nfpa70e 2018 updates - blrinteractive.blr.com/.../nfpa70e_2018_updates-final.pdfelectrical safety in...
TRANSCRIPT
Bulwark®, a brand of VF Imagewear | ©2018 VF Imagewear, Inc.
NFPA 70E CHANGES TO THE 2018 EDITION
®
TABLE CHANGES Listed in Table 130.7 (C) (14) the statement “PPE shall
conform to the standards listed in Table 130.7 (C) (14).”
has been changed to “PPE shall conform to applicable state,
federal, or local codes and standards.” It still lists ASTM
F1506 in the table but it is no longer mandatory to comply
with the standard.
ARC FLASH RISK ASSESSMENT.130.5 Δ (F) Arc Flash PPE. One of the following methods
shall be used for the selection of arc flash PPE:
(1) The incident energy analysis method in accordance
with 130.5(G)
(2) The arc flash PPE category method in accordance
with 130.7(C)(15)
Either, but not both, methods shall be permitted to be used
on the same piece of equipment. The results of an incident
energy analysis to specify an arc flash PPE category in Table
130.7(C)(15)(c) shall not be permitted.
CONFORMITY ASSESSMENT(b) Conformity Assessment.
All suppliers or manufacturers of PPE shall demonstrate
conformity with an appropriate product standard by one
of the following methods:
(1) Self-declaration with a Supplier’s Declaration of Conformity
(2) Self-declaration under a registered quality management
system and product testing by an accredited laboratory
and a Supplier’s Declaration of Conformity
(3) Certification by an accredited independent third-party
certification organization
Informational Note: Examples of a process for conformity
assessment to an appropriate product standard can be found
in ANSI/ISEA 125, American National Standard for Conformity
Assessment of Safety and Personal Protective Equipment.
See Informative Annex H.4.
Bulwark is now ISO 9001 registered and all our AR clothing
meets the second level of conformity. If needed, we will gladly
supply you with test data to support our claim.
If you work in the General Industry, then you’ve likely heard of NFPA® 70E. It’s the industry standard for
electrical safety in the workplace that helps companies and employees avoid workplace injuries and fatalities
due to shock, electrocution, arc flash, and arc blast. This document lays out the requirements for AR garments
to enter the market, including the capabilities and characteristics of the fabrics, the construction of the garment
and more. Read on to learn more about the changes and additions to this important document's 2018 revision.
MORE PEOPLE ARM THEMSELVES WITH BULWARK THAN ANY OTHER FR BRAND.Because only Bulwark brings over 45 years of frontline experience to the realities you face every day.
Subscribe to our monthly newsletter for more information on safety standards, industry insights, product
news and safety tips.
bulwark.com/newsletter