national fluid power centre uk - hydraulics and pneumatics ... · –book on-line, ... short...
TRANSCRIPT
NATIONAL FLUID POWER CENTRE UK
www.nfpc.co.uk – Book on-line, Pay on-line, Register on-line
CO
UR
SE P
LAN
NER
(
ISSU
E 3
5) C
OU
RSE P
LAN
NER
(ISSUE 3
5)
August - December 2018
SHORT COURSE PLANNER
NFPC- BFPA Certified CETOP Education Centre also NQA ISO 9001:2015 Registered
The UKs Leading Centre for “INTEGRATED SYSTEMS ENGINEERING”HYDRAULICS, PNEUMATICS, APPLIED ELECTRONICS & CONTROL
Plus - CETOP Competence Based Qualifications- NFPC Competence Based Training Programmes- Bespoke Training, designed to meet your needs - CPD Approved Courses by Institute of Quarrying
THE NFPC is an APPROVED TRAINING provider for:
Course information and on-line booking is availableon our websiteYou may also contactAnne ClarkeBookings & Customer Liaison E-Mail: [email protected]: +44 (0)1909 504539Fax: +44 (0)1909 504774
Based atWorksopNottinghamshireS81 7HP (UK)
We have possibly the BEST PRACTICAL FACILITIESin Europe plus Systems TrainingEngineers with a vast knowledge and experience in maintaining and managingIntegrated Fluid Power System
TRY OUR FOC ON-LINE Self Assessment Questionnairesto help YOU identify your current knowledge levels
NFPC Courses meet and exceed all BFPA Minimum Education Recommendations
INTEGRATED SYSTEMS ENGINEERINGC
OU
RSE
PLA
NN
ER
(IS
SUE
35
) CO
UR
SE PLA
NN
ER (ISSU
E 35
)
1. Possibly the BEST practical facilities in Europe to improve your skills2. We have 8 highly experienced Training Engineers from industry who
understand your training needs and are here to improve your performance.
3. YOU need never wait again to attend courses, we run many of our courses every week and on demand.
4. All courses have a high practical content to improve your skills through hands on experience.
5. Course contents have a high usefulness factor and relateto the real world of work and that of improving your overall ability back in your place of work.
7. We will respond quickly to your needs with a positive solution and help you in every way to upskill and educate your staff.
8. NFPC is the approved training provider for the companies below and supported by over 50 International companies guaranteeing that you work on the latest technology at all times.
We offer an extensive
range of services tomeet your needs
Introductory Level Courses• Hydraulics• Pneumatics
• Electrical/Electronics
CETOP & NFPCCompetence Based
QualificationsLevels 1,2,3• Hydraulics• Pneumatics
Stage 1 Courses• Hydraulics
• Electro-Pneumatics• Electrical/Electronics• CPD Accredited (IQ)
• All meet BFPA Minimum Education Recommendations
Stage 2 CourseExtensive RangeSee our course
PROGRESSION ROUTE
Bespoke Courses on request
REFRESHER TRAINING
www.nfpc.co.uk
CO
UR
SE P
LAN
NER
(
ISSU
E 3
5)
CO
UR
SE PLA
NN
ER (ISSU
E 35
)
Message from NFPC DirectorWe recommend “ REFRESHER TRAINING” based on a minimum of 3 years from the date shown on your course certificate obtained at the NFPC.Our Refresher Courses will involve both knowledge and skills developments and involve practical training. In all cases you will be brought up to date once again ensuring a better and safer all round work based performance.
Stage 1 Hydraulics –1 Day Refresher Training – Per Person, Cost = £350.00 ExcVAT (9am-5pm)Planned Dates: 2018 (max = 8 candidates per course)• 10 Sep• 24 Sep• 08 Oct• 22 Oct• 12 Nov• 26 Nov
If you feel confident that you do not needa Stage 1 Refresher, are you ready to progress on to our Stage 2 Courses.PLEASE REFER TO OUR RECOMMENDEDPROGRESSION ROUTE AND CHECK OUR WEBSITE
FOR ALL OF OUR COURSES.www.nfpc.co.uk
Stage 1 Hydraulics 3 days
Stage 2 Mobile Hydraulics 4 days
Stage 2 Industrial Hydraulics 4 days
CETOP LEVEL 1 QualificationH1 Hydraulics
COMPETENCE BASED- 2days
CETOP LEVEL 3-Advanced QualificationCOMPETENCE BASED
Mobile (MH3) or Industrial (IH3) 1 Year
Stage 2Pumps & Controls
3 day
Stage 2Proportional
Hydraulics3 days
Stage 2Hydraulic
Troubleshooting2days
Principles of Hydraulic
System Design3 days
(Industrial) Stage 2Winch Hydraulic
Systems3days
Stage 2ContaminationManagement/
Assessment2x1 days
Stage 2Accumulator Competence
2 days
Stage 2Safe Management
of Hydraulic Systems1 days
Stage 1 Electro-Pneumatics 3 days
Stage 2 Electro-Pneumatics (EP2)(Advanced)
Under development
CETOP LEVEL 1 QualificationP1 Pneumatics
COMPETENCE BASED- 2 days
Stage1Electrical/Electronics
relating toMOBILE Systems
3 days
Stage1Electrical/Electronics
relating toINDUSTRIAL Systems
3 days
CETOP LEVEL 2 QualificationIH2 Hydraulics
COMPETENCE BASED- 5 days
Introduction to Hydraulics 2 days
WE ALSO OFFERAPPRENTICE SUMMER SCHOOL
2 Week course (July/August)• Introduction to Hydraulics
• Stage 1 Hydraulics• CETOP H1 Qualification
PROGRESS TO:• Electrical/Electronic Route• OR any Stage 2 Course
BESPOKETRAINING
Visit the NFPC website www.nfpc.co.uk.
Use our FOC Online Self-Assessment Questionnaire to determine your
starting level.
Courses on REQUEST
Additional Courses offered : Net Costs/Person• PLC Workshops (1 day) £300.00• Water Hydraulics (2 days) £550.00• Fluid Power Mathematics (1day) £300.00• Principles of Hydraulic Hoses (1 day) £300.00• Hydraulic Troubleshooting (2 days) £650.00 • Servo Hydraulics Systems (1 day) £350.00• Closed Loop Systems & Control (2 days) £985.00• Safe Management of Hyd Systems (1day) £300.00• Contamination Management (1day) £300.00• Contamination Assessment (1day) £300.00• Winch Hydraulic Systems (3 days) £975.00
Introduction to Elec/Electronics 1 day Introduction to Pneumatics 1 day
Stage 1 Refresher1 day course(Max 3 years)
INTEGRATED SYSTEMS ENGINEERING STARTING POINT
Technical Centre 1Introduction to Hydraulics
2 Day Course (9am-5pm)£550.00 per person + VAT
Stage 1 Hydraulics3 Day Course (9am-5pm)£975.00 per person + VAT
CETOP Hydraulics (H1)Competence Based Qualification
2 Day Course (9am-5pm)£595.00 per person + VAT
THE NEXT STEPTechnical Centre 2 and 3
Stage 2 HydraulicsIndustrial or Offshore
4 Day Course1.15 pm (Mon)- 12.30pm (Fri)
£1175.00 per person +VAT
Stage 2 HydraulicsMOBILE
4 Day Course1.15 pm (Mon)- 12.30pm (Fri)
£1175.00 per person +VAT
Stage 2 Pumps & Controls3 Day Course (9am-5pm)£975.00 per person +VAT
Stage 2 AccumulatorNFPC Competence Based Course
2 Day Course (9am-5pm)£650.00 per person +VAT
Include:Written Examination and Practical Task Assessment
Include:Written Examination and Practical Task Assessment
www.nfpc.co.uk
CO
UR
SE P
LAN
NER
(
ISSU
E 3
5)
CO
UR
SE PLA
NN
ER (ISSU
E 35
)
Successful candidates must registeron the BFPA Website www.nfpc.co.uk to receive their CETOP Certificate at a cost of £35.00 +VAT
To “meet your needs” we can offer you alternative course dates for groups of 4 candidates or more for many of our courses
NEW
Principles of Hydraulic
System Design (Industrial)3 Day Course (9am-5pm)£975.00 per person +VAT
NEW Competence Based Qualification
CETOP Hydraulics (IH2)Follow on from Stage 2 Hydraulics
5 Day Course (9am-5pm)Introductory Price
£1400.00 per person +VAT17-21 Sep22-26 Oct12-16 Nov03-07 Dec
Limited to Max 4
Limited to Max 12
This Stage 1 Hydraulics course meets and exceeds the BFPA Minimum Education Recommendations for Hydraulics at this level
Limited to Max 6
Limited to Max 4
30-31 July03-04 Sep01-02 Oct05-06 Nov03-04 Dec
06-08 Aug13-15 Aug29-31 Aug03-05 Sep10-12 Sep17-19 Sep24-26 Sep01-03 Oct
08-10 Oct15-17 Oct22-24 Oct29-31 Oct05-07 Nov12-14 Nov26-28 Nov03-05 Dec10-12 Dec
25-26 Oct01- 02 Nov08-09 Nov15-16 Nov29-30 Nov06-07 Dec13-14 Dec
06-10 Aug10-14 Sep24-28 Sep15-19 Oct05-09 Nov26-30 Nov10-14 Dec
20-24 Aug17-21 Sep08-12 Oct12-16 Nov10-14 Dec
06-08 Aug03-05 Sep08-10 Oct19-21 Nov10-12 Dec
06-07 Aug10-11 Sep15-16 Oct19-20 Nov
30 July-01 Aug03-05 Sep24-26 Sep
09-10 Aug16-17 Aug06-07 Sep13-14 Sep20-21 Sep27-28 Sep04-05 Oct18-19 Oct
22-24 Oct05-07 Nov26-28 Nov
INTEGRATED SYSTEMS ENGINEERING
www.nfpc.co.uk
CO
UR
SE P
LAN
NER
(
ISSU
E 3
5)
CO
UR
SE PLA
NN
ER (ISSU
E 35
)
Stage 1 Electro-Pneumatics (EP1)3 Day Course (9am-5pm)£975.00 per person + VAT
CETOP Pneumatics (P1)Competence Based Qualification
2 Day Course (9am-5pm)£595.00 per person + VAT
Stage 2Proportional Hydraulics
INDUSTRIAL3 Day Course (9am-5pm)£975.00 per person + VAT
09-10 Aug06-07 Sep27-28 Sep25-26 Oct29-30- Nov
Include:Written Examination and Practical Task Assessment
Stage 1Electrical/Electronics relating to
INDUSTRIAL SYSTEMS3 Day Course (9am-5pm)£975.00 per person +VAT
Successful candidates must registeron the BFPA Website www.nfpc.co.uk to receive their CETOP Certificate at a cost of £35.00 +VAT
These Stage 1 courses meets and exceeds the BFPA Minimum Education Recommendations for Pneumatics and Applied Electrical/Electronics at this level
Stage 1Electrical/Electronics relating to
MOBILE SYSTEMS3 Day Course (9am-5pm)£975.00 per person +VAT
Limited to Max 6
Limited to Max 4
Limited to Max 6
Limited to Max 6
Limited to Max 4
Introduction to Electrical/Electronics1 Day Course (9am-5pm)£300.00 per person + VAT
Introduction to Pneumatics1 Day Course (9am-5pm)£300.00 per person + VAT
13 Aug10 Sep15 Oct05 Nov
30 July29- Aug17 Sep19 NovMore Courses
on request
Limited to Max 6
Limited to Max 6
14-16 Aug11-13 Sep16-18 Oct06-08 Nov
14-16 Aug11-13 Sep16-18 Oct06-08 Nov
08-10 Aug05-07 Sep24-26 Oct21-23 Nov
06-08 Aug03-05 Sep24-26 Sep22-24 Oct26-28 Nov