new professional products for professionals · 2020. 7. 30. · carbon fiber pole / 2,600mm rcp-260...

Professional Productsfor Professionals

EXTRA15vol.

01

360 degree Reflective Target Prism REVO360

DM Pin Pole / 1,500mm (300 × 5) DMP-9MINI 10 032025 CN

DM Pin Pole / 1,500mm (500 × 3) DMP-9 10 101915 CN

75mm Shoe for REVO360 DMP-M675 1 223571 JP

Leica Pole Adapter LSP100R 1 223550 CN

Prism Pole Adapter PPA100R 1 223549 CN

PRODUCT NAME MODEL PKG QTY CODE NO. C/O

360 degree Reflective Target Prism REVO360 R-360 1 223305 JP

100mm

25mm

25mm

Prism PoleSpigot type

Prism Pole5/8 inch type

Pin Pole

Each prism is independent. It meansthose prisms are non-glued. In casethe prism is broken, it is replaceableat a minimum loss.

This structure saves money for usersor renting business companies.(No need to buy new prism)

REVO360 have 6mm screw at thetop and bottom. 6mm screw is usedfor 9mmφ pole, which is widelydistributed.

MUCH-ANTICIPATED 360° PRISMImposing body by shaving off the aluminium block.

SPECIFICATIONSPrism constantPrism heightTargetable angleScrewDimensionsWeight

: -4.4mm (Leica : +30mm): 25mm: H : 360° V : 50°: 6mmφ male: 46(W) × 46(D) × 74(H)mm: approx. 120g

SET CONTENTS• Prism• 75mm shoe for REVO360 (DMP-M675)• Circular level (PC-40L)• Prism protection cover• Case• Manual

Replaceable Prism

Compatible with 9mm Pin Pole

for Prism Pole with 5/8 inch

for Prism Pole with Leica Spigot

OPTIONS

Leica Pole AdapterLSP100RDimensionsWeightScrew (Top)Screw (Bottom)

38 × 30 × 62mm60g6mmφ femaleSpigot

Prism Pole AdapterPPA100RDimensionsWeightScrew (Top)Screw (Bottom)

25φ × 75mm90g6mmφ female5/8 inch female

RELATED PRODUCTS

DM Pin PoleDMP-9500mm × 3

DM Pin PoleDMP-9MINI300mm × 5

PRISMS

FEATURES

DM Pin Pole / 800mm (200mm × 4) DMP-9/20 20 219339 CN

DM Pin Pole / 1,500mm (300mm × 5) DMP-9MINI 10 032025 CN

Carbon Fiber Pole / 2,600mm RCP-260 10 500293 CN

Prism Pole / 2,600mm PP-260 10 500264 CN

Leica Pole Adapter LSP100 1 222281 CN

Shoe for DM Pin Pole DMP-M6 1 219524 JP

Prism Pole Adapter MAG50 1 221851 CN

Wide Angle Reflecting Target ZERO220 PLUS Z-220P 1 222305 JP


Wide Angle Reflecting Target ZERO220 Z-220 1 221646 JP

02

Wide Angle Reflecting Target ZERO220 seriesCREATE A NEW FROM ZEROZERO series are developed based on efficiency.

PRISMS

RELATED PRODUCTS

100mm

OPTIONS

Leica Pole AdapterLSP100DimensionsWeightScrew (Top)Screw (Bottom)

25 × 27 × 122mm67g6mmφ maleSpigot

DM Pin PoleDMP-9MINI300mm × 5

DM Pin PoleDMP-9/20200mm × 4

Aluminium Prism PolePP-2602,600mm

Carbon Fiber PoleRCP-2602,600mm

MODELPrism constantTargetable angleCircular levelDimensionsWeight

Z-2200mmH : 220° V : 30°46′ / 2mm (PC-40L)93 × 82 × 60mm196g

Z-220P0mmH : 220° V : 30°40′ / 2mm (built-in)45 × 65 × 50mm137g

SPECIFICATIONS

SET CONTENTS• Prism• Prism protection cover• Pole adapter (MAG50)• Shoe for DM pin pole (DMP-M6)• Circular level Z-220 : PC-40L Z-220P : Built-in• Hexagonal wrench *Z-220P only• Case• Manual

Z-220PZ-220 with MAG50 + DMP-M6

50mm

Z-220

Z-220P

30mm

25mm

with MAG50

45mm

with MAG50 + DMP-M6

85mm

45mm

View portfor prism height

Replaceable byindependent prisms

for 9mmφ pole

DMP-M6

MAG50+

60mm

50mm

6mmφ male (Top)5/8 inch female (Bottom)

MAG50DMP-M66mmφ female

FEATURES• Prism constant 0mm It prevents from measuring in error.• Replaceable independent prisms Non-glued independent prisms are replaceable at a minimum loss when one of them is broken.• View port For accurate measuring, the prism center height is checkable from back side.• Height adjuatable Easy to adjust the height with slidable structure.

(for Z-220P)


• Prism• Target & Holder set• Offset adapter -30mm• Soft case

• Prism• Target & Holder set• Offset adapter -30mm• Tribrach (MG030G)• Adjustment tools• Hard case

SET CONTENTSKG-2500G KG-2500GP

Offset adapter-30mm

PRISMS

032.5inch Prism / Prism Target Set KG-2500GP 10 222928 CN

2.5inch Prism / Traverse Kit KG-2500G 2 223564 CN

360 degree Prism for Backward Intersection DAXTUSE360 1 223032 JP

360 degree Prism for Backward Intersection

Sliding Staff Prism ALS-P 1 222697 JP

Sliding Staff Prism

2.5inch Prism

DEDICATED TO ALUMINIUM STAFFFor topographic survey in mountainous regions.

FOR BACKWARD INTERSECTIONUseful for field observation.

3 TYPES PRISM CONSTANTKG series has 3 types of prism constant, 0mm / -30mm / -40mm.

SPECIFICATIONSPrism sizePrism constantPrism heightTiltingStaff sizeDimensionsWeight

: 1 inch (25mm): +5mm *¹: -10mm from top of white rubber part: 19° (upper) / 19° (lower) *²: Width 30 ~ 52mm / Depth 10~ 28mm: 83 × 120 × 37mm: 160g

*1 When putting the prism at the lowest available section of the staff.*2 Depends on prism’s angle, prism height will be changed.

FEATURES• An assist when prism staff cannot reflect the light beam because of its angle or by obstacles• Useful for surveying in an area with a large difference in elevation

Prism height

10mm10mm

SPECIFICATIONSPrism constantDimensionsWeight

: 18mm / -18mm *: 36φ × H66mm: 33g

SET CONTENTS• Prism × 3• Insert nut × 3• O-ring × 6

* Depends on the type of total station.

for 32mmφ pipefor 9mmφ pin pole(with insert nut)

Prism height adjustable(with O-ring)

6mmφ bolt for V axis(with insert nut)

SPECIFICATIONSPrism sizePrism constantPrism heightBeam deviationPrism coating

: 2.5 inch (63.5mm): 0mm / -30mm (with adapter) / -40mm: 98.5mm / 180.5 ~ 203.5mm (with height adapter): 5″ - 6″: SilverKG-2500G (Traverse kit)

KG-2500GP (Prism Target set)

Bright field of view(optical plummet) Height adjustable : 23mm

180.5mm 203.5mm





04

PRISMS

Monitoring Prism

Prism Canister / Yellow MG-2504S 1 217910 CN

Prism Canister / Orange MG-2504R 1 219328 CN

Adapter for Leica Spigot SPI-M8 1 222277 CN

Adapter for M10 male screw TTA-M8 1 222343 CN

Survey Wall Point Plug SPP-40 1 222276 CN

1 inch Monitoring Prism / L-bar type / High Visibility TK-10S 1 221437 CN

1 inch Monitoring Prism / L-bar type TK-10 1 219306 CN

1.5 inch Monitoring Prism / Anchor type TT-27 1 218460 JP

1 inch Monitoring Prism / Anchor type TT-17 1 218459 JP

Road Monitoring Prism RMP-S 1 222304 CN

Sticker Prism Sheet / 20mm square TT-S20 - 219389 JP

Sticker Prism Sheet / 30mm square TT-S30 - 219265 JP

Sticker Prism Sheet / 47mm square TT-S - 218458 JP

Monitoring Prism / Sticker type / Magnet base TT-0M 1 221835 JP

Monitoring Prism / Sticker type / Anchor type TT-0 1 218461 JP

Rain Cover for 2.5 inch Prism RC-25 1 222257 JP

2.5 inch Monitoring Base Kit TT-41 1 222256 JP

VARIOUS SHAPES, SIZES, AND QUALITYMyzox provides a range of monitoring prisms.

Road Monitoring Prism

RMP-S

Anchor bolt : L70 x 14mmφ, 59g

TT-17

TK-10 TK-10S High visibility

TT-27

Monitoring Prism / Anchor type

30mm

TT-S16pcs / sheet

TT-S3042pcs / sheet

TT-S2090pcs / sheet

Sticker Prism Sheet

Monitoring Prism / L-bar type

TT-0 TT-0M

Monitoring Prism / Sticker type

with anchor bolt(L70 x 14mmφ)

Magnet mount

SPECIFICATIONS : TT-17Prism sizePrism constantPrism heightBeam deviationWeight

: 1 inch (25mm): -17mm*: 57mm: 5″: 130g

2.5inch Monitoring Base Kit

TT-41

Rain coverRC-25

Prism canisterMG-2504R

OPTIONS

Survey Wall Point Plug & Adapter

SPP-40

40mm

Adapterfor 10mmφ male

Adapterfor Leica Spigot

TTA-M8 SPI-M8

13mm

OPTIONS

SPECIFICATIONS : TT-27Prism sizePrism constantPrism heightBeam deviationWeight

: 1.5 inch (38mm): -27mm*: 60mm: 5″: 200g

MG-2504R MG-2504S

Prism Canister

SPECIFICATIONSPrism sizeBeam deviationPrism coating

: 2.5 inch (63.5mm): 5″ - 6″: Silver

20mm47mm

SPECIFICATIONSPrism sizePrism constantPrism heightBeam deviationWeight

: 1 inch (25mm): -25mm: 60mm: 5″: 207g

MODELScrew (Top)Screw (Bottom)Prism height

SPP-408mmφ femaleAnchor-

TT-M810mmφ female8mmφ male100mm(TT-17)

SPI-M8Spigot8mmφ male100mm(Leica GPR121)

SPECIFICATIONS

Sheet size : 250 × 250mm

SPECIFICATIONS : TT-0Sticker sizePrism constantPrism heightWeight

: 47 × 47mm: 0mm: 60mm*: 120g

SPECIFICATIONS : TT-0MSticker sizePrism constantPrism heightWeight

: 47 × 47mm: 0mm: 75mm: 240g

SPECIFICATIONSPrism sizePrism constantPrism heightBeam deviation

: 2.5 inch (63.5mm): -41mm: 60mm: 5″ - 6″

SET CONTENTS• Base mount• Anchor bolt (L70 × 14mmφ)*Prism canister is not included.

SPECIFICATIONSPrism sizePrism constantPrism angleMaterialDimensions

: 0.7 inch (17mm): -11.3mm: 20°: Aluminium: 100 × 100 × 23mm

*excl. anchor bolt

*excl. anchor bolt

*excl. anchor bolt


LASER SCANNER ACCESSORIES

05

Laser Scanner TargetMOST POPULAR TYPE 6 INCH TARGETConstant at crosspoint 0mm.

Bipod BIP-180 4 217426 CN


Tribrach Adapter with Removable Center TAR 1 240041 CN

Tribrach with Optical Plummet MY011BO 1 240003 CN

Case for Laser Scanner Target M-STC 1 223465 CN

Laser Scanner Target / 1pc ST-6 1 223446 JP

Laser Scanner Target Set / 2 targets ST-6S 1 223467 JP

OPTIONS

for Pole use

for Tripod use

Tribrach with Optical PlummetMY011BOMaterialCircular levelLocking screw

Aluminium8′ / 2mm5/8 inch female

SET CONTENTS (ST-6S)• 6 inch target (ST-6) × 2• Case (M-STC)• Manual

SPECIFICATIONSTarget diameterCrosspoint heightScrew (bottom)Weight (target)Weight (case)

: 6 inch (152.4mm): 215mm: 5/8 inch female: approx. 400g / 1pc: approx. 500g

TAR

*The crosspoint height with tribrach adapter TAR is compatible with Leica P-series.

Easy to set the target at directly opposite to scanner

The target is adjustable at any angles invertical and horizontal. Constant loading to rotation axis can fixthe angle without a fixing screw.The crosspoint is arranged on the thecentral axis line, it brings stable accuracy.

Portability

Able to use with the poles and the tripodswith tribrach by 5/8 inch screw.

Versatility

The case M-STC can store ST-6 × 3pcs,or ST-6 x 2pcs with tribrach & adapter.

Tribrach AdapterTARDimensionsWeightwith removable center with lock

approx. 97 × 79 × 63mmapprox. 565g

*See Page10 for the details.

Carbon Fiber PoleRCP-260

BipodBIP-180+

FEATURES

215mm 250mm


06

LASER SCANNER ACCESSORIES

Scanner Target TT-WB 1 218462 JP

Scanner Target

Tripod for Scanner TRIPEAKS

Tripod Caster DOLLY SC-D1 1 223602 CN

Aluminium Tripod TRIPEAKS SAL343 1 223666 CN

Carbon Fiber Tripod TRIPEAKS SCF343 1 223665 CN

Carbon Fiber Tripod TRIPEAKS SCF444 1 223664 CN

COMPACT TYPE TARGETScanner target.

MADE BY CARBON FIBERLight weight and high mobility.

1 30° (SCF444) / 25° (SCF343 / SAL343)2 55°3 85°

3 STEPS LEG ANGLE BY RELEASE BUCKLE

SPECIFICATIONSTarget sizeCrosspoint heightScrew (bottom)Weight (target)Weight (anchor bolt)Anchor bolt

: 47 × 47mm: 60mm*: M10 male: approx. 120g: approx. 60g: L70mm × 14mmφ

OPTIONSAnchor bolt can be changed to magnet base

SPECIFICATIONS (Option : with magnet base)Magnet forceCrosspoint heightDimensionsWeight

: 200N: 75mm: 98.5 × 67 × 17mm: approx. 240g

Please ask us for the details.

OPTIONS

Tripod Caster DOLLYSC-D1MaterialDistance between wheelsMax. loadDimensionsWeight

Aluminium700 ~ 950mm / 2sec.20kg170 × 190 × 470mm2.7kg

Able to move the tripod aroundwith ease

SET CONTENTS• Tripod• Rubber shoe (installed) × 3• Stainless shoe × 3• Hex wrench × 2• Case• Manual

SCF444 SCF343 SAL343

MODELMaterialFull extended*Full closedMax. loadSectionScrewWeight

SCF444Carbon fiber1,520mm570mm35kg4sec.5/8 inch male3.6kg

SCF343Carbon fiber1,500mm670mm25kg3sec.5/8 inch male2.6kg

SPECIFICATIONSSAL343

Aluminium1,500mm670mm25kg3sec.5/8 inch male3.1kg

*When setting at first angle (30° / 25°)

Carbon fiber Carbon fiber Aluminium

HEAD MOUNT PLATE & FIXING KNOB

Easy to attach a scanner by removable head mount plate. To remove and attach the plate,use the fixing knob (blue part) as spana to tighten and loosen.


*excl. anchor bolt

GNSS ACCESSORIES

07

Clamp Holder for Smart Device

Controller Bracket

1 221878 JP

1 222841 CN

Field Controller Slim Bracket with Compass CRL-SLC 1 223556 CN

Field Controller Bracket with Compass CRL-TPC 1 222344 CN

Field Controller Bracket CRL-TP1 1 222840 CN

Universal Controller Bracket CRL-CLM1 1 222839 CN

UNIVERSAL CONTROLLER CLAMPAdjustable clamp can hold any type of GNSS controllers.

OPTIONS

CRL-CLM1 CRL-TP1

CRL-TPC CRL-SLC

SPECIFICATIONSMODELDevice size Width DepthPole sizeDimensionsWeight

CRL-CLM1Controller / Smartphoneapprox. 67 ~ 110mmup to 55mm28 ~ 33mmφ215 × 110 × 45mmapprox. 340g

CRL-TP17 inch Tabletapprox. 100 ~ 140mmup to 40mm28 ~ 33mmφ235 × 122 × 45mmapprox. 360g

CRL-TPC7 inch Tabletapprox. 100 ~ 140mmup to 40mm28 ~ 33mmφ260 × 122 × 45mmapprox. 400g

CRL-SLC8 inch Tabletapprox. 120 ~ 150mmup to 13mm28 ~ 33mmφ260 × 90 × 45mmapprox. 340g

MODELDevice size Width DepthPole sizeDimensionsWeight

7 grade angle adjustable Width & Depth adjustable

• FC-500 / FC-250• SHC-500• TOUGHBOOK 4.7 inch• TOUGHBOOK 5 inch

DEVICE EXAMPLESCRL-CLM1

• 8 inch tablet• Galaxy Tab Active2

CRL-SLC• TOUGHBOOK 7 inch• Huawei MediaPad T3 7• iPad mini• FC-5000

CRL-TP1 / CRL-TPC

Built-in compass*CRL-TPC & CRL-SLC*CRL-SLC : width only

Adapter for Field Controller BracketCRL-HAP1Adapter for horizontal use

Adapter for DM Pin PoleCOV9for DM Pin Pole (9mmφ) use

Adapter for DM Pin Pole (9mmφ)

Adapter for Field Controller Bracket

COV9

CRL-HAP1

with compass with compass


CRL-CLM1 CRL-TP1 CRL-TPC CRL-SLCX grip TAB-N1 Tablet Holder7 inch

Tablet Holder10 inch Laptop Holder

DepthWidth

~ 55mm ~ 40mm ~ 40mm ~ 13mm~ 22mm FZ-N1 3.3 ~ 25.4mm 3.3 ~ 23.6mm 12.7 ~ 44.5mm67 ~ 110mm 100 ~ 140mm 100 ~ 140mm 120 ~ 150mm45 ~ 114mm FZ-N1 129 ~ 144mm 165 ~ 197mm 254 ~ 406mm

Laptop 10 ~ 16″Tablet 10″Tablet 7 ~ 8″Tablet 7″Tablet 7″ Tablet 8″

Data Collector

Smartphone

Data Collector Data Collector

Tablet 4.7 ~ 5″

Data Collector

Smartphone

FZ-N1

Correspondence TableSmartphone, data collector, tablet and laptop

GNSS ACCESSORIES

Mount Base for Tripod Head Use MB 1 222231 JP

Double Socket Arm with Base (1.5″ ball) RAM-101U-B 1 222230 US

Laptop Holder RAM-234-3 1 222226 US

08Adapter for DM Pin Pole (9mm) COV9 1 221878 JP

Pin Pole Sliding Grip (6mm - 9mm) COV69 1 223379 JP

Holder for Panasonic Toughbook FZ-N1 TAB-N1 1 223350 JP

X grip for Smartphone Laptop Holder

Holder for Panasonic Toughbook FZ-N1DESIGNED EXCLUSIVELY FOR FZ-N1Holding the device and the pole with one hand.

54°

Push to release

*FZ-N1 is not included.

Double Socket ArmRAM-B-201U

*for 1" ball

Mount BaseMB

Double Socket Armwith Bases

RAM-101U-B

*When using this product at the minimum width (45mm), the height needs to be over 140mm.

SPECIFICATIONSPole sizeDimensionsWeight

: 16 ~ 36mmφ: approx. H165 × W83 × D150mm: approx. 330g

Pin Pole Sliding GripCOV69Pole sizeDimensionsLeg length

6 ~ 9mmφH235 × W30 × D44mmapprox. 150mm

Adapter for DM Pin PoleCOV9for DM Pin Pole (9mmφ) use

EASY SET UP & STABLEJust 5 seconds to mount the mobile.

ACCOMMODATE TABLET AND LAPTOPCompatible with TOUGHBOOK with optional tall corner guards.

Pole ClampRAP-B-400U16 ~ 36mmφ

Adapter for DM Pin Pole (9mm) COV9 1 221878 JP

Pole Clamp for Tripod Leg / Pole Use RAP-B-400U 1 222229 US

Double Socket Arm RAM-B-201U 1 222267 US

X grip for Smartphone RAM-HOL-UN10BU 1 222227 US

AdapterCOV9

for DM Pin Pole

SPECIFICATIONSDevice size Width Depth

: Smartphone: approx. 45 ~ 114mm: up to 22mm

• iPhone 11 Pro Max• iPhone Xs Max• iPhone 8 Plus• iPhone 7 Plus• iPhone 6s Plus

DEVICE EXAMPLES SPECIFICATIONSDevice size Height Width Depth

: Laptop / Tablet (10 ~ 16 inch): over 130mm: approx. 254 ~ 406mm: approx. 12.7 ~ 44.5mm

*Attach the Laptop Holder to a tripod leg / pole is not recommended.

Slidable grip

*COV69 is a set of a grip and protect legs. TAB-N1, pin pole and prism are not included.

Protect legsRemovable and angle adjustable

Stepless and smooth angle adjustmentOne-handed attachment and removal

OPTIONS




*1.5" ball

09

Tablet Holder

Duralumin DM Pin Pole

VESA Adapter VESA-ADP 1 223202 JP

Mount Base for Tripod Head Use MB 1 222231 JP

Pole Clamp for Tripod Leg & Pole Use RAP-B-400U 1 222229 US

Round Base RAP-B-202U 1 222268 US

Double Socket Arm with Round Base RAM-B-103U 1 222228 US

Tablet Holder Unit / 7 inch / for Pole Use TAB-7 1 222086 US

Tablet Holder Unit / 10 inch / for Pole Use TAB-10 1 222084 US

Tablet Holder / 7 inch RAM-HOL-TAB12U 1 222225 US

Tablet Holder / 10 inch RAM-HOL-TAB19U 1 222224 US

Attach to a Tripod Leg / Pole

Attach to a Tripod Head

*Mount Base (MB): When using with a surveying tripod, the tripod must be flat head (inner size under 80mmφ), with 5/8 inch locking handle.

GOES WELL WITH Panasonic TOUGHPADDedicated holder for tablets with 7 or 10 inch display. SPECIFICATIONS

MODELDevice size Height Width Depth

RAM-HOL-TAB19U10 inchapprox. 273 ~ 340mmapprox. 165 ~ 197mmapprox. 3.3 ~ 23.6mm

RAM-HOL-TAB12U7 inchapprox. 181 ~ 241mmapprox. 129 ~ 144mmapprox. 3.3 ~ 25.4mm

Mount BaseMB

Mounting hole patternDimensionsWeight

VESA75 (75 × 75mm)90 × 90 × 10mm90g

RAM-HOL-TAB19U

RAM-HOL-TAB12U

Pole ClampRAP-B-400U16 ~ 36mmφ

Round BaseRAP-B-202URAM-B-103U

MB RAM-B-103U RAP-B-202U

Double Socket Armwith Round Base

5/8 inch female90mmφ

・TOUGHPAD

*1 Without an extended battery pack*2 Non-barcode model

　FZ-G1 (10 inch)　FZ-M1 (7 inch)　FZ-L1 (7 inch)

・iPad mini (7 inch)

*3 Without LifeProof case (iPad mini 1-3)

*1

*2

*3DEVICE EXAMPLES

EXAMPLES OF USEOPTIONS

＋

RAM-B-103U RAP-B-400U

SET CONTENTS (Tablet Holder Unit TAB-10 / TAB-7)• Tablet Holder 10 or 7 inch (RAM-HOL-TAB19U / TAB12U)• Double Socket Arm with Round Base (RAM-B-103U)• Pole Clamp (RAP-B-400U)

VESA AdapterVESA-ADP

SPECIFICATIONSMaterialSectionColor intervalPole diameterWeightCase

: Duralumin: 1,000mm × 1sec.: 100mm: 9mmφ: 184g: Aluminium

Alluminiumalloy Duralumin Stainless

HardnessWeight

Duralumin is strong, hard, lightweightalloy of aluminium that contains somecopper.Compared with the standard aluminiumalloy(A5052), duralumin is 1.6 timesharder that the strength is enough touse for DM pin poles.

DURALUMIN

FEATURES• Lighter than a T-shirt ; the weight of duralumin is about one-third of stainless *A T-shirt : approx. 200g

STUPENDOUSLY LIGHT64% lighter than stainless DM pin pole.

Duralumin DM Pin Pole DMP-1000D 1 223349 JP

StainlessDM Pin Pole

× 1

DuraluminDM Pin Pole

× 3

9mmφ

Pole diameter

Hardness60% up

Weight66% down

GNSS ACCESSORIES / POLES



Carbon Fiber Pole Telescopic type / Bipod

10

POLES

DM Pin Pole 6mm dia.

DMP-50 1 101919 CN

DMP-6ADP 1 223450 JP

DMP-6-800A 1 223449 JP

DMP-6-740A 1 223448 JP

Shoe for DM Pin Pole 9mm dia. / 50mm

DM Pin Pole 6mm dia. L23mm Adapter

DM Pin Pole 6mm dia. / 830mm

DM Pin Pole 6mm dia. / 740mm

Able to set at the same prism height withATP1S / ATP1SII / ATP2S / ATP2SII.(at the lowest point)

PRISM HEIGHT 100mm

CONNECT 6mmφ & 9mmφ PIN POLEDedicated to Topcon Sokkia prisms.

DMP-6-740ADMP-6-800A

100mm

100mm

100mm

50mm

50mm

100mm

830mm 740mm / 2sec.

SPECIFICATIONSMODELLengthGrooveWeightMaterialPole diameterAccessories

DMP-6-800A DMP-6-740A830mmat every 100mm195gStainless6mmφCase

740mm (375+365mm)at every 50mm175gStainless6mmφ-

FEATURES• Connect 6mmφ & 9mmφ pin pole with DMP-6ADP• Able to set the prism at high position to work efficiently when working in different height or with obstacles • 2 models selectable - DMP-6-800A : Verticality & Wide slide range - DMP-6-740A : Portability (Storable in Topcon Layout Navigator LN-100 carrying case)

*ATP2S : Topcon Sokkia 360° prism

100mm73mm

ATP2S

AdapterDMP-6ADPM5 female for 6mmφ pin poleM6 female for 9mmφ pin poleLength 23mm

6mmφ

73mm

DMP-6ADP

DMP-50

SPECIFICATIONSMODELFull extendedFull closedScrewWeightGraduationMaterial 2nd sectionPole diameter

RCP-260 RCP-2002,600mm1,480mm5/8 inch male1.20kgMetric (5mm)Carbon fiberAluminium33mmφ

2,000mm1,130mm5/8 inch male1.10kgMetric (5mm)Carbon fiberAluminium32mmφPin lock

Screw lock

33mmφ

28mmφ

32mmφ

25.5mmφ

FOR RTK SURVEYChoice of 2600mm and 2000mm.

SPECIFICATIONSFull extendedFull closedMaterialWeightClamp size

: 1,800mm: 1,064mm: Aluminium: 2.15kg: 21 ~ 38mmφ

RCP-200RCP-260

RTK Pole & Bipod Case RB-C 1 219405 CN

Bipod BIP-180 4 217426 CN



BIP-180

Pole diameter

RB-C can store the carbon fiber poleand the bipod in assembled condition, it is easy to carry around and set upat field.

Length : 1,890mm

RTK Pole & Bipod CaseRB-C

OPTIONS

Built-in circular level 20′ / 2mm

RCP-200RCP-260

Pole diameterRCP-200RCP-260

CONNECTING

+

6mmφ pin pole

+

9mmφ pin pole(Not included)

DMP-6ADP

Myzox pole



ALX-55Y2 10 222442 CN

Aluminium Leveling Staff 3 5 Aluminium Leveling Staff 5 5

Aluminium Leveling Staff 3m / 5sec. ALG-35Y 8 222722 TW

STAFF & ACCESSORIES

11Multi Cushion Case M-MCC 1 222883 CN

Backpack for Stakes Multi Cushion Case

Backpack for Stakes M-PLB 1 222649 JP

IDEAL SIZE FOR ROTATING LASERProtect your valuable instrument.

Sling

Hand

2way

LARGE CAPACITY × WATER RESISTANCERainy day, with a lot of stuff, you-ll be all right with STAKEBAG.

FEATURES• Double russel mesh on the back pad• Waist belt & tough shoulder straps • Big front pocket with water resistant• Two side-pocket inserts prevent tearing• Bottom pad for heavy stakes

SPECIFICATIONSMaterial

Max. loadDimensionsWeight

: Tarpaulin, Polyester, Foamed polyethylene: approx. 10kg: approx. W41 × D24 × H55cm: approx. 1.5kg

Large Capacity : 20 stakesStake size : 45 × 45 × 450mm = 20 stakes

: 70 × 70 × 600mm = 10 stakes

Front pocketwith water resistant

Side pocketswith inserts

SPECIFICATIONSGraduation

SectionFull closedWeight

: Metric YW: Inside: 3m / 5sec.: 845mm: 1.20kg

FrontBack

FEATURES• ALG series : Standard type• Easy storage and transport• Button protection label• Hanging case

COMBINATION OF PORTABILITY & LENGTHFit in the trunk of your car by 5 section structure.

FRONT BACK

Reading pointReading point10mm

5mm3mm2mm

50

Unit : mm

34

26 10GRADUATION

SPECIFICATIONSMaterialDimensions

Weight

: Nylon

: W320 × H220 × D220mm: W360 × H250 × D260mm: 1.3kg

InnerOuter

FEATURES• Light & tough• Removable partition (1pc)• Hard & soft cushions (hard × 1pc, soft × 4pcs)• 2 way• Multi case

Detector with clamp 2 sets storable*There are a few exceptions.

You can place ALG-35Y sideways in car trunk.SUPERIOR PORTABILITY

GOOD BALANCEDGood balanced economical model.

50

Unit : mm

34

26.5

10

SPECIFICATIONSGraduation

SectionFull closedWeight

: Metric YW: 0 UP: 5m / 5sec.: 1,235mm: 1.50kg

FrontBack

FRONT BACK

GRADUATION

10mm5mm

Aluminium Leveling Staff 5m / 5sec.PRODUCT NAME MODEL PKG QTY CODE NO. C/O PRODUCT NAME MODEL PKG QTY CODE NO. C/O

PRODUCT NAME MODEL PKG QTY CODE NO. C/O PRODUCT NAME MODEL PKG QTY CODE NO. C/O

× ×

12

SURVEYING INSTRUMENTS

Automatic Rotating Laser MJ-300 series

Clamp for D-RE2 D-RC 1 221960 DE

Digital Laser Detector D-RE2 1 222830 DE

Digital Laser Detector with Clamp D-RE2/D-RC 1 222829 DE

Automatic Rotating Laser / D-RE2 set MJ-300S 1 221957

Clamp for MJ-RE2 MJ-RC2 1 222948 CN

Detector MJ-RE2 1 222947 CN

Detector with Clamp MJ-RE2/MJ-RC2 1 220158 CN

Automatic Rotating Laser / MJ-RE2 x 2 set MJ-300 1 219853 CNCN / DE

AUTO-LEVELING ROTATING LASERWide-range, 600m, automatic-leveling rotating laser.

SPECIFICATIONSLaser sourceWavelengthLaser classMeasuring rangeAccuracySelf-leveling rangeWater & dust resistancePowerOperating timeTripod threadDimensionsWeight

: Visible red laser diode: 635nm: class 3R: 0.5 ~ 300m (radius): ±15″ (±0.75mm / 10m): ±3.5°: IP54: C alkaline battery × 4: approx. 20 hours: 5/8 inch × 11 threads: approx. 205 × 155 × 205mm: approx. 1,850g (excl. battery)

FEATURES• Wide range usage 600m diameter• Automatic self-leveling ±3.5° when power on • Water and dust resistance IP54• Light and compact body

STANDARD ACCESSORIES• Case • Manual• C alkaline battery × 4• Detector with clamp MJ-300S : D-RE2 / D-RC MJ-300 : MJ-RE2 / MJ-RC × 2 sets• Battery for detector

Select a Detector set from below : D-RE2 or MJ-RE2 × 2

Case Manual(for Laser)

C alkaline batteries x 4 Battery for Detectorfor MJ-RE2 for D-RE2

OR

Digital Laser Detector D-RE2 set Detector MJ-RE2 × 2 setsDIGITAL READOUT WORK EFFICIENTLY WITH 2 DETECTORS

▲▼(allows) shows whether thelaser beam hits higher or lowerthan the center line.

Showing the gap from aimed height,accurate measurements can be madewithout moving the rod clamp.

1010

40

Digital Laser Detector

20.0

+20

SPECIFICATIONSMODELDetective heightNumeric readout heightDetective angleDetective wavelengthResolutionAccuracyWater & dust resistancePowerDimensionsWeight (excl. battery)

D-RE290mm (-30 ~ 60mm)80mm (-25 ~ 55mm)±45°450 ~ 800nm0.5 / 1.0 / 2.0 / 5.0 / 10.0mm-IP67AA alkaline battery × 1135 × 69 × 25mmapprox. 175g

MJ-RE248mm (-24 ~ 24mm)--635nm-±1.0mm / ±2.5mm-9V alkaline battery × 1136 × 65 × 25mmapprox. 170g

FEATURES• 0 set function• 5 grade resolution • Wide detective window

Setting any height as a datum point0 Set Function

Setting available range : 50mmfrom the center line(upper : 10mm / lower : 40mm)

10

40


MEASURING INSTRUMENTS

13

Digital Angle Level DIGILEVEL 250

Digital Asphalt Thermometer

Digital Caliper

Digital Angle Level DGL-250 1 222370 CN

Miniature Connector MCCN 1 223452 TW

Wire Probe SE-WI 1 223451 TW

Surface Probe SE-SU 1 223320 TW

Needle Probe SE-IN 1 223319 TW

Digital Asphalt Thermometer AST10 1 223318 TW

Waterproof Digital Caliper WCP-150 1 222686 CN

Digital Caliper DCP-150 1 220406 CN

COMPACT BODY WITH VISIBLE DISPLAYFor building block walls, plumbing, equipment installation, etc.

READY TO USENeedle probe SE-IN and 9V battery are included in the set.

STANDARD TYPE & WATERPROOF TYPEBoth types have a depth bar.

Bright in the dark and lightwith green LED display

V-groove and Magnetto hold to variety of metal surface

SPECIFICATIONSResolutionReading accuracy

Accuracy

Measuring rangeOperating temp.PowerDimensionsWeight

: 0.05° • 0.08% • 1mm/m: ±0.1°(at 0° & 90°) ±0.2°(at other): H ±0.5mm/m V ±0.75mm/m: 4 × 90° (0 ~ 360°): 0 ~ +40°C: AAA alkaline battery × 2: 254 × 27 × 59mm: approx. 372g (excl. battery)

FEATURES• Compact body 254mm• Water and dust resistance IP54• Automatic digit inversion• Data hold• 0 setting• 0° and 90° beeper function• Low battery indicator• V-groove & magnet on the base• Auto-power off approx. 3minutes• Self-calibration

3 units degree( ° ) / slope(%) / (mm/m)

SPECIFICATIONSDisplaySensor typeMeasuring rangeResolution

Accuracy

PowerDimensionsWeight

: 4 digits display: Type-K Thermocouple: -200 ~ 1,370°C: 0.1°C (at -200 ~ 200°C) 1°C (at 201 ~ 1,370°C): ±(0.5%rdg+1°C) (at 201 ~ 400°C) ±(0.3%rdg+1°C) (at other): 9V battery × 1: 164.1 × 53.7 × 34.3mm: approx. 178.5g (including battery)

SET CONTENTS• Main unit• Needle probe SE-IN• Wire probe SE-WI (1m, -30 ~ 200°C)• 9V battery × 1• Manual

FEATURES• Ideal for measuring asphalt with 200mm probe• MAX / MIN, Relative measurement mode• Data hold

Surface probeSE-SUMeasuring rangeSizeCable length

-20 ~ 400°C15φ × 115mmapprox. 1m

Needle probeSE-INMeasuring rangeSizeCable length

-50 ~ 650°C38φ × 200mmapprox. 1m

200mm

Inside Step DepthOutside

DCP-150

WCP-150

SET CONTENTS• Caliper• Battery• Manual• Case

Green light will be on when measuredvalue is within the specified tolerancerange. (WCP-150)

TOLERANCE SETTING

SPECIFICATIONSMODELMeasuring rangeResolutionAccuracyResponse speedWater & dust resistancePowerDimensionsWeight

DCP-150 WCP-150

• 0 setting• Relative measurement• Tolerance setting

• 0 setting• Data hold

0 ~ 150mm0.01mm±0.03mm1.5m / second-LR44 × 1235 × 77 × 16.2mm156g

0 ~ 150mm0.01mm±0.02mm3.2m / secondIP67CR2032 × 1235 × 76 × 15.4mm160g

OPTIONS




14

DRONE ACCESSORIES

Digital Anemometer DAM-30 1 222323 CN

GNSS Receiver Case M-GPC 2 240725 CN Safety Vest with PR Pocket 5941014 1 222208 CN

Ground Control Point Digital Anemometer

GNSS Receiver Case Safety Vest with PR Pocket

Ground Control Point / White Circle & Black TH400-BWR 1 222171 JP

Ground Control Point / Black & Yellow TH400-BY 1 221817 JP

Ground Control Point / Black & White TH400-BW 1 221816 JP

WITH YOUR ORIGINAL SIGNShow what you are in a A4 size transparent pocket.

SPECIFICATIONSMaterialSizeReflection widthPocket

: Tape PVC / Mesh Nylon: Free (Length 60cm / Waist 90 ~ 124cm): 70mm: H215 × W320mm (A4 size)

By wearing a safety vest, you can notify people that you are in control of a droneand ask them to not disturb you.Reducing the potential for disturbance will allow you as the drone pilot to focuson the task at hand.

SAFETY FIRST

SPECIFICATIONSDimensions

Carrying beltWeight

: Inner approx. 440 × 250 × 180mm Outer approx. 450 × 300 × 235mm: 1,100 ~ 1,650mm: 2.0kg

Rucksack

Hand carry

Sling

EASY TO BRING TO FIELDRemovable partition to get your favorite room

DJI Matrice 600Pro batteries TB47Scan be stored up to 3 sets (18pcs).

FEATURES• Removable partition• 3 ways to carry• Reflective tape

WIND SPEED AND TEMPERATURESimple and lightest model with selected functions.

VISIBLE CLEARLY FROM ABOVEGreatly increase the global accuracy of drone mapping.

SPECIFICATIONSMeasuring rangeResolutionPowerDimensionsWeight

: 1 ~ 30.0m/s, -10 ~ 50°C: 0.1m/s, 0.1°C: AAA battery × 3: W54 × H163 × D30mm: approx. 120g

FEATURES• Beaufort scale & Wind chill• Data hold• MAX & AVERAGE data

Wind speed rises proportionally to the altitude. There is a big gap between windspeed on the ground and in the upper air especially in a built-up area.Drone pilot must pay the most careful attention to the wind.

Max Wind Speed Resistance

StandardMAVIC 2MATRICE 300RTK

: up to 5m/s: up to 10m/s: up to 15m/s

SPECIFICATIONSDimensionsHolesMaterialWeightQuantity

: 395 × 395 × 1mm: 100mm dia. / 5 holes: PP (polypropylene): approx. 150g / 1 sheet: 10 sheets

FEATURES• Matte coating restrains halation• Center hole for a datum point• Four fixing holes at the corners (Nails are not included)

Restrain halation PP : Hardly bend yet flexible

Center holefor a coordinate

Back

Front




2020.07

Drone mounted LiDAR System TDOT series

LiDAR SYSTEM

A LiDAR SYSTEM REVOLUTION - INS(IMU × GNSS) × LASER SCANNER × DRONE -Scan under trees and water (TDOT GREEN), small & light sized body gives you precision measuring values.

TDOT GREENTDOT 02Image of mounting to DJI Matrice 600 Pro

MODELMaximum distanceAccuracy

Laser pulse rateField of viewEcho switchingScan speedLaser wavelengthBathymetric surveyLifespanDimensionsWeight

TDOT 02≥30%~200m over±4mm@50m±20mm@150m60,000Hz / sec.90° (±45°)1st / Last / 1st&Last / 4echoes30 scanning / sec.905 ±1nm-10,000 hoursW260 × H150 × D186mm1.8kg

TDOT GREEN≥10% 158m ≥60% 300m over≥10% ±15mm ≥60% ±5mm60,000Hz / sec.90° (±45°)1st / Last / 1st&Last / 4echoes30 scanning / sec.532 ±1nmYes10,000 hoursW260 × H150 × D220mm2.6kg

SPECIFICATIONS

SET CONTENTS• Drone LiDAR system TDOT 02(Near-infrared) / TDOT GREEN(Green laser)• Dedicated GNSS antenna• Alignment flight checker• Mobile battery• Designated carrying case• Pre-checking application “TDOT Pre PROCESSING”• Processing applicatiom “TDOT PROCESSING”• Application software “UNDERWATER CORRECT” *TDOT GREEN only• Manual

Difference between Photogrammetry and LiDAR surveyingDifference between Photogrammetry and LiDAR surveying

Photogrammetry survey : Analyzes lots of continuous photos which deployed geometrically. Work flow of photogrammetry requires lots of time. Accuracy will rely on photo resolution and overlap rate for target area. LiDAR survey : Measures target directly and analyzes captured data. Accuracy will rely on GNSS and INS(IMU × GNSS).

High VersatilityOperator does not need to be aexperienced land surveyor.Simple practice will do.

High ProductivityGetting a few days of workdone in just a few hours.

Photogrammetry LiDARShort analysis time

Able to shorten the time compared withphotogrammetry survey analysis.

No side lap required

Photogrammetry LiDAR

Flight plan Measurement area

<Photogrammetry>Require outside field flight

<LiDAR>Complete inside of field

FEATURES

Photogrammetry LiDAR

Before After

Bathymetry (TDOT GREEN)Green laser is able to scan the water surface and underwater depth at the sametime. For various topographical survey of coast, river, wet ground and asphalt.

Elevation stepdrawing

Shadow plot

Able to capture terrestrial point cloud dataunder tree. Some of emitted laser will reachto the ground among the gap of bush andleaves.

Under tree canopies

Filtering treesDirect measurement of topography undertree canopies by pulse rate 60,000 pulseper second.

INS : Inertial Navigation SystemINS is high accuracy position & attitudesensor by combining GNSS and IMU.GNSS itself cannot achieve high accuracypositioning information unlike INS integratedsystem can do.

INS SPECIFICATIONSHorizontal accuracyHeight accuracyAttitude accuracy

: ±10mm: ±20mm: Yaw : ±0.02° Pitch / Roll : ±0.01°

*INS specification is improved accuracy after processed by “TDOT POST-PROCESSING CLOUD”.

new professional products for professionals · 2020. 7. 30. · carbon fiber pole / 2,600mm rcp-260...

Documents