nfpa 70e - ion/apex electric · nfpa-70e nfpa stands for the national fire protection association....
TRANSCRIPT
![Page 1: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/1.jpg)
NFPA
70E Electrical Shock
and Arc Flash
Awareness
Training
![Page 2: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/2.jpg)
Course Objectives To provide an awareness of the hazards associated with
electrical work, provide and understanding of the energized
electrical work permit, and to train workers how to select the
appropriate personal protective equipment needed to perform
work safely.
![Page 3: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/3.jpg)
Electrician's Safety References
National Electrical Code
(NFPA 70)
NFPA-70E OSHA
Sets the foundation for
electrical safety in
residential, commercial,
industrial occupancies.
Contains comprehensive
regulations for electrical
wiring, overcurrent
protection, grounding, and
installation of equipment
Created by Congress to
assure safe and
healthful working
conditions for working
men and women by
setting and enforcing
standards and by
providing outreach,
education and
assistance.
Addresses employee
workplace electrical
safety requirements.
Focuses on practical
safeguards that also
allow workers to be
productive within their
job functions.
![Page 4: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/4.jpg)
A FEW FACTS
There are several other
NFPA standards.
There are several other
NFPA-70 standards
The E in the standard is
simply a sub-code
designation. It does not
stand for electrical.
NFPA-70E
![Page 5: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/5.jpg)
NFPA-70E
NFPA stands for the National Fire Protection Association.
Its history dates back to 1911 as a sponsor to the National Electrical Code.
In 1976, the NFPA formed a new electrical standards development committee at the request of OSHA to develop an electrical safety standard. The purpose of this consensus standard is to provide a practical safe working area for employees relative to the hazards arising from the use of electricity.
OSHA has not adopted NFPA 70E due to a lengthy and expensive process, however, OSHA uses NFPA 70E in enforcement actions to serve as evidence of whether an employer acted reasonably. Employers and employees are expected to comply with it’s standards.
A FEW MORE FACTS…
![Page 6: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/6.jpg)
NFPA-70E
This standard is comprised of 3
chapters.
Chapter 1 Safety-Related Work Practices
Chapter 2 Safety-Related Maintenance
Requirements
Chapter 3 Safety Requirements for
Special Equipment
This standard also contains 16 annexes
(A-P)
BRIEF SUMMARY OF THE LAYOUT…
![Page 7: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/7.jpg)
NFPA-70E Chapter 1 Safety-Related Work Practices
Chapter 2 Safety-Related Maintenance Requirements
Chapter 3 Safety Requirements for Special Equipment
Annexes A-P
![Page 8: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/8.jpg)
Terms and Definitions NFPA
National Fire Protection Association
NEC
National Electrical Code
OSHA
Occupational Safety and Health Administration
Electrically Safe Working Condition
A state in which an electrical conductor or circuit part has been disconnected from energized parts, locked/tagged in accordance with established standards, tested to ensure the absence of voltage and grounded if determined necessary.
![Page 9: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/9.jpg)
Arc Flash
A dangerous condition associated with the possible release of
energy cause by an electric arc.
Shock Hazard
A dangerous condition associated with the possible release of
energy caused by contact or approach to energized electrical
conductors or circuit parts.
Terms and Definitions
![Page 10: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/10.jpg)
Stay focused Arc Incident
What lead to the incident?
How could it have been avoided?
![Page 11: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/11.jpg)
A state in which an electrical conductor or circuit part has
been disconnected from energized parts, locked/tagged in
accordance with established standards, tested to ensure the
absence of voltage and grounded if determined necessary.
Electrically Safe Working Condition
![Page 12: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/12.jpg)
Electrically Safe Working Condition
130.2. Energized electrical conductors and circuit parts shall
be put into an electrically safe work condition before an
employee performs work if any of the following conditions
exist:
The employee is within the limited approach boundary
The employee interacts with equipment where conductors or
circuit parts are not exposed but an increased likelihood of injury
from an exposure to an arc flash hazard exists.
![Page 13: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/13.jpg)
(1)
If your work takes you
beyond this boundary, or…
(2)
If there is a chance by
interacting with the
equipment you could
cause an arc.
De-energize, lock it out and verify it is off.
![Page 14: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/14.jpg)
The boundaries shown
here are greatly
exaggerated, we will
discuss these
boundaries in more
detail later in this
training.
![Page 15: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/15.jpg)
Electrically
Safe Working
Condition
The safest way to
approach energized work
is to turn it off, lock it out
and verify it is off. This may
take more planning and
discipline, but eliminating
the risk is the safest
approach.
![Page 16: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/16.jpg)
Electrically
Safe Working
Condition
In most cases substituting
electrical equipment and/or
engineering around the
hazard is not an option for
us. We can use
elimination, administrative
controls, and Personal
Protective Equipment.
![Page 17: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/17.jpg)
De-energized
Free from any electrical connection to a source of potential difference and from electrical charge; not having a potential different from that of the earth.
Energized
Electrically connected to, or is, a source of voltage.
Exposed (as applied to energized electrical conductors or circuit parts).
Capable of being inadvertently touched or approached nearer than a safe distance by a person. Its is applied to electrical conductors or circuit parts that are not suitably guarded, isolated, or insulated.
Terms and Definitions
![Page 18: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/18.jpg)
Energized Work 130.2(A)(1),(2),(3) Lists 3 circumstances that permit work be
performed without placing equipment into an electrically safe
working condition.
Additional Hazards or Increased Risk
Infeasibility
Less than 50 Volts
![Page 19: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/19.jpg)
Energized Work
Additional Hazards or Increased
Risk.
Energized work shall be permitted
where the employer can
demonstrate that de-energizing
introduces additional hazards or
increased risk.
Informational Note: Examples of additional hazards or increased risk include, but
are not limited to, interruption of life –support equipment, deactivation of
emergency alarm systems, and shutdown of hazardous location ventilation
equipment.
![Page 20: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/20.jpg)
Energized Work Infeasibility
Energized work shall be
permitted where the employer
can demonstrate that the task
to be performed is infeasible in
a de-energized state due to
equipment design or
operational limitations.
Examples of work that might be performed within the limited approach boundary
of exposed energized electrical conductors or circuit parts because of infeasibility
due to equipment design or operational limitations include performing diagnostics
and testing (for example, start up or troubleshooting) of electric circuits that can
only be performed with the circuit energized and work on circuits that form an
integral part of a continuous process that would otherwise need to be completely
shut down in order to permit work on one circuit or piece of equipment.
![Page 21: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/21.jpg)
Less than 50
volts
Energized
Work
![Page 22: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/22.jpg)
EEWP
Energized Electrical Work Permit
PPE (Personal Protective Equipment)
Protective clothing or equipment designed to protect the wearer’s body from injury or infection.
Incident Energy
The amount of thermal energy impressed on a surface, a certain distance from the source, generated during an electrical arc event. Incident energy is typically expressed in calories per square centimeter. (cal/cm2)
JHA (Job Hazard Analysis)
A technique that focuses on job tasks as a way to identify hazards before they occur and take steps to eliminate or reduce them to an acceptable risk (This term refers to a process. However, many times the term is use to refer to a form that is used to carry out this process).
Terms and Definitions
![Page 23: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/23.jpg)
Risk assessment
An overall process that identifies hazards, estimates the potential
severity of injury or damage to health, estimates the likelihood of
occurrence of injury of damage to health, and determines if
protective measures are required.
Fault Current
Also known as a short-circuit current, a fault current is a term
used to describe a situation in which the flow of current that is
traveling through an electric circuit is not within a normal range.
Boundary
When an arc flash hazard exists, an approach limit at a distance
from a prospective arc source within which a person could
receive a second degree burn if an electrical arc flash were to
occur (Additionally boundaries also exist to protect from shock
hazards).
Terms and Definitions
![Page 24: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/24.jpg)
(EEWP) Energized Electrical Work Permit 130.2(B)(1) When Required. When energized work is
permitted, an energized electrical work permit shall be
required under the following conditions:
When work is performed within the restricted approach boundary
When the employee interacts with the equipment when
conductors or circuit parts are not exposed but an increased
likelihood of injury from an exposure to an arc flash hazard exists
![Page 25: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/25.jpg)
(1)
If your work takes you
beyond this boundary, or…
(2)
If energized parts are not
exposed, but what you are
doing could result in an
arc flash (i.e. drilling, or
pushing a fish tape into a
panel, cabinet or gear).
If you cannot turn it off, and either of these 2
reasons apply, then you need an Energized
Electrical Work Permit.
![Page 26: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/26.jpg)
The boundaries shown
here are greatly
exaggerated, we will
discuss these
boundaries in more
detail later in this
training.
![Page 27: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/27.jpg)
130.(3) Exemptions to Work Permit. An energized electrical
work permit shall not be required if a qualified person is
provided with and uses appropriate safe work practices and
PPE in accordance with Chapter 1 under any of the following
conditions:
Testing, troubleshooting , and voltage measuring
Thermography and visual inspections if the restricted approach
boundary is not crossed
Access to a and egress from an area with energized electrical
equipment if no electrical work is performed and the restricted
approach boundary is not crossed
General housekeeping and miscellaneous non-electrical tasks if
the restricted approach boundary is not crossed
(EEWP) Energized Electrical Work Permit
![Page 28: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/28.jpg)
Overview of Form
Table 130.4(D)(a) for shock risk assessment (3’6” & 1’)
130.(C)(7)(a) Lists rubber gloves with leather protectors as
shock protection that shall be worn to protect from electric
shock. Gloves must be rated for the voltage for which the
gloves will be exposed.
Wilson’s Calculator for arc flash risk assessment
Calculator to determine incident energy and arc boundaries
Necessary protective equipment (see next slide)
Barricading beyond the arc boundary has advantages.
Tool and equipment storage, freedom to move about, etc.…
Job Hazard Analysis
Not too much, not too little.
(EEWP) Energized Electrical Work Permit
![Page 29: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/29.jpg)
Examples of protective
equipment
![Page 30: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/30.jpg)
Arc Flash Risk Assessment
Incident Energy
The amount of thermal energy impressed on a surface, a
certain distance from the source, generated during an electrical
arc event. Incident energy is typically expressed in calories per
square centimeter. (cal/cm2)
(EEWP) Energized Electrical Work Permit
![Page 31: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/31.jpg)
Think of the amount of heat each group of candles (each calorie amount)
would generate on a single point (1 square centimeter) on your finger tip for
one second. Incident Energy is measured based on a similar principle.
1 cal/cm2
3 cal/cm2
7 cal/cm2
Ouch!!! cal/cm2
![Page 32: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/32.jpg)
Incident energy during an arc event is affected by:
Available fault current
Clearing time of upstream overcurrent protective device. (how
much time the arc has to come thru; the quicker the trip time, the
better)
Wire size (smaller wire, more resistance decreases the energy)
Wire distance (distance provides resistance)
Whether a transformer involved in the system. (Generally, voltage
is induced in transformers. As a result there is no physical link to
carry potential energy from the primary system thru the
transformer).
(EEWP) Energized Electrical Work Permit
![Page 33: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/33.jpg)
Incident energy can be calculated using the Wilson’s
Calculator which is based on 2 formulas in the NFPA 70E
annex D.
We need to know incident energy levels to protect
ourselves from the dangers of an arc event.
Superior Glove Incident Energy video
What is Arc Flash
(EEWP) Energized Electrical Work Permit
![Page 34: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/34.jpg)
Arc Flash boundaries
Also can be calculated using Wilsons Calculator
Can also be determined by using the Tables 130.7©(15)(A)(b)
and 130.7©(15)(B) according to equipment and electrical system.
(ac or dc).
Anyone inside the arc flash boundary must have on the
appropriate Personal Protective Equipment.
(EEWP) Energized Electrical Work Permit
![Page 35: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/35.jpg)
Examples of protective
equipment
![Page 36: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/36.jpg)
If your work exposes you
to exposed energized
parts inside this boundary
you need arc rated
protective clothing and
equipment.
This is not a place for the customer or general
contractor. Don’t take chances.
![Page 37: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/37.jpg)
The boundaries shown
here are greatly
exaggerated, we will
discuss these
boundaries in more
detail later in this
training.
![Page 38: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/38.jpg)
Arc Flash boundaries
Arc Flash Safety Boundaries video
(EEWP) Energized Electrical Work Permit
![Page 39: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/39.jpg)
Arc Flash Boundary.
Everyone inside this
boundary needs arc
rated PPE and
equipment
When dealing with exposed energized parts or
verifying equipment is de-energized
![Page 40: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/40.jpg)
Limited Approach
Boundary. Primarily a
shock boundary but
could place you inside
the arc boundary as well.
Therefore, everyone
inside this boundary
needs arc rated PPE and
also protection against
shock. This worker
needs to be qualified to
work around energized
equipment or
accompanied by a
qualified worker.
When you cannot establish an electrically safe
working condition and are dealing with exposed
energized parts or verifying equipment is de-
energized.
![Page 41: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/41.jpg)
Restricted Approach
Boundary. Primarily a
shock boundary but will
place you inside the arc
boundary as well.
Therefore, everyone
inside this boundary
needs arc rated PPE and
also protection against
shock. This worker
needs to be qualified to
work around energized
equipment. An EEWP
and JHA needs to be
completed.
When you cannot establish an electrically safe
working condition and are dealing with exposed
energized parts or verifying equipment is de-
energized.
![Page 42: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/42.jpg)
(EEWP) Energized Electrical Work Permit Blank forms will be inside
the black boxes on site.
A sample form will be provided for Senior Foremen, Project Managers, Safety Supervisors to use as a guide.
Completed forms should be filed in the black box.
Calculations and new forms will be provided as needed.
![Page 43: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/43.jpg)
Equipment Labeling
DuraLabel Label video (what is Arc Flash?)
130.5(D) Electrical equipment such as switchboards,
panelboards, industrial control panels, meter socket
enclosures, and motor control centers that are in other than
dwelling units and that are likely to require examination,
adjustment, services, or maintenance while energized shall
be field-marked with a label containing all the following
information:
Nominal system voltage
Arc Flash boundary
At least one of the following:
Available incident energy and corresponding working distance, or the
arc flash PPE category for the equipment
Minimum arc rating of clothing
Site-specific level of PPE
![Page 44: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/44.jpg)
Exception. Labels applied prior to September 30, 2011 are
acceptable if they contain the available incident energy or
required level of PPE.
Equipment Labeling
![Page 45: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/45.jpg)
If a label such as this is available, we can use it as a guide in selecting
the correct Personal Protective clothing and arc rated equipment.
Labels and Insulated tools
![Page 46: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/46.jpg)
AIC Amperage Interrupting Capacity
Current Rating
Terms and Definitions
![Page 47: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/47.jpg)
Amperage Interrupting Capacity (AIC) The amperage interrupting capacity (AIC) of a circuit breaker
is the maximum short circuit current at which the breaker will
safely interrupt the circuit. The AIC is at the related voltage
and frequency.
In other words above this amperage, the breaker will either blow
apart or weld shut.
The amperage interrupting capacity (AIC) and the current
rating of a device differ in that:
The current rating Is based on the maximum current the device
will carry continuously without exceeding the specified limits of
observable temperature rise.
![Page 48: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/48.jpg)
AIC rating
This device will either blow apart or weld shut during a fault in
which the incident energy reaches above 10,000 amperes.
Current rating
![Page 49: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/49.jpg)
It is always good practice to check surrounding equipment to verify the
equipment you are working on has a trustworthy AIC rating.
Again what affects incident energy?
Incident energy during an arc event is affected by:
(1) Available fault current
(2) Clearing time of upstream overcurrent protective
device. (how much time the arc has to come thru; the
quicker the trip time, the better)
(3) Wire size (smaller wire, more resistance decreases
the energy)
(4) Wire distance (distance provides resistance)
(5) Whether a transformer involved in the system.
(Generally, voltage is induced in transformers. As a
result there is no physical link to carry potential energy
from the primary system thru the transformer).
![Page 50: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/50.jpg)
MDP
65 KA 65 XFMR
22
22
10
75 ft.
125 ft.
15 ft. 10
ft.
Each breaker in MDP rated for 65 KA. 10 ft. and 15 ft. of
distance to panels in same electrical room. One has a
transformer in between. 75 ft. and 125 ft. of distance to
panels in field.
These rating appear trustworthy as the transformer and
distance cut down on available fault current.
![Page 51: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/51.jpg)
MDP
65 KA 22
22
Transformer
22
10
75 ft.
125 ft.
15 ft. 10
ft.
XFMR
Suspicious?
Each breaker in MDP rated for 65 KA. 10 ft. of distance to panels
in same electrical room. One has a transformer in between. 75 ft.
and 125 ft. of distance to panel in field.
Not much distance between the 65 KA rated breaker in the MDP
and the 22 KA rated panel. Is it realistic to assume the AIC should
be calculated at only 22ka? What has impeded the incident
energy? Overcurrent protective device?
![Page 52: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/52.jpg)
Amperage Interrupting Capacity (AIC)
Using standard AIC ratings
and Wilsons calculator, we
can quickly determine
incident energy levels in the
field.
Table H.3(b) requires that
protective clothing and
equipment should be worn at
and above 1.2 cal/cm2.
Above this amount of
energy a worker will
experience 2nd degree
burns.
![Page 53: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/53.jpg)
10ka at 208v=0.67cal/cm2
14ka at 208v=0.87
18ka at 208v=1.05
22ka at 208v=1.23
25ka at 208v=1.35
42ka at 208v=2.01
45ka at 208v=2.11
65ka at 208v=2.79
Amperage Interrupting Capacity (AIC)
![Page 54: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/54.jpg)
10ka at 240v=0.71 cal/cm2
14ka at 240v=0.92
18ka at 240v=1.12
22ka at 240v=1.31
25ka at 240v=1.45
42ka at 240v=2.17
45ka at 240v=2.29
65ka at 240v=3.05
Amperage Interrupting Capacity (AIC)
![Page 55: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/55.jpg)
10ka at 480v=1.05 cal/cm2
14ka at 480v=1.44
18ka at 480v=1.81
22ka at 480v=2.18
25ka at 480v=2.45
42ka at 480v=3.96
45ka at 480v=4.22
65ka at 480v=5.92
Amperage Interrupting Capacity (AIC)
![Page 56: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/56.jpg)
Breakdown for AIC to EEWP & PPE quick glance
<10ka
Need EEWP & JHA
Usually below 1.2 cal/cm2
Shock is the greater of the two hazards
22ka> at 208 volt; 14ka at 480 volt>
Usually above 1.2 cal/cm2
Need EEWP & JHA
Need shock and arc protection
Usually need HRC 2 equivalent clothing
Amperage Interrupting Capacity (AIC)
![Page 57: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/57.jpg)
42ka> Need EEWP & JHA
Usually above 1.2 cal/cm2
Need shock and arc protection
Usually need HRC 4 equivalent clothing
Need involvement of the Safety Director
PPE possibly reduced depending on extensive research of
system.
Amperage Interrupting Capacity (AIC)
![Page 58: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/58.jpg)
Arc Rating
The value attributed to materials that describes their performance
to exposure to an electrical arc discharge. The arc rating is
expressed in cal/cm2 and is derived from the determined value of
the arc thermal performance value (ATPV) or energy of break
open threshold (EBT) (should a material system exhibit a break
open response below the ATPV value). Arc rating is reported as
either ATPV or (EBT) whichever is the lower value.
ATPV
Arc Thermal Performance Value
Terms and Definitions
![Page 59: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/59.jpg)
Incident Energy Analysis Method
Arc rated clothing and other PPE shall be selected and used by the employee based on the incident energy exposure associated with the specific task.
Categories Method
The use of Tables 130.7©(15) and 130.7©(16) for the selection of arc flash PPE
Hierarchy
A system or organization in which people or groups are ranked one above the other according to status or authority.
EEWP
Energized Electrical Work Permit
Terms and Definitions
![Page 60: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/60.jpg)
Arc Rated Personal Protective Equipment
Arc Rating video
When selecting clothing look for the (ATPV) Arc Thermal
Performance value, not just Fire Resistant.
Informational Notes:
ATPV is defined as the incident energy on a material or multilayer
system of materials that results in a 50% probability that sufficient
heat transfer through the tested specimen is predicted to cause
the onset of a second degree burn injury.
Ebt is defined as the incident energy on a material or material
system that results in a 50% probability of break open. (causing
a hole or opening).
![Page 61: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/61.jpg)
Arc Rated
Personal
Protective
Equipment This means if you have
clothing that exactly
matches your incident
energy level, you have a
50% probability of
sustaining 2nd degree
burns.
![Page 62: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/62.jpg)
Arc Rated
Personal
Protective
Equipment This is why according to
the hierarchy of risk
control, Personal
Protective Equipment is
considered the least
effective means to control
hazardous energy.
![Page 63: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/63.jpg)
Turn it off
![Page 64: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/64.jpg)
130.5(C)(1),(2)
When energized work must be performed, one of the
following methods shall be used for the selection of PPE.
Incident Energy Analysis Method
Arc Flash PPE Categories Method
Arc Rated Personal Protective Equipment
![Page 65: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/65.jpg)
The primary method used by Ion Apex employees will be the
incident energy analysis method.
This can be accomplished by using Wilson’s Calculator, or by
using the AIC ratings on the overcurrent protective device.
By means of this method, we can determine:
(1) the right protective equipment to use,
(2) know the available incident energy for the EEWP,
(3) know the arc boundary for the EEWP
Arc Rated Personal Protective Equipment
![Page 66: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/66.jpg)
These next slides will demonstrate the proper way to don the
arc rated equipment at each level using the incident energy
analysis method along with the Table H.3(b).
Arc Rated Personal Protective Equipment
![Page 67: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/67.jpg)
Long sleeve cotton shirt
Rubber gloves with leather protectors
Hearing protection
Safety glasses
Face shield (as needed)
Hard hat
cotton jeans
Below 1.2, and
generally at <10KA
![Page 68: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/68.jpg)
Arc rated long sleeve shirt
Hearing protection
Face shield (as needed)
Safety glasses
Hard hat
Rubber gloves with leather protectors
cotton jeans
Cotton t-shirt
Variation of first picture.
Below 1.2, and generally
at 10ka depending on
clearing times.
![Page 69: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/69.jpg)
Hard hat, arc-rated face
shield, arc rated balaclava,
safety glasses, hearing
protection
Rubber gloves with leather protectors
Equal to or
greater than arc-
rated coverall
Leather footwear
In our case with our
coveralls, 1.2 cal/cm2>
&<10 cal/cm2 or at 22KA
@ 240v or 14KA @ 480v
![Page 70: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/70.jpg)
Rubber gloves with leather protectors
Leather footwear
Hard hat, arc-rated face
shield, arc rated balaclava,
safety glasses, hearing
protection
Equal to or greater
than arc-rated pants
Equal to or greater
than arc-rated long
sleeve shirt
Cotton t-shirt
Variation to previous
picture. In our case with
our coveralls, 1.2
cal/cm2> &<10 cal/cm2 or
at 22KA @ 240v or 14KA
@ 480v
![Page 71: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/71.jpg)
Rubber gloves with leather protectors
Equal to or greater
than arc-rated flash
suit hood, hard hat,
safety glasses
Equal to or greater
than arc-rated flash
suit
Leather footwear
Hearing protection
According to 70E this is
the PPE for above>12
cal/cm2
With our coveralls it
would be above 10 cal.
Or 42KA>. Contact the
Safety Supervisor.
![Page 72: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/72.jpg)
Other Precautions 130.6(A)(2) When impaired. Employees shall not be
permitted to work within the limited approach boundary of
energized electrical conductors or circuit parts operating at
50 volts or more, or where other electrical hazards exist,
while their alertness is recognizably impaired due to illness,
fatigue, or other reasons.
![Page 73: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/73.jpg)
Other Precautions 130.6(B) Blind Reaching. Employees shall be instructed not to
reach blindly into areas that might contain exposed energized
electrical conductors or circuit parts where an electrical hazard
exists.
130.6(D) Conductive Articles Being Worn. Conductive articles of
jewelry and clothing (such as watchbands, bracelets, rings, key
chains, necklaces, metalized aprons, clothes with conductive
thread, metal headgear, or metal frame glasses) shall not be worn
within the restricted approach boundary or where they present an
electrical contact hazard with exposed energized electrical
conductors or circuit parts.
![Page 74: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/74.jpg)
130.6(L) Routine Opening and Closing of Circuits. Load rated
switches, circuit breakers, or other devices specifically designed as
disconnecting means shall be used for the opening, reversing, or
closing of circuits under load conditions. Cable connectors not of the
load-break type, fuses, terminal lugs, and cable splice connections
shall not be permitted to be used for such purposes, except in an
emergency.
Other Precautions
![Page 75: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/75.jpg)
130.6(M) Reclosing Circuits After Protective Device Operation. After
a circuit is de-energized by the automatic operation of a circuit
protective device, the circuit shall not be manually reenergized until
it has been determined that the equipment and circuit can be safely
energized. The repetitive manual reclosing of circuit breakers or
reenergizing circuits through replaced fuses shall be prohibited.
When it is determined from the design of the circuit and the
overcurrent devices involved that the automatic operation of a
device was caused by an overload rather than a fault condition,
examination of the circuit or connected equipment shall not be
required before the circuit is reenergized.
Other Precautions
![Page 76: NFPA 70E - Ion/Apex Electric · NFPA-70E NFPA stands for the National Fire Protection Association. Its history dates back to 1911 as a sponsor to the National Electrical Code. In](https://reader030.vdocument.in/reader030/viewer/2022012316/5bbb6bc409d3f2d6198d53ea/html5/thumbnails/76.jpg)
Conclusion The moral of the story is BE SAFE and NEVER take
chances. One mistake could change you or your family’s life
forever.
Concluding Video
OEL Arc Flash Wear
Test
Practice donning the PPE