new york state - nyseta
TRANSCRIPT
NEW YORK STATE
ENGINEERING TECHNOLOGY ASSOCIATION PO Box 7203, Garden City, NY 11530-7203
WWW.NYSETA.ORG
Spring 2013 NEWSLETTER Editor: Jayne Baran
SUNY Institute of Technology
In This Issue:
About the Coming Fall 2008 Conference at
the Rochester Institute of Technology..Page 1
About the Spring 2008 Conference at Fulton-
Montgomery Community College........Page 4
About the Spring 2013 Conference…...Page 2
Recap of Fall 2012 Conference.............Page 5
Letter from the President………….….Page 7
Letter from the Vice President………..Page 9
NYSETA Student Scholarship..............Page 10
News from around the State................Page 11
Institutional Representatives...............Page 21
NYSETA
Spring 2013 Conference at
Fulton Montgomery CC April 18
& 19, 2013
Officers
President
John Campbell, Cayuga CC, W: 315.255.1792 (x2240),
Fax: 315.225.2117 Email: [email protected] Vice President
John Stratton, RIT, Email: [email protected] Secretary & Newsletter Editor
Jayne Baran, SUNYIT, W: 315.792.7542, Fax: 315.792.7800, E-mail: [email protected] Treasurer
Kathleen Gallagher, Nassau CC, W: 516.572.7272
Fax: 516.572.7471 Email: [email protected] Website Editor
Anthony Hotchkiss, Buffalo State College. W: 716.878.6130
Email: [email protected]
Members at Large
-Ed Tezak, Alfred State College, W: 607.587.4661, Fax: 607.587.4615
Email: [email protected] -Anthony Hotchkiss, Buffalo State College, W: 716.878.6130 Email: [email protected] -Michael J. Loudis, Morrisville State College, W: 315.684.6282,
Email: [email protected] -Jon Balke, Corning CC, E-Mail: [email protected]
-Mark Voisinet, Niagara County CC, E-Mail: [email protected]
Chairman, Awards Committee
John Longwell, Corrning CC, Email: [email protected] Representing the Council for Engineering Technology
Jim Lydon, Erie CC, [email protected]
Interest Group Leaders
Civil/Construction/Architectural
Marguerite Newton, Niagara County C.C. W: 716.614.6854;
Email: [email protected] or [email protected]
Electrical
Steve Ciccarelli, RIT, W: 585.475.7101 Email: [email protected] Mechanical
Slade Gellin, Buffalo State College, W: 716.878.6002,
Email: [email protected] Cyber Security and Infrastructure
Michael Stanko, RIT, [email protected]
Alicia McNett, Corning CC, [email protected]
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 2 -
About the Spring 2013 Conference at Fulton Montgomery Community College
-
-
.
-
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 3 -
The Spring 2013 Conference at Fulton Montgomery Community College-continued
-
Adaptation to
change and building resilience in the Mohawk
Watershed: Engineering challenges in an
important time of change “
Architectural & Civil Technology:
–
Mechanical Engineering Technology:
Electrical Engineering Technology: “Integrating Hardware and Software In Project
Based Learning”
Prof. Mike Metaxas, Queensboro Community College
“Introducing Concepts in Electronics and Pro-gramming Using Wearable Technology.”
Computer Information Systems:
The networking hour and banquet will take place at the Johnstown Holiday Inn. There will be an after-dinner presentation TBA.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 4 -
The Spring 2013 Conference at Fulton Montgomery Community College-continued
- - -
- - -
-
-
- -
- -
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 5 -
Recap of the Fall 2012 Conference at RIT Another great conference at RIT! The NYSETA
membership and executive committee would like
to thank James Mallory, Steven Ciccarelli and
John Stratton, as well as the rest of the RIT
community that made the conference a great suc-
cess.
We are also grateful to our conference exhibitors:
Allegheny Educational Systems Inc., Allied
Electronics, Armfield Incorporated, CADimen-
sions, Inc., Empire Technical Training Systems,
Goodheart-Willcox Publishing, Hi Tech, Indus-
trial Press Inc, Intelitek, McGraw-Hill, and Per-
kin Elmer.
Plenary and Interest Group Presentations
Mr. Kevin Parker from the FBI was the plenary
speaker. His presentation was “The Cyber
Espionage Threat”.
Following the plenary session, four tracks of
sessions were presented. Those marked with an
asterisk were eligible for PDH credits.
–
–
–
–
- -
–
–
–
-
–
–
-
-
- -
–
–
–
The Evening Banquet and Networking Hour
The evening banquet was held at the Radisson
Inn Ballroom. The first guest speaker was Dr.
Gerard J. Buckley, NTID President and RIT Vice
President and Dean. Dr. Buckley discussed the
history and role of NTID (National Technical
Institute for the Deaf at Rochester Institute of
Technology).
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 6 -
Recap of the Fall 2012 Conference at RIT-Continued
The second guest speaker was Tina Chapman.
Tina is presently a Senior Lecturer in the College
of Liberal Arts, Fine Arts Department at RIT.
Her research interests are storytelling and using
creative nonfiction to teach technical subjects.
Her dramatic reading of a student’s story will all
help us remember the roles of hubs, switches and
routers.
Attendees
We were delighted to have the following
indviduals in attendance:
Ed Tezak Alfred State College
Joy Carlson Alfred State College
James Boardman Alfred State College
Nawaz Khan Alfred State College
Timothy Cochran Alfred State College
Jeff Marshall Alfred State College
James Antonkos Broome Community College
Elizabeth Prescod Bryant-Stratton
Tony Hotchkiss Buffalo State College
Slade Gellin Buffalo State College
Ilya Grinberg Buffalo State College
John Campbell Cayuga Community College
Christie Waters Cayuga Community College
Jon Balke Corning Community College
Brad Cole Corning Community College
Shohrah Moini Erie Community College
Dariush Zadeh Erie Community College
James Lydon Erie Community College
Adam Filios Farmingdale State College
John Kohn Fulton-Montgomery CC
Michael Weaver Johnstown
Mark Oliver Monroe CC
Michael Loudis Morrisville State
Kathleen Gallagher Nassau Community College
Fred Schoenfeld Nassau Community College
Mark Voisinet Niagara County Community College
Marguerite Newton Niagara County CC
Frank Boeck Niagara County CC
Don Voisinet Niagara County CC
Gerald Berent NTID
Ila Parasnis NTID
Melanie Villatoro NYC College of Technology
Merlindo Drini Queensborough CC
Mike Metaxas Queensborough CC
George VanArsdale Retired
Dianne Bill RIT
James Hurney RIT
Michael Eastman RIT
Miguel Bazdresch RIT
Todd Schueckler RIT
Antonio Mondragon RIT
John Stratton RIT
William Leonard RIT
Michael Parthum RIT
Rob Garrick RIT
Carl Lundgren RIT
Elizabeth Dell RIT
Ti Lin Lui RIT
Dave Krispinsky RIT
Will Dannels RIT
Edward Schwenzer RIT
Dino Laury RIT
Donna McGowan RIT
Sidney McQuay RIT
Dominic Peroni RIT
Vicky Robinson RIT
Peter Lalley RIT
Maureen Valentine RIT
Vincent Samar RIT
Bill Stackpole RIT
Steven Ciccarelli RIT
David Baker RIT Retired
Carol Richardson RIT Retired
Lou Gennaro RIT Retired
Tao Eng RIT/NTID
James Mallory RIT/NTID
Joe Stanislow RIT/NTID
Tom Simpson RIT/NTID
Mark Jeremy RIT/NTID
David Lawrence RIT/NTID
Werner Zorn RIT/NTID
Raja Kushalnargar RITNTID
Drew Maywar RIT
Jeanne Christman RIT
Kathleen Alhart RIT
Clark Hochgraf RIT
Elaine Merenda Suffolk CCC
Mohamed Rezk SUNYIT
Jayne Baran SUNYIT
Bill Kleitz Tompkins-Cortland CC
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 7 -
Recap of the Fall 2012 Conference at RIT-Continued
The Friday Morning Business Meeting
The breakfast business meeting on Friday
morning was held at the Raddison hotel. The
business meeting was called to order at 8:55 am
by President John Campbell. John thanked RIT
for hosting the conference, and commented on
the conference format (peer-reviewed papers and
PDH credits; addition of computer interest
group)
Minutes of the spring 2012 business meeting
were approved.
The at-large members are up for election next
spring 2013. Any nominations for at-large
members and for the “Elliot” award should be
sent to John; contact information for “Elliot
Award” nominees and a summary of
accomplishments should also be sent.
Vice-President John Stratton noted the following
schedule for future conferences and asked
everyone to consider hosting. The executive
committee is willing to help.
Spring 2013 Fulton Montgomery CC (April
18th
-19th
)
Fall 2013 Alfred State
Spring 2014 Excelsior
Tony Hotchkiss updates the NYSETA webpage.
Jayne Baran updates the listserv’s. Updates to
the mailing list can be sent to Kathleen
Gallagher.
Jayne Baran reported for treasurer Kathleen
Gallagher on current budget numbers. We
currently have $15,413.66. Dues notices will be
mailed later this fall. We are also collecting
membership dues along with the conference
registration fees.
Jayne Baran will be producing the NYSETA
newsletter. Newsletter articles will be due
February 1st, 2013 for the spring 2013 newsletter.
An e-mail reminder will be sent.
Steve Ciccarelli (Electrical), Slade Gellin
(Mechanical) and Marguerite Newton
(Civil/Architectural) summarized the interest
group sessions. See attached documents for the
electrical and mechanical interest group minutes.
John Longwell, is the scholarship chair. An e-
mail will be sent out with information in the
spring.
We have formed a new interest group on cyber
security and infrastructure. Michael Stanko
(RIT) and Alicia McNett (Corning CC) have
agreed to be co-chairs.
A committee was formed to document
NYSETA’s history.
The meeting was adjourned at 10:05 am for tours
to RIT’s NTID Electric Bike program and new
LEED-certified building.
A Letter from the President, John Campbell The Fall 2012 conference was held at RIT. It was
ground breaking with a new Computer interest
group called the Cyber Security and
Infrastructure (CSI) interest group.
At the conference it was the first time we had
poster boards from faculty, organizations, and
students. This was also the first time we accepted
refereed papers for the interest group sessions.
They will be archived for future reference on our
website.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 8 -
A Letter from the President, John Campbell-Continued
This effort at RIT turned the NYSETA
conferences into something spectacular. For
future conferences at the smaller colleges and
mostly community colleges we do not have to
live up to the level that RIT set.
I want to thank Jim Mallory for chairing the RIT
Conference. Thanks to John Stratton for being
an incredible source of direction for our
organization. I want to thank the entire RIT
community for an excellent effort making this
conference and our organization more
professional. The standard was set real high at
this conference.
Those of you that missed the tour on Friday, you
missed a great opportunity to ride the electric
bikes produced by an innovative student project.
It was fun riding the bikes around campus and
very informational outlining the student’s
designing, manufacturing, and assembling
rechargeable battery operated bikes used by
students to go across campus.
I want to thank Jim Mallory for the in-depth tour
of the NTID campus and laboratory facilities.
John and Jim keep raising the bar on the
direction for our organization. As Jim Mallory so
eloquently stated “It’s on the WEB”. Please
remember if you are hosting a conference in the
future the effort made at RIT would be hard if
not impossible for the smaller colleges to
duplicate. We would not expect that level. It
takes a village!!!
The Interest Group Chairperson positions are up
for re-election at the spring 2013 Conference.
The term of the office is two years. The election
is held during the Spring Conference of the odd
years (This year is 2013). The new officers take
over right after the spring conference ends.
Voting is secret ballot with a majority of votes
cast determining the election. I will also ask if
the Interest Group Chairperson wants to continue
to serve. The Interest group chairs are voted in
during the interest group business meetings on
Thursday afternoon.
The (5) At Large Members are up for election, I
will take nominations via email. The (5)
members-at large shall be elected by the
members present at the spring business meeting
Friday morning. They shall be elected for a
period of 2 years and their election shall take
place at the annual spring meeting of the odd
number of years. Voting shall be secret ballot.
The 50th anniversary of NYSETA will be
celebrated at the Fall 2013 Conference at Alfred
State. We formed a history committee that is
made up of members that had a hand in our
organization’s history. The committee members
include: Don Voisinet, Elliot Colchamiro, Robert
Moore, Peter Pawlik, and Roger Lehman. They
are working on documenting the history of
NYSETA. We will have some deliverables from
the committee that will be posted on our website.
If you have any digital photos of our history that
you would like to share please email them to me
at [email protected] and I will forward
them to the committee. Please check your emails
for more information about our upcoming history
activities.
I would like to thank Tony Hotchkiss for the
excellent work setting up the new NYSETA.org
website that is loaded on Go-Daddy. Please visit
it often for conference updates.
I am looking forward to the next conference at
Fulton Montgomery on April 18th and 19th,
2013. I hope to see everyone this spring.
Sincerely,
John Campbell
President NYSETA
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 9 -
A Letter from the Vice President, John Stratton
Many thanks to all of those who helped us put on
a conference in a new format at RIT during the
fall of 2012. We had refereed paper
presentations, poster sessions by faculty and
students, a few invited speakers, and many
interesting and diverse speakers. Formal papers
will be posted for six years on our web site.
Several sessions had PDH’s for Professional
Engineers to allow them to keep their PE license
current.
The plenary speaker was an FBI agent who
presented the topic of security. The first dinner
speaker was the Dean of the National Technical
Institute for the Deaf (NTID) reviewing NTID’s
history and role in educating the deaf technical
workforce. The second speaker was a professor
who taught in both the Liberal Arts and
Information Technology field. She discussed the
use of storytelling to convey technical content.
We had 86 paid attendees, 10 exhibitors and
several volunteers as well as a number of other
students and casual visitors who visited the
exhibits but did not register for the conference.
The conference earned a net profit of $ 2,400 for
the NYSETA. The web site used was constantly
updated and reflected all activities and papers
from the conference.
A special part of the Fall 2012 conference was
the birth of a new interest group named the
Computer and Information Security interest
group. This fourth interest group will
complement the NYSETA in the future with the
ever changing technology. Jim Mallory
spearheaded this group and was the interim
interest group chair until we got it off the
ground. Now the new interest group chairs are
Michael Stanko from NTID and Alicia McNett
from Corning Community College. There were
also discussions of changing the name of
NYSETA to the New York Security and
Engineering Technology Association so that it
better represents the new membership that we
hope to attract. The web site will need to be
edited in the future to reflect activities in the new
interest group, not just Engineering Technology.
The bar has been raised. The hope is that by
including scholarship in the form of formal, peer
reviewed papers and journals we will attract
younger faculty who seek these activities
towards promotion in their college. By adding
the new CIS interest group we hope to diversify
and grow the NYSETA membership base and
participation at our conferences.
VP Report – Other Business
We look forward to the Spring 2013 conference
at Fulton-Montgomery Community College.
Details will be provided by Rich Prestopnik.
Also remember that we will be going to Alfred
State College in Fall 2013 and Excelsior College
and Spring 2014!
We still need colleges to volunteer for Fall 2014
and beyond.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 10 -
New York State Engineering Technology Association 2013 Student Scholarship Nomination A faculty member or division chair may nominate a student who has demonstrated talent and/or leader-
ship in the areas of Campus Service, Student Activities and/or Outstanding Scholarship as they pertain to
technology. Financial need is not a basis for nominations. No more than one student may be nominated
from each student organization. Each college may nominate no more than three (3) candidates per year.
The scholarship nomination form can be found at www.nyseta.org/documents
Completed applications should be returned to:
John Longwell (e-mail preferable, [email protected])
Corning Community College
One Academic Drive
Corning, NY 14830
Applications must be received by April 12, 2013.
NYSETA Listservs Please consider subscribing to our listservs:
[email protected] for the civil interest group.
[email protected] for the electrical interest group.
[email protected] for the mechanical interest group.
[email protected] for all NYSETA members
To become a subscriber email Jayne Baran at [email protected] with your email address.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 11 -
News from around the State-----------------------------------------------------
Mohawk Valley Community College (provided by Bryan Alguire)
New Dean—Sayed Akhavi
MVCC recently named Seyed Akhavi to the position of Dean of the Center for Mathematics, Engineering,
Physical Sciences, and Applied Technology. He holds a Master in Science and a Bachelor in Engineering
in electrical engineering from Youngstown State University in Youngstown,Ohio, and currently is
completing his PhD degree in Leadership for Higher Education at Capella University.
Akhavi has held several positions in the private sector, most notably as President of MicroNet
International, Inc., an Ohio based company that provided engineering and computer networking services
to local and international companies.
He has also held the position of Dean, Information and Engineering Technologies at Eastern Gateway
Community College, formerly known as Jefferson Community College, and most recently, Dean of
Technology - Engineering and Information Technologies Division of the Technical Career Institutes in
Manhattan.
MVCC gets Green with Solar Panels
With the College working on becoming a “Green” environmental steward, the STEM Center has taken
major strides toward offering renewable resources programs over the past year. The first major project
was completed in spring 2012 when 16 solar panels were installed on the Science and Technology
Building. “We built the array basically to support our students who will be installing complete systems in
the future,” said Professor Robert Decker, Director of Engineering Technologies. “Through doing so and
completing the grid intertie agreement with National Grid, we have also learned about the application
process for projects such as these. This also helps us to explain to our students what is required based on
firsthand knowledge.”
The photovoltaic (PV) solar panels are made by Sanyo and produce around 3,500 watts of electrical
power. That size array can produce enough energy to cut a typical homeowner’s electric bill by 40- 50
percent on an annual basis. The solar cells in these panels are manufactured in the United States and then
the panels are assembled in Mexico. The panels generate Direct Current (DC) power that connects to an
inverter that converts the electricity in to Alternating Current (AC) for home use. DC is useful for items
which operate on batteries while the electricity provided by the nation’s power grid is AC.
With the installation of these solar panels at the College and other lab acquisitions funded by NYSERDA
through the SUNYGREENSNY grant and by the US. Department of Energy through Solar Instructor
Training Network, MVCC was able to offer ET167 – Introduction to Photovoltaics this past summer and
to develop and offer the non-credit Intro to Photovoltaic Systems through CCED. Students completing
either of these courses are eligible to take the North American Board of Certified Energy Providers
(NABCEP) Photovoltaic Entry Level Exam, which is a nationally recognized preparatory step for
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 12 -
Mohawk Valley Community College – continued
individuals interested in entering the solar energy field. As a learning tool, the College will use the system
for both credit and non-credit courses while also hosting workshops on solar power for industry. The
College has six lab stations in its Wiring and Codes lab that can be used to provide hands-on experience
with real-world system components.
“We are looking toward to having workshops and awareness sessions in the future to show people the
benefits of having such a system installed in a household,” said Decker, who was instrumental in this
project. “Students will be able to actually build and connect a complete solar system which is tied to the
grid. We are partnering with several colleges statewide in developing these programs.” The College’s
solar panels are tied into the building system of the S&T Building. During the daytime hours and
weekends when the system is not in use for training, the power generated by the panels is fed back
through the power grid – ‘turning the College’s power meter backwards’ and cutting down the energy bill
for MVCC.
As for the effectiveness of the solar panels, cloudy weather can cut the power production by 50 percent or
more compared to a sunny day, but these systems are measured on an annual energy production. Solar
energy system design takes into account the number of peak sun hours per day that range on average
anywhere from 2½ hours during winter months to five hours in June and July in this area. To maximize
energy production over the entire year, the MVCC solar array is tilted at about a 45 degree angle,
corresponding to Utica’s latitude, and also causing the snow to slide off the smooth glass surface in the
winter. The panels point to the South to follow the path of the sun.
SUNY Buffalo State (provided by Slade Gellin)
The new name for Buffalo State is SUNY Buffalo State
The new technology building will be occupied this summer.
Ilya Grinberg (EET Smart Grid) won a President's Award for Outstanding Scholarship and Creativity.
Misc: With the departure of Fashion Technology, the department name is now officially the Department
of Engineering Technology.
Personal Note from NYSETA Former President Maria Hull (provided by Maria Hull)
I have retired as of the 4th of January. I have been fighting lung cancer for 3 years and it seems I may be
losing ground a bit. I'm hoping for more time. I miss all my colleagues and friends at ETA. Please tell
them I'm OK at this point and will miss them.
Maria can be reached at 130 Old Siek Rd., Troy, NY 12180 or at "Maria C Hull" [email protected]
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 13 -
ABET Report for NYSETA Winter 2013 Newsletter (provided by Carol Richardson)
Criteria Changes and Updates to Harmonized Criterion 2 and 4
A recent modification in the ABET harmonized criteria will affect the evaluation and assessment
processes required of ABET-accredited program. The ABET Board of Directors directed all four
commissions in October 2012 to revise the harmonized Criterion 2 (Program Education Objectives) and
4 (Continuous Improvement) in the commission’s criteria for 2013-14 to remove the requirement for
assessment and evaluation of the attainment of program educational objectives (PEOs). PEOs still
needed to be reviewed periodically by the program’s constituents. ABET Headquarters is currently
working with institutions to implement this change who were reviewed during the current cycle and
institutions who have interim reports next year. Accreditation alerts are being sent to institutions that are
being reviewed this cycle and institutions that have interim reports due next year. These accreditation
alerts are on the ABET website. This change was strongly supported by the ABET Academic Advisory
Council.
Approval of Recommendation to Change TAC to ETAC
I reported at the fall conference in a presentation that the ABET Board of Directors approved a change to
the name of commission that accredits engineering technology program in March 2012 on the second
reading. The Technology Accreditation Commission has been changed to the Engineering Technology
Accreditation Commission (ETAC). ABET Headquarters has provided institutions who have ABET-
ETAC accredited programs and professional societies information about the name change and have
changed the name of the commission on the ABET website and in the ABET documents. Please notify
ABET headquarters if you find TAC in the documents or on the ABET website.
A new scope statement for ETAC for the Accreditation Policy and Procedure Manual (APPM) was
approved by the ABET Board of Directors in October, 2012. This scope statement is in the latest revision
of the APPM in section II.E. d. Bold type indicates the changes to the scope statement.
II.E.3.d ETAC – Baccalaureate programs accredited by ETAC are those leading to the professional
practice of engineering technology. Associate degree programs prepare graduates for careers as
engineering technicians. ETAC accredits a program at the associate or baccalaureate degree level.
II.E.3.d. (1) ETAC – The name of every ETAC-accredited program that includes the word
“engineering” in the name of the program must also include the word “technology” directly after the
word “engineering.”
Each of the four ABET commissions now has the words “professional practice” in their scope statements.
ETAC was the only commission that did not include these words in their scope statement. The EAC
commission had the phrase “professional practice of engineering” in their scope statement so a different
phrase had to be used for the ETAC scope statement. The professional practice of engineering technology
is defined and discussed in the article Engineering Technology National Forum: An Action Arm of ETC
for ET National Impact published in the fall 2012 issue of Journal of Engineering Technology.
The revision to II.E.3.d (1) allows a program without technology in the name of the program such as
Construction Management to be accredited by ETAC.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 14 -
ABET Report for NYSETA Winter 2013 Newsletter (Continued)
Programs and Information for Institutions
The April 2013 ABET Symposium will be held in Portland, Oregon in April 2013. Presentations and
panel discussions are focused on issues common to all commissions as well as commission-specific
issues. The ETAC-specific sessions provided visit preparation guidance for attendees and encouraged
their feedback about recent and proposed changes in accreditation processes, criteria, and self-study
preparation.
As in the past, the ETAC will invite deans, department chairs, and other institutional representatives to
attend the Institutional Representatives’ Day, held during the Summer Commission Meeting in July. This
session provides opportunities to guide attendees about their upcoming reviews. Commission members sit
with each of the institutional representatives at the meeting to provide personal insights and to answer
questions, and a panel of Executive Committee members advises all participants about accreditation
process issues.
Power Point presentations from the 2012 ABET sponsored sessions at the ABET Symposium and the
Institutional Representatives’ Day are available on the ABET web site which was revised in the fall of
2012. Presentations for the ABET 2013 sessions should be on the website by June, 2013. The ABET
website has the last three versions of the ETAC criteria and the APPM. The Accreditation Alerts for the
PEO criteria changes are also available on the ABET website.
This report was prepared 2/3/2013 by Carol Richardson who is currently the past chair of the Engineering
Technology Commission of ABET. Please contact her at [email protected] if you have questions
about this report.
Alfred State (Provided by Ed Tezak)
After the ABET visit this fall our Dean, John Williams, decided to deactivate the AAS in Mechanical
Design Engineering Technology and the AAS and BS in Electromechanical Engineering Technology. We
are waiting for the ABET findings from October and will be responding soon.
Milt Brown retired this past summer on short notice. We convinced Gerry Vance to come back to help us
out in HVAC for the fall.
We had a successful search for his replacement who arrived just before Christmas. Jon Owejan was a
Senior Research Engineer at the General Motors Electrochemical Energy Research Laboratory, where he
worked from 2004 to 2012. He led electrochemical transport research by coordinating the activities of
researchers at GM, national labs, and universities. The focus of his research is multi-scale transport in
lithium-ion batteries and fuel cells. He has developed several diagnostic techniques for characterizing
transport at various length scales. He has published over 30 papers in peer-reviewed journals and
conference proceedings and has been granted 17 patents. Jon completed his Master of Science degree at
the Rochester Institute of Technology in 2004 and is currently finishing his PhD with the University of
Tennessee at Knoxville.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 15 -
Fulton-Montgomery Community College
Richard J. Prestopnik
FMCC is delighted to host the spring 2013 NYSETA conference on April 18-19, 2013. We look forward
to showing you all the new improvements on campus, including our cleanroom and Mechatronics lab.
A donation of cleanroom “bunny suits” (65 boxes!) in addition to other donations and purchases has the
FMCC cleanroom up and running. In addition to scheduled course labs, we conduct workshops on
cleanrooms and nanotechnology for students and teachers on topics such as cleanroom protocols,
nanotechnology and atomic force microscopes.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 16 -
Picture from Albany Business Review 10/2010.
Jeremy Spraggs began working as the newest FMCC Electrical Technology instructor as of January, 2011.
Jeremy’s background includes work with Control Associates as an Automation Specialist and as the Plant
Engineer for the Top-Flite/Callaway golf ball manufacturing facility in Johnstown. Jeremy has worked on
several NSF projects for FMCC during his tenure in industry.
FMCC’s NSF grant, Technical Education Pathways Partnership (TEPP), started October 1, 2010. The
project has developed a two-year 11th
and 12th
grade Engineering and Technology curriculum for area
school districts. The program is taught at the local BOCES and uses FMCC labs. 15 college credits are
built into the program. The project was instrumental in revamping the Electrical Technology program and
introducing product modules into the curriculum.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 17 -
Erie Community College - Electrical Engineering Technology
by Anthony Dalessio and Elena Brewer
Accreditation
The department received a three year renewal after the Fall 2008 visit. We submitted an interim report for
Fall 2010 and received the final results in September 2011. All outstanding concerns and weaknesses
were resolved and we were granted a 3 year extension. Our next visit will be in the Fall of 2014.
EET Curriculum Revisions
The EET department completely revised the AAS degree program using feedback from ABET, our
industrial advisory board, and data gathered from graduates and other constituents. The Appendix E
document was submitted to SUNY and NYSED in January of 2011. We received SUNY approval in April
2011 and SED approval in January 2012. ABET headquarters approved the changes prior to submission.
The major changes include cutting the total number of credit hours from 72 to 64.5; the elimination of the
survey of calculus course; the elimination of an English literature course; and the addition of college
algebra. Instead of a rigidly defined final semester, the students can now choose three technical elective
courses, and the department has added several new elective courses to meet student and industry
demands.
Grants
The department has been selected for the past three years for a significant share of the college's Carl D.
Perkins CATEA grant. In 2010 academic year the department received approximately $60,000 to upgrade
digital logic trainers and create a new Photovoltaic Systems lecture and laboratory course. For the 2011
academic year the department received approximately $227,000 for additional equipment for the PV
laboratory, two smart classrooms, a new computer laboratory, and new Agilent test equipment for the
electronics laboratory. In the current year we have received approximately $115,000 for a wind turbine
trainer for our new Wind Power course; PLC equipment and training; additional equipment for the PV
laboratory (which has become our most requested technical elective); and feature upgrades for some of
our Agilent test equipment. All of our scopes will be upgraded to mixed signal oscilloscopes, and
arbitrary waveform generation will be added to our function generators.
Anthony Dalessio submitted a proposal to the National Science Foundation's Advanced Technological
Education program in Fall 2011 to infuse information literacy into the EET curriculum. Elena Brewer,
and campus librarians Matthew Best and Katherine Hill, were co-principal investigators on this grant. We
managed to confound the five member review panel, receiving every possible score (one each: poor, fair,
good, very good, and excellent). It wasn't a complete loss as several presentations and papers are under
review that resulted from the grant research and narrative. We also submitted two proposals for the
SUNY Innovative Instructional Technology program in June 2012, neither of which were funded. We're
currently working on a proposal for the SUNY High Needs Program.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 18 -
Erie Community College - Electrical Engineering Technology (Continued)
Publications and Presentations
Elena Brewer presented a paper on professional development at community colleges at the 2011 IAJC-
ASEE International Conference in Hartford, CT in April 2011. The paper was co-authored by Anthony
Dalessio. We would like to thank everyone who participated in the survey we sent out on the NYSETA
listserv in Fall 2010. In addition to being published in the conference proceedings, the paper was also
selected for publication in the Technology Interface International Journal's Spring/Summer 2011 issue.
Elena Brewer and Anthony Dalessio co-authored two papers presented at the ASEE annual conference in
San Antonio, TX in June 2012. One paper related to our PV courses was accepted by the Energy
Conversion and Conservation division, while the other was related to funding professional development
and was accepted by the Continuing Professional Development division. We currently have one paper
accepted for the ASEE Saint Lawrence section meeting in April 2013 on assessing ABET outcomes.
Certificate program in Energy Utility Technology
The Electrical Engineering Technology department applied for a new certificate program in Energy Utility
Technology, which was approved by NYSED in December 2010. This built upon the Overhead Electrical
Lineworker course sequence the department has offered since Fall 2006 (developed with National Grid)
by adding a pair of natural gas courses and a course in geospatial technology. The gas courses were
developed for the Gas Field Operations Technician course sequence developed by the Industrial
Technology department with National Fuel in 2008. National Grid has continued its support of the
program, and donated $25,000 at the grand opening of our climbing facility during the Summer of 2009.
Last summer the department installed a 350 Watt wind turbine to provide power for the facility.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 19 -
Queensborough Community College
Department of Engineering Technology
Merger Between ECET & METDD Departments
The merger between Electrical and Computer Engineering Technology and Mechanical Engineering
Technology & Design Drafting took place during Spring/Summer of 2012. The official department name
is now Engineering Technology, with Professor Stuart Asser as a Chairperson of the department, and Dr.
Belle Birchfield and Professor Nicholas DiZinno as Deputy Chairpersons of the department. The merger
has increased the department’s full time faculty to 22, making one of the largest departments in
Queensborough Community College. The merger will benefit the students with increased classrooms and
laboratory facilities and development of cross- disciplinary courses such as mechatronics and building
facility management.
ABET Accreditation of Engineering Technology Courses
The faculties in ET department have been working diligently to develop the ABET assessment in
preparation for ABET accreditation that will take place during Fall of 2013. The work includes
development of student outcomes and corresponding rubrics for each specific course. Samples of the
student work are included with the rubrics to demonstrate each student’s level of understanding the
subject matter. In addition to rubrics, course portfolio binders for the ABET display material are also
prepared, which includes course outline, samples of students’ homework, tests, laboratory reports,
semester project and presentations.
Electric Go-kart Project
Under the guidance of Dr. Kee Park, the MT club has been designing and fabricating an electric go-kart
project in preparation for possible national competition. The purpose of this project is to design and
fabricate a fuel efficient vehicle using gasoline, electricity or alternative fuel such as hydrogen fuel cells.
QCC has chosen to use electricity as energy source to incorporate green vehicle concept of zero emission.
The vehicle is based on go-kart configuration as many kits are readily available for students to build and
modify as necessary. The design phase will include concept design using CAD software, as well as motor
mount design and battery compartment design. During the assembly phase of the project, students from
IEEE club will participate in motor operation such as connecting the batteries to the motor and installing
speed controller. This project will enable mechanical engineering technology students to learn how to
design concept a vehicle using CAD software as well as design machine elements such as gears, brakes
and structural supports. Joint work with IEEE club will also enable students from different disciplines to
learn about mechanical design and electrical design. Major funding of this project has been provided by
ET Department and QCC.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 20 -
Queensborough Community College (Continued)
Hydrogen Fuel Cell Research
Three honor students from QCC have started an advanced research project involving hydrogen fuel cells.
Kenny Chu, Nahyun Kim and Luis Solares have conducted research into design and fabrication of Proton
Exchange Membrane fuel cells, namely Carbon Nanotube (CNT)-based hydrogen fuel cells. The goal of
this research is to optimize CNT based hydrogen fuel cell efficiency in lieu of the traditional platinum
based hydrogen fuel cell models. The first phase of the research is to manufacture single hydrogen fuel
cell using raw materials and manufacturing process such as cutting, drilling, polishing and CNC
machining. Chemical reaction of the CNTs will be performed using various chemicals such as PDDA
solution and deionized water. First phase of the research will be presented at Columbia Undergraduate
Science Journal's annual Spring Undergraduate Research Symposium in March of 2013 and 2013 QCC
Honors Conference in May. Major funding of this project has been provided by ET Department and QCC.
Future funding will be provided through PSC CUNY Research Grant.
Machine Design - Elective Course in Mechanical Engineering Technology
Kee M. Park & Nicholas DiZinno
This is an elective course offered to students who are in Mechanical Engineering Technology degree
program. The pre-requisites for this course includes Applied Mechanics (Statics) and Strength of
Materials. This course focuses on incorporating fundamental development of concepts with practical
specification of machine components. This course covers the basics of machine design which includes
the design process, review of stress and strain theories, failure prevention under static and variable
loading, and characteristics of the principal types of machine elements. Typical application includes
shafts, permanent and nonpermanent joints, mechanical springs, bearings, gears, clutches, brakes and
flywheels. Students with background and or interest in automotive technology will find this course useful
in terms of designing automotive components using design rules based on fundamental theories, industry
codes and standards.
Students who have completed this course should have an ability to design a system, component, or
process to meet desired needs, an ability to use the techniques, skills, and modern engineering tools
necessary for engineering practice, an ability to apply principles of engineering, basic science, and math
to model, analyze, design and realize physical systems, components or processes.
This course is usually offered to third year Mechanical Engineering major students in four year (senior)
colleges, so offering this course at the community college level will afford students additional transfer
credits when applying to senior colleges.
This course is under review by Queensborough Community College’s curriculum committee and once
approved, QCC will offer this course beginning Fall 2013 or Spring 2014.
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 21 -
NYSETA Institutional Representatives
If you would like to update or take over as IR for your institution send an Email with a statement to that effect to
Jayne Baran, NYSETA Secretary at: W: 315.792.7542, or email: [email protected]
Institution Institutional Representative
Adirondack Community College…………. Diane Dalto
Alfred, SUNY College of Technology......... Ron Nichols
Bronx Community College.................. Nasser Abdellatif
Broome Community College................. James Antonakos
Buffalo State, SUNY College ................. Anthony Hotchkiss
Canton, SUNY College of Technology.... David Hartle
Cayuga Community College.................... John Campbell
Clinton Community College .................... Al Cordes
Corning Community College................... John Longwell
Delhi, SUNY College of Tech................. ?
DeVry Institute of Technology………… Robert Brunson
Dutchess Communuity College............... James Brazee
Erie Community College……................. Anthony Dalessio
Excelsior College………………………. Bob Moore
Farmingdale, SUNY College of Tech..... Jeff Hartman
Finger Lakes Community College……… Marsha Walton
Fulton-Montgomery Community College..... Richard Prestopnik
Herkimer County Community College..... ?
Hudson Valley Community College......... Bill Darling
ITT Technical Institute (Getzville)……… Fran Olgletree
Jamestown Community College................ Charles Rondeau
Mohawk Valley Community College......... Bryan Alguire
Monroe County Community College.......... Mark Oliver
Morrisville State College………………… Ms. Christine Cring
Nassau County Community College........... Fred Schoenfeld
New York City Technical College............. Gerada Shields
Niagara County Community College......... Charles Fowle
Onondaga County Community College..... John Lyon
Orange County Community College.......... Arlin Bartlett
Queensborough Community College......... Stuart Asser.
Rochester Institute of Technology............. Martin Gordon
Rockland Community College .................. Morton Leifer
Schenectady County Community College... Ruth McEvoy
Suffolk County Community College.......... Peter Maritato
SUNY Environ Sci/ Forestry at Syracuse.. George Kyanka
SUNY Institute of Technology ………… Jayne Baran
Technical Career Institutes Inc.................. Jerome Zornesky
Tompkins Cortland Community College... Charles Bechtold
US Merchant Marine Academy ................. Charles Hubert
Vaughn College of Aeronautics (Flushing).. Andrew Grossfield
Vermont Technical College................. Ken Vandermark
Westchester Community College ....... Raymond Mignogna
______________________________________________________________________________________________
New York State Engineering Technology Association Spring 2013 Newsletter
_________________________________________________________________________________
- 22 -
About Our Next Newsletter….
Our Next Newsletter will be distributed the third week of September 2013. Articles received prior to September
14th, will be included. You’ll notice that more space is being allotted to colleges in “News from around the
State,” even allowing the inclusion of modestly sized photographs or diagrams. In as much as the newsletter is
to be downloaded from the web and not mailed (at great cost), I welcome the opportunity for the newsletter be
the NYS Engineering Technology educator’s journal of record. Your articles are welcome, and greatly
appreciated.
Your NYSETA Colleagues and I would be delighted to hear of anything of special interest happening on your
campus such as:
1. New curricula being considered,
2. Changes in your staff,
3. Grant activities, successful or not,
4. New technology authors on your staff,
5. Engineering Technology teaching positions open at your college,
6. New Technical facilities planned or under construction on your campus
7. Recent retirements, promotions, or other staff changes on your campus,
8. TAC-ABET accreditation visits, and,
9. Noteworthy awards to personnel or students.
You may email articles to the editor at: [email protected]
Please type “NYSETA NEWSLETTER” as the subject of your e-mail.