Niles Building ProductsNiles Building Products 330-544-0880 • 880-323-3329 • Fax 330-544-8868 • www.nilesbldg.comNILES BUILDING PRODUCTS RECOMMENDS THE USE OF ZINC ACCESSORIES FOR ALL EXTERIOR APPLICATIONS

** PALLET WEIGHTS MAY VARY

C O L D R O L L E D C H A N N E L , F L A T S T O C K , C O R N E R A N G L E

Cold Rolled Channel

Flat Stock

Corner Angle

AVAILABLE IN 16 GAUGE 20 BUNDLES/PALLETCold Rolled Channel is most commonly used as a bridging method to provide bracing in metal framing systems.Note: Cold Rolled Channel will not provide adequate bracing if not properly attached to the framing member.

AVAILABLE IN 16, 18, 20 & 25 GAUGE 20 BUNDLES/PALLETFlat stock is used for lateral & diagonal bracing to provide support in metal framing systems.

SIZE

3/4”

3/4”

1-1/2”

1-1/2”

LENGTH

10’

16’

10’

16’

PCS/BUNDLE

20

20

10

10

WEIGHT/BUNDLE

50 LBS.

80 LBS.

45 LBS.

75 LBS.

WEIGHT/PALLET

1000 LBS.

1600 LBS.

900 LBS.

1500 LBS.

AVAILABLE IN 25 & 20 GAUGE50 BUNDLES/PALLETThe Niles 90 degree Corner Angle is most commonly used in lapped framing conditions as well as fl oor & ceiling runners, soffi t framing and wallboard partitions.

SIZE LENGTH PCS/BUNDLE

1-1/2” x 1-1/2” 10’ 10

2” x 2” 10’ 10

3” x 3” 10’ 10

SIZE LENGTH PCS/BUNDLE

2” 10’ 10

4” 10’ 10

6” 10’ 10

8” 10’ 10

Niles Building ProductsNiles Building Products 330-544-0880 • 880-323-3329 • Fax 330-544-8868 • www.nilesbldg.comNILES BUILDING PRODUCTS RECOMMENDS THE USE OF ZINC ACCESSORIES FOR ALL EXTERIOR APPLICATIONS

N I L E S C A S I N G B E A D S

NILES NO. 66-X CTNS/ NOMINAL NOMINALEXPANDED FLANGE PALLET LBS/CTN WT/PALLET**1/4” gr. Galv. 42 41 17221/4” gr. Zinc 42 43 18063/8” gr. Galv. 42 41 17223/8” gr. Zinc 42 43 18061/2” gr. Galv. 42 41 17221/2” gr. Zinc 42 43 18065/8” gr. Galv. 42 48 20165/8” gr. Zinc 42 47 19753/4” gr. Galv. 42 48 20163/4” gr. Zinc 42 47 19757/8” gr. Galv. 42 48 20167/8” gr. Zinc 42 51 21421” gr. Galv. 42 48 20161” gr. Zinc 42 51 21421-1/4” gr. Galv. 40 50 20001-1/4” gr. Zinc 40 54 21601-1/2” gr. Galv. 40 55 22001-1/2” gr. Zinc 40 61 2440

30 PCS./CTN. - 300 FT./CTN.

NILES NO. 66N CTNS/LONG FLANGE PCS./CTN PALLET

3/8” 30 421/2” 30 423/4” 30 427/8” 30 421” 30 421-3/8” 30 401-1/2” 30 40

300 FT./CTN.

NILES NO. 66-N CTNS/ NOMINAL NOMINALSHORT FLANGE PALLET LBS/CTN WT/PALLET**3/8” gr. Galv. 42 41 17223/8” gr. Zinc 42 43 18061/2” gr. Galv. 42 41 17221/2” gr. Zinc 42 43 18063/4” gr. Galv. 42 48 20163/4” gr. Zinc 42 47 19757/8” gr. Galv. 42 48 20167/8” gr. Zinc 42 51 21421” gr. Galv. 42 48 20161” gr. Zinc 42 51 21421-1/4” gr. Galv. 42 50 21001-1/4” gr. Zinc 42 54 22681-1/2” gr. Galv. 42 55 23101-1/2” gr. Zinc 42 61 2520

30 PCS./CTN. - 300 FT./CTN.*SPECIAL ORDER ONLY. MINIMUM QUANTITIES APPLY.

*

*

*

*

*

**

*

Used to effectively terminate plaster edge and/or to separate stucco from all other structural membranes at doors, windows, and other openings; also when plaster/stucco meets dissimilar material. Expanded fl ange provides excellent stucco embedment at the junctions of the bead and metal lath.

Also available with punched grounds upon request.

Caution: 66X Casing Beads w/punched grounds should not be used as a substitute for foundation weep screeds in a 3 coat stucco system.

Niles No. 66-X Expanded FlangeCasing Bead

Niles No. 66N, Long Flange (J-Weep)

3-1/2 Flange

Available in Zinc - Contact Plant for Details

Niles No. 66N, Short Flange

The choice where short, solid flanges are preferable. Also available with punched grounds.

** PALLET WEIGHTS MAY VARY