no more smoke filled rooms! “it’s not the...

139

Tired of explaining that “it’s not the stove, it’s the chimney”?The Draw Collar™ solves your biggest wood stove problem... SMOKE FILLED ROOMS!

1. Primes the flue before starting the fire

2. Prevents down drafts through the night

3. Maintains chimney draw, keep-ing out cold air when the fire is out

4. Silent (no fan)5. No obstruction in the flue.

DCU-0600 6” Draw CollarDCU-0700 7” Draw CollarDCU-0800 8” Draw CollarDCWI 6” Insert

The Draw Collar™ installs easily in line with the flue pipe, comes in stove pipe black, and plugs into any 110v AC outlet.

Tested in labs of indus-try leaders, the Draw Collar™ heats safely to 450° in no time at all.

Simply replace a twelve-inch section of stove pipe with the Draw Collar. Sometimes this will require cutting a twelve-inch section out of existing flue.

NO MORE SMOKE FILLED ROOMS!

New inserts with second-ary combustion struggle to get enough heat up the flue to create draw. The DCWI is compact enough to fit almost all applications.

The DCWI will generate more than 600 degrees of heat in the flue. It’s built with high grade 304 stainless steel for safety and durability and comes with a built-in thermo-stat control that will shut the heater off once the fire is going and will turn back on when the fire dies down.

140

DCC DOUBLE WALL STOVE PIPE

90° ELBOW

Fixed 90° elbow is used for connecting pipe sections to the chimney system.

Cat No. Size A B6DCC-90-BK 6” 9-1/4” 10”8DCC-90-BK 8” 11-1/4” 12”

ADJUSTABLE LENGTHS - TWO-PIECE TELESCOPING SECTION

DCC-6A Adjustable Length 6-inch secion. Telescopes into pipe section for adjusments from 2-1/2” to 5”.

DCC-18A Adjjustable Length 18” section tele-scopes into pipe section for adjust-ments from 3” to 15”.

DCC-TS5 The two-piece telescoping section 5-foot length Telescopes between stove to supports for adjustments from 3-1/2 feet to 5-1/2 feet.

PIPE SECTION Ameri-Tec® double wall pipe sections fea-ture stainless steel inner liners with easy-to-install and disassemble screw joint assembly.

Cat No. Size ID OD6DCC-12BK 6” 6” 7”8DCC-12BK 8” 8” 9”6DCC-18BK 6” 6” 7”8DCC-18BK 8” 8” 9”6DCC-24BK 6” 6” 7”8DCC-24BK 8” 8” 9”6DCC-36BK 6” 6” 7”8DCC-36BK 8” 8” 9”6DCC-48BK 6” 6” 7”8DCC-48BK 8” 8” 9”

Cat No. Size ID OD6DCC-A-BK 6” 6” 7”8DCC-A-BK 8” 8” 9”6DCC-TS5-BK 6” 6” 7”8DCC-TS5-BK 8” 8” 9”6DCC-18A-BK 6” 6” 7”8DCC-18A-BK 8” 8” 9”

Cat No.6DCC-K-BK8DCC-K-BK

Cat No. Size A B6DCC-T-BK 6” 13” 3”8DCC-T-BK 8” 15” 3”

TEETee is used where stovepipe connection is made at the rear of the appliance.

DOUBLE WALL CONNECTOR KIT The kit includes two 24” pipe sections, one 18” adjustable length and one stove adaptor. Kits are available in 6” and 8” sizes to accomodate vertical installations up to 66”.

STOVE ADAPTER

Six inch high adaptor fits over tall stove collars.

Cat No. Size6DCC-SA-BK 6”8DCC-SA-BK 8”

45° ELBOW

Fixed 45° elbow is used for connecting pipe sections to the chimney system.

Cat No. Size A B6DCC-45-BK 6” 4-1/2” 5”8DCC-45-BK 8” 4-3/4” 6”

INCREASERS/Oval to RoundIncreasers may be used at either the top or bottom of DCC connector systems to increase a 6” DCC to an 8” DCC.

Cat No. Size6XDCC-8 -BK 6” to 8”8DCC-ORA-BK 8” Oval

A

B

7”

6”

A

B

A

B

Call 1-800-522-8216 for Double Wall Black Pipe Catalog

141

Stk. # Size Pk.Stk. # Size Pk.

#600 24 GAUGE 24” PIPE4-24-600 4” 105-24-600 5” 106-24-600 6” 107-24-600 7” 108-24-600 8” 10

#600A 24 GAUGE 12” PIPE4-24-600A 4” 105-24-600A 5” 106-24-600A 6” 107-24-600A 7” 108-24-600A 8” 10

#616 24 GA. BL. DRAW CONNECTOR5-616 5” 66-616 6” 67-616 7” 68-616 8” 6

#611 24 GA. BL. REDUCER - SMALL END CRIMPED5x4-611 5x4” 106x4-611 6x4” 126x5-611 6x5” 127x4-611 7x4” 127x5-611 7x5” 127x6-611 7x6” 128x5-611 8x5” 128x6-611 8x6” 108x7-611 8x7” 12LM6 120mmx6” EA05-124817 125mmx6” EA175R62B 175mmx6” EA175R82B 175mmx8” EA

#612 24 GA. BL. INCREASER - LARGE END CRIMPED4x5-612 4x5” 104x6-612 4x6” 64x7-612 4x7” 125x6-612 5x6” 125x7-612 5x7” 125x8-612 5x8” 126x7-612 6x7” 126x8-612 6x8” 107x8-612 7x8” 12

#610 24 GA. BL. ROUND/OVAL BOOT - 1 PIECE6X6-610 6x6” 12 4 1/2” x 7 3/4”7X6-610 7x6” 6 4 1/2” x 9”7X7-610 7x7” 12 4 3/4” x 8 3/4”8X8-610 8x8” 12 5 1/2” x 11 1/4”

#602 24 GAUGE ADJUSTABLE ELBOW4-24-602 4” 45-24-602 5” 46-24-602 6” 47-24-602 7” 48-24-602 8” 4

#603 24 GAUGE BL. ANGLE 45°5-24-603 5” 46-24-603 6” 47-24-603 7” 48-24-603 8” 4

#604 24 GAUGE BLACK TEE4-604 4” ea5-604 5” ea6-604 6” ea7-604 7” ea8-604 8” ea

#603SE 24 GA. BL. PLUG - CRIMPED4-603SE 4” 125-603SE 5” 126-603SE 6” 127-603SE 7” 128-603SE 8” 12

#603LE 24 GAUGE BLACK TEE CAP4-603LE 4” 125-603LE 5” 126-603LE 6” 127-603LE 7” 128-603LE 8” 12

#605 24 GAUGE TRIM COLLAR4-605 4” 125-605 5” 126-605 6” 127-605 7” 128-605 8” 12

CID CAST IRON DAMPERS3-CID 3” 124-CID 4” 125-CID 5” 126-CID 6” 127-CID 7” 128-CID 8” 1210-CID 10”

#606 24 GA. STARTER CRIMP BOTH ENDS - SEAMED5X5-606 5X4” 66X6-606 6X4” 67X7-606 7X4” 68X8-606 8X4” 6

FLUESTOP-BK BLACK FLUESTOPBM0026 Black 12BM0227 Brass 12BM0353 Almond 12

4#602C 24 GA. BL. CORR. ELBOW 90°BM0022 5” 46-24-602C 6” 4BM0024 7” 48-24-602C 8” 4

BLACK PIPE & FITTINGS

142

Wall Unit & Thimble

Note: SDV wall unit fits Simpson Dura-Vent™ double wall pipe. Order 2 wall units and one thimble for through inside wall application. Illustration shows typical Thru-the-Wall installation. Insulating sleeves protect wall and any adjacent combustibles on both sides. Insulating thimble isolates wall itself - helps prevent overheating of wood brac-ing drywall, wallpaper, paint.

Item Size (DxL) inches Order #Wall Unit 6 80010600Wall Unit 7 80010700*Wall Unit 8 80010800Thimble 6x8 80100608Thimble 7x8 80100708*Thimble 8x8 80100808Thimble 6x12 80100612Thimble 7x12 80100712Thimble 8x12 80100812

INSUL-FLUE

HEARTH ACCESSORIES

Telescopic Stove Pipe - 24 ga.

30” to 56”Stock # SizeBM0123 6” BM Telescopic Stove PipeBM0125 8” BM Telescopic Stove Pipe

Stove Top Drip FreeConnector - 24 ga.

Stock # SizeBM0314 6” x 4” BM Adapter

Slip Connector- 24 ga.

Stock # SizeBM0042 6” x 12” BM Connector BM0043 7” x 12” BM Connector BM0044 8” x 12” BM Connector

Botanical Pipe-Sham

Stock # SizeSP-10-6 6” SectionSP-10-9 9” SectionSP-10-12 12” SectionSP-10-24 24” SectionSP-10E Elbow

Pipe-Shams from Minuteman International are designed to fit a standard 6” - 6 5/8” stove pipe

and come in four lengths plus an elbow.

Finish: Graphite Powdercoat

*Special Order

Oval to RoundTapper

QA Atlantic Adapter9” x 3/4” Oval Base7-3/8” x 4-1/2” Oval Top16” High

143

A draft control is a simple solution to a complex problem. The draft con-trol provides for a con-sistent, stable air supply for efficient burn in wood stoves, oil fired furnaces, boilers, space heaters and camp stoves. The most popular draft control on the consumer market is the B-34TJ.

B34TJ05B 5”B34TJ06B 6”B34TJ07B 7”B34TJ08B 8”

Recommended to protect existing fire-place mantels from heat generated by

fireplace-insert stoves. Kit includes 47” long mantel protector, all mounting

hardware, and instructions

Part # Finish Qty.MNTL Black oxide 1

Insulated Chimney

Plug

Size (DxL) Minimum Maximum Order # inches 6 6 6.375 810106 7 6.75 7.125 810107 8 7.75 8.125 810108

Note: Used to seal up an old thimble home. Insert plug in old thimble hole and tighten expansion bolt on face. Insulation expands causing a tight fit. Constructed of ceramic fiber insulation material.

Part # DescriptionBM0234 90° Stove Pipe Elbow Heat Shield Black Pebble FinishBM0133 Adj. Stove Pipe Heat Shield Black Pebble Finish

The adjustable telescopic feature of the Imperial Stove Pipe Heat Shield allows you to extend the length from 22-1/2” to 42”.

Both Imperial UL/ULC listed Stove Pipe and 90° Elbow Heat Shields are adaptable to 5”, 6”, 7” and 8” stove pipe.

They protect walls and ceilings where clearances between flue pipe and walls have been reduced by the use of stove boards.

DRAFT CONTROL

MANTLE PROTECTOR

GALVANIZED FITTINGS

INSUL-PLUG IMPERIAL PIPE & ELBOW SHIELDS

S #335 STORM COLLAR 4-335 4” 6 5-335 5” 12 6-335 6” 12 7-335 7” 12 8-335 8” 12

#1200 ADJUST. ROOF FLASHING 0/12-6/12

4-1200 4” 6 5-1200 5” 6 6-1200 6” 6 7-1200 7” 6 8-1200 8” 6

#327 SHANTY CAP 3-327 3” 12 4-327 4” 12 5-327 5” 12 6-327 6” 12 7-327 7” 12 8-327 8” 12

#315 THIMBLES 6X12 - 315 6X12 12 8X12 - 315 8X12 12

#315 ADJUSTABLE THIMBLEGV0926-C 6” - 7” - 8”

144

An intelligent solution for make-up air. Filtered. Adjustable. Draft-free. The solution your customers will love to live with.

• Tough molded ABS Polymer• UV and temperature stable• Condensate resistant• Sound dampening• Three year warranty• Complete with 2 tubes, dust filter and hardware pack

ASV Dimensions Interior Cover size 6” x 6” x 2” Exterior Grille size 5 1/2” x 5 1/2” Tube dimension (2) 4” dia. x 6” long

Draft failure. Poor Performance. Moisture or odor problems. Dangerous build-up of carbon monoxide. All this can result from inadequate ventilation.

Today’s homes are tighter. Even the best equipment, properly installed, will fail to operate as intended in an air-starved envi-ronment.

Wood or gas... vented or vent-free... EVERY combustion appliance needs fresh air and balanced pressure.

If you’re installing any equipment or appliance that uses oxygen or removes air from the home, you need to plan ventila-tion into the job. You need the ASV-90.

ASV-90 Air Supply Ventilator

AIR SUPPLY VENTILATOR

CHIM-A-LATOR DELUXEThe Stainless Steel Adjustable, Top-Sealing

Fireplace DamperThe Chim-A-Lator Deluxe easily mounts on top od a masonry fireplace flue and is oper-ated by a convenient, adjustable regulator installed on the side wall of the fireplace. It is far more efficient than conventional cast iron dampers and the ideal replacement for old defective dampers. Proven for over 30 years to be the most trouble-free top sealing damper.

Use Outside Dimensions of Flue Tile Flue Width Length Order Size (from-to) (from-to) No. 8 x 8 7 - 9.25 9 - 9.25 50808 8 x 13 7 - 9.25 11 - 13.5 50813 8 x 18 7 - 9.25 16 - 18.25 50818 * 8 x 20 7 - 9.25 18 - 20.25 50820 * 10 x 18 8 - 10.25 16 - 18.25 51018 * 12 x 12 10 - 12.25 10 - 12.25 51212 13 x 13 11 - 13.5 11 - 13.5 51313 12 x 16 10 - 12.5 14 - 16.25 51216 13 x 18 11 - 13.5 16 - 18.25 51318 13 x 21 11 - 13.5 19.5 - 22 51321 * 16 x 16 14 - 16.25 14 - 16.25 51616 * 16 x 20 14 - 16.25 18 - 20.25 51620 * 18 x 18 16 - 18.25 16 - 18.25 51818 * 18 x 21 16 - 18.25 19.5 - 22 51821 * 20 x 20 18 - 20.25 18 - 20.25 52020 * 20 x 24 18 - 20.25 22 - 24.25 52024 * 24 x 24 22 - 24.25 22 - 24.25 52424 *

Stainless Steel Insert Offset Adaptor

Insert Adaptors are made from type 316L Stainless Steel.Adjustable a full 6” from front to backLow profile (only 3” box height) List5350906 6”5350908 8”

INSERTADAPTOR

*Special Order

145

CHIMNEY CAPSQuality Stainless Steel and Black Galvanized Chimney Caps

Black Galvanized Steel Chimney Caps - SquareUse Outside Dimensions (in) 3/4” Mesh Chimney Caps

Flue Width Length Order Size (from-to) (from-to) No. 8 x 8 7 - 9.25 9 - 9.25 330808 8 x 13 7 - 9.25 11 - 13.5 330813 8 x 18 7 - 9.25 16 - 18.25 330818 12 x 12 10 - 12.25 10 - 12.25 331212 13 x 13 11 - 13.50 11 - 13.50 331313 12 x 16 10 - 12.50 14 - 16.25 331216 13 x 18 11 - 13.50 16 - 18.25 331318 16 x 16 14 - 16.25 14 - 16.25 331616 16 x 20 14 - 16.25 18 - 20.25 331620 * 18 x 18 16 - 18.25 16 - 18.25 331818 20 x 20 18 - 20.25 18 - 20.25 332020 * 20 x 24 18 - 20.25 22 - 24.25 332024 * 24 x 24 22 - 24.25 22 - 24.25 332424 *

Stainless Steel Chimney Caps - SquareUse Outside Dimensions (in) 3/4” Mesh Chimney Caps

Flue Width Length Order Size (from-to) (from-to) No. 5 x 8 4 - 6.25 7 - 9.25 430508 8 x 8 7 - 9.25 9 - 9.25 430808 8 x 13 7 - 9.25 11 - 13.5 430813 8 x 18 7 - 9.25 16 - 18.25 430818 12 x 12 10 - 12.25 10 - 12.25 431212 13 x 13 11 - 13.50 11 - 13.50 431313 12 x 16 10 - 12.50 14 - 16.25 431216 13 x 18 11 - 13.50 16 - 18.25 431318 16 x 16 14 - 16.25 14 - 16.25 431616 * 16 x 20 14 - 16.25 18 - 20.25 431620 18 x 18 16 - 18.25 16 - 18.25 431818 20 x 20 18 - 20.25 18 - 20.25 432020 * 20 x 24 18 - 20.25 22 - 24.25 432024 * 24 x 24 22 - 24.25 22 - 24.25 432424 *

Stainless Steel Crown Mounted Caps Screen Size Order # Cover Size

One-Piece Assembled Caps 14 x 14 491414 12 x 23 17 x 17 491717 23 x 23

Knocked Down Caps 14 x 19 491419 20 x 29 14 x 21 491421 20 x 29 14 x 23 491423 20 x 29 14 x 25 491425 20 x 35 14 x 27 491427 20 x 35 14 x 29 491429 20 x 35 14 x 31 491431 20 x 41 14 x 33 491433 20 x 41 14 x 35 491435 20 x 41 14 x 37 491437 20 x 47 14 x 39 491439 20 x 47 14 x 41 491441 20 x 47 17 x 25 491725 23 x 35 17 x 27 491727 23 x 35 17 x 29 491729 23 x 35 17 x 31 491731 23 x 41 17 x 33 491733 23 x 41 17 x 35 491735 23 x 41 17 x 37 491737 23 x 47 17 x 39 491739 23 x 47 17 x 41 491741 23 x 47

*Special Order

Note: Leg Kits #390004

Note: Leg Kits #390004

Note: Order by Screen DimensionsLips with Holes are 1.25” Wide

Note: Bolt together corners on knocked down caps for aded strength

146

How to order a custom chimney cover:

HY-C Company, Inc.

1. Determine what style of chimney cover that you would like to order:Band-Around Brick: (BAB) Aluminum or Stainless Steel• Measure the outside dimension of the top row of bricks on all four

sides of the chimney, (see illustration #1).• Measure the tile height from the top of the first row of brick to the top

of the tallest tile, (see illustration #2).

Skirt Type: (SKIRT) Aluminum only• Measure the outside dimension of the top row of bricks on all four

sides of the chimney, (exact measurements are very important), (see illustration #1).

• Measure the tile height from the top of the first row of brick to the top of the tallest tile, (see illustration #2).

Clamp - to-Tile: (CTT) & Cement-on: (CMNT) Aluminum Only• Call HY-C Company (Customer Service Department), 1-800-325-7076, for

specific instructions for these style of cover.

2. Calculate your cost on the cover by using the formula and guidelines below:Add the width and the length of the cover together to determine the sum, multiply the sum by the appropriate factor on the chart below (round the length and width up to the nearest whole number for pricing).Width (W) + Length (L) = Sum (S) or W + L = SSum (S) x Factor (F) or S x F = Cost

Standard 8” or 9” Braces- Use Regular Formula to Determine Cost 12” Braces- Add 18% to Formula Cost, (multiply by 1.18) 15” Braces- Add 20% to Formula Cost, (multiply by 1.20) 18” Braces- Add 22% to Formula Cost, (multiply by 1.22)

Examples: Aluminum Cover - W = 18”, L = 32”, with std. Braces 18 + 32 = 50 then 50 x 3.10 = $155.00

Stainless Steel Cover - W = 27”, L = 61”, with std. Braces 27 + 61 = 88 then 88 x 6.00 = $528.00

Aluminum Cover - W = 22”, L = 54”, with 15” Braces 22 + 54 = 76 then 76 x 2.91 = $221.16 then $221.164 x 1.20 = $265.39

ALL CUSTOM COVERS SHIPPED KNOCKED-DOWNFor pricing information on cover szes not shown on the chart or any other questions, please call: 1-800-522-8216

CHIMNEY CHIMNEY WIDTH LENGTH Less than 48” 15” to 24” 48” to 70” 70” to 89” Less than 48” 24” to 32” 48” to 70” 70” to 89” Less than 48” 32” to 39” 48” to 70” 70” to 89” MINIMUM CHARGE

Band-Around Brick: (BAB) Aluminum or Stainless Steel

Skirt Type: (SKIRT) Aluminum only

Clamp - to-Tile: (CTT)Aluminum Only

Cement-on: (CMNT) Aluminum Only

Illustrations 1-3#1 36 1/2”

36”

23”

23 1/2”TILE TILE TILE

#2

9” Braces

#3

2” Braces 5” Braces 8” Braces

9” 12”6” 9”

3 1/2” 6”3 1/2”

8” Braces 2” Braces 5” Braces

9” 12”6 1/2” 9”6 1/2”

CUSTOM MADE CHIMNEY COVERS

147

Through-the-Wall Kit Through-the-Wall Kit contains stainless steel cap, tee assembly, round flashing, round storm collar, wall support, painted wall thimble, and three support bracket assemblies.

6HS-TWK 38.5 lbs.8HS-TWK 46.8 lbs.

Open Beam Kit - Cathedral CeilingsThe Open Beam Kit contains stainless steel round cap, round flashing, round storm collar, roof support, and single-wall adapter.

6HS-RKRS 18.5 lbs.8HS-RKRS 19.5 lbs.

CHIMNEY KITSRound Kit - Flat CeilingsThe Round Kit contains stainless steel round cap, round flashing, round storm collar, ceiling support, and single-wall adapter.

6HS-RKS 12.3 lbs.8HS-RKS 13.3 lbs.

Round Cap Ceiling Support

Round Flashing

Single-wall Adapter Round Storm Collar

Round Cap

Round FlashingSingle-wall

AdapterRound Storm Collar

18” Standard Roof Support

Round Cap

Round Flashing

Round Storm Collar Round Storm Collar

Three Support Bracket Assemblies Wall

Thimble

Tee Assembly

Call 1-800-522-8216 for All Fuel Catalog

148

ALL FUEL CHIMNEYS


149

AmeriVent All Fuel ChimneyModel HS Part Pcs/ Lbs/ Description No. Ctn. Ctn.Chimney Sections - 6” Length 6HS-6 1 5.0 - 12” Length 6HS-12 1 5.0 - 18” Length 6HS-18 1 7.0 - 24” Length 6HS-24 1 10.0 - 36” Length 6HS-36 1 13.5 - 48” Length 6HS-48 1 20.0Chimney Tee Assembly w/Cap 6HS-TA 1 14.0Tee Cap 6HS-TCAP 1 0.3Wall Thimble (painted) 6HS-WTP 1 5.515° Offset (use in pairs/2/ctn.) 6HS-015 pr. 6.3 pr.30° Offset (use in pairs/2/ctn.) 6HS-030 pr. 8.3 pr.Firestop Assembly 6HS-FSA 6 12.0Support Bracket Assembly 6HS-SBA 1 2.0Wall Support w/Clean-out 6HS-WS 1 5.0Ceiling Support Assembly 6HS-CSA 1 5.3Pipe End Plate 6HS-EP 1 1.0Roof Support Assemblies Flat to 12/12 Pitch 6HS-RSA12 1 10.0 13/12 to 24/12 Pitch 6HS-RSA24 1 17.0Wall Face Plate 6PL-WFP-BK 1 3.0Anchor Plate 6HS-AP 1 3.0Adjustable Roof Support Assem. 6PL-ARSA 1 3.5Round Adjustable Face Plates Flat to 2/12 Pitch 6PL-R2FP-BK 1 6.8 3/12 to 4/12 Pitch 6PL-R4FP-BK 1 6.8 5/12 to 6/12 6PL-R6FP-BK 1 6.8 7/12 to 8/12 6PL-R8FP-BK 1 6.8 11/12 to 24/12 6PL-R12FP-BK 1 6.8Ceiling Support Face Plate 6HS-CSFP 1 1.5Roof Support Face Plate 6HS-RSFP 1 1.0Square Adjustable Face Plate 6PL-SAFP-BK 1 6.8Cap - Multi-purpose 6PL-MPC 1 3.0Storm Collar - Galvanized Adjust PL-ASCWG 1 0.5Round Flashings Std. Flat to 6/12 pitch - 4” Skirt 6F 4 2.3 Flat to 6/12 pitch - 6” Skirt 6FFU 6 3.3 7/12 to 12/12 Pitch 6” Skirt 6FFU12 1 7.5 13/12 to 18/12 Pitch 6” Skirt 6FFU18 1 8.5 19/12 to 24/12 Pitch 6” Skirt 6FFU24 1 10.0Tall Cone Flashing 6FT 4 4.0Attic Insulation Shield 6HS-AIS 1 12.0Single-Wall Adapter 6SWA 1 0.5Roof Brace Kit 6HS-RBK 1 8.0

6”AmeriVent All Fuel ChimneyModel HS Part Pcs/ Lbs/ Description No. Ctn. Ctn.

Chimney Sections - 6” Length 8HS-6 1 7.0

- 12” Length 8HS-12 1 7.0

- 18” Length 8HS-18 1 9.0

- 24” Length 8HS-24 1 13.0

- 36” Length 8HS-36 1 17.0

- 48” Length 8HS-48 1 26.0

Chimney Tee Assembly w/Cap 8HS-TA 1 19.0

Tee Cap 8HS-TCAP 1 0.3

Wall Thimble (painted) 8HS-WTP 1 5.5

15° Offset (use in pairs/2/ctn.) 8HS-015 pr. 7.5 pr.

30° Offset (use in pairs/2/ctn.) 8HS-030 pr. 10.0 pr.

Firestop Assembly 8HS-FSA 6 12.0

Support Bracket Assembly 8HS-SBA 1 2.5

Wall Support w/Clean-out 8HS-WS 1 6.0

Ceiling Support Assembly 8HS-CSA 1 5.3

Pipe End Plate 8HS-EP 1 1.0

Roof Support Assemblies

Flat to 12/12 Pitch 8HS-RSA12 1 8.5

13/12 to 24/12 Pitch 8HS-RSA24 1 17.0

Anchor Plate 8HS-AP

Adjustable Roof Support Assem. 8PL-ARSA 1 3.5

Round Adjustable Face Plates

Flat to 2/12 Pitch 8PL-R2FP-BK 1 6.8

11/12 to 24/12 8PL-R12FP-BK 1 6.8

Wall Face Plate 8PL-WFP-BK 1 3.0

Ceiling Support Face Plate HS-CSFP 1 1.5

Joist Sheild 8HS-JS 1 6.0

Roof Support Face Plate HS-RSFP 1 1.0

Square Adjustable Face Plate PL-SAFP-BK 1 6.8

Cap - Multi-purpose 8PL-MPC 1 3.0

Storm Collar - Galvanized Adjust PL-ASCWG 1 0.5

Round Flashings

Std. Flat to 6/12 pitch - 4” Skirt 8F 4 3.5

Flat to 6/12 pitch - 6” Skirt 8FFU 6 4.5

7/12 to 12/12 Pitch 6” Skirt 8FFU12 1 8.0



Tall Cone Flashing 8FT 4 5.0

Attic Insulation Shield 8HS-AIS 1 13.3

Single-Wall Adapter 8SWA 1 0.5

Anchor Plate 8HS-AP 1 4.5

Roof Brace Kit 8HS-RBK 1 8.0

8”


150

Size Order #3 inch diameter x 25 ft 985103254 inch diameter x 25 ft 985104255 inch diameter x 25 ft 98510525*6 inch diameter x 25 ft 985106256 inch diameter x 35 ft 985106357 inch diameter x 25 ft 98510725*8 inch diameter x 25 ft 98510825

STAINLESS STEEL FLEXIBLE LINER KIT

Size Order # Size4” 4454SS 4” to 4.25 Flex5” 4555SS 5” to 5.25 Flex6” 4656SS 6” to 6.25 Flex7” 4757SS 7” to 7.25 Flex8” 4858SS 8” to 8.25 Flex

Size Order #6” 4609 FLEX8” 4809 FLEX

Size Order #6” 4610 FLEX7” 4710 FLEX8” 4810 FLEX

Size Order #5” 4511 FLEX6” 4611 FLEX7” 4711 FLEX8” 4811 FLEX

Size Order #6” 4614 FLEX7” 4714 FLEX8” 4814 FLEX

Stainless Steel Two-Piece Flex Tee Kit (Type 316L)

15° 304SS Standard to Flex Elbow



304SS Flex Adapter


Note: Kit includes: 25' S.S. Flexible Liner, Termination Cap, 13x13 Top Plate. 2-piece Flex Tee, Flex Tee Cap

Size Order #3” 3AFL-NC4” 4AFL-NC5” 5AFL-NC6” 6AFL-NC7” 7AFL-NC8” 8AFL-NC

Nose/Pull Cones

*Special Order

151

STAINLESS STEEL LINERS

24 Ga. Two-Piece Flex Tee (Type 316L)Size Order #5 98630105*5.5 986301055*6 986301067 98630107*8 98630108

Pellet ClampThis 304 stainless steel clamp is used to provide an airtight seal between a tee (or coupling) and the exhaust outlet on a pellet stove.

4307 3” diameter4407 4” diameter

Pellet Coupling/IncreaserThis fitting will connect round flex pipe to round flex pipe. Double wall construction eliminates air leakage at seams.Available in 3” or 4” diameter. 5305 3” diameter5405 4” diameter

Pellet TeeUsed to connect a pellet stove to flex pipe. Double wall construction eliminates air leakage at seams. Avail-able in 3” or 4” diameter.5302 3”5402 4”

Pellet Increaser TeeUsed to connect a 3” pel-let stove to 4” flex pipe. Double wall construction eliminates air leakage at seams.

5432 3” x 4”

Also available as a 3” to 4” increaser. 5407

*Special Order

24 Ga. Universal Con-nector (Type 316L)

Size Order #5 98531005*5.5 985310055*6 985310067 98531007*8 98531008

Flexible to Flexible Stainless Steel Adapter

Size Order #6 5350068 535008

Stainless Steel Support Plate - 18 Gauge 6” Collar

Size Order #9”x9” 6810069”x13” 68120613”x13” 68140613”x18” 68170618”x18” 68190624”x24” 682406

Use Outside Dim. 3/4” MeshFlue Tile OD Order # Size (From - to)6” 6.125” - 7” 340006 7” 7.125” - 8” 340007 8” 8.125” - 9” 340008 9” 9.125” - 10” 340009 10” 10.125” - 11” 340010 11” 11.125” - 12” 340011 12” 12.125” - 13” 340012 13” 13.125” - 14” 340013 14” 14.125” - 15” 340014 15” 15.125” - 16” 340015 16” 16.125” - 17” 340016 17” 17.125” - 18” 340017 18” 18.125” - 19” 340018

Use Outside Dim. 3/4” MeshFlue Tile OD Order #Size (From - to)6” 6.125” - 7” 440006 7” 7.125” - 8” 440007 8” 8.125” - 9” 440008 9” 9.125” - 10” 440009 10” 10.125” - 11” 440010 11” 11.125” - 12” 440011 12” 12.125” - 13” 440012 13” 13.125” - 14” 440013 14” 14.125” - 15” 440014 15” 15.125” - 16” 440015 16” 16.125” - 17” 440016 17” 17.125” - 18” 44001718” 18.125” - 19” 440018

Stainless Steel Chimney Cap – Round Black Galvanized Chimney Cap – Round

152

Reduces Smoke Roll Out Stock # Color Height WeightFSG-BLK Black 4.5” 5FSG-BLK-6 Black 6” 6FSG-BLK-8 Black 8” 7FSG-BRS Brass 4” 5

FIREPLACECLOSURE HOOD

MATCH HOLDERS

Wrought Iron Match HoldersFinish: Graphite PowdercoatMH-01 Maple Leaf; 14-1/2”HMH-30 Twisted Rope; 3”W x 3”D x 9”H

Polished Solid Brass Match HoldersX800204 13”HX304160 8-1/2”H; Oak Base

MH-01 MH-30 X800204 X304160

CC1 12"CC2 24"CC3 36"

Made of Heavy Gauge Galvanized Steel. Place up the roof from your chimney or vent pipe to help protect it from sliding snow and ice. 2" turned edge for fastening to roof.

CHIMNEY CRICKET

Order # Fits Liner Sizes519007 4” - 7”519011 8” - 9”

Order # Size - Inches Fits Liner Sizes517022 .25 x 22 5, 6 inch517025 .25 x 25.5 7 inch517029 .25 x 29 8 inch518022 .5 x 22 5, 6 inch518025 .5 x 25.5 7 inch518029 .5 x 29 8 inch

Stainless Wire Mesh - 25’ Rolls 8 lb. Ceramic Wool Insulation Blanket Foil Faced 25’ Rolls

Description Order #2” x 50 Yard 517001

Foil Tape

153

WOODFlexLine™ fireplace connector system provides a safe and reliable connection between a woodburn-ing stove and a masonry fireplace. Each system has been carefully tested and listed by UL to assure proper design and consistent construction. All of the parts needed for one complete installation are included in each FlexLine™ system. The connec-tor systems accomodate oval, round or rectangular stove outlets and usually install without any altera-tion of the fireplace. The fireplace connector easily passes through the damper frame and extends into the first clay liner as required by N.F.P.A. 211. When a total reline is desired, reline pipe and fittings can be added to the system.All components in the FlexLine™ system are manu-factured out of 304 stainless steel* for guaranteed long life and durability.

* Block-off plate is 22 ga. aluminized steel.

Model 4876 Fireplace Connector with Reline

Model 4808 Fireplace Connector with Clay Liner Plate

Each connector kit contains 4’ of oval flex pipe, a 48” block-off plate, Owens-Corning™ hi-temp gasket, stove fitting, support poles and hardware.

FIREPLACE CONNECTOR SYSTEMS

Model 4706Has a 8” x 16” x 1-1/2” insert fitting. Oval flex pipe is 4-1/4” x 9-1/2” x 4’. (33 sq. in. area).Model 4880AHas a 8” x 16” x 1-1/2” insert fitting. Oval flex pipe is 4-1/2” x 11” x 4’. (41 sq. in. area).Model 4808Has a 10-1/2” x 18” x 1-1/2” in-sert fitting. Oval flex pipe: 4-1/2” x 14-1/4” x 4’. (55 sq. in. area).

FlexbootOval-to-round fitting used to connect a Flex-Line™ to rigid reline pipe. Smallest transition part on the market.4096 small4138A large

Model 4876Has a 6” round inlet (28 sq. in. area). Oval flex pipe is 4-1/4” x 9-1/2” x 4’.Model 4877Has a 7” round inlet (33 sq. in. area). Oval flex pipe is 4-1/4” x 11” x 4’.Model 4888Has a 8” round inlet (50 sq. in. area). Oval flex pipe is 4-1/4” x 14-1/4” x 4’.

Model 4866Has a 6” oval inlet (26 sq. in. area). Oval flex pipe is 4-1/4” x 7-3/4” x 4’.

Model 4886Has a 8” oval inlet (41 sq. in. area). Oval flex pipe is 4-1/2” x 11” x 4’.

Model 4875Has a 6” round inlet (28 sq. in. area). Oval flex pipe is 4-1/4” x 9-1/2” x 4’.

Model 4885Has a 8” round inlet (50 sq. in. area). Oval flex pipe is 4-1/2” x 11-1/4” x 4’.

Model 4803 has a 3” round inlet (9.4 sq. in. area). Flex pipe is 3”x6’.

Model 4804has a 4” round inlet (12.6 sq. in. area). Flex pipe is 4 “ x 6’.

154

Making Eco-Friendly FuelsFriendlier To Use

Gasket-sealed connections save time:Bio VentTM from Bernard Dalsin Manufacturing has been specifically designed to seal without caulking during installation. Using an exclusive pre-installed gasket, Bio VentTM pellet stove venting products install in a fraction of the time of other conventional venting products.

Super-corrosion-resistant metalreduces callbacks:Now you can sell corn-fueled pellet stoves with confidence. All Bio VentTM products are con-structed with AL29-4C 26-gauge Super-Ferrite Stainless Steel – a premium blend of metal that can withstand exhaust that turns other metal to powder! Put simply, that means you won’t be called back next year to replace stove venting when your customer burns corn or corn-wood mix fuel pellets.

3” Clearance (USA and Canada)

Bio VentTM Product Line is available in galva-nized and powder coated (black) finishes. Kits Available. Call for details.

BIOVENT CORN/PELLET VENTING

Rigid PipeAdjustable Length Pipe45° and 90° Elbows

Tee and End CapAppliance AdaptorCathedral Ceiling Kit

Telescoping Wall ThimbleFlat Ceiling Firestop SupportAdaptor Increaser

Inside Decorator CollarOutside Wall FlashingAdjustable Wall Straps

Vent CapsWall Vent KitFlat Ceiling Vent KitFresh Air Intake Kit

Wall Vent KitOrder # Size711403KT 3”711404KT 4”

Kit Includes: Horizontal Jet Cap, Telescoping Wall ThimbleOutside Wall Flashing, Inside Decorator Collar, Appliance Adaptor

Flat Ceiling Vent KitOrder # Size713003KT 3”713004KT 4”

Kit Includes: Vertical Vent Cap, Flat Ceiling Firestop SupportInside Decorator Collar, Support Clamp, Vent Tee

Call 1-800-522-8216 for BioVent Literature

Diameter / Take Off Order #3” /2” 714402034”/2” 714402043”/3” 714403034”/3” 71440304

Deluxe TerminatorNote:Length = 24”Fresh air brought in between inner and outer tube.Includes 2.5’ of aluminum flexPackaged 6 per carton

155

CORN/PELLET VENTING Description Part # CntPipe - 3” Dia. x 6” 71010603 6Pipe - 3” Dia. x 6” Black 71010603B 6Pipe - 3” Dia. x 12” 71011203 6Pipe - 3” Dia. x 12” Black 71011203B 6Pipe - 3” Dia. x 18” 71011803 6Pipe - 3” Dia. x 18” Black 71011803B 6Pipe - 3” Dia. x 18” SS 71011803SS 6Pipe - 3” Dia. x 24” 71012403 6Pipe - 3” Dia. x 24” Black 71012403B 6Pipe - 3” Dia. x 36” 71013603 6Pipe - 3” Dia. x 36” Black 71013603B 6Pipe Adjustable 3” x 12” 71011103 6Pipe Adjustable 3” x 12” Blk 71011103B 645° Elbow 3” Dia 71024503 645° Elbow 3” Dia Black 71024503B 690° Elbow 3” Dia 71029003 690° Elbow 3” Dia Black 71029003B 6Adj. Flashing & Collar 71410104 ea.Vertical Cap 71040103 6Horizontal Jet Cap 71030203 6Horizontal Cap 71030103 6Appliance Adapter 71080003 6Appliance Adapter Black 71080003B 6Harman Adapter 71080003HS 6Harman Adapter Black 71080003BHS 63” ECOTECK Adapter Black 71080003ETB3” x 3” Flex Adapter 71094303 63” x 4” Flex Adapter 71094304 6Increaser 3” to 4” 71090304 6Increaser 3” to 4” Black 71090304B 6Ceiling Support/Firestop 71201203 ea.Vertical Support Clamp 71210003 6Cathedral Ceiling Support 712603KY ea.Wall Thimble 71101203 3Inside Decorator Plate 71111203 6Outside Wall Flashing SS 71121203 63” x 3” Tee w/Cap 71050303 33” x 3” Tee w/Cap Black 71050303B 33” x 4” Tee w/Cap 71050304 33” x 4” Tee w/Cap Black 71050304B 33” Starter Tee w/Cap 71050303ST 33” Starter Tee w/Cap Black 71050303STB 33” x 4” Starter Tee w/Cap 71050304ST 33” x 4” Starter Tee w/Cap Blk 71050304STB 33” End Cap 71060003 63” Wall Strap/Support 71220103 63” to 6” Class-A Adap 71092603 13” to 8” Class-A Adap 71092803 1Tee Support Bracket 712301033” Replacement Gasket 71400104

Description Part # CntPipe - 4” Dia. x 6” 71010604 6Pipe - 4” Dia. x 6” Black 71010604B 6Pipe - 4” Dia. x 12” 71011204 6Pipe - 4” Dia. x 12” Black 71011204B 6Pipe - 4” Dia. x 18” 71011804 6Pipe - 4” Dia. x 18” Black 71011804B 6Pipe - 4” Dia. x 18” SS 71011804SS 6Pipe - 4” Dia. x 24” 71012404 6Pipe - 4” Dia. x 24” Black 71012404B 6Pipe - 4” Dia. x 36” 71013604 6Pipe - 4” Dia. x 36” Black 71013604B 6Pipe Adjustable 4” x 12” 71011104 6Pipe Adjustable 4” x 12” Blk 71011104B 645° Elbow 4” Dia 71024504 645° Elbow 4” Dia Black 71024504B 690° Elbow 4” Dia 71029004 690° Elbow 4” Dia Black 71029004B 6Adj. Flashing & Collar 71410105 ea.Vertical Cap 71040104 6Horizontal Jet Cap 71030204 6Horizontal Cap 71030104 6Appliance Adapter 71080004 6Appliance Adapter Black 71080004B 64” x 4” Flex Adapter 71094404 64”Travis Adapter Black 71080004TRVB4”Travis Adapter Galvanized 71080004TRVCeiling Support/Firestop 71201204 ea.Vertical Support Clamp 71210004 6Cathedral Ceiling Support 712604KY ea.Wall Thimble 71101204 3Wall Thimble Ext. 71101201 Inside Decorator Plate 71111204 6Outside Wall Flashing SS 71121204 64” x 4” Tee w/Cap 71050404 34” x 4” Tee w/Cap Black 71050404B 34” Starter Tee w/Cap 71050404ST 34” Starter Tee w/Cap Black 71050404STB 34” End Cap 71060004 64” Wall Strap/Support 71220104 64” to 6” Class-A Adap / Thimble 71092604 14” to 8” Class-A / Thimble 7109284 14” Replacement Gasket 71400104

Fresh Air Intake KitOrder # Size71450002 2”71450003 3”952702255 2”x25’ Air Intake

Kit Includes: 5’ of Alum Flex Liner, Vent Hood, Flex Decorator Collar

3” 4”

Call 1-800-522-8216 for BioVent Literature

156

Outside Air Intake Regulator for Masonry Fireplaces

Type “AD” Air-A-Lator® for Existing Fireplaces Dimensions Order # 18”x13.5”x2.75” 221418

Note:Type “AD” is designed for any fireplace with an ash dump and a clean-out door.It simply slides into your fireplace over your open ash pit doors and your ash dump pro-vides passage for outside air.18 gauge galvanized powder coated – black

FeaturesExclusive Dual Damper System gives you complete control of combustion air. Other outside air intakes just let you control the volume of air. The Air-A-Lator® Dual Damper System gives you control not only of volume of air, but it also lets you control the direction of air. Both are necessary to produce the proper flames and control the rate of burning.

Helps stop backdraft smoking caused by negative pressure in the home.

Provides safety from dangerous carbon monoxide fumes. The use of an Air-A-Lator® in your fireplace helps prevent great amounts of air from being drawn out of your home. This reduces oreliminates the chance of drawing carbon monoxide fumes from household heating appliances — a growing prob-lem as homes become more air-tight.

Less heat loss for more energy savings. Instead of drawing heated air from inside your home, Air-A-Lator® takes outside air and directs it right where it’s needed.

Reduces pollution, ashes and customer complaints. When your fire burns more completely you’ll have much less ash and smoke both in the air and in your home.

For optimum efficiency Air-A-Lator ® should be installed in the front row of brick in center of fireplace with opening facing fire or grate.

Fire burns warmer, cleaner, and safer because regulated outside air is used for combustion. Air follows built-in passage under your fireplace

“Mason’s Choice”(on side wall)

Air-A-Lator® for New ConstructionType Dimensions Order #NH 13.5”x4.5”x2.75” 2004141B 9”x4.5”x2.75” 210409

Note:Type “NH” & “1B” for NewConstructionType “1B” is the size of one brick and has the same advanced qualities as type “NH”.18 gauge galvanized powder coated – black10 per case

Slip In Air-A-Lator® for New Construction or RetrofitType Dimensions Order #NH 13.5”x4.5”x2.75” 2204141B 9”x4.5”x2.75” 220409

Note:Type “NH” & “1B” for New Construction or RetrofitType “1B” is the size of one brick and has the same advanced qualities as type “NH”18 gauge galvanized powder coated – black10 per case

The “Mason’s Choice” Stainless Steel Side Wall Outside Air KitInner Dimensions Order #3” 2303304” 230430

Note:Telescopes 14” to 28”Elbow adjusts 90° to 180°26 gauge stainless steel (type 304)Wall vent hood includes screen.

Aluminum Closable Louver and Optional Round AdapterDimensions (WxH) Order #8”x8”Louver 2608086” Round Adapter 270806

Note: Specify if you want adapter riveted to louver. Includes Screen; 10 per case

Aluminum Brick Louver – FixedDimensions (WxH) Order #2.25”x8” 260802

Note: Includes Screen

Ash Dump CoverDimensions (WxH) Order #4.5”x9” 2445099”x9” 2409096.5”x8” 246508

no more smoke filled rooms! “it’s not the...

Documents