new cp1e with exceptional cost - trisak · fa integrated tool package cx-one cx-one lite ver.4....

New CP1E wi th Except iona l Cost

E c o n o m i c a lE a s y t o u s e

E f f i c i e n t»

»

»

14 20 30 40 60

CP1E-E40S□□-□ CP1E-E60S□□-□CP1E-E30S□□-□CP1E-E20S□□-□CP1E-E14S□□-□

E□□S-type CP1E CPU Units Application Models (Built-in USB port)

N□□S1-type CP1E CPU Units Application Models (Built-in 3 ports : RS-232C, RS-485, USB)

CP1E-N40S1□□-□ CP1E-N60S1□□-□CP1E-N30S1□□-□

N□□S-type CP1E CPU Units Application Models (Built-in 2 ports : RS-232C, USB)

CP1E-N40S□□-□ CP1E-N60S□□-□CP1E-N30S□□-□

Cost-Effective, Easy Application,Application to Many Systems

Program capacity : 2 KstepsDM Area capacity : 2 KwordsTimers/Counters : 256 each

High-speed counters :10 kHz × 6 inputs

Peripheral USB port Output terminals

Output indicators

Input indicators

Input terminals

Power supply input terminals

Operation indicators

Output terminal block

Input terminal block

The Basic Models provide cost performance and easy application.

Support Software with “Smart Input” intuitive operation.USB port provides. Support Software can be connected using commercially available USB cables.

The optimal cost can be achieved efficiently with NEW CP1E CPU Units.

2

8Ksteps

2Ksteps

Number of I/O points

Programcapacity

EEasy to usey to useEasy to use

Efficient

Economical

The product photographs and figures that are used in this catalog may vary somewhat from the actual products.

86 79

90

86 79

90

130 79

90

150 79

90

195 79

90

130 79

90

150 79

90

195 79

90

130 79

90

150 79

90

195 79

90

EconomicalEconomical

Exceptional CostResponding to Global Competition with More Device Control Possibilities

The CP1E provide high cost performance to further reduce costs by allowing you to select the optimal CPU Unit from the E□□S-type Basic Models or N/□□S(1)-type Application Models.

Lineup including CPU Units with built-in three ports: USB, RS-232C, RS-485. The depth of the CP1E-N□□S(1)-type CPU Units with RS-232C connectors is reduced by 20 mm.

Exceptional Cost.Optimal cost with a selection of two types of CP1E CPU Units.

Program capacity : 8 KstepsDM Area capacity : 8 KwordsTimers/Counters : 256 each

Option Battery

Pulse outputs : 100kHz x 2 outputs *2

Built-in RS-485 port *1

Built-in RS-232C port

Built-in RS-232C communications status indicator

Built-in RS-485 communications status indicator *1

High-speed counters : 100 kHz × 2 inputs and 10 kHz × 4 inputs

Compatible with small Programmable Terminals and inverter-controlled position control.

Easy to use

EfficientEfficient

EconomicalEconomicalEconomical

*1. N□□S1-type only.*2. Models with transistor outputs.

PeripheralUSB port

3

Easy to use input editor with smart input function

Easy Input Editor�� Instruction and Address Input Assist Functions

When you begin typing an instruction from the keyboard in Ladder Editor Mode,suggested instructions are displayed and the addresses are automatically entered. Connecting lines are added automatically based on the cursor position, enabling intuitive ladder programming.

User-friendly Ladder Program Input

� Automatic Connecting Line InsertionWith the automatic connecting line insertion function the necessary connection is added automatically based on the curser position.

When you begin typing an instruction from the keyboard while in the Ladder Editor Window, suggested instructions are displayed. All you have to do is select the instruction from the list for easy input even if you do not remember the entire mnemonic.

� Address IncrementingThe address of the next operand, including input bits and output bits, is incremented by one and displayed as the default. This enables easily inputting consecutive addresses.

� Automatic Column Insertion When Inserting InstructionsThe column is automatically inserted when an instruction is added even if the curser is above another instruction.

When an instruction is input at the curser, a connecting line is automatically inserted.

When an instruction is input at the curser, a column is automatically inserted for the instruction.

4

When you type “M,” a list of instructions starting with M is displayed.

Instruction names are displayed as guidance.

Default addresses CIO 1 and CIO 101 are displayed by incrementing the previously input addresses, CIO 0 and CIO 100.

� �

Simple and User Friendly

6 mm slimmer than previous CP1E.

The depth of CPU Units with RS-232C connectors is reduced by 20 mm*

�

�

�

�

When using XW2Z-□00T-□

20 mmslimmer

0.00 100.00

0.01

0.00 100.00

0.01

0.05 100.05

0.06

Easy to reuse ladder programming

� Copying with Address Incrementing � Intuitive Menu DisplayTo create the same group of ladder instructions more than once with the address addition copy function, the instructions can be reused simply by inputting an address offset.

Intuitive Menu Structure

An intuitively designed menu structure makes it easy to see the overall system simply by looking at the menu for smooth operation without referring to a manual.

5

Offset set to 5 bits The function required for process is grouping.

Only commercially available USB cables requiredAll CP1E CPU Units use high-speed USB for the peripheral port. Support software (computers) can be connected using commercially available USB cables. Without the need for USB conversion cables or special cables, connection is easier and cable cost is low.

Support Software

Commercially available USB cable

105mm

79mm85mm

125mm

Normal

N□□S(1)-type

Easy to useIntuitive control with “Smart Input.”

* N□□S(1)-type only.

* N□□S1-type only.

* Models with transistor outputs only. * N□□S1-type only.

Pulse Outputs* Modbus-RTU easy master *

More Applications with AdvancedControl Capabilities and FunctionalityThe CP1E N□□S(1)-type CPU Units are equipped with high-speed counters, pulse outputs, and a built-in serial port. These features enable controlling a wide range of devices.

PT

RS-232C

Servomotor / Driver

Pulse outputs

Two 100kHz pulse outputs for high-precision position control.

Rotary encoder General-purpose motor

High-speed counter

RS-485

Inverter

Specify Inverter speeds via RS-485

Efficient and Effective

Built-in RS-485 *

High-speed

Counters

Modbus-RTUEasy

Master

Built-in RS-232C

Built-in USB

PT

Support Software

PulseOutputs

-type onlyNN□□S( 1 )N□□S( 1 )

6

Expansion Units and Expansion I/O Units

CP1E CPU Unit with 30, 40, or 60 I/O Points

Expansion I/O Units Analog I/O Units Temperature Sensor Units CompoBus/S I/O Link Unit

Optional units for more flexibilityThree expansion units are available.

Control multiple axes with one PLC using the two 100kHz and four 10kHz, single-phase high-speed counters.

Link data with up to 10 words between up to nine CP1E-N CPU Units when controlling a device with multiple CP1E-N PLCs.

Rotary encoder

RS-232C

PTHigh-speed counter

Inverter

Polling Unit Polled Node No. 0 Polled Node No. 7CJ1M CPU Units can also be connected.

Polling Unit

Polled Node No. 0

Polling Unit

Polled Node No. 0

Polling Unit

Polled Node No. 0

Polled Node No. 7 Polled Node No. 7 Polled Node No. 7

Flexibly handle even small-scale systems.Various Option Units available for increased expandability.

Analog I/O Unit CP1W-MAD11Analog Input UnitCP1W-AD041Analog Output Unit CP1W-DA041CP1W-DA021

Units with 40 I/OCP1W-40EDR / CP1W-40EDT /CP1W-40EDT1Units with 20 I/OCP1W-20EDR1 / CP1W-20EDT /CP1W-20EDT1Units with 32 OutputsCP1W-32ER / CP1W-32ET /CP1W-32ET1

Units with 16 OutputsCP1W-16ER / CP1W-16ET /CP1W-16ET1Units with 8 OutputsCP1W-8ER / CP1W-8ET /CP1W-8ET1Unit with 8 InputsCP1W-8ED

Temperature Sensor Units (Thermocouples)

CP1W-TS001CP1W-TS002

Temperature Sensor Units

(Platinum Resistance Thermometers)

CP1W-TS101CP1W-TS102

High-speed Counters

Serial PLC Links

CompoBus/S SlaveCP1W-SRT21

N□□S( 1 )

7

N□□S1-type

Option Battery

USB Port

USB Port

Expansion Units

Expansion Units

For details, refer to the CP1E Data Sheet (Cat.No.P061)

N□□S(1)/E□□S-type CPU UnitCPU Unit

Option Bat

Option Battery

stinU noisnapxEtroP BSU

CPU Unit with 30, 40, or 60 I/O Points (Built-in 3 ports)

N□□S-type CPU Unit with 30, 40, or 60 I/O Points (Built-in 2 ports)

E□□S-type CPU Unit with 14 or 20 I/O Points

E□□S-type CPU Unit with 30 or 40 I/O Points

Option Bat

FA Integrated Tool Package CX-OneCX-One Lite Ver.4.□

Micro PLC Edition CX-ProgrammerCX-ProgrammerCX-IntegratorSwitch Box UtilityCX-ProtocolCX-SimulatorCX-PositionCX-Motion-NCFCX-Motion-MCHCX-Motion

Ver.9.□Ver.9.□Ver.2.□Ver.1.□Ver.1.□Ver.1.□Ver.2.□Ver.1.□Ver.2.□Ver.2.□

CX-DriveCX-Process ToolFaceplate Auto-Builder for NSCX-DesignerNV-DesignerCX-ThermoCX-ConfiguratorFDTCX-FLnetNetwork ConfiguratorCX-Server

Ver.2.□Ver.5.□Ver.3.□Ver.3.□Ver.1.□Ver.4.□Ver.1.□Ver.1.□Ver.3.□Ver.4.□

YesNoYesYesNoYesNoNoNoNo

NoYesYesYesYesYesYesYesYesYes

CX-One Ver.4.□YesNoNoYesYesYesYesNoYesYes

Support Software in CX-One CX-One Lite Ver.4.□YesYesYesYesYesYesYesYesYesYes

CX-One Ver.4.□Support Software in CX-One

Support Software in CX-One The following tables lists the Support Software that can be installed from CX-One

Note: For details, refer to the CX-One Catalog (Cat. No. R134).

USB Port

Expansion UnitExpansion Unit Billt-in analog:2 inputs and 1 output

USB port

Built-in RS-232C

Option Battery

Program capacity:8 K steps

DM Area capacity:8 K words

High-speed counters:100 kHz×2 inputs and

10 kHz×4 inputs


10 kHz×4 inputs

Pulse outputs:100kHz×2 outputs

USB port

Built-in RS-232C

Built-in RS-485Built-in RS-485

Option Battery




ClockClock

Option Board

Expansion UnitExpansion Unit Billt-in analog:2 inputs and 1 output

USB port

Built-in RS-232C

Option Battery




10 kHz×4 inputs


10 kHz×4 inputs


USB port

Built-in RS-232C

Built-in RS-485

Option Battery




ClockClock

Option Board

Built-in RS-232C

Built-in RS-485

Option Board

Option Battery

Expansion Unit

Clock

Pulse outputs

Billt-in analog

USB port Program capacity:2K steps

DM Area capacity:2K words

High-speed counters:10 kHz×6 inputs




Built-in RS-232C

Built-in RS-485

Option Board

Option Battery

Clock

Pulse outputs

Billt-in analog







Expansion UnitExpansion Unit

8

■ Support Software

Product name

FA Integrated Tool PackageCX-One Lite Ver.4.□

FA IntegratedTool Package CX-One Ver.4.□

Number of licenses Media Model StandardsSpecifications

CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications.CX-One Lite runs on the following OS. OS: Windows XP (Service Pack 3 or higher), Vista or 7Note: Except for Windows XP 64-bit version. CX-One Lite Ver. 4.□ includes Micro PLC Edition CXProgrammer Ver.9.□.

CX-One is a comprehensive software package that integrates Support Software for OMRON PLCs and components. CX-One runs on the following OS. OS: Windows XP (Service Pack 3 or higher), Vista or 7Note: Except for Windows XP 64-bit version. CX-One Ver. 4.□ includes CX-Programmer Ver. 9.□.

Note: 1.CP1E-E60SDR-A CPU Units are supported by CX-Programmer version 9.42 or higher. When Micro PLC Edition CX-Programmer is used, you need version 9.42 or higher. The E20/30/40(S), N20/30/40(S□) CPU Units are supported by CX-Programmer version 8.2 or higher. The E10/14(S), N14/60(S□), and NA20 CPU Units are supported by CX-Programmer version 9.03 or higher. When Micro PLC Edition CX-Programmer is used, you need version 9.03 or higher. 2.When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required. N30/40/60, NA20 only. 3. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.

*1. Multi licenses are available for the CX-One (3, 10, 30 or 50 licenses). *2. The CX-One is also available on CD (CXONE-AL□□C-V4).

1 license CXONE-LT01C-V4

CXONE-AL01D-V41 license*1

CD

DVD*2

Product name Model StandardsSpecifications

Battery Set

For N□□S(1)-type CP1E CPU UnitsNote: Mount a Battery to an N □□S(1)-type CP1E CPU Unit if the data in the following areas must be

backed up for power interruptions. DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C),

Counter Present Values (C), Auxiliary Area (A) , and Clock Function.(Use batteries within two years of manufacture.)

CP1W-BAT01

■ Battery Set

■ E□□S-type CP1E CPU Units (Basic models)

Note: There are no accessories included with E□□S-type CP1E CPU Units. A Battery (CP1W-BAT01) cannot be used.


Power Supply Outputs Output type yticapac margorPstupnI Data memory capacity

100 to 240 VAC 2K steps 2K words

812182436

68

121624

RelayRelayRelayRelayRelay

E□□S-type with 14 I/O PointsE□□S-type with 20 I/O PointsE□□S-type with 30 I/O PointsE□□S-type with 40 I/O PointsE□□S-type with 60 I/O Points


Power Supply Outputs Output type yticapac margorPstupnI Data memory capacity100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

8K steps 8K words CE

CE

CE

18

24

36

12

16

24

RelayTransistor (sinking)

Transistor (sourcing)Relay

Transistor (sinking)Transistor (sourcing)


Transistor (sourcing)

N□□S1-type with I/O Points 30

■ N□□S1-type CP1E CPU Units (Application models) : Built-in 3 ports

Note: There are no accessories included with N□□S1-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery(CP1W-BAT01) are not included.




Power Supply Outputs Output typeInputs Program capacity Data memory capacity100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

8K steps 8K words

18

24

36

12

16

24





Transistor (sourcing)

CP1E-N30SDR-ACP1E-N30SDT-DCP1E-N30SDT1-DCP1E-N40SDR-ACP1E-N40SDT-DCP1E-N40SDT1-DCP1E-N60SDR-ACP1E-N60SDT-DCP1E-N60SDT1-D

N□□S-type with I/O Points 30

■ N□□S-type CP1E CPU Units (Application models) : Built-in 2 ports

Note: There are no accessories included with N□□S-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery(CP1W-BAT01) are not included.



International Standards

CP1E-E14SDR-ACP1E-E20SDR-ACP1E-E30SDR-ACP1E-E40SDR-ACP1E-E60SDR-A

CP1E-N30S1DR-ACP1E-N30S1DT-DCP1E-N30S1DT1-DCP1E-N40S1DR-ACP1E-N40S1DT-DCP1E-N40S1DT1-DCP1E-N60S1DR-ACP1E-N60S1DT-DCP1E-N60S1DT1-D

Ordering information

The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. Contact your OMRON representative for further details and applicable conditions for these standards.

Renewal type

9

N□□/NA/E□□-type CPU Unit

Lineup including 14 or 20 I/O points of N□□-type, 20 points of NA-type and 10 points of E□□-type.

10 14 20 30 40 60

8Ksteps

2Ksteps

N□□-type CP1E CPU Units Application Models NA-type Built-in Analog I/O

E□□-type CP1E CPU Units Basic Models

CP1E-N40D□-□ CP1E-N60D□-□CP1E-N30D□-□CP1E-N14D□-□ CP1E-N20D□-□ CP1E-NA20D□-□

CP1E-E40DR-ACP1E-E30DR-ACP1E-E20DR-ACP1E-E14DR-ACP1E-E10D□-□

20 (Built-in analog : 2 inputs / 1 output)

CPU Unit with 10, 14, or 20 I/O PointsE□□-type

CPU Unit with 30 or 40 I/O PointsE□□-type

CPU Unit with 14 or 20 I/O PointsN□□-type

CPU Unit with 30, 40, or 60 I/O PointsN□□-type

Option Battery

USB Port

Option Battery

USB Port

Option BoardExpansion Units

Expansion Units

USB Port

USB Port

CPU Unit with 20 I/O Points (Built-in analog)NA-type

Option Board

Expansion UnitBillt-in analog

USB port

Built-in RS-485Built-in RS-232C

Option Battery

Program capacity:2K stepsDM Area capacity:2K words

Pulse outputs

USB port

Clock

Program capacity:2K stepsDM Area capacity:2K wordsHigh-speed counters:10 kHz×6 inputsHigh-speed counters:10 kHz×6 inputs

Built-in RS-485Option Board

Billt-in analog

USB portBuilt-in RS-232C

Option Battery

Program capacity:2K stepsDM Area capacity:2K words

Pulse outputs

USB port

Clock

Program capacity:2K stepsDM Area capacity:2K wordsHigh-speed counters:10 kHz×6 inputsHigh-speed counters:10 kHz×6 inputs


Option Battery

Option Board

USB Port

Expansion Units

For details, refer to the CP1E Data Sheet (Cat.No.P061)

Programcapacity

Number of I/O points

Billt-in analog:2 inputs and 1 output Pulse outputs:100kHz×2 outputs

High-speed counters:100 kHz×2 inputs and10 kHz×4 inputs



Option BoardOption Board



Option Battery

Program capacity:8 K stepsDM Area capacity:8 K words


Option Battery

ClockClock


Built-in RS-485




Pulse outputs:100kHz×2 outputsBillt-in analog:2 inputs and 1 output Billt-in analog:2 inputs and 1 output

Option BoardOption Board



Option Battery



Option Battery

ClockClock


Built-in RS-485

Option Board

Expansion Unit Billt-in analog:2 inputs and 1 output


Option Battery




Option Battery

ClockClock





Built-in RS-485

CPU Unit

10

■ E□□-type CP1E CPU Units (Basic models)

Note: There are no accessories included with E-type CP1E CPU Units. A Battery (CP1W-BAT01) cannot be used.

Product name Model StandardsSpecificationsPower Supply Outputs Output typeInputs Program capacity Data memory capacity

E□□-type with 14 I/O PointsE□□-type with 20 I/O PointsE□□-type with 30 I/O PointsE□□-type with 40 I/O Points

E□□-type with 10 I/O Points

100 to 240 VAC

24VDC

100 to 240 VAC

2K steps 2K words

8121824

68

1216

6 4




RelayRelayRelayRelay

CP1E-E10DR-ACP1E-E10DT-ACP1E-E10DT1-ACP1E-E10DR-DCP1E-E10DT-DCP1E-E10DT1-DCP1E-E14DR-ACP1E-E20DR-ACP1E-E30DR-ACP1E-E40DR-A

8K steps 8K words

SpecificationsPower Supply Outputs Output typeInputs Program capacity Data memory capacity

8K steps 8K words

8K steps 8K words

8K steps 8K words

UC1,N, L,CE

CP1E-N14DR-ACP1E-N14DT-ACP1E-N14DT1-ACP1E-N14DR-DCP1E-N14DT-DCP1E-N14DT1-DCP1E-N20DR-ACP1E-N20DT-ACP1E-N20DT1-ACP1E-N20DR-DCP1E-N20DT-DCP1E-N20DT1-DCP1E-N30DR-ACP1E-N30DT-ACP1E-N30DT1-ACP1E-N30DR-DCP1E-N30DT-DCP1E-N30DT1-DCP1E-N40DR-ACP1E-N40DT-ACP1E-N40DT1-ACP1E-N40DR-DCP1E-N40DT-DCP1E-N40DT1-DCP1E-N60DR-ACP1E-N60DT-ACP1E-N60DT1-ACP1E-N60DR-DCP1E-N60DT-DCP1E-N60DT1-DCP1E-NA20DR-ACP1E-NA20DT-DCP1E-NA20DT1-D

Product name Model Standards

N□□-type with 20 I/O Points



8K steps 8K wordsN□□-type with 60 I/O Points

NA-type with 20 I/O Points(Billt-in analog)

Note: There are no accessories included with N/NA□□-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery (CP1W-BAT01) are not included.

6

8

12

16

24

8

12

18

24

36

128K steps 8K words

















Transistor (sourcing)(Built-in analog

inputs : 2)(Built-in analog

outputs : 1)

8100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

100 to 240 VAC

24VDC

■ N/NA□□-type CP1E CPU Units ( Application models)



Battery Set

For N□□/NA-type CP1E CPU UnitsNote: Mount a Battery to an N□□/NA-type CP1E CPU Unit if the data in the following areas must be backed up for power interruptions. DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C), Counter Present Values (C), Auxiliary Area (A) , and Clock Function.(Use batteries within two years of manufacture.)

CP1W-BAT01

■ Battery Set


RS-232C Option Board

RS-422A/485 Option Board

RS-422A/485 Isolated-typeOption Board

Ethernet Option Board

One RS-232C Option Board can be mounted to the Option Board slot.One RS-232C connector is included.For CP1E N30/40/60 or NA20 CPU Units only.

One RS-422A/485 Option Board can be mounted to the Option Board slot.For CP1E N30/40/60 or NA20 CPU Units only.

One Ethernet Option Board can be mounted to the Option Board slot.CP1E CPU Units are supported by CP1W-CIF41 version 2.0 or higher.When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required.For CP1E N30/40/60 or NA20 CPU Units only.

CP1W-CIF01

CP1W-CIF11

CP1W-CIF12

CP1W-CIF41

The Options cannot be used for CP1E N14/20, N30/40/60S(1), E10/14/20/30/40/60(S) CPU Units.

UC1,N, L,CE

Note: It is not possible to use a CP-series Ethernet Option Board version 1.0 (CP1W-CIF41), LCD Option Board (CP1W-DAM01), or Memory Card (CP1W-ME05M) with a CP1E CPU Unit.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

International Standards

Ordering information

The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. Contact your OMRON representative for further details and applicable conditions for these standards.

Normal type

■ Options (for CP1E N30/40/60 or NA20 CPU Units)

11

UC1,N, L,CE

Note: Do not use this document to operate the Unit.

Read and Understand this CatalogPlease read and understand this catalog before purchasing the product. Please consult your OMRON representative if you have anyquestions or comments.

Warranty and Limitations of LiabilityWARRANTYOMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (orother period if specified) from date of sale by OMRON.OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITYOMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application ConsiderationsSUITABILITY FOR USEOMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of the product in the customer's application or use of the product.Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it wil l be used.Know and observe all prohibitions of use applicable to this product.NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTSOMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

DisclaimersCHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with your OMRON representative at any time to confirm actual specifications of purchased product.

DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute awarranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application require ments. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

Cat. No. P060-E1-08

SINGAPORE:Tel: (65) 6547 6789 Fax: (65) 6547 6769Email: [email protected]

MALAYSIA:Tel: (60-3) 7688 2888 Fax: (60-3) 7688 2833Email: [email protected]

NEW ZEALAND:Tel: (64-9) 358 4400 Fax: (64-9) 358 4411Email: [email protected]

INDONESIA:Tel: (62-21) 2949 7500 Fax: (62-21) 2949 7555Email: [email protected]

VIETNAM:Tel: (84-8) 3556 3444 Fax: (84-8) 3556 3443Email: [email protected]

PHILIPPINES:Tel: (63-2) 811 2831 Fax: (63-2) 811 2583Email: [email protected]

AUSTRALIA:Tel: (61-2) 1300 766 766 Fax: (61-2) 1300 434 682Email: [email protected]

THAILAND:Tel: (66-2) 937 0500 Fax: (66-2) 937 0501Email: [email protected]

INDIA:Tel: (91-22) 4228 8400 Fax: (91-22) 4275 5602Email: [email protected]

Visit us @ www.omron-ap.com

new cp1e with exceptional cost - trisak · fa integrated tool package cx-one cx-one lite ver.4....

Documents