nexbladexb10j - ncs technologies, inc. · nexbladexb10j • rackmount 7u • supports 2 intel...

2
NexBladeXB10J Rackmount 7U Supports 2 Intel 64-bit Xeon Processors per node, up to 10 blade servers per enclosure Supports up to 40 SATA hard drives Up to 128 GB of DDR3 per node Innovation... Delivered.

Upload: others

Post on 04-Apr-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: NexBladeXB10J - NCS Technologies, Inc. · NexBladeXB10J • Rackmount 7U • Supports 2 Intel 64-bit Xeon Processors per node, up to 10 blade servers per enclosure • Supports up

NexBladeXB10J

Rackmount 7U•Supports 2 Intel 64-bit Xeon Processors •per node, up to 10 blade servers per enclosure Supports up to 40 SATA hard drives•Up to 128 GB of DDR3 per node•

Innovation... Delivered.

Page 2: NexBladeXB10J - NCS Technologies, Inc. · NexBladeXB10J • Rackmount 7U • Supports 2 Intel 64-bit Xeon Processors per node, up to 10 blade servers per enclosure • Supports up

+1 (703) 743-8500www.ncst.com

CPU:

Supports up to two Intel® 64-bit Xeon® processor(s) of same type per node, 2 nodes per blade, up to 10 blades per enclosureLGA 1366 SocketIntel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95WIntel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W

Chipset: Intel® 5500 (Tylersburg) chipsetICH10R + IOH-24D

BIOS: 32Mb SPI Flash EEPROM with AMI® BIOS

System Memory:8x 240-pin DIMM socketsSupports up to 128 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memorySupports up to 32 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory

HDD Support: Intel ICH10R SATA 3.0Gbps ControllerRAID 0, 1 support

I/O Port: SUV (Serial/USB/Video) & KVM Connector

Drive Bay: 2x 2.5" SATA Hot-swap drive bays per node

Graphics: Integrated Matrox G200eW Graphics

Infiniband Support: 4x QDR / DDR (40/20Gb/s) InfiniBand mezzanine HCA (Optional)

Network Controllers:Intel® 82576 Dual-Port Gigabit EthernetIntel® I/OAT 3 support for fast, scaleable, and reliable networkingVMDq support for better performance of virtualization

Gigabit Ethernet Switch / Pass-Through Module:

Supports up to two hot-plug 1/10 Gigabit Ethernet Layer 2/3 switch modules

Management Module: Supports one hot-plug management modules providing remote KVM and IPMI 2.0 functionalities

Power Supply: Two or four hot-swap 2500W power supplies, N+1 redundant

Dimensions: 12.1" x 18.5" x 29" (HxWxD)

Form Factor: 7U Rackmount

Cooling: Up to 16 cooling fans

Operating Environment: Operating Temperature: 10º to 35º C (50º to 95º F), Non-Operating Temperature: -40º to 70º C (-40º to 158º F)

Innovation... Delivered.