news letter of k.ramakrishnan college of technology ssue 3...
TRANSCRIPT
Issue 3 (December 2018)
News letter of K.Ramakrishnan college of Technology
CHAIRMAN’s MESSAGE
Dr.K.Ramakrishnan
Chairman
ABOUT THE INSTITUITION
K.Ramakrishnan College of Technology, Tiruchirapalli, situated in the
famous temple town Samayapuram, is a premiere organization striving
to bring in constructive transformation in young aspirants by imparting
technical, behavioral and value based education where we focus on em-
powering the students to get placed in World Class Corporate and intro-
ducing rich corporate culture to meet the hurdles and challenges of cor-
porate sector and also augment the knowledge of students, foster their
talents and broaden their outlook towards life by enhancing their per-
sonality, communication and bringing in entrepreneurial skills. We be-
lieve in educating, enhancing and empowering the student community to
face the challenges of morrow and to be the front-runners in job market.
We, at K.Ramakrishnan College of Technology, ensure that our students
are equipped with the skill sets required to surmount the challenges of
the competitive world.
Education enables a person to face new challenges, achieve progress and lead a successful life. We, there-
fore, at K.Ramakrishnan College of Technology, would like to encourage all students to thrive for the best
to make them knowledgeable in their relevant branches of engineering with high self -esteem and disci-
pline. Education in our Institution is not only for academic brilliance but also for an ambiance where our
ancient cultural heritage and human skills are enhanced. Our institution has set specific objectives and
planned activities for achieving excellence in all spheres of technical education. The service of the institu-
tion in creating personally mature, professionally equipped and service-oriented graduates is really worth
mentioning. We strongly believe in academic excellence and do not compromise on teaching standards or
discipline. These three things are the springboards on which we operate. People who feel good about
themselves produce good results and people who produce good results feel good about themselves. We
also believe in total learning and sharing. Have a visit to K.Ramakrishnan College of Technology and feel
good to get good education.
COURSES OFFERED
UG COURSES
B.E– Civil Engineering
B.E– Computer Science and Engineering
B.E– Electrical and Electronics Engineering
B.E– Electronics and Communication Engineering
B.E- Mechanical Engineering
PG COURSES
M.E– Computer Science and Engineering
M.E - Power Electronics and Drives
M.E - Embedded System Technologies
M.E - VLSI Design
EXECUTIVE DIRECTOR MESSAGE
Engineers play the most vital and important role in nation building. They create new inventions
using best engineered technologies to make human life more comfortable, secure and productive. In
modern times, nations which have rich engineering and experienced management domains are
flourishing economically and are providing better lives to their people We have excellent potential to
grow in diversified areas and excel in Engineering and Management fields. We need enormous number
of engineers and managers to write next story of success.
Page 2 News Let ter of KRCT Issue 3 (December 2018)
Dr.S.Kuppusamy
Executive Director PRINCIPAL MESSAGE
Technical Education is the backbone of every nation and is the stepping stone for a country to
move into the niche of a developed nation. The main focus of the Institution is to empower students
with sound knowledge, wisdom, experience and training both at the academic level of Engineering and
in the highly competitive global industrial market. The infrastructure facilities and state-of-the-art
equipment combined with a galaxy of competent, talented and dedicated faculty contribute to an
enjoyable and an easy learning experience. We wish the best for all our students, and the members of
the institution who reiterate their aims at providing the best in academic and extra-curricular fields. We
must believe that success is inevitable where these exist- Foresightedness, Firm Determination, Hard
work and Discipline. Dr. S.Muruganandam
Principal
OTHER FACILITIES
Conference halls
Laboratories
Gymnasium with modern equipment
Cafeteria
World class play ground
Central Library
Hostel
Transportation
Free Wi-Fi
Research labs
Health Center
NSS & YRC
Professional Body Student Chapters
P a g e 3 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
PLACEMENT
The Training and Placement Cell organizes
a number of training programs for the stu-
dents of all semesters with the help of in-
house experts and experts drawn from pro-
fessional agencies. The activities have
proved exceptionally useful in shaping the
career of students.
S Kiruthika, R. Jagadheeswari, A. Oorkalan, N. Prakhash of Civil Department published their paper on “Investigation on implementa-tion of Paraffin wax in building materials “ in International Journal of Civil Engineering and Technology (IJCIET), Vol. 9, No. 11, 2018 Karthikeyan V of Civil Department published a paper on “Removal of chromium using photocatalytic Reactor” in Journal of Environ-mental Research and Development, vol. 12, no. 4, pp 420-424
RESEARCH AND DEVELOPMENT
P a g e 4 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
Karthikeyan V of Civil Department published a paper on “Self-Curing Concrete by using Super Absorbent Polymer” in International Journal of Engineering Research & Technology (IJERT), vol. 6, no. 7. Kalaivanan C, Karthikeyan V, Hubert Christopher I, 2018 „Generating organic manure (compost Tea) by kitchen waste‟, Journal of Emerging Technologies and Innovative Research (JETIR), vol. 5, no. 11, pp 48-53 Arun Prasath T, 2018 „Influence on concrete properties using multiple corrosion inhibitants‟, International Journal of Science and Research, vol. 7, no. 11, pp 237-240 Hubert Christopher I, 2018 „Study on Glass Fibre Reinforced Concrete with Partial Replacement of Fine Aggregate by Copper Slag‟, International Journal of Engineering Research & Technology (IJERT), vol. 6, no. 7. Rajendran R, 2018 „An Experimental Study on M30 Grade Concrete by Partial Replacement of Coarse Aggregate as Steel Slag and Fine Aggregate as Crumb Rubber‟, International Journal of Engineering Research & Technology (IJERT), vol. 6, no. 7. Perumal K, 2018 „An Experimental Investigation on Flexible Pavement Using Reclaimed Asphalt Pavement‟, Journal of Advanced Research in Dynamical and Control Systems (JARDCS), no. 10 (Special Issue), pp 30-35 Sudharsan P, Hubert Christopher I, 2018 „A Comparative Analysis of Bacteria Made Bio Brick and Conventional Brick‟, International Journal of ChemTech Research, vol. 11, no. 2, pp 132-136 Shahul Hameed M, 2018 „Evaluation Of Cost Effective Sewage Treatment Plant For Augmentation Of Irrigation Water Supply In Sulur Small Tank, Sulur‟, International Journal Of Advance Research And Innovation, vol. 1, pp 1-4 Dr.Nambi Manavalan. R,2018, „Estimation of Forest Fire Spread by Modeling in GIS Platform‟, Indian Journal of Science and Tech-nology, vol. 11, no. 6, pp 1-6, Dr.T. Avudaiappan of CSE Department published a paper on “Priority based prediction mechanism for ranking providers in federat-ed cloud architecture” in Cluster Computing Dr.T.Avudaiappan, Dr.V.Vijayan and S.Dinesh published their paper on “Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding “ in Journal of Applied Fluid Mechanics, Vol. 11, Special Issue, pp. 129-134, 2018. Dr.T. Avudaiappan of CSE Department published a paper on “Medical Image Security Using Dual Encryption with Oppositional Based Optimization Algorithm” in Journal of Medical Systems R.Jaiganesh of EEE Department published a paper in International journal for Modern trends in Science and Technology, ISSN 2455- 3778, Volume:4, Issue no: 08, page:60-62,August 2018 C.Kalavalli of EEE Department published a paper in International journal for Modern trends in Science and Technology, ISSN 2455- 3778, Volume:4, Issue no: 08, page:60-62,August 2018 M.Shivashankari, R.Revathi published a paper on “Channel estimation and performance analysis of MIMO OFDM system using QBR technique for realizing modern industrial standards” in International journal of applied mathematics Dr.S.Suganthi published a paper on “Loss analysis of wideband RF MEMS shunt capacitive switch in T and match configurations” in The applied computational electromagnetic society T.Rajkumar of Mechanical department is published a paper on “Photocatalytic degradation of organic contaminants by g-C3N4/ EPDM nanocomposite film: viable, efficient and facile recoverable” in Material Science & Engineering: C Mr.Yogeshwaran, Karuppasamy and S.Arul of Mechanical Department published a paper on “Experimental Investigation and Opti-mization of welding parameters of metal inert gas welding process in joining dissimilar metals” in International Journal of Mechanical and Production Engineering Research and Development Dr.S.Vijayan published a paper on “Comparison of different tool path in pocket milling” in International Journal of Mechanical Engi-
neering and Technology
P a g e 5 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
S.Dinesh, Godwin Antony, K.Rajaguru and P.Parameshwaran of Mechanical Department on “Comprehensive Analysis Of Wire Elec-
tric Discharge Machining Process In Machining High Chromium High Carbon Steel” in International Journal of Mechanical and Pro-
duction Engineering Research and Development
Dr.S.Vijayan, S,Dinesh, Godwin Antony and K.Rajaguru of Mechanical Department published a paper on “Investigation And Opti-
mization Of Machining Parameters In Processing Aisi 4340 Alloy Steel With Electric Discharge Machining” in International Journal
of Pure and Applied Mathematics.
Dr.S.Vijayan published a paper on “Analysis of Wear Behaviour of Aluminium Composites with Silicon Carbide and Titanium Rein-
forcement” in International Journal of Mechanical Engineering and Technology
Dr.S.Vijayan published a paper on “Effect of Al203, Aluminium Alloy and Fly Ash for Making Engine Component” in International
Journal of Mechanical Engineering and Technology
Dr.S.Vijayan published a paper on “Performance Analysis in End Milling Operation” in International Journal of Mechanical Engi-
neering and Technology
Dr.S.Vijayan published a paper on “Performance Analysis of Surface Roughness modelling using Soft Computing Approaches” in
Applied Mathematics and information Science
Dr.S.Vijayan published a paper on “Computational Analysis and Optimization of Spiral Plate Heat Exchanger” in Journal of applied
Fluid Mechanics
Dr.S.Vijayan published a paper on “Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding” in Journal
of applied Fluid Mechanics
Dr.S.Saravanan of Mechanical Department published a paper on “Wire electrical discharge machining of AA6063- TiC particle rein-
forced metal matrix composites using Taguchi method” in Materials Research Express.
Dr.S.Saravanan of Mechanical Department published a paper on “Optimization of wear parameters and their relative effects on stir
cast AA6063-Si3N4 Composite “ in Materials Research Express.
G.Navaneethakrishnan of Mechanical Department published a paper on “Photocatalytic degradation of organic contaminants by g-
C3N4/ EPDM nanocomposite film: viable, efficient and facile recoverable” in Material Science & Engineering: C
G.Navaneethakrishnan of Mechanical Department published a paper on “Experimental Investigation On Mechanical Properties Of
Hybrid Composite Material” in International Journal of Mechanical and Production Engineering Research and Development
(IJMPERD)
G.Navaneethakrishnan of Mechanical Department published a paper on “Experimental Analysis Of Glass Fibre - Sisal Reinforced
Composite Material” in International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)
P.Parameshwaran of Mechanical Department published a paper on “Experimental Study On Mechanical And Corrosion Characteris-
tics Of Nab Alloy With The Addition Of Chromium” in Materials Today: Proceedings
S.Dinesh of Mechanical Department has published a paper on “Analysis and optimzation of machining paramters in through feed
centerless grinding of high carbon steel” in International Journal of Mechanical Engineering and Technology
P.Lakshmanan of Mechanical Department published a paper on “Analysis of Varying Geometri Structures of Fins using Radiators“
in Journal of Applied Fluid Mechanics
G.Arunkumar of Mechanical Department published a paper on “Experimental Heat Transfer Analysis on Heat Pipe using Sio2
and Tio2 Nano Fluid “ in Journal of Applied Fluid Mechanics
P a g e 6 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
ACADEMIC ACIEVEMENTS GRADUATION DETAILS (2015—2019 BATCH): NPTEL COURSES PARTICIPATION & ACHIEVEMENT:
UNIVERSITY RANK (2013—2017 BATCH)
SOLAR VEHICLE CONTEST Secured 20th Position in National Solar Vechicle Challenge – (NSVC) by by EEE students Held at Merchant Engineering College, Mehsana, Gujarat, 2018 Secured 2nd Position in category of Light Vechicle, Best Team Coordination, Best Captancy in Saur Urja Vehicle Challenge (SUVC) by Mechanical students Held at Gwalior, Mathyapradesh, 2018
Department
2015-2019 BATCH
No. of Students Admitted
No. of Success-ful Students
Successful Rate First Class
With Distinction
First Class
Second Class
CIVIL 136 110 80.88% 5 80 25
CSE 99 88 88.89% 3 72 13
EEE 102 91 89.22% 3 80 8
ECE 103 95 92.23% 1 92 2
MECH 143 130 90.90% 1 113 14
OVERALL 583 514 88.16% 13 437 62
Depart-ment
Student Participation
Faculty Participation
2016-17 2017-18 2016-17 2017-18
CIVIL *** *** *** 3
CSE 9 18 11 5
EEE * 10 * 8
ECE 3 14 15 28
MECH 21 6 1 9
OVER-ALL
33 48 27 53
Course Run Present Gold Elite Successful Participation
Jul-Oct 2018 135 2 59 63 11
Jan-Apr 2018 48 0 22 20 6
Department Student Name CGPA Rank
CIVIL DEENA LAVEENYA S R 9.07 10
SABARINATH 9.02 14
P a g e 7 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
ACADEMIC PERFORMANCE:
ACTIVITIES ORGANISED BY DEPARTMENTS
GUEST LECTURES ARRANGED:
Academic year Semester No. of Students
Appeared No.of Students
Passed Percentage of Pass
All Over Tamil Nadu
Rank In Trichy
2018-2019 NOV / DEC - 2018 2200 1237 56.23 41 3
APR / MAY - 2018 2390 1749 73.18 32 3 2017-2018
NOV / DEC - 2017 2406 1392 57.86 68 5
2016-2017 APR / MAY - 2017 2343 1969 84.04 16 2
NOV / DEC - 2016 2348 2091 89.05 10 3
2015-2016 APR / MAY - 2016 2250 1934 85.96 24 2
NOV / DEC - 2015 2259 1858 82.25 16 1
2014-2015 APR / MAY - 2015 2019 1776 87.96 13 2
NOV / DEC - 2014 2024 1560 77.08 32 2
2013-2014 APR / MAY - 2014 1764 1401 79.42 38 3
NOV / DEC - 2013 1771 1484 83.79 5 2
2012-2013 APR / MAY - 2013 1195 966 80.84 30 3
NOV /DEC - 2012 1200 831 69.25 43 3
Department Year/ Sem Subject Resource Person
Civil IV Year/VIII Sem Principle of management Dr.S.Arunkumar
Civil II Year/IV Sem Construction materials Mr.A. Rangaraj
Civil III Year/VI Sem Environmental Engineering II Dr.T.S.Ramesh
CSE III Year/VI Sem Data Structures Dr.R.Mohan, Assistant Professor, NIT,Trichy
CSE II Year/IV Sem Computer Networks MS.K.Dakshina Assistant Professor, IIIT,Trichy
CSE III Year/VI Sem Artificial Intelligence Dr.U.Srinivasalu Reddy, Assistant Professor,
NIT,Trichy
CSE IV Year/VII Sem Cryptography and Network Security Dr.T.Suresh Kumar, Assistant Professor,
K.S.Rangasamy College of Technology
CSE III Year/V Sem Computer Graphics Mr.M.Siva Sundara Vinayaga Moorthy, Assistant
Professor, MAM college of Engineering
CSE IV Year/VII Sem Cryptography and Network Security Dr.T.Suresh Kumar, Assistant Professor,
K.S.Rangasamy College of Technology
EEE II year/III Sem Digital Logic Circuits Dr.S.Moorthi, Assistant Professor, NIT,Trichy
ECE II Year/IV Sem Maxwell Equation & Wave Equations Dr.C.Muthuchidambaranathan Professor/ECE
NIT Trichy
ECE All Years
Indian Satellities & their uses, Aware-
ness of Job Opportunities in Space
Science
Mr.J.Vasanth Kumar Scientist SC Grade (Payload
Checkout Engineer) ISRO Bangalore
P a g e 8 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
PROFESSIONAL BODY MEMBERSHIPS & EVENTS ORGANISED:
EVENTS ORGANISED:
An Seminar on “Understanding Solid Waste Management” was organised by Depart-ment of Civil Engineering on 21.02.2018 A four days workshop on “Internet of Things” was organised by CSE Department on 09-02-2018 to 12-02-2018 An One day Seminar on “Image Processing” was organised by CSE Department on 27-02-2018 An One day Workshop on “Hardware and Networking” was organised by CSE Depart-ment on 13-08-2018 An One day Workshop on “Machine Learning” was organised by CSE Department on 21-09-2018 A Two week FDP on “Data Science and Big Data analysis” was organised by CSE De-partment from 08-06-2018 to 22-06-2018 A Workshop on “PROTEUS SOFTWARE FOR POWER CONVERTER, CON-TROLLER AND EMBEDDED SYSTEM DESIGN” conducted on 07-09-2018 A Workshop on “MODELLING OF SPECIAL ELECTRICAL MACHINES USING MATLAB” conducted on 04-09-2018 A Workshop on “FILTER DESIGN AND THD ANALYSIS FOR AC-DC CON-VERTER USING MATLAB” conducted on 26-07-2018 An Awareness Program on “Indian Satellites and their uses, Awareness of job opportuni-ties in space science” was organised by IEEE Student chapter on 10.02.2018 An Awareness Program on “Breast Cancer” was organised by IEEE Student chapter on 07-03-2018 An two days workshop on “National Level Workshop cum Coding Contest in Verilog & VHDL Coding” was organised by IEEE Student chapter on 01-03-2018 and 02-03-2018
Professional Bodies
IEEE
ISTE
IETE
IE(I)
CSI
SAE(I)
ICI
SEMCE(I)
Event
ACADEMIC YEAR
2016-17 2017-18
Workshop 17 21
Seminar 5 9
International Conference
1 1
Symposium 6 7
FDP 6 2
P a g e 9 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
EVENTS ORGANISED (Continued:
A seminar on “Health awareness seminar on polycystic ovarian syndrome” was organ-
ised by ECE Department on 06.09.2018
A seminar on “Personality and hygiene management “ was organised by ECE Depart-
ment on 18.09.2018
An one day workshop on “Quantum Dot Cellular Automata” was organised by ECE
department on 20.09.2018
An one day workshop on “CNC WORKSHOP” was organised by Mechanical De-
partment on 23-02-2018
An one day workshop on “Automobiles” was organised by Mechanical Department
on 22-02-2018
An one day workshop on “3-D PRINTING TECHNOLOGY “ was organised by
Mechanical Department on 15-02-2018
An one day workshop on “Tig and Mig Welding“ was organised by Mechanical De-
partment on 22-02-2018
An “FDP ON SEM IMAGE ANALYSIS” was organised on 15-09-2018 by Mechani-
cal Department
An “FDP ON AUTOCAD” was organised on 11-09-2018 and 12.09-2018 by Me-
chanical Department
A Workshop on “3D PRINTING TECHNOLOGY” was organised on 11-09-2018
and 07-09-2018 by Mechanical Department
A Workshop on “RECENT TRENDS IN AUTOMOBILES” was organised on 29-08-2018
by Mechanical Department
A Workshop on “TIG AND MIG WELDING” was organised on 23-08-2018 by Mechani-
cal Department
An “FDP ON ART OF DOING RESEARCH” was organised on 14-08-2018 by
Mechanical Department
SPORTS FACILITIES & ACHIEVEMENTS
FACILITIES:
Sports Complex with following court:
Basket Ball Court
Volley Ball Court
Tennis Clay Court
Two Ball Badminton Court
Table Tennis Court
Football Ground
Cricket Ground
Cricket Net Practice
Hockey Ground
Kabadi Court
P a g e 1 0 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
Zonal Level Events 2017-18 2018-19
Badmition (Men) Winner Winner
Basket Ball(Women) Winner Winner
Volley ball (Men) Winner Winner
Hockey Runner Winner
Table Tennis(Men) Runner Winner
Ball Badmition (Men) Winner Runner
Volley ball (Women) Winner Runner
Football Runner ***
Table Tennis(Women) Runner Runner
Athlethics(Overall) Second Second
Athlethics(Overall)-W *** ***
Chess (Women) *** ***
Hand Ball (Men) *** Runner
TAKEWONDO(Men) *** Runner
KHO-KHO(Men) *** Runner
P a g e 1 1 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
CULTURAL AND CO CURRICULAR ACTIVITIES
Fine arts club of our college actively engaged in providing the students with an extensive range of cultural and co-curricular activi-
ties. Keeping in line with this commitment our college organizes Enthusia every year. It is the much awaited events with multiple
events in dance, music, fashion, drama, literary and various other technical and cultural fields and offers a plethora of opportuni-
ties to the students to showcase their talents
INDEPENDENCE DAY & REBUPLIC DAY CELEBRATIONS
The Independence Day at K.Ramakrishnan college of technology was an event that stirred up the patriotic feelings of everyone
present on the occasion. The Chief guest hoisted the flag and delivered the speech exhorting students to take India as a bright
future and the day .
The Republic Day was marked by the unfurling of the national flag by the Chief guest. In his speech, the chief guest mentioned
the significance of the day to students and staff. Stu-dents, and staff gathered on the occasion and celebrated the day with gusto
and a determi-nation to take to K.Ramakrishnan College of Technology to newer heights.
ACKNOWLEDGMENT
We thank all the faculty members, administrative staff and students of K. Ramakrishnan college of Technology for their help and
cooperation in bringing out the newsletter
EDITORIAL BOARD
Mr. A.T.SANKARA SUBRAMANIAN, AP /EEE,
K.RAMAKRISHNAN COLLEGE OF TECHNOLOGY,
P a g e 1 2 N e w s L e t t e r of K R C T I s s u e 3 ( D e c e m b e r 2 0 1 8)
NATIONAL SERVICE SCHEME / YOUTH RED CROSS / RED RIBBON CLUB ACTIVITES
S.No Date of the Programme
Name of the Programme No of
Participation
1 28.1.18-29.1.18 Polio drop 20
2 5.3.18 Blood Donation ,SRM Hospital 73
3 23.4.18-24.4.18 Road safety Programme 25
4 3.7.18 Tobacoo Awarness program 150
5 21.8.18 Celebration of national youth day 83
6 28.8.18 Clean our college campus 50
7 27.11.18 Nilavembu kasayam 15