Machine optionsMultiSwiss 6x16

We keep you turning

273-0053

273-0054

273-0100

273-0115

Options Machine2

Machine options

Description

Integrated X-Y numerical axes, position 3 Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx)

Integrated X-Y numerical axes, position 4. Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx)

Part separator and pneumatic chute for parts with a 40 mm max. length and chute of 70 mm max. Integrated carrousel, small capacity.

Integrated carrousel, small capacity. Specify the configuration of the baskets at the of order : - 5 x 270 cm3 or 10 x 90 cm3 or 20 x 50 cm3 (requires 0100)

273-0120

273-0200

273-0210

273-0300

3Options Machine

Description

Integrated carrousel, large capacity. Includes 12 baskets of 1.7 L (requires 0100) (not compatible with 0110, 0115, 0125)

Fixed re-chucking device mounted in position 1 (requires 0830 and 1200)

Hydraulic loading device mounted in position 1, F16 collet not included. Recommended for bars at least Ø10 mm Mandatory for bars from Ø12 to 16 mm (requires 273-0815)

Oil pan with grid

273-0400

273-0801

273-0815

273-0820

Options Machine4

Machine options

Description

Status tower

7 clamping collets Ø 4-16 available by 1 mm increment to be specified at time of order

Clamping collet type F16 For hydraulic loading device Diameter to be specified at time of order

7 clamping collets Ø 4-16 Grooved (by 1 mm) Ø to be specified at time of order

273-0830

273-0840

273-0841

273-0842

5Options Machine

Description

1 re-chucking collet mounted on option 0200 Ø to be specified at time of order. Set of 6 clamping tubes Ø 15 (12-14)

Set of 6 clamping tubes Ø 15 (12-14)

Set of 6 clamping tubes Ø 12 (9-11)

Set of 6 clamping tubes Ø 9 (6-8)

273-0843

273-0844

273-0845

273-0849

Options Machine6

Machine options

Description

Set of 6 clamping tubes Ø 7 (4-6)

Set of 6 clamping tubes Ø 5 (3-4)

Set of 6 clamping tubes Ø 16,40 (15-16)

Set of 6 reduction tubes Ø 15 (12-14)

273-0850

273-0851

273-0852

273-0853

7Options Machine

Description

Set of 6 reduction tubes Ø 12 (9-11)

Set of 6 reduction tubes Ø 9 (6-8)

Set of 6 reduction tubes Ø 7 (4-6)

Set of 6 reduction tubes Ø 5 (3-4)

273-0855

273-0900

273-1010

273-1011

Options Machine8

Machine options

Description

Set of 6 reduction tubes Ø 17 (15-16)

1 pick up collet Ø 3-16 mm including blank ejector Collet Ø to be specified at time of order.

Turning tool holder, base (16x16).

Additional turning tool holder (16X16) (requires 1010) (not com-patible with 1200) Additional tool holder for drilling (16X16)

273-1012

273-1013

273-1050

273-1120

9Options Machine

Description

Additional tool holder for drilling (16X16) for short parts or short holes. (requires 1010 or 1020) (not compatible with 1200)

Turning tool holder, base (16x16) for reversed rotation.

Transversal support for a HF spindle (not compatible with 1010, 1020)

Cut-off tool holder monted on position 6

273-1200

273-1205

273-1220

273-1240

Options Machine10

Machine options

Description

Support for 2 end units Ø 25 (not compatible with 0300, 1011, 1012, 1240)

Clamping flange for HFspindle Ø25 mm. Needed with function 1200 + 2120

Fixed end working drill holder Ø 25 with collet for ESX-16, 10 mm capacity. Pos. 2 to 5 (requires 1200)

Support for 3 end units Ø 16 (not compatible with 0300, 1011, 1012, 1200)

273-1241

273-1242

273-1300

273-1310

11Options Machine

Description

Steady end working drill holder Ø 16 with collet for ESX-12, 7 mm capacity. Pos. 2 to 4 (requires 1240)

Short steady end working drill holder Ø 16 with collet for ESX-12, 7 mm capacity. Pos. 2 to 5 (requires 1240)

Support for tool holders in counter operation

Counter operation tool holder for 16X16 cutting tool. (requires 1300)

273-1330

273-1331

273-1340

273-1400

Options Machine12

Machine options

Description

Support for steady drill holder for counter operations. Thru-spraying. (requires 1310)

Steady drill holder for counter operations (requires 1330)

Centering holder for the COP mounted in the 16x16 tool holder. (requires 1310)

Double drill holders Ø 6 mm for the counter operation. (requires 1310 or 1450) (not compatible with 1330)

273-1410

273-1450

273-1470

273-1501

13Options Machine

Description

Reamer holder for counter operations (requires 1310 or 1450) (not compatible with 1330)

Transversal support for a HF spindle in COP (requires 1300) (not compatible with 1310)

Cross support for a Right Angle HF spindle for the COP. (Requires 1300) (not compatible with 1310 and 1450)

GWS basic support mounted in position 1 to 5

273-1502

273-1503

273-1510

273-1540

Options Machine14

Machine options

Description

Centering element for GWS basic support

Protection of the GWS tool holder interface for turning (requires 1501) Not compatible with 1510)

GWS turning tool holder 16x16 for MO and COP (requires 1501 05 1580) (not compatible with 1503)

Support for GWS cut off tool holder mounted in position 6

273-1541

273-1550

273-1551

273-1580

15Options Machine

Description

GWS cut off tool holder ISCAR type (requires 1540)

Support with 2 axial bores Ø 25 (not compatible with 0300, 1240)

GWS tool holder with 2 Ø 25 bores for fix drilling (requires 1551) (compatible with 1205 and 1220)

GWS tool holder support for COP

273-1581

273-1582

273-2003

273-2004

Options Machine16

Machine options

Description

GWS tool holder with 2 Ø 6 bores for fix drilling in COP (requires 1580) (not compatible with 1582)

GWS tool holder with 1 Ø 12 bore for fix drilling in COP (requires 1580) (not compatible with 1581)

Electrical interface for drilling or polygon attachments (DCS version). 2 attachments positions 3 to 5 (not compatible with 0001)

Electrical interface for drilling or polygon attachments (DCS version). 2 additional attachments positions 2 and 5 (requires 2003)

273-2010

273-2020

273-2030

273-2100

17Options Machine

Description

Cross drilling attachment, ratio 1:1 Max. 4’000 RPM - max. 8.8 Nm Pos. 2 to 5 (requires 2001 or 2002 or 2003 or 2004) (not com-patible with 1010, 1020, 1050, 2020, 2030, 2040) (not compatible with 2300, 2500)

Cross drilling attachment, ratio 2:1 Max. 8’000 RPM - max. 4.4 Nm Pos. 2 to 5 Coolant through the center (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 2010, 2030, 2040) (not compatible with 2300, 2500)

End drilling attachment, ratio 2:1 Max. 8’000 RPM - max. 4.4 Nm Pos. 2, 3, 4 (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205) (not compatible with 2010, 2020, 2040, 2300, 2500)

Adaptation for 4 HF drilling attachments. (not compatible with 0752, 0753, 0755)

273-2110

273-2120

273-2130

273-2300

Options Machine18

Machine options

Description

Drive for HF spindles (requires 2100)

High frequency spindle 5’000-60’000 RPM. - 0.03 Nm (requires 1050 or 1205 or 1450) (requires 2110)

High Frequency spindle 90° 3,300-13,300 RPM - 0.04 Nm (Requires 1470) (requires 2110)

FETTE T-120 thread rolling attachment

273-2400

273-2500

273-3010

273-3020

19Options Machine

Description

Milling attachment. For positions 2, 3, 4 or 5. Max RPM : 4,500 - Max 18 Nm a the tool. Max milling cutter Ø 50 mm. Max. width : 16 mm. (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205, 1501) (not compatible with 2010, 2020, 2030, 2040, 2300)

Polygon attachment For positions 2, 3, 4 or 5. Max. 2’000 RPM - max. 8 Nm at tool Milling cutter Ø 80 mm max., max. width 12 mm. (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205) (not compatible with 2010, 2020, 2030, 2040, 2300)

High pressure pump group 37,5 l/min. 40 bar (requires 3001 or 3003) (not compatible with 3020)

High pressure pump group 26 l/min. 80 bar (requires 3001 or 3003) (not compatible with 3010)

273-3050

273-3150

273-3200

273-3250

Options Machine20

Machine options

Description

Coolant fed, HP, rotating ejector. (requires 3010 or 3020)

Chip tank recovery for paper

Chip conveyor with belt *** and sump pump. (not compatible with 3100)

Swarf tank for conveyor *** (requires 3200)

273-3500

273-3510

273-3520

273-3600

21Options Machine

Description

Additional roll of filter paper for the filtration device.

Replacement cartridge for the hydrostatic group filter (5 µm).

Replacement cartridge for security filter for the hydrostatic group (20 µm).

Group to produce cold water 33 kW, integrated to the container. (not compatible with 3601)

273-3700

273-3710

273-3802

273-4010

Options Machine22

Machine options

Description

Fire fighting device KRAFT & BAUER *** Mechanical integration & interface included Extinction agent : CO2 Use with a centralize air filtering system.

Fire fighting damper, with pneumatic activation (Not compati-ble with 3800 and 3802)

Oilmist extractor 1400 m³/h (50 Hz) - 1600 m³/h (60 Hz). Electrostatic filter Horizontal version, total height 2,9 m.

Electric tool breakage detector Middex type WK2. Detection of 1 tool per position max. Position 1 to 5

273-4500

273-4510

273-4610

273-4700

23Options Machine

Description

Tool pre-setter MultiSwiss *** (requires 4510)

Adaptation to pre-set tools for tool pre-setter MultiSwiss.

Adaptation to pre-set Multiswiss tools for tool pre-setter Multi.

Spindle centering system - Mowidec

AngleDistan

ce

Polar

273-5200

273-7651

273-7652

273-7653

Options Machine24

Machine options

Description

System for tool management

Function axis C in main operations 6 spindles/increment 0,001 degree

Function axis C in counter-operations 1 spindle/increment 0,001 degree

Milling function in polar coordinates (interpolation of the axis C with a linear axis) (requires 750-0005)

°C273-7660

273-7670

273-7675

273-7700

25Options Machine

Description

Machine warm up Automatic turn ON of the warm up cycle (requires 273-0400)

Remote Assistance Service allowing TORNOS the remote visu-alization of the machine CNC screen. Out of warranty interven-tion time included (requires a connection to the Internet)

Router ethernet for remote maintenance secured Service allow-ing the visualization At a distance screens CNC by TORNOS (require connection to an Internet network)

Software package “all inclusiv” - Remote assistance - Machine warm up - System of tool manager - Milling function in polar coordinates - Function C axis in main operations in counter operation

We keep you turning

Edit

ion

Mar

s 20

16 –

© T

orno

s 20

16, A

ll rig

hts

rese

rved

cm

TornosTORNOS SA throughout the worldRue Industrielle 111 CH-2740 MoutierPhone +41 (0)32 494 44 44Fax +41 (0)32 494 44 03contact@tornos.com

Conforms to the European CE / CEM Safety StandardsThis document is based on information available at the time of publication. While every effort has been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware and software, nor to provide for every pos-sible contingency in connection with installation, operation and maintenance. TORNOS SA assumes no obligation of notice to holders of this document with respect to changes sub-sequently made. TORNOS SA makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency or usefulness of the information contained herein. No warranties of merchant-ability nor fitness for purpose shall apply.tornos.com