1

161 SwitchNormally open. 20 amp contacts. UL and CSAapproved.Replaces 161, 16100, and 67761

162 SwitchNormally open and normally closed contacts. 20amp contacts. Pal nut mount. UL and CSAapproved. Replaces 162, 16200, and 67762

163 SwitchNormally open and normally closed circuits. 20amp contacts. UL and CSA approved.Replaces 163, 16300, and 67766

1631 SwitchNormally open and normally closed circuits. 20amp contacts. UL and CSA approved.Replaces 1631 and 16310

164 SwitchNormally open and normally closed circuits. 20amp contacts. UL and CSA approved.Replaces 164, 16400, and 67759

166 Switch

Normally open and normally closed circuits. 15amp contacts. Used on Whirlpool dishwashers. ULand CSA approved.Replaces 166, 16600, and 67763

WD6X183 Switch

Normally open circuit. 15 amp contacts. Used onGE, Hotpoint & Whirlpool dishwashers. UL and CSAapproved. Replaces WD6X183 and DW440

M400947 Switch

Normally open and normally closed circuits. 20amp contacts. UL and CSA approved. Used oncommercial laundry.Replaces 006008

006163 Switch

Normally open and normally closed circuits. 25amp contacts. UL and CSA approved. Used oncommercial laundry.Replaces 006163

16814 Micro SwitchSmall switch with lever. 3/16" terminals. Normallyopen and normally closed circuits. 15 ampcontacts. UL and CSA approved.Replaces 168-14 and 16814

1682 Micro SwitchSmall switch. 3/16" terminals. Many applicationsinclude heat-release icemaker. Normally open andnormally closed circuits. 15 amp contacts. UL andCSA approved.Replaces 168-2, 16802, and 16039

18810 Light SwitchRound plunger switch. 3/16" terminals. Normallyopen circuit. Used on many brands. CSA approved.Replaces 188-10, 188-2, 188-8, 18810, 18802,18808, and 16034

18810BLK Light Switch

Round plunger switch. Black front and plunger.3/16" terminals. Normally open circuit. Used onmany brands. CSA approved.Replaces 188-10, 188-2, 188-8, 18810, 18802,18808, and 16034

18811BLK Fan & Light SwitchBlack rocker and front. Normally open andnormally closed circuits. Used on many brands.CSA approved.Replaces 188-11

1885 Fan SwitchRocker switch. 3/16" terminals. Normally opencircuit. Used on many brands. UL and CSAapproved.Replaces 188-5, 18805, 55730, and 16019

1886 Light SwitchRocker switch. 3/16" terminals. Normally closedcircuit. Used on many brands. CSA approved.Replaces 188-6, 18806, and 16029

1115373 Refrigerator Door SwitchDoor switch with NO and NC circuits. 3/16"terminals and rated 5 amps at 120 volts.Replaces 1115373

2149705 Refrigerator Door Switch

Door switch NC circuit. 3/16" terminals and rated5 amps at 125 volts.Replaces 2149705

4149377 Compactor/ Interlock Switch

Door switch with NO circuit. 3/16" terminals andrated 11 amps at 120 volts. Used as a drawer tiltswitch on compactors and as an interlock switchon many central furnaces.Replaces 4149377

310345 Range Door Switch

Switch closes when door is opened. Hole sizerequired 3/4".Replaces 310345

3196262 Range Door Switch

Plunger is 3/4" long, terminals are 1/8", rated0.25 amp at 120 volts.Replaces 3196262

4450819 Range Door Switch

Door switch with NO and NC circuits. Largeterminals rated 4 amps and small terminals ratedat 1 amp. Replaces 4450819

9781581 Range Door Switch

Plunger is 1/2" long, terminals are 3/16", rated 4amps at 120 volts.Replaces 9781581

9750896 Range Door SwitchSwitch closes when door is opened. Hole sizerequired 3/4".Replaces 9750896

Switches

Note: Some switches may have slightvariations from images shown.

2

HL103

Drain Hose ElbowUsed to couple drain hosesections together and turn 90degrees. Replaces HL103 and18-103

Each knob is 1-5/8" in diameter. Each knob has an extension on the back of1/8”. Each knob has a permanent pointer made into it that will neverdisappear through use. All knobs have a textured finish for a sure grip. Theseknobs fit many Whirlpool, Inglis, and Admiral Ranges as well as otherbrands.

Washer Parts

Range Parts

HM101

Drain Hose CouplingUsed to couple drain hosesections together. ReplacesHL101, HM102, and 18-101

85114Foot Pad

Molded rubber, 1 ¼”. For Whirlpoolleveling legs. Replaces LP932

513PFill Hose CouplingUsed to couple fill hosesections together. Can beused to couple gardenhoses.Replaces 513P and LA172

77837

Slide Mount BoltUsed in coin-op machines.Measures 6 1/8" long.Replaces 77-83-7

Knobs for Electric Ranges

ODH1Oven Door HandleFor Universal UseAvailable in 3/4" diameter material withmatching ends. Simply cut-to-length andmount with screws which are provided.

67901HControl KnobLarge diameter half-moon shaft with set screw foruniversal replacement. Replaces 67901H

ODHE1Handle Ends OnlySet of two which fit ODH1.

Knob Number Color QTY • • •20103954 White 7 5 220103925 Black 7 5 220103926 Black 4 420103929 White 4 49751126 Black 1 19751127 White 1 19751128 Black 1 19751129 Black 1 19751130 White 1 19751131 White 1 1

WH1X484 (34-0062, 35-0837)Foot PadMolded rubber, 1 1/8”. For GE, Norge,Maytag leveling legs.

3

HA11Thermostat FlangeUsed to mount regular size thermostatsover larger holes. Measures: 15/16" Centerhole. 2 5/16" Center to center mounting.Replaces HA11

HA11BThermostat FlangeUsed to mount regular size thermostatsover larger holes. Measures: 1 1/4" Centerhole. 2 5/16" Center to center mounting.Replaces HA11B

Dryer and Dishwasher Parts

VC4WTDuct Clamp-4"Spring clamp used to hold ducting overfittings. Extra long ear so no tool is neededfor installation.Replaces VC4WT, CS400, and C99

Dishwasher Rack CapsWhite vinyl caps protect the tops of the rackpins from rusting or further deterioration.DC10 package of 10DC20 package of 20DC60 package of 60DC100 package of 100DC1000 package of 1000

CR083Cold RightUsed as a dehydrant forrefrigeration systems.Replaces CE434

Plasti-Fix

TABS plastic repair. Can be used torepair cracks or rebuild broken areasof door liners or cabinet liners.PFS041 WhitePFS045 Almond

417

Drain BlasterHooks up to air tank orrefrigeration hose to use as ahigh pressure blow-out fordrains.

Refrigeration/Chemicals

USB26Universal Shelf Bar MaterialThick aluminum channel material cut to length of 25 1/2". Brushed finish will notshow fingerprints. Material is 1 1/2" tall. Works with shelf bar ends for Whirlpoolnumbers 839904, 912361, and 912583. Also fits some GE end caps and someAdmiral end caps. Can be easily cut with hack saw. Super heavy duty material.

Refrigerator Door Shelf Bar

An innovative new product that everyone needs to keep in stock.....

USB1(Bent Wire Type)Strong wire bent back on itself and made to fit the above shelfbar. Install by making two 1/8" holes in the door liner 1 1/4"apart at each end. Fit the bent wires into the bar and slide theminto the door liner holes. These will expand and stay put.Replaces Admiral number 55556-1, GE WR2M992 and others.Works on right or left side.

USB2(New Design Plastic Ends)These ends are made to fit inside the shelf bar materialand use self-threading screws to hold the bar on the doorliner. They are easily installed with only a screwdriver.Distance from door liner is approximately 1 1/4". Workson right or left side.USB2 for WhiteUSB2A for Almond

Universal Shelf Bar Ends for Above Material

USB27

This package contains:oneUSB26 shelf bar and two USB1ends.

Packages Containing Kits of the USB26 Bar and Ends

USB28USB28AThis package contains: one USB26shelf bar and two USB2 ends.

4

Wire Connectors

Plastic with Metal CoreOrder# Color Container QTY Style Min Max331P Orange Box 100 H 2#18 3#14331M Orange Bulk Box 1000 H 2#18 3#14331KP Orange Bulk Bag 500 H 2#18 3#14333P Yellow Box 100 G 1#14 & 2#18 1#10 & 2#14333M Yellow Bulk Box 1000 G 1#14 & 2#18 1#10 & 2#14333KP Yellow Bulk Bag 500 G 1#14 & 2#18 1#10 & 2#14335P Red Box 100 F 2#16 & 2#18 3#10335M Red Bulk Box 500 F 2#16 & 2#18 3#10335KP Red Bulk Bag 250 F 2#16 & 2#18 3#10

High Heat CeramicOrder# Color Size QTY StyleT1164C Ceramic Small 100 AT1164 Ceramic Small 15 AT1165C Ceramic Medium 100 BT1165 Ceramic Medium 15 BT2070C Ceramic Large 100 CT2070 Ceramic Large 10 C

612771Wire Terminal1/4" regular temperature rated.Used with 14-10 gauge wire.

Wire Terminals

425661Wire TerminalBrass 3/16" high temperature rated.Used in high-heat applications.Used with 16-14 guage wire.

424701Wire Terminal

1/8" regular temperature rated.Used with 16-14 gauge wire.

41729Wire Terminal

1/4" regular temperature rated.Used with 16-14 gauge wire.

High Heat Bakelite with Metal Core-Rated at 150 °C (302 °F)Order# Color Container QTY Style Min Max29 Black Box 100 E 1#20 & 1#22 2#1629BP Black Bulk Pack 1000 E 1#20 & 1#22 2#1629BK Black Bulk Pack 10000 E 1#20 & 1#22 2#1629KP Black Bulk Bag 10000 E 1#20 & 1#22 2#1630 Black Box 100 E 3#20 3#1630BP Black Bulk Pack 1000 E 3#20 3#1631 Black Box 100 E 2#20 4#1631BP Black Bulk Pack 1000 E 2#20 4#1633 Black Box 100 E 2#18 4#1433BP Black Bulk Pack 1000 E 2#18 4#1435 Black Box 100 E 2#14 3#16 & 3#1235BP Black Bulk Pack 1000 E 2#14 3#16 & 3#1237 Black Box 50 E 1#14 & 2#12 4#1037BP Black Bulk Pack 500 E 1#14 & 2#12 4#101SH* Black Box 100 E 2#18 4#14

2SH* Black Box 100 E 2#14 1#12 & 2#10

* These have a separate internal bushing with a set screw for large wires.

• CSA and UL Approved• Plastic models have copper coated spring to grip wires inside.• Deep serrations on surface for sure grip when turning.

A B

E F G H

C

5

HYP38

SSD w/90° Elbow

DWD8L

DWD8C

HYP38“Y” MIXER HOSE

Quality Replacement Hose for All Washers & DishwashersInlet (3/8” I.D.)

• Burst strength test of 800 PSI (cold water), 600 PSI (hot water)• Double crimped ends provide added fitting strength• Ozone (rubber decay) resistant to withstand 200 hours, oven aging at 212°• Product Liability Insured

CUFE

SSD-50

GNB

CUFA

SSD

w/90° ElbowPart No. Size Connector

SSD6EL 1” I.D. x 6ft. 1”, 1 1/8”, 1 ¼”SSD8EL 1” I.D. x 8ft. 1”, 1 1/8” , 1 ¼”

CUFE

Elbow Connector 1”, 1 1/8”, 1 ¼”Replaces: GE WH49X177, WH41X184 and ALLOTHERS

Part No. Size ConnectorSSD6 1” I.D. x 6’ 1” x 1 1/8”, 1 ¼”SSK8 1” I.D. x 8’ 1” x 1 1/8”, 1 ¼”SSD6GE 1” I.D. x 6’ 1” x 1 1/8”, 1 ¼”SSD8GE 1” I.D. x 8’ 1” x 1 1/8”, 1 ¼”

SSD501” I.D. 50’ Coil

SSD-6

DWD8C (65020)DRAIN & FILL ASSEMBLY

Complete assembly with 8’ high pressure fillhose, 8’ drain hose attached to Deluxe Coupler

DWD8L

DRAIN ASSEMBLY

8’ drain hose permanentlyattached to Deluxe Coupler

GNB

1” I.D. Gooseneck

CUFA

Triple Connector 1”, 1 1/8”, 1 ¼”

SERVICE KITSelf Storing Carton

SSD50K includes:50’ SSD Hose6 ea. GNB Gooseneck6 ea. CUFA Connector1 ea. Can PVC Cement

SSDWK includes:100’ SSDW Hose24 ea. DWLC Connector1 ea. Can PVC Cement

Dishwasher Hose

High Pressure Hose

SSD Washer Drain HoseTotal universal design in profit making drain hose

FOR COMMERCIAL • DOXON, UNIMAC½” x 4’ 5004FF½” x 5’ 5005FF½” x 6’ 5006FF¾” x 5’ 7505FF

Length Part No. Part No. Part No.3 feet 3803FF 3803FE 3803MF4 feet 3804FF 3804FE 3804MF5 feet 3805FF 3805FE 3805MF6 feet 3806FF 3806FE 3806MF8 feet 3808FF 3808FE 3808MF10 feet 3810FF 3810FE 3810MF12 feet 3812FF 3812FE 3812MF15 feet 3815FF 3815FE 3815MF

6

DRAIN HOSEPart No. Size91183 15/16” x 30”96743 15/16” x 44”

Drain Hose

Goosneck x 90° Elbow

Part No. Dimensions1004 15/16” I.D. x 4”1005 15/16” I.D. x 5”1006 15/16” I.D. x 6”

Part No. Dimensions2004 ¼” x 4”2005 ¼” x 5”2006 ¾” x 6”Elbow expands to 7/8”, 1” dia.

Part No. Dimensions63154 1” I.D. x 4”63151 1” I.D. x 5”63156 1” I.D. x 6”Elbow expands to 1 1/8”, 1 ¼” dia.

Gooseneck x 90° Elbow(expanded)

Drain/Service Parts

OUTLET HOSEPart No. Size96746 15/16” x 31”91182

PUMP-OUTLET(Speed Queen)Part No.21254

PUMP-DRAIN(Whirlpool)Part No.21114

UNIVERSAL CONNECTOR HOSE

Part No. Size

SD75125 ¾” x 1” x 1 11/4”

(Maytag)Part No.211107, 212989

NON-PRESSURE DRAIN HOSE

Black Smooth Synthetic RubberPart No. Description

B150 15/16” I.D. x 50”Package: 50’ Carton

BULK HOSE

BRAIDED (Pressure Rated) DRAIN HOSE

• Dishwasher Drain• All Plumbing Connections

Part No. Description

B5050 ½” I.D. x 50”B6350 5/8” I.D. x 50”B7550 ¾” I.D. x 50”B8850 7/8” I.D. x 50”Package: 50’ Carton

UDA125

FLEXIBLE DISPOSER DRAIN ADAPTOR KIT

• Quick and easy connection saves time and money!• Replaces HP422

Universal Dishwasher Drain Hose

SSDW7 SSDW100

DWLC

SSDW75/8” I.D. x 7ft.(5/8”, x 5/8”, ¾”, 1 ¼”) Connector

SSDW1005/8” I.D. 100’ Coil

DWLCUniveral Drain Connector

Fits All Dishwasher Connectors

HOSE WASHERS

RW79 Black Neoprene, Hot water, aging resistantHM101 White, high-impact resistant polyethylene

7

Belt No. Cross Reference Belt Type

CissellTU8930 Multi-V

Franklin • Gibson • Hamiliton • Kelvinator11-14 Wrapped11-111 73382 Mulit-V26122 29-41 Round27259 Multi-VF61618 WrappedF63510 85259741 Multi-VF65752 WrappedF65753 WrappedF73382 11-111 Multi-VF73466 WrappedF77011 14772, 8027638 WrappedF78448 3276623, WE12x51, 79 Multi VF78794 3280326, 133171, 131324 Bareback

8004064, 3204418, 14667,145371, 3161152, 85216961,85258672, 85269208WH7x86, 131234

F131602 639357, 3161099, Multi-V85256009, WE12x85

F131654 8001651, 8057424, Multi-V85259261, 141297

F133171 3280326, F78794, 8004064, Bareback3161152, 3204418, 144667,85216961, 85258672,85269208, WH7x86

F139318 Q181625, 8001832, Bareback8011289, 85271164

F141297 8001651, 8057424 Multi-VF143056 Q63807 FlatF144667 3204418, 145371 BarebackF145371 3204418 BarebackF148270 WE12x42 Multi-VF148271 3283287 Bareback131234000 8002451, WH7x113 Bareback

Frigidaire/WCI • Webster City638806 2834353 Wrapped638957 Multi-V639357 136102, 85256009, 3161099, Multi-V

WE12x856567783 Wrapped1134393 634914 Cogged1134395 634913 Cogged2834353 638806 Cogged3161099 136102, 639357 Multi-V3161152 3280326, F78794, Bareback

F133171, 80040643203018 Q607581 Multi-V3204314 145221 Flat3204418 3280326, F78794, F133171,

131234, 144667, 145371 Bareback3261151 Q12970, 8015096, 88020626 Wrapped3276623 F78448, 199B2222, WE12x51, 79 Multi-V3280326 F78794, 133171, 131234, Bareback

14667, 145371, 3161152,3204418, 8004064, 85216961,85258672, 85269208, WH7x86

3281154 Q63807, Q63811, Q63812, Flat143056, 8015141, 85255134,85263625, 85183753

3283287 148271 Multi-V3283471 148270, WE12x42 Multi-V

Frigidaire/WCI • Webster City7529550 Wrapped7529591 691371, 298422, 337924, Round

296326, 2387397537239A 85256955 Wrapped8001651 8057424, 131654, 141297 Multi-V8001832 Q181625, 8011289,F139318, Bareback

139318, 8006498, 852711648002451 131234000, WH7x113 Bareback8004064 3280326, F78794, Bareback

F133171, 31611528006498 Q181624, Q181621, Q63259 Bareback8011289 Q181625, 8001832, 8006498, Bareback

F139318, 139318, 852711648015096 3261151, Q12970, 88020626 Wrapped8015132 3261155, Q62149, Q62145 Wrapped8015133 Q62152, 3261153, 85026594 Wrapped8027638 F78448, WE12x51, 79 Bareback9949082 Timing

Frigidaire/WCI • WestinghouseQ12966 WrappedQ12967 3261155 WrappedQ12969 WrappedQ12970 3261151, 8015096, 88020626 WrappedQ12973 WrappedQ62148 BarebackQ62149 3261155, 8015132,

85025708, 211451, Q62145 LaminatedQ62150 Q12971, Q12975 BarebackQ62152 3261153, 8015133, 85025694 LaminatedQ63255 WE12x5009 WrappedQ63257 900662 WrappedQ63805 FlatQ607581 3203018 Multi-VQ622451 BarebackQ63807 Q63806, 08, 09, 10, 11, 12, 3281154 Flat

3204314, 143056, 145221,85114786, 85183753, 85255134

8001832 Q181625, 8006498, 8011289, Bareback85182773, 85271164, 139318,Q181622, 23

8006498 Q181624, Q181621, BarebackQ63259, 60

General Electric • HotpointWE12M22 WE120122 Multi-VWE12x31 Multi-VWE21x36 WE12x96, 109B3872, WE12x34 Multi-VWE12x42 WE12x82, WE12x49, 148270, Multi-V

109B8327, 85230352,85231278, 85258117

WE12x43 WE12x49, 85231278 Multi-VWE12x46 85231251 Multi-VWE12x49 WE12x43, 85231278 Multi-VWE12x51 F78448, WE12x79 Multi-VWE12x79 WE12x51, F78448, 199B2222 Multi-VWE12x82 WE12x42, 85230352, 85258117 Multi-VWE12x85 639357, F131602 Multi-VWE12x5009 543581 WrappedWH1x2026 109B4949, 85235133 WrappedWH1x5089 502023, 521367 CoggedWH7x86 3280326, 8004064, F133171 Bareback

Belt No. Cross Reference Belt Type

Special Appliance Belts

8

Belt No. Cross Reference Belt Type Belt No. Cross Reference Belt Type

Special Appliance Belts

Hoover14123W 845750 Round14124W 845760 Round162507 3-13328 Multi-V716882 Cogged734843 Round807620 14122, 807020 Cogged904604 Wrapped

HuebschM400315 LT128, 286284 Multi-VM400607 ST128 WrappedM400608 St128-1 WrappedM401182 TT128 WrappedM406386 Cogged430104 Multi-V

Maytag14772 F77011 Wrapped2-11124 85222090 Wrapped2-11125 85222104 Bareback2K11124/25 Set, Bagged Wrapped2-11451 Q62149 Wrapped2-51021 Round2-51023 Wrapped3-11012 Wrapped3-11103 Wrapped3K11012/13 Set, Bagged Wrapped3-12512 55060 Round3-12544 Multi-V3-12959 3-14774, 85237934, 85223232 Multi-V3-13328 162507 Multi-V3-14774 3-12959 Multi-V9-2115 9-11197 Round

Norge • Admiral33-0388 Wrapped34-5096 Wrapped35-0425 33-6104, 35-0465, 43-0283 Wrapped35-2320 35-3662, 35-2073 Laminated35-0465 Laminated36-4378 Multi-V36-4379 Multi-V39-0732 53-1589 Multi-V53-0186 53-1080, 341241, 345473, Multi-V

660996, 695055, 85237934,85264400

53-1080 341241, 53-0186 Multi-V53-1512 Multi-V53-1589 39-0732, 349533 Multi-V60-1267 Wrapped63-1402 63-4793, 63-4984, Multi-V

K1025646, K103630763-3201 63-1167 Laminated63-3410 Wrapped63-4663 63-3161, 63-3862, 63-5007 Multi-V

85152904, 8515702763-4664 63-4164, 63-4064 Multi-V

85170058, 8518579963-6035 Wrapped63-6333 Wrapped73-0028 Multi-V

Speed Queen • Amana3967X Cogged20185X Cogged20186X Cogged20895X Cogged23758X Cogged23759X Cogged27155X Cogged27246 28808 Bareback28043 Cogged28808 27246 Bareback33843 Bareback35517 Bareback430104 Multi-V50171 Wrapped51994X Cogged52114 Wrapped52115 Wrapped52556 Multi-V55059 Multi-V55060 3-12512 Round56095 Multi-V59174 661570, 3389728 Multi-V90587X CoggedR0606524 56095, 85232797, 237555 Multi-VR0606539 28808, 85232541 BarebackR0606549 59174 Multi-V

Whirlpool • Kenmore14951 Wrapped14952 Notched234694 19427 Cogged237555 56095 Multi-V237683 Multi-V286284 LT128, M400315 Multi-V337019 Multi-V337388 Multi-V341241 53-1080, 53-1086, 660996, Multi-V

695055, 345473, 3394651,85257934, 85264400

342821 Multi-V345675 3394652 Multi-V349533 53-1589, 660997 Multi-V356402 Multi-V3934700 Laminated661570 59174, 3387610, 3389728, Multi-V

3393999691371 298422, 238739,296326, Round

337942, 752959195405 85264109 Notched96388 352967 Laminated

Microwave BeltsO239002 Maytag, Magic Chef RoundO7020153 Maytag, Magic Chef Flat192010 Microtronics Round3011495 Tappen Round313646 Whirlpool Round3206949 Tappen Round4060B60 Panasonic Flat4060-00 Panasonic Flat4060-850 Panasonic Flat4110-00 Panasonic Round4110-820 Panasonic Round4110-850 Panasonic Round4110-860 Panasonic Round

9

Belts

BJ10 Belt-Jack Instant Belt TightenerDesigned to set belt tension and to help align pulleys on all belt driven units including blower motors,compressors, transmissions, and automotivecomponents.

Features• Increases belt life • Easy one hand operation• Prevents motor overloading • Opens to 4 1/2" to 15" with extender• Eliminates crowbar use • Heavy duty 3/8-16 thread• Eliminates belt damage

WH1X1944Drive SplineRubber and Aluminum drive spline usedon GE/Hotpoint and J.C. Penney washingmachines.Replaces WH1X1944 and LP301

WH1X1986Support for SplineRubber support used on GE/Hotpoint andJ.C. Penney washing machines.Replaces WH1X1986 and LP701

WH8X291 (WH8X280)Top Shaft Seal

Agitator Shaft Seal used on GE/Hotpointand J.C. Penney washing machines.Replaces WH8X291 and LP602

WH8X291K

Seal Kit

Replaces LP603

WH8X291P

Top Shaft Seal

Same as above but less metal base

WH8X281 (WHPX215)Lower Housing Oil Seal

Rubber lip seal used on GE/Hotpoint andJ.C. Penney washing machinetransmissions. Replaces WH8X281 andLP604

WX5X1325

Spanner ToolUsed on GE/Hotpoint and J.C. Penneywashing machines built since 1995 toremove large nut under agitator driveblock. Replaces WX5X1325

WX1X2083

Clamping BlockChrome bar used on GE/Hotpoint and J.C.Penney washers to lock basket hub inplace. Replaces WH1X2083

WZ1X32

Clamping Block BoltChrome bolt used on GE/Hotpoint and J.C.Penney washers to lock basket hub blockclamp in place.Replaces WZ1X32

WH8X367Lower Plastic Housing Cover Seal

Rubber gasket ring used on GE/Hotpointand J.C. Penney washing machinetransmissions.Replaces WH8X367

WH8X242Lower Metal Housing Cover SealGasket ring used on GE/Hotpoint and J.C. Penneymetal housing washing machine transmissions.Replaces WH8X242

WH17X69Tub SupportTub support attaches to top of transmissions onboth large and standard capacity models. Useduntil 1995. Replaces WH17X69

WH8X305

Outer Tub Top Rubber Gasket

Thick black rubber gasket used on GE/Hotpointand J.C. Penney metal washing machine outertub. Replaces WH8X305 and LP656

WH43X102

Spiral Agitator

Will replace straight vane or spiral vane modelsfor large capacity tubs. 17" TallReplaces WH43X102 and WH43X93

WH43X87

Spiral Agitator

Will replace straight vane or spiral vane modelsfor standard capacity tubs. 15½” Tall ReplacesWH43X87and WH43X91

WH23X42

Pump

Used until 1995 on almost all GE/Hotpoint andJ.C. Penney model full sizes washers.Replaces WH23X42 and LP112

WH49X231Single Speed Clutch

Used until 1995 on almost all GE/Hotpoint andJ.C. Penney model single speed full sizeswashers. Replaces WH49X231

WH49X265Two Speed ClutchUsed until 1995 on almost all GE/Hotpoint andJ.C. Penney model two speed full sizes washers.Replaces WH49X265

WH8X246

Star Boot

Molded black rubber boot, tub to transmission.

Used until 1995 on almost all GE/Hotpoint andJ.C. Penney model full sizes washers.Replaces WH8X246 and LP510

WH41X91

Tub to Pump HoseFor GE Automatic washers, models (V) throughcurrent and (P) series.

For G.E. Washers

10

Motor Relays for GE/Hotpoint & JCPenney

WH12M70Motor start relay for GE/Hotpoint washers.Replaces WH12M70

WH12X235Motor start relay for GE/Hotpoint and J.C. Penney washers. For use with up to3/4 HP motor built 1961 to 1995.Replaces LP230 and WH12X235

WH12X400Motor start relay for GE/Hotpoint and J.C. Penney washers. For use with up to3/4 HP motor built 1966 to 1969.Replaces LP231 and WH12X400

WH12X468Motor start relay for GE/Hotpoint and J.C. Penney washers. For use with up to3/4 HP motor built 1969 to 1981.Replaces LP232 and WH12X468

WH12X494Lid SwitchUsed on all GE/Hotpoint and J.C. Penney model full size washers until 1995.Replaces WH12X494

WH2X10032Tub SealUsed on all GE/Hotpoint and RCA model full size washers until 1995.Replaces WH2X10032

WH1X2089Lid Switch Actuator PadUsed on GE/Hotpoint and RCA model full size washers since 1995.Replaces WH1X2089

WH1X2727Suspension StrapUsed on GE/Hotpoint and RCA model full size washers since 1995.4 PermachineReplaces WH1X2727 Spiral Agitator

For G.E. Washers

11

For G.E. Dryers

WE12M8 (WE12X81)Idler PulleyWhite idler used on most full size GE/Hotpoint and J.C. Penney dryers.Replaces WH1X1944 and LP301

WE12X47Idler Pulley/BushingsBlack idler used on most full size GE/Hotpoint and J.C. Penney dryers.Replaces WE12X47

WE1X759Idler Bushings OnlyUsed two per idler.Replaces DE400 & WE1X759

WE12X42 (WE12X82)Drum BeltUsed on most full size GE/Hotpointand J.C. Penney dryers. 87.8" Longwith four ridges. Replaces LB216,WE12X42, and WE12X82

WE25X62 (WE25M40)Drum Shaft Kit

Drum shaft used on General Electric/Hotpoint and J.C. Penney dryers.Replaces WE25X62 and DE725

WE25X62K

Bearing Kit for Drum Shaft

Drum Bearing kit used on full size GE/Hotpoint and J.C. Penney dyersReplaces WE25X62K

WE3M15 (WE3X75)Drum Bearing

Drum bearing used on full size GE/Hotpoint and J.C. Penney dryers.Replaces WE3M15, WE3X72,WE3X75, and DE726.

WE3X37

Drum Bearing

Old style drum bearing used on fullsize GE/Hotpoint and J.C. Penneydryers.Replaces WE3X37 and DE726R

WE25M15Idler Package Kit

Idler wheel with shaft, thrust bearings,mounting nut, and retainer clip forgeneral use.Replaces WE25M15

WE13X93

Drum Support

Front drum support and glide used onlarge capacity full size GE/Hotpointand J.C. Penney dryers. Contains 1.Replaces WE13X93 and DE730

WE25X60 Double(WE13M23 Single)Drum Support / Glide

Front drum support and glide used onregular capacity full size GE/Hotpointand J.C. Penney dryers. WE25X60contains 2, WE13M23 contains 1.Replaces DE730

WE13X68KGlide for Drum SupportFront drum glide used on full size GE/Hotpoint and J.C. Penney dryers. Uniquesplit rivet attachment for quick install withouttools. Replaces WE13X68K and DE729

WE3X87Drum GlideFront drum glide used on full size latemodel GE/Hotpoint dryers. Used 5 perdryer. Measures: 2 ¾” X ½”.Replaces WE3X87High quality Teflon material

WE1M316Drum GlideFront drum glide used on full size latemodel GE/Hotpoint dryers. Used 4 perdryer. Measures: 2 ¾” X 5/8”.Replaces WE1M316High quality Teflon material

GE1 Update Package

Contains two slide assemblies, drumbearing and WE12X42 belt. Used on GE/Hotpoint and J.C. Penney dryers.

GE2 Update Package (WE25X60)Contains four drum slides, drum bearing,idler and WE12X42 belt. Used on GE andHotpoint dryers.

GEU2 Update Package

Contains four drum slides, drum bearing,idler and WE12M22 belt. Used on GE andHotpoint dryers.

WE1M305 White Door Handle

WE1M342 Almond Door Handle

Plastic snap-in handle for dryer doorused on late model GE/Hotpoint dryers.Horizontal style. Measures: 4 3/8” X1½”. Replaces WE1M305 / WE1M342

WE1M381 (WE1X1188)White Door HandleWE1M380 (WE1X1201)Almond Door Handle

Plastic snap-in handle for dryer doorused on late model GE/Hotpoint dryers.Vertical style. Measures: 7¼” X 1½”.Replaces WE1M381 (WE1X1188) whitecolor and WE1M380 (WE1X1201)almond color

WE18X26

Lint ScreenLint filter with heavy duty metal frame

used on large and regular capacity GE/Hotpoint and J.C. Penney dryers.Replaces WE18X26, Q137504,5300137504 and DE520

12

WD19X44Support Nut/GasketActs as seal for top of support under spray arm.Replaces WD19X44

WD8X157Gasket OnlyAs above. Replaces WD8X157

WD22X114Spray Arm SupportUsed on GE/Hotpoint and J.C. Penney dishwashers.Replaces WD22X114 and DW112

WD1X5488Rubber Check ValveUsed on GE/Hotpoint and J.C. Penney dishwashers tocontrol remaining water level after drain cycle. Used inWD22X114 listed above. Replaces WD1X5488

WD22X71

Spray Arm Hub

Hub with raised top and bearings for use with WD22X94.

Replaces WD22X71 and DW113

WD22X89 (WD22X110)

Spray Arm Hub

Used with WD22X114 support. Flush top and supplied

with bearings. Replaces WD22X89 and WD22X110

WD12X235

Hub Bearing

Plastic bearing for use with WD22X71 and WD22X110

spray arm hubs. Used two per machine. Replaces

WD12X235

WD26X10013

New Design Pump Package

Replaces all side style dishwasher pumps since 1970. All

par ts needed for conversion are included. Replaces

WD26X74, WD26X77, WD26X79, WD26X81,

WD2610013 and others

WD12X106

Slinger for Pump Shaft Seal

Aligns shaft seal and acts as slinger for any seeped

water. Replaces WD12X106 and DW104

WD17X57

Seal and Impeller Package

Repair kit for WD26X74 and WD26X77 dishwasher

pump. Replaces WD17X57 and DW105

WD8X181

Gate Arm Shaft Seal

Replaces shaft seal for gate arm which operates drain/

wash function in WD26X74 and WD26X77 pump.

Replaces WD8X181

For G.E. Dishwashers

WD12X5028Round Sump CoverSump Cover used on GE/Hotpoint and J.C.Penney dishwashers. Replaces WD12X5028

WD7X14Door CableDoor cable used on GE/Hotpoint and J.C.Penney dishwashers. Also on some MagicChef, Jenn Air, and Tappan.Replaces WD7X14, 2190-0001, and DW309

WD8X227Corner Door GasketLeft side corner gasket. Used on plastic tubmodels built by GE. Replaces WD8X227

WD8X228Corner Door GasketRight side corner gasket. Used on plastic tubmodels built by GE. Replaces WD8X228

WD3X749Soap Cup Door SpringSmall spring used on plastic tub models withround soap cup cover built by GE.Replaces WD3X749

WD6X183

Door Switch

Door latch switch. Replaces WD6X183 andDW440

WD13X61

Door Latch

Replaces WD13X61 and DW604

WD22X135

Lower Spray Arm

Replaces metal and plastic spray arms using

either WD22X110, WD22X71,or WD22X126

support hubs. Replaces WD22X135

WD1X5500

Bellows Seal

Used on GE/Hotpoint and J.C. Penneydishwashers. Seals between lower spray armand upper wash tower. Replaces WD1X5500

WD22X78Tower Section

Used on GE/Hotpoint and J.C. Penney dishwashers. Top section of two-piece tower.Replaces WD22X78

WD22X120Pop-up TowerUsed on GE/Hotpoint and J.C. Penney dishwashers. Telescoping tower for lower sprayarm. Fine thread base. Replaces WD22X120

Door Springs

WD1X1147

Door SpringUsed on plastic-tub GE/Hotpointand J.C. Penney dishwashers.Used two per machine.Unstretched length 6 ½”.Replaces WD1X1147

WD1X1154

Door SpringUsed on GE/Hotpoint and J.C. Penneydishwashers. Used two per machine.Unstretched length 6 ½”.Replaces WD1X1154

WD1X820 (WD1X1308)Door SpringUsed on plastic-tub GE/Hotpoint and J.C.Penney dishwashers. Used two permachine. Unstretched length 6 ½”.Replaces WD1X820 and WD1X1308

WD1X1333 Door Spring

Used on GE/Hotpoint and J.C.Penney dishwashers. Used two permachine. Unstretched length 6 ½”.Replaces WD1X1333

13

WB23X33Push Button SwitchSix button switch used on older GErange tops.Replaces 19033 and WB23X33

WB2M535Hinge AssemblyOven door hinge for range. Used rightor left. Replaces WB2M535

For G.E. Ranges

WB10M196Hinge AssemblyOven door hinge for range.Replaces WB10M196Fits Canadian Models

WB10M197Hinge AssemblyOven door hinge for range.Replaces WB10M197

Door Springs

WB2M538Oven door spring for range.Unstretched length 9 ¾”.Replaces WB2M538

WB9M39Oven door spring for range.Unstretched length 5 3/4”.Replaces WB9M39

WB9M40Oven door spring for range.Unstretched length 8 ¼”.Replaces WB9M40

For G.E. Refrigerators

WR2M1524

Defrost Drain Tube

Carries away drain water from underevaporator. Replaces WR2M1524, 401951-101, and 5300101623

WR2M1628

Evaporator Fan Cover

Fan cover for freezer section. ReplacesWR2M1628 Fits Canadian Models

WR2M1632

Shelf Bar End Cap

Screw-on model. Measures: 2” Tall by 2 ½”Deep. Replaces WR2M1632Also for Universal Use

WR2M1633

Shelf Bar End CapScrew-on model. Measures: 2” Tall by 1 ½”Deep. Replaces WR2M1633Also for Universal Use

WR2X7232

End Cap For Door BarPlastic support for door shelf bar. Fits right orleft side. Replaces WR2X7232

WR2M992

U-Bend Type End Cap For Door Bar

Bent wire type support for shelf bar. ReplacesWR2M992

WR13M157Lower Evaporator Door Hinge

Supports bottom of evaporator door. ReplacesWR13M157.Also for Universal Use

WR2M1397

Upper Evaporator Door Hinge Bushing

Adjusts and supports upper evaporator doorhinge pin. Replaces WR2M1397Also for Universal Use

WR2M1401

Upper Evaporator Door Hinge Pin

Hinge/Pivot for top of evaporator door.Replaces WR2M1401Also for Universal Use

WR2M1400

Hinge Pin Spring

Hinge spring for evaporator door. Two used perrefrigerator. Replaces WR2M1400

WR37M229

Evaporator Door PanelInner evaporator door liner for 10 cubic footconventional refrigerator. Replaces WR37M229

12RA29658Evaporator Door Package

Evaporator door for 10 cubic foot conventionalrefrigerators. Comes with hinges, springs, innerand outer panels (WR37M229).Replaces 12-RA2965-8

WR2M1886 (WR2X4901)Door Cam Riser (Closer)Used in pairs at the bottom of side by sidedoors to assist in closing doors and keepingthem closed. Very tough reinforced material.Replaces WR2M1886 and WR2X4901

261

Heater Tube HolderUsed to make regular glass tube defrost heatersfit into GE brackets.

14

17288 (97606)HOSE, WATER LEVEL

Tub to water level float cup or vacuumswitch. For WHIRLPOOL automaticwashers.

BUMPERS

17258

93770

Molded Gray rubber lid bumper forWHIRLPOOL automatic models.

93553

TUB GROMMET

Outer tub to bottom, catcher or lint filter forWHIRLPOOL, KENMORE automatics.

21365

CAP WASHER

Tub mounting washer and agitator cap washerWHIRLPOOL automatic models.

383727 (96690)TUB CENTER GROMMET

Center post gasket. Fits WHIRLPOOL, KENMOREautomatics. Large tub seal used at top of neck ofouter tub to seal against drive tube and drive block.

Replaces LP633, 96690, and 383727.

356934

CENTER POST – LARGE UPPER SEAL

Replacement for WHIRLPOOL Upper Spin TubeSeal. For all WHIRLPOOL Washers 1950 thru 1981.

For Whirlpool Washers

3363394Direct Drive Washer PumpUsed on direct drive washers since1982. Replaces LP116, 3352492,and 3363394

350365Belt Drive Washer PumpTwo hoses with metal pulley.Matches 95405 notched V belt.Replaces LP115 or 352967 V Belt

350365NBelt Drive Washer PumpSame as 350365 but with narrow Vmetal Pulley. Matches 96388 or35267 V Belt

Pumps for Whirlpool Washers

350367Belt Drive Washer PumpFour Hose model with metalpulley. Matches 35405 notched VBelt Replaces LP114 and 350367

350367NBelt Drive Washer PumpSame as 350367 but with narrowV metal pulley Matches 96388 or352967 V Belt

17258 93770

15

16015Shift Arm SpringShift arm spring located insideWhirlpool/Kenmore belt drivetransmissions.Replaces 16015

285672Spring Seal PackageUsed inside belt drive Whirlpool/Kenmore transmissions to seal mainshaft. Replaces LP925, 92814K,92815, & 285672

285036Drive ShaftOven main drive shaft used onWhirlpool/Kenmore belt drivetransmissions. Measures 25 ½” long,end to end.Replaces 285036 and LP404

84467Pinion ShaftUsed in belt drive Whirlpool/Kenmoretransmissions. Large drive pulleyattaches to this shaft.Replaces 84467

89997Drive Pulley & Set ScrewMain transmission drive pulley. CastIron. Has narrow groove for 352967/96388 belt.Replaces 89997 and 20010096

360840Drive Pulley and Set ScrewMain transmission drive pulley. CastIron. Has wide groove for 95405 belt.Replaces 360840

355345Set ScrewUsed on both of the above pulleys.

95089Gasket For Transmission Cover

Cork material provides excellent oilseal Replaces 16002 and 95089

17261Superstructure Spring

Holds brake yoke down and in position.Replaces 17261, 20055265, andLP912

356444Brake Yoke ClipSnaps into hole in yoke to keep oneside in position. Plastic to allow quietoperation. Replaces 356444

Whirlpool Belt Drive Washers

20053657 (18642K)Agitate Cam Bar and PlungerAgitate Cam Bar & Plunger already installedfor quick replacement.Replaces 18642, 20053657, and LP250Order 18642 for cam bar without plunger.

20053658 (350532K)Spin Cam Bar and PlungerSpin Cam Bar with Plunger already installedfor quick replacement.Replaces 350532, 20053658, and LP251Order 350532 for cam bar without plunger.

84866Plunger for Wig-WagTwo used per washer. Attaches to cam bars.Replaces 84866

95462Cam Bar GuidePlastic sleeve used as guide for cam bar.Replaces 95462

90456Cotter Pin For PlungerTwo used per washer. Attaches cam bars toplungers. Replaces 90456 and 82-456

350384Plunger Kit for Wig-WagTwo used per washer. Attaches to cam bars.Contains 84866, 90456, and 95462 inpackage. Replaces 350384 and CMK170

285134Bearing & Seal PackageCenterpost bearing and seal kit for 18#machines using short spin tube.Replaces LP731 and 285134

359449 (54209)Oil Seal for Center PostCenter post oil seal.Replaces 54209 and LP634

89090 (359398)Bearing for CenterpostTall bronze bearing used in centerpost.Replaces 89090 and 359398

16

359397Bearing for CenterpostShort bronze bearing used in centerpost.Replaces 354195, 354196 and 359397

99618Bearing and Seal PackageUsed on full size models that use a longdrive tube. Replaces 99618 and LP730

285136Bearing and Seal PackageUsed on compact models that use amulti-groove belt. Replaces 285136

Drive Tube (Spin Tube)Drive tube for center shaft.383921 is 18 ½” long Replaces LP406383928 is 13 ¼” long Replaces LP408

91939 (17248)Shaft SealTop shaft lip seal used where main driveshaft exits top of drive tube. Steel inser t,rubber covered. Use with 76674, 350000drive spin tube. For all 18918 Whirlpoolautomatic models to current.Replaces LP632 and 91939

356427Secondary Shaft SealShaft seal used where main drive shaftexits drive tube and under 91939.Replaces 356427

76673Tub Bolt KitAll parts needed to repair leakage aroundWhirlpool tub mounting bolts.Package of 4 stainless steel hex-headbolts, 4 stainless steel and 4 rubberwashers. Holds outer tub in place.Replaces 76673 and LP655

17235Lower Tub Bolt SealFiber washer used to seal below outertub. Used with 76673 package above.Replaces 17235

383727Tub Seal (Doughnut)

Large tub seal used at top of neck ofouter tub to seal against drive tube anddrive block.Replaces LP633, 96690, and 383727

350920“T” BearingSupports basket drive tube on mainshaft. Replaces 350920 and LP319

358336SnubberSnubber pad used at top of cabinet onspring bracket to dampen vibration of tubduring spin. Replaces LP318 and 358336

85114Foot PadRubber foot pad for metal leveling legs.Replaces 85114 and LP932

Basket Drive Spring354276 (Red)96409 (Blue)Basket drive springs used to provideproper tension on clutch drive plate. Fourper machine.Replaces 96409 and 354276

96568 Agitator Cap SealRubber washer used to seal top ofagitator cap. Necessary to hold airbubble under agitator.Replaces 96568

358430 Agitator Cap SealRubber washer used to seal top ofagitator cap. Necessary to hold airbubble under agitator.Replaces 358430

20053407 (19138)Motor Mounting GrommetRubber grommet used to isolate noisefrom motor vibration in belt drivewashers.Replaces 19138 and 20053407

279347Lid Switch & Actuator PackageLid switch and actuator used on manyautomatic models. Also used on dryers.Replaces 279347 and LP210

123931Spanner Nut ToolUsed to remove and replace spanner nutat top of outer tub. Can also be used onMaytag washers.Replaces 12393, 12393-1, 38313 andTB123

14510RCenterpost Bearing Tool(Extra Strong Barbs)

Used to remove and replace bearings incenterpost substructure.

14857RDrive Tube Bearing ToolUsed to remove and replace sleevebearings in spin tubes.

363633 (20102950)AgitatorStandard belt drive agitator. Three vanesand uses HEX drive block. Replaces363633, 18402, and LP941S

Whirlpool Belt Drive Washers

17

Whirlpool Belt Drive Washers

383929Short basket drive for 18# machinesusing wide belt (95405). ReplacesLP361 and 383929

383931As above 383931 but has a narrowpulley for 96388/352967 V belt.Replaces 383931

285753 (2855140)CouplerReplaces LP337 and285753

3348552Pump Outlet HoseReplaces 3348552

383923Long basket drive with wide pulley for95405 belt Replaces LP360 and383923

383922As above 383923 but has narrowpulley for 96388/352967 V belt.Replaces 383931

Basket Drives

89814Control Magnet PackageComplete with plungers and crosspins Replaces LP247 and 89814

84867Control Magnet OnlyControl Magnet without extrapieces of hardware. ReplacesLP24 and 84867

21366Drive Block NutSpanner nut to hold tub securelyon drive block. Used on belt drivewasher. Replaces 21366 andLP332

96384Drive BlockDrive block to support inner basketon belt drive models. Replaces96384 and LP332

18

285140Motor Drive CouplingHigh quality rubber/plastic motor totransmission coupling. Provides noiseisolation also. Extra reinforcement.Replaces 285140 and LP335

285753Motor Drive CouplingHigh quality rubber/plastic motor totransmission coupling. Provides noiseisolation also. Extra reinforcement.Replaces 285743, 285753, WH17X93,and LP336

285206Agitate CamUsed in direct drive transmission toengage/disengage agitation. Replaces285206

63341Spin PawlUsed in direct drive transmission.Replaces 63341

63343Cam Strike

Used in direct drive transmission.Replaces 63343

285352Drive Shaft Thrust Seal

Used in direct drive transmission toseal oil from drive shaft. (Mounts onside of trans.) Replaces 285352

3349985Top Oil SealUsed to seal main shaft to cover (top)of transmission in direct drivemachines.Replaces 3349985

389231

Transmission Drive ShaftMain shaft for agitator drive. Replaces389231

For Whirlpool Direct Drive Washers

Timer KnobsAll are rubber coated with metal base to replace original plastic knob.

3362624Black with brushed metal center.Replace 3360965, 3362624,and 3387785

3362625Almond with brushed metal center.Replaces 3362625

3364290Black, replaces3364292 and3364290

Timer DialsAll are two piece construction that locks snugly onto timer shaft. All have indicator.

387997Black, for Kenmore. Used with TimerKnobs 3362624 and 3362625

3364291White, replaces3364291

61438Chrome color, replace 61438

61439Black color, replaces 61439

356427Secondary Shaft SealTop shaft seal used where main drive shaftexits top of drive tube and under 91939. Alsoused at base of shaft at top of transmission.Replaces 356427

389244Remanufactured Direct Drive TransmissionCompletely remanufactured. Replaces 389244,3360630, WH37X46, and 3360329

285770Agitator DogsUsed to allow one way movement of agitator indirect drive machines. 4 per package.Replaces 285612 and 285770

285746Agitator Cam/Dogs KitAgitator support and dogs for two pieceagitators. Replaces 285746

3363663 Cam onlyWhite cam only from 285746 kit.

285748Agitator Cam/Dogs KitAgitator support and four dogs for two pieceagitators. Replaces 285748

3363662 Cam onlyWhite cam only from 285748 kit.

285751Agitator Cam/Dogs KitAgitator support and four dogs for two pieceagitators. Used on commercial models.Replaces 285751

3947410 Cam onlyWhite cam only from 285751

19

349462G (279264)Drum Seal PackageDurable front drum seal with adhesive.Replaces 279264, 349462G, and DE735Order 349462 for seal only withoutadhesive.

279280Door Latch PackageDoor catch and strike for many makesand models.Replaces 279280, 279570, and DE902

279347Lid Switch and Actuator PackageLid switch and actuator used on manyautomatic models. Also used on somewashers.Replaces 279347, WE4X814, and LP210

691581Switch ActuatorDoor switch actuator used on manymodels. Also used on washers.Replaces 691581, WE4X815, and LP985

688166LBIdler Roller/ShaftIdler and shaft for all models.Replaces 688166LB and DE406Order 347226 for wheel only.

337407Idler ShaftShaft for idler roller. Used on all models.Replaces 337407 and 20061032

341241Drum Drive BeltFour-ridge drum belt 92" long.Replaces 341241 and 349533

688166 (691366)Idler Assembly (Heavy Duty)Idler roller, ½” shaft, and bracketassembly. Used on all models.Replaces 688166, 691366, WE12X95,DE411, and DE412

339489Drum Roller Shaft Right HandShaft for drum roller.Replaces 339489, WE3X85, WE3X79,and DE686

347364Drum Roller Shaft Left HandShaft for drum roller.Replaces 239480, 339490, 3399506,347364, and DE685

349241Drum Support RollerDrum roller. Used two per machine.Replaces 349241, WE3X82, and DE702

For Whirlpool Dryers

90296Roller Shaft ClipTension clip to retain roller shaft.Replaces 90296

690997Tri-RingUsed two per roller shaft to keep roller inposition on shaft.Replaces 339491, WE2X392, andDE904

WPL1Dryer Update PackageContains the most common partsneeded to repair Whirlpool/Kenmoredryers - two 349241 drum supportroller, one 691366, and one 341241 belt.

348855Lint FilterLint filter with white top. Measures 21"tip to tip. Replaces 348855 and DE524

690634Lint ScreenLint screen with grey handle. Fits undertrap door in cabinet top.Replaces 690634, 339392, and DE522

279173Push To Start SwitchA new version of the standardKenmore and Whirlpool dryers(Instructions Included). Replaces279173, 345775, 346191, 346364,348478, 348771, 660388, 660648,660676, 660936, 685067, 696398,686399, 688500, 688769, 692020,692021, 693169

Rear Drum Seal KitsIncludes Rear Drum Seal and Adhesive

Part Model DrumNo. Capacity Diameter Length Replaces239087 Regular 26 1/4” 82.75” 239087, 337449, DE737279408 Large 25” 78.5” 279408, 347885, DE768279735 Compact/ 279735, 345648

Portable

20

3367910Spray Arm Nozzle/CapUsed to hold down lower spray arm andcouple to center washer arm base.Replaces 303997, 3367910, and DW132

674744Door SpringDoor spring and extension wire. Used twoper machine.Unstretched length Spring 5¼”, Link 5".Replaces 674744 and DW307

675611Door SpringDoor spring and extension wire. Used twoper machine.Unstretched length Spring 4½”, Link 5".Replaces 675611 and DW308

716348Upper Rack RollerUsed 4 per machine and packed 1 perpackage. Replaces 716348 and DW605

For Whirlpool Dishwashers

300105Soap Cup Shaft SealGoes around soap cup catch to sealdoor. Replaces 300105

4162322Lower Rack RollerFits Kitchenaid models. Used 8 perrack. Replaces 4162322

4172010Upper Rack RollerUsed 4 per machine and packed 4 perpackage.Replaces 241951, 4162944, 4172010,and DW606

For Whirlpool Refrigerators

1115373Door Switch

Door switch with NO and NCcircuits. 3/16" terminals andrated 5 amps at 120 volts.Replaces 1115373

End CapsPart Bar EndNo. Color Height Replaces839904 Almond 1½” 839904 and SP6951839904 White 1½” 839904 and SP695839975 White ¾” 839975 and SP696912361 White 1½” 912361912583 Almond 1½” 9125834318297* 3" tall at back 4318297

3" deep from liner to front2" tall on front edge

tab for bar is 1 5/8” tall.*Pair of end caps for late models.

839904 (1839904)

839975

912361

912583

4318297

2149705Door Switch

Door switch with NC circuit. 3/16"terminals and rated 5 amps at 125volts. Replaces 2149705

4149377Door SwitchDoor switch with NO circuit. 3/16"terminals and rated 11 amps at 120volts. Used as a drawer tilt switch oncompactors and as an interlock switchon many central furnaces.Replaces 4149377

Door Switches

21

For Whirlpool Ranges

423697Door SpringOven door spring unstretched length8 3/4". Fits Canadian Models.Replaces 423697.

310345Switch closes when dooris opened. Hole sizerequired 3/4".Replaces 310345

307458Control KnobDouble ‘D’ shaft shape used oncook top and oven controls.Replaces 307458 and 866098

330190Control KnobDouble ‘D’ shaft used oncook top switches.Replaces 330190

67901HControl KnobLarge diameter half-moonshaft with set screw foruniversal replacement.Replaces 67901H

3196262Plunger is 3/4" long, terminalsare 1/8" rated 0.23 Amps at120V. Replaces 3196262

4450819Door switch with NO andNC circuits. Largeterminals rated 4 Ampsand small terminals ratedat 1 Amp. Replaces4450819

9781581Plunger is 1/2" long,terminals are 3/16",rated 4 Amps at 120V.Replaces 9781581

Door SwitchesSome switches look similar to image shown, with slight variations

9750896Switch closes whendoor is opened. Holesize required 3/4".Replaces 9750896.

Door Spring

422634Door SpringOven door spring. Unstretchedlength 9 3/8". Fits CanadianModels. Replaces 422634

420230Door HingeOven door hinge. Used right orleft. Fits Canadian Models.Replaces 420230

22

213055 (2-2472)INJECTOR HOSEFor MAYTAG automatic model, series 06,08, 10. MACOR No. MC206154.

015494Agitator Stop RingKeeps agitator from floating off.Replaces 015494, 15494, and LP349

For Maytag Washers

202718Motor SpringKit Provides proper tension on drive belts.Replaces 2-2718 and 202718

205000Motor Spring/Glide KitOEM style. Allows motor to move freelyand provide proper tension on drive belts.Replaces 2-5000, 205000, and LP921

200730Top transmission ShaftTop agitator shaft for transmission.Replaces 2-730 and 200730

207153Top Transmission ShaftTop agitator drive shaft for transmission.Replaces 2-7153, and 2007153

0A4298Agitator Shaft SealSeals shaft inside stem seal assembly.Replaces A4298, 0A4298, and LP348

22204012Stem Seal AssemblyStem seal includes spanner nut, stem, bootseal, and shaft seal.Replaces 2-4012, 204012, and LP340.

204013Spin Bearing AssemblyTop quality sleeve and bearing.Replaces 2-4013, 204013, and LP341

123931Spanner Nut ToolUsed to replace and remove spanner nut attop of stem. Can also be used on Whirlpooland Kenmore washers. Replaces 38313,and TB123

352099Washer PumpPump assembly for late model Norge builtwashing machines. Replaces 35-2099 and35-3834

For Maytag Automatic models, series 06, 08, 10, 12

21537MOUNTING STEM SEALReplacement for MAYTAG, helical drivewashers from 1959 to present. Withinner spring, lubricated.

SIPHON BREAKReplacement for MAYTAG current modelwashers. Replaces old style. Sold inseparate parts only.206638K Body w/ clamp216106K Elbow w/ gasket214765 Gasket

Washer Injector Systems

Part No. Decription26680K INJECTOR KIT215234 Hose215235 Tube215233 Seal215447 Sleeve213015 Nozzle213016 Valve22515 Clamp

Part No. Decription24660K INJECTOR KIT213055 Tube213057 Sleeve213016 Valve213015 Nozzle213013 Hose22515 Clamp213015/16K Nozzle & Valve

23

For Maytag Dryers

313541Cloth Drum SealDrum seal made of wool.Replaces 3-13541, 313541, and 33313541

311534Cloth Port SealPort seal made of wool.Replaces 311534, and DE747

306508Drum Slide PackageIncludes pad glide, and no quick install splitrivets to mount to glide. No special toolsrequired. Used 2 per machine.Replaces 36508, 306508, and DE747

312959Drum Drive BeltFive ridge belt 100" long, used on modelswhich have belt surrounding the drum.Replaces LB234, 312959, and 312959,and 312959

303373Drum Support RollerPre-lubricated bearing and soft rubberwheel which makes for quiet operation.High quality Bronze bushing. Replaces33373, 303373, and DE693

312948Roller ShaftQuality steel shaft for smooth operation.Replaces 312948, 312948, and DE687

For Maytag & Norge Dryers

303705Idler Roller For BeltPre-lubricated high quality Bronze bushing.Replaces 33705, 303705, and DE405

MAYT1Dryer Maintenance Package

Contains one 303705, 312959 belt, andtwo 303373 drum rollers.

633054Idler Roller Shaft

Idler wheel shaft for 31" Norge dryers built1970-1981. Has one round end and onehalf moon shaft.Replaces 633054

631170KDrum Slide Package

Right and left side glides (same length) andcushions for 31" Norge Dryers built 1969 -1971. Replaces 631170K

633805KDrum Slide PackageRight and left side glides (same length) andcushions for 31" Norge Dryers built 1971 -1981. Replaces 633803, 633804, 633805,633805K

306436

Door Catch/Strike PackageComplete door catch. Fits many brands.Replaces 530187, 730033, 532364, and306436

531578 (530642)DRYER DRUM ROLLER (rear)Replacement for Norge Gas and Electricdryers since 1988. 31001096Replaces DE692

530665DRYER DRUM ROLLER (front)Replacement for Norge Gas and Electricdryers since 1988. Replaces DE700

LA1007Roller Kit/Front DrumReplacement for Maytag and Norge left frontcylinder support. Replaces DE690 and LA1007

Kit consists of:(1) 530198 – Shaft(2) 257101 – Screws(1) 530665 – Roller(2) 257813 – Spacers(2) 257814 – Washers(2) 257574 – Retaining Ring

LA1008Roller Kit/Rear DrumReplacement for Maytag and Norge rear cylindersupport. Replaces DE696 and LA-1008

Kit consists of:(2) 530197 – Shafts(4) 257101 – Screws(2) 31001096 – Roller(2) 257813 – Spacer(2) 257814 – Washers(2) 257574 – Retaining Ring(individual parts available)

303373K – Full KitREAR DRUM ROLLER KITReplacement for Maytag, 2 used per dryer.Available in complete kit or individual parts.303373 – Roller312948 – Shaft313347 – Wave Washer33001443 – Nut312535 – Fiber Washer4120233 – Snap Ring

24

530197Drum Roller ShaftFor rear rollers on 27" Norge Dryers.Replaces 53-0197

530198Drum Roller ShaftFor rear rollers on 27" Norge Dryers.Replaces 53-0198

For Norge Dryers

900896Shaft and BearingPump shaft and ball bearings for all beltdrive machines.Replaces 9-896, 900896, DW135

For Maytag Dishwashers

For Magic Chef Ranges

901111Door SpringDoor counter balance spring for mostmodels. Should be replaced in pairs.Unstretched length, 5".Replaces 9-1111, 901111, and DW306

1790263Door SpringUsed on most free standing Magic Chef rangesproduced in the 1970’s. Unstretched length, 5 3/4".Replaces 1790-261 and 1790-263

LA1006Front Glide PackageUsed to replace front roller on 27" NorgeDryers. Replaces LA-1006

532272Right Front Drum SlideLong slide for right front measures6 7/8" X 5/8". Replaces 53-2272

532273Right Front Drum SlideLong slide for right front measures5 3/4" X 5/8". Replaces 53-2273

25

133850

Idler RollerPlastic idler for Franklin-producedmodels.Replaces 133850 and F133850

5303161103Idler Roller AssemblyPlastic idler wheel and steel bracket forlaundry center dryers.Replaces F136803 and 53031611

F136803Idler Roller Only

Plastic idler wheel only for laundrylaundry center dryers.Replaces F136803 and 5303161103

5379499000Idler Roller AssemblyPlastic idler wheel and steel bracket forfull size dryers

805683Door SpringUsed for many years on D & Mdishwashers. Unstretched length, 8".Replaces 805683, 5300808971, andDW301

5300809703Door SpringUsed on late model dishwashers.Unstretched length, 4 1/2". Replaces5300809703

807680Safety Float SwitchExtremely light tension to allow properfloat operation.Replaces 5300807680 and 807680

5300808180KTower KitThree piece tower and spray armbearing in one package.Replaces 808180K, and 5300808180(contains 808180, 808179, 808178,and 808175)5300808175 Bearing Only

For D & M Dishwashers

807008 (5300808968)Lower Rack RollerLower rack roller, used 8 per rack.Replaces 807007, 5300809140, andDW601

807007Lower Rack RollerLower rack roller, used 8 per rack.Replaces 807007, 5300809140, andDW602

5300809018Spray Arm BoltHolds lower spray arm and/or centerspray arm on some models.Replaces 809018

808369Door Vent BaffleBaffle used to seal lower side of dooron 24" models.Replaces 808369, 809122,5300809243, DW503

For WCI Dishwashers

3205549 Tower GasketUsed on bottom of tower in lower rack toseal against top of lower spray arm.Replaces 3205549

For Franklin Dryers

5308057415Side Drum RollerReplacement for Frigidaire, FranklinOutside roller – front and rear. Used 2 or4 per machine. Replaces F141778,

5308057416, and DE694

5308057416Center Drum Roller Kit

Replacement for Frigidaire, Franklin.Center Roller, Shaft, Washer and SnapRing. Used 1 per machine. Replaces

F141779, 5308057416, and DE694

5308057417Center Drum Roller ShaftReplacement for Frigidaire, Franklin.Drum roller shaft for center position, onrear of dryer, used 1 per machine.

Replaces 5308057417 and DE699

26

732081220Door Hinge PinOven door pivot pin.Replaces 73208-1220Fits Canadian Models

721D932A74 (5303281153)Shaft & Bearing KitSupports rear of drum. ReplacesQ142850, 5303281153, 721D932A74,and DE724

5303281008Bearing For ShaftSupports rear of drum. ReplacesQ143951, 844C950H01, and DE727

Q142872 (5303212849)Idler AssemblyThis design uses a plastic hub and bronzeimpregnated bearing to allow for cool andquiet operation.Replaces Q128472, 5303212849, DE410

5300137504 (WE18X26)Lint ScreenLint filter with heavy duty metal frame usedon large and regular capacity Westinghousedryers. Replaces WE18X26, Q137504,5300137504 and DE520

5303937139Drum Glides/Top Front SealUsed on Frigidaire, and Westinghousedryers to hold up front of drum.Replaces 5303937139, Q142887, andothers

5303281049Lower Front SealUsed on Frigidaire, and Westinghousedryers to seal lower 2/3 of drum.Replaces 5303281049, and others

For Westinghouse Dryers

For WCI Washers

77283Shield For ShaftSeals top of shaft and spin tubefrom water. Replaces 77283

Q9303Shaft SealUsed on front load washer, used2 per washer in front of bearing atrear drum. Replace Q9303 and5308015092

For Frigidaire Ranges

137466Tub GrommetUsed on top load washers, mustbe sealed in place withadhesive. Replaces F137466,F71277 and 5303912530

3204422Belt IdlerUsed on top load washers.Takes up slack in slipping-belt.Replaces plastic bracket type.Replaces 3204422

2114909010Door Spring & HingeRed oven door spring and hinge.Replaces 211490-9010

2114909020

Door Spring & HingeRed oven door spring and hinge.Replaces 211490-9020

2114909030Door Spring & HingeOven door spring and hinge 24".Replaces 211490-9030

2012171010Door Spring-Red

Oven door spring. Unstretched length 7 1/2".Replaces 201217-1010Fits Canadian Models

2012171020Door Spring-24"

Oven door spring. Unstretched length 7 1/2".Replaces 201217-1020Fits Canadian Models

2035021010Door Spring-BlueOven Door spring. Unstretched length 8 1/2”.Replaces 203502-1010Fits Canadian Models

2024711010Bushing For HingePin Oven door pivot bushing.Replaces 20274-1010Fits Canadian Models

27

1167943 (5301167943)WHEEL and TIRE ASSEMBLYWheel, tire and nylon bushing for gasand electric, 24”, 28” WCI dryers, i.e.FRIGIDAIRE, GIBSON, KELVINATOR.

1167945 (5301167945)WHEEL and TIRE, 5PC PACKAGE

8057415 (5308057415)SIDE DRUM ROLLERReplacement for Frigidaire, FranklinOutside roller – front and rear. Used 2or 4 per machine. Replaces F141778,

5308057416, and DE694

8057416 (5308057416)CENTER DRUM ROLLER – Kit.Replacement for Frigidaire, Franklin.Center Roller, Shaft, Washer and SnapRing. Used 1 per machine. ReplacesF141779, 5308057416, and DE694

8057417 (5308057417)ROLLER SHAFTReplacement for Frigidaire, Franklin.Drum roller shaft for center position, onrear of dryer, used 1 per machine.Replaces 5308057417 and DE699

8057400ROLLER TIREReplacement Tire for Frigidaire8057415, 8057416, Franklin F141778,F141779. Packaged 10 per bag.

For Frigidaire Dryers

3206162, 3206161Shelf Bar RetainerMeasure 1 7/8” Tall X 1½” tall on front,1" deep less hooks.1½” Tab for bar.White color. Replaces 3206161 rightside and 3206162 left side.

Shelf Bar Retainer3206150 Right Side3206151 Left SideMeasure 1 7/8” Tall X 1¾” Deep.Replaces 3206150 right side and3206151 left side.

Shelf Bar Retainer3206165 Right Side3206166 Left SideMeasure 1¼” Tall X 1" Deep.Replaces 3206165 right side and3206166 left side.

Shelf Bar Retainer5303206644 Right Side5303206645 Left SideAlmond Color. Measure 2 1/8” Tall X1¾” across pins for bar X 1¼ deep.Replaces 5303206644 right side and5303206645 left side.

For Frigidaire Refrigerators

Shelf Bar Retainer5303325990 Right Side5303325991 Left SideWhite Color. Measure 2 1/8” Tall X 1¾”across pins for bar X 1¼ deep.Replaces 5303325990 right side and5303325991 left side.

401951101 (5303325991, 5303325990)

Drain CupEvaporator drain funnel.Replaces 401951-101, WR2M1524, and5300101623

5303301047Shelf SupportUsed in groups of four to support racks inrefrigerator. Has 10 levels and mountswith three screws to cabinet liner.Replaces WR2M1340 and 5303301047

28

For Speed Queen Laundry

51835Blower ShaftMachined steel shaft. Replaces 51835.

51991Blower House BearingOil packed bearing in steel housing.Replaces 51991 and DE745

52079Drum BushingSintered bearing for drum support.Replaces 52079

53001PDrum ShaftMachined steel shaft. Left hand thread.Replaces 53001P

53132Drum ShaftMachined steel shaft. Right hand thread.Replaces 53132.

53519Large Blower ShaftMachined steel shaft.Replaces 53519.

54414Idler PulleyPlastic wheel with oil-packed bearing.Replaces 54414

54415PIdler AssemblyOil packed bearing in plastic wheel.Replaces 54415P

56285Wheel AssemblyOil packed bearing in plastic wheel, rubbertire and steel shaft. Replaces 56285

56461Shaft for Drum RollerSteel shaft with threaded end. Use with62649 roller listed below. Replaces 56461.

62649Drum RollerOil packed bearing in plastic wheel withrubber tire. Use with 56461 shaft above.Replaces 62649 and DE691

23591Grommet for LeverRubber grommet to seal around lever.Replaces 23591

20129TUB BOOTOuter tub to main bearing. Used onSPEED QUEEN automatic through DA, FA.

29

For Commercial Laundry

For Disposals

1010A (9959)For In-Sink Erator333/SS, 77, Classic EmersonE-100, E-120. Sears 6040,6050, 6070, 6072. Ace47983, 47984, 43753.

430019Drum RollerBall bearing support wheel for drum.Replaces 430019

M400947 (00-6008)SPDT Coin-Op SwitchReplaces 00-6008 & M400947

1010B (9963)For In-Sink EratorBadger 1, Badger V, 333. EmersonE-10, E-20, E-30, E-80 Sears 6010,6011, 6012, 6013, 6030. Ace47981, 47982.

8302For In-Sink EratorEmerson, Sears, True Value,Frigidaire, Westinghouse, Roper,Dayton, Wolverine Brass.

Mounting (splash) Guard

30

Igniters

Utilizing a spiral design, SUPCO’s full line of igniters have greater physical strengthand longer life. Including mounting hardware, where necessary, direct replacement oforiginal equipment parts is easy (Including round and flat original parts). Choose theigniter for your application.

• Dryer• Range• Furnace

SDE Series Dryer Igniters• Butterfly Style• For pilotless ignition systems• Used in gas dryers produced since 1968

SUPCO GEM OEM OEMPART NO. PART NO. PART NOS.SDE350 DE350 Norge LA1044, 53-0920, 53-0771,

63- 5010, 63-5877, Z711, 41-982Speed Queen 55438, 41-982Whirlpool 239300, Z711, 41-982GE WE4X444, 41-982Maytag 303376, 41-982Frigidaire 1126982, 5300600831, 41-982

SDE351 DE351 Whirlpool 279311, 41-311, 686590, Z716GEM DE350, DE352Frigidaire 5303281151

SDE358 DE358 GE WE4X739SDE359 DE359 Speed Queen 60868SDE362 DE362 Maytag 304970SDE363 DE363 Whirlpool 279311

Range igniters are offered in round and flat style toaccommodate the maximum number of OEMapplications. The basis for each style utilizes thehigh density silicone carbide for greater physicalstrength. Cross reference information can befound on the next page.

SGR Series Round Range Igniters• Highest density silicone carbide –greater physical strength• Double helix spiral design – requires less current to light• Easy installation – no modifications or adapters necessary

SUPCO GEM IGNITER*PART NO. PART NO. LENGTH

SGR401 GR401 6 ¼"SGR402 GR402 5 ¼"SGR403 GR403 3 ½"SGR404 GR404 3 ½"SGR405 GR405SGR413 GR413SGR423 GR423 3 ½"*Approximate

SGR Series Flat Range Igniters• Superior spiral design• Shock mount design• Direct Replacement for old-style flat design

SUPCO GEM IGNITER*

PART NO. PART NO. LENGTHSGR407 GR407 7 ½"SGR408 GR408 8 29/32"SGR409 GR409 5 17/32"SGR410 GR410 6 7/32"SGR411 GR411 6 9/32"

SGR412 GR412 4 ½"

*Approximate

SDE350

SGR403

SGR Series Range Igniters

SDE Series Dryer Igniters

31

SIG1000

SIG102

SIG1000 Universal Hot Surface IgniterBy utilizing one of the two brackets included, the SIG1000 is designed to replaceover 70 original part numbers.A replacement for Norton, Rober tshaw, Rheem, Carrier and more.• Large bracket used to replace 41-403, 41-407, 41-409• Small bracket used to replace 41-402, 41-405, 41-410• Easy installation• Minimizes inventory

SIG Series Hot Surface Igniters

SIG100 Series Hot Surface Igniters

• Replaces Exact OEM Hot Surface Igniters• Highest density silicone carbide - greater physical strength• Double helix spiral design - requires less current to light• Easy installation - no modifications or adapters necessary

The 1.25" wide bracket replaces the following part numbers.

Robertshaw41-40241-40541-40841-410

American RoadEquipment201W

Armstrong Air38322B001

Comfort Zone150114-04-01

Claire BrothersC-258C-242

Coleman1474-0511474-052

Detroit Radiant201D

DMO Industries20834

Dornback Furnace271W

Enerco Tech10399

Evcon1474-0511474-052

Ilupp Industries

9050

Majestic75-92-10475-92-105

Metzger201N201W

Mor-Flo3200618

Nordyne632-0770632-0880105141000

Norton201D201K201L201R201W271N271P271W

Rheem62-22441-01

Robert Gordon9043660

Superior Fireplace94851

Trane

IGN23IGN34340039PO1B340039PO1B1446676PO1

Vicssman9302-094

Wyue HomeEquipment62821-00162821-002

L. D. White Co.120-07549

White Rodgers767A-357767A-361

Williamson9050

York International025-27774-000025-27776-000025-29043-000025-29050-000Robertshaw41-40341-40741-409

Carrier Corp

SUPCO GEM OEM OEMPART NO. PART NO. PART NOS.SIG100 IG100 Trane Kit3003, IGN21SIG101 IG101 Nordyne 902661, FC007SIG102 IG102 York 025-32626-000, 373-05342-700,

473-12509-001SIG104 IG104 Nordyne 9031100, FC047K

Frigidaire 9031100, FC047KWestinghouse 9031100, FC047KGibson 9031100, FC047K

SIG106 Mor-Flo 3200580American Appliance 271BWeil McLain 511-330-188Robertshaw 41-406

SIG107 IG107SIG108 Rheem SP10972SIG109 Suburban 10098002SIG1000 IG1000 Robert Shaw 41-402 thru 41-410 (except 41-404)

LH33ZS100ALH33ZS002

Ducane20015201

For Norton

201271

Raypak600915

Roberts Gorgon90434300

H.B. Smith500IE

Snyder General13806541380672

1380682

TraneIGN26IGN30B138196PO1B144676PO2

Weil McLain511-330-139511-330-193

The 2.0" wide bracket replaces thefollowing part numbers.

SIG1000 Universal OEM Cross Reference

32

Igniters

SUPCO GEMP/N P/N OEM OEM P/N’S

SUPCO GEMP/N P/N OEM OEM P/N’SSGR401 GR401 Chambers 5301321263, K1301037, K1321263

Crown 519160Frigidaire 5303912584, 5303912586Kelvinator 5301321263, K3211263, K1505149Rapro RPG-301Royal Chef B8935Kenmore K1321263Tappan, 316T004P03, 316T013S01, 316T017P01,O’Keefe& Merritt 316T017P02, 316T017P05, 316T17S01,(all) 355T429S01, 355T429S02, 355T429S03,

5303912586SGR402 GR402 Caloric 42166, 74-06-219

Gaffers & Sattler 10-9220, 359-176, 359-181, 359-202, 359-218,359-244, 359-264

GE/Hotpoint WB22X105Hardwick 01-005003-99Modern Maid 42166, 74-06-170, 74-06-185,74-06-199,

74-06-219Rapro RPG-002

SGR403 GR403 Admiral FR1469Frigidaire 08007988, 5308007988, Q198333GE/Hotpoint WB2K13, WB2X1594, WB2X5195Gibson AP235030, A1505523, A1505786, A1505989Rapro RPG-201Roper (all) 300259, 313584, 321342, 327263, 330689,

4328133, 4331669, 4333355, 4338008,4342528

Kenmore 300259, 311846, 319887, 321342, 7954, 9360SGR404 GR404 Athens P235-030

Brown 180-2A190Frigidaire 5304401265Peerless 1469Rapro RPG-001

SGR405 GR405 Caloric 0309151, 68013, 68014, 68015, 70957, 86689,86690, 89333

Rapro RPG-101, RPG-102SGR413 GR413 Caloric 68016SGR423 GR423 GE/Hotpoint WB2X9154SGR407 GR407 Admiral 1482-224

Chambers C305045BFrigidaire 5303912567, 5303935068GE/Hotpoint WB2X4827Harpco 54099H07Maycor 1482-224, 743P025-60, 7432P052-60Norton/ Eaton IGN-1, IGN-7Robertshaw 41-207Roper 336650Tappan/ 316T023P03, 316T023P07, 316T023P12,O’Keefe & Merritt 316T023S01Whirlpool 4163781

SGR408 GR408 Amana 0309159Caloric 87699, 33-68043-040Harpco 54099H06Norton/Eaton IGN-6Rober tshaw 41-206Roper 786924

SGR409 GR409 Athens P205-014, P205-035Caloric 309151Frigidaire 5303935067GE/Hotpoint WB2X4221, WB2X4306, WB2X4309Gibson 5303935067, AP205014Harpco 54099H02Maycor 551207, 7432P026-60, 7432P051-60KNorton/Eaton IGN-2Rober tshaw 41-202Roper 311618Kenmore 10220Tappan/ 316T023P01, 316T023P04, 316T023P05,O’Keefe & Merritt 316T023P08, 316T023P10

SGR410 GR410 Frigidaire 5303200508, 5308011454, 8011454,5303935067

GE/Hotpoint WB2X4385Harpco 54099H03Maycor 1482-225, E205-918MNorton/Eaton IGN-3Rober tshaw 41-203Tappan/ 316T023P02, 316T023P06O’Keefe & MerrittWhirlpool 4371216

SGR411 GR411 Brown 180-2AA251Frigidaire 5303131300, 5308067970, 8009420, 8013883Gibson AP203014Harpco 54099H04Hardwick 01-005-041-99Maycor 359-199, 550346, 550735, 7432P032-60,

7432P036-60, 7432P067-60Norton/Eaton IGN-4Rober tshaw 41-204Kenmore 10222

SGR412 GR412 Athens P205-013, P205-016, P205-017Brown 180-2A216Frigidaire 5303207520, 5303207522GE/Hotpoint WB2X4528, WB2X4600, WB2X10016Gibson 5303935066, AP205013, AP205016Gray & Dudley 88177Harpco 54099H05Maycor 7432P062-60, 12400035Norton/Eaton IGN-5, IGN-8Rober tshaw 41-205Tappan/ 316T023P11, 316T031P01, 316T031P02,O’Keefe & Merritt 316T031P03

Fact: SUPCO’s Igniters are made from high density silicon carbide. They are fragile and must be treated with care during installation.

Fiction: Handling and igniter with bare hands will cause premature failure.

Fact: Premature failure of an igniter can be caused by excess vibration, incorrect voltage or improper installation.

Fiction: Round igniter designs cannot be used to replace flat igniters.

Fact: By using proper mounting hardware, a round igniter can be used in place of an original flat igniter.

Fiction: If the replacement igniter looks the same as the original, it will work in the application.

Fact: Igniters differ in their ability to handle current (amps) and each is designed for a specific OEM application. Consult the cross referenceinformation in this product sheet to identify the correct replacement.

Fiction: Testing for a good igniter is done by measuring its Resistance (Ohms).

Fact: The test of an igniter is done by measuring the current draw (amps) of the ignition circuit.

Fiction: A visual inspection of an igniter will identify whether it is operable.

Fact: Hairline cracks cannot be seen, and will cause improper operation of the igniter. It is recommended to use a current (amp) test.

Ignitor Facts and Fiction

OEM Cross Reference for Range Igniters

33

BENEFITS

• Easy Installation at Disconnect or Panel• Weatherproof Housing• Indicator Light on some models for Surge Protection Present• Promote Additional Profits• Reduce Callbacks• Keep Equipment Running

LIGHTNING is the most obvious source of a power surge, but notthe only culprit. Utility Events, Cycling of Air Conditioners,Generators, and Motors can also produce damaging surges.Protect your equipment with SUPCO’s Surge Arrestors. With a fullproduct line, we can protect all of your equipment.

Surge Protection

SCMPLUS

SCM1, SCM & SCMPLUS Surge Arrestors

SURGE PROTECTION FOR:• Air Conditioners • Refrigeration Systems • Electromechanical Equipment & Devices• Furnaces • Air Handlers • Heat Pumps• Motors • Pumps

SPECIFICATIONSSCM1 SCM SCM PLUS

Service Voltage 120/240 Volt, Single Phase 120/240 Volt, Single Phase 120/240 Volt, Single PhaseMax. Surge Current 26,000 Amps 50,000 Amps 100,000 AmpsMax. Energy Dissipation 320 Joules 420 Joules 840 JoulesAC Protection Modes L–L, L-G L–L, L-G L-L, L-GResponse Time < 5ns Installed < 5ns Installed <5ns Installed

<1ns Component Level <1ns Component Level <1ns Component LevelOperating Frequency 0 – 400 Hz. 0 – 400 Hz. 0 – 400 Hz.Diagnostics N/A N/A Indicator light –

Surge Suppression PresentClass Secondary Surge Arrestor, Secondary Surge Arrestor, Secondary Surge Arrestor,

Cat C Cat C Cat CInstallation Point Electrical Panel, Electrical Panel, Electrical Panel,

Electrical Disconnect Electrical Disconnect Electrical DisconnectConnection Method Hardwired parallel Hardwired parallel Hardwired parallelAgency Approvals UL, cUL, ANSI/IEEE C62.11 UL, cUL, ANSI/IEEE C62.11 UL, cUL, ANSI/IEEE C62.11Housing High Impact Plastic High Impact Plastic High Impact PlasticHousing Size 2 in. x 2 in. 3 in. x 2.25 in. x.75 in. 3 in. x 2.25 in. x.75 in.Weight 1.0 lbs 0.6 lbs 0.6 lbsWarranty Limited Lifetime Limited Lifetime Limited Lifetime

SCM1 SCM

HVAC Installation Points

34

SPECIFICATIONSDTK-208-3CM DTK-240-3CM DTK-480-3CM

Service Voltage 120/240 Volt, Single Phase 250VAC 3 phase 480VAC 3 phaseMax. Surge Current 50,000 Amps 50,000 Amps 50,000 AmpsContinuous Current Unlimited Unlimited UnlimitedMax. Energy Dissipation 320 Joules 660 Joules 1740 JoulesMCOV 130VAC (L-G) 260 VAC (L-L) 250VAC (L-G) 510VAC (L-G)AC Protection Modes L–L, L-G L–L, L-G L-L, L-GResponse Time < 5ns Installed, < 5ns Installed, < 5ns Installed,

<1ns Component Level <1ns Component Level <1ns Component LevelOperating Frequency 0 – 400 Hz. 0-400 Hz 0-400 HzClass Secondary Surge Arrestor, Secondary Surge Arrestor, Secondary Surge Arrestor,

Cat C Cat C Cat CInstallation Point Meter base, main panel, Meter base, main panel, Meter base, main panel,

disconnect or weatherhead disconnect or weatherhead disconnect or weatherheadConnection Method Hardwired parallel Hardwired parallel Hardwired parallelAgency Approvals UL-OWHX, cUL, UL-OWHX, cUL, UL-OWHX,cUL,

ANSI/IEEE C62.11 ANSI/IEEE C62.11 ANSI/IEEE C.62.11Housing High Impact Plastic High Impact Plastic High Impact PlasticHousing Size 2 in. x 2 in. 3 in. x 2.25 in. x.75 in. 3 in. x 2.25 in. x.75 in.Weight 1.0 lbs 0.61 lbs 0.61 lbsWarranty Limited Lifetime Limited Lifetime Limited Lifetime

DTK-208-3CM

DTK-208, DTK-240, & 480-3CM 3 Phase Surge Arrestors

• 208, 240, 480 volt three phase• 50,000 amp surge current, per phase• Limited lifetime warranty

DTK-LVLP Series

Low Voltage Applications• Available in 1, 2, 3, and 4 pairs• UL497B listed and UL497A models available• Specify desired clamping voltage; 7, 15, 27, 52, 75, 95, 130• Hardwire Series Connection

*Any other DTK Surge Arrestor

Available by Special Order.

AIR CONDITIONING & HEAT PUMP SURGE PROTECTION APPLICATIONSEquipment Size Transient Potential Part No.

Up to 5 Tons Low to Moderate SCMPLUS(Degrading arc fault Potential) DTK-3CM Series

5 Tons to 10 Tons Moderate DTK-120/240-SA(Degrading/ Disruptive arc fault Potential) DTK-3CM Series

10 Tons to 15 Tons High DTG Series*(Disruptive arc fault Potential) (Choose appropriate voltage configuration)

15 Tons to 20 Tons High DTGX Series*(Disruptive/ Destructive arc fault Potential) (Choose appropriate voltage configuration)

Above 20 Tons Very High DTGXL Series*

(Destructive arc fault Potential) (Choose appropriate voltage configuration)

* Note: These items are special order. Please call SUPCO for more information (800) 333-9125

*Note: these units are onlyexamples of the manyapplications. Voltages may varybetween different manufactur-ers. Please call SUPCOTechnical Support Representa-tive for specific applications.

Model # of wires protected 130 VRMS 95 VRMS 75 VRMS 52 VRMS 27 VRMS 15 VRMS 7 VRMSDTK-1LVLP 2 wires RUV SGR SPK OPX LV X DDTK-2LVLP 4 wires RUV SGR SPK OPX LV X DDTK-3LVLP 6 wires RUV SGR SPK OPX LV X DDTK-4LVLP 8 wires RUV SGR SPK OPX LV X DExample: DTK-1LVLP-SCP*-LV (30V DC, 2 wire) *Note: SCP adds over current protection.

HVAC/R Low Voltage Controls ProtectionResidential Applications

DTK-1LVLP-LV (24v AC) Load side of 24v AC transformer

DTK-1LVLP-D (5v DC) thermostat lines, controls, sensors

Commercial Applications

DTK-1-4 LVLP-SCP-RUV Telephone lines at master/control

(130v DC) Communications Panel

DTK-1-4 LVLP-LV 4-20 milliamp loop circuits for monitoring pressure,

(24v AC/DC) (SCP available) humidity, air quality, air flow...

DTK-1-4 LVLP-D (7v DC) Communication circuits, RS485 Networks, temperature,

air and liquid monitoring controls

Surge Protection

35

SPECIFICATIONSDTK-120HW DTK-120/240SA DTK120S15A DTK-WH5

Service Voltage 110/125 VAC 120/240 VAC 120 VAC N/AMax. Surge Current 22,500 Amps 200,000 Amps 39,000 Amps N/AContinuous Current Unlimited (Parallel Installation) Unlimited 15 Amps N/AMax. Energy Dissipation 190 Joules 2640 Joules 480 Joules N/AMCOV 130 VRMS/185VPK 250VAC L-N, 500VAC L-L 130 VRMS/185 VPK N/AAC Protection Modes L-N, L-G, N-G L-G, L-L L-N, L-G, N-G N/AResponse Time < 5ns Installed, < 5ns < 5ns N/A

<1ns Component LevelOperating Frequency 50/60 Hz 0-400 Hz 50/60 Hz N/ADiagnostics Indicator Light Indicator lights for suppression Indicator light, N/A

& available ground loss of groundEMI/RFI Noise Filtering Yes up to 50db 100KHz-100MHz Yes N/ASuppressed Voltage 600V N/A 400V N/AOperating Temperature -40°F to +185°F -40°F to +185°F -40°F to +185°F N/A

(-40°C to +85°C) (-40°C to +85°C) (-40°C to +85°C)Operating Environment Outdoor Use; Out of direct N/A N/A N/A

weather (5%-100% non-condensing)MTBF 6,000,000 Hours; N/A N/A N/A

MIL - 217H/Bellcore methodClass AC Hard-Wired Transient Secondary Surge Arrestor AC Hard-Wired inline AC Hard-Wired Transient

Voltage Surge Suppressor Class C transient voltage surge suppressor Voltage Surge SuppressorInstallation Point Single Circuit Meter base, main panel, Single circuit, Electrical panel,

disconnect or weatherhead enclosure or control panel electrical disconnectConnection Method Hardwired parallel Hardwired parallel Hardwire series connection, Hardwire

Terminal BlockAgency Approvals UL, cUL 1449, UL OWHX, cUL N/A N/A

IEEE C62.41B ANSI/IEEE C62.11Housing High Impact Plastic NEMA 4/4X Flame Retardent ABS N/AHousing Size 5.25” X 5.25” X 2.25” 5.5” X 3.3” X 2.1” N/AWeight 0.18 lbs 1.45 lbs 0.55lbs 1.7 lbsWarranty Limited Lifetime Limited Lifetime Limited Lifetime Limited Lifetime

*Any other DTK Surge Arrestor Available by Special Order.

DTK-HW SERIES Single Circuit Surge Protector

• Available for 120 volt, 240 volt and 120/240 volt application• Use Indoors or outdoors to protect fire/security systems, gate motors, lab equipment, PLCs, etc.• Diagnostic LED shows unit function, ground present, and power on

DTK-120HW Hardwire 120 Volt• LED indicates ground presence and function• UL1449 - Dedicated AC circuit• Ideal for Fire Alarm and PBX applications

DTK-120/240SA Heavy Duty 120/240 Volt Secondary Arrestor• Designed for meter base or panel installation• Excellent RFI/EMI filtering• Unique “ground quality” diagnostic circuit

DTK-120S15A120 Volt Critical Load Surge Protector• Series/Hybrid circuit design guarantees maximum performance• User replaceable fusing means less downtime• “The Best” for PLCs, automation, controls and OEM applications• Features: Fused Protection: In-line replaceable fuse (15a slow blow) Technology: Multistage hybrid, MOV

DTK-WH5 Whole House Kit• Complete residential package with AC power, coaxial and 2 telephone line protection• Most comprehensive and cost effective home/home office protection on the market• Full diagnostics on main AC panel unit• This kit includes a DTK120/240HD Series II, DTK-2LVLPSCP-RUV and a DTK-VSP-A

Surge Protection

36

APP115/APP230All Purpose Protectors

BENEFITS

• Helps prevent blown fuses• Short cycle protection• Prevents operation in low voltage conditions• Prevents false starting attempts• Easy installation• LED to indicate proper operation• Automatically restarts

Helps protect refrigerators, windowair conditioners, dehumidifiers and other appliances fromdamage due to power interruptions. (Brown-outs)

SCMPLUG

Providing the same protection of the SCM (page 35) in a convenient,single outlet plug. Plug the SCMPLUG into an outlet, then plug yoursensitive equipment into the SCMPLUG for surge protection!

SPECIFICATIONS

Specifications APP115 APP230Minimum Starting Volts 90 VAC single phase 180 VAC single phaseOperating Volts 115 VAC single phase 230 VAC single phaseMaximum Switching 1.0 HP @ 115 VAC 1.5 HP @ 230 VAC

1200 BTUGeneral SpecificationsTime Delay 4 minutes +/-1 minute 4 minutes +/-1 minutePower consumption 10 mA 10 mAOperating Temperature 14°F to 158°F 14°F to 158°F

(-10°C to +70°C) (-10°C to +70°C)Size 9.055” X 4.72” X 3.15” 9.055” X 4.72” X 3.15”

(230mm X 120mm X 80mm) (230mm X 120mm X 80mm)

Surge Protection

Low Voltage Protection

37

A complete line of Control transformersdesigned for HVAC/R applications.• Foot or Multi-mount• Output from 20 – 100 VA• A multitude of Primary and Secondary combinations• UL approved• Circuit breakers and fuses where noted

SPECIFICATIONS

Foot Mount TransformersPart Number Primary V Secondary V Output VA Breaker/Fuse Mount TypeSXT101 120/208/240 2.5/12/24 40 Fuse FootSXT103 277 24 40 No FootSXT104 208/240 24 40 No FootSXT105 120/208/240 24 40 No FootSXT114 120/208/240 24 20 No FootSXT115 120/208/240 24 40 No FootSXT116 120 24 40 No FootSXT160 208/240 24 60 Fuse FootSXT79R 120/208/240/480 24 75 Breaker FootSXT100R 120/208/240/480 24 100 Breaker FootSXT175 120/208/240 24 75 Fuse Foot

Multi-Mount TransformersPart Number Primary V Secondary V Output VA Breaker/Fuse Mount TypeSXT106 120/208/240 24 40 No MultiSXT111 120/208/240 2.5/12/24 40 Fuse MultiSXT112 120 24 40 No MultiSXT113 208/240 24 40 No MultiSXT148 120/208/240 2.5/12/24 48 No MultiSXT150 120/208/240 24 50 Fuse Multi

Control Transformers

Foot MountSupco Jard Mars UEI White-Rodgers HoneywellPart Number Part Number Part Number Part Number Part Number Part NumberSXT101 4032F 50355 UET101 N/A N/ASXT103 N/A N/A N/A N/A N/ASXT104 4021F 50353 N/A 90-T40F2 AT40A1139, AT40B1032SXT105 4031F 50354 UET105 90-T40F3 AT40A1121, AT40A1139, AT40B1214SXT114 2031F 50351 UET114 N/A AT20A1123SXT115 4031F 50354 UET115 90-T40F3 AT40A1121, AT40A1139, AT40B1214SXT116 4011F 50352 N/A 90-T40F1 AT40A1121, AT40B1206SXT160 6021F 50316 UET160 N/A N/ASXT79R 7541C 50321 UET79R 90-T75C3 AT88A1005, AT88A1021, AT88A1047SXT100R 10041C 50341 UET100R N/A N/ASXT175 7541M 50320 UET175 90-T75C3 AT88A1005, AT88A1021, AT88A1047

Multi-MountSupco Jard Mars UEI White-Rodgers HoneywellPart Number Part Number Part Number Part Number Part Number Part NumberSXT106 4031M 50304 N/A 90-T40M3 AT40A1018, AT72D1683, AT72D1691, AT140A1018SXT111 5032M 50333 UET111 N/A N/ASXT112 4011M 50302 UET112 90-T40M1 AT72D1683, AT140A1000SXT113 4021M 50303 UET113 90-T40M2 AT72D1691, AT140A1026SXT148 5032M 50333 N/A N/A N/ASXT150 5031M 50314 UET150 90-T50M3 AT87A1106, AT87A1007,

AT87A1049, AT87A1056, AT150A1007

SXT111 SXT105

Cross Reference

38

High precision control at economical prices…• Low Pressure, High Pressure, High Pressure Manual Reset

and Fan Cycling• Tamper Proof• Automatic Reset and Manual Reset Versions• ¼” Female SAE Mounting• Rated 24V, 125VA/110V, 375VA/240V, 375VA• 18” Leads

Pressure Switches

Low Pressure Control, Automatic Reset, Open on Pressure FallSUPCO Klixon Mars A-1 Ranco Robertshaw Tecumseh Johnson Ctrl Open / PSI Close PSISLP0520 PS80-K2-F0305-020-005 33329 PS-LP05-20 MPL-7001 3101-001 N/A P100AC-1 5 20SLP1025 PS80-K2-F0307-025-005 33330 PS-LP10-25 MPL-7011 3100-050 N/A N/A 10 25SLP2550 PS80-K2-F0316-050-005 33362 PS-LP25-50 N/A N/A N/A N/A 25 50SLP2580 PS80-K2-F0325-080-005 33363 PS-LP25-80 MPL-7003 3101-003 N/A N/A 25 80SLP4080 PS80-K2-F0326-080-005 33364 PS-LP40-80 MPL-7004 3101-005 N/A N/A 40 80SLP2565 PS80-K2-F0323-065-005 33336 N/A N/A N/A N/A N/A 25 65

High Pressure Control, Automatic Reset, Open on Pressure RiseSUPCO Klixon Mars A-1 Ranco Robertshaw Tecumseh Johnson Ctrl Open PSI Close PSISHP200150 PS80-K1-0334-200-150 33353 PS-HP200-150 N/A N/A N/A N/A 200 150SHP250150 PS80-K1-0336-250-150 33354 PS-HP250-150 N/A N/A N/A N/A 250 150SHP300200 PS80-K1-0341-300-200 33355 PS-HP300-200 MPH-7103 N/A N/A N/A 300 200SHP350250 PS80-K1-0348-350-250 33356 PS-HP350-250 N/A 3101-201 N/A N/A 350 250SHP400200 PS80-K1-0357-400-200 33357 PS-HP400-200 N/A N/A N/A N/A 400 200SHP400300 PS80-K1-0359-400-300 33358 PS-HP400-300 MPH-7107 3101-202 84076-2/82-2 P100CA-1 400 300SHP450250 PS80-K1-0363-450-250 33359 PS-HP450-250 N/A N/A N/A N/A 450 250SHP400280 PS80-K1-0358-400-280 33322 N/A N/A N/A N/A N/A 400 280

High Pressure Control, Manual Reset, Open on Pressure Rise

SUPCO Klixon Mars A-1 Ranco Robertshaw Tecumseh Johnson Ctrl Open PSI

SMR410 29PSL012-24 33365 PSMF-HP410 N/A 3101-301 N/A P100DA-1 410SMR440 N/A N/A N/A N/A N/A N/A 440

Fan Cycling LP

SUPCO Klixon Mars A-1 Ranco Robertshaw Tecumseh Johnson Ctrl Open PSI Close PSI

SFC125265 20PS116KA264G126G 33340 N/A N/A N/A N/A N/A 125 265SFC150225 N/A N/A N/A MPF7008 N/A P100AP3C 150 225SFC170250 N/A N/A N/A N/A N/A P100AP4C 170 250SFC210275 20PS107KA275K210K 33341 N/A MPF-7009 N/A 84077-4 N/A 210 275

39

Thermostats

Rollout Switches

Features/Benefits• Auto and Manual Reset• Offered in a broad temperature range to cover most heating applications

Applications• Automatic or Manual Rollout safety in gas fired furnaces, unit heater and roof top units.

Automatic Reset Rollout SwitchesSUPCO P/N Gem P/N Cut In Temp Cut Out TempSLS85 LS85 85°F 70°FSLS140 LS140 140°F 100°FSLS145 LS145 145°F 105°FSLS150 LS150 150°F 110°FSLS155 LS155 155°F 115°FSLS160 LS160 160°F 120°FSLS165 LS165 165°F 125°FSLS170 LS170 170°F 130°FSLS175 LS175 175°F 135°FSLS180 LS180 180°F 140°FSLS200 LS200 200°F 160°F

Manual Reset Rollout SwitchesSUPCO P/N Gem P/N OEM P/N Cut In Temp Cut Out TempSRL130 RL130 Universal 47-22453-01 Manual 130°FSRL135 RL135 Universal 47-22453-02 Manual 135°FSRL220 RL220 Nordyne 626354 Manual 220°FSRL230 RL230 Nordyne 626353 Manual 230°FSRL240 RL240 Nordyne 626355 Manual 240°FSRL250 RL250 Nordyne 626352 Manual 250°FSRL260 RL260 Nordyne 626350 Manual 260°F

Gas Furnace Limits and Plenum Thermostats

• Direct OEM Replacements• Economical• UL and CSA approved

Plenum Thermostats

SUPCO P/N Gem P/N Open Close Board Width Board Height Board Length

SHL505 HL505 140°F, 60°C 100°F, 38°C 1.88” 2.8” 1.87”SHL506 HL506 170°F, 77°C 130°F, 54°C 1.88” 2.8” 1.87”SHL507 HL507 140°F, 60°C 110°F, 43°C 1.88” 2.8” 3.12”SHL508 HL508 190°F, 88°C 170°F, 77°C 1.88” 2.8” 3.12”SHL509 HL509 240°F, 116°C 210°F, 99°C 1.88” 2.8” 3.12”SHL510 HL510 150°F, 66°C 130°F, 54°C 1.625” 1.44” 3.12”SHL511 HL511 160°F, 71°C 140°F, 60°C 1.625” 1.44” 3.12”SHL512 HL512 170°F, 77°C 150°F, 66°C 1.625” 1.44” 3.12”SHL513 HL513 170°F, 77°C 130°F, 54°C 1.88” 2.94” 3.12”SHL514 HL514 180°F, 82°C 140°F, 60°C 1.88” 2.94” 3.12”SHL515 HL515 200°F, 93°C 160°F, 71°C 1.88” 2.94” 3.12”SHL516 HL516 210°F, 99°C 170°F, 77°C 1.88” 2.94” 3.12”SHL517 HL517 220°F, 104°C 180°F, 104°C 1.88” 2.94” 3.12”SHL518 HL518 250°F, 121°C 210°F, 99°C 1.88” 2.94” 3.12”SHL519 HL519 155°F, 68°C 125°F, 52°C 1.88” 2.8” 7.12”

Gas Furnace Limits

SUPCO P/N Gem P/N OEM P/N Open Close

SHL501 HL501 Bryant HH12ZA174A 170°F, 77°C 130°F, 54°CCarrier HH12ZA176A, P331-2203

SHL502 HL502 Lennox 26H6501 180°F, 82°C 150°F, 66°CCarrier HH12ZA178AGoodman B1370001

SHL503 HL503 Bryant HH12ZA189 190°F, 88°C 150°F, 66°CCarrier HH12ZA193A, P331-2205

SHL504 HL504 Bryant HH12ZA240 240°F, 116°C 160°F, 71°CCarrier HH12ZA199A, HH12Z252A

40

New Thermostat additions:These thermostats have been added to existing thermostat series. See SupcoProduct Catalog, Edition 18, for more information on the complete series.

Thermostats

SET Series Thermal Fuse

SET405 Includes one (1) high limit gas thermostat (53-1096), one (1) high limit electricthermostat (53-0771) and one thermal fuse (53-1182).

Part No. ReplacesSET405 Maytag LA1053 KitSET406 Frigidaire 5303209182

SHM Series Limit ControlsManual Reset Fire Stat

Part No. Cut-in Cut-outSHM130 Manual 130°F

SL Series ThermostatsDefrost, Icemaker, RangeExact Replacement Type

Part No. Open Close Tube Mount Replaces

SL10010 55°F 25°F 3/8” side GE WR50X10010SL2641 225°F 185°F N/A Amana 62641SL50112 72°F 28°F 3/8” push-on GE WR50X112SL50122 60°F 28°F 3/8” push-on GE WR50X122SL50124 72°F 28°F 0.48” push-on GE WR50X124SL50129 50°F 20°F 3/8” push-on GE WR50X129SL50134 63°F 23°F 0.48” push-on GE WR50X134SL5430 130°F 120°F N/A GE WR49X430SL6155 45°F 18°F 3/8” side Whirlpool 2196155SL7490 48°F 18°F 5/16” push-on Whirlpool 4387490SL7500 72°F 28°F 3/8” side Whirlpool 4387500SL7503 44°F 18°F 5/16” push-on Whirlpool 4387503SL7985 32°F 17°F N/A Whirlpool 627985,

Maytag 95092-1,Amana R0161060

Dryer Thermostats

Part No. Range (°F) Diff. (°F) ReplacesST145 150 30 Maytag 32850ST176 248 80 Lo Bright L53-0771