newturf installation guide newturf lawns for life. · 2018-08-12 · newturf lawns for life....
TRANSCRIPT
Newturflawns for life.
Australia’s coolest, softest synthetic turf.
www.newturf.com.au
Distributed by
Newturf installation guideFollow these step-by-step instructions to install your Newturf lawn.
80mm
60mm
15-20mm
80mm
60mm
15-20mm
Using a rope or hose, layout the proposed area. Excavate the area to a depth of 80mm. Sprinklers may be capped or removed at this stage.
When joining rolls of grass together, be sure to use the Newturf Joining Tape along the seams. Using a 3mm tooth tiling trowel, apply Newturf Exterior Grade Glue evenly along Joining Tape as you go.
1 4
80mm
60mm
15-20mm
80mm
60mm
15-20mm
Lay 80mm of crushed rock/roadbase and compact with vibrating plate. The level of crushed rock/roadbase, when compacted, should be 15-20mm below “finished height” of surrounding edging/paving.
2 5
80mm
60mm
15-20mm
80mm
60mm
15-20mm
Lay your Newturf lawn grass, making sure you start from one edge and roll out. Cut the over-hanging quantities with a sharp Stanley knife. Remove the ‘salvage’, black strip, from both sides of the grass. This cannot be used to join the grass.
Top dress the grass with an even sprinkling of fine, dry “eco-fill” silica sand to a thickness of 15-20mm. A broom can be used at this stage to sweep in the sand evenly and to also brush the grass blades straight and vertical.
3 6
Attention. Do not attempt to lift the grass by yourself. It is advised that the rolls be cut into manageable lengths before shifting. Always run grass in one direction. Ask for our formulae sheet for help to work out required amount of “eco-fill”. Caution: This product may become warm in direct sunlight. Please check the surface temperature before walking on it with bare feet. The installation information has been supplied as a reference guide only. No representations or warranties are made regarding the installation information.
Newturf Solutions Head OfficeUnit 3, 347 Bay Road, Cheltenham VIC 3192Phone: 1300 JUST GRASS (1300 587 847) or (03) 9078 1313www.newturf.com.au
Once you have covered the complete area, simply nail all of the perimeters down at 500mm intervals using 150mm flat head nails. This must also be applied to the joining seams.
Direct from our factory to your;Garden, Lawn, Golf Green, School Oval, Pool Surround, Tennis Court, Nature Strip...
You’ll be pleased you made the Newturf choice.
“ Thank you Newturf, no more mud through the house. No more mowing and with the Cool Turf we’ll have a lawn for life. Chris and I are amazed at
how much more the kids are playing outside. Thanks for the great job - no mess and no fuss. The family love the Newturf lawn (including the dog).
Rachelle T. Black Rock”When you choose a Newturf lawn you can rest easy. Our lawns are 100% safe, manufactured to Australian standards in our Melbourne factory. Guaranteed 100% lead free, they are soft to touch and will give you years of worry free use.
We can provide you with all the materials and expertise to complete your DIY project or use our experienced and fully qualified installation team.
Most important of all when you choose a Newturf lawn you are getting an Australian manufacturers backed warranty of up to 10 years. After all, a Newturf lawn is a Lawn for Life.
10 great reasons to install a Newturf lawn
Australian made and owned
Manufactured to suit Australian conditions
Child and pet friendly - soft to touch
Peace of mind Australia wide manufacturers warranty
Australia’s coolest and softest turf for year round comfort
Proudly supporting local industry and local jobs
UV stabilised - colour fast
Competitively price guaranteed!
Products manufactured in Melbourne for over 20 years
DIY supply and installation service
Australia’s
coolest, softest
turf
1
2
3
4
5
6
7
8
9
10