mx stationary booms
TRANSCRIPT
MX stationary boomsAmazing artistic movements
2 332
Under its own power to the end
MX stationary booms offerexpansion options
The application areas of stationary boomsare broad and diverse. They are used just as economically for the construction of power stations, caverns, liquid gas tanks and bridges as they are on various high-rise buil-ding construction sites. They are ideally sui-ted for integration in climbing formwork, the autonomous through-climbing of floors, as well as free-standing installations.
Hence, they have been involved in many su-perlatives: the construction of the Burj Khalifa or in New York City, where two high-rise apartment blocks were built alongside the cathedral of St. John the Devine. The di-stance of the new 430 apartments to the fourth-largest Christian church in the world is maximum 12 meters, and as such called for extraordinary solutions. Using the self-climbing RS 850 tubular column system from Putzmeister, which is mounted in a ma nageable 1 × 1 m opening in the ceiling, a height of 140 meters was effortlessly overcome and 17.000 m³ of concrete flexibly placed.
Conclusion: MX stationary booms are desi-gned for all areas of the extensive industrial and high-rise construction sites, which are technically difficult to acces.
Achieve more with stationary booms for concrete placement
If you want to get to the top, you have to work your way up – from a solid base.
In line with this principle, MX stationary booms from Putzmeister are designed to meet all the challenges in construction.
Buildings are becoming taller and complex, and the demands placed on concrete con-veying are growing alongside. This cannot always be done by truck-mounted concrete pumps, as their reaches are limited too. An effective and exceptionally cost-effective alternative is to combine Putzmeister statio-nary concrete pumps with stationary booms.
This successful combination effortlessly bridges distances and ensures targeted and very efficient concrete placement. The MX modular system, through flexible combina-tions of booms and sub-structure with vari-ous attachment options and self-climbing devices, allow almost limitless potentials to be utilised.
54
Insertion and distribution Having the right balance
The MX system – optimum ratio of set up time and performance
The comprehensive, modular range of MX stationary booms offer differing reaches on the Putzmeister RS-850 tubular column system or on lattice towers of reputable manufactu-rers. Booms which, thanks to the quick disconnection system, can be moved in the shor-test possible time from the truck-mounted concrete pump to the tubular column and from there to the next one, allow an extreme amount of leeway both aloft and at surface level. Up to a reach of 42 m, they do not require counter weight, despite of a permissible free-standing height of up to 25,5 m.
Advantages of stationary concrete pumps
■ Particularly robust and wear-resistant
■ A complete concrete pump for high-rise construction in conjunction with the MX boom
■ Powerful performance for the high-rise and long-distance pumping of concrete (as powerful as truck-mounted concrete pumps)
■ Small set-up area required
■ Available with diesel and electric motors
■ Extensive, practically-orientated standard equipment and functional accessories
Additional brochure: Delivery line system PM 2300 BSA Stationary Concrete Pumps CT 2632
Stationary concrete pumps - high capacity, extremely efficient
Our comprehensive range of stationary concrete pumps offers the right solution for every application. The fully-developed pumps have already proven their convenient operability, reliability and durability in numerous extreme applications. So they rightly enjoy an excel-lent reputation on the market. This is not least down to the clever coordination of all com-ponents such as drive, long-stroke piston pump, free-flow hydraulics (FFH), S transfer tube and electronic control EPS (Ergonic® Pump System).
MX boom at a glance
TypeDelivery line Pipe - DN (mm)
End hosemax. (m)
Max. height without counterweight (m)
Arms Folding Reach (m)
Quick disconnection point
MXR 24-4 125 4 25.5 4 Z 23.8 –
MXR 29-4 125 4 22,5 4 Z 28.5 yes
MXR 32-4 125 4 19.5 4 Z 32.1 yes
MXR 35-4 125 3 19.5 4 Z 34.7 yes
MXG 42-5* 125 3 – 5 RZ 41.1 –
MXG 50-4* 125 3 – 4 R 49.9 –
Standard product construction on square tubular column RS 850, also possible on lattice tower. MXG 42-5 and MXG 50-4 only possible with lattice towers. * Upon request
76
Self-climbing formwork at a glance
■ Maximum safety for the entire construction site
■ Fast working times due to quickshuttering times
■ Placing boom integrated into the formwork
■ Harmonized cycle and climbing times
High-rise applications
Climber with the highest cost-efficiency
The perfect combination
Self-climbing formworks offer numerous ad-vantages. Maximum safety for construction site personnel and high cost-efficiency. Putzmeister produces for the formwork manufacturer, for example, all necessary calculations and layouts such as the load torque calculation.
If the stationary boom is integrated into self-climbing formwork, it is raised together with the complete formwork by a powerful hydraulic cylinder in a single stroke into the next section to be concreted.
In partnership with the customer and the formwork manufacturer, Putzmeister creates a perfect concreting concept. The ideal combination of formwork and placing boom is individually defined for each project. A MX boom can be inserted into the self-climbing formwork or into a self-climbing formwork platform. The self-climbing formwork is of-ten used for pre-running cores.
Pict
ure
sour
ce: P
ERI G
mbH
, Wei
ssen
horn
Pict
ure
sour
ce: D
oka
GmbH
, Am
stet
ten
Picture source: Doka GmbH, Amstetten
98
Energy application Infrastructure application
The system for the (sometimes) marked difference in size
MX stationary booms can be mounted on lattice towers of other renowned manufacturers.* This system is used predominately where a project calls for large reaches. So they can be seen, for example, in the construction of reservoir dams, power stations and liquid gas tanks. Or at widely extending construction sites, such as when building underground rail-ways and stations.
* Technical clarification and approval from Putzmeister required.
Systematic to a successful implementation
Consistent planning is a crucial success factor. And so Putzmeister engineers create a precise set-up plan in close collaboration with all project participants. Depending on the area to be concreted and the amount of concrete to be placed, the locations of the large booms are planned taking into account maximum reach and height, amongst other fac-tors. This gives the sequence in which and the frequency at which the booms must be moved.
Competent teamwork for all applications
Building the Nant de Drance power station in the Valais Alps, for example. Numerous Putzmeister machines were used for 17 km of tunnels with 1.7 million m³ of rubble. 5 stationary concrete pumps conveyed some 360 000 m³ of concrete using two MX 32-4 placing booms. The Putzmeister engineers had developed the concept for the concreting.
Benefits of lattice tower systems at a glance
■ Anchoring at structure for quick, freestanding mounting
■ Large free-standing heights
■ Pipelines are laid in the lattice tower, saving space
■ The rapid separation device between the boom pedestal and the lattice tower adapter allows the placing boom to be quickly set-up and dismantled
9
1
3
4
5
76
2
8
1110
The RS-850 tubular column system the upward trend
Step by step right to the top
The RS-850 tubular column system provides, as standard, columns in lengths of 1.5 m, 3 m, 6 m, 9 m or 10.5 m including the piping with DN 125 with a wall thickness of 7.1 mm concrete delivery lines. This makes parts replacement very uncomplicated. The erection of the boom pedestal* and the arm assembly is carried out on the identi-cal column sections, as for the sub-structure. Consequently, there is no need for spe-cial parts. Thanks to the practical double M tubular column profile, a simple quadratic opening of 1 x 1 m is required in the ceilings in order to reach the next floor.
* Putzmeister placing boom from the RS-750 system can be readily combined with the RS-850 tubular column system. Putzmeister offers an adapter for this purpose. So you can use all the benefits of the system with your existing arm assembly.
When climbing starts, the swing claw holds the placing boom up, while the lifting cylinder retracts for the next lift.
1 Climbing bar2 Catch for upper
climbing carriage3 Upper climbing carriage4 Climbing cylinder
5 Lower climbing carriage6 Catch for lower
climbing carriage7 Swivel claw8 Extending feet
The column that goes on and through the ceiling itself
Crane capacities on the construction site are in short supply. The MX boom from Putzmeister helps in this regard as it climbs automatically - via a lift cylinder. The Tubular columns in standard lengths 1.5 m, 3 m, 6 m, 9 m and 10.5 m Automatic climbing pro-cess with hydraulic climbing device hydrauli-cally driven climbing device integrated in the tubular column profile, pushes the tubular column gradually upwards. At the same time, the delivery line mounted on the tubu-lar column climbs too. Additional pipes can now be conveniently joined at the column end, while the tubular column can be sup-ported after each climb by the so-called ex-tending feet. When a process is completed, it can be repeated as often as required by pulling the climbing cylinder upwards by a cable winch along the rail. This method ena-bles the climbing device to climb automati-cally through several floors in a building.
The RS-850 system
■ Tubular columns in standard lengths 1.5 m, 3 m, 6 m, 9 m and 10.5 m
■ Automatic climbing process with hydraulic climbing device
■ Extending feet keep the tubular column secure on the slab
■ Simple column connection using re-usable pins
■ Adapter between tubular column RS-850 and boom pedestal RS-750 ensures compatibility
■ The structural variants of the tubular column adapt to each construction site
■ Quick disconnection system for improved transportation and quick set-up of the outrigger
■ Separable working platform for ease of transport
■ Climbing columns are available as 10.5 m or 1.5 m elements for high-rise projects with self-climbing device
Safety details that later latch into
Safety devices should also satisfy practical aspects. They must be quick to attach and be as compact as possible for transporta-tion. For this reason we have split the wor-king platform. One part can be pre-mounted on the tubular column for the construction site, while the other can be delivered sepa-rately and only needs to be latched in and secured.
An optional intermediate working platform, which is mandatory in certain countries, can likewise be readily attach ed to the tubular column in the shortest time. In addi-tion, ladder elements can be attached to the tubular columns. The safety back protection is removable to prevent it from becoming damaged while being transported or stored.
Set-up of a MX boom with the optional safety working platform
Ladder element with removable back protection
Base plates
Tubular column with slab guide
Slab guide with wedge
12 13
The Putzmeister quick disconnection systems allow placing boom to be quickly mounted and dismounted, flexibly relocated and transported more easily. For this reason, we offer the stationary boom MXR 32-4 with G4 disconnection points and the MXR 35-4 with G4/multi-disconnection points.
The G4 joint technology ensures quick and very easy mounting of the MXR 32-4 and MXR 35-4. It can be securely attached with only a few, simple hand grips and is then ready for immediate use.
The MXR 35-4 with multi-disconnection points can be used on truck-mounted concrete pumps as well as tubular columns or lattice towers. At the multi-boom disconnection point, the arm assembly can be removed from the boom pedestal in the shortest time.
The electric motor, all hydraulic components and the boom control are integrated into the boom pedestal.
Foundation The appropriate disconnection point
On a good foundation to aim high
The tubular column can be set up in several different ways depending on the construc-tion site specifications. Either one mounts the freestanding column on a cruciform base with ballast (1) or with anchor bolts (2), which are attached to the base plate. Or alterna-tively in the case of tight spatial conditions a compact cruciform base with a tie rod bas-ket (3) can be fixed to the base. If a base plate and ceiling are already completed, a cruciform base is no longer required. In this case, the tubular column is held from 4 base
plates (4) and ceiling corner brackets in the first ceiling over the base plate. In compari-son to the ceiling frame previously used, these are significantly lighter and more com-pact so that they can be easily carried. The concrete placing boom can also be integra-ted in a climbing formwork or slipform (6) de-pending on the construction site. Putzmeister has developed successfully im-plemented solutions through years of close cooperation with well-known international formwork manufacturers. In special cases
the stationary boom can also be attached using an anchoring (5) at the structure. It is thus possible to bypass heights up to 40 m freestanding. If the base is steady, the tubu-lar columns can be placed on top of one another. Instead of a long-winded and time-consuming bolted connection, for the RS-850 system the column parts are secured using reusable pins. They can be inserted and tightened by hand.
Cruciform base with ballast (1)
Anchor on the building structure (5)
Compact cruciform base anchored in the foundation with a tie-rod cage (when space is restricted) (3)
Cruciform base mounted on a shaft frame with tie-rods (6)
Attached on a base plate with anchors embedded in the foundation (2)
RS-850 with existing base plate and slab fixed with four base plates (4)
1514 15
A specialist rarely comes alone
Always the best solution – with the right teaming of lines and pumps
MX stationary booms are out and out team players. Together with stationary concrete pumps and delivery lines from Putzmeister, they ensure the highest efficiency for con-crete pumping and placement in every application.
Transfer tubes and stop valve
In high-rise construction it is very important, with pump pauses or before switch ing to another pipeline, that the delivery line can be closed off quickly and leak-free. The GV stop valves ot the M-series are stopped manually, while the H-series operate hydraulically. DVH transfer tubes permit feeding from a concrete pump from several pump lines.
Delivery lines for every application
Requirements for delivery lines vary depen-ding on medium, pump and conveying pres-sures. Putzmeister has delivery lines from the SK and ZX series with fully-developed coupling systems.
SK delivery lines are characterised by flexibi-lity, rotatability of the lines to the coupling stops and a possible displacement of up to 2° in the longitudinal direction.
Typical application areas are high-rise build-ings up to approx. 100 m high, long-distance conveying projects up to approx. 500 m and restricted inner city building projects.
ZX delivery lines impress through their leak tightness, high wear resistance, safe opera-tion by a fixed bolting of the coupling and a high pressure resistance. They are used, for instance, in high-rise concrete pumping to
600 m, such as in the construction of the Burj Khalifa, in long-distance conveying projects up to approx. 2 000 m and highly-abrasive concrete grades or concrete that is difficult to pump.
SK standard coupling system
Stop valve - GVM 2/2
Transfer tube – DVH 5/2
Stop valve - GVMH 2/2
Stop valve - GVH 2/2
ZX pump delivery system
■ Especially suitable for stationary pipeline use
■ Stable at pressures to 250 bar
■ Completely leak-proof
■ Rigid connection between the pipes
■ Non-axially rotating
The SK system
■ Standard delivery lines for placing booms
■ For pressures to 85 bar in the pumped medium
■ Special version highly wear-resistant to 130 bar
■ Axially rotating
The ZX Zentrifix system
Additional brochures: Delivery line systems PM 2300
1716
Simply a matter of design – from 24 to 50 m
MXR 29-4
Pedestal RSQuick disconnection point G4Delivery line DN 125 / 5.5“Arm, folding 4ZReach 32.1 mReach depth 28.4 mEnd hose length 4 mSwivelrange 540°Boom weight 5.0 tPedestal weight 2.5 t
Pedestal RS Quick disconnection point G4Delivery line DN 125 / 5.5“ Arm, folding 4ZReach 28.5 m Reach depth 25.3 m End hose length 4 mSwivelrange 540°Boom weight 4.5 tPedestal weight 2.5 t
All data represents theoretical maximum values. Dimensions configuration-dependent.
Length 10 600 mmWidth 1 900 mmHeight 2 400 mm
Length 11 300 mmWidth 1 900 mmHeight 2 450 mm
Length 10 730 mmWidth 2 430 mm*Height 3 780 mm
MXR 32-4
Pedestal GDelivery line DN 125 / 5.5“Arm, folding 5RZReach 41.1 mReach depth 35.4 mEnd hose length 3 mSwivelrange 365°Boom and pedestal weight 13 t
Pedestal GDelivery line DN 125 / 5.5“Arm, folding 4RReach 49.9 mReach depth 39.2 mEnd hose length 3 mSwivelrange continuousBoom weight 8 tMain carrier weight 9.5 tBallast carrier weight 2.4 tCounterweight 16 t
All data represents theoretical maximum values. Dimensions configuration-dependent.
Pedestal RSQuick disconnection point G4Delivery line DN 125 / 5.5“Arm, folding 4ZReach 34.7 mReach depth 28.0 mEnd hose length 3 mSwivelrange 540°Boom weight 5.6 tPedestal weight 2.5 t
MXG 42-5
MXG 50-4
MXR 35-4
You can plan better with our comprehensive range of MX stationary booms. Whether several booms with reduced reach or better a large boom - this depends on your application range. Single fixed mounting permits a boom with long reach, high conveying quantities to distribute over enormous areas.
Less range, therefore more flexibilityOutrigger with less reach which, due to the quick disconnection system, can be moved in the shortest possible time, offers extreme flexibility, not only in height but at surface level. It should also be noted considered that no counter ballast is required up to a reach of 42 m. The reduced space requirements also make working easier, particularly up through ceilings or shafts.
Multiplicity for the ideal concreting concept
Picture source: Doka GmbH, Amstetten
* width pedestal
MXR 24-4
Pedestal RS Delivery line DN 125 / 5.5“ Arm, folding 4ZReach 23.8 m Reach depth 20.9 m End hose length 4 mSwivelrange 365°Boom weight 3.9 tPedestal weight 2.1 t
All data represents theoretical maximum values. Dimensions configuration-dependent.
Length 7 990 mmWidth 2 522 mmHeight 2 515 mm
Length 9 860 mmWidth 1 850 mmHeight 2 400 mm
1918
Swift assistance, meaningful advice and a reliable supply of genuine Putzmeister accessories and parts - in over 120 countries worldwide. This is what we at Putzmeister understand as first-class service.
Ideally placed to support youWe train our service technicians continuously, provide a close-knit information network and the latest equipment and consistently strive to meet our customers‘ needs.
Thanks to state-of-the-art technology, our employees have all the relevant technical infor-mation about your machine at their fingertips, should the need arise. Allowing us to pro-vide you with the best possible support for emergencies, repairs or preventive mainte-nance.
Excellent in quality and customer proximityIn case of need, you have two options: Either the service team visits you or you take your machine to one of our service workshops. The latest tools, software analysis solutions and genuine parts ensure that your machine is operable again immediately.
All Putzmeister workshops and the work-shops of our international Putzmeister part-ners meet our high-quality standard. Especially when it comes to manufacturer‘s inspections and acceptance procedures in accordance with specifications.
Genuine parts for maximum availabilityIt goes without saying that we use only genuine Putzmeister parts in our workshops. This is the only way to guarantee consistent quality, checked for interoperability. And you can be absolutely sure that your machine meets the tough requirements with maximum performance and availability.
Build on Putzmeister – in service, parts, training
Everything that sets service apart
Our services for cost- effective work
The Putzmeister service support points offer you these services - all provided by
our experienced service staff:
Induction at handover – everything correct from the outset
So you and your machinist can adapt per-fectly to all special features and
innovations.
100 hours of customer service – avoid potential sources of error
With this customer service you receive a status report on your concrete pump as per
the Putzmeister service plan.
Customer training – benefit from expert knowledge
Practice-oriented learning offers many benefits: Your staff master the machine with
all its special features, use the machine to optimum effect, reduce
operating costs and avoid operating errors.
500 hours of customer service - protect your investment, retain your value
Our technical customer service team is the number one choice for checking the safety and
wear of your machine. You receive a status report for this, too.
Mandatory machine inspection – calculable costs instead of
incalculable failures
Visual inspection and functional check of components for 100 % safety. The hydraulic system with cylinders, electrical system and
core pump are also inspected.
For concrete pump operators■ Training and development seminars on
concrete pumps
■ Training and development seminars on PUMI with piston and rotor pumps
■ Regional/company seminars (in your re-gion or on your premises)
For concrete pump mechanics■ Training and development seminars on
concrete pump
For concrete pump machinists and mechanics
■ Practical days in Aichtal
■ Training: Handover and induction, on-the-job training
For workshop managers and foremen■ Overview of current developments in
Putzmeister concrete pumps
■ Qualification at the customer workshops for requisite maintenance work
Our range of training courses and seminars:
Further information can be found at: www.pm-akademie.de
The key benefits at a glance
Tech
nica
l cha
nges
and
err
ors
exce
pted
©
by
Putz
mei
ster
Con
cret
e Pu
mps
Gm
bH 2
020
Al
l rig
hts
rese
rved
P
rinte
d in
Ger
man
y (2
001S
c)
CT
2059
-14
EN
MX stationary boom
■ With or without counterweight*
■ Convenient transport and assembly as well as minimum set-up times through quick disconnection devices
■ Secure handling
■ Many mounting and attachment va-riants on the base plate, building or on a climbing formwork adapt to every construction site situation
■ Automatic climbing process with hy-draulic climbing device allows the boom to grow to the heights with the building
■ Reduced space requirement
■ Remote control via cable or radio al-lows precise and convenient operation
■ Single, 1 m2quadratic floor opening suffices for floor access way
■ Low-maintenance components
RS-850 system
■ Tubular columns in standard lengths 1.5 m, 3 m, 6 m, 9 m and 10.5 m
■ Climbing columns as 10.5 m or as 1.5 m elements for high-rise building projects with self-climbing device available
■ Extending feet keep the tubular column secure on the slab
■ Simple column connection: Reusable pins, which are inserted manually, ensure quick assembly
■ Adapter between tubular column RS-850 and boom pedestal R-750 ensures compatibility with the predeces-sor model
■ Divisible working platform for easier transport and safe mounting
* Up to 42 m reach without counterweight permissible, optional dependent on the configuration
Further brochures: Ergonic® CT 4690 Stationary concrete pumps CT 2632 Delivery line systems PM 2300
Putzmeister Concrete Pumps GmbH Max-Eyth-Straße 10 · 72631 Aichtal / Germany P.O.Box 2152 · 72629 Aichtal / Germany Tel. +49 (7127) 599-0 · Fax +49 (7127) 599-520 [email protected] · www.putzmeister.com