new publications program standard title date posted scope · 2019-05-04 · energy csa exp07:19...

Browse By Group:

Last updated: May 3, 2019

View All

New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Current List of Endorsed Standards | Formal Interpretations | Informs & Certification Notices | Previous Reports

New Publications

This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store.Program Standard Title Date Posted ScopeEnergy CSA SPE 2254:19 Guide to wood chip fuel: Characteristics, supply, storage, and

procurement5/1/2019

Construction Products and Materials

CSA A440.4:19 Installation des fenêtres, des portes et des lanterneaux 5/1/2019

Energy CSA/ANSI Z21.54:19/CSA 8.4:19

Gas hose connectors for portable outdoor gas-fired appliances 5/1/2019

Electrical / Electronics CSA C22.2 NO.60691:19

Thermal-links - Requirements and application guideProtecteurs thermiques - Exigences et guide d'application

5/1/2019

Electrical / Electronics CSA C60079-13:19 Explosive atmospheres - Part 13: Equipment protection by 5/1/2019

of 29Current Standards Activities

5/4/2019https://standardsactivities.csa.ca/recent_infoupdate.asp

pressurized room “p” and artificially ventilated room “v”Atmosphères explosives - Partie 13 : Protection du matériel par salle à surpression interne « p » et salle à ventilation artificielle « v »

Electrical / Electronics CSA C653:18 Performances photométriques des luminaires de route et de rue 5/1/2019

Electrical / Electronics CSA SPE-3000:19 Model Code for the field evaluation of medical electrical equipment (MEE) and medical electrical systems (MES)

5/1/2019

Life Sciences CSA Z8000:18 Établissements de santé canadiens 5/1/2019

Life Sciences CSA Z241 SÉRIE:18 Maisons mobiles de parc 5/1/2019

Energy CSA N288.9:18 Ligne directrice pour la conception de programmes de captage et d'entraînement des poissons dans les installations nucléaires

5/1/2019

Electrical / Electronics IEEE Std 844.3TM-2019/CSA C22.2 No.293.3:19

IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment — General, Testing, Marking, and DocumentationRequirements

4/30/2019

Electrical / Electronics IEEE Std 844.4TM-2019/CSA C293.4:19

IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - Application Guide for Design, Installation, Testing, Commissioning, and Maintenance

4/30/2019


CSA S478:19 Durability in buildings 4/26/2019

Electrical / Electronics CSA C22.2 No. 320:19 Controlled outlets 4/16/2019

Electrical / Electronics CSA C22.2 No. 60335-2-31:19

Household and similar electrical appliances — Safety — Part 2-31: Particular requirements for range hoods and other cooking fume extractorsAppareils électrodomestiques et analogues — Sécurité — Partie 2-31 : Règlesparticulières pour les hottes de cuisine et autres extracteurs de fumées de cuisson(IEC 60335-2-31:2012+A1:2016, MOD)

4/16/2019


Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-12: Particular requirements for transportable threading machinesOutils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-12 : Exigences particulières relatives aux machines à fileter portables(IEC 62841-3-12:2017, MOD)

4/16/2019

Electrical / Electronics CSA C22.2 No. 62841- Electric motor-operated hand-held tools, transportable tools and 4/16/2019



3-14:19 lawn and garden machinery — Safety — Part 3-14: Particular requirements for transportable drain cleanersOutils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 3-14 : Exigences particulières pour les furets portables(IEC 62841-3-14:2017, MOD)

Electrical / Electronics CSA C300:18 Performance énergétique et capacité des réfrigérateurs, desréfrigérateurs-congélateurs, des congélateurs et des appareils deréfrigération divers

4/5/2019

Electrical / Electronics CSA C804:18 Performances énergétiques des distributeurs automatiques de boissons refroidies en canette et en bouteille

4/5/2019

Life Sciences CSA Z259.10:18 Harnais de sécurité 4/5/2019


CSA A440S1:19 Supplément canadien à AAMA/WDMA/CSA 101/I.S.2/A440-17, Norme nordaméricaine sur les fenêtres/Spécification relative aux fenêtres, aux portes et aux lanterneaux

4/3/2019


CSA A440.2:19/CSAA440.3:19

Fenestration energy performance/User Guide to CSA A440.2:19, Fenestration energy performanceRendement énergétique des systèmes de fenêtrage / Guide d’utilisation de CSA A440.2:19, Rendement énergétique des systèmes de fenêtrage

4/2/2019

Energy CSA B139 SERIES:19 Installation code for oil-burning equipmentCode d’installation des appareils de combustion au mazout

4/2/2019

Life Sciences CSA B651:18 Conception accessible pour l’environnement bâti 4/2/2019

Life Sciences CSA B651HB:18 Conception accessible pour l’environnement bâti - Guide sur la mise en oeuvre

4/2/2019

Energy CSA EXP07:19 Load-based and climate-specific testing and rating procedures for heat pumps and air conditioners

3/29/2019

Life Sciences CSA B51:19 Boiler, pressure vessel, and pressure piping code This 3/29/2019


CSA A440.4:19 Window, door, and skylight installation 3/29/2019


CSA W200:18 Conception des systèmes de biorétention 3/29/2019

Life Sciences CSA Z107.56:18 Mesure de l’exposition au bruit 3/29/2019

Life Sciences CSA Z387:19 Safe use of electrosurgical medical devices and systems in health 3/29/2019



care

Life Sciences CSA Z45001:19 Occupational health and safety management systems -Requirements with guidance for useSystèmes de management de la santé et de la sécurité au travail- Exigences et lignes directrices pour leur utilization(ISO 45001:2018, MOD)

3/29/2019

Life Sciences Amendment 1:2019 toCAN/CSA-Z5359:16

Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systemsISO 5359:2014

3/29/2019

Life Sciences Modification 1:2019 toCAN/CSA-Z5359:16

Matériel d’anesthésie et de reanimation respiratoire — Flexibles de raccordement à basse pression pour utilisation avec les gaz médicaux, les gaz médicaux de soutien et les systèmesd’évacuation des gaz d’anesthésieISO 5359:2014

3/29/2019

Life Sciences CSA Z98:19 Passenger ropeways and passenger conveyors 3/29/2019

Life Sciences CSA Z259.18:19 Counterweighted guardrail systems 3/29/2019

Life Sciences CSA ISO 18835:19 Inhalational anaesthesia systems — Draw-over anaesthetic systemsISO 18835:2015

3/29/2019

Life Sciences CSA ISO/TR 13154:19 Medical electrical equipment — Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermographISO/TR 13154:2017

3/29/2019

Life Sciences CSA ISO 11195:19 Gas mixers for medical use — Stand-alone gas mixersISO 11195:2018

3/29/2019

Life Sciences CSA ISO 5367:19 Anaesthetic and respiratory equipment - Breathing sets and connectorsMatériel d’anesthésie et de réanimation respiratoire - Systèmes respiratoires et raccords(ISO 5367:2014)

3/29/2019

Energy CSA/ANSI 3.21:19 Industrial gas-fired natural draft heaters for installation in non-hazardous and hazardous locations in oil and gas process applications

3/29/2019

Energy CSA B401:18 Code sur les établissements d’entretien de véhicules 3/29/2019

Life Sciences CSA Z463:18 Entretien des systèmes électriques 3/29/2019



Energy CSA N291:19 Requirements for nuclear safety-related structures 3/27/2019

Environment CSA R7008:19 Sustainability standard for household dehumidifier appliances 3/27/2019

Energy CSA/ANSI FC 6:19 Fuel cell technologies — Part 2: Fuel cell modules 3/26/2019

Energy CSA N292.0:19 General principles for the management of radioactive waste and irradiated fuel

3/15/2019


CSA A440S1:19 Canadian Supplement to AAMA/WDMA/CSA 101/I.S.2/A440-17, North American Fenestration Standard/Specification for windows, doors, and skylights

3/15/2019


Medical electrical equipment — Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessoriesAppareils électromédicaux — Partie 2-2 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils d’électrochirurgie à courant haute fréquence et des accessoires d’électrochirurgie à courant haute fréquence(IEC 60601-2-2:2017, MOD)

3/15/2019

Electrical / Electronics CSA C22.2 nº 0.12:19 Espace de câblage et espace de pliage de fils dans les boîtiers 3/15/2019

Energy CSA C296:19 Energy performance of walk-in freezer and walk-in coolercomponents

3/15/2019

Life Sciences CSA ISO 35106:19 Petroleum and natural gas industries — Arctic operations —Metocean, ice, and seabed data(ISO 35106:2017, IDT)

3/13/2019

Environment CSA ISO 50001:19 Energy management systems - Requirements with guidance for use(ISO 50001:2018)

3/13/2019

Environment CSA ISO 50001:19 Systèmes de management de l'énergie — Exigences etrecommandations pour la mise en oeuvre(ISO 50001:2018)

3/13/2019

Life Sciences CSA ISO 35101:19 Petroleum and natural gas industries — Arctic operations —Working environment(ISO 35101:2017)

3/6/2019

Life Sciences CSA ISO 35101:19 Industries du pétrole et du gaz naturel — Opérations en Arctique — Environnement de travail(ISO 35101:2017)

3/6/2019

Life Sciences CSA ISO 35103:19 Petroleum and natural gas industries - Arctic operations - 3/6/2019



Environmental monitoring(ISO 35103:2017)

Life Sciences CSA ISO 35103:19 Industries du pétrole et du gaz naturel - Opérations en Arctique -Surveillance del’environnement(ISO 35103:2017)

3/6/2019

Life Sciences CSA B44.1:19/ASME A17.5-2019

Elevator and escalator electrical equipment 2/28/2019

Electrical / Electronics CSA C22.2 No. 2515:19 Aboveground reinforced thermosetting resin conduit (RTRC) andfittings

2/28/2019

Electrical / Electronics CSA C22.2 NO. 227.1:19

Electrical nonmetallic tubing 2/28/2019

Electrical / Electronics CSA C22.2 No. 60079-0:19

Explosive atmospheres — Part 0: Equipment — General requirementsAtmosphères explosives — Partie 0 : Matériel — Exigencesgénérales

2/28/2019

Life Sciences CSA B175.6:19 Internal combustion engine–powered hand-held hedge trimmers — Safety and environmental requirements(ANSI/OPEI B175.6-2018)

2/20/2019


CSA A440.4:18 Installation des fenêtres, des portes et des lanterneauxNorme nationale du Canada

2/20/2019

Electrical / Electronics CSA C22.2 No. 0.1:19 General requirements for double-insulated equipmentNational Standard of Canada

2/20/2019

Electrical / Electronics CSA C22.2 No. 0.12:19 Wiring space and wire bending space in enclosuresNational Standard of Canada

2/20/2019

Electrical / Electronics CSA C22.2 No. 0.8:19 Safety functions incorporating electronic technologyNational Standard of Canada

2/20/2019

Electrical / Electronics CSA C22.2 NO.227.2.1:19

Liquid-tight flexible nonmetallic conduitNational Standard of Canada

2/20/2019

Electrical / Electronics CSA C22.2 NO. 60320-1:19

Appliance couplers for household and similar general purposes -Part 1: General requirementsConnecteurs pour usages domestiques et usages générauxanalogues - Partie 1 : Exigences générales

2/20/2019

Electrical / Electronics CSA C881:19 Performance of general service integrated lamps National Standard of Canada

2/20/2019




CSA W201:18 Construction des systèmes de biorétentionNorme nationale du Canada

2/20/2019

Energy CSA Z663:18 Aménagement du territoire à proximité de réseaux decanalisationsNorme nationale du Canada

2/20/2019

Life Sciences CSA Z94.4:18 Choix, utilisation et entretien des appareils de protection respiratoireNorme nationale du Canada

2/20/2019

Electrical / Electronics CSA C802.2:18 Méthode d’essai et valeurs minimales de rendement pour les transformateurs à secNorme nationale du Canada

2/20/2019

Electrical / Electronics CSA C22.2 NO. 60320-3:19

Appliance couplers for household and similar general purposes -Part 3: Standard sheets and gaugesConnecteurs pour usages domestiques et usages généraux analogues - Partie 3 : Feuilles de norme et calibres

2/20/2019

Communications /Information

CSA ISO/IEC 29167-10:19

Information technology - Automatic identification and data capture techniques - Part 10: Crypto suite AES-128 security services for air interface communications

2/12/2019


CSA ISO/IEC 29794-4:19

Information technology - Biometric sample quality - Part 4: Finger image data

2/12/2019


CSA ISO/IEC 30113-11:19

Information technology - Gesture-based interfaces across devices and methods - Part 11: Single-point gestures for common system actions

2/12/2019


CSA ISO/IEC 29341-28-1:19

Information technology - UPnP Device Architecture - Part 28-1: Multiscreen device control protocol - Multiscreen architecture

2/12/2019


CSA ISO/IEC 29341-28-2:19

Information technology - UPnP Device Architecture - Part 28-2: Multiscreen device control protocol - Screen device

2/12/2019


CSA ISO/IEC 29341-28-10:19

Information technology - UPnP Device Architecture - Part 28-10: Multiscreen device control protocol - Application management service

2/12/2019



Information technology - Generic cabling for customer premises -Part 1: General requirements

2/12/2019



Information technology - Generic cabling for customer premises -Part 2: Office premises

2/12/2019

Communications / CSA ISO/IEC 11801- Information technology - Generic cabling for customer premises - 2/12/2019



Information 3:19 Part 3: Industrial premises



Information technology Generic cabling for customer premises -Part 4: Single-tenant homes

2/12/2019



Information technology - Generic cabling for customer premises -Part 5: Data centres

2/12/2019



Information technology - Generic cabling for customer premises -Part 6: Distributed building services

2/12/2019


CSA ISO/IEC 29341-20-1:19

Information technology - UPnP Device Architecture - Part 20-1: Audio video device control protocol - Level 4 - Audio video architecture

2/12/2019


CSA ISO/IEC 29341-20-2:19

Information technology - UPnP Device Architecture - Part 20-2: Audio video device control protocol - Level 4 - Media renderer device

2/12/2019


CSA ISO/IEC 29341-20-3:19

Information technology - UPnP Device Architecture - Part 20-3: Audio video device control protocol - Level 4 - Media server device

2/12/2019


CSA ISO/IEC 29341-20-4:19

Information technology - UPnP Device Architecture - Part 20-4: Audio video device control protocol - Level 4 - Data structure template

2/12/2019


CSA ISO/IEC 29341-20-10:19

Information technology - UPnP Device Architecture - Part 20-10: Audio video device control protocol - Level 4 - Audio video transport service

2/12/2019


CSA ISO/IEC 29341-20-11:19

Information technology - UPnP Device Architecture - Part 20-11: Audio video device control protocol - Level 4 - Connection manager service

2/12/2019


CSA ISO/IEC 29341-20-12:19

Information technology - UPnP Device Architecture - Part 20-12: Audio video device control protocol - Level 4 - Content directory service

2/12/2019


CSA ISO/IEC 29341-20-13:19

Information technology - UPnP Device Architecture - Part 20-13: Audio video device control protocol - Level 4 - Rendering control service

2/12/2019


CSA ISO/IEC 29341-20-14:19

Information technology - UPnP Device Architecture - Part 20-14: Audio video device control protocol - Level 4 - Scheduled recording service

2/12/2019

Communications / CSA ISO/IEC 29341-27- Information technology - UPnP Device Architecture - Part 27-1: 2/12/2019



Information 1:19 Friendly device control protocol - Friendly information update service



Information technology - Home electronic system (HES) interfaces - Part 3: Modular communications interface for energymanagement

2/11/2019


CSA ISO/IEC 14165-151:19

Information technology - Fibre channel - Part 151: Fibre Channel BaseT (FC-BaseT)

2/11/2019


CSA ISO/IEC 14776-154:19

Information technology - Small computer system interface (SCSI) - Part 154: Serial Attached SCSI - 3 (SAS-3)

2/11/2019



Information technology - Media context and control - Part 7: Conformance and reference software

2/11/2019



Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 1: MPEG media transport (MMT)

2/11/2019


CSA ISO/IEC 29341-24-1:19

Information technology - UPnP Device Architecture - Part 24-1: Internet gateway device control protocol - Level 2 - Internet gateway device

2/11/2019


CSA ISO/IEC 29341-24-2:19

Information technology - UPnP Device Architecture - Part 24-2: Internet gateway device control protocol - Level 2 - Wide area network connection device

2/11/2019


CSA ISO/IEC 29341-24-3:19

Information technology - UPnP Device Architecture - Part 24-3: Internet gateway device control protocol - Level 2 - Wide area network device

2/11/2019


CSA ISO/IEC 29341-24-10:19

Information technology - UPnP Device Architecture - Part 24-10: Internet gateway device control protocol - Level 2 - Wide area network internet protocol - Connection service

2/11/2019


CSA ISO/IEC 29341-24-11:19

Information technology - UPnP Device Architecture - Part 24-11: Internet gateway device control protocol - Level 2 - Wide area network internet protocol v6 - Firewall control service

2/11/2019


CSA ISO/IEC 29341-26-1:19

Information technology - UPnP Device Architecture - Part 26-1: Telephony device control protocol - Level 2 - elephony architecture

2/11/2019


CSA ISO/IEC 29341-26-2:19

Information technology - UPnP Device Architecture - Part 26-2: Telephony device control protocol - Level 2 - Telephony client device

2/11/2019




CSA ISO/IEC 29341-26-3:19

Information technology - UPnP Device Architecture - Part 26-3: Telephony device control protocol - Level 2 - Telephony server device

2/11/2019


CSA ISO/IEC 29341-26-10:19

Information technology - UPnP Device Architecture - Part 26-10: Telephony device control protocol - Level 2 - Call management service

2/11/2019


CSA ISO/IEC 29341-26-11:19

Information technology - UPnP Device Architecture - Part 26-11: Telephony device control protocol - Level 2 - Media management service

2/11/2019


CSA ISO/IEC 29341-26-12:19

Information technology - UPnP Device Architecture - Part 26-12: Telephony device control protocol - Level 2 - Messaging service

2/11/2019


CSA ISO/IEC 29341-26-13:19

Information technology - UPnP Device Architecture - Part 26-13: Telephony device control protocol - Level 2 - Phone management service

2/11/2019


CSA ISO/IEC 29341-26-14:19

Information technology - UPnP Device Architecture - Part 26-14: Telephony device control protocol - Level 2 - Address book service

2/11/2019


CSA ISO/IEC 29341-26-15:19

Information technology - UPnP Device Architecture - Part 26-15: Telephony device control protocol - Level 2 - Calendar service

2/11/2019


CSA ISO/IEC 29341-26-16:19

Information technology - UPnP Device Architecture - Part 26-16: Telephony device control protocol - Level 2 - Presence service

2/11/2019


CSA ISO/IEC 29341-29-2:19

Information technology - UPnP Device Architecture - Part 29-2: Multiscreen device control protocol - Level 2 - Screen device

2/11/2019


CSA ISO/IEC 29341-29-10:19

Information technology - UPnP Device Architecture - Part 29-10: Multiscreen device control protocol - Level 2 - Application management service

2/11/2019


CSA ISO/IEC 29341-30-1:19

Information technology - UPnP Device Architecture - Part 30-1: IoT management and control device control protocol - IoT management and control architecture overview

2/11/2019


CSA ISO/IEC 29341-30-2:19

Information technology - UPnP Device Architecture - Part 30-2: IoT management and control device control protocol - IoT management and control device

2/11/2019


CSA ISO/IEC 29341-30-10:19

Information technology - UPnP Device Architecture - Part 30-10: IoT management and control device control protocol - Data store service

2/11/2019




CSA ISO/IEC 29341-30-11:19

Information technology - UPnP Device Architecture - Part 30-11: IoT management and control device control protocol - IoT management and control data model service

2/11/2019


CSA ISO/IEC 29341-30-12:19

Information technology - UPnP Device Architecture - Part 30-12: IoT management and control device control protocol - IoT management and control transport generic service

2/11/2019


CSA ISO/IEC 29341-31-1:19

Information technology - UPnP Device Architecture - Part 31-1: Energy management device control protocol - Energy management service

2/11/2019


CSA ISO/IEC 30182:19 Smart city concept model - Guidance for establishing a model for data interoperability

2/11/2019

Supplements

Supplements are issued periodically for some standards. This section lists those recently published. Program Standard Title Date Posted Scope

No activity to report

Amendments

Amendments are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeElectrical / Electronics C22.2 NO. 18.2-06

(R2016), Update No. 2 Nonmetallic outlet boxesRevised Clauses 2.1, 4.2.6.1, and 5.2.3 and Table B.1New NoneDeleted Clause 6.12 and Figures 20 and 21

5/1/2019

Electrical / Electronics C22.2 NO. 5-16, Update No. 1

Molded-case circuit breakers, molded-case switches, and circuit-breaker enclosures

5/1/2019

Electrical / Electronics CSA C22.2 NO. 60601-2-37:08 (R2019), Amendment 1:2019

Medical electrical equipment — Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonicmedical diagnostic and monitoring equipmentAppareils électromédicaux – Partie 2-37 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils de diagnostic et de surveillance médicaux à ultrasons

5/1/2019



Electrical / Electronics CAN/CSA-C22.2 No. 60601-2-43:11 (R2016),Amendment 1:2019

Medical electrical equipment — Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional proceduresAppareils électromédicaux — Partie 2-43 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X lors d’interventions

5/1/2019


Z240 MH Series-16, Update No. 1

Manufactured homesZ240.0.1-16Clause 3

5/1/2019


Z240 MM SÉRIE-16, Mise à jour nº1

Maisons usinéesZ240.0.1-16Article 3

5/1/2019

Electrical / Electronics CAN/CSA-C22.2 No. 60335-2-15:14, Update No. 1

Household and similar electrical appliances — Safety — Part 2-15: Particular requirements for appliances for heating liquidsAppareils électrodomestiques et analogues — Sécurité — Partie 2-15 : Règles particulières pour les appareils de chauffage desliquidesCanadian deviations rationaleClauses 3.1.9.107A, 3.113D, 3.113E, 3.113F, 3.113G, 3.113H,6.1, 6.2, 7.1, 7.12, 7.16F, 11, 19, 21.1, 22.7, 22.106A, 22.111,22.114H, 22.114I, 22.114J, 22.114K, 25.7, and 25.8DV.1

4/16/2019

Electrical / Electronics CAN/CSA-C22.2 NO. 62841-1-15, Update No.3

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: GeneralrequirementsTitle page, copyright page, Preface, Clause 8.12DV, andTable DVA

4/5/2019

Electrical / Electronics CAN/CSA-C22.2 NO. 62841-1-15, Mise à jour nº 3

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 1 : Règles generalesPage titre, préface, article 8.12DV et tableau DVA

4/5/2019

Electrical / Electronics CAN/CSA-C22.2 No. 60745-1-07 (R2017), Update No. 4

Hand-held motor-operated electric tools — Safety — Part 1:General requirementsTitle page, copyright page, Preface, and Clauses K.18.1DV.1 andK.18.1DV.2

4/5/2019

Electrical / Electronics CAN/CSA-C22.2 No. 60745-1-07 (C2017), Mise à jour nº 4

Outils électroportatifs à moteur - Sécurité — Partie 1 : Règles générales Page titre, page des droits d’auteur, préface etarticles K.18.1DV.1 et K.18.1DV.2

4/5/2019

Electrical / Electronics Amendment 1:2019 (IDT) to CAN/CSA-C22.2

Medical electrical equipment — Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral

4/5/2019



No. 60601-2-63:15 X-ray equipmentAppareils électromédicaux — Partie 2-63 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X dentaires extra-oraux

(IEC 60601-2-63:2012, MOD)

Electrical / Electronics C22.2 No. 254-05 (C2015), Mise à jour no3

Centre de commande des moteursModification Page titre, page des droits d’auteur, préface, articles 8.2.1.1, 8.2.1.2, 8.2.7.1,9.3.4 et 9.15.2.2, tableau 17 et annexe CAjout Article 8.2.27.10 et tableaux 41 et 42

4/3/2019


Amendment 3:2019 to CAN/CSA-ISO/IEC 14496-16:13 (R2017)

Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) - AMENDMENT 3:Printing material and 3D graphics coding for browsers(ISO/IEC 14496-16:2011)

4/2/2019


Amendment 4:2019 to CAN/CSA-ISO/IEC 14496-16:13 (R2017)

Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) AMENDMENT 4:Pattern-based 3D mesh coding (PB3DMC)(ISO/IEC 14496-16:2011)

4/2/2019


Amendment 1:2019 to CAN/CSA-ISO/IEC23003-4:16

Information technology — MPEG audio technologies — Part 4: Dynamic Range Control AMENDMENT 1: Parametric DRC, gain mapping and equalization tools(ISO/IEC 23003-4:2015)

4/2/2019


Amendment 2:2019 to CAN/CSA-ISO/IEC23003-4:16

Information technology — MPEG audio technologies — Part 4: Dynamic Range Control - AMENDMENT 2: Reference software(ISO/IEC 23003-4:2015)

4/2/2019


CAN/CSA-S37-18, Update No. 1

Antennas, towers, and antenna-supporting structuresPrefaceClauses 0, 2, 3.1, 4.5.2, 5.2.2, 5.3.1, 7.5.3, D.3, E.5, L.5, and S.4.5Annex TTable N.3

4/2/2019

Life Sciences Amendment 1:2019 to CAN/CSA-ISO 10079-1:16

Medical suction equipment — Part 1: Electrically powered suction equipment - AMENDMENT 1: Changes to requirements foroperating at extremes of temperature(ISO 10079-1:2015/AMD 1:2018)

3/29/2019

Life Sciences Modification 1:2019 to CAN/CSA-ISO 10079-1:16

Appareils d’aspiration médicale — Partie 1 : Appareils électriques d’aspiration - AMENDEMENT 1 : Modifications des exigences de fonctionnement à des valeurs extrêmes de température

3/29/2019



(ISO 10079-1:2015/AMD 1:2018)

Electrical / Electronics CSA C22.2 NO. 130:16 Requirements for electrical resistance trace heating and heating device setsNational Standard of Canada

PrefaceClauses 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2, 4.2, 4.3.1, 6.2.6.1, 6.2.6.4.1, 6.2.6.4.6, 6.2.6.4.7, 6.2.6.4.8.2, 6.2.6.4.8.3, 6.2.6.4.8.4, 6.2.6.4.8.5, 6.2.6.4.9, 6.2.11.2, B.2, B.2.1, B.2.2.3, C.2.3, and C.2.8.2Annexes C and DTable E.1Figures 7 and C.2

3/29/2019

Energy N287.6-11 (R2016), Update No. 1

Pre-operational proof and leakage rate testing requirements for concrete containment structures for nuclear power plantsTable 1

3/27/2019

Energy N287.6-11 (C2016), Mise à jour nº1

Exigences relatives aux essais préopérationnels de pressurization et de débit de fuite des enceintes de confinement en béton des centrales nucléairesTableau 1

3/27/2019

Energy N287.3-14 (C2019), Mise à jour nº1

Exigences relatives à la conception des enceintes de confinement en béton des centrales nucléairesArticles 2, 3.1, 4.1.2, 6.3, 12.2.3, 14.2.1, 14.2.3, 14.2.4, 14.2.5, 14.2.7, 14.3.1, 14.3.1A, A.2 et A.2.2.1Annexes D et ETableau 7.1

3/27/2019

Electrical / Electronics CSA C22.2 No. 18.4-15, Update No. 1

Hardware for the support of conduit, tubing, and cableRevised Cover, copyright page, Preface, and Clause 1.4New Clauses 3.1A, 3.3A, 5.4, 7.2.3 a), 7.2.3 b), 7.2.3 c), 10A, 11.10, 11.11, and11.12 and Tables 10 and 11

3/26/2019

Electrical / Electronics Amendment 1:2019 (IDT) to CAN/CSA-C22.2 No. 60601-2-65:15

Medical electrical equipment — Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment Appareils électromédicaux — Partie 2-65 : Exigences particulières pour la sécurité de base et les performances essentielles des appareils à rayonnement X dentaires intra-oraux(IEC 60601-2-65:2012, MOD)

3/15/2019

Electrical / Electronics CAN/CSA-C22.2 No. Medical electrical equipment — Part 2-20: Particular requirements 2/28/2019



60601-2-20:10 (R2019) for the basic safety and essential performance of infant transport incubatorsAppareils électromédicaux — Partie 2-20 : Exigences particulières pour la sécurité de base et les performances essentielles des incubateurs de transport pour nouveau-nés

Energy N285.0-17/N285.6Series-17

General requirements for pressure- retaining systems and components in CANDU nuclear power plants/ Material Standardsfor reactor components for CANDU nuclear power plantsTechnical CommitteeN285.0-17Clauses 1.1, 1.3, 2, 3, 4.3, 5.1.1, 5.1.4, 5.1.7, 5.2.4.1.2, 5.2.4.1.3, 5.2.4.2.1, 5.3.2.1, 6.1.1.1, 6.1.1.3, 6.1.1.4, 6.1.9, 6.2.3, 6.2.3.1, 7.2, 7.3.1, 7.3.3, 7.6.7, 7.7, 8.1.5.2, 8.4, 10.1.1, 10.1.2, 10.2, 10.3.1, 10.4, 10.6, 10.6.1, 10.6.2, 10.6.2.2, 10.6.3, 10.7, 10.7.1, 10.7.2, 10.7.3, 10.7.4, 10.7.5, 11.1.4, 11.1.8, 12.2.3, 12.2.6, 14.5.2.4, 14.5.2.5, 14.5.3.1, 15, E.2.3.3.3, H.1.1, H.4, K.1.1, and K.2.6Figures C.4 and H.1N285.6.4-17Clause 7.6

2/20/2019

Errata

Errata are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeLife Sciences CSA Z1000:14 Occupational health and safety management

National Standard of Canada status removed — April 2019Outside front cover, Title page, Preface, National Standard ofCanada text (deleted)

4/30/2019

Life Sciences CSA Z1000:14 Gestion de la santé et de la sécurité au travailStatut de Norme nationale du Canada retiré — Avril 2019Page couverture, Page titre, Préface, Texte sur la Normenationale du Canada (supprimé)

4/30/2019

Life Sciences Z7396.1-17 Medical gas pipeline systems — Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systemsClauses 3, 7.2.1, A.5.8.3.6.1, A.8.3.9, D.5.5, and E.10Tables D.4, E.1, E.2, and E.5Figure A.2

3/29/2019



Life Sciences Z7396.1-17 Réseaux de distribution de gaz médicaux — Partie 1 : Canalisations pour les gaz médicaux, l’aspiration médicale, les gaz de soutien medical et les systèmes d’évacuation des gaz d’anesthésieArticles 3, 7.2.1, A.5.8.3.6.1, A.8.3.9, D.5.5 et E.10Tableaux D.4, E.1, E.2 et E.5Figure A.2

3/29/2019

Energy ANSI Z83.20-2016/CSA2.34-2016

Gas-fired tubular and low-intensity infrared heatersClause 5.14Tables 10 and A.1

2/28/2019


CAN/CSA-B127.3-18 Fibrocement drain, waste, and vent pipe and pipe fittingsClause A.4.4

2/28/2019


CSA B805-18/ICC 805-2018

Rainwater harvesting systemsSystèmes de récupération d’eau de pluie

Clause C.5

2/28/2019

Electrical / Electronics CAN/CSA-C22.2 NO. 60601-2-20-10 (R2019),Corrigendum 2:2019 (IDT)

Medical electrical equipment — Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubatorsAppareils électromédicaux — Partie 2-20 : Exigences particulières pour la sécurité de base et les performances essentielles des incubateurs de transport pour nouveau-nés

2/28/2019


AAMA/WDMA/CSA101/1.S.2/A440-17

Norme nord-américaine sur les fenêtres/Spécification relative aux fenêtres, aux portes et aux lanterneauxAnnexe D

2/28/2019

Endorsements

This section lists endorsed standards, which are standards that have been developed by another standards development organization and approved by the appropriate CSA Technical Committee for use in Canada. Endorsed standards are not sold by CSA. Program Standard Title Date Posted Scope

No activity to report

Reaffirmations

The standards listed in this section have been reviewed to determine if they remain technically valid and have been reaffirmed as acceptable for use until the next edition is published or for a further five years (whichever comes first).



Program Standard Title Date Posted ScopeElectrical / Electronics C747-09 (R2019) Energy efficiency test methods for small motors 5/3/2019

Electrical / Electronics CAN/CSA-ISO/IEC 10118-3:04 (R2019)

NFORMATION TECHNOLOGY - SECURITY TECHNIQUES -HASH-FUNCTIONS - PART 3: DEDICATED HASH-FUNCTIONS

5/3/2019


INFORMATION TECHNOLOGY - DATABASE LANGUAGES -SQL MULTIMEDIA AND APPLICATION PACKAGES - PART 5: STILL IMAGE

5/3/2019


INFORMATION TECHNOLOGY - CODING OF AUDIO-VISUALOBJECTS - PART 14: MP4 FILE FORMAT

5/3/2019


CAN/CSA-ISO/IEC 12087-1-00 (R2019)

Information Technology - Computer Graphics and ImageProcessing - Image Processing and Interchange (IPI) - FunctionalSpecification - Part 1: Common Architecture for Imaging

5/2/2019


CAN/CSA-ISO/IEC 12087-2-00 (R2019)

Information Technology - Computer Graphics and ImageProcessing - Image Processing and Interchange (IPI) - FunctionalSpecification - Part 2: Programmer's Imaging Kernel System Application Program Interface

5/2/2019


CAN/CSA-ISO/IEC 12088-4-00 (R2019)

Information Technology - Computer Graphics and ImageProcessing - Image Processing and Interchange - Application Program Interface Language Bindings - Part 4: C

5/2/2019


CAN/CSA-ISO/IEC 13249-2-00 (R2019)

Information Technology - Database Languages - SQL Multimedia and Application Packages - Part 2: Full-Text

5/2/2019


CAN/CSA-ISO/IEC 13250:04 (R2019)

Information technology - SGML applications - Topic maps 5/2/2019


CAN/CSA-ISO/IEC 13522-1-00 (R2019)

Information Technology - Coding of Multimedia and Hypermedia Information - Part 1: MHEG Object Representation - BaseNotation (ASN.1)

5/2/2019


CAN/CSA-ISO/IEC 13522-3-00 (R2019)

Information Technology - Coding of Multimedia and Hypermedia Information - Part 3: MHEG Script Interchange Representation

5/2/2019


CAN/CSA-ISO/IEC 13712-1-00 (R2019)

Information Technology - Remote Operations: Concepts, Model and Notation

5/2/2019


CAN/CSA-ISO/IEC 13719-2-00 (R2019)

Information Technology - Portable Common Tool Environment (PCTE) - Part 2: C Programming Language Binding

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows -

5/2/2019



Call Transfer supplementary Service



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Call Completion Supplementary Services

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows -Call Diversion Supplementary Services

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Path Replacement Additional Network Feature

5/2/2019


CAN/CSA-ISO/IEC 14568-00 (R2019)

Information Technology - DXL: Diagram Exchange Language for Tree-Structured Charts

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Call Offer Supplementary Service

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network Inter-Exchange Signalling Protocol - Do Not Disturb and Do Not Disturb Override Supplementary Services

5/2/2019



Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network- Inter-exchange signalling protocol - Call Intrusion supplementaryservice

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Advice Of Charge Supplementary Services

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows -Recall Supplementary Service

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services

5/2/2019



Network - Specification, Functional Model and Information Flows -Call Interception Additional Network Feature



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Call Interception Additional Network Feature

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Wireless Terminal Location Registration Supplementary Service and Wireless Terminal Information Exchange Additional Network Feature

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Wireless Terminal Call Handling Additional Network Features

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Wireless Terminal Authentication Supplementary Services

5/2/2019


CAN/CSA-ISO/IEC 15504-2:04 (R2019)

Software Engineering - Process Assessment - Part 2: Performing an Assessment

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows -Transit Counter Additional Network Feature

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Common Information Additional Network Feature

5/2/2019


CAN/CSA-ISO/IEC 15938-5:04 (R2019)

Information Technology - Multimedia Content Description Interface - Part 5: Multimedia Description Schemes

5/2/2019


CAN/CSA-ISO/IEC 15938-6:04 (R2019)

Information Technology - Multimedia Content Description Interface - Part 6: Reference Software

5/2/2019


CAN/CSA-ISO/IEC TR 15942:04 (R2019)

Information Technology - Programming Languages - Guide for the Use of the Ada Programming Language in High Integrity Systems

5/2/2019

Communications / CAN/CSA-ISO/IEC Information Technology - Telecommunications and Information 5/2/2019



Information 15991:04 (R2019) Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows -CallPriority Interruption and Call Priority Interruption ProtectionSupplementary Services



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Call Priority Interruptionand Call Priority Interruption Protection Supplementary Services

5/2/2019



Information Technology - International Symbology Specification -MaxiCode

5/2/2019



Information Technology - Mixed Raster Content 5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Mapping Functions for the Employment of a Circuit Mode Basic Service and the Supplementary Service User-to-User Signalling as aPair of On-Demand Inter-PINX Connections

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Mapping Functions for the Employment of 64 kbit/s Circuit Mode Connections with 16 kbit/s Sub Mutiplexing

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Mapping Functions for the Employment of 64 kbit/s CircuitMode Connections with 8 kbit/s Sub-Multiplexing

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows -Private User Mobility (PUM) - Registration Supplementary Service

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Registration Supplementary Service

5/2/2019





Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows -Private User Mobility (PUM) - Call Handling Additional NetworkFeatures

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Inter-Exchange Signalling Protocol - Private User Mobility (PUM) - Call Handling Additional Network Features

5/2/2019



Information Technology - Message Handling Systems (MHS) -Interworking with Internet E-Mail'

5/2/2019



Information Technology - Icon Symbols and Functions for World Wide Web Browser Toolbars

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Glossary of Definitions andTerminology for Computer Supported TelecommunicationsApplications

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Using ECMA-323 (CSTA XML) in aVoice Browser Environment

5/2/2019



Information Technology - Document Description and Processing Languages - DSSSL Library for Complex Compositions

5/2/2019


CAN/CSA-ISO/IEC TR 20943-1:04 (R2019)

Information Technology - Procedures for Achieving Metadata Registry (MDR) Content Consistency - Part 1: Data Elements

5/2/2019



Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Mapping Functions for the Tunnelling of QSIG Through IP Networks

5/2/2019



Information Technology - Coded Graphic Character Set for Text Communication - Latin Alphabet

5/1/2019



Identification cards -- Physical characteristics 5/1/2019


CAN/CSA-ISO/IEC-8613-1-95 (R2019)

Information Technology - Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles

5/1/2019


CAN/CSA-ISO/IEC-8613-4-95 (R2019)

Information Technology - Open Document Architecture (ODA) and Interchange Format: Document Profile

5/1/2019




CAN/CSA-ISO/IEC 8613-5-95 (R2019)

Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format

5/1/2019


CAN/CSA-ISO/IEC-8613-6-96 (R2019)

Information Technology - Open Document Architecture (ODA) and Interchange Format: Character Content Architectures

5/1/2019


CAN/CSA-ISO/IEC-9314-5-96 (R2019)

Information Technology - Fibre Distributed Data Interface (FDDI) -Part 5: Hybrid Ring Control (HRC)

5/1/2019


CAN/CSA-ISO/IEC 9314-20:04 (R2019)

Information Technology - Fibre Distributed Data Interface (FDDI) -Part 20: Abstract Test Suite for FDDI Physical Medium Dependent Conformance Testing (PMD ATS)

5/1/2019


CAN/CSA-ISO/IEC 9314-21:04 (R2019)

Information Technology - Fibre Distributed Data Interface (FDDI) -Part 21: Abstract Test Suite for FDDI Physical Layer Protocol Conformance Testing (PHY ATS)

5/1/2019


CAN/CSA-ISO/IEC 9314-26:04 (R2019)

Information Technology - Fibre Distributed Data Interface (FDDI) -Part 26: Media Access Control Conformance Testing (MAC-ATS)

5/1/2019



CHILL - The ITU-T Programming Language 5/1/2019


CAN/CSA-ISO/IEC 10026-3-:00 (R2019)

Information Technology - Open Systems Interconnection -Distributed Transaction Processing - Part 3: Protocol Specification

5/1/2019



Information Technology - Reference Model of Data Management 5/1/2019


CAN/CSA-ISO/IEC 10514-1-00 (R2019)

Information Technology - Programming Languages - Part 1: Modula- 2, Base Language

5/1/2019

Electrical / Electronics CAN/CSA-C309-M90(R2019)

Performance Requirements for Glass-Lined Storage Tanks for Household Hot Water Service

4/30/2019

Electrical / Electronics CAN/CSA-CEI/IEC 61000-4-34:06 (R2019)

ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-34:TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS FOR EQUIPMENT WITH INPUT CURRENT MORE THAN 16 A PER PHASE

4/30/2019

Energy O141-05 (R2019) Softwood Lumber 4/26/2019

Energy O112.9-10 (R2019) Evaluation of Adhesives for Structural Wood Products (Exterior Exposure)

4/26/2019

Electrical / Electronics CAN/CSA-C61000-3-3:14 (R2019)

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-

4/26/2019



voltage supply systems, for equipment with rated current <=16 A per phase and not subject to conditional connection

Electrical / Electronics CAN/CSA-C61000-3-14:15 (R2019)

Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems

4/26/2019

Electrical / Electronics CAN/CSA-CEI/IEC 61000-4-27-01 (R2019)

ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-27:TESTING AND MEASUREMENT TECHNIQUES - UNBALANCE IMMUNITY TEST

4/26/2019


CAN/CSA-A371-14(R2019)

Masonry construction for buildings 4/25/2019

Energy P.12-14 (R2019) Standard for energy performance compliance, verification, and ratings of fuel-burning appliances and equipment

4/25/2019

Energy B836-14 (R2019) Storage, handling, and dispensing of aviation fuels at aerodromes 4/25/2019

Life Sciences Z262.6-14 (R2019) Specifications for facially featured headforms 4/24/2019

Electrical / Electronics C22.2 NO. 100-14 (R2019)

Motors and generators 4/5/2019

Electrical / Electronics C22.2 NO. 115-14(R2019)

Meter-mounting devices 4/5/2019

Life Sciences CSA ISO 5362:14 (R2019)

Anaesthetic reservoir bags 4/3/2019

Life Sciences CSA ISO 10079-2:14 (R2019)

Medical suction equipment - Part 2: Manually powered suctionequipment

4/3/2019

Life Sciences CSA ISO 10079-3:14 (R2019)

Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source

4/3/2019


Anaesthetic and respiratory equipment --Supralaryngeal airways and connectors

4/3/2019

Life Sciences CSA ISO 16628:14(R2019)

Tracheobronchial tubes - Sizing and marking 4/3/2019


Anaesthetic and respiratory equipment - Nebulizing systems andcomponents

4/3/2019

Life Sciences CSA Z23328-1-04 (R2019)

Breathing system filters for anaesthetic and respiratory use -- Part 1: Salt test method to assess filtration performance

4/3/2019



Energy N292.3-14 (R2019) Management of low- and intermediate-level radioactive waste 3/28/2019


S16-14 (R2019) Design of steel structures 3/28/2019

Electrical / Electronics CAN/CSA-C22.2 NO. 60335-2-52:14 (R2019)

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES -SAFETY - PART 2-52: PARTICULAR REQUIREMENTS FOR ORAL HYGIENE APPLIANCES

3/15/2019

Electrical / Electronics CAN/CSA-C61400-1:14 (R2019)

Wind turbines - Part 1: Design requirements 3/13/2019

Gas Equipment ANSI NGV 3.1-2014 (R2019)/CSA 12.3-2014(R2019)

FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES

3/13/2019

Energy N288.1-14 (R2019) Guidelines for calculating derived release limits for radioactive material in airborne and liquid effluents for normal operation of nuclear facilities

3/13/2019

Energy CAN/CSA-ISO 19901-7:14 (R2019)

Petroleum And Natural Gas Industries - Specific Requirements For Offshore Structures - Part 7: Stationkeeping Systems ForFloating Offshore Strucures And Mobile Offshore Units

3/13/2019

Electrical / Electronics CAN/CSA-C68.1-92(R2019)

Specifications for Impregnated Paper-Insulated Metallic-Sheathed Cable, Solid Type

3/5/2019

Electrical / Electronics CAN/CSA-C813.1-14(R2019)

Performance test method for uninterruptible power supplies 3/5/2019


CAN/CSA-ISO 1831:14(R2019)

Printing specifications for optical character recognition 3/5/2019


CAN/CSA-ISO 9241-20:14 (R2019)

Ergonomics of human-system interaction - Part 20: Accessibility guidelines for information/communication technology (ICT)equipment and services

3/5/2019


CAN/CSA-ISO 9241-171:14 (R2019)

Ergonomics of human-system interaction - Part 171: Guidance on software accessibility

3/5/2019


CAN/CSA-ISO/IEC 10918-1:14 (R2019)

Information technology -Digital compression and coding of continuous-tone still images: Requirements and guidelines

3/5/2019


CAN/CSA-ISO/IEC 10967-1:14 (R2019)

Information technology -Language independent arithmetic - Part 1: Integer and floating point arithmetic

3/5/2019


CAN/CSA-ISO/IEC 11694-1:14 (R2019)

Identification cards -Optical memory cards -Linear recording method -Part 1: Physical characteristics

3/5/2019




CAN/CSA-ISO/IEC 11694-2:14 (R2019)

Identification cards -Optical memory cards Part 2: Dimensions and location of the accessible optical area

3/5/2019


CAN/CSA-ISO/IEC 13066-1:14 (R2019)

Information technology -Interoperability with assistive technology (AT) -Part 1: Requirements and recommendations forinteroperability

3/5/2019


CAN/CSA-ISO/IEC 14143-6:14 (R2019)

Information technology -Software measurement -Functional size measurement - Part 6: Guide for use of ISO/IEC 14143 series and related international standards

3/5/2019



Information technology -Telecommunications and information exchange between systems -Services for computer supportedtelecommunications applications (CSTA) phase III

3/5/2019



Information technology -Telecommunications and information exchange between systems - XML schema definitions for computer supported telecommunications applications (CSTA) phase III

3/5/2019



Information technology -Guidelines, methodology and reference criteria for cultural and linguistic adaptability in informationtechnology products

3/5/2019



Information technology -Automatic identification and data capture techniques - Effects of gloss and low substrate opacity on reading of bar code symbols

3/5/2019



Information technology -Radio frequency identification for item management -Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers andimplantable cardioverter defibrillators

3/5/2019


CAN/CSA-ISO/IEC/IEEE 21450:14 (R2019)

Information technology -Smart transducer interface for sensors and actuators -Common functions, communication protocols, andtransducer electronic data sheet (TEDS) formats

3/5/2019



Information technology -Radio frequency identification for item management - Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions

3/5/2019



Information technology -Automatic identification and data capture techniques - Guidelines for direct part marking (DPM)

3/5/2019



Information technology -Automatic identification and data capture techniques - GS1 databar bar code symbology specification

3/5/2019

Communications / CAN/CSA-ISO/IEC TR Information technology -Radio frequency identification for item 3/5/2019



Information 24729-1:14 (R2019) management -Implementation guidelines - Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C



Information technology -Radio frequency identification for item management -Implementation guidelines - Part 2: Recycling and RFID tags

3/5/2019



Information technology -Radio frequency identification for item management -Implementation guidelines - Part 3: Implementation and operation of UHF RFID Interrogator systems in logisticsapplications

3/5/2019



Information technology -Radio frequency identification for item management -Implementation guidelines - Part 4: Tag data security

3/5/2019


CAN/CSA-ISO/IEC 24730-5:14 (R2019)

Information technology -Real-time locating systems (RTLS) - Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface

3/5/2019


CAN/CSA-ISO/IEC 24730-22:14 (R2019)

Information technology -Real-time locating systems (RTLS) - Part 22: Direct sequence spread spectrum (DSSS) 2,4 GHz airinterface protocol: Transmitters operating with multiple spread codes and employing a QPSK data encoding and walsh offset QPSK

3/5/2019



Information technology -Real-time locating system (RTLS) device performance test methods - Test methods for air interfacecommunication at 2,4 GHz

3/5/2019



Information technology -Automatic identification and data capture techniques - Aztec code bar code symbology specification

3/5/2019


CAN/CSA-ISO/IEC 24791-1:14 (R2019)

Information technology -Radio frequency identification (RFID) for item management -Software system infrastructure - Part 1: Architecture

3/5/2019


CAN/CSA-ISO/IEC 24791-2:14 (R2019)

Information technology -Radio frequency identification (RFID) for item management -Software system infrastructure - Part 2: Data management

3/5/2019


CAN/CSA-ISO/IEC 24791-5:14 (R2019)

Information technology -Radio frequency identification (RFID) for item management -Software system infrastructure Part 5: Device interface

3/5/2019



Technologies de l'information - Identification de radio fréquence (RFID) pour la gestion d'élément -Infrastructure de systèmes logiciels Partie 5: Interface de dispositif

3/5/2019





Information technology -User interfaces -Accessibility of personal computer hardware

3/5/2019



Information technology -Automatic identification and data capture techniques - Air interface specification for Mobile RFIDinterrogators

3/5/2019



Information technology -W3C web content accessibility guidelines (WCAG) 2.0

3/5/2019


CAN/CSA-G401-14(R2019)

Corrugated steel pipe products 3/4/2019

Energy CAN/CSA-B837-14(R2019)

Collapsible fabric storage tanks (bladders) 2/28/2019

Electrical / Electronics CAN/CSA-C22.2 NO. 60601-1:14 (R2108)

Medical electrical equipment - Part 1: General requirements for basic safety andessential performance

2/28/2019


Airport series lighting cables 2/28/2019

Life Sciences Z98-14 (R2019) Passenger ropeways and passenger conveyors 2/28/2019

Life Sciences Z386-14 (R2019) Safe use of lasers in health care 2/28/2019

Electrical / Electronics ANSI Z21.20/CAN/CSA-C22.2 NO. 60730-2-5-14(R2019)

AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-5:PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL BURNER CONTROL SYSTEMS

2/26/2019

Electrical / Electronics N287.3-14 (R2019) Design requirements for concrete containment structures for nuclear power plants

2/26/2019


Electric irons 2/26/2019

Electrical / Electronics C22.2 NO. 129-10(R2019)

Neutral-supported cables 2/26/2019


B51-14 (R2019) Boiler Pressure Vessel and Pressure Piping Code 2/26/2019

Life Sciences Q830-03 (R2019) Model Code for the Protection of Personal Information 2/26/2019

Energy N287.1-14 (R2019) GENERAL REQUIREMENTS FOR CONCRETE CONTAINMENTSTRUCTURES FOR NUCLEAR POWER PLANTS

2/20/2019

Electrical / Electronics C22.2 NO. 76-14 Splitters 2/15/2019



(R2019)

Electrical / Electronics CAN/CSA-E60335-2-11:13 (R2019)

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers

2/8/2019


Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

2/8/2019


AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-15: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL AIR FLOW WATER FLOW AND WATER LEVEL SENSING CONTROLS

2/8/2019

Energy P.5-09 (R2019) TEST METHOD FOR MEASURING PER-CYCLE ENERGY CONSUMPTION, ENERGY FACTOR, AND LOW POWER MODE ENERGY CONSUMPTION OF RESIDENTIAL GAS CLOTHESDRYER

2/7/2019

Energy P.6-09 (R2019) TESTING METHOD FOR MEASURING THERMAL EFFICIENCY OF GAS-FIRED POOL HEATERS

2/7/2019

Energy CAN/CSA-P.8-09(R2019)

THERMAL EFFICIENCIES OF INDUSTRIAL AND COMMERCIALGAS-FIRED PACKAGE FURNACES

2/7/2019

Withdrawals

The standards listed in this section have been withdrawn. Most withdrawn standards are available from our archived collection. Program Standard Title Date Posted ScopeElectrical / Electronics C22.2 NO. 142-M1987

(R2014) Process control equipment 4/24/2019

Quality / Business Management

Q31001-11 (R2015) IMPLEMENTATION GUIDE TO CAN/CSA-ISO 31000, RISKMANAGEMENT - PRINCIPLES AND GUIDELINES

2/28/2019

Life Sciences Z731-03 (R2014) EMERGENCY PREPAREDNESS AND RESPONSE 2/28/2019

Current List of Endorsed Standards

Current List of Endorsed Standards View Detail



CSA Store | CSA Group Corporate

Copyright © 2018 CSA Group. All Rights Reserved.

Formal Interpretations

This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate committee. View Detail

Informs & Certification Notices

This section lists notices that are published by Certification and Testing. An Informs Notice contains information only. A Certification Notice announces changes that may affect product certification. Please allow time for page to load. View Detail



new publications program standard title date posted scope · 2019-05-04 · energy csa exp07:19...

Documents