my activities at vecc during the last visit hemen kumar kalita gauhati university
DESCRIPTION
My Activities at VECC during the last visit Hemen Kumar Kalita Gauhati University Special thanks to: Partha Pratim Bhaduri (VECC) . 1. Outline : # First I've tried to read the mcpoints i.e. the information from the input files and get the position co-ordinates of the corresponding - PowerPoint PPT PresentationTRANSCRIPT
My Activities at VECC during the last visit
Hemen Kumar KalitaGauhati University
Special thanks to: Partha Pratim Bhaduri (VECC) 1
Outline: # First I've tried to read the mcpoints i.e. the information from the
input files and get the position co-ordinates of the corresponding mcpoints and by looping over all the mcpoints generated the following plots:
● Distribution of mcpoints
● x vs y and r distributions.
# Plots of Hit Efficiency per layer.(where Hit Efficiency =no. of Hits/no. of mcpoints)
# Plots of position resolution.
2
All the plots are generated for 1K Pluto and embedded events
3
4
For pluto For embedded
5
For pluto
For embedded
Layer # 1
Front side of Layer # 1
6
For pluto
7
x vs y dist. for layer # 1
For embedded
Front side of layer # 1 Back side of layer # 1
8For embedded
9
For embedded eventsFor pluto
Layer # 1 Front side of Layer # 1
10
For pluto
Front side of layer # 1
Layer # 1
11For embedded events
12
For pluto
For embedded
Front side of layer # 1
Layer # 1
13For pluto
layer # 1 Front side of layer # 1
14For embedded
Hit Efficiency per layer =no. of Hits per layer / no. of mcpoints per layer
15
For pluto
16
Hit Efficiency per layer =no. of Hits per layer / no. of mcpoints per layer
For embedded
Float_t delx = (x_mcp – x_h); // position resolution for x
Float_t dely = (y_mcp – y_h); // position resolution for y
Float_t delz = (z_mcp – z_h); // position resolution for z
* ' *_h represent the position of the hit and * ' * _mcp represent the position of the associated mcpoint.
17For pluto
18For pluto
19
Float_t delx = (x_mcp – x_h); // position resolution for x
Float_t dely = (y_mcp – y_h); // position resolution for y
Float_t delz = (z_mcp – z_h); // position resolution for z
* ' *_h represent the position of the hit and * ' * _mcp represent the position of the associated mcpoint.
For embedded
20For embedded
Summary:-
# Now I can read the information from the input files i.e. mcpoints, mctracks and extract
track parameters from there.
# Can generate all the plots for each layer i.e. station by station.
# Can get the track ID and get the corresponding Pdgcode of the track.
# Can calculate hit efficiency per layer and plot the graph
# Can get the position resolution and compare the distribution of mcpoints with the associated mcpoints of the hits.
21
Thank You