multiple comparisons in factorial experiments
DESCRIPTION
Multiple Comparisons in Factorial Experiments. If Main Effects are significant AND Interactions are NOT significant: Use multiple comparisons on factor main effects (factor means). If Interactions ARE significant: 1)Multiple comparisons on main effect level means - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/1.jpg)
22-22-11
Multiple Comparisons in Factorial Experiments
If Main Effects are significant AND Interactions are NOT significant:Use multiple comparisons on factor main effects (factor means).
If Interactions ARE significant:1) Multiple comparisons on main effect level means
should NOT be done as they are meaningless.2) Should instead perform multiple comparisons among
all factorial means of interest.
![Page 2: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/2.jpg)
In addition, interactions must be decomposed to determine what they mean
A significant interaction between two variables means that one factor value changes as a function of the other, but gives no specific information
The most simple and common method of interpreting interactions is to look at a graph
Multiple Comparisons in Factorial Experiments
![Page 3: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/3.jpg)
Problems in factorial experiment
1. In some two-factor experiments the level of one factor, say B, is not really similar with the other factor.
2. There are multifactor experiments that address common economic and practical constraints encountered in experimentation with real systems.
3. There is no link from any sites on one area to any sites on another area.
Nested and Split-plot design
![Page 4: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/4.jpg)
Cross and nested The levels of factor A are said to be crossed
with the level of factor B if every level of A occurs in combinations with every level of B
Factorials design The levels of factor B are said to be nested
within the level of factor A if the levels of B can be divided into subsets (nests) such that every level in any given subset occurs with exactly one level of A
Nested design
![Page 5: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/5.jpg)
Fertilizers can be applied to individual fields;Insecticides must be applied to an entire farm
from an airplane
Agricultural Field Trial Investigate the yield of a new variety of crop Factors
• Insecticides• Fertilizers
Experimental Units• Farms• Fields within farms
Experimental Design ?
![Page 6: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/6.jpg)
Agricultural Field Trial
Insecticides applied to farms One-factor ANOVA
Main effect: Insecticides MSE: Farm-to-farm
variability
Farms
![Page 7: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/7.jpg)
Agricultural Field Trial Fertilizers
applied to fields
One-factor ANOVAMain Effect:
FertilizersMSE: Field-to-
field variability
Fields
![Page 8: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/8.jpg)
Agricultural Field Trial
Insecticides applied to farms, fertilizers to fields
Two sources of variability Insecticides subject to
farm-to-farm variability Fertilizers and
insecticides x fertilizers subject to field-to-field variability
Farms
Fields
![Page 9: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/9.jpg)
Nested DesignFactorial design when the levels of one factor (B) are similar, but not identical to each other
at different levels of another factor (A).
a1
b1
b2
a2
b3
b4
![Page 10: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/10.jpg)
Nested Design
![Page 11: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/11.jpg)
Nested Design A factor B is considered nested in
another factor, A if the levels of factor B differ for different levels of factor A.
The levels of B are different for The levels of B are different for different levels of A.different levels of A.
Synonyms indicating nesting:Hierarchical, depends on, different for,
within, in, each
![Page 12: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/12.jpg)
Examples - Nested
![Page 13: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/13.jpg)
Examples - Nested
![Page 14: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/14.jpg)
Examples - Crossed5-1 The yield of a chemical process is being studied. The two most important variables are thought to be the pressure and the temperature. Three levels of each factor are selected, and a factorial experiment with two replicates is performed. The yield data follow:
Pressure Temperature 200 215 230
150 90.4 90.7 90.2 90.2 90.6 90.4
160 90.1 90.5 89.9 90.3 90.6 90.1
170 90.5 90.8 90.4 90.7 90.9 90.1
![Page 15: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/15.jpg)
Examples - Crossed5-2 An engineer suspects that the surface finish of a metal part is influenced by the feed rate and the depth of cut. She selects three feed rates and four depths of cut. She then conducts a factorial experiment and obtains the following data:
Depth of Cut (in) Feed Rate (in/min) 0.15 0.18 0.20 0.25
74 79 82 99 0.20 64 68 88 104
60 73 92 96 92 98 99 104
0.25 86 104 108 110 88 88 95 99 99 104 108 114
0.30 98 99 110 111 102 95 99 107
![Page 16: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/16.jpg)
Examples - Nested
![Page 17: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/17.jpg)
Two-Stage Nested DesignStatistical Model and ANOVA
( ) ( )
( )
1,2,...,1, 2,...,1, 2,...,
: 1 1 ( 1) ( 1)
ijk i j i ij k
T A B A E
i ay j b
k n
SS SS SS SS
df abn a a b ab n
a
i
b
j
n
kijkT
a
i
a
i
b
jij
b
j
n
kijkE
a
i
a
ii
b
jijAB
a
iiA
abnyySS
yn
ySS
ybn
yn
SS
abnyy
bnSS
1
2...
1 1
2
1 1 1
2.
1 1
2
1 1
2..
1
2.)(
1
2...2
..
1
11
1
![Page 18: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/18.jpg)
Two-Stage Nested DesignStatistical Model and ANOVA
![Page 19: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/19.jpg)
Residual AnalysisResidual Analysis Calculation of residuals.Calculation of residuals.
.
............
...)(........
)()(
)()(ˆ
ˆ , ˆ , ˆ
ijijkijk
ijiijiijk
iijijii
kijijiijk
yye
yyyyyyy
yyyyy
y
![Page 20: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/20.jpg)
mm-Stage Nested Design-Stage Nested Design
)()()( ijklijkijiijkly
![Page 21: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/21.jpg)
m-Stage Nested DesignTest statistics depend on the type of Test statistics depend on the type of
factors and the expected mean squares.factors and the expected mean squares.• Random.Random.
• Fixed.Fixed.
![Page 22: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/22.jpg)
Expected Mean SquaresExpected Mean SquaresAssume that fixtures and layouts are fixed,
operators are random – gives a mixed model (use restricted form).
![Page 23: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/23.jpg)
Alternative Analysis If the need detailed analysis is not available, start with multi-factor
ANOVA and then combine sum of squares and degrees of freedom. Applicable to experiments with only nested factors as well as
experiments with crossed and nested factors.Sum of squares from interactions are combined with the sum of squares for a
nested factor – no interaction can be determined from the nested factor.
![Page 24: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/24.jpg)
Alternative Analysis
![Page 25: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/25.jpg)
Split-Plot Design
Factorial experiment can have either of these features:Two hierarchically nested factors, with additional crossed factors occurring within levels of the nested factorTwo sizes of experimental units, one nested within the other, with crossed factors applied to the smaller units
In a single factor experiment has different features, such as:1.Multi-locations2.Repeated measurements
Further phenomena in Experimental Design
![Page 26: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/26.jpg)
Split-plot DesignThere are numerous types of split-plot designs, including the Latin square split plot design, in which the assignment of the main treatments to the main plots is based on a Latin square design.A split-plot design can be conceptualized as consisting of two designs: a main plot design and a subplot design.The main plot design is the protocol used to assign the main treatment to the main units. In a completely randomized split-plot design, the main plot design is a completely randomized design, in a randomized complete block design, by contrast, the main plot design is a RCBD.The subplot design in a split-plot experiment is a collection of a RCBD, where a is the number of main treatment. Each of these RCBDs has b treatments arranged in r blocks (main plots), where b is the number of sub treatment.
![Page 27: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/27.jpg)
Split-Plot Design
Whole-Plot Experiment : Whole-Plot Factor = A
Level a1 Level a2 Level a2 Level a1
![Page 28: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/28.jpg)
Split Plot DesignsAnalysis of Variance Table
Source dfWhole-Plot Analysis
Factor A a-1Whole-Plot Error a(r-1)
![Page 29: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/29.jpg)
Split-Plot DesignSplit-Plot Design
Split-Plot Experiment : Split-Plot Factor = B
Level a1
Level a2 Level a2 Level a1
b2
b1
b2
b1
b1
b1
b2
b2
b1
b2
b2
b1
b2
b1
b1
b2
![Page 30: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/30.jpg)
Split Plot DesignsSplit Plot DesignsAnalysis of Variance TableAnalysis of Variance Table
Source dfWhole-Plot Analysis
Factor A a-1Whole-Plot Error a(r-1)
Split-Plot AnalysisFactor B b-1A x B (a-1)(b-1)Split-Plot Error a(b-1)(r-1)Total abr-1
![Page 31: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/31.jpg)
Agricultural Field Trial
![Page 32: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/32.jpg)
Agricultural Field TrialAgricultural Field TrialInsecticide 2 Insecticide 2
Insecticide 2
Insecticide 1 Insecticide 1
Insecticide 1
![Page 33: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/33.jpg)
Agricultural Field TrialAgricultural Field Trial
Fert B Fert AFert A
Fert A
Fert A
Fert A
Fert A
Fert A
Fert A
Fert A
Fert A
Fert A
Fert A Fert AFert A
Fert A
Fert A
Fert A
Fert A
Fert A
Fert AFert B Fert B
Fert B
Fert B
Fert B
Fert BFert B
Fert BFert B
Fert B
Fert B
Fert B
Fert B
Fert B
Fert B
Fert BFert B
Fert BFert B
Insecticide 2 Insecticide 2
Insecticide 2
Insecticide 1 Insecticide 1
Insecticide 1
![Page 34: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/34.jpg)
Agricultural Field TrialAgricultural Field Trial
Whole Plots = Farms
Split Plots = Fields
Large Experimental Units
Small Experimental Units
![Page 35: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/35.jpg)
Agricultural Field TrialAgricultural Field Trial
Whole Plots = Farms
Split Plots = Fields
Large Experimental Units
Small Experimental Units
Whole-Plot Factor = InsecticideWhole-Plot Error = Whole-Plot Replicates
Split-Plot Factor = FertilizerSplit-Plot Error = Split-Plot Replicates
![Page 36: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/36.jpg)
The Split-Plot Designa multifactor experiment where it is
not practical to completely randomize the order of the runs.
Example – paper manufacturing• Three pulp preparation methods.• Four different temperatures.• The experimenters want to use three
replicates.• How many batches of pulp are
required?
![Page 37: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/37.jpg)
The Split-Plot Design Pulp preparation method is a hard-to-
change factor. Consider an alternate experimental design:
• In replicate 1, select a pulp preparation method, prepare a batch.
• Divide the batch into four sections or samples, and assign one of the temperature levels to each.
• Repeat for each pulp preparation method.• Conduct replicates 2 and 3 similarly.
![Page 38: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/38.jpg)
The Split-Plot Design Each replicate has been divided into three
parts, called the whole plots.• Pulp preparation methods is the whole plot
treatment. Each whole plot has been divided into four
subplots or split-plots.• Temperature is the subplot treatment.
Generally, the hard-to-change factor is assigned to the whole plots.
This design requires 9 batches of pulp (assuming three replicates).
![Page 39: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/39.jpg)
The Split-Plot Design
Tensile StrengthRep (Day) 1 Rep (Day) 2 Rep (Day) 3
Pulp Prep Method 1 2 3 1 2 3 1 2 3Temperature
200 30 34 29 28 31 31 31 35 32225 35 41 26 32 36 30 37 40 34250 37 38 33 40 42 32 41 39 39275 36 42 36 41 40 40 40 44 45
![Page 40: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/40.jpg)
The Split-Plot DesignThere are two levels of randomization
restriction.• Two levels of experimentation
Tensile StrengthRep (Day) 1 Rep (Day) 2 Rep (Day) 3
Pulp Prep Method 1 2 3 1 2 3 1 2 3Temperature
200 30 34 29 28 31 31 31 35 32225 35 41 26 32 36 30 37 40 34250 37 38 33 40 42 32 41 39 39275 36 42 36 41 40 40 40 44 45
![Page 41: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/41.jpg)
Experimental Units in Split Plot Designs
Possibilities for executing the example split plot design.• Run separate replicates. Each pulp prep method
(randomly selected) is tested at four temperatures (randomly selected).
Large experimental unit is four pulp samples. Smaller experimental unit is a an individual sample.
• If temperature is hard to vary select a temperature at random and then run (in random order) tests with the three pulp preparation methods.
Large experimental unit is three pulp samples. Smaller experimental unit is a an individual sample.Tensile Strength
Rep (Day) 1 Rep (Day) 2 Rep (Day) 3Pulp Prep Method 1 2 3 1 2 3 1 2 3
Temperature200 30 34 29 28 31 31 31 35 32225 35 41 26 32 36 30 37 40 34250 37 38 33 40 42 32 41 39 39275 36 42 36 41 40 40 40 44 45
![Page 42: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/42.jpg)
The Split-Plot Design Another way to view a split-plot Another way to view a split-plot
design is a RCBD with replication.design is a RCBD with replication.• Inferences on the blocking factor can be Inferences on the blocking factor can be
made with data from replications.made with data from replications.
![Page 43: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/43.jpg)
The Split-Plot Design Model The Split-Plot Design Model and Statistical Analysisand Statistical Analysis
( ) ( ) ( )
1,2,...,( ) 1,2,...,
1,2,...,
ijk i j ij k ik jk
ijk ijk
y
i rj ak b
Sum of squares are computed as for a three factor factorial design without replication.
![Page 44: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/44.jpg)
RCBD Model
.,,2,1 ;,,2,1for
n)replicatio no with model factorialfactor (twofrom obtained be alsocan squares of sum or the
.,,2,1 ;,,2,1for
:model) (effects model lStatistica
bjaiy
bjaiy
ijijjiij
ijjiij
![Page 45: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/45.jpg)
The Split-Plot Design Model and The Split-Plot Design Model and Statistical AnalysisStatistical Analysis
There are two error structures; the whole-plot error and the subplot error
![Page 46: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/46.jpg)
Split-Plot Design
Whole-Plot Experiment : Whole-Plot Factor = A
Level a1 Level a2 Level a2 Level a1
![Page 47: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/47.jpg)
Split-Plot DesignSplit-Plot Design
Split-Plot Experiment : Split-Plot Factor = B
Level a1
Level a2 Level a2 Level a1
b2
b1
b2
b1
b1
b1
b2
b2
b1
b2
b2
b1
b2
b1
b1
b2
![Page 48: Multiple Comparisons in Factorial Experiments](https://reader036.vdocument.in/reader036/viewer/2022081513/568167b9550346895ddd087e/html5/thumbnails/48.jpg)
Split-Plot DesignSplit-Plot Design
Split-Plot Experiment : Split-Plot Factor = B
Level a1
Level a2 Level a2 Level a1
b1
b2
b1
b1
b1
b2
b2
b1
b2
b2
b1
b2
b1
b1
b2