3.56±.25(.140±.010)

6.35±.38(.250±.015)

8.89±.51(.350±.020)


.48±.05(.019±.002)

.48±.05(.019±.002)

.63±.05(.025±.002)

.63±.05(.025±.002)

.63±.05(.025±.002)

PACKAGING REQUIREMENTSPackaging: Bulk

CK12, 13 & 14 100 pcs per bagCK15 & 16 50 pcs per bagTape & ReelCK12, 13 5000 pcs per reelCK14 3000 pcs per reelCK15 950 pcs per reelCK16 650 pcs per reel

MILITARYMIL-C-11015Axial Leads

111319




MILITARY PART NUMBER IDENTIFICATION CK12 THRU CK16Military Type Designation

Capacitance (pF)


WVDC

CK12 (BX)CK12BX100_CK12BX120KCK12BX150_CK12BX180KCK12BX220_

1012151822

K, MK

K, MK

K, M

100100100100100

CK12BX270KCK12BX330_CK12BX390KCK12BX470_CK12BX560K

2733394756

KK, M

KK, M

K

100100100100100

CK12BX680_CK12BX820KCK12BX101_CK12BX121KCK12BX151_

6882

100120150

K, MK

K, MK

K, M

100100100100100


180220270330390

KK, M

KK, M

K

100100100100100


470560680820

1,000

K, MK

K, MK

K, M

100100100100100


1,2001,5001,8002,2002,700

KK, M

KK, M

K

100100100100100


3,3003,9004,7005,6006,800

K, MK

K, MK

K, M

1001001005050

CK12BX822KCK12BX103_

8,20010,000

KK, M

5050

CK13 (BX)CK13BX562KCK13BX682_CK13BX822KCK13BX103_CK13BX123K

5,6006,8008,200

10,00012,000

KK, M

KK, M

K

10010010010050

CK13BX153_CK13BX183KCK13BX223_

15.00018.000 22,000

K, MK

K, M

505050

CK13 (BR)CK13BR273KCK13BR333_CK13BR393KCK13BR473_

27.00033.00039.00047.000

KK, M

KK, M

50505050


Capacitance (pF)


WVDC

CK14 (BX)CK14BX123KCK14BX153_CK14BX183KCK14BX223_CK14BX273K

12,00015.00018.000 22,000 27,000

KK, M

KK, M

K

100100100100100

CK14BX333_CK14BX393KCK14BX473_

33.00039.00047.000

K, MK

K, M

100100100

CK14 (BR)CK14BR563KCK14BR683_CK14BR823KCK14BR104_CK14BR124K

56.00068.000 82,000

100,000120,000

KK, M

KK, M

K

10010010010050

CK14BR154_CK14BR184KCK14BR224_CK14BR274K

150.000180.000 220,000 270,000

K, MK

K, MK

50505050

CK15 (BX)CK15BX104K 100,000 K, M 100

CK15 (BR)CK15BR124KCK15BR154_CK15BR184KCK15BR224_CK15BR274K

120,000150.000180.000 220,000 270,000

KK, M

KK, M

K

100100100100100

CK15BR334_CK15BR474KCK15BR105_

330.000470.000

1,000,000

K, MK, MK, M

1005050

CK16 (BR)CK16BR474KCK16BR105_CK16BR225_CK16BR335_

470,0001,000,0002,200,0003,300,000

K, MK, MK, MK, M

1001005050



MARKING

StyleTemperature CharacteristicCapacitance Value(3 digit code) and Cap. ToleranceDate CodeMfg. I.D. Code

CK12BX

103K0810AVX

CK14BR104K0810AVX

Style and Temp. CharacteristicCapacitance Value and Cap. ToleranceDate CodeMfg. I.D. Code

CK12/CK13 CK14, CK15, CK16

MILITARYMIL-C-11015Axial Leads

111319




HOW TO ORDERMilitary Type Designation:Established Reliability = CCR05, CCR06, CCR07, CCR08, CCR09Non-Established Reliability = CC05, CC06, CC07, CC08, CC09


Per MIL Spec Case Size

MIL-PRF-20 Length (L)

Width (W)

Thickness (T)

Lead Spacing

(L.S.)

Lead Diameter

(L.D.)CCR05/CC05Figures 1, 4

4.83±.25(.190±.010)

4.83±.25(.190±.010)

2.29±.25(.090±.010)

5.08±.38(.200±.015)

.64±.05(.025±.002)

CCR06/CC06Figures 2, 3

7.37±.25(.290±.010)

7.37±.25(.290±.010)

2.29±.25(.090±.010)

5.08±.38(.200±.015)

.64±.05(.025±.002)

CCR07/CC07Figure 2

12.19±.51(.480±.020)

12.19±.51(.480±.020)

3.56±.25(.140±.010)

10.16±.51(.400±.020)

.64±.05(.025±.002)

CCR08/CC08Figure 2

12.19±.51(.480±.020)

12.19±.51(.480±.020)

6.1±.25(.240±.010)

10.16±.51(.400±.020)

.64±.05(.025±.002)

CCR09/CC09Figure 2

4.83±.25(.190±.010)

4.83±.25(.190±.010)

2.29±.25(.090±.010)

2.54±.38(.100±.015)

.64±.05(.025±.002)

PACKAGING REQUIREMENTSPackaging: CCR0X: 100 pcs/bag; CC0X: 1000 pcs/bag

CCR06 CG J183

Style CC = Identifies temperature

compensating, ceramic dielectric, fixed capacitors.

R = Identifies Established Reliability parts

06 = Numbers identify shape and dimension

Temperature Characteristic


C = ±0.25pFD = ±0.5pFF = ±1%G = ±2%J = ±5%K = ±10%


Not RoHS Compliant

Permissible capacitance change from capacitance at

+25°C in ppm/°C

Characteristic Temp.CX 1/ +125ºC

1/ -55°C 2/CK ±250 ppm/°C +125ºC

+246.25, -326.25 -55°C 2/CJ ±120 ppm/°C +125ºC

+116.25, -166.25 -55°C 2/CH ±60 ppm/°C +125ºC

+55.00, -91.25 -55°C 2/CG ±30 ppm/ºC +125ºC

+27.50, -53.75 -55°C 2/

1/ Not practically measurable.

2/ The ppm/°C values for -55°C were calculated by dividing ppm by negative 80°C.

(V)R

Standoff Option

To order standoff option, place “V” at the end of the part

number.Example:

CCR05CG332FSV




111319




MILITARY PART NUMBER IDENTIFICATIONMilitary Type Designation

Capacitance (pF)


CC05-CCR05, CC09-CCR09CCR05CX1R0_CCR05CX1R1_CCR05CX1R2_CCR05CX1R3_CCR05CX1R5_

1.01.11.21.31.5

B, CB, CB, CB, CB, C

200200200200200

CCR05CX1R6_CCR05CX1R8_CCR05CX2R0_CCR05CK2R2_CCR05CK2R4_

1.61.82.02.22.4

B, CB, CB, CB, CB, C

200200200200200

CCR05CK2R7_CCR05CK3R0_CCR05CK3R3_CCR05CK3R6_CCR05CK3R9_

2.73.03.33.63.9

B, C, DB, C, DB, C, DB, C, DB, C, D

200200200200200

CCR05CJ4R3_CCR05CJ4R7_CCR05CJ5R1_CCR05CJ5R6_CCR05CJ6R2_

4.34.75.15.66.2

B, C, DB, C, DB, C, DB, C, DB, C, D

200200200200200

CCR05CJ6R8_CCR05CJ7R5_CCR05CH8R2_CCR05CH9R1_CCR05CH100_

6.87.58.29.110

B, C, DB, C, DB, C, DB, C, DF, G, J

200200200200200

CCR05CH110_CCR05CH120_CCR05CH130_CCR05CH150_CCR05CH160_

1112131516

F, G, JF, G, JF, G, JF, G, JF, G, J

200200200200200

CCR05CH180_CCR05CG200_CCR05CG220_CCR05CG240_CCR05CG270_

1820222427


200200200200200

CCR05CG300_CCR05CG330_CCR05CG360_CCR05CG390_CCR05CG430_

3033363943


200200200200200


4751566268


200200200200200


758291

100110


200200200200200


120130150160180


200200200200200


200220240270300


200200200200200


330360390430470


200100100100100


510560620680750


100100100100100


820910

1,0001,1001,200


100100100100100

CCR05CG132_CCR05CG152_CCR05CG162_CCR05CG182_CCR05CG202

1,3001,5001,6001,8002,000


10010010010050


Capacitance (pF)


WVDC

CC05-CCR05, CC09-CCR09 (cont)


2,2002,4002,7003,0003,300


5050505050

CC06, CCR06CCR06CG361_CCR06CG391_CCR06CG431_CCR06CG471_CCR06CG511_

360390430470510


200200200200200


560620680750820


200200200200200


9101,0001,1001,2001,300


200200200200200


1,5001,6001,8002,0002,200


200200200100100


2,4002,7003,0003,3003,600


100100100100100


3,9004,3004,7005,1005,600

F, G, JF, G, JF, G, J

F, G, J, KF, G, J, K

1001001005050


6,2006,8007,5008,2009,100

F, G, J, KF, G, J, KF, G, J, KF, G, J, KF, G, J, K

5050505050

CCR06CG103_CCR06CG123_CCR06CG153_CCR06CG183_

10,00012,00015.00018.000

F, G, J, KF, G, J, KF, G, J, KF, G, J, K

50505050


2,2002.7003,3003,9004.700


200200200200200


5,6006,8008,200

10,00012,000


100100100100100


15.00018.00022,00027.00033.000


5050505050


39.00047.00056.00068.00082,000


5050505050

CCR07CG104_ 100,000 F, G, J, K 50


3,9004,700

15.00018.00056,000

G, J, KG, J, KG, J, KG, J, KG, J, K

20020010010050

CCR08CG683_ 68,000 G, J, K 50

Add appropriate failure rate level (M, P, R or S)Add appropriate cap. tolerance letter


Note: For marking information, see page 73.


111319




HOW TO ORDERMilitary Type Designation:Established Reliability = CCR75, CCR76, CCR77, CCR78, CCR79Non-Established Reliability = CC75, CC76, CC77, CC78, CC79

CCR76 CG K102

Style CC = Identifies temperature

compensating, ceramic dielectric, fixed capacitors.

R = Identifies Established Reliability parts

76 = Numbers identify shape and dimension



C = ±0.25pFD = ±0.5pFF = ±1%G = ±2%J = ±5%K = ±10%


Not RoHS Compliant

Permissible capacitance change from capacitance at

+25°C in ppm/°C

Characteristic Temp.CX 1/ +125ºC

1/ -55°C 2/CK ±250 ppm/°C +125ºC

+246.25, -326.25 -55°C 2/CJ ±120 ppm/°C +125ºC

+116.25, -166.25 -55°C 2/CH ±60 ppm/°C +125ºC

+55.00, -91.25 -55°C 2/CG ±30 ppm/ºC +125ºC

+27.50, -53.75 -55°C 2/


Per MIL Spec Case Size

MIL-PRF-20Length

(L)Diameter

(D)Lead Diameter

(L.D.)

CCR75CC75

4.07±.25(.160±.010)

2.29±.25(.090±.010)

.48±.05(.019±.002)

CCR76CC76

6.35±.25(.250±.010)

2.29±.25(.090±.010)

.48±.05(.019±.002)

CCR77CC77

9.91±.25(.390±.010)

3.56±.25(.140±.010)

.63±.05(.025±.002)

CCR78CC78

12.7±.51(.500±.020)

6.35±.38(.250±.015)

.63±.05(.025±.002)

CCR79CC79

17.53±.51(.690±.020)

8.89±.51(.350±.020)

.63±.05(.025±.002)

PACKAGING REQUIREMENTSPackaging:Bulk

CCR75/CC75, CCR76/CC76, CCR77/CC77, 100 pcs/bagCCR78/CC78, CCR79/CC79 50 pcs/bag

Tape & ReelCCR75/CC75, CCR76/CC76 5000 pcs/reelCCR77/CC77 3000 pcs/reelCCR78/CC78 950 pcs/reelCCR79/CC79 650 pcs/reel

1/ Not practically measurable.

2/ The ppm/°C values for -55°C were calculated by dividing ppm by negative 80°C.

R




111319




MILITARY PART NUMBER IDENTIFICATION CC75 THRU CC79 AND CCR75 THRU CCR79


Capacitance (pF)


CC75-CCR75CCR75CX1R0_CCR75CX1R1_CCR75CX1R2_CCR75CX1R3_CCR75CX1R5_

1.01.11.21.31.5

CCCCC

200200200200200

CCR75CX1R6_CCR75CX1R8_CCR75CX2R0_CCR75CK2R2_CCR75CK2R4_

1.61.82.02.22.4

CCCCC

200200200200200

CCR75CK2R7_CCR75CK3R0_CCR75CK3R3_CCR75CK3R6_CCR75CK3R9_

2.73.03.33.63.9

C, DC, DC, DC, DC, D

200200200200200

CCR75CJ4R3_CCR75CJ4R7_CCR75CJ5R1_CCR75CJ5R6_CCR75CJ6R2_CCR75CJ6R8_

4.34.75.15.66.26.8

C, DC, DC, DC, DC, DC, D

200200200200200200

CCR75CJ7R5_CCR75CH8R2_CCR75CH9R1_CCR75CH100_CCR75CH110

7.58.29.11011

C, DC, DC, DG, JG, J

200200200200200

CCR75CH120_CCR75CH130_CCR75CH150_CCR75CH160_CCR75CH180_

12131516 18

G, JG, JG, JG, JG, J

200200200200200


2022242730


200200200200200


Capacitance (pF)


CC75-CCR75CCR75CG330_CCR75CG360_CCR75CG390_CCR75CG430_CCR75CG470_

3336394347


200200200200200


5156626875


200200200200200


8291

100110120


100100100100100


130150160180200


100100100100100


220240270300330


100100505050


360390430470510


5050505050

CCR75CG561_CCR75CG621_CCR75CG681_

560620680

F, G, JF, G, JF, G, J

505050





111319




MILITARY PART NUMBER IDENTIFICATION CC75 THRU CC79 AND CCR75 THRU CCR79


Capacitance (pF)



8291

100110120


200200200200200


130270300330360


200100100100100


390430470510560


100100100100100


620680750820910


100100505050

CCR76CG102_ 1,000 F, G, J 50CC77, CCR77


150160180200220


200200200200200


240270300330360


200200200200200

CCR77CG391_CCR77CG431_CCR77CG471_CCR77CG511_CCR77CG561_CCR77CG621_

390430470510560620

F, G, JF, G, JF, G, JF, G, JF, G, JF, G, J

200200200200200200


680750820910

1,000


200100100100100


1,1001,2001,3001,5001,600


100100100100100


1,8002,0002,2002,4002,700


1001001005050


Capacitance (pF)


CC77, CCR77 (cont)CCR77CG302_CCR77CG332_CCR77CG362_CCR77CG392_CCR77CG432_

3,0003.3003,6003,9004.300


5050505050

CCR77CG472_CCR77CG512_CCR77CG562_

4,7005,1005,600

F, G, JF, G, J, KF, G, J, K

505050


8201,0001,2001,5001,800


200200200200200


2,2002.7003,3003,9004.700


200200200100100


5,6006,8008,200

10,00012,000


100100100100100

CCR78CG153_CCR78CG183_CCR78CG223_CCR78CG273_

15.00018.00022,00027,000

F, G, J, KF, G, J, KF, G, J, KF, G, J, K

50505050


3,9004,7005,6006,8008,200


200200200200200


10,00015.00018.00022,00027,000


200100100100100


33.00039.00047.00056.00068.000


100100505050

CCR79CG823_ 82,000 F, G, J, K 50



Note: Complete type designation will include the appropriate capacitance tolerance in the 11th digit. For CC styles, delete 3rd and 12th digits.



111319




MARKING

CC05CH

100G

FRONT

0810A0

4222

BACK

67CC ,57CC90CC & 50CCDate CodeA=Lot Letter0=1st Digit of AVX FSCM #4222=Last four digits of AVX FSCM #

CCR05CH100GM

FRONT

0810AJ04222

BACK

CCR05 & CCR09Date CodeA=Lot LetterJ=“J” or “JAN” Brand0=1st Digit of AVX FSCM #4222=Last four digits of AVX FSCM #

CC06CG

102F

FRONT

0810A200V04222

BACK

CC06Date Code & Lot Letter200V=Rated Voltage04222=AVX FSCM #

CCR06CG102

FM

CG103G8

AAVX

CharacteristicCapacitance ValueCap. Tolerance & Year Code (8 for 2008)Lot Code & Trademark

CG101G08

10AAA

CharacteristicCapacitance ValueCap. Tolerance & 2 digit Year Code 2 digit Week, 2 digit Lot Code, A for AVX

FRONT

0810AJ200V04222

BACK

CCR06

CC07

JCG103GM8AAVX

“J” Brand (J) and Characteristic (CG)Capacitance ValueCap. Tolerance (G) FR Level (M), & Year Code (8 for 2008)Lot Code (A); and Trademark (AVX)

“J” Brand (J) and Characteristic (CG)Capacitance ValueCap. Tolerance (G) FR Level (M), & 2 digit Year Code 2 digit Week, A for AVX

CCR07

CC08CG392KAVX

96095200V 0810A

Trademark or Manufacturer’s NameSource Code (FSCM)Voltage, Date Code and Lot Symbol

CC08

CCR08CG392KM

JAN AVX96095

200V 0810A

“JAN” Brand & Trademark or Manufacturer’s NameSource Code (FSCM)Voltage, Date Code and Lot Symbol

CCR08

Date Code & Lot LetterJ=“J” or “JAN” Brand200V=Rated Voltage04222=AVX FSCM #

CCR75, CCR76

JCG101

GM0810AAA

CC77

CC77CG151F04222

0810AA

Type Designation

FSCM4 digit Date Code, 2 digit Lot Code

Type Designation

“J” Brand and FSCM4 digit Date Code, 2 digit Lot Code

CCR77

CCR77CG151FMJO42220810AA

Type Designation

Trademark or Manufacturer’s NameSource Code (FSCM) Voltage4 digit Date Code

CC78, CC79

CC78CG821KAVX

04222200V

0810AA

Type Designation TCCapacitance Tolerance, Failure Rate“JAN” Brand, A for AVXFSCMVoltage4 digit Date Code, 2 digit Lot Code

CCR78, CCR79

CCR78CG

821KMJAN A04222200V

0810AA

Radials Axials

MILITARYMIL-PRF-20Marking

111319




HOW TO ORDERMilitary Type Designation: Capacitors, Fixed, Ceramic Dielectric,(Temperature Stable and General Purpose), High Reliability

M123 BX 103A 01 KB

Mil-Spec Number


Capacitance Code

Modification Spec.

Slash Sheet Number


C = ±0.25pFD = ±0.5pFF = ±1%J = ±5%K = ±10%

VoltageB = 50

C = 100

Not RoHS Compliant

Capacitance change with reference to 25ºC over temperature

range -55ºC to +125ºCSymbol Without

VoltageWith Rated DC Voltage

BP 0 ± 30 ppm/ºC 0 ±30 ppm/ºC

BX ±15, -15% ±15, -25%

C

TerminationC = Copper, solder

coated (type C-4 or C-5 of MIL-STD-1276)

W = Copper clad steel, solder coated, 60 micro inches minimum.

CROSS REFERENCE MIL-SPEC TEST REQUIREMENTSTEST DESCRIPTION MIL-PRF-123 MIL-PRF-39014 MIL-PRF-20 MIL-PRF-55681

NDT (Non-Destructive Test)

100% Ultrasonic Scan or Neutron-Radiography No No No

Pre-Cap Visual (Pre-Encapsulation Visual Examination)

100% No No No

D.P.A. (Destructive Physical Analysis)

Lot by Lot—Pre-Termination Lot by Lot—Finished Product No No No

Pre-Cap Terminal Strength (Pre-Encapsulation Pull Test)

Lot by Lot No No No

Life Test (Lot by Lot) Lot by Lot—1000 Hours No No No

Low Voltage Humidity (Lot by Lot) Lot by Lot No No No

Thermal Shock 100 Cycles (Lot by Lot) Lot by Lot No No No

MILITARYMIL-PRF-123How to Order / Cross Reference

111319




MIL-PRF-123/STYLE CKS05, -/01


Part Number 1/Capacitance

pFCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A01BPC4R7_C 4.7 C, D BP 100M123A01BPC5R1_C 5.1M123A01BPC5R6_C 5.6M123A01BPC6R2_C 6.2M123A01BPC6R8_C 6.8M123A01BPC7R5_C 7.5M123A01BPC8R2_C 8.2M123A01BPC9R1_C 9.1 C, DM123A01BPC100_C 10 C, J, KM123A01BPC110_C 11M123A01BPC120_C 12M123A01BPC130_C 13M123A01BPC150_C 15M123A01BPC160_C 16M123A01BPC180_C 18 C, J, K BP 100M123A01BP_200_C 20 C, J, K BP 100, 200M123A01BP_220_C 22 C, J, KM123A01BP_240_C 24 C, J, KM123A01BP_270_C 27 F, J, KM123A01BP_300_C 30M123A01BP_330_C 33M123A01BP_360_C 36M123A01BP_390_C 39M123A01BP_430_C 43M123A01BP_470_C 47M123A01BP_510C 51M123A01BP_560_C 56M123A01BP_620_C 62M123A01BP_680_C 68M123A01BP_750_C 75M123A01BP_820_C 82M123A01BP_910_C 91M123A01BP_101_C 100M123A01BP_111_C 110M123A01BP_121_C 120M123A01BP_131_C 130M123A01BP_151_C 150M123A01BP_161_C 160M123A01BP_181_C 180M123A01BP_201_C 200M123A01BP_221_C 220M123A01BP_241_C 240 F, J, K BP 100, 200

M123A01BP_271_C 270 F, J, K BP 50,100,200M123A01BP_301_C 300 F, J, K BP 50,100,200M123A01BP_331_C 330 F, J, K BP 50,100,200

M123A01BP_361_C 360 F, J, K BP 50,100M123A01BP_391_C 390M123A01BP_431_C 430M123A01BP_471_C 470M123A01BP_511_C 510M123A01BP_561_C 560M123A01BP_621_C 620M123A01BP_681_C 680M123A01BP_751_C 750M123A01BP_821_C 820M123A01BP_911_C 910M123A01BP_102_C 1,000M123A01BP_112_C 1,100M123A01BP_122_C 1,200M123A01BP_132_C 1,300M123A01BP_152_C 1,500M123A01BP_162_C 1,600M123A01BP_182_C 1,800 F, J, K BP 50,100

M123A01BPB202_C 2,000 F, J, K BP 50M123A01BPB222_C 2,200M123A01BPB242_C 2,400M123A01BPB272_C 2,700M123A01BPB302_C 3,000M123A01BPB332_C 3,300 F, J, K BP 50

M123A01BXC271KC 270 K BX 100M123A01BXC331KC 330M123A01BXC391KC 390M123A01BXC471KC 470M123A01BXC561KC 560M123A01BXC681KC 680M123A01BXC821KC 820M123A01BXC102KC 1,000M123A01BXC122KC 1,200M123A01BXC152KC 1,500M123A01BXC182KC 1,800M123A01BXC222KC 2,200M123A01BXC272KC 2,700M123A01BXC332KC 3,300M123A01BXC392KC 3,900M123A01BXC472KC 4,700 K BX 100

M123A01BXB562KC 5,600 K BX 50M123A01BXB682KC 6,800M123A01BXB822KC 8,200M123A01BXB103KC 10,000 K BX 50


pFCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A02BPC271_C 270 F, J, K BP 100M123A02BPC301_C 300 F, J, K BP 100M123A02BPC331_C 330 F, J, K BP 100

M123A02BP_361_C 360 F, J, K BP 100, 200M123A02BP_391_C 390M123A02BP_431_C 430M123A02BP_471_C 470M123A02BP_511_C 510

M123A02BP_561_C 560M123A02BP_621_C 620M123A02BP_681_C 680M123A02BP_751_C 750M123A02BP_821_C 820

M123A02BP_911_C 910M123A02BP_102_C 1,000M123A02BP_112C 1,100M123A02BP_122_C 1,200M123A02BP_132_C 1,300

M123A02BP_152_C 1,500M123A02BP_162_C 1,600M123A02BP_182_C 1,800 F, J, K BP 100, 200

M123A02BPC202_C 2,000 F, J, K BP 100M123A02BPC222_C 2,200 F, J, K BP 100M123A02BPC242_C 2,400 F, J, K BP 100

M123A02BP_272_C 2,700 F, J, K BP 50, 100M123A02BP_302_C 3,000M123A02BP_332_C 3,300M123A02BP_362_C 3,600M123A02BP_392_C 3,900M123A02BP_432_C 4,300M123A02BP_472_C 4,700 F, J, K BP 50, 100

M123A02BPB512_C 5,100 F, J, K BP 50M123A02BPB562_C 5,600M123A02BPB622_C 6,200M123A02BPB682_C 6,800M123A02BPB752_C 7,500M123A02BPB822_C 8,200M123A02BPB912_C 9,100M123A02BPB103_C 10,000M123A02BPB123_C 12,000M123A02BPB153_C 15,000M123A02BPB183_C 18,000 F, J, K BP 50

M123A02BXC562KC 5,600 K BX 100M123A02BXC682KC 6,800M123A02BXC822KC 8,200M123A02BXC103KC 10,000M123A02BXC123KC 12,000M123A02BXC153KC 15,000M123A02BXC183KC 18,000M123A02BXC223KC 22,000M123A02BXC273KC 27,000M123A02BXC333KC 33,000M123A02BXC393KC 39,000M123A02BXC473KC 47,000 K BX 100

M123A02BX_563KC 56,000 K BX 50, 100M123A02BX_683KC 68,000M123A02BX_823KC 82,000M123A02BX_104KC 100,000 K BX 50, 100

CKS05

CKS06


111319





pFCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A02BXB124KC 120,000 K BX 50M123A02BXB154KC 150,000M123A02BXB184KC 180,000M123A02BXB224KC 220,000M123A02BXB274KC 270,000M123A02BXB334KC 330,000M123A02BXB394KC 390,000M123A02BXB474KC 470,000M123A02BXB564KC 560,000M123A02BXB684KC 680,000M123A02BXB824KC 820,000M123A02BXB105KC 1,000,000 K BX 50


pFCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A04BPC4R7-W 4.7 C,D BP 100M123A04BPC5R1-W 5.1 C,D BP 100M123A04BPC6R2-W 6.2 C,D BP 100M123A04BPC6R8-W 6.8 C,D BP 100M123A04BPC7R5-W 7.5 C,D BP 100M123A04BPC8R2-W 8.2 C,D BP 100M123A04BPC9R1-W 9.1 C,D BP 100M123A04BPC100-W 10 C,J, K BP 100M123A04BPC110-W 11 C,J, K BP 100M123A04BPC120-W 12 C,J, K BP 100M123A04BPC130-W 13 C,J, K BP 100M123A04BPC150-W 15 C,J, K BP 100M123A04BPC160-W 16 C,J, K BP 100M123A04BPC180-W 18 C,J, K BP 100M123A04BPC200-W 20 C,J, K BP 100M123A04BPC220-W 22 C,J, K BP 100M123A04BPC240-W 24 C,J, K BP 100M123A04BPC270-W 27 F, J, K BP 100M123A04BPC300-W 30 F, J, K BP 100M123A04BPC330-W 33 F, J, K BP 100M123A04BPC360-W 36 F, J, K BP 100M123A04BPC390-W 39 F, J, K BP 100M123A04BPC430-W 43 F, J, K BP 100M123A04BPC4 70-W 47 F., J, K BP 100M123A04BPC510-W 51 F, J, K BP 100M123A04BPC560-W 56 F, J, K BP 100M123A04BPC620-W 62 F, J, K BP 100M123A04BPC680-W 68 F., J, K BP 100M123A04BPC750-W 75 F, J, K BP 100M123A04BPC820-W 82 F, J, K BP 100M123A04BPC910-W 91 F, J, K BP 100M123A04BPC101-W 100 F, J, K BP 100

MIL-PRF-123/STYLE CKS06, -/02(CONTINUED)




080317




MIL-PRF-123/STYLE CKS12, -/05MIL-PRF-123/STYLE CKS14, -/06


pFCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A05BPD820_W 82 F, J, K BP 200M123A05BPD910_W 91 F, J, K BP 200M123A05BPD101_W 100 F, J, K BP 200

M123A05BP_111_W 110 F, J, K BP 100, 200M123A05BP_121_W 120 F, J, K BP 100, 200M123A05BP_131_W 130 F, J, K BP 100, 200

M123A05BPC151_W 150 F, J, K BP 100M123A05BPC161_W 160M123A05BPC181_W 180M123A05BPC201_W 200M123A05BPC221_W 220 F, J, K BP 100

M123A05BPB241_W 240 F, J, K BP 50

M123A05BP_271_W 270 F, J, K BP 50, 100M123A05BP_301_W 300M123A05BP_331_W 330M123A05BP_361_W 360M123A05BP_391_W 390M123A05BP_431_W 430M123A05BP_471_W 470 F, J, K BP 50, 100

M123A05BPC511_W 510 F, J, K BP 100M123A05BPC561_W 560M123A05BPC621_W 620M123A05BPC681_W 680 F, J, K BP 100

M123A05BPB751_W 750 F, J, K BP 50M123A05BPB821_W 820M123A05BPB911_W 910M123A05BPB102_W 1000 F, J, K BP 50

M123A05BXC122KW 1,200 K BX 100M123A05BXC152KW 1,500M123A05BXC182KW 1,800M123A05BXC222KW 2,200M123A05BXC272KW 2,700M123A05BXC332KW 3,300M123A05BXC392KW 3,900M123A05BXC472KW 4,700 K BX 100

M123A05BXB562KW 5,600 K BX 50M123A05BXB682KW 6,800M123A05BXB822KW 8,200M123A05BXB103KW 10,000 K BX 50


pFCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A06BPD151_W 150 F, J, K BP 200M123A06BPD161_W 160M123A06BPD181_W 180M123A06BPD201_W 200M123A06BPD221_W 220 F, J, K BP 200

M123A06BP_241_W 240 F, J, K BP 100, 200M123A06BP_271_W 270M123A06BP_301_W 300M123A06BP_331_W 330M123A06BP_361_W 360M123A06BP_391_W 390M123A06BP_431_W 430M123A06BP_471_W 470M123A06BP_511_W 510M123A06BP_561_W 560M123A06BP_621_W 620M123A06BP_681_W 680 F, J, K BP 100, 200

M123A06BPC751_W 750 F, J, K BP 100M123A06BPC821_W 820M123A06BPC911_W 910M123A06BPC102_W 1,000 F, J, K BP 100

M123A06BP_112_W 1,100 F, J, K BP 50, 100M123A06BP_122_W 1,200M123A06BP_132_W 1,300M123A06BP_152_W 1,500M123A06BP_162_W 1,600M123A06BP_182_W 1,800M123A06BP_202_W 2,000M123A06BP_222_W 2,200 F, J, K BP 50, 100

M123A06BPB242_W 2,400 F, J, K BP 50M123A06BPB272_W 2,700M123A06BPB302_W 3,000M123A06BPB332_W 3,300M123A06BPB362_W 3,600M123A06BPB392_W 3,900M123A06BPB432_W 4,300M123A06BPB472_W 4,700M123A06BPB512_W 5,100M123A06BPB562_W 5,600M123A06BPB622_W 6,200M123A06BPB682_W 6,800 F, J, K BP 50

M123A06BXC562KW 5,600 K BX 100M123A06BXC682KW 6,800M123A06BXC822KW 8,200M123A06BXC103KW 10,000 K BX 100M123A06BXB123KW 12,000 K BX 50M123A06BXB153KW 15,000M123A06BXB183KW 18,000M123A06BXB223KW 22,000M123A06BXB273KW 27,000M123A06BXB333KW 33,000M123A06BXB393KW 39,000M123A06BXB473KW 47,000 K BX 50


111319




MIL-PRF-123/STYLE CKS15, -/07 MIL-PRF-123/STYLE CKS16, -/08Part Number 1/

Capacitance pF


Voltage-Temperature

Limits

Rated Voltage

M123A07BPD821_W 820 F, J, K BP 200M123A07BPD102_W 1000 F, J, K BP 200

M123A07BP_112_W 1,100 F, J, K BP 100, 200M123A07BP_122_W 1,200M123A07BP_132_W 1,300M123A07BP_152_W 1,500M123A07BP_162_W 1,600M123A07BP_182_W 1,800M123A07BP_202_W 2,000M123A07BP_222_W 2,200 F, J, K BP 100, 200

M123A07BP_242_W 2,400 F, J, K BP 50, 200M123A07BP_272_W 2,700M123A07BP_302_W 3,000M123A07BP_332_W 3,300 F, J, K BP 50, 200

M123A07BPB362_W 3,600 F, J, K BP 50

M123A07BP_392_W 3,900 F, J, K BP 50, 100M123A07BP_432_W 4,300M123A07BP_472_W 4,700M123A07BP_512_W 5,100M123A07BP_562_W 5,600M123A07BP_622_W 6,200M123A07BP_682_W 6,800M123A07BP_752_W 7,500M123A07BP_822_W 8,200M123A07BP_912_W 9,100M123A07BP_103_W 10,000M123A07BP_113_W 11,000M123A07BP_123_W 12,000 F, J, K BP 50, 100M123A07BPB133_W 13,000 F, J, K BP 50M123A07BPB153_W 15,000M123A07BPB163_W 16,000M123A07BPB183_W 18,000M123A07BPB203_W 20,000M123A07BPB223_W 22,000M123A07BPB273_W 27,000 F, J, K BP 50

M123A07BXC123KW 12,000 K BX 100M123A07BXC153KW 15,000M123A07BXC183KW 18,000M123A07BXC223KW 22,000M123A07BXC273KW 27,000M123A07BXC333KW 33,000M123A07BXC393KW 39,000M123A07BXC473KW 47,000M123A07BXC563KW 56,000M123A07BXC683KW 68,000M123A07BXC823KW 82,000M123A07BXC104KW 100,000 K BX 100

M123A07BXB124KW 120,000 K BX 50M123A07BXB154KW 150,000 K BX 50M123A07BXB184KW 180,000 K BX 50


pFCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A08BPC242_W 2,400 F, J, K BP 100M123A08BPC272_W 2,700M123A08BPC302_W 3,000M123A08BPC332_W 3,300M123A08BPC362_W 3,600 F, J, K BP 100

M123A08BP_392_W 3,900 F, J, K BP 100, 200M123A08BP_432_W 4,300M123A08BP_472_W 4,700M123A08BP_512_W 5,100M123A08BP_562_W 5,600M123A08BP_622_W 6,200M123A08BP_682_W 6,800M123A08BP_822_W 8,200M123A08BP_912_W 9,100M123A08BP_103_W 10,000 F, J, K BP 100, 200

M123A08BPB113_W 11,000 F, J, K BP 50M123A08BPB123_W 12,000 F, J, K BP 50M123A08BPB133_W 13,000 F, J, K BP 50

M123A08BP_153_W 15,000 F, J, K BP 50, 100M123A08BP_163_W 16,000M123A08BP_183_W 18,000M123A08BP_203_W 20,000M123A08BP_223_W 22,000 F, J, K BP 50, 100

M123A08BPC273_W 27,000 F, J, K BP 100M123A08BPC333_W 33,000 F, J, K BP 100M123A08BPC393_W 39,000 F, J, K BP 100

M123A08BPB473_W 47,000 F, J, K BP 50M123A08BPB563_W 56,000M123A08BPB683_W 68,000M123A08BPB823_W 82,000 F, J, K BP 50

M123A08BXC124KW 120,000 K BX 100M123A08BXC154KW 150,000M123A08BXC184KW 180,000M123A08BXC224KW 220,000M123A08BXC274KW 270,000M123A08BXC334KW 330,000M123A08BXC394KW 390,000M123A08BXC474KW 470,000 K BX 100

M123A08BXB564KW 560,000 K BX 50M123A08BXB684KW 680,000M123A08BXB824KW 820,000M123A08BXB105KW 1,000,000 K BX 50


111319





pfCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A16BPD1R0DC 1.0 D BP 200M123A16BPD1R2DC 1.2M123A16BPD1R5DC 1.5M123A16BPD1R8DC 1.8M123A16BPD2R2DC 2.2M123A16BPD2R7DC 2.7M123A16BPD3R3DC 3.3M123A16BPD3R9DC 3.9M123A16BPD4R7DC 4.7M123A16BPD5R6DC 5.6M123A16BPD6R8DC 6.8M123A16BPD8R2DC 8.2M123A16BPD100_C 10 D, J, KM123A16BPD120_C 12M123A16BPD150_C 15

M123A16BPD180_C 18M123A16BPD220_C 22M123A16BPD270_C 27M123A16BPD330_C 33M123A16BPD390_C 39M123A16BPD470_C_ 47M123A16BPD560_C 56M123A16BPD680_C 68 F, J, KM123A16BPD820_C 82M123A16BPD101_C 100M123A16BPD121_C 120M123A16BPD151_C 150M123A16BPD181_C 180M123A16BPD221_C 220M123A16BPD271_C 270M123A16BPD331_C_ 330M123A16BPD391_C 390M123A16BPD471_C 470 F, J, K BP 200

M123A16BPC561_C 560 F, J, K BP 100M123A16BPC681_C 680M123A16BPC821_C 820M123A16BPC102_C 1000M123A16BPC122_C 1200M123A16BPC152_C_ 1500M123A16BPC182_C 1800M123A16BPC222_C 2200 F, J, K BP 100M123A16BPB272_C 2700 F, J, K BP 50M123A16BPB332_C 3300M123A16BPB392_C 3900M123A16BPB472_C 4700 F, J, K BP 50M123A16BXD271KC 270 K BX 200M123A16BXD331_C 330 K, MM123A16BXD391KC 390 KM123A16BXD471_C 470 K, MM123A16BXD561KC 560 K

M123A16BXD681_C 680 K, MM123A16BXD821KC 820 K BX 200M123A16BXC102_C 1000 K, M BX 100M123A16BXC122KC 1200 KM123A16BXC152_C 1500 K, MM123A16BXC182KC 1800 KM123A16BXC222_C 2200 K, M BX 100


pfCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A17BXC333_C 33000 K, M BX 100M123A17BXC393KC 39000 KM123A17BXC473_C 47000 K, MM123A17BXC563KC 56000 KM123A17BXC683_C 68000 K, M KM123A17BXC823KC 82000M123A17BXC104_C 100000 K, M BX 100M123A17BXB124KC 120000 K BX 50M123A17BXB154_C 150000 K, MM123A17BXB184KC 180000 KM123A17BXB224_C 220000 K, M BX 50


pfCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A18BRC124KC 120,000 K, M BR 100M123A18BRC154_C 150,000 K, M BR 100

M123A18BRB184KC 180,000 K, M BR 50M123A18BRB224_C 220,000 K, M BR 50M123A18B-B274_C 270,000 K, M BX, BR 50M123A18B-B334_C 330,000M123A18B-B394_C 390,000M123A18B-B474_C 470,000 K, M BX, BR 50M123A18BXB564_C 560,000 K, M BX 50M123A18BXB684_C 680,000M123A18BXB824_C 820,000M123A18BXB105_C 1,000,000 K, M BX 50




pfCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A17BPD561_C 560 F, J, K BP 200M123A17BPD681_C 680M123A17BPD821_C 820M123A17BPD102_C 1000M123A17BPD122_C 1200 F, J, K BP 200M123A17BPC272_C 2700 F, J, K BP 100M123A17BPC332_C 3300 F, J, K BP 100M123A17BPB472_C 4700 F, J, K BP 50M123A17BPB562_C 5600M123A17BPB682_C 6800M123A17BPB822_C 8200M123A17BPB103_C 10000 F, J, K BP 50

M123A17BXD102_C 1000 K, M BX 200M123A17BXD122KC 1200 KM123A17BXD152_C 1500 K, MM123A17BXD182KC 1800 KM123A17BXD222_C 2200 K, M

M123A17BXD272KC 2700 KM123A17BXD332_C 3300 K, MM123A17BXD392KC 3900 KM123A17BXD472_C 4700 K, MM123A17BXD562KC 5600 KM123A17BXD682_C 6800 K, MM123A17BXD822KC 8200 KM123A17BXD103_C 10000 K, M BX 200M123A17BXC123KC 12000 K BX 100M123A17BXC153_C 15000 K, MM123A17BXC183KC 18000 KM123A17BXC223_C 22000 K, MM123A17BXC273KC 27000 K BX 100



pfCapacitance

ToleranceVoltage-

Temperature Limits

Rated Voltage

M123A16BXC272KC 2700 K BX 100M123A16BXC332_C 3300 K, MM123A16BXC392KC 3900 KM123A16BXC472_C 4700 K, MM123A16BXC562KC 5600 KM123A16BXC682_C 6800 K, MM123A16BXC822KC 8200 KM123A16BXC103_C 10000 K, M BX 100

M123A16BXB123KC 12000 K BX 50M123A16BXB153_C 15000 K, MM123A16BXB183KC 18000 KM123A16BXB223_C 22000 K, MM123A16BXB273KC 27000 KM123A16BXB333_C 33000 K, MM123A16BXB393KC 39000 KM123A16BXB473_C 47000 K, MM123A16BXB563KC 56000 KM123A16BXB683_C 68000 K, MM123A16BXB823KC 82000 KM123A16BXB104_C 100000 K, M BX 50

1/The complete part number shall include a symbol to indicate capacitance tolerance, as applicable.

1/The complete part number shall include a symbol to indicatecapacitance tolerance, as applicable.

1/The complete PIN will include additional letters to indicate voltage-temperature limits and capacitance tolerance, as applicable.

STYLE CKS22, -/16 STYLE CKS23, -/17 STYLE CKS24, -/18

NOTES:1. Dimensions are in inches.2. Leads shall be centered within ±.005 (0.13mm).3. The angle shall be 95° +10°, -5°.4. The distance between the centers of the mounting

holes will be .300 ±.010 inch (7.62 ±0.25mm).5. Nonconductive material shall not extend beyond .030

inch (0.76mm) from the edge of the capacitor body.

NOTES:1. Dimensions are in inches.2. Leads shall be centered within ±.005 (0.13mm).3. The angle shall be 95°+10°,-5° .4. The distance between the centers

of the mounting holes will be .300 ±.010 inch (7.62 ±0.25mm).

5. Nonconductive material shall not extend beyond .030 inch (0.76mm) from the edge of the capacitor body.

NOTES:1. Dimensions are in inches.2. Metric equivalents are given for general information only.3. Leads shall be centered within +.005 (0.13mm).4. The angle shall be 95° +10°, -5°.5. The distance between the centers of the mounting

holes will be .300 ±.010 inch (7.62 ±0.25mm).6. Nonconductive materials shall not extend beyond .030

inch (0.76mm) from the edge of the capacitor body.

MILITARYMIL-PRF-1232 Pin DIP

111319




MARKING

MILITARY PART NUMBER CROSS REFERENCE MIL-PRF-123/MIL-PRF-123 MIL-PRF-39014 MIL-PRF-20 MIL-PRF-55681 CATALOG

CKS # M123/ - CKR # M39014/ - CCR # M20/ - CDR # M55681/ -CKS05 /1 CKR05 /01 CCR05 /35 N/A N/A MR05CKS06 /2 CKR06 /02 CCR06 /36 N/A N/A MR06CKS11 /4 CKR11 /05 CCR75 /27 N/A N/A MA10CKS12 /5 CKR12 /05 CCR76 /28 N/A N/A MA20CKS14 /6 CKR14 /05 CCR77 /29 N/A N/A MA40CKS15 /7 CKR15 /05 CCR78 /30 N/A N/A MA50CKS16 /8 CKR16 /05 CCR79 /31 N/A N/A MA60CKS51 /10 N/A N/A N/A N/A CDR01 /1 0805CKS52 /11 N/A N/A N/A N/A N/A N/A 1210CKS53 /12 N/A N/A N/A N/A CDR03 /1 1808CKS54 /13 N/A N/A N/A N/A CDR06 /3 2225CKS22 /16 CKR22 /22 N/A N/A N/A N/A MD01CKS23 /17 CKR23 /22 N/A N/A N/A N/A MD02CKS24 /18 CKR24 /22 N/A N/A N/A N/A MD03

M123A02BPC271FCJAN

271 F100 V

0810AA12345

Cap. ValueCap. Tolerance and VoltageDate and 2 Digit Lot CodeFSCM

Part Number

CKS06, -/02

M123A01BPC4R7CC

JAN0810AA12345

Date and 2 Digit Lot CodeFSCM

Part Number

CKS05, -/01

Radials

123A270F0810

BUJAP

Spec. Number and Modi�cation CodeCap. Value and ToleranceDate CodeManufacturer’s Trademark and TC CodeLot Code and “J”

CKS11, -/04

Axials

Mfg. IDCap. Value and Tol.Top

CKS22, -/16; CKS23 -/17; & CKS24 -/18

2 Pin DIP

A123271K

Date and Lot CodeBottom JP0810BU

J123A05BPC111CW0810BU12345

Part Number

Date and Lot CodeFSCM

“J”

CKS12, -/05

M123A06BPC241FW

241 F100 V

J 0810BU12345

Part Number

Cap. ToleranceVoltageDate and Lot CodeFSCM

“J”

CKS14, -/06

Cap. Value

M123A07BPC241FW

241 F100 V

J 0810BU12345

Part Number


“J”

CKS15, -/07

Cap. Value

M123A08BPC241FW

241 F100 V

J 0810BU12345

Part Number


“J”

CKS16, -/08

Cap. Value

MILITARYMIL-PRF-123Marking

111319




Ceralam capacitors are available to European CECC specifications covering two standard dielectric materials: 1B/C0G, and 2C1/X7R.

To order use KYOCERA AVX part number with the Failure Rate code of “T” for CECC.

MOLDED RADIAL – CECC1B/A

CECC 30 601 009 Issue 12C1/C

CECC 30 701 007 Issue 150V 100V 200V 50V 100V 200V

B/MR05 1R0-682 1R0-472 1R0-332 221-224 221-154 221-393C/MR06 1R0-223 1R0-153 1R0-123 122-105 122-474 122-124

EUROPEAN CECCDetail Specifications - 30-601 & 30-701

111319


North AmericaTel: +1 864-967-2150

Central AmericaTel: +55 11-46881960

AsiaTel: +65 6286-7555

JapanTel: +81 740-321250

EuropeTel: +44 1276-697000

visit us at www.kyocera-avx.com

FOLLOW US:

www.kyocera-avx.com

https://www.instagram.com/avxcorp/?hl=en

https://www.linkedin.com/company/avxcorp/

https://twitter.com/AVXCorp?ref_src=twsrc%5Egoogle%7Ctwcamp%5Eserp%7Ctwgr%5Eauthor

https://www.youtube.com/user/AVXCorporation

https://www.facebook.com/avxcorp/

multilayer ceramic leaded capacitors

Documents