newsletter n. 15 - acimall · istanbul university, biesse and crescope. the host of the symposium...
TRANSCRIPT
Newsletter n. 15
February 2017
In brief
WORLD EXHIBITIONS
NETWORK 2017
2
CUSTOMS CODE 2
AIMSAD - TURKEY 3
DELHIWOOD 2017 6
DUBAI WOODSHOW 2017 7
FITECMA 2017 8
LISDEREVMASH 2017 9
IFMAC 2017 10
WOOD PROCESSING
MACHINERY
11
VIETNAMWOOD 2017 12
WOOD-TEC 2017 13
XYLEXPO 2018 14
from the federation
GENERAL SECRETARIAT
Centro Direzionale Milanofiori
1a Strada - Palazzo F3
I-20090 Assago (Milano)
www.eumabois.com
ACTIVITIES IN RECENT MONTHS
After the election of the new Board and the new President Juergen Koeppel, Eumabois
has started to follow the guidelines identified at the General Assembly held last
September in Luzern, Switzerland.
Inside the organization, some administration tasks have been optimized to improve
efficiency both on the economic side and in terms of deployed effort. In addition, a
“Code of Conduct” is being drafted, which will be a vademecum for the next meetings
under the Eumabois brand.
The strength and representativeness of an association are based on the message that the
association itself transfers to its stakeholders. In this respect, we will soon achieve a
better definition of the Eumabois mission, consequently improving the identification of
members with the Federation.
In the exhibition area, we are carrying on major initiatives to collect information for the
evaluation of international exhibitions directly from exhibitors; the volume of information
keeps growing and the biennial period of data collection will close in September.
Eumabois is attending Ligna (May 22-26) in the area dedicated to international
associations and trade fair organizations.
In other areas, we organized the first meeting with the world’s leading woodworking
machinery and tools manufacturers, in order to understand whether it’s possible to
improve the quality of data and industry-specific economic trends. Economic studies so
far available to “industry stakeholders” are largely incomplete and such gap must be
filled with the support of manufacturers. The project is in its infancy and shall be
developed in the coming months.
One final remark about the technical works for the harmonization of safety standards
at international level. The Luzern Assembly explicitly expressed the need for Eumabois
to have a strong voice within the European Union; the next meetings will be focused on
this topic.
2
from the federation
The General Assembly approved the exhibition calendar for 2017, including all the events that will be sponsored by
Eumabois, the European Federation of woodworking technology, tools and accessories manufacturers.
Exhibitions are one of the key topics on the federation’s agenda. Constantly committed to limiting the proliferation of events
that only cause a waste of resources for companies, the organization selects and supports exhibitions that guarantee
specific standards to exhibitors and visitors, representing an effective and tangible reference in the respective world
region.
WORLD EXHIBITIONS NETWORK 2017
EXPOPROMUEBLE Mexico City - Mexico 18/21 January
DELHIWOOD New Delhi - India 1/4 March
WOODSHOW Dubai– UAE 7/9 March
LIGNA Hanover - Germany 22/26 May
FITECMA Buenos Aires - Argentina 13/17 June
WOOD AND BIOENERGY Jyvaskyla - Finland 6/8 September
DREMA Poznan - Poland 12/15 September
LISDEREVMASH Kiev - Ukraine 26/29 September
IFMAC Jakarta - Indonesia 27/30 September
WOOD PROCESSING MACHINERY Istanbul - Turkey 14/18 October
THE 12th VIETNAM
INTERNATIONAL WOODWORKING
INDUSTRY FAIR -VIETNAMWOOD
Ho Chi Minh City - Vietnam
18/21 October
WOOD-TEC Brno - Czech Republic 31 October/ 3 November
WOODEX Moscow – Russia 14/17 November
AS OF JANUARY 1ST, 2017, MACHINING CENTERS
HAVE A SPECIFIC CUSTOMS CODE
Upon provision by the European Commission, starting from January 1st, 2017, “machining centers” are included in the Combined Nomenclature (CN). In customs and statistic documents, as well as in many trade documents, machinery manufacturers shall indicate specific codes, often referred to as goods code, customs tariff code, statistics code or HS code (CN in Europe). The new code 8465 20 00: machining centers has been introduced. In the future, this code will enable to measure the trade flows of this type of machines. As a result, another unknown variable has been eliminated from the jungle of data about woodworking machinery. Definition For the purposes of subheading 8465.20, the term “machining centers” applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme. Context: modifications to goods/customs codes As the first six goods/customs codes authorities were unified in 1988 (under the so-called “Harmonised System””), any modification is possible only if the WCO implements the necessary changes. This is normally done on a five-year basis. The HS 2012 system effective until today has been replaced by HS 2017 as of January 1st, 2017. The purpose of such update is to implement modifications into international trade, whether its technical innovations or modified trade volumes for specific types of goods.
3
from the associations
Aimsad - Turkey
IZWOOD AND IZMOB EXHIBITIONS TO REVIVE THE INDUSTRY
İZWOOD 2017 and İZMOB 2017 exhibitions will be held in cooperation of AIMSAD and TÜYAP on 11-15 April
2017 at İzmir Exhibition area. Leading companies, relevant associations, media and relevant organizations will be
participating in the exhibition. The synergy of the two simultaeous exhibitions will gather all woodworking and furniture by-
industries from processing raw materials to their presentation to end consumers. Furthermore, PLASTAPAK Plastic and
Packaging Technologies Machine and Materials Exhibition wil take place in the other hall on the same dates.
TURKISH ASSEMBLY OF MACHINERY AND EQUIPMENT MANUFACTURERS
GATHERED ON 18 OCTOBER 2016
The participant of the meeting discussed the recent developments in the industry and evaluated the routine report
on “Current Problems of Machinery and Equipment Manufacturing Industry and Suggestions of Solutions”. Onur Kaçak,
Secretary General of AİMSAD was among the participants of the meeting. At the event, the problems and possible
solutions were discussed in the context of the preparation activites for 9th Industrial Economy Council of
Turkey.
During the first session of the meeting, participants discussed the dependency on imports, insufficiency of industrial
facilities, high costs of investment, supporting local products, and inadequacy of promoting and encouraging activities in
transferring technology and specialists.
4
from the associations
Aimsad - Turkey
INTERNATIONAL SYMPOSIUM ON “DESIGN ADVENTURE OF WOOD”
The international symposium on “Design Adventure of
Wood” was held on 24 October 2016 with the contributions
of organizations in the industry, including TÜYAP, AEMDER,
Istanbul University, Biesse and Crescope. The host of the
symposium was the Istanbul branch of Chamber of
Forest Engineers (OMO).
During the symposim, industrial stakeholders discussed the whole
process from the design and manufacture of wood to its
transformation into a product. In addition to the participants who
exchanged their opinions, Arif Onur Kaçak, Secretary General of
AİMSAD explained the overall situation of the industry and made a
presentation on problems of domestic machinery manufacturers and
potential solutions.
TÜYAP EXHIBITION CENTER HOSTS WOODWORKING MACHINERY AND
INTERMOB EXHIBITIONS ON 22-26 OCTOBER 2016
29th Woodworking Machinery Exhibition and 29th Intermob Exhibition, held with the sponsorship of the Association of Woodworking Machinery and By-industry Businessmen (AİMSAD), became a focus of attention with 861 companies from 30 countries and a total of 71,581 visitors from 103 countries. Hosted by REED-TÜYAP and with the sponsorship of the Association of Woodworking Machinery and By-industry Businessmen (AİMSAD), the exhibitions featured 48 companies exhibiting their latest products. Furthermore, special sections for Promatt, bed manufacturing industry, equipment raw materials and machinery were
presented to the visitors at the İntermob Exhibition. The next exhibition will be held on 14-18 October 2017. The
exhibitions are set to become an effective trade platform to open new markets to companies looking to future and to help
them expand their current market shares.
5
from the associations
Aimsad - Turkey
“2016 Forum on the Future of Forest Industry” held by the
Association of Forest Industry Businessmen (ORSİAD) became a
platform for discussing the problems and future scenarios
for the industry, and featured important statements. In its
second anniversary this year, the forum gathered the
manufacturers, wholesalers and retailers in the industry, offering
them a platform to resolve all issues in the industry.
AİMSAD was among the participants of the forum. Besides
the speeches of the participants, Arif Onur Kaçak, representing
AİMSAD, brought a different perspective to the forum with his
following speech which highlighted important issues.
Arif Onur KAÇAK:I would like to greet you on behalf of AİMSAD.
In 2009, the total exports in our industry was only 9 million USD.
For all woodworking machinery, this figure rose to 83 million USD
by the end of 2014. The most important growth in our
exports was in 2013 with 94 million USD. After 2015, our
exports fell to 65 million USD. We cannot obtain the
manufacturing figures for the whole machinery industry
from Turkish Statistical Insitution. We only make a guess
and we assume that we manufactured machinery worth of
165 million USD by the end of last year. When we assume
our imports were 96 million USD, we see that an approximately
160 million USD was achieved in exports. On the other hand,
when we look at the official figures for 8 months of 2016, our
exports were 47 million USD, and imports were 56 million USD.
With this course, we believe we will achieve 65-70 million
USD in exports although we have lost Russia as one of our
largest markets. One of the most interesting aspects here is
that in our exports.
FORUM ON THE FUTURE OF FOREST INDUSTRY HELD IN KARADENIZ HALL
AT TÜYAP CONGRESS AND EXHIBITION CENTER ON 25 OCTOBER 2016
6
from the supported exhibitions
DELHIWOOD GROWS 50% BIGGER
The fifth edition of the Indian furniture manufacturing industry's eagerly anticipated biennial event, DelhiWood 2017, will
be held from 1-4 March at the India Expo Centre & Mart in Greater Noida, India.
Organised by PDA Trade Fairs the B2B trade show is, as in the past, endorsed and supported by Eumabois, the 14-
country association of European federation of woodworking machinery manufacturers. Eumabois is instrumental in
influencing the presence of the world's leading woodworking tech companies at DelhiWood.
It will showcase modern automated solutions in furniture and wood-based production technologies, to help the industry tap
into the US$35-billion furniture market (projected by the year 2020) within the country.
Over 450 exhibitors from around will showcase every facet of furniture production technologies covering machinery,
tools, fittings, accessories, raw materials and products in a whopping 30,000 square metres of space.The 4-day trade
exhibition will feature the latest in furniture production and woodworking technologies.
DelhiWood will attract furniture and kitchen manufacturers, carpenters, saw millers, timber traders and importers,
architects, engineering consultants, builders, architects, interior designers, and fittings and hardware manufacturers and
traders.
PDA Trade Fairs has embarked on a pan-Asia visitor acquisition activity to make the 2017 edition of DelhiWood the
best to date. With a clear objective of ensuring record participation in the upcoming expo, no stone is being left unturned to
give the event wide and sustained publicity.
30,000 square metres of space will host over 450 exhibitors from around
the world, at India Expo Centre & Mart in Greater Noida, 1-4 March, 2017
HIGHLIGHTS AT DELHIWOOD 2017
More than 450 exhibitors from 30 countries
30,000-plus woodworking professionals
500 working machines and production lines spread over 31,000 sq. metres
'Sourcing Forum' for visiting furniture manufacturers
International Timber Congress
Skill Development Programme & Workshops
DelhiWood will be open between 10.30 am and 6.30 pm from 1-3 March, and from 10.30 am to 6 pm on 4 March
2017. This show is only open to trade professionals and visitor entry is free of charge. Children below the age of 18 years
are not allowed to visit the trade show.
For more information: www.delhi-wood.com
7
from the supported exhibitions
The region’s wood premier destination, Dubai International Wood & Wood Machinery Show
and Dubai International Furniture Accessories & Components & Semi Finished Products
Show (DIFAC) is set to break records as the biggest wood and woodworking machinery trade
show in the Middle East from 7th - 9th of March 2017 in Dubai World Trade Centre.
Organisers of the 12th edition reveal an optimistic outlook for the timber industry,
following a recent report from Deloitte that highlights AED 7.34-trillion GCC construction projects
are in the pipeline with Saudi, UAE and Qatar taking the top three leads.
The Dubai Expo 2020 is likely to generate approximately $23 billion (24.4 percent of Dubai's current GDP) between
the years 2015 and 2021, largely from the construction of large-scale commercial and residential developments including
the Expo 2020 site master plan, according to the report World Expo 2020: Destination Dubai.
Work has already commenced on major tourist and leisure attractions across Dubai with developers continuing to announce
new projects. The majority of these attractions are set for completion before 2020 with a few of the mega projects
lined up to cash in on the Dubai Expo 2020. World Expo event underlying sub-themes which are mobility,
sustainability, and opportunity. This attracts suppliers and developers from all over the world with innovative
technologies using renewable resources such as materials that are accredited as being responsibly sourced, such as FSC
timber, concrete reinforced with timber, bamboo or natural fibres.
A key component of upcoming Dubai WoodShow is hosting the first Middle East ATIBT (International Technical
Tropical Timber Association) Forum in Dubai.
For more information: www.dubaiwoodshow.com
Participants will also share new technologies and renewable
products, display sustainability solutions in the timber industry, and
request governments, civil society, and the private sector to act as
one in safeguarding our forests as our most important resource.
The previous edition of Dubai WoodShow, organised by Strategic
Marketing & Exhibitions, attracted 8,000 high quality trade
professionals from 98 countries and 260 local and
international exhibitors, from the wood and woodworking
machinery industry. The top 5 visiting countries were UAE,
Kuwait, Pakistan, India and Oman. Participating exhibitors
included 500 brands, suppliers and manufacturers.
DUBAI WOODSHOW 2017
8
from the supported exhibitions
FITECMA:
AVAILABLE CREDIT LINES MAKE EASIER THE
INDUSTRY’S TECHNOLOGICAL RENEWAL
For more information: www.fitecma.com.ar
Technology increasingly determines the course for companies’ competitiveness. The technological evolution applied to the industrialization of wood products is continuous. More flexible machines and processes achieve rapid improvement in productivity and quality responding to customization, a trend reinforced in recent times. More than 120 exhibitors representing more than 350 domestic and foreign brands will be present at FITECMA – International Fair of Wood & Technology – 13th edition, to be held from June 13th to 17th, 2017, at Centro Costa Salguero, in Buenos Aires City, making it the largest and most varied “shop window” for machines, equipment, tools, supplies and state-of-the-art products and services for the wood and furniture industry. Specific elements for construction in wood and technology applied for thermal energy generation with forest biomass for industrial and residential use will complete a comprehensive offer for each of the sectors involved in the wood-furniture value chain. The availability of funding lines generated as of July, 2016 with the sanction of Act No. 27,264 “Production Recovery Program”, better known as “SME Act”, creates favorable conditions in order that industry companies may face a process of technological advancement to achieve improvement in production, quality and competitiveness of their products. As examples of this we can find the “Line 400” of Banco Nación (Bank of the Argentine Nation) and Banco Provincia (Bank of the Province of Buenos Aires) with credits for production investment plus working capital, covering 100 per cent for the purchase of new capital goods; “FONDEAR” financing up to 80 per cent of the total project; the “Tax Rebate Scheme” given by different banks with tax rebates; “FONOPYME” covering up to 70 per cent of project; “PRODEPRO” with rate rebate for credits given by BICE (Bank of Investment and Foreign Trade).
9
from the supported exhibitions
LISDEREVMASH: BENEFIT FROM GROWING BUSINESS ACTIVITY!
LISDEREVMASH exhibition is considered to be the most important event of the woodworking industry in Ukraine. It
takes place annually in Kyiv and serves as a bridge to the Ukrainian market for foreign companies willing to enter it. On the
other hand, it remains the best business platform for Ukrainian specialists to get acquainted with the recent developments
of the world known equipment manufacturers. This year’s LISDEREVMASH will be held on September 26-29.
In 2016 the leading role of LISDEREVMASH in Ukraine was proven by the significant increase in all key figures of the
event. It reflected a growing business activity on the domestic woodworking market. As compared to previous years
the number of exhibitors grew by 48% and the exhibition space was 46% larger. Along with that the number of
foreign participants doubled in comparison to 2015, and the share of LISDEREVMASH visitors, coming from abroad, was
also noticeably bigger.
Generally, in 2016 LISDEREVMASH was attended by nearly 8,800 visitors from all over Ukraine and CIS countries. For
many years it remains highly attended and is treated as a must see event for specialists, working in the field of forestry,
woodworking and furniture production. And, what is more, LISDEREVMASH is not only about looking but about purchasing
equipment. Owing to its saturated and diverse exposition the event gives a solution for the complete production cycle
in wood processing. Four thematic sections of LISDEREVMASH cover such categories as machines and equipment for
harvesting, primary and secondary wood processing, furniture production technologies, materials and tools, waste wood
recycling, as well as solid biofuel heat generators.
For many years LISDEREVMASH plays an important part for companies from abroad and serves as the best way
to enter domestic woodworking industry. As equipment manufacturers look for new markets with the bigger potential
to grow, more and more of them pay their attention to Ukraine. It does make sense, taking into account new trends. In
2015 the Ukrainian parliament slapped a ban on an export of solid wood in order to provide domestic companies with raw
wood, create higher added value for export goods, and, finally, give impetus to the rise of the national woodworking
industry. This resulted in the need for technical upgrading of local forest districts and wood product manufacturers, and
higher interest in equipment and machines.
Alongside wood processing there is one more section of LISDEREVMASH that is constantly growing for the past few
years. Biofuel exposition WoodEnergy features the latest developments in waste wood recycling, pellets and briquettes
production, and solid biofuel heat generators, giving a chance for woodworking plants and private households to reduce
their spending on natural gas.
To sum up, there is a number of factors that indicate the growing business activity in different areas of Ukrainian
woodworking industry and make this market more and more attractive. And LISDEREVMASH remains the most
convenient way to enter it.
For more information: www.lisderevmash.ua/en
10
from the supported exhibitions
IFMAC: QUALITY INDONESIAN FURNITURE RISES IN GLOBAL DEMAND
Indonesian furniture and handicraft industry is characterised by an environmentally friendly product with unique
characteristics produced by skilled hands and quality craftsmanship. The industry has been traditionally labour-
intensive and supported by commodity-based resources. Rattan was the luxury and iconic product in Europe, highly
sought after by the upper and middle class community who are inclined to furnish their homes with furniture made from
natural rattan.
The main export destinations Indonesian furniture and handicraft are the United States, Japan, Britain, the Netherlands,
Germany, France, Australia, Belgium, South Korea, Italy, Taiwan, United Arab Emirates etc. They liked the furniture and
handicrafts from Indonesia because they have characteristics that are very prominent, with a blend of environmentally
friendly materials, cultural diversity, produced with high skills from qualified craftsmen depicting their cultural diversity, as
well as infused with design innovations that are relatively advanced. These qualities create Indonesian products that are
unique, innovative with international quality standards. That makes the products of Indonesia recognizably and
uniquely different from products from other countries and industry competitors.
With the abundant availability of raw materials, skilled human resources in large quantities and more conducive investment
climate, the industry’s target in boosting export growth of furniture and handicraft products to reach $5 billion worth within
the next five years should be achieved. However, the facts on the ground show that the industry is not strong. The world’s
total furniture exports in 2015 amounted to US $134 billion - this is a significant growth from the previous year that
recorded US$124 billion. Meanwhile, Indonesia’s furniture exports in 2015 only reached US $1.9 billion. This puts
Indonesia’s market position far below Vietnam’s, where its furniture export capabilities was able to achieve an export value
of more than US$6 billion.
One of the obstacles facing the domestic furniture industry is that technological support in terms of tools and machinery use
across local businesses for national production have not been evenly distributed. Currently tools or machinery used are not
of sophisticated level. Therefore, it is necessary to further develop production processes with better technology to
ensure that manufacturers can produce more quickly and efficiently, so that they can compete with foreign manufacturers.
Indonesia is a highly active and strategic market that pushes technological advancements to shape further
development of its furniture manufacturing and woodworking industry. International machinery producers from Europe and
other parts of the world look forward to partner local companies to boost domestic manufacturing capabilities and provide
access for Indonesian companies to enter export markets.
According to Mr. Pierro Borroni from ACIMALL, “Indonesia is an important market and IFMAC provides solid business
prospects for Italian and other international companies to reach newer buyers and sell more high-technology
machines across Asia.” IFMAC and WOODMAC together is a complete furniture manufacturing woodworking exhibition that
presents and meet information needs and promote technological advancement in Indonesia’s furniture industry. For
example, in the area of furniture components, product suppliers can foster innovation and creativity amongst national
furniture and handicraft producers in order to produce superior products that have added value optimal.
From the exhibition, good interactions between the manufacturers and suppliers were established to introduce
appropriate equipment that could ultimately improve the performance of the furniture industry and handicraft Indonesia.
This exhibition is the right arena for businesses of furniture machinery industry to gather and conduct business
transactions. Not only for the machinery side, but also accessories, furniture components and other latest technologies.
Such exhibitions are timely promotional events to bring in new technology to the industry given that almost all of
the machines used in Indonesia’s furniture and handicraft businesses have been in operation for more than 20 years. Given
the long operational use, certainly the level of efficiency and productivity had lagged behind as compared to the current
generation of machines. Through the rejuvenation of the production machinery, furniture and handicraft industries can
boost productivity without adding labour. IFMAC & WOODMAC will return for its 6th edition this year from 27 to 30
September 2017.
11
from the supported exhibitions
WOOD PROCESSING MACHINERY AND INTERMOB FAIRS
SET RECORD UPON RECORD: 71,581 VISITORS
TÜYAP recently reunited suppliers and exporters in the wood and furniture with domestic and international professionals in
the sector for the Wood Processing Machinery and Intermob Fairs. Running concurrently from 22 to 26 October
2016, the fairs succeeded in again breaking their own lofty records. The fairs set new marks with large-scale
participation from both Turkey and abroad, welcoming 71,581 visitors from 103 countries to events featuring 861 firms
from 30 countries.
The Wood Processing Machinery and Intermob Fairs, the biggest platform in Eurasia bringing together the wood and
furniture supplier industries, were held simultaneously between 22 and 26 October 2016 at the TÜYAP Fair Center. The
fairs, which drew 861 firms and firm representatives from 30 countries to events in an enclosed space spread over 12
hectares, received top marks from sector representatives attending the gathering.
While welcoming a total of 71,581 visitors, the fairs drew 7,698 international professional hailing from 103
countries. The event, which was the source of great interest from abroad and which attracted a who’s who of domestic and
international firms and firm representatives, drew participants from Austria, Belgium, Britain, Bulgaria, Canada, China, the
Czech Republic, Denmark, Finland, France, Germany, Greece, Iran, Israel, Italy, the Netherlands, Poland, Portugal, Russia,
Samoa, Slovenia, South Korea, Spain, Sweden, Switzerland, Taiwan, Turkey, Ukraine and the United States who enjoyed
five days during which they were introduced to the latest products.
Purchasing delegations come together to develop sector
With the aim of contributing to the growth of the sector, purchasing delegations from a total of 27 countries, including
Azerbaijan, Bosnia and Herzegovina and Russia, which were invited as special guests of TÜYAP, convened at the Wood
Processing Machinery and Intermob Fairs alongside counterparts from 46 provinces in Turkey. During the fairs,
sector professionals from Turkey and overseas signed a number of important cooperation documents to foster growth in the
sector.
Top marks from sector representatives
At the same time, the activities organized during the simultaneous Wood Processing Machinery and Intermob Fairs
drew great interest from sector representatives. “The Adventure of Wood Design,” an event jointly organized by the
Chamber of Forest Engineers (OMO) and the Woodwork Industry Engineers Association (AEMDER), attracted a large number
of participants.
Intermob’s new special section, Promatt launched successfully
In its launch year, Promatt, Intermob’s new section to showcase materials and machinery for mattress manufacturing,
managed to bring together Turkey’s leading companies with mattress manufacturers from MENA, CIS, and Balkans.
Promatt delivered a promising trade platform for the industry and the launch was appraised a success by both
exhibitors and visitors.
Same place next year
The Wood Processing Machinery and Intermob Fairs, which succeeded in expanding their marketing network in the
interests of presenting new markets to the sector, are set to foster important new business connections next year from 14
to 18 October 2017 while providing an influential trade platform for players seeking to expand into new markets and
increase their share in the current market.
12
from the supported exhibitions
“Your partner to success” - the 12th Vietnam International Woodworking Industry Fair (VietnamWood) will be held from
Oct. 18th – 21st, 2017 at Saigon Exhibition and Convention Center (SECC). VietnamWood is organized by Ministry of
Industry & Trade - Vietnam National Trade Fair & Advertising Joint Stock Company (VINEXAD) and Yorkers Trade &
Marketing Service Co., Ltd. and exclusively endorsed by European Federation of Woodworking Machinery Manufacturers
(EUMABOIS).
Keep Growing from 2001 until now
VietnamWood was the first woodworking exhibition in Vietnam and successfully held 11 editions, now it becomes the
largest woodworking exhibition in Vietnam. VietnamWood keeps breaking its own records beginning with 153 exhibitors
from 13 countries to 280 exhibitors from 25 countries, 330 booths to 610 booths and 13,688 visitors to 16,000
visitors since 2001 until now. The exhibition scale grows twice and keeps growing in this edition.
Strong International Supporters
Except for the long history in Vietnam, VietnamWood is also built strong connection with many local and
international association including Handicraft and Wood Industry Association (HAWA), Vietnam Timber and Forest
Product Association (VIETFOREST), Vietnam Forest Corporation (VINAFOR), European Federation of Woodworking Machinery
Manufacturers (EUMABOIS), Taiwan Woodworking Machinery Association (TWMA), German Woodworking Machinery
Manufacturers’ Association (VDMA), Italian Woodworking Machinery and Tools Manufacturer’s Association (ACIMALL),
Spanish Association of Woodworking Machinery (AFEMMA) and American Hardwood Export Council (AHEC).
Bright Future for Woodworking Industry
The industry is expecting an annual growth rate of 15-20 percent. Vietnam is viewing as next world’s factory. It’s your
last chance to grasp the chance to enter the potential market. The exhibit space of VietnamWood 2017 is nearly 75% sold
and are expecting to extend the exhibit space with tentative halls. In VietnamWood 2017, with the new comers
from China, such as Nanxing Machinery Co., Ltd the largest woodworking machinery in China is expecting to exhibit over
300 sq.m in 2017. You can see more advanced machinery, technique and services from worldwide. It is expected
to reach over 12,000 visitors for coming Vietnamwood.
Supporters:
European Federation of Woodworking Machinery Manufacturers (EUMABOIS)
Taiwan Woodworking Machinery Association (TWMA)
German Woodworking Machinery Manufacturer’s Association (VDMA)
Italian Woodworking Machinery and Tools Manufacturer’s Association (ACIMALL)
Spanish Association of Woodworking Machinery (AFEMMA)
American Hardwood Export Council (AHEC)
Handicraft and Wood Industry Association (HAWA)
Vietnam Timber and Forest Product Association (VIETFOREST)
Vietnam Forest Corporation (VINAFOR)
Show Management: Chan Chao International Co., Ltd.
General Information
Date:
2017 Oct. 18th – 20th (09:00-17:00)
2017 Oct. 21st (09:00-16:30)
Venue: Saigon Exhibition & Convention Center (SECC)
Address: 799 Nguyen Van Linh Parkway, Tan Phu Ward, Dist.7, Ho Chi Minh
City, Vietnam
Organizers: Ministry of Industry & Trade - Vietnam National Trade Fair &
Advertising Joint Stock Company (VINEXAD)
Yorkers Trade & Marketing Service Co., Ltd.
13
from the supported exhibitions
WOOD-TEC 2017 WILL FEATURE WOOD-TEC ARENA AND AN EXHIBIT
COMPETITION
The WOOD-TEC International Fair for Wood Processing and Furniture Industry is the most important fair for the
woodworking and furniture industries in the Czech Republic and Slovakia. Its next edition will be held at the Brno
Exhibition Centre from 31 October to 3 November 2017.
WOOD-TEC will be a prestigious fair this year,too. According to the information received by the organizers at meetings with
exhibitors, obviously very frequently are represented the two main nomenclature groups – wood processing machines and
components for furniture production.
The sidelineprogram of this year's WOOD-TEC will feature again the WOOD-TEC ARENA as a major space for most
parts of the sidelineprogramme. In 2015, it appeared for the first time and met with a great acclaim from the visitors,
who appreciated mainly the opportunity to learn about news from the industry and combine a visit to the exhibition with
education. Exhibitors appreciated quality background facilities and the conceptual design of the commercial
presentation system.
An Exhibit Competition will have its first run in 2017. Its aim is to give exhibitors the opportunity to highlight
advanced exhibits, news and interesting items. The competition is being prepared with partners from professional
associations of the wood processing industry and universities.
For more information: www.bvv.cz/wood-tec
14
from the supported exhibitions
XYLEXPO 2018:
THE DATES FOR THE NEXT EDITION ARE SET
For more information: www.xylexpo.com
The dates announced at the end of the previous editions have now been confirmed for the next Xylexpo, the biennial
international exhibition of woodworking technology and furniture industry supplies, celebrating its 26th edition. The event
will take place in the Fieramilano-Rho fairgrounds, from Tuesday 8 to Saturday 12 May 2018. The location remains the
same, reaffirming the collaboration between the city of Milan and the exhibition, which dates back to the origins of the trade
fair in 1968, as much as fifty years ago! The 50th anniversary is a major milestone that will be properly celebrated.
The timeframe of the exhibition has also been confirmed, spanning five days as requested by a vast majority of exhibitors,
who want to have enough time to spend with their partners and customers. Such request has become even stronger
following the excellent results of the past edition, where the leading brands of woodworking technology achieved record
levels of order acquisitions during an international exhibition.
“We have all got down to work for the next edition with fresh enthusiasm”, said Lorenzo Primultini, president of the
exhibition and Acimall, the association of Italian manufacturers directly involved in the organization of Xylexpo. “Our recent
story demonstrates that Xylexpo has a clear role and position in the international exhibition calendar. It is the top showcase
for panel processing technology, this is an undisputable vocation that drives us, as organizers, to pay utmost attention to all
territories where woodworking technology is applied. To illustrate the different expressions of our industry, we are
developing a few significant initiatives”.
The industry is experiencing a sort of “second youth”, with several regions around the world going back to economic
situations similar to the pre-crisis period. “We are confident that Xylexpo’s fiftieth anniversary will be combined with an
excellent seasons for the global markets”, added Dario Corbetta, director of Xylexpo. “Current figures indicate a positive
trend of the Italian market, which is not only an industry leader offering world-class technology, but also a “consumption
market” that draws the attention of all global vendors”.
“The widespread return to pre-crisis order and revenue levels – Corbetta continued – will be a powerful driver for exhibitors,
who will bring their best technology to Milan to match the demand of a more and more dynamic global market. This is an
opportunity to show your skills and capacity in one of the most mature and stimulating user markets, where you can do
“good business”, as well as meet and discuss with many important and popular brands from all over the world. We are not
talking only about design, but also high-quality mass production for the world’s giants of furniture retail and trade".
So, Xylexpo is an exhibition that always gives answers to exhibitors and visitors, from the buyers of big brands looking for
technology to support high-volume production, up to handicraft businesses willing to upgrade the technological standards of
their “workshop”.
A long tour of meetings and press conferences will start soon to illustrate the highlights of the next edition to all industry
actors.