newsletter...filling & crimping 2:30pm - 4:00pm • crimping: how crimping works, collets, crimp...

4
3621 Hill Rd., Parsippany, NJ 07054 easternaerosol.com Newsletter Technical workshops team up with Golf Outing New two-day event to be held August 3-4 in Hamburg, NJ The Summer Golf Outing at Crystal Springs Golf Resort in Hamburg, NJ, will be expanded to a two-day event that will incorporate a day of hands-on technical workshops. Three 90-minute workshops, designed to offer educational training and instruction from technical experts in various aspects of aerosol packaging, will be held on Monday, August 3 with golf following on Tuesday, August 4. Workshop attendance will be limited to about 50 people, with 12–13 people in each group. Topics will include: Cans: aluminum, two- and three-piece steel and general testing 10:30am - 12:00pm A speaker for each type of can will present how they are made, technical drawings, measuring, size options, lining options, and for aluminum: shoulders, curls and shoulder progression General testing: Burst test video, WACO testing, contact height and more Lunch 12:00pm - 1:00pm Valves 1:00pm - 2:30pm Valve breakdown: how different types of valves work, construction analysis, differences between vertical, tilt, up/down, powder and male vs. female Measuring/inspection: pin gauging holes, DT length rulers, reading a drawing Gaskets: shapes, types, materials, swelling, durometer, identification Actuators/Inserts: NMBU, MBU, buttons, actuators, spray-through domes, different styles and effects Filling & Crimping 2:30pm - 4:00pm Crimping: how crimping works, collets, crimp depth/diameter, demonstration of good vs. bad crimps Filling/gassing: discussion of the filling process: clean can, fill, set valve, crimp (or UTC), gas, checkweigh, water bath, tip and cap, code and the difference between TTV and UTC filling Inside the aerosol can: glass bottle aerosols, powders, one- and two-phase, material incompatability and a demonstration of a quick tranfer fill into a bottle Finished good testing: using water-filled BOVs to test delivery rate, pressures, stem height and spray patterns, and discuss flame extenstion Speakers will include Buddy Carhart, EXAL; Dan Figore, Crown; Serena Jackson, Unilever; Scott Martz and Mike Quint, Precision; Mike Reuter, Aptar; Jennifer Rivera, Zotos; Dennis Smith, Precise Packaging and Kevin Verville, Summit. Crystal Springs Golf Resort in Hamburg, NJ Eastern Aerosol Association @EastAerosol June 2015

Upload: others

Post on 25-Sep-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Newsletter...Filling & Crimping 2:30pm - 4:00pm • Crimping: how crimping works, collets, crimp depth/diameter, demonstration of good vs. bad crimps • Filling/gassing: discussion

3621 Hill Rd., Parsippany, NJ 07054 easternaerosol.com

Newsletter

Technical workshops team up with Golf OutingNew two-day event to be held August 3-4 in Hamburg, NJ

The Summer Golf Outing at Crystal Springs Golf Resort in Hamburg, NJ, will be expanded to a two-day event that will incorporate a day of hands-on technical workshops. Three 90-minute workshops, designed to offer educational training and instruction from technical experts in various aspects of aerosol packaging, will be held on Monday, August 3 with golf following on Tuesday, August 4. Workshop attendance will be limited to about 50 people, with 12–13 people in each group. Topics will include:

Cans: aluminum, two- and three-piece steel and general testing 10:30am - 12:00pm

• A speaker for each type of can will present how they are made, technical drawings, measuring, size options, lining options, and for aluminum: shoulders, curls and shoulder progression

• General testing: Burst test video, WACO testing, contact height and more Lunch 12:00pm - 1:00pm Valves 1:00pm - 2:30pm

• Valve breakdown: how different types of valves work, construction analysis, differences between vertical, tilt, up/down, powder and male vs. female

• Measuring/inspection: pin gauging holes, DT length rulers, reading a drawing

• Gaskets:shapes,types,materials,swelling,durometer,identification• Actuators/Inserts: NMBU, MBU, buttons, actuators, spray-through domes, different styles and

effects Filling & Crimping 2:30pm - 4:00pm

• Crimping: how crimping works, collets, crimp depth/diameter, demonstration of good vs. bad crimps

• Filling/gassing:discussionofthefillingprocess:cleancan,fill,setvalve,crimp(orUTC),gas,checkweigh,waterbath,tipandcap,codeandthedifferencebetweenTTVandUTCfilling

• Inside the aerosol can: glass bottle aerosols, powders, one- and two-phase, material incompatabilityandademonstrationofaquicktranferfillintoabottle

• Finishedgoodtesting:usingwater-filledBOVstotestdeliveryrate,pressures,stemheightandspraypatterns,anddiscussflameextenstion

Speakers will include Buddy Carhart, EXAL; Dan Figore, Crown; Serena Jackson, Unilever; Scott Martz and Mike Quint, Precision; Mike Reuter, Aptar; Jennifer Rivera, Zotos; Dennis Smith, Precise Packaging and Kevin Verville, Summit.

Crystal Springs Golf Resort in Hamburg, NJ

Eastern Aerosol Association @EastAerosol

June 2015

Page 2: Newsletter...Filling & Crimping 2:30pm - 4:00pm • Crimping: how crimping works, collets, crimp depth/diameter, demonstration of good vs. bad crimps • Filling/gassing: discussion

Board of DirectorsPresidentChris NyaradyMontebello Packaging 315-904-4207

Vice PresidentRobert FlahertyAmerican Spraytech908-725-6060

TreasurerDennis SmithPrecise Packaging 845-878-3031

Secretary Pete EricksonAptar Beauty & Home 908-334-8542

TrusteesCynthia HundleySpray Technology973-331-9545 Mac Bhuta Consultant 908-240-3753

Buddy CarhartExal Corp.914-649-2983

Bob DariaAmerican Spraytech908-725-6060

Serena JacksonUnilever203-381-4336

Maria Lind-HansenYoungstown Pre-press732-270-4625

Scott MartzPrecision Valve 864-770-0964

Judy Meyer DSM Nutritional Products 973-257-8501

Rey OrdialesColgate-Palmolive973-630-1674

Ken WannerFormulated Solutions727-373-3970

EasternAerosol.com

The EAA Board of DirectorsFront row, left to right: Ken Wanner, Serena Jackson, Judy Meyer, Cindy HundleyBack row: Dennis Smith, Chris Nyarady, Bob Flaherty, Rey Ordiales, Scott Martz

On behalf of the entire aerosol industry, the NAA arranged for Mike Freeman, President, WD-40, to testify before the House Committee on Energy & Commerce, which is considering legislation to prevent the EPA from enacting a reduced ozone standard before the current standard is fully implemented. (Seethefullreportin the June issue of SPRAY,p.36).

The EAA board had supported the preliminary effort of the NAA to travel to Washington, DC in April to meet with various members of Congress regarding this pending legislation. EAA Board member Cindy Hundley met withRep.RodneyFreylinghusen’s(R-NJ)office,aswellaswithstaffofSen.CoryBooker(D-NJ)inanefforttogainsupportfortheCASE(CleanAir,StrongEconomies)Act,whichwasreintroducedtobothhousesofCongresson March 17.

OnJune16,MikeFreemanpresentedtestimony(http://1.usa.gov/1Ssb03k)advocating industry’s position regarding sensible regulation that will identify and implement policies to most effectively achieve the goal of clean air. In histestimony,Freemansaidthatweallneedtoworktogethertofindawayto achieve both economic growth and environmental progress, and they do not necessarily have to be mutually exclusive.

WD-40 Testifies before Congress

Left to right: Greg Johnson, Sherwin-Williams; Rep. Pete Olson (R-TX), Mike Freeman, WD-40; and George Buckland, DS Containers

Page 3: Newsletter...Filling & Crimping 2:30pm - 4:00pm • Crimping: how crimping works, collets, crimp depth/diameter, demonstration of good vs. bad crimps • Filling/gassing: discussion

Summer Golf Outing & Hands-on Workshops

EasternAerosol.com

Credit Card and PayPal accepted

Or send a check (payable to EAA) to:

Cindy HundleySpray Technology & Marketing

3621 Hill Rd.Parsippany, NJ 07054

Registration Fees8/3 Workshops: $200 ($150 for Spring Meeting Attendees)8/4 Social Only: $758/4 Golf & Social: $200Hole Sponsor: $200Major Hole Sponsor: $400

Register online now at

Hands-on Workshops/Golf Outing • August 3-4 • Hamburg, NJ

Monday, August 3Crystal Springs Golf ResortHamburg, NJ

Registration: 10:00amCans: 10:30am - 12:00pmLunch: 12:00pm - 1:00pmValves: 1:00pm - 2:30pmFilling/crimping: 2:30pm - 4:00pm

Space is limited to 50 total attendees, so reserve a spot today!

Hands-on Technical Workshops 19th Annual Golf Outing

Tuesday, August 4Crystal Springs Golf ResortHamburg, NJ

Registration: 11:00amLunch: 11:30amShotgun Start: 1:00pmCocktails and buffet dinner to follow.

Prizes include: Low gross scramble, putting contest, closest to the pin, longest drive, raf-fledrawingsand$10,000forahole-in-one.

Joe Franckowiak, Berry Plastics, takes aim down the fairway at last year’s outing

Page 4: Newsletter...Filling & Crimping 2:30pm - 4:00pm • Crimping: how crimping works, collets, crimp depth/diameter, demonstration of good vs. bad crimps • Filling/gassing: discussion

3621 Hill Rd. Parsippany, NJ 07054

Register atEasternaerosol.com

Hands-on Workshops

Golf Outing

Details Inside!

Abplanalp Sanders Fund DonationA "thank you" was received from the University of Minnesota for the $500 donation made by EAA to the Abplanalp Sanders Memorial Scholarship, which annually funds a graduate fellowship in aerosol research.

On behalf of the college...

The dedication and support of the Abplanalp Sanders Fellowship Fund by the EAA is so very much appreciated. The most recent $500 contribution shows your special commitment toward the upward progress of the aerosol industry by supporting higher education. This contribution moves the EAA up to the next level of $1000+ donors and you are now Spon-sors of the Abplanalp Sanders Fellowship Fund.

The Abplanalp Sanders Fellowship Fund continues to grow and support University of Minne-sota College of Science & Engineering Fellows each year with 100% of the donated money going directly into the Fund. Each student receives $32,000 per year (normally two years per Fellow) to continue his/her doctorate degree researching aerosol particulates.

I am truly proud to see the progress that has been made since the inception of this Fellow-ship Fund and the University of Minnesota and I thank you so much for your continued effort and support.

My very best regards,Donald E. RowsonPresident/CEO, Industiral Hydrocarbons, Inc.Chairman, Abplanalp Sanders Fellowship Fund