network administration cpit 470 instructor: mrs aisha ehsan
TRANSCRIPT
NETWORK ADMINISTRATION CPIT 470
Instructor: Mrs Aisha Ehsan
Lab 1 CISCO IOS - Configuring Devices
Objective: The objective of this lab is to practice
basic configuration on the network devices such as router and switch using console connection.
Introduction to Packet Tracer software.
1. How to use Packet Tracer software for the Network building and learning.
2. Connecting a PC to a Router using Console cable
3. Configure the basic configuration commands in the router through console connection.
Lab 1 CISCO IOS - Configuring Devices
Different IOS Modes for Devices
Task…
Task 1: Draw a diagramConnect the Pc to a router using Console Cable and Cross Cable.
Configure global configuration1. Change the hostname2. Configure the bannerRouter1(config)# banner motd %
Hello %@ c *
Tasks…
Task 2: Configure Cisco router password access. Step 1: configure privileged exec password
# enable password cisco # secret password cisco
Step 2: configure console passwordRouter1(config)# line console 0
Router1(config-line)# password class
Router1(config-line)# login Step 3: configure Virtual Lines Password
Router1(config)# line vty 0 4
Router1(config-line)# password class
Router1(config-line)# login
Task 3: Step 1: Save the Router Configuration
FileSee the RAM and NVRAM contents.
Router1# show startup-configRouter1# show running-config
Step 2: Save RAM to NVRAM.Router1# copy running-config
startup-config
Tasks…