n33ma absolute type battery less 42bit multi turn electrical … · 2020. 6. 12. · hirose...

1
64 65 N33MA Model ABSOLUTE TYPE Ugtkcn Rtqvqeqn Jwd uetgy 5 < O5 rkvej 207 6 < O6 rkvej 209 7 < 7Xł32' 9 < 9 vq 34X Qrgtcvkpi Xqnvcig –00E D < Dkuu/E U < UUK M < TU/6:7 Jcnh/fwrngz N33MA–M42 Eqorn{kpi ykvj TqJU Model Dimension Mounting N33MA 24bits 18bits 5V ± 10% or 7 to 12V < 12000 min -1 < 1s Resolution Current Consumption(No load) Supply Voltage Electrically Permissible Speed Initialization Time Multi turn Single turn 65mA Max (5v) 55mA Max (7v) Storage Temperature Operating Temperature Vibration Shock Relative Air Humidity (Non-Condensing) Electrostatic Discharge (Module level) – 40 + 115℃ – 40 + 115℃ 90%RHTamb = 60˚C10G; 10 to 2000Hz 6ms; Half Sine; 200G ± 4kV Receiver (P/N:ISL3283E) Transmitter (P/N:ISL3295E) Shift Clock (SCLK) Data Output (DAT) Interface Circuit Interface Circuit Interface Circuit SSI Receiver (P/N:ISL3283E) Transmitter (P/N:ISL3295E) Serial Clock(MA) Serial Data(SLO) BiSS-C Receiver (P/N:ISL3283E) Transmitter (P/N:ISL3295E) Serial Data (DAT) Serial Data (DAT) RS-485 Pin No 1 2 3 4 5 6 7 8 9 10 SSI GND VDD SCLKSCLKDATDATSPI CLK SPI DO SPI DIN GND BiSS-C GND VDD MAMASLOSLONC(1) NC(1) NC(1) GND RS-485 GND VDD NC NC DATADATANC(1) NC(1) NC(1) GND Mechanical Permissible Speed System Accuracy (With electrical correction) Shaft Play Axial Radial ± 313 Arc-sec < 12000 min -1 ±0.2mm ±0.05 mm Electrical Spec Mechanical Spec. Data communication Environmental Spec. Connection M3 Hub screw M4 Hub screw PCD 26.5 Ø 33.00 ±0.1 M4 14 ±0.5 4.6 ±0.1 8 ±0.2 Ø 6.500 -0.005 -0.020 g7 20.00 max M3 5 ± 0 .2 1.56 ± 0 .1 14 ± 0 .5 Ø 6.000 +0.040 +0.025 20.00 max PCD 26.5 Ø 33.00 ± 0 .1 Note (1): Do not connect during operation Recommended mating connector: Hirose Part No: DF13-10S-1.25C (CL No.536-0006-8) Hirose (Terminal Pin for Wire 26~30AWG): DF13-2630SCF (CL No.536-0300-5) [Note] There are an Alignment Fixture and an Accuracy calibration station (SSI, Biss-C or RS-485) available separately. Please contact our Sales for inquiries about this product of details. M3 Hub screw M4 Hub screw A 0.05 A 0.01 A 0.01 A Section A-A C0.5 TYP M4x0.7 Depth 8 Min 0.4 Ø6.500 +0.015 0 H7 Ø10 h8 3.4 ±0.3 8.00 ±0.05 Ø11.0 min 1.0 min 60 ~ A A Ø0.2 A Ø 0.2 A 4X M2X0.4 2X Ø2.5 ± 0.1 Depth 2 1.09 12.42 12.42 12.45 12.5 4.0 13.25 13.25 + + A 0.01 A 0.01 A Section A-A C0.2 TYP M3x0.5 Depth 6 n 11.0 min Ø6.000 0 -0.008 h6 Ø3.5 ±0.1 1.0 min 1.56 ±0.1 1.6 Ø 0.2 A Ø 0.2 A A A 4X M2X0.4 2X Ø2.5 ±0.1 Depth 2 1.09 12.42 12.42 12.45 12.5 4.0 13.25 13.25 + + Battery less 42bit Multi turn •Module type •Full Magnetic

Upload: others

Post on 01-Feb-2021

0 views

Category:

Documents


0 download

TRANSCRIPT

  • 64 65

    N33MA ModelABSOLUTE TYPE

    – –00EN33MA–M42Model

    Dimension

    Mounting

    N33MA

    24bits

    18bits

    5V ± 10% or 7 to 12V

    < 12000 min-1

    < 1s

    Resolution

    Current Consumption(No load)

    Supply Voltage

    Electrically Permissible Speed

    Initialization Time

    Multi turn

    Single turn

    65mA Max (5v)55mA Max (7v)

    Storage Temperature

    Operating Temperature

    Vibration

    Shock

    Relative Air Humidity(Non-Condensing)

    Electrostatic Discharge (Module level)

    – 40 ~ + 115℃

    – 40 ~ + 115℃

    90%RH(Tamb = 60˚C)

    10G; 10 to 2000Hz

    6ms; Half Sine; 200G

    ± 4kV

    Receiver(P/N:ISL3283E)

    Transmitter (P/N:ISL3295E)

    Shift Clock(SCLK)

    Data Output(DAT)

    Interface Circuit Interface Circuit Interface CircuitSSI

    Receiver(P/N:ISL3283E)

    Transmitter (P/N:ISL3295E)

    SerialClock(MA)

    SerialData(SLO)

    BiSS-C

    Receiver(P/N:ISL3283E)

    Transmitter (P/N:ISL3295E)

    Serial Data(DAT)

    Serial Data(DAT)

    RS-485

    Pin No123456789

    10

    SSIGNDVDDSCLK−SCLK+DAT−DAT+SPI CLKSPI DOSPI DINGND

    BiSS-CGNDVDDMA−MA+SLO−SLO+NC(1)NC(1)NC(1)GND

    RS-485GNDVDDNCNCDATA−DATA+NC(1)NC(1)NC(1)GND

    Mechanical PermissibleSpeed

    System Accuracy(With electrical correction)

    Shaft PlayAxial

    Radial

    ± 313 Arc-sec

    < 12000 min-1

    ≦±0.2mm

    ≦±0.05 mm

    Electrical Spec

    Mechanical Spec.

    Data communication

    Environmental Spec.

    Connection

    M3 Hub screw

    M4 Hub screw

    PCD 26.5

    Ø 33.00 ±0.1

    M4

    14 ±0.5

    4.6 ±0.1

    8 ±0.2 Ø 6.500-0.005-0.020 g7

    20.00 max

    M3  5 ± 0 .2

    1.56 ± 0 .1

    14 ± 0 .5

    Ø 6.000 +0.040+0.025

    20.00 max

    PCD 26.5

    Ø 33.00 ± 0 .1Note (1): Do not connect during operation

    ※Recommended mating connector: Hirose Part No: DF13-10S-1.25C (CL No.536-0006-8) Hirose (Terminal Pin for Wire 26~30AWG): DF13-2630SCF (CL No.536-0300-5)

    [Note]There are an Alignment Fixture and an Accuracy calibration station (SSI, Biss-C or RS-485) available separately.Please contact our Sales for inquiries about this product of details.

    M3Hubscrew M4Hubscrew

    A

    ◎ 0.05 A⊥ 0.01 A

    ⊥ 0.01 A

    Section A-A

    C0.5 TYP

    M4x0.7 Depth 8 Min

    0.4

    Ø 6.500 +0.015 0 H7

    Ø 10 h8

    3.4 ± 0.38.00 ±0.05

    Ø 11.0 min

    1.0 min

    60 ~

    A A

    Ø 0.2 A

    Ø 0.2 A4X M2X0.4

    2X Ø 2.5 ± 0.1 Depth 2

    1.09

    12.4212.42

    12.45

    12.5 4.0

    13.2513.25

    +○+○

    A

    ⊥ 0.01 A

    ⊥ 0.01 A

    Section A-A

    C0.2 TYP

    M3x0.5 Depth 6

    n 11.0 min

    Ø 6.000 0-0.008 h6

    Ø 3.5 ± 0.1

    1.0 min

    1.56 ± 0.1

    1.6

    Ø 0.2 A

    Ø 0.2 A

    A A

    4X M2X0.4

    2X Ø 2.5 ±0.1 Depth 2

    1.09

    12.4212.42

    12.45

    12.5 4.0

    13.2513.25

    +○+○

    Battery less 42bit Multi turn •Moduletype•FullMagnetic