multirate sonet juniper

DATASHEET

1

Product Description The Juniper Networks® Multi-Rate SONET/SDH PICs product family is a suite of SONET/

SDH interface modules that supports rich packet processing, multiple IP services, and

uncompromising performance while offering market-leading port density and flexibility.

These modules provide IP-over-SONET/SDH optical connectivity to backbone and

access circuits.

The product suite consists of several PICs that meet various speed and density requirements:

PIC DescriptionRate and Maximum Density Supported

OC-3/STM-1 OC-12/STM-4 OC-48/STM-16

Supported on M7i, M10i Multiservice Edge Routers2-port OC-3/STM-1 PIC 2 - -

1-port OC-12/STM-4 or OC-3/STM-1

1 1 -

4-port OC-3/STM-1 or 1-port OC-12/STM-4

4 1 -

Supported on M40e, M120, M320, T640, T1600 Routers4-port OC-3/STM-1 or 1-port OC-12/STM-4

4 1 -

1-port OC-12/STM-4 or OC-3/STM-1

1 1 -

1-port OC-48/STM-16 rate selectable

1 1 1

4-port mixed OC-3/STM-1 or OC-12/STM-4 (any combination or 1-port OC-48/STM-16

4 4 1

Product Overview

SONET/SDH is a widely deployed,

mature enabling technology

providing high-speed, large-scale

IP networks. This dependable

technology combines high-bandwidth

capacity with efficient link utilization,

making it a major building block for

accommodating a fast growing IP

infrastructure both in the core and on

the edge.

As demand for more bandwidth

increases, so does the demand to

build out new, state-of-the-art IP

infrastructures to achieve greater

backbone throughput and faster

network response times. Juniper

Networks is at the forefront of IP

infrastructure build-out, offering a

complete range of SONET/SDH PICs,

supporting configurable speeds from

OC-3c/STM-1 through OC-48c/STM-

16 along with modular optics.

MULTI-RATE SONET/SDH PICS

2

Features and Benefits Feature Feature Description Benefit

Per-port SONET/SDH framing Per-port configuration of SONET or SDH framing on multi-port PICs—allows mixing SONET and SDH framing on the same PIC

• Increases usage flexibility by allowing the combination of heterogeneous framings, rates and optics on the same PIC

• Improves spare managementPer-port rate-selectable Per-port configuration of rates from OC-3 to OC-48

Pluggable optics Modular SFP based optics

SONET link aggregation Allows bundling of multiple interfaces • Increases performance by aggregating available bandwidth

• Increases network reliability• Provides link redundancy• Increases scalability using existing SONET/SDH

technology to provide additional bandwidth

Dual-router Automatic Protection Switching (APS), SDH MSP and MPLS fast reroute protection mechanisms

Allows transport and MPLS rapid protection schemes Increases network reliability with under 50ms failover

1-port OC-12/STM-4 or OC-3/STM-1 or1-port OC-48/STM-16 rate selectable

4-port OC-3/STM-1 or 1-port OC-12/STM-4, or4-port mixed OC-3/STM-1 or OC-12/STM-4 of 1-port OC-48/STM-16

2-port OC-3/STM-1 PIC

3

SpecificationsEncapsulation• Cisco High-level Data Link Control (cHDLC)

• Point-to-Point Protocol (PPP)

• MPLS circuit cross-connect (CCC)

• MPLS translational cross-connect (TCC)

• Frame Relay

• MPLS

LEDs• Off — PIC not enabled

• Green — online with no alarms or failures

• Amber — online with alarms for remote failures

• Red—active with a local alarm; router has detected a failure

Agency ApprovalsEMC

• AS 3548 Class A (Australia)

• EN55022 Class A (Europe)

• FCC Class A (USA)

• VCCI Class A (Japan)

• BSMI Class A (Taiwan)

Immunity

• EN-61000-3-2 Power Line Harmonics

• EN-61000-4-2 ESD

• EN-61000-4-3 Radiated Immunity

• EN-61000-4-4 EFT

• EN-61000-4-5 Surge

Agency Approvals

• EN-61000-4-6 Low Frequency Common Immunity

• EN-61000-4-11 Voltage Dips and Sags

• ETS-300386-2 Switching Equipment

NEBS

• SR-3580 NEBS Criteria Levels

• GR-63-CORE: NEBS, Physical Protection

• GR-1089-CORE: EMC and Electrical Safety for Network

Telecommunications Equipment

AlarmsSONET alarms

• Alarm indication signal—line (AIS-L)

• Alarm indication signal—path (AIS-P)

• Bit error rate signal degrade (BERR-SD)

• Bit error rate signal fail (BERR-SF)

• Bit interleaved parity (BIP) error B1



• Loss of frame (LOF)

• Loss of pointer (LOP-P)

• Loss of signal (LOS)

• Far-end bit error: remote error indication—line (REI-L) (CV-LFE)

• Far-end bit error: remote error indication—path (REI-P) (CV-PFE)

• Payload mismatch (path label mismatch) (PLM-P)

• Payload unequipped (unequipped STS at path level)(UNEQ-P)

• Remote defect indication—line (RDI-L)

• Remote defect indication—path (RDI-P)

SDH alarms

• Multiplex section alarm indication signal (MS-AIS)

• Administrative unit alarm indication signal (AU-AIS)

• Bit error rate signal degrade (BERR-SD)

• Bit error rate signal fail (BERR-SF)




• Loss of frame (LOF)

• Loss of pointer (HP-LOP)

• Loss of signal (LOS)

• Multiplex section remote error indication (MS-REI)

• Higher path label mismatch (HP-PLM)

• Higher path unequipped (HP-UNEQ)

• Multiplex section remote defect indication (MS-RDI)

• Higher path remote defect indication (HP-RDI)

• Errored seconds (ES-S, ES-L, ES-P), far-end errored seconds (ES-

LFE, ES-PFE), far-end severely errored seconds (SES-LFE, SES-

PFE), far-end unavailable seconds (UAS-LFE, UAS-PFE)

• Severely errored framing (SEF), severely errored framing seconds

(SEFS-S), severely errored seconds (SES-S, SES-L, SES-P),

unavailable seconds (UAS-L, UAS-P)

4

Small Form-factor Pluggable (SFP) SpecificationsOC-3/STM-1 SFP

Parameter Multimode (SR) Intermediate Long Reach (LR-1)

Transceiver model number SFP-OC3-SR SFP-OC3-IR SFP-OC3-LR

Optical interface Multimode Single-mode Single-mode

Transceiver type SFP SFP SFP

Maximum distance MMF cable: 1.2 miles/2 km SMF cable: 9.3 miles/15 km SMF cable: 24.85 miles/40 km

Standard Multivendor agreement Telcordia GR-253 Telcordia GR-253

Transmitter wavelength 1270 through 1380 nm 1261 through 1360 nm 1263 through 1360 nm

Average launch power –20 through –14 dBm –15 through –8 dBm –5 through 0 dBm

Receiver saturation –14 dBm –8 dBm –10 dBm

Receiver sensitivity –30 dBm –28 dBm –34 dBm

OC-12/STM-4 SFPParameter Short Reach (SR-1) Intermediate Reach (IR-1) Long Reach (LR-1)

Transceiver model number SFP-OC12-SR SFP-OC12-IR SFP-OC12-LR

Optical interface Single-mode Single-mode Single-mode


Maximum distance SMF cable: 1.24 miles/2 km SMF cable: 9.3 miles/15 km SMF cable: 24.85 miles/40 km

Standard Telcordia GR-253 Telcordia GR-253 Telcordia GR-253


Average launch power –15 through –8 dBm –15 through –8 dBm –3 through +2 dBm

Receiver saturation –8 dBm –8 dBm –8 dBm


OC-48/STM-16 SFPParameter Short Reach (SR-1) Intermediate Reach (IR-1) Long Reach (LR-1)

Transceiver model number SFP-OC48-SR SFP-OC48-SR SFP-OC48-SR

Optical interface Single-mode Single-mode Single-mode


Maximum distance SMF cable: 1.24 miles/2 km SMF cable: 9.3 miles/15 km SMF cable: 24.85 miles/40 km

Standard Telcordia GR-253 Telcordia GR-253 Telcordia GR-253


Average launch power –10 through –3 dBm –5 through 0 dBm –2 through +3 dBm

Receiver saturation –3 dBm 0 dBm –9 dBm


5

Juniper Networks Services and SupportJuniper Networks is the leader in performance-enabling services that are designed to accelerate, extend, and optimize your high-

performance network. Our services allow you to maximize operational efficiency while reducing costs and minimizing risk, achieving a

faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required

levels of performance, reliability, and availability. For more details, please visit juniper.net/us/en/products-services.

Ordering Information

Model Number Supported Platforms Description FPC1

Type

PE-2OC3-SON-SFP M7i, M10i 2-port OC-3/STM-1 PIC. Requires OC-3 SFP pluggable optics. -

PE-1OC12-SON-SFP M7i, M10i 1-port OC-12/STM4- or OC-3/STM-1, rate-selectable PIC. Requires OC-12 or OC-3 SFP pluggable optics.

-

PE-4OC3-1OC12-SON-SFP M7i, M10i 4-port OC-3/STM-1 or 1-port OC-12/STM-4, rate-selectable PIC. Port 0 can be configured to OC-12 which disables ports 1-3. Requires OC-3 or OC-12 SFP pluggable optics.

-

PB-1OC12-SON-SFP M40e, M120, M320, T320, T640, T1600 1-port OC-12/STM-4 or OC-3/STM-1, rate-selectable PIC. Requires OC-12 or OC-3 SFP pluggable optics.

1

PB-4OC3-1OC12-SON-SFP M40e, M120, M320, T320, T640, T1600 4-port OC-3/STM-1 or 1-port OC-12/STM-4, rate-selectable PIC. Port-0 can be configured to OC-12 which disables ports 1-3. Requires OC-3 or OC-12 SFP pluggable optics.

1

PB-4OC3-1OC12-SON2-SFP M40e, M120, M320, T320, T640, T1600 4-port OC-3/STM-1 or 1-port OC-12/STM-4, rate-selectable PIC. Port-0 can be configured to OC-12 which disables ports 1-3. Requires OC-3 or OC-12 SFP pluggable optics.

2

PB-1OC48-SON-B-SFP M40e, M120, M320, T320, T640, T1600 1-port OC-48/STM-16 rate selectable PIC. Port speed is configurable to OC-12 or OC-3. Requires OC-48, or OC-12, or OC-3 SFP pluggable optics.

2

PB-4OC3-4OC12-SON-SFP M40e, M120, M320, T320, T640, T1600 4-port OC-3/STM-1 or OC-12/STM-4 or OC-48/STM-16, per port rate-selectable PIC. Ports 0-3 can be mixed with OC-3/STM-1 and OC-12/STM-4. Port 0 can be configured to OC-48 which disables ports 1-3. Requires OC-3 or OC-12 or OC-48 SFP pluggable optics.

2

1Flexible PIC Concentrator.

SFP OptionsModel Number Description

SFP-1OC3-SR OC-3 SFP 1310 nm 2 km reach multimode

SFP-1OC3-IR OC-3 SFP 1310 nm 15 km reach single-mode

SFP-1OC3-LR OC-3 SFP 1310 nm 40 km reach single-mode

SFP-1OC12-SR OC-12 SFP 1310 nm 2 km reach single-mode



SFP-1OC48-SR OC-48 SFP 1310 nm 2 km reach single-mode



http://www.juniper.net/us/en/products-services/

6

1000248-003-EN Nov 2011

Copyright 2011 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.

EMEA Headquarters

Juniper Networks Ireland

Airside Business Park

Swords, County Dublin, Ireland

Phone: 35.31.8903.600

EMEA Sales: 00800.4586.4737

Fax: 35.31.8903.601

APAC Headquarters

Juniper Networks (Hong Kong)

26/F, Cityplaza One

1111 King’s Road

Taikoo Shing, Hong Kong

Phone: 852.2332.3636

Fax: 852.2574.7803

Corporate and Sales Headquarters

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, CA 94089 USA

Phone: 888.JUNIPER (888.586.4737)

or 408.745.2000

Fax: 408.745.2100

juniper.net

Printed on recycled paper

To purchase Juniper Networks solutions,

please contact your Juniper Networks

representative at 1-866-298-6428 or

authorized reseller.

About Juniper NetworksJuniper Networks is in the business of network innovation. From

devices to data centers, from consumers to cloud providers,

Juniper Networks delivers the software, silicon and systems that

transform the experience and economics of networking. The

company serves customers and partners worldwide. Additional

information can be found at juniper.net.

http://www.juniper.net

http://www.juniper.net

multirate sonet juniper

Documents