niit route
TRANSCRIPT
-
7/28/2019 Niit Route
1/7
Implementing Cisco IP Routing (ROUTE)
ID CI-ROUTE Price US$ 3,295 Duration 5 days
WHO SHOULD ATTEND
This course is primarily intended for:
- Network professionals who want to correctly implement
routing based solutions given a network design using Cisco
IOS services and features, where implementation of routing
includes planning, configuring and verification
- The typical job roles for this type of professional are
network engineers, network operations center (NOC)
technical support personnel, or help desk technicians
Other who would find this course useful include:
- Any individual involved in implementation and verification
of routing protocols in the enterprise networks
PREREQUISITES
The knowledge and skills you must have before attending
this course are as follows:
- Knowledge and skill level equal to Cisco CCNAcertification
- Knowledge and experience of the implementation and
verification of enterprise routing and switching technologies
as offered by the ICND1 and ICND2 courses or equivalent
skills and knowledge
Note: In addition to knowledge and skill level equal to Cisco
CCNA certification, it is recommended that you have
practical experience in installing, operating, and
maintaining Cisco routers and switches in an enterprise
environment.
COURSE OBJECTIVES
Upon completing this course, you will be able to:
- Plan and document the configuration and verification of
routing protocols and its optimization in enterprise networks
- Identify the technologies, components, and metrics of
EIGRP to implement and verify EIGRP routing in diverse,
large-scale internetworks based on requirements
- Identify, analyze and match OSPF multiarea routing
functions and benefits for routing efficiencies in network
operations in order to implement and verify OSPF routing in
a complex enterprise network
- Implement and verify a redistribution solution in amulti-protocol network that uses IOS features to control
path selection and loop free topology according to a given
network design and requirements
- Evaluate common network performance issues and
identify the tools needed to provide a layer 3 path control
that uses IOS features to control the path
- Implement and verify a layer 3 solution using BGP to
connect an enterprise network to a service provider
DETAILED COURSE OUTLINE
Module 1: Planning Routing Services to Requirements
Plan and document the configuration and verification of
routing protocols and its optimization in enterprise
networks.
Lesson 1: Assessing Complex Enterprise Network
Requirements
This lesson describes the converged network requirements
of various network and networked applications within the
Cisco network architectures. This will result in the ability to
identify information that must be collected when filling out
an implementation plan. This ability includes being able tomeet these objectives:
- Defining Cisco network models
- Understanding traffic conditions in a converged network
- Understanding Cisco SONA framework
- Understanding routing and routing protocols
Lesson 2: Common Maintenance Processes and
Procedures
This lesson describes the requirements of the enterprise
network, implementation plan and documentation of
implementation process, and its results. This ability
includes being able to meet these objectives:
- Create an implementation plan
- Define the implementation plan tasks
- Develop the implementation plan documentation
- Create an implementation plan example
Lesson 3: Lab 1-1 Debrief
This lesson explains gathering of network requirements and
required data. You will be able to create implementation
plan, verify, and document the whole process. This ability
includes being able to meet these objectives:
- Describe the lab topology and identify the implementation
and verification tasks
- Present the sample solution and identify possiblealternative solutions
Lab
Page 1/7
-
7/28/2019 Niit Route
2/7
Implementing Cisco IP Routing (ROUTE)
- Lab 1-1: Assess skills for implementing complex
networks
Module 2: Implementing an EIGRP based Solution
Identify the technologies, components, and metrics of
EIGRP to implement and verify EIGRP routing in diverse,
large-scale internetworks based on requirements.
Lesson 1: Planning Routing Implementations with EIGRP
This lesson describes the components and metrics of
EIGRP, how EIGRP selects routes between routers in
diverse, large-scale internetworks, the implementation plan
creation process, and basic EIGRP configuration. This
ability includes being able to meet these objectives:
- Understanding EIGRP Capabilities and Attributes
- Understanding EIGRP Operation and Metrics
- Planning and Documenting for EIGRP
- Implementing Basic EIGRP
Lesson 2: Implementing and Verifying Basic EIGRP for the
Enterprise LAN Architecture
This lesson describes how to verify and implement EIGRP
routing. This ability includes being able to meet these
objectives:
- Verifying EIGRP Routes for IPv4
- Verifying EIGRP Operation for IPv4
- Using the Passive-Interface Command with EIGRP
- Advertising an IP Default-Network in EIGRP
- Determining Summary Boundaries
- Utilizing Manual Route Summarization
Lesson 3: Lab 2-1 Debrief
This lesson explains how to configure and verify EIGRP
operations. This ability includes being able to meet these
objectives:
- Identify the implementation and verification tasks for
basic EIGRP configuration and how to influence the EIGRP
path selection- Present the sample solution and identify possible
alternative solutions
Lesson 4: Configuring and Verifying EIGRP for the
Enterprise WAN Architecture
This lesson describes, recognizes, and deploys EIGRP
operation over various WAN technologies and be able to
scale the operation with load balancing and proper
bandwidth utilization. This ability includes being able to
meet these objectives:
- Configuring and verifying EIGRP over Frame Relay and
on a Physical Interface- Configuring and verifying EIGRP over Multipoint
Sub-Interfaces
- Configuring and verifying EIGRP over Point-to-Point
Sub-Interfaces
- Implementing Load Balancing Across Equal-Metric Paths
- Implementing Load Balancing Across Unequal-Metric
Paths
- Determining EIGRP Bandwidth use Across WAN Links
- Implementing EIGRP over Layer 2 and Layer 3 MPLS
VPNLesson 5: Lab 2-2 Debrief
This lesson explains how to configure and verify EIGRP
circuit emulation and Frame Relay operations. This ability
includes being able to meet these objectives:
- Identify the implementation and verification tasks for
basic EIGRP configuration and how to influence the EIGRP
path selection
- Present the sample solution and identify possible
alternative solutions
Lesson 6: Implementing and Verifying EIGRP
Authentication
This lesson describes how to implement and verifyauthentication in an EIGRP network. This ability includes
being able to meet these objectives:
- Determining Router Authentication for EIGRP
- Determining MD5 Authentication for EIGRP
- Implementing MD5 Authentication for EIGRP
- Verifying MD5 Authentication for EIGRP
Lesson 7: Lab 2-3 Debrief
This lesson explains how to configure and verify EIGRP
Authentication. This ability includes being able to meet
these objectives:
- Identify the implementation and verification tasks for
EIGRP authentication over LAN and WAN interfaces
- Present the sample solution and identify possible
alternative solutions
Lesson 8: Advanced EIGRP Features in an Enterprise
Network
This lesson describes how to implement advanced EIGRP
features in an Enterprise Network by applying the planned
implementation processes using correct Cisco IOS
commands and applications as well as verify that the
configuration was correctly implemented. This ability
includes being able to meet these objectives:
- Defining scalability in large networks
- Understanding EIGRP Queries
Page 2/7
-
7/28/2019 Niit Route
3/7
Implementing Cisco IP Routing (ROUTE)
- Defining SIA connections in EIGRP- Understanding EIGRP stub routers
Lesson 9: Lab 2-4 Debrief
This lesson explains how to implement and troubleshoot
EIGRP operations to solve EIGRP adjacency and limited
connectivity. This ability includes being able to meet these
objectives:
- Identify the implementation, verification, and
troubleshooting tasks for EIGRP operations to solve
adjacency and connectivity issues
- Present the sample solution and identify possible
alternative solutions
Labs:
- Lab 2-1: Configure and verify EIGRP operations
- Lab 2-2: Configure and verify EIGRP circuit emulation,
and Frame Relay operations
- Lab 2-3: Configure and verify EIGRP Authentication
- Lab 2-4: Implement and Verify EIGRP operations
Module 3: Implementing a Scalable Multiarea Network
OSPF Based Solution
Identify, analyze, and match OSPF multiarea routing
functions and benefits for routing efficiencies in network
operations in order to implement and verify OSPF routing in
a complex enterprise network.
Lesson 1: Planning Routing Implementations with OSPF as
Scalable Routing Protocol
This lesson explains link state protocols, components and
metrics of OSPF, how OSPF operates, and the
implementation plan creation process. This ability includes
being able to meet these objectives:
- Determining Link-State Routing Protocols
- Determining OSPF Area Structure
- Determining OSPF Adjacency Database
- Calculating the OSPF Metric
- Determining Link-State Data Structures- Maintaining Link-State Sequence Numbers
- Planning for OSPF Implementation
Lesson 2: How OSPF Packet Processes Work
This lesson explains how information flows between routers
to maintain OSPF links and which packets are used. This
ability includes being able to meet these objectives:
- Determining OSPF Packet Types
- Establishing OSPF Neighbor Adjacencies
- Exchanging and Synchronizing LSDB's
- Maintaining Network Routes
- Verifying Packet Flow
Lesson 3: Improving Routing Performance in a ComplexEnterprise Network
This lesson describes the features of various OSPF
network architectures. This ability includes being able to
meet these objectives:
- Introducing OSPF Network Types
- Determining Adjacency Behavior in Point-to-Point Links
- Determining Adjacency behavior in a Broadcast Network
- Determining Adjacency Behavior in a Metro Ethernet and
EoMPLS Network- Determining Adjacency Behavior in MPLS networks
- Selecting a DR and BDR
- Implementing OSPF over Different Frame Relay
Implementations
- Implementing OSPF over Frame Relay NBMA
- Using Sub-Interfaces in OSPF over Frame-Relay
- Implementing OSPF over a Point-to-Point Frame-Relay
Network
- Implementing OSPF over a Point-to-Multipoint
Frame-Relay Network
Lesson 4: Configuring and Verifying OSPF Routing
This lesson explains how to configure OSPF single-area
and multiarea routing as well as several advanced features.This ability includes being able to meet these objectives:
- Initializing Single-Area and Multi-Area OSPF
- Activating OSPF within a Router in Single-Area and
Multi-Area
- Defining the Router ID
- Verifying OSPF Operations
- Identifying LSA Types within the LSDB
- Limiting Adjacencies in OSPF with the Passive-Interface
Command
- Defining Design limitations of OSPF
- Defining OSPF Virtual Links and solving the
non-Contiguous Area Problem
- Changing the Cost Metric
Lesson 5: Lab 3-1 Debrief
This lesson describes how to implement and verify OSPF
to improve routing performance. This ability includes being
able to meet these objectives:
- Identify the implementation, verification and
troubleshooting tasks for OSPF operations over LAN and
WAN interfaces with different frame relay WAN segment
representations
- Present the sample solution and identify possible
alternative solutionsLesson 6: Lab 3-2 Debrief
This lesson describes how to implement and verify OSPF
Page 3/7
-
7/28/2019 Niit Route
4/7
Implementing Cisco IP Routing (ROUTE)
multiarea routing. Additionally manipulation of cost, routerID and routing updates is used to optimize the OSPF
implementation. This ability includes being able to meet
these objectives:
- Identify the implementation, verification and
troubleshooting tasks for OSPF operations in multiarea
over LAN and WAN interfaces with different frame relay
WAN segment representations
- Present the sample solution and identify possible
alternative solutions
Lesson 7: Configuring and Verifying OSPF Route
Summarization
This lesson describes the procedure for configuring OSPFroute summarization for interarea and external routes. This
ability includes being able to meet these objectives:
- Determining OSPF Route Summarization
- Implementing OSPF Route Summarization
- Identifying the Benefits of a Default Route in OSPF
- Using a Default Route in OSPF
Lesson 8: Lab 3-3 Debrief
This lesson describes how to implement and verify OSPF
route summarization for interarea and external routes. This
ability includes being able to meet these objectives:
- Identify the implementation, verification, and
troubleshooting tasks for OSPF route summarization for
interarea and external routes
- Present the sample solution and identify possible
alternative solutions
Lesson 9: Configuring and Verifying OSPF Special Area
Types
This lesson describes how to implement and verify OSPF
area parameters, including stub, totally stubby, NSSA, and
backbone. This ability includes being able to meet these
objectives:
- Determining OSPF Area Types- Defining and Implementing a Stub Area
- Defining and Implementing a Totally Stubby Area
- Interpreting Routing Tables for OSPF Area Types
- Defining and Implementing a Not-So-Stubby-Area and
Totally-NSSA Area in OSPF
- Verifying All OSPF Area Types
Lesson 10: Lab 3-4 Debrief
This lesson describes how to implement and verify OSPF
special area types. This ability includes being able to meet
these objectives:
- Identify the implementation and verification tasks forimplementing the OSPF special area types including stub,
totally-stub, and totally not-so-stubby (NSSA) area
- Present the sample solution and identify possible
alternative solutions
Lesson 11: Configuring and Verifying OSPF Authentication
This lesson describes how to implement authentication in
an OSPF network. This ability includes being able to meet
these objectives:
- Determining Types of OSPF Authentication- Implementing Simple Password Authentication for OSPF
- Configuring MD5 Authentication for OSPF
- Troubleshooting Authentication for OSPF
Lesson 12: Lab 3-5 Debrief
This lesson describes how to implement and verify OSPF
authentication. This ability includes being able to meet
these objectives:
- Identify the implementation and verification tasks for
implementing the OSPF authentication
- Present the sample solution and identify possible
alternative solutions
Labs:
- Lab 3-1: Configure and verify OSPF to improve routing
performance
- Lab 3-2: Implement and verify OSPF multiarea routing
- Lab 3-3: Configure and verify OSPF route summarization
for interarea and external routes
- Lab 3-4: Configure and verify OSPF special area types
- Lab 3-5: Configure and verify OSPF Authentication
Module 4: Implement an IPv4-based Redistribution Solution
Implement and verify a redistribution solution in a
multi-protocol network that uses IOS features to control
path selection and loop free topology according to a given
network design and requirements.
Lesson 1: Assessing Network Routing Performance and
Security Issues
This lesson explains prefix-lists, distribute-lists and
route-maps and how to use them to filter and control
routing update traffic. This ability includes being able to
meet these objectives:
- Determining Common Network Performance Issues
- Identifying How Distribution Lists Work
- Using Distribution-Lists to Control Routing Updates- Identifying How Prefix Lists Work
- Using a Prefix-List to Control Routing Updates
Page 4/7
-
7/28/2019 Niit Route
5/7
Implementing Cisco IP Routing (ROUTE)
- Identifying How Route-Map's Work- Using Route-Map's to Control Routing Updates
- Using Route-Map's to Filter Routes
- Suppressing Routing Updates using Passive-Interface
Lesson 2: Operating a Network Using Multiple IP Routing
Protocols
This lesson explains what route redistribution is and why it
may be necessary. This ability includes being able to meet
these objectives:
- Describing a Complex Routing Network
- Defining Route Redistribution
- Determining Default Metrics for Redistributed Routes
- Determining where to Redistribute- Identifying Caveats of Redistribution
Lesson 3: Configuring and verifying Route Redistribution
This lesson explains how to configure route redistribution
between multiple IP routing protocols. This ability includes
being able to meet these objectives:
- Defining The Examples of Redistribution
- Defining The Administrative Distance Attribute
- Defining Route Redistribution using Administrative
Distance
- Identifying The Impact of using Admin Distance for Route
Manipulation
- Identifying The Redistribution using Route-Maps
- Describing The Route Redistribution using Route-Maps
Lesson 4: Lab 4-1 Debrief
This lesson describes how to configure redistribution
between multiple routing protocols as well as implement
filtering of routes. This ability includes being able to meet
these objectives:
- Identify the implementation and verification tasks for
implementing the redistribution between OSPF and EIGRP
and OSPF and RIPv2 protocols
- Present the sample solution and identify possible
alternative solutionsLab:
- Lab 4-1: Configure route redistribution between multiple
IP routing protocols
Module 5: Implementing Path Control
Evaluate common network performance issues and identify
the tools needed to provide a layer 3 path control that uses
IOS features to control the path.
Lesson 1: Assessing Path Control Network Performance
Issues
This lesson explains common network performance issues
caused by inefficient path control selection and identifywhat resources are needed to best provide a path control
as well as implementation and verification of PBR. This
ability includes being able to meet these objectives:
- Assessing Path Control Network Performance
- Using Filters to Determine Path Selection
- Using PBR to Determine Path Selection
- Configuring and Verifying PBR
- Configuring and verifying PBR Operations on a Cisco
RouterLesson 2: Lab 5-1 Debrief
This lesson explains destination based forwarding and
configures path control using PBR tool. This ability includes
being able to meet these objectives:
- Identify the implementation and verification tasks for
manipulating the path for a selection of the packets
traveling across the network
- Present the sample solution and identify possible
alternative solutions
Lesson 3: References to additional Path Control in
E-Learning
This lesson explains Preview the E-Learning products toteach creating Path Control through additional methods.
This ability includes being able to meet these objectives:
- Implement Path Control by Other Methods
Lab:
- Lab 5-1: Configure and verify Path Control between
multiple IP routing protocols
Module 6: Connecting an Enterprise Network to ISP
Networks
Implement and verify a layer 3 solution using BGP to
connect an enterprise network to a service provider.
Lesson 1: Planning the Enterprise-to-ISP Connection
This lesson justifies the components and methods used to
connect an enterprise network to an ISP. This ability
includes being able to meet these objectives:
- Connecting enterprise networks to an ISP
- Exchanging routing updates with an ISP
- Understanding connection types to an ISP
Lesson 2: Advantages of Using BGP
This lesson explains how to match BGP functionality to
advantages and to the benefits of using BGP to connect an
enterprise network to ISPs. This ability includes being ableto meet these objectives:
Page 5/7
-
7/28/2019 Niit Route
6/7
Implementing Cisco IP Routing (ROUTE)
- Determining How To Use BGP to Connect to an ISP- Understanding BGP Multihoming Options
- Configuring BGP Routing Between Autonomous Systems
- Identifying Path-Vector Functionality
- Identifying Features of BGP
Lesson 3: Comparing the Functions and Uses of EBGP and
IBGP
This lesson explains how to compare and contrast the
requirements for establishing EBGP to IBGP neighbor
relationships. This ability includes being able to meet these
objectives:
- Defining BGP Neighbor Relationships
- Establishing External BGP Neighbor Relationships- Establishing Internal BGP Neighbor Relationships
Lesson 4: Configuring and Verifying Basic BGP Operations
This lesson explains how to implement BGP operations by
receiving an enterprise network and ISP specifications for
connection. This ability includes being able to meet these
objectives:
- Identifying specifications for Implementing BGP
- Establishing Internal and External BGP Neighbors
- Determining How To Shut Down a BGP Neighbor
- Understanding BGP Configuration Considerations
- Identifying BGP Neighbor States
- Implementing Authentication in BGP
- Creating an Example of Activating Basic BGP
- Configuring BGP Verification
Lesson 5: Lab 6-1 Debrief
This lesson explains lab topology, configuration of BGP
operations, create checkpoints for configuration, and
verification, as well as find alternative solutions. This ability
includes being able to meet these objectives:
- Compare your solution, findings, and action log against a
set of checkpoints provided by the instructor and identify
common and alternative solutions
- Consolidate the lessons learned during the reviewdiscussions into a set of best practice methods and
commands to aid you in future troubleshooting procedures
Lesson 6: BGP Attributes and Path Selection Process
This lesson explains how to configure and verify BGP
operations in a multihomed environment using the BGP
attributes and route maps to control the path selection for
all BGP routes from the router. This ability includes being
able to meet these objectives:
- Determining the BGP Path Selection
- Identifying The Characteristics of BGP Attributes for Path
Selection and Path Manipulation- Configuring Filtering of BGP Routing Updates
Lesson 7: Lab 6-2 Debrief
This lesson explains lab topology, configuring of BGP path
manipulation using local preference and MED BGP
attributes, creation of checkpoints for configuration, and
verification as well as alternative solutions. This ability
includes being able to meet these objectives:
- Identify the implementation and verification tasks to
establish BGP adjacency in the network and manipulate theBGP path using local preference and MED BGP attributes
- Present the sample solution and identify possible
alternative solutions
Lesson 8: References to Training on IPv6 and Branch
Office/Remote Workers in E-Learning
This lesson explains Preview the E-Learning products to
teach creating Path Control through additional methods.
This ability includes being able to meet these objectives:
- Implement path control by other methods
Labs:
- Lab 6-1: Configure BGP Operations
- Lab 6-2: Manipulate EBGP Path selections
Page 6/7
-
7/28/2019 Niit Route
7/7
Implementing Cisco IP Routing (ROUTE)
Training Centers worldwide
Fast Lane
1800 Perimeter Park
Morrisville, NC 27560
Tel. (919) 674-3100
[email protected], www.fastlaneus.com
Page 7/7
mailto:[email protected]://www.fastlaneus.com/http://www.fastlaneus.com/mailto:[email protected]