Night Vision Transfer of Technology (TOT(

Proposal Description

Proposal DescriptionServices:

• Supply the knowledge of the Night Vision Equipment• Supply full set of manufacturing documents (drawings)• Supervise upgrade of current facilities according to plans• Provide all manufacturing and testing equipments , and their installation

instructions• The professional personnel (Optics engineers, system engineers, Optical• personnel) will supervise the construction of the production lines from the early

start until it is fully functional– not on a daily basis – periodically as per understanding between the involved sides

• Definition and identification of sub-contractors and qualified vendors for optics, composite, metal material etc.• Provision of a complete Bill of Material for the selected devices (BOM).p()

Deliverables: Selection of the desired Night Vision Equipment .

Night Vision Monocular

Night Vision Goggle

Night Vision Weapon Sight

Survey in your country and infrastructure design.

Production line, testing tools and machinery requirements and BOM

(to be purchased only from recommended suppliers and / or

delivered by us)

Full set of production Files

BOM For each device

On the Job Training (OJT)

Pre-Series Production

System’s Qualification

Series Production

Proposal Description

PVS-14 Advanced Multi-Purpose Scope

Key Features: Standard US Military System

Hand held spotting scope

Hands free mono-goggle (optional helmet mount)

Day/Night weapon sight (attached to an existing rifle

scope with the optional universal adapter)

Surveillance and night-time photography (with the

use of the optional camera adapter) 5

PVS-14 Advanced Multi- Purpose Scope

Specificatio

ns:Magnification 1x (3x or 5x optional)

Lens System 26 mm f1.2

FOV 40°

Range of Focus 25 cm to infinity

Diopter Adjustment +6 to -4

IR Illuminator Yes

Battery Type/LifeAA (x1) / 20 hoursCR123 / 40 hours

Dimensions 107mm x 50mm x 64mm

Operating Temperature

-40°C to +50°C

6There is a variety of scopes. Final selection shall be made jointly

PVS-7 Night Vision Goggle

7

Key Features:

• Standard US Military System

• Gen II , SuperGen, Gen II+ or Gen III + or

• Internal Low Battery and IR Indicators

• Optional 3x & 5x Lenses

• Light Weight

• Combat Proven

There is a variety of Sights. Final selection shall be made jointly

PVS-7 Night Vision Goggles

Specificatio

ns:Magnification 1x

Lens System 26mm f1.2

Field of View 40°

Range of Focus 20 Cm to infinity

Diopter Adjustment + 2 / - 6

Weather Resistant Waterproof up to 3' up to 30 min

IR Illuminator Yes

Battery Type / Life AA (x2) / 40 hours (Min)

Weight 744g

8

D740-4X Night Weapon Sight

Key Features:•Water Proof

•Rugged Military Design

•Light Weight

•Weaver Style Mounting Base

•Red Mil-Dot reticle

•Top Mounted Objective Focus

9

There is a variety of Sights. Final selection shall be made jointly

be made jointly

D740-4X Night Weapon Sight

Specifications:Magnification - X4

Field of View - 8.3°

Objective Lens Focus - 25mm to infinity

Eyepiece Focus - +2 to –5 dioptres

Eye Relief - 30mm

Entrance Pupil - 70mm

Exit Pupil - 7.5mm

Reticle Adjustment - +/- 17mrad

Reticle Type - injected Ballistic (design optional)

Power Supply - AA Alkaline batteries (2 x 1.5v)

Battery Life - 40 hours (nominal) at 20°C

12 hours (nominal) at 0 to -40°C

10

The GOAL

To Set Up Full Tot And Manufacturing

Capability With In 24 Month ARO

Function Description Required SpaceManagement - CEO

- CFO- CTO- VP Marketing - Marketing

100sqm

Production Management - Production Manager- Procurement Manager

20sqm

Production Floor - Technicians- Elctroptic - Electronic - Mechanical

300sqm

QA Optical & Electro-Mechanical

50sqm

Final product storage and deliveries Technician 50sqm

Technical Documentation Technician 30sqmRepair laboratory (after sale services) Technician 30sqm

Stage #1

Survey, Design and Planning of the Core

Facilities & Capabilities:

In this stage we will produce a full SOW (statement of

work) book that will cover all aspect of the projects, will

define the work that will need to be carried in your

country.

The SOW will include comprehensive Planning of the

assembly floor

New Facility Establishment: In this stage will prepare the local facility in your

country according to our plan and will finish the

assembly floor plan.

The basic assembly facility will be installed by us.

We will supply the infrastructure.

** 600 square meter Facility will be able to produce 400-500 devices in a

month.

Stage # 2

Finishing the local facility in your

country:

In this stage we will finish to supply & install all

the necessary equipment that will be needed in

order to produce the 3 NVD's in your country.

We will supply the Test equipments, QA

alignment, bore sighting equipment and Other

Tools

Stage # 3

Optics Lab

Test Equipment

Electro-Optical Equipment for Night Goggles Resolution Test

Electronics and Opto-mechanical   Hot Mock-Up Test Equipment for

 Night Vision Binocular

Electro-Optical Equipment for Night Goggles Amplification Test 

Complete Production and testing files:

We will complete the production and the testing

files Configuration of the specified devices,

including breakdown of the designed

components 3D Design

2D Production DWG

We will provide a full manufacturing book for

the three (3) types of NVG Based Devices.

The manufacturing book will include:

Stage # 4

Stage # 4 Documentation description

Engineering Documentation. (a) Parts List.

(b) Part Electrical Lists .

(c) Part Drawings.

(d) Assembly drawings.

(e) Details of vendor items specifically developed by the OEM for the Licensed Product.

(f) Engineering Change proposals covering details of modifications.

(g) List of components where trace-ability records are important.

(h) Details of environment tests.

(i) Bill of materials and Ordering Specifications

(j) Full technical details of proprietary items.

(k) Material data sheets-chemical composition/mechanical-properties -for all

metallic/non-metallic materials/consumables.

Manufacturing Documentation (a) Process Sheets including details of special processes and finishes.

(b) Complete set of drawings for tooling, jigs and fixtures . .

(c) List of shop consumables with details of specifications; source of procurements data on shelf life.

(d) Assembly tree/sequence, assembly process sheets including assembly settings and checks, assessments to be made, matching sub assemblies, markings.

(e) Any special manufacturing facilities to be set up indicating plant and machinery.

(f) Test equipment

(h) Inspection stages, quality plan, details of inspection equipment, gauges.

(i) Calibration procedures for inspection equipment, gauges, heal treatment & process equipment

(j) Operation Sequence Sheets.

Stage # 4 Documentation description

Stage # 4 Documentation description

Test Documentation (a) Factory Test specification, procedure and acceptance test specification,

(b) Complete set of drawings for manufacture of test jigs including fixtures.

(c) Special category test details (recertification, production series testing, quality assurance Testing.

Technical Manuals Documentation (a) User handbook detailing operational use of equipment

(b) Installation and commissioning manual

(c) Maintenance Manual covering.

(d) Periodic maintenance.

(e) Trouble shooting and fault diagnosis manual.

(f) Recommended Spares List.

Documentation description

Stage # 4 Documentation description

General Documentation (a) Standard inspection method (inward goods in-process and final acceptance).

(b) Process standards/procedures.

(c) Workmanship standards/procedures.

(d) Quality standards/procedures including incoming inspection procedures, quality manuals.

(e) General procedures

(f) Qualified Vendor Lists.

(g) Standard tools, jigs and fixtures.

On the Job Training (OJT):

Our professionals will carry on a local training

During this time our staff will train professional people

to assemble and to support the 3 types NVD.

We will provide 10 kits of any kind at the end of the

construction of the plant

Stage # 5

Program ScheduleARO ARO+10 ARO+12 ARO+14 ARO+18 ARO+20 ARO+24

1 Establish of contract

2 Establish SOW

3 Site survey

4approval of production floor plan

5shipment of production floor hardware & tools

6completion of the production floor

7approval of Specification

8complete of 3D Design

9 manufacturing of samples .

10submitting the manufacturing book and 10 samples of each NVD

11Training in your country

12 full project manager support :

ARO+16 ARO+22ARO+2 ARO+8ARO+6

Contract Signing:

NV Systems Definition:

Assembly, Test, QA alignment / bore sighting Equipment and Other Tools:

SOW

On the Job Training

A top management support:

ARO+4