name of teaching staff : dr. k.n. vijaya kumar
TRANSCRIPT
Name of Teaching Staff : Dr. K.N. Vijaya Kumar
Designation : Professor & Head,
Department : Mechanical Engineering Date of Joining the Institution : 18.9.2012
Qualifications with Class/Grade : 1. Ph.D (Tech.) Mechanical Engg. University of Mumbai, 2008
2. M.E. (Mech.) Machine Design, SPCE with Ist Class (69.00%), 2001.
3. M.E. (Mgmt.) SJCE with Ist Class (61.00%), 1990. 4. B.E. (Mech.) P.D.A.LOE with Ist Class (71.81%), 1987.
5. D.M.E. Govt. Polytechnic, Bellary.
Total Experience in Years : Teaching: 25 Years
1. Professor, D.J.Sanghvi College of Engineering from 18-9-2012 till date. 2. Professor & Vice Principal – SIT Lonavala from Jul’2011 to 17-9-2012. 3. Professor & Head SIT Lonavala from Jan’10 to Jul’11. 4. Assistant Professor, Fr. CRCE from May’09 to Dec’09
5. Lecturer (Sl. Grade) Fr.CRCE Jan’98 to Apr’09 6. Lecturer VESIT from Jun’93 to Dec’97.
7. Lecturer Fr. CRCE Jan’93 to Jun’93. 8. Lecture SESCOE Jan’90 to Sep’92.
Industry: ----
Research: ---
Papers Published:
National: 9 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, “Quality improvement in Manufacturing – A Data mining approach” Proceedings of National Conference on Management Science and Practice, IIT Chennai 9-11, March 2007. 2. Dr. K.N. Vijay Kumar, Mr. M. Ravindran, Mr.Rajit R. Nair, “Quality Aspects in Manufacturing a Deodorizer – A Case Study”, Journal of Indian Institute of Industrial Engineering, XXVI No. 9, September 2007, Pg 35-38.
3. Dr. Arun Kumar, Dr. S.S. Mantha, Dr. K.N. Vijay Kumar, Sahij Singh Gadu, “Quality Improvement using Statistical Process Control – A Case Study”, Journal of Indian Institute of Industrial Engineering, XXXVI No. 10, October 2007, Pg 27-31.
4. Gautam V. Divekar, Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, “Rejection Analysis Based on First Pass Yield – A Case Study”, Journal of Indian Institute of Industrial Engineering, XXXVI November 2007, Pg 31-36.
5. Dr. K.N. Vijay Kumar, A D Lonkhande Investigation into feasibility of establishing Remanufacturing Industry, Proceedings of NCTIME 2010, K.K. Wagh college of Engg. 5-6 Oct 2010. 6. KavitaDhanawade, V.K. Sunnapwar, HanamantDhanawade, B.A. Mujawar, Dr. K.N. Vijay Kumar, Thermal analysis of solid and perforated extended surface by forced convection – an overview, JP Journal of heat and mass transfer Vol. 5 No. 2, 2011, pp, 133-147.
7. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K., “Lossless compression in artificial images” Proceedings of VIT National Conference 2012 Recent Advances and Challenges in Engineering and Management” Mumbai, March 2-3 2012.
8. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Measurement System Analysis for Improving Quality – A Case Study”, Journal of Indian Institute of Industrial Engineering, Accepted for publication.
9. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “uncertainty in Measurement – A Review”, Journal of Indian Institute of Industrial Engineering, Accepted for publication.
International: 5 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “MCUSUM Control Charts for improving Quality”, Proceedings of International Conference on Advanced Manufacturing Technologies, CMERI Durgapur, 29-30, November 2007.
2. Dr. K.N. Vijay Kumar, Suhasini K.V. Spatial, “Data mining application to traffic analysis” Proceedings of International Conference Applications – 2010. Pondicherry, 24-27 Dec, 2010.
3. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Simulation of a Shortest Path using Pixel Method in Robotics Path Planning” International Conference and workshop on Emerging Trends in Technology is published in ICWET2 proceedings with IJCA on March 09, 2012.
4. Dr. K.N. Vijay Kumar, Dhanawade H.S. Thermal Analysis of perforated fin arrays and arrays with cross fin at centre an Overview International Journal of Emerging Technologies and application in Engg., Technology and sciences, ISSN No. 0974-3588, Vol. 4 Issue 2 Page 182-187.
5. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Control of Stationary Robots using Visual Basic Software” International Conference and workshop on Emerging Trends in Technology is published in ICWET2 proceedings with IJCA on March 09, 2012.
Papers Presented in Conferences:
National: 5 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Six Sigma and Statistical Methods in R & D and Manufacturing”, 48th National Convention of Multidimensional Concepts and Approaches for Continual Improvement in the E-Millennium, Indian Institute of Industrial Engineering Bangalore, September 29-30 2006
2. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Lalit Prasad, “Multivariate capability indices for Quality improvement – A review”, National Conference on Trends in Advance Manufacturing NCAM (2007) at Fr. CRCE Bandra, Mumbai, 19th – 20th October 2007.
3. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Template matching techniques using pattern recognition concepts” National Conference on Computer, Communication and Information Technology (NC3IT 2012) Pandharpur, on 18-19 Feb, 2012.
4. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Development of a jacobian matrix for vertical axes robots” National Conference on Computer, Communication and Information Technology (NC3IT 2012), Pandharpur on 18-19 February 2012.
5. T.C. Manjunath, Dr. K.N. Vijay Kumar, Suhasini V.K. “Separation of foreground & Background objects in image proceedings” VIT National Conference 2012 Recent Advances and Challenges in Engineering and Management, Mumbai, March 2-3, 2012.
International: 3 1. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Quality Improvement Using Multivariate Statistical Process Control”, International Conference on Quality Management Practices for Organizational Excellence, by ITM and NCQM at ITC Grand Central Parel, Mumbai, 16th & 17th August, 2007.
2. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “MEWMA Control Charts for Complex Processes”, International Conference on Advances in Manufacturing Engineering at Manipal Institute of Technology, Manipal, Karnataka 24-26 October 2007.
3. Dr. K.N. Vijay Kumar, Dr. S.S. Mantha, Dr. Arun Kumar, “Measurement system analysis with attribute data – A case study” 9th International Symposium on Management and Quality Control, Indian Institute of Technology, Chennai, November21-24 2007.
PhD Guide? Give field & : Field: TQM.WCM,----
University University: ---Pune,
Mumbai,JJTU,Pecific- PhDs / Projects Guided : PhDs : 1
Projects at Masters level: 4
Books Published / IPRs / Patents
Professional Memberships : ISNDT
Indian Institution of Industrial Engineering
ISTE,ISME
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Dr. C. M. Choudhari
Designation : Professor
Department : Mechanical Engineering
Date of Joining the Institution : 24.03.2017
Qualifications with Class / Grade : Ph. D.(Metal Casting) (2015) V.J.T.I, Mumbai, Mumbai
University.
M.E. (Machine Design), V.J.T.I, Mumbai, Mumbai
University, Distinction, 2003.
B.E. (Mechanical Engg), Prof. Ram Meghe College
of Engineering Badnera, Amaravati University, 1997.
Total Experience in Years : Teaching:
Professor in Mechanical Engineering Department, D. J. Sanghvi College of Engineering from 24.03.2017 to till date. Worked as Associate Professor in Mechanical Engineering Department, Fr. Conceicao Rodrigues Institute of Technology, Vashi, Navi Mumbai from July 2016 to March 2017.
Worked as Assistant Professor in Mechanical Engineering Department, Fr. Conceicao Rodrigues Institute of Technology, Vashi, Navi Mumbai from January 2004 to July 2016.
Worked as Lecturer in Mechanical Engineering Department, Fr. Conceicao Rodrigues Institute of Technology, Vashi, Navi Mumbai, from February 1998 to December 2003.
Industry:
Worked as Vendor Development Engineer, in Motilal
Omprakash Works, Pune, from June 1997 to December
1997.
Research
Papers Published: A. International Journals(Total Citations Received: 52) 1. Choudhari C. M., Patil V. D., “Product
Development and its Comparative Analysis by SLA,
SLS and FDM Rapid Prototyping Processes”,
International Journal of Physics: Materials
Science and Engineering (MSE), doi:10.1088/1757-
899X/149/1/012009).
2. Choudhari C M, B E Narkhede, “Improvement of
Mould Yield in Sand Castings Process using Multi
Cavity Approach” submitted paper to International
Journal of Manufacturing Technology and
Management, from Inderscience Publishers (Paper
ID-IJMTM-147756). 3. Choudhari C. M., B. E. Narkhede, and S. K.
Mahajan, “Methoding and Simulation of LM 6 Sand Casting for Defect Minimization with its
Experimental Validation”, Elsevier Procedia Engineering, Vol. 97, pp 1145-1154, 2014.
4. C M Choudhari, B E Narkhede and S K Mahajan,
“Numerical Simulation of Long Cylindrical Shape Sand Casting with its Experimental Validation”, Elsevier Proceedings, Vol. 1, pp 243-248, 2014.
5. Choudhari C. M., B. E. Narkhede, and S. K.
Mahajan, “Casting Design and Simulation of Cover Plate Using AutoCAST-X Software for Defect Minimization with Experimental
Validation”, Elsevier Procedia Materials
Science, Vol. 6, pp 786-797, 2014. 6. C M Choudhari, B E Narkhede and S K Mahajan,
“Modeling and Simulation for Optimum Design and Analysis of Riser in Sand Casting with Experimental
Validation”, Journal of Applied Mechanics and Materials, Vol.465-466, pp 657-661, 2014.
Published by Trans Tech Publications, Switzerland.
7. C M Choudhari, B E Narkhede and S K Mahajan,
“Modeling and Simulation with Experimental
Validation of Temperature Distribution during Solidification Process in Sand Casting”, International Journal of Computer Applications, Vol 78(16) (ISBN: 973-93-80877-81-0), pp 23-29, 2013.
8. C M Choudhari, B E Narkhede and S K Mahajan, “Defect free casting by using simulation software”,
Journal of Applied Mechanics and Materials, Vol. 313-314, pp 1130-1134, 2013. Published by Trans Tech Publications, Switzerland.
9. A K Gajbhiye, C M Choudhari, D N Raut, B E Narkhede, B M Bhandarkar, “Minimization of
Shrinkage Porosity in A Sand Casting Process by Simulation in AUTOCAST-X Software with Experimental Validation by Destructive testing” at
International Journal of Modern Engineering
Research, ISSN: 2249–6645, Vol. 4, pp. 18- 27,
2014.
10. A R Narwade, C M Choudhari, B E Narkhede,
“Feeder design and analysis by casting simulation
software” at International Journal of Informative &
Futuristic Research, ISSN: 2347-1697, Vol. 1 no.9,
pp 281-291, May 2014.
Papers Presented in B. International Conferences (12) Conferences:
1. Choudhari C. M., Patil V. D., “Product Development
and its Comparative Analysis by SLA and FDM Rapid
Prototyping Processes”, International Conference on
Science and Technology for Sustainable Development
(ICSTSD-2016), May 2016.
2. C M Choudhari, B E Narkhede and S K Mahajan, “A
hybrid approach for casting process simulation by
combining FEM and VEM for defect minimization
with experimental validation”, 62nd Indian Foundry
Congress (IFC 2014), Ahmedabad, during 7th -9th
February, 2014, India.
3. C. M. Choudhari, B. E. Narkhede, and S. K.
Mahajan, “Optimum design and analysis of riser for
sand casting” Industrial Engineering and Engineering
Management (IEEM), 2013 IEEE International
Conference held at Bangkok TBD TH, pp. 1151-
1155, 2013.
4. D M Wankhede, C M Choudhari, Dr B E Narkhede,
“A Critical Study on Casting Defects in Light Metals”,
International Conference on Industrial Engineering
(ICIE-2013), organized by S.V. National Institute of
Technology, Surat, during 20th -23rd November 2013,
ISBN: 978-93-83083-4, pp 929-934, India.
5. C M Choudhari, B E Narkhede and S K Mahajan,
“Finite Element Simulation of Temperature
Distribution during Solidification in Cylindrical Sand
Casting with Experimental Validation” 4th
International and 25th All India Machine Tool Design
and Research (AIMTDR 2012), organized by
Jadavpur University, Kolkata, during 14th -16th
December 2012, Vol 1, pp 1-6, India.
6. C M Choudhari, B E Narkhede and S K Mahajan,
“Modeling and Simulation of Solidification in Metal
Casting for Defect Minimization” jointly organized by
Department of Science and Technology, Govt. of
India, New Delhi and Japan Society for Promotion
of Science, Tokyo (DST-JSPS) on
MANUFACTURING, DESIGN and INNOVATION
held at Indian Institute of Technology, Bombay
during 3rd - 8th December, 2012, India. 7. C M Choudhari, B E Narkhede and S K Mahajan,
“Characterization and Correction of Casting Defects by
Using Process Improvement Tool” at International
Conference on Recent Advances In Engineering,
Technology And Management (SPICON 2012), during
31st May- 2nd June 2012, Mumbai, India. 8. C M Choudhari, V D Patil “Direct Integration of
Reverse Engineering and Rapid Prototyping For Product Development” at International Conference on
‘Frontier in Mechanical Engineering, (FIME2010)
organized by National Institute of Technology,
Suratkal, pp 255-260, India. 9. C M Choudhari, B E Narkhede, “An Integrated
Approach to Product Development for Rapid Tooling
Based on Rapid Prototyping” at 2nd International
Conference on Production and Industrial Engineering
(CPIE-2010) organized by Dr. B. R. Ambedkar
National Institute of Technology, Jalandhar, Punjab, pp
316-320, India. 10. C M Choudhari, V D Patil, “Design and Development
of Vacuum Clamping System” in International
Conference on Advances in Machine Design and Industry Automation (ICAMDIA-2007) organized by
Govt. College of Engineering Pune in association with
corporate during 10-12 January 2007, pp.137-141,
India. 11. S M Khot, C M Choudhari, Nitesh P Yelve, Jitendra
K Sardar, “An Effect of System Parameters on Natural
Frequency of Beams by Using Statistical Method” 2nd
International Conference on ‘Computational
Mechanics and Simulation’ (ICCMS-06), Indian
Institute of Technology, Guwahati, during December
8-10, 2006, Vol. 1, pp 453-459, India. 12. C M Choudhari, Nitesh P Yelve “A Futuristic Study
on Harnessing Wind Energy”, International Conference
on Wind Energy: Trends and Issues (WETI 2006),
NITTTR Bhopal, during January 5-7, 2006, TP II/29-TP II/35, India.
National: --- C. National Conferences and Consortium (9)
1. Participated in the TEQIP II sponsored PhD colloquium
(Poster presentation), organized by V.J.T.I, Mumbai
during March 3-4, 2014.
2. Participated in the TEQIP II sponsored PhD colloquium
(Poster presentation), organized by V.J.T.I, Mumbai
during April 15-16, 2013.
3. Participated in the A National Level Doctoral
Consortium for Research Scholars organized by
V.J.T.I, Mumbai in association with Indian Institution
of Industrial Engineering (IIIE), Educ-Asia Ltd &
S.O.A. University Bhubneswar, January 11, 2013.
4. Participated in the A National Level Doctoral
Consortium for Research Scholars organized by
V.J.T.I, Mumbai in association with Indian Institution
of Industrial Engineering (IIIE), Educ-Asia Ltd during
March 12-16, 2012.
5. Presented a poster at Poster presentation for Research
Scholars organized by V.J.T.I, Mumbai on February
29, 2012. 6. N N Deshmukh, C M Choudhari, “Continuous
Temperature Monitoring System In Engineering
Application Using NI Lab View” in the Global conference on ‘Production and Industrial Engineering’
(CPIE – 2007) organized by Dr. B. R. Ambedkar
National Institute of Technology, Jalandhar, Punjab
during March 22-24, 2007, pp. 116-120, India. 7. S M Khot, C M Choudhari, Nitesh P Yelve, Jitendra
K Sardar, “An Investigation on Effect of System
Parameters on Natural Frequency of Cantilever Beam by Using Taguchi Method and ANOVA” in the
National Conference on Emerging Trends in
Mechanical Engineering (ETIME- 2006) organized by
B.M.S. college of Engineering, Bangalore during
February 11-12, 2006, pp. 77-83, India. 8. N Venugopal, C M Choudhari, Nitesh P Yelve “An
Investigation on Vibration Characteristics of Visco-
elastic Materials by Using Taguchi Method, ANOVA
and Factor Plots ” in the National Conference in Recent
Advances In Manufacturing Technology (RAMT-2006)
organized by Velammal Engineering College, Chennai
on 3rd
February 2006, pp. 106-111, India. 9. N Venugopal, C M Choudhari, Nitesh P Yelve, “An
Investigation on Vibration Characteristics of Visco-
elastic Materials by Using Taguchi Method and
ANOVA” in the National Conference on Recent
Trends In Manufacturing (NCRTM-2006) organized by
K.I.T.’S College Engineering, Kolhapur, during 7-8
January, 2006, pp. 90-94, India.
Details of Short Term Courses Attended (17): 1. One week AICTE sponsored Faculty Development
Programme on “Fundamentals of Project
Management”, organized by V.J.T.I., Mumbai during
February 24-28, 2015.
2. One week TEQIP II sponsored Short Term Course on
“Research Methodology”, organized by V.J.T.I.,
Mumbai during February 3-7, 2014.
3. One week TEQIP sponsored Staff Development
Programme on “Project Management for Industry”,
organized by V.J.T.I., Mumbai during January 12-16,
2014.
4. One week TEQIP II sponsored Faculty Development
Programme on “Program Management Tools and
Techniques” organized by V.J.T.I., Mumbai during
August 22-26, 2013.
5. One week TEQIP II sponsored Faculty Development
Programme on “CFD in
Engineering domain using Computing Softwares”
organized by V.J.T.I., Mumbai during July 8 -12,
2013.
6. One week TEQIP II sponsored Faculty Development
Programme on “Recent trends in Finite Element
Method and Introduction to Boundary element and
Mesh Free Method”, organized by V.J.T.I., Mumbai
during February 18-22, 2013.
7. One week TEQIP II sponsored Faculty Development
Programme on “Industrial Engineering Tools and
Techniques”, organized by V.J.T.I., Mumbai during
March 12-16, 2012.
8. One week Training Programme on “Research
Methodology: Tools and Techniques” organized by
Indian Institute of Roorkee during December 12-16,
2011.
9. One week AICTE sponsored Staff Development
Program on “Advances in the Manufacturing and
Micromachining Techniques”, organized by V.J.T.I.,
Mumbai during November 14-18, 2011.
10. One week Quality Improvement Programme on
“Rapid Product Development” organized by I.I.T.
Guwahati during December 11-15, 2006.
11. One week Quality Improvement Programme on
“Computer Aided Design and Manufacturing”
organized by I.I.T. Guwahati during December 12-16,
2005.
12. One week Quality Improvement Programme on
“Finite Element Analysis & Signal Processing in
Rotating Machineries” organized by I.I.T. Guwahati
during December 19-23, 2005.
13. Two week Short Term Training Programme on “Computer Integrated Product Design and
Manufacturing” (CIPDM)” organized by Karunya
Institute of Technology And Sciences, Deemed
University, Coimbatore during October 25-November
5, 2004.
14. One week Quality Improvement Programme on
“Innovative Tribo - Design” organized by I.I.T. Bombay during November 15-19, 2004.
15. One week Short Term Training Programme on “Concurrent Engineering - A Modern Approach to
Product Development” organized by S.R.K.R.
Engineering College, Bhimavaram, during December
27-31, 2003.
16. Two week Short Term Training Programme on
“Advanced Computational Techniques [ACT-2003]”
organized by L.D. College of Engineering,
Ahmedabad, during December 1-12, 2003.
17. One week training Programme in Rolta India Ltd. on
“Introduction to Pro/E wildfire 2.0” during July 11-15, 2003.
PhD Guide : Approved Ph. D. Guide in Mumbai University.
Field: Mechanical Engineering
University University of Mumbai
PhDs / Projects Guided : Presently guiding 2 students at the Fr CRIT, Vashi, Research
Centre, University of Mumbai
Projects Guided at Post Graduate level /Masters level: 10
Projects Guided at Graduate level: 22
Books Published / IPRs / Patents
Professional Memberships :
Life Member, Indian Society for Technical Education (ISTE) (LM 46481).
Life Member, Indian Institution of Industrial
Engineering (IIIE) (LM 9391). Consultancy Activities :
Awards : --
Grants fetched : Achieved a Minor Research Grant Sanction of Rs.30,000/- for the project titled “Simulation and Experimental Study of minimization of shrinkage defect in casting” in the year 2014-15 (Ref No.: APD/237/351 of 2014, 13 October, 2014.
Interaction with :
Professional Institutions
Name of Teaching Staff : Prof. Prasad S. Shirodkar Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 11.7.2011
Qualifications with Class / : 1. M.E. (Mechanical Engg.) ,Ist Class with distinction (72.77 %)
Grade from University Of Mumbai in April, 2002.
2. M.S. (Mechanical Engg.), GPA: 3.60 from Michigan Technology
University, Houghton, MI.
3. B.E (Mechanical Engg.) ,Ist Class from University of Mumbai in
January, 1999.
Total Experience in Years : Teaching: 7 Years
1. Assistant Professor, D.J. Sanghvi College of Engineering from 11.7.2011 till date
2. Lecturer, Sardar Patel Institute of Technology, from July, 2010 to May, 2011.
3. Lecturer ,Sardar Patel College of Engineering, from 2007 to 2010. 4. Part-Time Intern, Helwig Carbon Products, Inc., Milwaukee, WI
from November, 2006 to March, 2007. 5. Teaching/ Research Assistant, Michigan Technological University,
Houghton, Michigan from September, 2004 to August, 2006. 6. Lecturer, K.J. Somaiya Institute of Engg. & Information
Technology from October, 2001 to June, 2004.
Industry: ----
Research: ---
Papers Published: International: 3 1. Kumar V, D.J. Bee, P.S. Shirodkar, B.P. Bettig and J.W. Sutherland, “Towards Sustainable Product & Material Flow Cycle: Identifying Barriers to Achieving Product Multi-use and Zero Waste”, Proc. of ASME Manufacturing Engineering Division, 2005, (IMECE2005-81347), appeared on CD-ROM.
2. Shirodkar P.S., V.Kumar. M.E. Jarvie& J.W. Sutherland,” Exploring Value Flow in the Product Life cycle to Promote Successful Value Recovery,” Proceedings of Sustainable Manufacturing IV-Global Conference on Sustainable Product Development and Life Cycle Engineering, Sao Carlos, Sao Paulo, Brazil, 2006, paper # LCA02.
3. Kumar.V, P.S.Shirodkar, J.A. Camelio& J.W. Sutherland, “Value Flow Characterization during Production Lifecycle to Assist in Recovery Decisions, “International Journal of Production Research, vol.45, no.8,2007, pp.4555-4572.
National: ---
Papers Presented in Conferences: International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ---- Projects at Masters level: ----
Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : 1. Henes Fellowship: Fall 2005 2. Appointed Graduate Scholar of Sustainable Futures Institute.
3. IGERT Associate (NSF funded 5-year project): Spring 2005-
Spring 2006.
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof.Vyankatesh U. Bagal Designation : Assistant Professor
Department : Mechanical Engineering Date of Joining the Institution : 11.7.2012
Qualifications with Class / Grade : 1. M.E. (Heat Power Engg.) Shivaji University, 75.49%, May –
2007.
2. B.E. (Mechanical Engg.) Shivaji University, 69.67%, Jul –
2002.
Total Experience in Years : Teaching: 5 Years 1. Assistant Professor, D.J. Sanghvi College of Engineering from 11.7.2012 till date.
2. Assistant Professor, St. John College of Engineering &
Technical from Jun’ 2010 to Jun’ 2012.
Industry: 5 Years 1. Deputy Manager – Mahindra & Mahindra Ltd, from Aug’ 2006
to Jun’ 2010. 2. Production Engineer – Elle Elec Pvt Ltd, from Apr’ 03 to
Jun’04.
Research: ---
Papers Published: International: ---
National: ---
Papers Presented in Conferences:
International: Bagal, V. and Mulemane, A., "Aerodynamic Drag Simulation and Validation of a Crossover," SAE Technical Paper 2010-01-0757, 2010, doi:10.4271/2010-01-0757.
National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----
Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof. Rajnarayan Yadav Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 2.7.2012
Qualifications with Class / Grade : 1. M.Tech. – Banaras Hindu University, First Class, May – 2009.
2. B.E. (Mechanical Engineering), University of Mumbai, First Class, May – 2005.
Total Experience in Years : Teaching: 3 Years 1. Assistant Professor, D.J. Sanghvi College of Engineering from 2.7.2012 till date.
2. Assistant Professor, PVPP College of Engineering, from
Feb’ 2012 to Jun’ 2012.
3. Asst. Professor – JSS Academy of Technical Education,
from Apr’ 2011 to Feb’ 2012.
4. Asst. Professor – ITS Engineering College Gr. Noida, Oct’
2009 to Apr’ 2010.
Industry: 1 year
Enginemates Heat Transfer
Ltd.,Mulund,fromjune2006tojune2007
Research: ---
Papers Published:
International: --- National: ---
Papers Presented in Conferences: International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ---- Projects at Masters level: ----
Books Published / IPRs / Patents Professional Memberships : --
Consultancy Activities : -- Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof Prashant Frank Crasta
Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 22.07.2013
Qualifications with Class / Grade : M.Tech., Materials (Science) Engg, KREC, Mangalore University, 71%, I Class Distinction ,1994 B.E. Metallurgical Engg, KREC, Mangalore University, 67%, I Class, 1991.
Total Experience in Years : Teaching:
Assistant Professor in D.J. Sanghvi College of Engg. from 22.07.2013 to till date.. Associate Professor SMVITM,Udupi From August 2012 to July 2013. Associate Professor MIT-Kundapura From Sept 2011 to August 2012.
Industry: Manager, Mukand Ltd., Thane From Sept 1996 to August 2011
Engineer, Bhandary Industrial Metals Ltd. Goa From: August 1995 to August 1996. Graduate Engineer Trainee Automotive Axles Ltd., Mysore, From: August 1994 to August 1995 and Sept 1991 to June 1992 Research : Papers Published:
International: ---
National: --- P. Frank Crasta, S. C. Kuiry, Amit Ganguly, “Effect of Tempering on Destabilized Microstructure of Ni-Hard”, in Transactions of Indian Institutes of Metals Vol. 52, No. 5, October 1999 Chirag Gandhi, P Frank Crasta, K N Vijay Kumar, “Improving Quality Parameters of Steel Balls Affecting Noise in Ball Bearing”, International Research Journal of Engineering and Technology (IRJET) ISSN : 2395-0056, Volume 3, Issue 6, June 2016. Chirag Gandhi, P Frank Crasta, K N Vijay Kumar, “Study of Vibration Generated in Steel Balls Creating Noise in Ball Bearings”, International Research Journal of Engineering and Technology (IRJET) ISSN : 2395-0056, Volume 3, Issue 6, June 2016. Kavita Thakur, P Frank Crasta, “Enhancing Ink Mileage”, International Journal of Research in Engineering and Applied Science (IJREAS) ISSN : 2249-3905, Volume 6, Issue 6, June 2016,. Kavita Thakur, P Frank Crasta,“Utility of Six Sigma Application”, International Research Journal of Engineering and Technology (IRJET) ISSN : 2395-0056, Volume 3, Issue 8, June 2016.
Papers Presented in Conferences:
International: --- “Effect of Tempering on Destabilized Microstructure of Ni-Hard Ring Casting”,
in Asian Foundry Congress at Calcutta in 1999. National: --- “Optimization Techniques a Review”, at MHSSCOE, Mumbai, 2014. PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----02 Books Published / IPRs / Patents
Professional Memberships : --Life Member of Indian Society for
Technical Education (ISTE) Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof. Dhaval Birajdar Jinadatt Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution 09.07.2013
Qualifications with Class / Grade : 1. B.E. (Mechanical), University of Mumbai, Ist class,
62.53% , September 2009
2. M.E. (Thermal), University of Mumbai, Ist class 61.53%,
September 2012
Total Experience in Years : Teaching:
1. Assistant Professor in D.J. Sanghvi College of Engg. from 09-07-2013 till date.
2. Assistant Professor in St. Franics Institute of Technology
From: 2nd July, 2012
Industry:
1 year experience as Project Engineer
Research: ---
Papers Published:
International: --- National: ---
Papers Presented in Conferences: International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ---- Projects at Masters level: ----
Books Published / IPRs / Patents Professional Memberships : --
Consultancy Activities : -- Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof Vinit Katira Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 08.07.2014
Qualifications with Class / Grade : M.E. Thermal Engg., Sardar Patel College of Engg., August
2013
B.E. Mechanical Engg., Mumbai University, May 2011
Total Experience in Years : Teaching:
1. Assistant Professor inD.J. Sanghvi College of Engg. from 08-07-2014 till date.
Industry:
1. Research Assistant, I.I.T. Bombay, Mumbai, from July
2013- July 2014.
Research: - “Experimental and numerical investigations on
melting and solidification of pure lead in rectangular and
cylindrical enclosures”
Papers Published:
International: --- National: ---
Papers Presented in Conferences: International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ---- Projects at Masters level: ----
Books Published / IPRs / Patents Professional Memberships : --
Consultancy Activities : -- Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Rohitkumar Chaurasia
Designation Assistant Professor :
Department Mechanical Engineering Department :
Date of Joining the Institution 05/01/2015 :
Qualifications with Class / Grade : M.E. (Machine Design) With First class
B.E. (Automobile Engineering) First class with Distinction
Total Experience in Years : Teaching:4 Years 5 month
Industry:1 year
Research: --
Papers Published: International: --- National: --- Design analysis and Experimental verification of Torispherical and Toriconical bottom pressure vessel
Papers Presented in Conferences: International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ---- Projects at Masters level: ----
Design analysis and Experimental verification of Torispherical and Toriconical bottom pressure vessel
Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : PATANKAR PRASHANTKUMAR RAMESH
Designation : ASST. PROFESSOR
Department : MECHANICAL ENGG.
Date of Joining the Institution : 21/01/2015
Qualifications with Class / Grade : M.E.-Mechanical(Machine Design)
Total Experience in Years : Teaching: 17 Years
Industry:01Year
Research: --
Papers Published:
International: --- National: --- 01
Papers Presented in Conferences: International: ---
National: --- 01
PhD Guide? Give field & : Field: ---- University University: ----
PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----
Books Published / IPRs / Patents Professional Memberships : --
Consultancy Activities : -- Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Mr. Ramesh R. Rajguru
Designation : Assistant Professor
Department : Dept. of Mechanical Engg.
Date of Joining the : 12.07.2011
Institution
Qualifications with Class / : (1) Ph.D. (Mechanical Engg.) Pursuing.
Grade
(2) M.E. (Mechanical Engg.), Dec. 2013, Ist class, 69.20%,
Mumbai University.
(3) B.E., Sardar Patel College of Engineering from Mumbai
University, First Class with distinction (82.55%).
Total Experience in Years : Teaching: 06 years and 06 Months
1. Assistant Professor in Mechanical Engg. From 04-07-
2012 till date.
2. Lecturer in Mech. Engg., Dwarkadas J. Sanghvi College
of Engg. from 12-07-2011 till 30-06-2012.
3. Visiting lecturer in Mechanical Engineering, Sardar Patel
College of Engineering from 29-7-2010 to 29-04-2011.
Industry: 03 years
1. Worked as Production Officer in Production Sub-
Assembly, Department of 118NE Car, PAL-PEUGEOT
Ltd. Dombivli from 02/05/1995 to 30/06/1997.
2. Worked as Production Engineer at Aero -Tech Ducon
India Pvt. Limited at TTC Rabale, Nav Mumbai from
01/07/1997 to 30/06/1998.
Papers Published in : National:-- 01
Journals
(1) “A Review of Machining Processes and Machinability in
the case of GFRP Composite Materials” in IPI journal (The official publication of Indian Plastics Institute), August/September 2013,Vol.18, issue 3, ISBN 978-81-927125-0-5 (with Dr. Hari Vasudevan).
International :-- 09
1) "Optimization Of Multi-Performance Characteristics in the
Turning Of GFRP(E) Composites using Principle Component Analysis combined with Grey Relational Analysis” accepted
for publication in Elsevier Materials today Proceedings and
presented in ICMPC (International Conference on Material
Processing and Characterization) held during 17th to 19th
March 2017 at Gokaraju Rangaraju Institute of Engineering
and Technology,Hyderabad (With Dr. Hari Vasudevan, and
Kalpesh).
2) “Grey Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites” in Elsevier Journal “Procedia Engineering” vol. 97 (2014) pp. 85 – 94 (doi: 10.1016/j.proeng.2014.12.228) (with Dr. Hari Vasudevan and Naresh Deshpande)
3) “Multiobjective Optimization of Drilling Characteristics
for NEMA G -11 GFRP/Epoxy Composite using Desirability
Coupled with Taguchi Method ” in Elsevier Journal
“Procedia Engineering” vol. 97 (2014) pp. 522 – 530 (doi:
10.1016/j.proeng.2014.12.278) (with Dr. Hari Vasudevan and
Naresh Deshpande)
4) “A study on Edge Milling Operation of NEMA G11 GFRP Composites based on Grey-Taguchi method” in the international journal Applied Mechanics and Materials -
ISSN:660-9336, (doi:10.4028/www.scientific.net/AMM.592-594.18) Vols. 592-594 (2014) pp.18-22, (with Dr. Hari
Vasudevan and Naresh Deshpande)
5) “Desirability Fuzzy Multiple criteria Optimization of
Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites” in Elsevier published Journal “Procedia Material Science” Vol. 5 (2014) pp. 2458 – 2467 (with Dr.
Hari Vasudevan and Naresh Deshpande). DOI: 10.1016/j.mspro.2014.07.497
6) “Experimental Investigation and Optimization in Edge Milling of NEMA G-11 GFRP/Epoxy Composites” presented
in Elsevier published Journal “Procedia Material Science” Vol. 5 (2014) pp. 2105 – 2114 (with Dr. Hari Vasudevan and Naresh Deshpande). DOI: 10.1016/j.mspro.2014.07.546
7) “Investigation of the Machinability Characteristics of GFRP/ Epoxy Composites using Taguchi Methodology” in
the international Journal of Applied Mechanics and Materials
(AMM) Vol. 612 (2014) pp 123-129, as a special volume
titled “Advanced Research in Design, Manufacturing and
Materials”. Published by Trans Tech Publications Ltd
Switzerland,(doi:10.4028/www.scientific.net/AMM.612.123)
(with Dr. Hari Vasudevan and Naresh Deshpande).
8) “Investigation of the machinability characteristics of
GFRP/vinyl ester composite using design of experiments ”, in
the International Journal of Machining and Machinability of
Materials: Special issue on Machining of Advanced
Materials, Inderscience 2014, Vol.15, No.3/4, pp.186 – 200
ISSN (Online): 1748-572X - ISSN (Print): 1748-5711. (with
Dr. Hari Vasudevan and Naresh Deshpande) DOI: 10.1504/IJMMM.2014.060549
9) “Exploring the performance of a Single Cylinder Diesel
Engine with alternative fuels such as CME and CME-Diesel Blends” in the International Journal of Current Engineering
and Technology, InPressco International Press Corporation, Vol. 3, Issue 3, pp.1-4, ISSN 2277-4106 (with Dr. Hari
Vasudevan, Sandip Mane and Naresh Deshpande).
Papers Published in : National:-- 02
conferences (1) “Delamination in Machining of Composite Materials: A
Review in the Context of Drilling Operation” in the National
Conference on Emerging Trends in Engineering, NCETE-13,
during 4th & 5th January 2013, organized by M.H.Saboo
Siddik College of Engineering, Byculla, Mumbai.
International :-- 17
1) “Grey Fuzzy Multiple Criteria Optimization of Process Parameters for CNC turning of GFRP/Vinyl Ester Composites”, presented at 1st International Conference on
Materials, Manufacturing and Design Engineering. (ICMMD -2016) held at Dr. Babasaheb Ambedkar Technological
Universit, Lonere, Maharashtra, India, during December 20-21, 2016. (with Dr Hari Vasudevan and Naresh Deshpande) 2) “Multiple Criteria Optimization of Process Parameters
for Edge Milling of NEMA G11 Composites using Desirablity
Function Analysis”, presented at 1st International Conference
on Materials, Manufacturing and Design Engineering.
(ICMMD-2016) held at Dr. Babasaheb Ambedkar
Technological Universit, Lonere, Maharashtra, India, during
December 20-21, 2016. (with Dr Hari Vasudevan and Naresh
Deshpande)
3) “Optimization of Cutting Parameters for Surface
Roughness in Machining of GFRP Composites”, presented at
6th International & 27th All India Manufacturing
Technology, Design and Research Conference (AIMTDR-
2016) held at College of Engineering Pune, Maharashtra
India, during December 16-18, 2016. (ISBN: 978-93-86256-
27-0) (with Dr. Hari Vasudevan, Naresh Deshpande, Kalpesh
Tank and Aman Tukrel). 4) “Optimization of Material Removal Rate and Cutting Forces in Turning of GFRP composites” in the 6th International & 27th All India Manufacturing Technology,
Design & Research Conference (AIMTDR–2016) held at
College of Engineering, Pune during 16-18 December 2016 (With Dr. Hari Vasudevan, Kalpesh and Mandar). 5) “Solar Energy a Viable Alternative: A Review” in ICAME2015 held during 15th & 16th of October 2015,UCEV, Villupuram, Vol1, ( with Punit Sanghavi, Chirag Pandya and Raj Hemani). 6) “Optimization of turning parameters for Glass Fibre Reinforced Plastic (GFRP/E) using Grey Relational Analysis coupled with Taguchi method” in ICAME2015 held during 15th & 16th of October 2015,UCEV, Villupuram, Vol1, (Kalpesh N. Tank, Mandar S. Rao, Rahil S. Sheth). 7) “Utility Fuzzy Multiobjective Optimization of Process Parameters for CNC Turning of GFRP/Epoxy Composites”,
presented at 5th International & 26th All India
Manufacturing Technology, Design and Research
Conference (AIMTDR-2014) held at Indian Institute of
Technology Guwahati, Assam, India during December 12-14,
2014. (ISBN: 978-8-19274-610-4) (with Dr. Hari Vasudevan
and Naresh Deshpande)
8)“Experimental Investigation and Optimization of Milling
Parameters in the Machining of NEMA G -11 GFRP
Composite Material using PCD Tool” , presented in the
International conference on All India Manufacturing Technology, Design and Research (AIMTDR-2014) held at
Indian Institute of Technology Guwahati, Assam, India during December 12-14, 2014. (ISBN: 978-8-19274-610-4)
(with Dr. Hari Vasudevan and Naresh Deshpande)
9)“Utility Fuzzy Multicriteria Optimization of Process Parameters in CNC Turning of GFRP/ Vinyl ester Composites” presented in the ICMMM2014 conference held
at Indian Institute of Technology Madras, Chennai, during August 8-9, 2014. (ISBN 978-93-80689-18-0) (with Dr. Hari
Vasudevan and Naresh Deshpande)
10) “Grey fuzzy optimization of milling parameters for G-11
GFRP/Epoxy composites with multiple performance
characteristics” presented in the ICMMM2014 conference
held at Indian Institute of Technology Madras, Chennai,
during August 8-9, 2014. (ISBN 978-93-80689-18-0) (with
Dr. Hari Vasudevan and Naresh Deshpande)
11)“Multi Criteria Decision Making using Fuzzy Inference System : A Case in Manufacturing” presented in the ICCICCT
2014 conference organized by Noorul Islam centre for higher
education, Noorul Islam university, Kumaracoil, Tamilnadu,
India, from July 10-11, 2014. pp.1280 – 1286. (ISBN: 978-1-
4799-4191-9) (doi:10.1109/ICCICCT.2014.6) (IEEE Xplore)
(with Dr. Hari Vasudevan and Naresh Deshpande)
12)“An Experimental Investigation into the Optimization of Cutting Force in CNC Turning of Woven Fabric based GFRP/Epoxy Composites using PCD Cutting Tool” presented
in the International Conference on Design, Manufacturing and
Mechatronics organized by Trinity college of engineering and
research Pune, Maharashtra, from 9th – 10th Jan.2014 . (with
Dr. Hari Vasudevan and Naresh Deshpande)
13)“An Experimental Study on the Performance and Emission Characteristics of a Single Cylinder Diesel Engine Using CME-Diesel Blends”, in the International Conference on Renewable Energy and Sustainable Development (ICRESD- 2014) organized by KJEI’s Trinity College of Engineering and Research, Pune from 9th to 10th January 2014 (with Dr. Hari Vasudevan, S. Mane and Naresh Deshpande).
14) “Analysis of a Multi-criteria optimization problem using
Taguchi and Grey relational analysis: A case study in the
machining of composite materials” in the International
Conference on Advances in Mechanical Engineering organized
by the department of Mechanical Engineering, College of
Engineering Pune, Maharashtra, from 29th-31st May 2013 .
(with Dr. Hari Vasudevan and Naresh Deshpande)
15)“Study of Cutting Force in CNC Turning of Woven Fabric
based GFRP/Vinylester Composites using PCD Cutting
Tool” in the International Conference on Advanced
Manufacturing and Automation (INCAMA-2013, ISBN 978-
93-80686-50-9) organised by the Department of Mechanical
Engineering (DST-FIST Sponsored) Kalasalingam
University, Madurai, Tamil Nadu from the 28th-30th March
2013 . (with Dr. Hari Vasudevan and Naresh Deshpande)
16)“Multi-criteria optimization using Taguchi and Grey
relational analysis in CNC drilling of GFRP/E composite
material” in the International Conference on Advanced
Manufacturing and Automation (INCAMA-2013, ISBN 978-
93-80686-50-9) organised by the Department of Mechanical
Engineering (DST-FIST Sponsored) Kalasalingam
University, Madurai, Tamil Nadu from the 28th-30th March
2013. (with Dr. Hari Vasudevan and Naresh Deshpande)
17)“Recent Trends and Developments in the use of Woven
Fabric Reinforcements for Composite Materials” in the
International Conference on Innovations in Automation and
Mechatronics Engineering 2013 (ICIAME-2013,ISBN 978-
81-924744-03), organised by G.H.Patel College of
Engineering & Technology, Vallabh Vidyanagar, Gujarat,
India, 21-23 February 2013. (with Dr. Hari Vasudevan and
Naresh Deshpande)
Research Grants : Received University of Mumbai Minor Research Grant (Sr.
No. 388) of ₹ 45000 during 2015-16, for project titled “Grey
Relational Analysis for Minimising Surface Roughness of
Milled NEMA GII GFRP Plates” (with Dr. Hari Vasudevan).
Professional Memberships : Life Member of I.S.M.E. (Indian Society of Manufacturing
Engineers).
Reviewer : Indian Journal of Engineering & Materials Sciences,
Publisher: National Institute of Science Communication and Information Resources Dr K S Krishnan Marg, New Delhi 110
012, INDIA.
Guest Lecture / : 1. Delivered an Expert talk on “Components of Composites
Technical Talk and Manufacturing Processes of Composites” at Shri
Bhagubhai Mafatlal Polytechnic, VileParle west, Mumbai.
Name of Teaching Staff : Prof. Pavan Rayar
Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 06.01.2016
Qualifications with Class / Grade : M.E . CADCAM AND ROBOTICS
7.41 (FIRST CLASS) BE MECHANICAL
79.52 (DISTINCTION) Total Experience in Years : Teaching:
05 years Lecturer in Vidyavardhinis college of Engineering 01 years
D J Sanghavi college of Engineering till date
Research :
Papers Published:
International: ---
National: ---
Papers Presented in
Conferences: International: --- Design analysis and testing of Aerofoils for high lift at low Reynolds number: A Review
National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ---- Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof. Bronin Cyriac
Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 04.01.2016
Qualifications with Class / Grade : M.E. Thermal Engineering, PIIT, Mumbai University, 8.81
CGPI, 2015.
B-Tech. Mechanical Engineering, AJCE, MG University, 73%, 2011.
Total Experience in Years : Teaching: 5 years
1. Assistant Professor in DJSCE from January 2016 to till date.
2. Assistant Professor in SCOE from July 2015 to December 2015
3. Assistant Professor in LTCOE from July 2014 to April 2015
4. Lecturer in VESIT from July 2013 to July 2014 5. Lecturer in PIIT from July 2012 to July 2013
6. Lecturer in VESIT from August 2011 to July 2012
Industry:-
Research :
Papers Published:
1. Bronin Cyriac, Prof. A.G. Shaligram, Prof.
MD Nadar " CFD Modelling of finned tube gas cooler
for transcritical operation of CO2systems" International Journal of Mechanical Engineering and Robotic
Research, Vol. 4, No.1, January 2015 ISSN: 2278-0149.
International: --- 2. Bronin Cyriac, M.D. Nadar, A.G. Shaligram, “Effect of
operating parameters on the performance of fin and
tube gas cooler for trans-critical operation of CO2 heat pumps”, International Journal of Advanced Technology
in Engineering and Science (ISSN: 2348-7550), Volume No 03, Special Issue No. 01, September 2015
National: ---
Papers Presented in
Conferences:
1. Bronin Cyriac, M.D. Nadar, A.G. Shaligram, “Effect of
operating parameters on the performance of fin and
tube gas cooler for trans-critical operation of CO2 heat
International: --- pumps”, 2nd International Conference on Science, Technology and Management (ICSTM-15), ISBN: 978- 81-931039-6-8 , University of Delhi (DU), Conference
Centre, New Delhi, September,2015.
National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----
Books Published / IPRs / Patents Applied for patent for the project Pepper
Separator (Patent File No:1979/CHE/2013)
Professional Memberships : --
Consultancy Activities : --
Awards : --
Funding of one lakh by NSTEDB, DST
Grants fetched : Government of India for the project
‘Pepper Separator’. Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof Greegory Mathew
Designation : Assistant Professor Department : Mechanical Engineering
Date of Joining the Institution : 11.01.2016
Qualifications with Class / Grade : M.Tech. Machine Design, SPCE, Mumbai University,
9.38 CGPI, 2015. B.E. Mechanical Engg, VCET, Mumbai University, 62%,
May 2010. Total Experience in Years : Teaching:
Assistant Professor in Sardar Patel College of Engg from 05-06-14 to 31-12-15 Assistant Professor in D.J. Sanghvi College of Engg. from 11-01-2016 to till date. Industry: 1 year as Trainee engineer, Evergreen Engineering Co. Pvt. Ltd. 1 year as Project trainee, Larsen and Toubro EAIC.
Research :
Papers Published:
International: --- Reliability estimation of moulded case circuit breaker through experimental degradation analysis, International Journal on Mechanical Engineering and Robotics, Volume-4, Issue-1, 2016, ISSN (Print) : 2321-5747. (with Krishna Gaikwad)
National: ---
Papers Presented in
Conferences: International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ---- Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof. Dhananjay S. Shukla
Designation : Assistant Professor Department : Mechanical Engineering
Date of Joining the Institution : 05.01.2015
Qualifications with Class / Grade : 1. M.Tech (Mechanical Engineering with specialization in
Thermal Engineering, 1st Class with Distinction (9.8CPI),
1st in VJTI - Gold Medalist, University of Mumbai, July
2013. 2. B.E. (Mechanical Engineering), 1st Class with Distinction (79.50%), 6th Rank in University of Mumbai, 1st Rank in
S.S. Jondhale College of Engineering, University of
Mumbai, May 2010.
Total Experience in Years : Teaching: 4.1 years 1. Assistant Professor, Dwarkadas J. Sanghvi College of Engineering from 05.01.2015 till date. 2. Assistant Professor, Konkan Gyanpeeth College of Engineering from 10.01.2014 to 22.08.2014. 3. Assistant Professor, A.C. Patil College of Engineering from 05.08.2013 to 23.12.2013. 4. Lecturer, S.S. Jondhale College of Engineering from
21.09.2010 to 19.06.2011. Industry: ----------------
Research : -----
Papers Published: International: --- Journal “Experimental Study of Iodine Removal Efficiency
In Self-Priming Venturi Scrubber” published in Annals of
Nuclear Energy. Ms. Ref. No.: ANUCENE-D-14-00260R2.
National: --- ----- Papers Presented in
Conferences: International: --- -----
National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----
Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : Won FIRST Prize in Essay competition
(at school level) in the year of 2002
organized by Kalyan Rotary Club.
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff :Prof. Kartik Ajugia
Designation : Assistant Professor Department : Mechanical Engineering
Date of Joining the Institution : 04/01/2016
Qualifications with Class / Grade : M.Tech Thermal SPCE, Mumbai University, 8.02 CGPI,
2016. B.E. Mechanical KJSCE, Mumbai University, 60.4%, May 2009.
Total Experience in Years : Teaching:
Lecturer in SJCET from 16/06/2010 to 31/12/2015 Assistant Professor in D.J. Sanghvi College of Engg. from 04/01/2016 to till date. Industry: 1 year as a Production Engg in EBCO Pvt Ltd.
Research :
Papers Published:
International: --- Numerical comparison of the Tube Bank Pressure Drop using a Conventional Nozzle position and an Inline Nozzle
position of a Shell and Tube Heat Exchanger National: ---
Papers Presented in Numerical Analysis of the Tube Bank
Conferences: Pressure Drop of a Shell and Tube Heat
Exchanger
International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ---- Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff :Prof. Shashikant Auti
Designation : Assistant Professor Department : Mechanical Engineering
Date of Joining the Institution : 09.01.2017
Qualifications with Class / Grade : M.Tech – Mechanical (Automobile), (V.J.T.I.) Mumbai,
Mumbai University, 7.8 CPI, 2014. B.E. Mechanical Engineering, SCOE, Pune, University of
Pune, 67%, 2011. Total Experience in Years : Teaching: 04 yrs
Veermata Jijabai Technological Institute : As a Teaching Assistant 2012 – 2014 Marathwada Mitramandal's College of Engineering : As a Lecturer 2014 – 2015 Forbes Marshall, Kasarwadi Pune : Instructor for preparatory Classes for M.tech Entrance Exam (Sponsored Quota), May and June 2015 MITAOE, Alandi, Pune : As an Assistant Professor 2015 – 2016
Industry: 01 yrs Piaggio Vehicles Private LTD. Baramati, Pune : As Graduate Engineer Trainee (GET) 2011 – 2012
Research : Automotive Shredder Residue Treatment
and Recycling of ELV
Papers Published:
International: --- 1.“Homogeneous Charge Combustion Engine” in International Journal of Global Technology Initiatives (ISSN No. Print/Online : 2277-6591 / 2320-1207 ) Volume 3, Issue 1,
March 2014 National: ---
Papers Presented in
Conferences: International: --- 1.“Homogeneous Charge Combustion Engine” in
International Journal of Global Technology Initiatives (ISSN No. Print/Online : 2277-6591 / 2320-1207 ) Volume 3, Issue 1,
March 2014 National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ---- Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof. Ravikant S. Hattale
Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 09.01.2017
Qualifications with Class / Grade : M.Tech. (Industrial Metallurgy), NIT Warangal, CGPA, 2016 B.E. (Mechanical Engg.), Shivaji University, 63.93%, May 2013
Total Experience in Years : Teaching:
Assistant Professor in D.J. Sanghvi College of Engg. From 09-01-2017 till date.
Industry:
Research : One year research experience at CSIR-CGCRI (Central Glass and Ceramic Research Institute), Kolkata.
Papers Published:
International: ---
National: ---
Papers Presented in
Conferences:
International: --- Synthesis and Characterization of Molybdenum doped spin coated Nanostructured V2O5 thin films, International Conference on Ceramic and Advanced Materials for Energy
and Environment, Christ University , Bangalore, 14th
-17th
December 2015, page 136-137.
National: --- Novel Soft Chemical Synthesis of Transition Metal Doped Smart Thin Films, National Conference on Recent Trends in Functional Materials in Relation to Nanotechnology and Nanomaterials (RTFMNN), Saint Paul College, Kolkata, 4
th -
5th
February 2016, page-216. PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----
Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff :Prof Sachin Kamble
Designation : Assistant Professor Department : Mechanical Engineering
Date of Joining the Institution : 20.07.2015
Qualifications with Class / Grade : M.Tech. Automobile Engg, V.J.T.I, Mumbai University,
7.3 CGPI, 2014. B.E. Mechanical Engg, SVERI COE Pandharpur, Solapur
University, 67%, May 2012. Total Experience in Years : Teaching:
Assistant Professor in D.J. Sanghvi College of Engg. from 20-07-2015 to till date. Industry:
Research :
Papers Published:
International: ---
National: ---
Papers Presented in
Conferences: International: ---
National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ---- Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof (Ms) Shreya Kadwadkar Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 06.07.2013
Qualifications with Class / Grade : B.E. Mechanical Engg., Shivaji University, 69% May 2002
Total Experience in Years : Teaching: 1. Assistant Professor inD.J. Sanghvi College of Engg. from 06-07-2013 till date.
2. Lecturer, Thakur College of Engg. from August 2011 - June 2013
Industry: 1. Sr. Executive ProjectsGodrej & Boyce Mfg Co.
Ltd.,From July 2007 to October, 2008 2. Sr. Technical Consultant3D Engineering, July 2004 to July
2007 3. Assembly Supervisor, Hirlekar PrecisionFrom July 2002
to June 2004 .
Research: --- Papers Published: International: --- ‘Optimization Of Turning Process Parameters In The Machining Of An Accumulator (Mdn-250) Using
Taghuchi’s Design Of Experiments’, International Journal of Mechanical and Production Engineering
(IJMPE), Volume-3,Issue-5 (May, 2015), Online ISSN 2321-2071, Print ISSN 2320-2092.
National: ---
Papers Presented in Conferences: International: --- “Contribution of DOE in the field of Turning process optimization”, in the international conference on Eco-Friendly Technologies for Sustainable Growth (ICEFT-14) National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ---- Projects at Masters level: ----
Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with Professional : --
Institutions
Name of Teaching Staff
: Prof. Saurabh Vichare
Designation : Assistant Professor Department : Mechanical Engineering
Date of Joining the Institution : 08.07.2014 Qualifications with Class / Grade : M.E. Mechanical Engg, DJSCE, Mumbai University,
8.91 CGPI, 2016. B.E. Mechanical Engg, RGIT, Mumbai University, 67%
May 2011.
Total Experience in Years : Teaching: Assistant Professor in D.J. Sanghvi College of Engg. from
08-07-2014 to till date. Industry: 1.5 year as Reliability Engineer at ACG Pam Pharma
Technologies PVT Ltd.
Research :
Papers Published:
International: --- National: --- Papers Presented in
Conferences: International: --- Article on Lean Manufacturing: A step Towards
Green Future in International Conference of Eco
Friendly Technology For Sustainable Growth National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----
Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof Aditya M. Jawlekar Designation : Assistant Professor
Department : Mechanical Engineering
Date of Joining the Institution : 14/07/2014
Qualifications with Class / Grade : M.E. Mechanical Engg, Mumbai University, 8.53 CGPI 2016
B.E. Mechanical Engg., Mumbai University, 70% May 2012
Total Experience in Years : Teaching:
Assistant Professor in D.J. Sanghvi College of Engg. from 08-07-2014 till date.
Industry:
Worked as a Production Engineer in Gearbox company for period of one year.
Papers Published:
International: --- National: ---
Papers Presented in Conferences:
International – An Overview of Total Productive Maintenance & Overall Equipment Efficiency,in International Conference of Eco Friendly Technology for Sustainable Growth National: ---
PhD Guide? Give field & : Field: ----
University University: ----
PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ----
Books Published / IPRs / Patents Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions
Name of Teaching Staff : Prof. Dharam V. Ranka
Designation : Assistant Professor Department : Mechanical Engineering
Date of Joining the Institution : 08.07.2014
Qualifications with Class / Grade : M.E. Mechanical Engg, DJSCE, Mumbai University,
9.01 CGPI, 2016. B.E. Automobile Engg, MHSSCE, Mumbai University, 72%, May 2011.
Total Experience in Years : Teaching:
Assistant Professor in D.J. Sanghvi College of Engg. from 08-07-2014 to till date. Industry: 1 year as Technical Advisor, NMPL
Research :
Papers Published:
International: --- 1. Suspecting Dominant Variable That Causes Porosity Defect in a Cast Made up of Aluminium Alloy (LM2) Using Shainin’s DoE Approach, International Journal of Advances in Mechanical and Civil Engineering, Volume-3, Issue-5, Oct, 2016, ISSN: 2394-2827. (with Khavekar Rajendra and Dr. Hari Vasudevan)
2. Optimization Of Turning Process Parameters In The Machining Of An Accumulator
(mdn-250) Using Taghuchi’s Design Of Experiments, International Journal of
Mechanical And Production Engineering, Volume- 3, Issue-5, May-2015, ISSN: 2320-
2092. (with Dr. Hari Vasudevan and Prof. Shreya Kadwadkar)
National: ---
Papers Presented in
Conferences: International: --- 1. Suspecting Dominant Variable That Causes Porosity Defect in a Cast Made up of
Aluminium Alloy (LM2) Using Shainin’s DoE Approach, International Journal of Advances in Mechanical and Civil Engineering, Volume-3, Issue-5, Oct, 2016, ISSN: 2394-2827. (with Prof. Khavekar Rajendra and Dr. Hari Vasudevan)
2. Optimization Of Turning Process Parameters In The Machining Of An Accumulator
(mdn-250) Using Taghuchi’s Design Of Experiments, International Journal of Mechanical And Production Engineering, Volume- 3, Issue-5, May-2015, ISSN: 2320-
2092. (with Dr. Hari Vasudevan and Prof. (Mrs.) Shreya Kadwadkar)
National: ---
PhD Guide? Give field & : Field: ----
University University: ---- PhDs / Projects Guided : PhDs : ----
Projects at Masters level: ---- Books Published / IPRs / Patents
Professional Memberships : --
Consultancy Activities : --
Awards : --
Grants fetched : --
Interaction with : --
Professional Institutions