new microsoft word document
DESCRIPTION
course planTRANSCRIPT
APOLLO ENGINEERING COLLEGECHENNAICourse Plan
Class:2ndyr Mechanical Subject: Engineering Thermodynamics Sem:3Faculty Name: Sridhar.V
Week No
Cumulative No.of.Hrs
Portion To be Covered
Unit-1Basic Concepts and First Law
1 1 Objective of Thermodynamic, Basic concepts2 Types of thermodynamic systems3 Classification of thermodynamic systems4 Concepts of ideal and real gas5 First law of thermodynamics and problems
2 6 Problem solving in first law of thermodynamic(cyclic process)
7 Problem solving in first law of thermodynamic(cyclic process)
8 Problem solving in first law of thermodynamic(cyclic process)
9 Concepts on first law of thermodynamic closed system(non-flow process)
10 Process explanation3 11,12,13,14,15 Problem solving in first law of thermodynamic for the following process
constant volume, constant pressure, constant temperature, reversible adiabatic process, polytropic process and throttling process.
Unit-2Second Law, Entropy and Availability
4 16 Second law of thermodynamics, Kelvin-Planck, Clausius statement17 Heat engine and refrigerator18 Carnot cycle and reversed carnot cycle19 Problem solving in second law of thermodynamics
5 20 Problem solving in second law of thermodynamics21 Problem solving in second law of thermodynamics22 Concept of Entropy, property of system, T-s diagram23 Entropy of ideal gas24 Application of change in entropy for different process25 Application of change in entropy for different process
6 26,27,28,29,30 Problem solving in entropy application for various process
Unit-3Properties of Pure Substance
7 31 Introduction, phase change process of pure substance-dryness fraction32 P-V diagram, P-T diagram, T-S diagram, H-S diagram
8 33,34,35,36,37 Problem solving using steam table for pure substance examples38,39 Derivation of standard Rankine cycle, Actual rankine cycle, Reheat,
regenerative rankine cycle9 40,41,42,43 Problem solving using rankine cycle types
Unit-4Ideal and Real gases and Thermodynamic Relation
44 Gas mixture and composition of gas mixtures45 Properties of gas mixtures
46,47 Problem solving in gas mixture48 Properties of ideal and real gases
49,50 Problem solving in ideal and real gases
Unit-5Psychrometry
51 Introduction, properties of air at atmosphere52 Dalton’s law of partial pressure53 Pshchrometric chart- dry, wet bulb temperature, dew point, specific
humidity, specific volume54 Adiabatic saturation process
55,56,57 Problem solving psychrometry58,59 Problem solving psychrometry
60 Conclusion and revision of 5 units
APOLLO ENGINEERING COLLEGECHENNAICourse Plan
Class: Final year Mechanical Subject: Total Quality Management Sem:7th
Faculty Name: Sridhar.V
Week No
Cumulative No.of.Hrs
Portion to be covered
1 Unit -1;Introduction1 Need for quality, evaluation of quality & dimension of quality2 Quality planning and quality costing3 Establishment of quality, goal and optimization of quality cost4 Dimension of manufacturing and services quality
2 5 Basic concept of TQM, leadership role in TQM6 Role of senior management in TQM, quality council and statement and
strategic planning7 Ethics, communication system in organization8 Barriers to TQM implementation
3 9 Recap on first unit and review of 2 marks and 16 marks questions
Unit -2;TQM Principles10 Introduction to leadership, leadership principle11 Situation analysis, goal objective and target12 Customer focus and customer satisfaction
4 13 Voice of customer and customer satisfaction14 Service quality and customer retention15 Human resources management16 Team work, Performance and appraisal
5 17 Continues process improvement and supplier partnership18 Recap on second unit and review of 2 marks and 16 marks questions
Unit -3;TQM Tools and Techniques -I19 Introduction about seven static tools20 Introduction about new management tools
6 21 Static quality control – the concept of variation22 Process capabilities studies23 Statically quality control24 Drawing preliminary conclusion from control chart
7 25 &26 Control chart for attributes , P-chart example problem and bench mark, C-U-Chart example problem, ( FMEA)
27 Recap on third unit and review of 2 marks and 16 marks questions
Unit -4;TQM Tools and Techniques -II28 Introduction about quality circle
8 29 & 30 Quality function and deployment31 & 32 Taguchi quality loss function
9 33 Total productive management34 Pillars of TPM Implantations of TPM and measure of TPM35 Six sigma – Introduction, Methodology and limitation36 Recap on forth unit and review of 2 marks and 16 marks questions
Unit -5;Quality Systems10 37 Introduction about quality system and importance
38 What is ISO 9000 –major element and management39 Implementation of ISO-9000-2000
40 & 41 QS -9000 , ISO -14000 Environmental management –planning , management progress& elements
11 42 Checking and corrective action43 Management reviews different between ISO 9000 and ISO 1400044 Case Studies – Public sector , TQM management commitments45 Recap on fifth unit and review of 2 marks and 16 marks questions