nivelco catalog

2
Low cost polypropylene level switch Hermetically moulded, double chamber Mercury free operated micro switch Direct pump control up to 1.1 kW Adjustable switch differential Low specific weight of the floating body Level switch from drinking water to sewage Suitable also for tanks and basins Fail-safe indication and pump control Switch rating: 250 V AC, 16 A Temperature: 0 °C to +50 °C Pressure: max. 1 bar Protection: IP 68 NIVOFLOAT Low cost level switch Limit switch or differential switch versions Adjustable sensitivity Adjustable time delay High or low fail-safe mode All wetted parts stainless steel Compact unit with two independent relays Separate probe and relay unit Rod probes up to 3 m Conductive liquids with min. 2 x 10 -5 S/cm conductivity Fail-safe indication and pump control Chemical and water industry Switch rating: 250 V AC, 16 A Power supply: 24 V AC/DC, 110, 230 V AC Temperature: -20 °C to +200 °C Pressure: max. 16 bar Process connection: 3/8", 1 1/2" Protection: IP 65, IP 20 NIVOCONT K Operation without power supply Micro-switch separated from the process All wetted parts stainless steel Side or top mounting Fixed or adjustable switch differential Submersible versions Various process connections Operational check via optional tester Explosion-proof models Liquids with min. 0.7 kg/dm 3 density Fail-safe and control level switches in closed tanks Power stations, chemical, petrochemical and pharmaceutical industry Balance tanks on ships Switch rating: 250 V AC, 10 A Temperature: -20 °C to +250 °C Pressure: max. 25 bar Process connection: square and standard flanges, 2” thread Protection: IP 65 Approvals: ATEX II 1/2 G EEx dme IIC T6…T2 Germanische Lloyd Norske Veritas NIVOMAG No moving parts Self-cleaning for most media High immunity against vibrations Stainless steel and ECTFE coated probes Solid rod extension up to 3 m Various output configurations High or low fail-safe mode Plastic, aluminium or stainless steel housing Explosion-proof models Most liquids with min. 0.5 kg/dm 3 density and max. 10000 mm 2 /s viscosity Corrosive, thick, turbulent, flowing liquids Power supply: 20-255 V AC 20-60 V DC Temperature: -40 °C to +130 °C Pressure: max. 40 bar Process connection: 1” or flanges or hygienic fittings Output: 1 or 2 SPDT relays, 2-wire AC or DC, transistor (PNP, NPN) Protection: IP 67 or IP 68 Approvals: ATEX II 1 G EEx ia IIC T4...T6 Germanische Lloyd NIVOSWITCH 2 or 3-wire submersible transmitter Stainless steel body Venting tube in cable Up to 200 m range Reverse polarity protection Optional lightning protection Accuracy: 0.25 or 0.5% Borehole transmitter for the water industry Small diameter pipes Sewage water Power supply: 9-30 V DC Temperature: -10 °C to +60 °C Output: 4-20 mA or 0-10 V Protection: IP 68 Approvals: ATEX II 1 G EEx ia IIC T6 NIVOPRESS NP FLOAT CONDUCTIVITY MAGNETIC COUPLING Operation without power supply Reed switches separated from process Wetted parts stainless steel or plastic Up to 5 switch points Vertical adjustability of all switch points Various process connections Explosion-proof models Liquids with min. 0.5 or 0.8 kg/dm 3 density Multi-point level switch in closed tanks Chemicals with dense vapour or gas layer above the surface Foaming liquids Switch rating: 250 V AC, 3 A Temperature: -40 °C to +150 °C Pressure: max. 25 bar Process connection: 1” or 2” or flanges Protection: IP 65 Approvals: ATEX II 2 G EEx d lIC T3...T6 NIVOPOINT MAGNETIC TRACKING VIBRATION FORK FOR LIQUIDS No moving parts Self-cleaning for most media High immunity against vibrations Stainless steel probes Solid rod extension up to 3 m Various output configurations Selectable density High or low fail-safe mode Plastic, aluminium or stainless steel housing Dust-Ex models Granular material and powder with min.0.01 kg/dm 3 bulk density Corrosive, thick, turbulent, flowing liquids Power supply: 20-255 V AC 20-60 V DC Temperature: -40 °C to +130 °C Pressure: max. 40 bar Process connection: 1", 1 1/2" Output: 1 or 2 SPDT relays, 2-wire AC or DC, transistor (PNP, NPN) Protection: IP 67 or IP 68 Approvals: ATEX II 1/2 D IP6X T160°C NIVOSWITCH VIBRATION FORK FOR SOLIDS HYDROSTATIC 2-wire compact transmitter Stainless steel diaphragm Accuracy: min. 0.5% High overload capability Level and pressure management HART Explosion-proof models Most liquids and masses in tanks and vessels Chemicals with dense vapour or gas layers above the surface Foaming liquids Viscous or corrosive materials Power supply: 12-30 V DC Temperature: -30 °C to +125 °C Pressure: max. 400 bar Output: 4-20 mA, HART Process connection: 1 1/2" or flanges or hygienic fittings Protection: IP 65 Approvals: ATEX II 1 G EEx ia IIC T6...T4 NIVOPRESS DT HYDROSTATIC 2-wire compact transmitter Accuracy: ± 1 mm Rigid or flexible probes up to 10 m Wetted parts: stainless steel or plastic Two floats: interface metering Plug-in field indicator module 32-point linearisation Distance, level and volume measurement HART Explosion-proof models Liquids with min. 0.5 kg/m 3 density Chemicals, solvents, hydrocarbons Flammable liquids Interface metering Custody transfer Power supply: 12-36 V DC Temperature: -40 °C to +130 °C Pressure: max. 25 bar Measuring range: 0.5-10 m Output: 4-20 mA, HART Process connection: 1", 2" or flanges Protection: IP 67 Approvals: ATEX II 1G EEx ia IIB T6...T4 II 2G EEx d IIB T6...T4 II 1/2G EEx d ia IIB T6...T4 NIVOTRACK MAGNETO- STRICTIVE Two-wire compact transmitter Low or high frequency versions High sensitivity Rod or cable probes up to 20 m Fully or partly insulated probes Plug-in field indicator module 32-point linearisation Distance, level and volume measurement HART Explosion-proof models Liquids, powders, granules with ε r > 1.5 relative dielectric constant Chemicals with dense gas layers above the surface Viscose or corrosive mediums High pressure, high temperature or vacuum Power supply: 12-36 V DC Temperature: -30 °C to +200 °C Pressure: max. 40 bar Output: 4-20 mA, HART Process connection: 1", 1 1/2" or flanges Protection: IP 67 Approvals: ATEX II 1G EEx ia IIB T6 NIVOCAP CAPACITIVE Long service time Motor shut-off feature Flexible coupling Sealed bearings High temperature range True fail-safe version Dust-Ex models Granular material and powder with min. 80 kg/m 3 density High or low fail-safe Feed, coal, sand, rocks, limestone, metals, rubber Power supply: 12 V DC, 24 V DC, 24 V AC, 48 V AC, 115 V AC, 230 V AC Temperature: -50 °C to +400 °C Pressure: max. 2 bar Process connection: 1" BSP, 1 1/4"NPT, 1 1/2" BSPT Output: Relay (SPDT) Protection: IP 66 Approvals: ATEX II 1/2 D EEx c T 100 °C II 1/2 D IP65 T 85 °C NIVOROTA ROTARY PADDLE 2- or 4-wire compact transmitter Non-contact level metering Narrow 5° beam angle Temperature compensated Excellent signal processing via QUEST + software PP, PVDF, PTFE, stainless steel or foam faced transducers Plug-in field indicator module Secondary lightning protection HART, RS 485 Power relay output Explosion-proof models Almost any liquids or free flowing solids Level, volume and open channel flow Reliable measurement in challenging applications such as vapour/fume stirrer, foam with liquids or dusting during filling with solids Power supply: 2-wire: 12-36 V DC 4-wire: 85-255 V AC 11.4-40 V DC, 3.6 W 11.4-28 V AC, 4 VA Temperature: -30 °C to +100 °C Pressure: 0.3 to 3 bar Measuring range: 0.2 - 25 m for liquids 0.6 - 60 m for solids Output: 4-20 mA, relay, HART, RS 485 Protection: IP 67 Approvals: ATEX II 1 G EEx ia IIB T6 II 1/2 D IP65 T130°C EchoTREK ULTRASONIC No moving parts Self-cleaning for most media Stainless steel vibrating section Solid rod or flexible cable extension up to 20 m Plastic or aluminium housing Selectable density High or low fail-safe mode Selectable switching delay Dust-Ex models Granular material and powder with min. 0.05 kg/dm 3 bulk density Grain, flour, plastic gran- ules, cement, fly ash, etc Power supply: 16-40 V AC / 19-55 V DC 85-265 V AC / 120-375 V DC Temperature: -40 °C to +160 °C Pressure: max. 25 bar Process connection: 1 1/2" Output: Relay (SPDT) or electronic switch (SPST) Protection: IP 67 Approvals: ATEX II 1/2 D IP 65 T NIVOCONT R VIBRATION ROD FEATURES APPLICATIONS SPECIFICATIONS OPERATING PRINCIPLE PRODUCT 2- or 4-wire compact transmitter Non-contact level metering Low cost Narrow 5° beam angle Temperature compensated Excellent signal processing via QUEST + software PP, PVDF housing Secondary lightning protection HART Power relay output Explosion-proof models Most liquids Level, volume and open channel flow Reliable measurement in challenging applications such as vapour/fume stirrer and foam with liquids or dusting during filling with solids Where IP 68 is needed Power supply: 2-wire: 12-36 V DC 4-wire: 11.4-40 V DC, 3.6 W 11.4-28 V AC, 4 VA Temperature: -30 °C to +60 °C Pressure: 0.3 to 3 bar Measuring range: 0.2 - 15 m for liquids 0.5 - 60 m for solids Output: 4-20 mA, relay, HART, RS485 Protection: IP 68, IP 65 Approvals: ATEX II 1G EEx ia IIB T6 II 1D IP68 T130°C EasyTREK ULTRASONIC

Upload: inc-technical

Post on 16-Mar-2016

219 views

Category:

Documents


5 download

DESCRIPTION

INC Technical and Nivelco pressure, level, flow solutions catalog.

TRANSCRIPT

Page 1: Nivelco Catalog

Low cost polypropylenelevel switchHermetically moulded,double chamberMercury free operatedmicro switchDirect pump controlup to 1.1 kWAdjustable switch differentialLow specific weightof the floating body

Level switch from drinkingwater to sewageSuitable also for tanksand basinsFail-safe indication andpump control

SSwwiittcchh rraattiinngg::250 V AC, 16 ATTeemmppeerraattuurree::0 °C to +50 °CPPrreessssuurree::max. 1 barPPrrootteeccttiioonn::IP 68

NIVOFLOAT

Low cost level switchLimit switch or differentialswitch versionsAdjustable sensitivityAdjustable time delayHigh or low fail-safe modeAll wetted partsstainless steelCompact unit with twoindependent relaysSeparate probe andrelay unitRod probes up to 3 m

Conductive liquids withmin. 2 x10-5 S/cm conductivityFail-safe indication andpump controlChemical and water industry

SSwwiittcchh rraattiinngg::250 V AC, 16 APPoowweerr ssuuppppllyy::24 V AC/DC, 110, 230 V ACTTeemmppeerraattuurree::-20 °C to +200 °CPPrreessssuurree::max. 16 barPPrroocceessss ccoonnnneeccttiioonn::3/8", 1 1/2"PPrrootteeccttiioonn::IP 65, IP 20

NIVOCONT K

Operation withoutpower supplyMicro-switch separatedfrom the processAll wetted partsstainless steelSide or top mountingFixed or adjustableswitch differentialSubmersible versionsVarious process connectionsOperational check viaoptional testerExplosion-proof models

Liquids with min. 0.7 kg/dm3

densityFail-safe and control levelswitches in closed tanksPower stations, chemical,petrochemical andpharmaceutical industryBalance tanks on ships

SSwwiittcchh rraattiinngg::250 V AC, 10 ATTeemmppeerraattuurree::-20 °C to +250 °CPPrreessssuurree::max. 25 barPPrroocceessss ccoonnnneeccttiioonn::square and standardflanges, 2” threadPPrrootteeccttiioonn::IP 65AApppprroovvaallss:: ATEX II 1/2 G EEx dme IIC T6…T2Germanische LloydNorske Veritas

NIVOMAG

No moving partsSelf-cleaning formost mediaHigh immunity againstvibrationsStainless steeland ECTFE coated probesSolid rod extensionup to 3 mVarious output configurationsHigh or low fail-safe modePlastic, aluminium or stainless steel housing

Explosion-proofmodels

Most liquids with min. 0.5 kg/dm3 density andmax. 10000 mm2/s viscosityCorrosive, thick, turbulent,flowing liquids

PPoowweerr ssuuppppllyy::20-255 V AC20-60 V DC

TTeemmppeerraattuurree::-40 °C to +130 °CPPrreessssuurree::max. 40 bar

PPrroocceessss ccoonnnneeccttiioonn::1” or flanges orhygienic fittingsOOuuttppuutt:: 1 or 2 SPDT relays,2-wire AC or DC, transistor (PNP, NPN)PPrrootteeccttiioonn::IP 67 or IP 68AApppprroovvaallss:: ATEXII 1 G EEx ia IIC T4...T6Germanische Lloyd

NIVOSWITCH

2 or 3-wire submersibletransmitterStainless steel bodyVenting tube in cableUp to 200 m rangeReverse polarity protectionOptional lightning protectionAccuracy: 0.25 or 0.5%

Borehole transmitter for thewater industrySmall diameter pipesSewage water

PPoowweerr ssuuppppllyy::9-30 V DCTTeemmppeerraattuurree::-10 °C to +60 °COOuuttppuutt::4-20 mA or 0-10 VPPrrootteeccttiioonn:: IP 68AApppprroovvaallss::ATEX II 1 G EEx ia IIC T6

NIVOPRESS NP

FLOAT CONDUCTIVITY MAGNETICCOUPLING

Operation without powersupplyReed switches separatedfrom processWetted parts stainlesssteel or plasticUp to 5 switch pointsVertical adjustability of allswitch pointsVarious process connectionsExplosion-proof models

Liquids with min. 0.5 or 0.8 kg/dm3 densityMulti-point level switchin closed tanksChemicals with densevapour or gas layerabove the surfaceFoaming liquids

SSwwiittcchh rraattiinngg::250 V AC, 3 ATTeemmppeerraattuurree::-40 °C to +150 °CPPrreessssuurree::max. 25 barPPrroocceessssccoonnnneeccttiioonn::1” or 2” or flangesPPrrootteeccttiioonn::IP 65AApppprroovvaallss::ATEX II 2 G EEx d lIC T3...T6

NIVOPOINT

MAGNETICTRACKING

VIBRATION FORKFOR LIQUIDS

No moving partsSelf-cleaning formost mediaHigh immunity againstvibrationsStainless steel probesSolid rod extensionup to 3 mVarious output configurationsSelectable densityHigh or low fail-safe modePlastic, aluminium or stainless steel housingDust-Ex models

Granular material and powder with min.0.01 kg/dm3

bulk densityCorrosive, thick, turbulent,flowing liquids

PPoowweerr ssuuppppllyy::20-255 V AC20-60 V DCTTeemmppeerraattuurree::-40 °C to +130 °CPPrreessssuurree::max. 40 barPPrroocceessss ccoonnnneeccttiioonn::1", 1 1/2"OOuuttppuutt:: 1 or 2 SPDT relays,2-wire AC or DC, transistor (PNP, NPN)PPrrootteeccttiioonn::IP 67 or IP 68AApppprroovvaallss::ATEX II 1/2 D IP6X T160°C

NIVOSWITCH

VIBRATION FORKFOR SOLIDS

HYDROSTATIC

2-wire compacttransmitterStainless steel diaphragmAccuracy: min. 0.5%High overload capabilityLevel and pressure managementHARTExplosion-proof models

Most liquids and masses in tanks and vesselsChemicals with densevapour or gas layers above the surfaceFoaming liquidsViscous or corrosivematerials

PPoowweerr ssuuppppllyy:: 12-30 V DCTTeemmppeerraattuurree::-30 °C to +125 °CPPrreessssuurree:: max. 400 barOOuuttppuutt:: 4-20 mA, HARTPPrroocceessss ccoonnnneeccttiioonn:: 1 1/2" or flanges or hygienicfittingsPPrrootteeccttiioonn:: IP 65AApppprroovvaallss:: ATEX II 1 G EEx ia IIC T6...T4

NIVOPRESS DT

HYDROSTATIC

2-wire compacttransmitterAccuracy: ± 1 mmRigid or flexible probesup to 10 mWetted parts: stainless steel or plasticTwo floats: interface meteringPlug-in field indicatormodule32-point linearisationDistance, level and volume measurementHARTExplosion-proof models

Liquids with min. 0.5 kg/m3

densityChemicals, solvents,hydrocarbonsFlammable liquidsInterface meteringCustody transfer

PPoowweerr ssuuppppllyy:: 12-36 V DCTTeemmppeerraattuurree:: -40 °C to +130 °CPPrreessssuurree:: max. 25 barMMeeaassuurriinngg rraannggee:: 0.5-10 mOOuuttppuutt:: 4-20 mA, HARTPPrroocceessss ccoonnnneeccttiioonn:: 1", 2" or flangesPPrrootteeccttiioonn:: IP 67AApppprroovvaallss:: ATEX II 1G EEx ia IIB T6...T4II 2G EEx d IIB T6...T4II 1/2G EEx d ia IIB T6...T4

NIVOTRACK

MAGNETO-STRICTIVE

Two-wire compacttransmitterLow or high frequencyversionsHigh sensitivityRod or cable probes up to 20 mFully or partly insulatedprobesPlug-in field indicatormodule32-point linearisationDistance, level and volume measurementHARTExplosion-proof models

Liquids, powders, granuleswith εr > 1.5 relative dielectric constantChemicals with dense gaslayers above the surfaceViscose or corrosivemediumsHigh pressure, hightemperature or vacuum

PPoowweerr ssuuppppllyy:: 12-36 V DCTTeemmppeerraattuurree:: -30 °C to +200 °CPPrreessssuurree:: max. 40 barOOuuttppuutt:: 4-20 mA, HARTPPrroocceessss ccoonnnneeccttiioonn::1", 1 1/2" or flangesPPrrootteeccttiioonn:: IP 67AApppprroovvaallss:: ATEX II 1G EEx ia IIB T6

NIVOCAP

CAPACITIVE

Long service timeMotor shut-off featureFlexible couplingSealed bearingsHigh temperature rangeTrue fail-safe versionDust-Ex models

Granular material and powder withmin. 80 kg/m3 densityHigh or low fail-safeFeed, coal, sand, rocks,limestone, metals, rubber

PPoowweerr ssuuppppllyy::12 V DC, 24 V DC, 24 V AC,48 V AC, 115 V AC,230 V ACTTeemmppeerraattuurree::-50 °C to +400 °CPPrreessssuurree:: max. 2 barPPrroocceessss ccoonnnneeccttiioonn:: 1" BSP, 1 1/4" NPT, 1 1/2" BSPTOOuuttppuutt:: Relay (SPDT)PPrrootteeccttiioonn:: IP 66AApppprroovvaallss:: ATEX II 1/2 D EEx c T 100 °CII 1/2 D IP65 T 85 °C

NIVOROTA

ROTARY PADDLE

2- or 4-wire compacttransmitterNon-contact level meteringNarrow 5° beam angleTemperature compensatedExcellent signal processingvia QUEST+ softwarePP, PVDF, PTFE, stainlesssteel or foam facedtransducersPlug-in field indicatormoduleSecondary lightningprotectionHART, RS 485Power relay outputExplosion-proof models

Almost any liquids or freeflowing solidsLevel, volume and openchannel flowReliable measurement inchallenging applicationssuch as vapour/fumestirrer, foam with liquids or dusting during filling with solids

PPoowweerr ssuuppppllyy::2-wire: 12-36 V DC4-wire: 85-255 V AC

11.4-40 V DC, 3.6 W11.4-28 V AC, 4 VA

TTeemmppeerraattuurree::-30 °C to +100 °CPPrreessssuurree:: 0.3 to 3 barMMeeaassuurriinngg rraannggee::0.2 - 25 m for liquids0.6 - 60 m for solidsOOuuttppuutt:: 4-20 mA, relay,HART, RS 485PPrrootteeccttiioonn:: IP 67AApppprroovvaallss:: ATEX II 1 G EEx ia IIB T6II 1/2 D IP65 T130°C

EchoTREK

ULTRASONIC

No moving partsSelf-cleaning formost mediaStainless steelvibrating sectionSolid rod or flexible cableextension up to 20 mPlastic or aluminium housingSelectable densityHigh or low fail-safe modeSelectable switching delayDust-Ex models

Granular material and powder withmin. 0.05 kg/dm3 bulkdensityGrain, flour, plastic gran-ules, cement, fly ash, etc

PPoowweerr ssuuppppllyy::16-40 V AC / 19-55 V DC85-265 V AC / 120-375 V DCTTeemmppeerraattuurree::-40 °C to +160 °CPPrreessssuurree::max. 25 barPPrroocceessss ccoonnnneeccttiioonn::1 1/2"OOuuttppuutt:: Relay (SPDT) orelectronic switch (SPST)PPrrootteeccttiioonn::IP 67AApppprroovvaallss::ATEX II 1/2 D IP 65 T

NIVOCONT R

VIBRATION ROD

FEATURES

APPLICATIONS

SPECIFICATIONS

OPERATINGPRINCIPLE

PRODUCT

2- or 4-wire compacttransmitterNon-contact level meteringLow costNarrow 5° beam angleTemperature compensatedExcellent signal processingvia QUEST+ softwarePP, PVDF housingSecondary lightningprotectionHARTPower relay outputExplosion-proof models

Most liquids Level, volume and openchannel flowReliable measurement inchallenging applicationssuch as vapour/fumestirrer and foam with liquidsor dusting during filling with solidsWhere IP 68 is needed

PPoowweerr ssuuppppllyy::2-wire: 12-36 V DC4-wire: 11.4-40 V DC, 3.6 W

11.4-28 V AC, 4 VATTeemmppeerraattuurree::-30 °C to +60 °CPPrreessssuurree:: 0.3 to 3 barMMeeaassuurriinngg rraannggee::0.2 - 15 m for liquids0.5 - 60 m for solidsOOuuttppuutt:: 4-20 mA, relay,HART, RS485PPrrootteeccttiioonn:: IP 68, IP 65AApppprroovvaallss:: ATEX II 1G EEx ia IIB T6II 1D IP68 T130°C

EasyTREK

ULTRASONIC

Page 2: Nivelco Catalog

Compact sizeGauge or absolute pressureFast output responseStandard plug typeconnectorWide range of processconnections and diaphragms4-20 mA outputPressure ranges: 0.6 to 400 barAccuracy: 0.25% or 0.5%

NIPRESS

PRESSURETRANSMITTER

Switch or transmitterFully temperaturecompensatedIP 67 or IP 68 versionsMetal or PP bodyMagnet or cableprogramming0.2-1 m or 0.4-6 m ranges

MICROSONAR

ULTRASONICPROXIMITY

SENSOR

Suitable interface for devices having 4-20 mA or on-off outputsCan power 2-wire transmittersInput: 4-20 mA or contactRelay (SPDT) outputEmpty / fill controlLimit, differential or window switch capabilitiesProgrammable dampingEx ia models

UNICONT PKK

CURRENTCONTROLLED

SWITCH

Dual channelUp to 4 relaysTransmitter power supply32-point linearisationVarious control algorithmsAuto tuning

UNICONT PMM, PMG

UNIVERSAL PROCESSCONTROLLER /

INDICATOR

2-wire compact transmitterPlug in type indicator andprogramming unitSensor: Pt 100Output: 4-20 mA, HARTMeasurment range:-50 to +600 °CResolution:0.1 °C up to 200 °CProbe length: up to 3 mStainless steel or plasticcoated versionsEx ia and Ex d models

THERMOCONT 400

TEMPERATUREINDICATOR /

TRANSMITTER

General indicatorFor 4-20 mA loop-use,without power supply4–20 mA to HART converterwith power supplyField and panel mountablePlastic/ metal housingScaleableEx ia and Ex d models

UNICONT 400

LOOPINDICATOR

Programmer, indicator andcontroller for transmitterswith HART protocolHighly informative Dot-Matrixdisplay back lightTank visualisationSimple 6-key programming1 to 15 input channelsTransmitter diagnosticcapabilitiesExplosion-proof models

Programmer, indicator andcontroller for singletransmitters and fortransmitter groups

PPoowweerr ssuuppppllyy::11.4-40 V DC, 11.4-28 V ACor 85-255 V ACTTeemmppeerraattuurree::-30 °C to +50 °CIInnppuutt ffrroomm ttrraannssmmiitttteerrss:: HARTOOuuttppuuttss,, iinntteerrnnaall::0 to 2: 4-20 mAcurrent loops0 to 4: SPDT relaysOOuuttppuuttss,, eexxtteerrnnaall::0 to 16: 4-20 mAcurrent loops0 to 64: SPDT relaysCCoommmmuunniiccaattiioonn wwiitthh hhoosstt:: RS 485PPrrootteeccttiioonn:: IP54 or IP65AApppprroovvaallss::ATEX II (1) G [EEx ia] IIB

MULTICONT *

CONTROLLER

2 wire TDR technologyDigital communicationAccuracy: ±5 mmHigh pressureHigh temperature rangeExtremely low dead bandWide range of probesExplosion-proof models

Level, volume or interfacemeasurement Liquids, powders, granuleswith εr > 1.4Medium with turbulentsurface, dense dust, vapouror pressurized gas layersabove the product surfaceFor all tank shapes, for narrow vesselsHeavy industrial applications

PPoowweerr ssuuppppllyy:: 24 V DC,PPrroodduucctt tteemmppeerraattuurree::-30 to +200 °CFFllaannggee tteemmppeerraattuurree::-30 to +200 °CPPrreessssuurree:: 0 to 40 barMMeeaassuurriinngg rraannggee::0 – 24 mOOuuttppuutt::4-20 mA, HARTPPrrootteeccttiioonn:: IP 65AApppprroovvaallss:: ATEX II 1G EEx ia IIC T6,II 1G EEx ia IIB T6,II 1/2D IP65 T100°C

MicroTREK

GUIDEDMICROWAVE

2- or 4-wire FMCWtechnologyTBF mode for low εrDigital communicationField indicator facilityHigh accuracy up to ± 1 mmHigh pressureHigh temperature rangeLow dead bandExplosion-proof models

Level or volumemeasurementLiquids, powders, granules with εr > 1.5Medium with dust, vapouror pressurized gas layersabove the product surfaceHeavy industrial applications

PPoowweerr ssuuppppllyy:: 24 V DC,24 V AC, 100-240 V ACFFllaannggee tteemmppeerraattuurree::-60 to +250 °CPPrreessssuurree::0 to 64 barMMeeaassuurriinngg rraannggee::up to 40 mOOuuttppuutt::4-20 mA (active or passive)HART, Profibus, FF, ModbusPPrrootteeccttiioonn:: IP 67AApppprroovvaallss:: ATEX II 1/2 G EEx ia IIC T6

PiloTREK

NON-CONTACT MICROWAVE

leve

g08a

0619

b

Nivelco Messtechnik GmbHA-2326 Maria Lazendorf

Alois Stumergasse 4Tel.: (43-2235) 47281Fax: (43-2235) 42184

E-mail: [email protected]

Nivelco Bohemia s.r.o.Drážní 7

CZ–62700 Brno-SlatinaTel.: (420-548) 217285Fax: (420-548) 217283

E-mail: [email protected]

SC Nivelco Tehnica Masurarii SRL.

540069 Tg-Mures, Str. Ion Creanga nr. 3/1

Tel.: (00-40) 40-265-306192Fax: (00-40) 40-265-306192

E-mail: [email protected]

Nivelco Poland Sp.z.o.o.ul. Chorzowska 44bPL–44100 Gliwice

Tel.: (48-32) 270 3701Fax: (48-32) 270 3832

E-mail: [email protected]

Nivelco Instruments India Pvt. Ltd.127, Damji Shamji Industrial Complex,

Off Mahakali Caves Road, Andheri(East), Mumbai – 400 093

Tel.: 91-22-26876050Fax: 91-22-26876050

E-mail: [email protected]

������������ ���������� ������������ �� –– ����NNIIVVEELLCCOO – 142092 ����, �.

������ (���. ���.),�����������, ��. 4, � . 424

Tel.: 7 985 960 43 88Fax: 7 501 443 28 22

E-mail: [email protected]

NIVELCO IPARI ELEKTRONIKA ZRT.H-1043 Budapes t , Dugon ics u . 11 .Tel.: (36-1) 8890-100 Fax: (36-1) 8890-200

[email protected]: sales @nivelco.com

www.nivelco.com