next generation composite panel rooflights/media/files/daylight...compatible with all composite...
TRANSCRIPT
www.brettmartin.com
Energysaver composite panel rooflights provide quality natural daylight in buildings constructed with composite roofing panels. The triple skin rooflight, with a patented thermal membrane, has a U-value of 1.9W/m2K with options as low as 0.9W/m2K, well exceeding the thermal requirements of Part L of the Building Regulations. With full BBA certification these innovative rooflights offer unique features as standard and have been Tried, Tested and Trusted to deliver quick and easy installation, optimum performance and long-life reliability and reassurance.
Compatible with all composite panel roofing systems Energysaver is a factory assembled insulating rooflight (FAIR) and each unit is designed to meet the project specific needs. They are manufactured from Trilite GRP and offer a naturally diffused daylight which is more evenly dispersed than other plastic glazing materials. Distracting shadows, solar glare and hot spots can be eliminated making them ideal for a multitude of industrial, commercial and leisure applications. Delivered to site ready to fit in Ecopac ‘green’ weather protective packaging, Energysavers are light in weight and robust against site handling providing every convenience and potential to save time and labour on site.
Each rooflight is manufactured to tight tolerances to meet the project specification. Standard Energysavers exceed regulatory requirements but where additional performance is required a range of options is available – see table overleaf.
• Factories• Warehouses• Distribution centres• Retail outlets• Sports halls
• Diffused natural daylight• Compatible with all composite roofing systems• Standard features built in for quick and easy installation to save on labour• Reliable ‘fit and forget’ trouble free installation• Thermally insulating• Part L compliant with U-values as low
as 0.9W/m2K• Tailored to project specification • BBA certified• Robust and durable for long-life expectancy • Same depth as composite roof panels for
flush interior styling
APPLICATIONS
PITCHED ROOFS
Next Generation
for the best quality Daylight and Long-Life Performance
Composite Panel Rooflights
NO
N-F
RAGILE WEATHER SHEET
UNDERLAP STRIP TM
PATE
NTED THERMAL MEM
BRA
NE
REI
NFORCED END FILLERSUPERLIFE
• UV protection for 25 year plus life expectancy
HA
RDPA
KTM INTERNAL SUPPO
RT
• Extremely rigid supports positioned to allow fixing over purlins
• Allows fasteners to be tightened with minimal risk of ‘dishing’ around fastener, avoiding water ‘ponding’ for optimum weather tightness
• Thermally insulating
• Achieves Class B non-fragility
• Adds robustness to minimise flexing and damage during site handling
• Specially profiled to match corrugation along the length of the rooflight
• Allows installer to use standard stitching screws when fixing in an underlap condition to metal composite roof panel
• Ensures reliable installation
KEY BENEFITS
KEY FEATURES
APPLICATIONS
OPTIONS
All reasonable care has been taken in the compilation of the information contained within this literature. All recommendations on the use of our products are made without guarantee as conditions of use are beyond the control of Brett Martin. It is the customer’s responsibility to ensure that the product is fit for its intended purpose and that the actual conditions of use are suitable. Brett Martin Daylight Systems pursues a policy of continuous product development and reserves the right to amend specifications without prior notice. Energysaver is a registered trademark of Brett Martin Ltd.
Full installation details can be found in Technical Bulletins 124 and 125.
Butyl tape Silicone GRP and Polycarbonate Sheets
Foam FillersTapes & Sealants
STANDARD ENERGYSAVER OTHER SPECIFICATION OPTIONS
PROPERTY STANDARD ENERGYSAVER
ADDITIONAL SPECIFICATION OPTIONS
NOTES
Thermal performance (U-value)
1.9W/m²K (from triple skin construction)
1.3, 1.0 or 0.9W/m²K 1. Cleartherm intermediary layer
Material GRP
Outer sheet weight Trilite 2.4kg/m² or3.0 kg/m²
Heavier sheet weights: Trilite Ultra 3.6kg/m², 4.5kg/m² or Safelight (5.5kg/m²)
2. Provides longer life, increased rigidity
Non fragility when new (impact resistance)
Class B to ACR[M]001:2005
Expected period of non-fragility
Trilite 2.4 kg/m² - 5-20 yearsTrilite 3.0 kg/m² - 25 years
Heavier sheet weights: Trilite Ultra (3.6kg/m² and 4.5kg/m²) and Safelight (5.5kg/m²) – 30 years
See note 2. above
Colour Natural clear translucent Tints and colour options 3. Add aesthetic interest and can reduce light transmission levels
Light transmission 65 - 70% diffused 55-65% on heavier sheet weights Tints and colour sheets – contact Technical Department
G-value 0.59 0.52 to 0.59 (heavier sheet weights)
Total shading co-efficient 0.67 0.59 to 0.67 (heavier sheet weights)
Life expectancy(UV Protection)
25 years - weathersheets have ‘Superlife’ enhanced UV protection
Diamond protection option (standard on Safelight) and optional on other sheet weights
4. Warranty on durability for 30 years5. Optimum protection against weathering, UV degradation and chemical attack
Fire rating: Weathersheet Liner
SAB to BS 476 part 3Class 1 to BS 476 part 7
All ratings up to and including Class 0 (as defined by Building Regulations and BS 476 part 6)
Internal supports Hardpak™ 50mm wide 100mm wide 6. Allows greater tolerance to purlin positioning
7. If purlin spacings variable, option of Universal FAIR – see opposite.
Underlap strip™ Symmetrical fully profiled galvanised metal strip
• Butyl 6x5mm sealant for side lap and end lap sealing• Butyl 8mm bead sealant should be used for the end
laps on Energysavers with heavier weight sheets• Clear silicone on the tail of lap if required
Correct installation of Energysaver composite panel rooflights is important to ensure they achieve the correct level of safety performance and give long term weather tightness. Brett Martin recommends the following accessories to ensure compliance with the Energysaver guarantee:
A universal composite panel rooflight option with continuous internal support structure allows fasteners to be positioned at any point along the length of the rooflight.
• Avoids need for intermediate fillers• Ideal where purlin spacing is unknown
or variable• U-value of 2.2W/m²K
Brett Martin Daylight Systems also supplies a range of GRP and polycarbonate sheet for site assembled single and built up applications together with a full range of accessory products including:
• Profiled foam fillers to suit all profiles
• Tapes (air sealing, expanding, anti-vibration, cold bridging, barrier, mastic)
• Sealants (gun and strip sealants)
Brett Martin Daylight Systems LtdTel +44 (0) 24 7660 2022Fax +44 (0) 24 7660 2745Email [email protected]
www.brettmartin.com
WARRANTIES
INSTALLATION
ACCESSORIES SITE ASSEMBLED ROOFLIGHTS
UNIVERSAL COMPOSITEPANEL ROOFLIGHT