20nm Nano Ceramic Coating Technology for easy engine restoration without disassembling. The

result is a much smoother, quieter engine with more power and improved fuel economy.

Benefits:

Fuel savings up to 8-21 % (up to 40% in idle mode)

5 times lowered noise and vibration levels

Restores friction surfaces and protects against wear

100 times reduction of the friction coefficient

Increased oil pressure and greater combustibility

Restores engine power to 100%

3-9 times reduction in CO and CH in the exhaust

Environmental friendly and no side effects

After injection of nanoE AIO, ceramic coating on engine’s metallic surface will start working from about

300km – 700km. The effects felt are: increased power, smoother rides, reduced noise, no smokes and

improved fuel economy. After running 1,500Km upon injection of nanoE, you can change engine oil at

normal intervals because perfect at 1,500km, the ceramic coating process on the engine surface would

be complete. The nano ceramic coating would remain in place until 30,000km to 50,000km with just

one injection of nanoE AIO.

NANO ENERGIZER restores worn metal surfaces with Nano technology, to dramatically reduce

friction and wear within your engines. Nano Energizer treats your engine, not the oil.

Search the internet for “engine treatment” and you’ll get a bunch of them. However, there is only one

engine treatment that has been on the market that far surpasses all – THE NANO ENERGIZER!

What’s the secret to the most effective and revolutionary engine treatment on the market today?

Treating the metal, not the oil. Metal surfaces, no matter how polished they may appear, reveal

microscopic peaks and valleys. When two metal surfaces come in contact, friction is created with these

uneven surfaces, which causes wear, heat buildup and greater use of energy by the machine.

In an engine, the resulting wears creates low spots and wear patterns in areas like camshafts, lifters,

gears and bearings. Not only this, but particle contaminants build up in the oil over time and cause

scratches and scores in the metal surfaces. Loss of compression, poor ring seal, blow-by and fuel dilution

of the oil are all undesirable results of this.

NanoTech International formulated its Nano Energizer Technology to combat this problem. Unlike other

engine treatments that may claim to reduce friction or increase oil lubricity, Nano Energizer actually

resurfaces the metal by filling the scratches, scores and imperfections in the metal surface with nano

particles. This creates two super-slick metal surfaces that may run together with substantially reduced

friction and heat. Oil lubricity is improved and extended; engine temperature goes down as your vehicle

runs smoother at a lower temperature. Most people know the majority of friction and wear in an

engine’s life happens during cold starts as the engine turns over before the oil has had a chance to

circulate everywhere it needs to go. Enter the Nano Energizer.

Why should you use Nano Energizer?

Longer engine life

Improved mileage and performance

Reduced Smoke

Quieter engine operation

Increased combustion

Reduced emissions

No matter what kind of vehicle or engine you have, Nano Energizer is right for you!

TESTIMONIALS & TEST REPORTS

The application of Nano Energizer Universal Restorer (Smaller Engine) is an alternative to liquid lubricant grease

with nano ceramic cermet coating technology

Benefits:

Better advantages against conventional gel type grease

Restoration and protection of worn-out metallic surface

Increased lifespan for chains, bearings, pivots, etc.

Considerable reduction of friction and abrasion

Reduced mechanical failures due to lubrication systems

Reduced operating noise throughout

Cooler operating temperature due to less friction

Suitable for high speed bearing and machines

Universal Applications:

All metallic mechanism for automobiles and motorbikes e.g. transmissions, gearbox

Various kinds of exercise equipment, clutch and bearing

Chains for motorbikes, bicycles, gear boxes, pivot etc.

Various kinds of machinery and tools

Seeking Distributors, Wholesalers and Retailers

Phone: 1(868) 684-0641 or 1(868) 739-4055

Email: info@ninestepstt.com

Proudly Manufactured in Korea and Distributed by

Nine Steps Distributors (Trinidad Ltd)