network device presentation
TRANSCRIPT
![Page 1: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/1.jpg)
1
Chapter Overview
Bridging Switching Routing
![Page 2: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/2.jpg)
2
What Is a Bridge?
A data-link layer device that connects networks and filters packets Propagates only packets destined for the
other side of the bridge Can reduce network traffic and collisions Can lessen delays
![Page 3: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/3.jpg)
3
Connecting LANs with a Bridge
![Page 4: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/4.jpg)
4
Bridges and Collisions A collision domain is a network (or part of a network) that
is constructed so that a collision occurs when two computers transmit packets at precisely the same time.
Adding a hub to a local area network (LAN) increases its size but maintains a single collision domain because hubs relay signals immediately at the physical layer, without filtering them.
Hubs do not relay packets immediately; they wait until the entire packet is received.
Because the bridge delays propagation, computers on opposite sides of the bridge transmitting at the same time do not cause a collision.
Adding a bridge to a LAN splits it into two collision domains, resulting in fewer collisions and increased efficiency.
![Page 5: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/5.jpg)
5
Broadcasts
![Page 6: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/6.jpg)
6
Bridges and Broadcasts
Bridges propagate all broadcast packets without filtering them.
The network segments on either side of a bridge are in the same broadcast domain.
![Page 7: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/7.jpg)
7
Transparent Bridging Transparent bridging is a method for
automatically compiling a bridge’s address tables.
Bridges maintain an address table for each network segment.
Bridges read the source and destination addresses of packets and compare them to the tables to determine whether to propagate them.
When a bridge lacks the information needed to filter a packet, it propagates the packet by default.
![Page 8: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/8.jpg)
8
Bridge Types
Local bridge. Connects network segments of the same type and at the same location
Translation bridge. Connects network segments at the same location that use different media or different protocols
Remote bridge. Connects network segments at remote locations, using a wide area network (WAN) link
![Page 9: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/9.jpg)
9
Translation Bridge
![Page 10: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/10.jpg)
10
Switch Characteristics Data-link layer device Replaces bridges and sometimes routers Similar in appearance to a hub Forwards incoming traffic out to the
destination port only Converts a shared network medium to a
dedicated one Offers advantages such as reduced network
congestion and the use of full network bandwidth
Can operate in full-duplex mode
![Page 11: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/11.jpg)
11
Switching
![Page 12: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/12.jpg)
12
Replacing Routers with Switches
![Page 13: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/13.jpg)
13
Virtual LANs
A virtual LAN (VLAN) is a subnet that exists inside a switch.
Broadcasts sent by a computer go only to the other computers in the VLAN.
Communications within a VLAN are switched.
Communications between VLANs can be routed or switched.
![Page 14: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/14.jpg)
14
Layer 3 Switching
Layer 3 switching minimizes the amount of routing between VLANs because routing occurs only when absolutely necessary.
A router establishes a connection between systems and then switches take over.
![Page 15: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/15.jpg)
15
Switch Types
A cut-through switch begins to forward packets immediately.
A store-and-forward switch waits until the entire packet arrives before forwarding it.
![Page 16: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/16.jpg)
16
Router Characteristics
Connect networks together to form an internetwork
Are network layer devices Can connect LANs running different
data-link layer protocols
![Page 17: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/17.jpg)
17
Router Functions
Forward packets to the destination network
Strip the data-link layer frames from incoming packets and repackage the data into new frames
Fragment packets when necessary
![Page 18: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/18.jpg)
18
Routing Process Example
![Page 19: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/19.jpg)
19
Hops
![Page 20: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/20.jpg)
20
Routing Tables
Routing tables are essential to the router operation and functions.
There are two methods of creating routing tables: Static routing. Manual creation of routing table
entries by an administrator Dynamic routing. Automatic creation of routing
table entries by using a specialized routing protocol
![Page 21: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/21.jpg)
21
Router Types
Routers can be stand-alone hardware devices or software running on a computer. Hardware routers. Range from expensive
rack-mounted devices to small stand-alone units
Software routers. Include Microsoft Windows 2000 Internet Connection Sharing (ICS), and Routing and Remote Access
![Page 22: Network Device Presentation](https://reader036.vdocument.in/reader036/viewer/2022062707/55845bced8b42a962c8b47e5/html5/thumbnails/22.jpg)
22
Chapter Summary Bridging
Bridges selectively relay packets between network segments, depending on their data-link layer destination addresses.
Bridges maintain a single broadcast domain and create separate collision domains.
Switching Switches improve on the function of bridges by forwarding packets only to
their destination systems. Switches reduce the collisions on a network and increase the bandwidth
available to each computer. Routing
Routers are used to connect networks together at the network layer of the OSI reference model.
Routers strip away the data-link layer frame of incoming packets and build a new frame using the data-link layer protocol of the outgoing network.
Routing tables can be created manually by a network administrator or automatically by a routing protocol.