MSM Replacement &Coax Converter

® U.S. Registered TrademarkCopyright © 2001 Honeywell International • All Rights Reserved

NEXLINE PLUS eases analog-to-digital conversion of electronic access controlsystems by replacing Multiple Switch Monitors (MSMs) and providing a junctionthrough which both data and power can be reliably transmitted over existing coaxialcable. NexLine Plus provides the same functionality as the MSM it replaces bymonitoring point signals between four monitor inputs and a NexSentry Star SeriesController. It supports the already installed monitor point wires and allows existingcoaxial cable to transmit data from S-Net devices.

With NexLine Plus, conversion can be a simple three step process. First, replaceMSM with NexLine Plus; the common footprint allows NexLine Plus to fit in exactlythe same location as the MSM. Second, connect the new S-Net reader to NexLinePlus with standard RS-485 wiring. Third, convert the other end of the coaxial run toRS-485 with an inexpensive NexLine coax adapter to which a NexSentry StarSeries Controller can be connected.

����������• Uses existing coaxial cable and monitor point

wire as part of a 32-bitdigital electronic accesscontrol system

• Reliable transfer of powerand data —no additionalwiring required

• Five-pin Phoenix connectorfor S-Net twisted pair

• 16-pin Phoenix connectorfor five monitor inputs

• F-type connector for coax

• Fuse protection

• Supports S-Net protocol forfaster, more reliable data transmissionbetween controller and readers

• Supports inexpensive and easyconversion from DOS-based toWindows NT™ - based securitymanagement systems

• Easy installation andimplementation

• Inexpensive

• Allows customers to benefitfrom NexWatch's advanced 32-bitdigital control technology,including:- Longer read range- Faster read times- Lower-cost command credential- More flexible credential options

• Protects up to 40 percent of the customer’sinitial investment in electronic access controlby allowing existing coaxial cable to supportdigital components

• Supports S-Net protocol for faster, morereliable data transmission betweendevices

92995100019-B

92995100019 -B

��� � ��� ��Construction:

• Sheet metal ESD protected enclosure

• Dimensions: 6 X 7.5 X 1.375 in. (15.24 X 19.05 X 3.49 cm), samefootprint as MSM

• Weight: 15.25 oz. (433 gms)

Environmental:

• Operating temperature range: 20° to 120° F (-7° to 49° C)

• Operating humidity range: 10 to 95%, non-condensing

Power:

• Input voltage: +16 to +28 VDC

• Operating current: .25 amps nominal

• Pass-through current: 2A

Connections:

• One F-type connector for coax

• One five-pin Phoenix connector for S-net twisted pair wires

• One 16-pin Phoenix connector for four monitor inputs and atamper device

Recommended monitor input wiring:

• 22AWG shielded twisted pair Belden 87761 (plenum) orequivalent 2,000 ft. (610 m) maximum length

• 22AWG un-shielded twisted pair Beldon 8443, 8445 orequivalent, 1,000 ft. (305 m) maximum length, noise-freeenvironment

• 24AWG un-shielded twisted pair Alpha 6622 or equivalent, 500ft. (150 m) maximum length, noise-free environment

���� ��� ��• Retrofit locations where coaxial wiring had been used as part of an

electronic access control system

• Upgrade from DOS-based security management systems toNexSentry Manager for Windows NT™ 4

• Applications that require a higher level of communicationprotocol and performance

���������� ������ ���������NexLine Coax Adapter

NexLine provides a link between digital devices and coaxial wiring,supporting transmission of both data and power over the coax.Includes a transceiver chip for maximum wiring flexibility, as well asflexible termination jumpers for mid- and end-of-line connections.Can also be connected directly to the controller. NexLine is anoptimum solution for installations that do not have local power atthe door.

NexStar Multiplexer

A 5-port RS-485 multiplexer that provides a link between aNexWatch controller and multiple RS-485 runs by fully supportinghome-run topology.

���� ������ ��Order # Product name

92043060000 NexLine Plus92043020000 NexLine Coax Adapter92043051000 NexStar

NEXLINE PLUS MSM REPLACEMENT AND COAX ADAPTER

��������������������

EUROPEAN OFFICEBöblinger Straße 17D-71101 SchönaichGermany49-7031-637-78249-7031-637-769 Fax

MAIN OFFICE47102 Mission Falls CourtFremont, CA 94539510 360-7800510 360-7820 Faxhttp://www.nexwatch.com

MIDWEST OFFICE5007 South Howell AvenueMilwaukee, WI 53207414 769-5980414 769-5989 Fax

▲

ReplaceMSM with

NexLine Plus

▲

Keep existing coax

▲

Existing coax

▲

Convertcoax to RS-485

with NexLine

▲

Replaceanalog sensor

withDigiReader

▲

Replace existing controllerwith NexSentry Controller& MIRO option

▲

MSM at door▲

Analog sensorMADE IN U.S.A.Model No. 808SN

SCHLAGE ELECTRONICS

▲

Existing controller

S A M P L E CONVERSION APPLICATION:K e e p e x i s t i n g m o n i t o r i n g p o i n t s a n d c o a x